STC Test Report - DONGGUAN DAXIAN LIGHT ...STC Test Report For and on behalf of STC (Dongguan)...

STC Test Report

STC (Dongguan) Company Limited

68 Fumin Nan Road, Dalang, Dongguan, China. (Zip Code : 523 770) Tel : (86 769) 8111 9888 Fax : (86 769) 8111 6222 E-mail : [email protected] Homepage : www.dgstc.org

This report shall not be reproduced unless with prior written approval from STC (Dongguan) Company Limited.

For Conditions of Issuance of this test report, please refer to the overleaf or Homepage.

Date: 2016-10-11 of 14

No.: DM125281

Applicant: Dongguan Daxian Light Technology Co., Ltd.

Floor2, No.2, Liyuan Road, Xuzhen, Zhangmutou Town, Dongguan City, China

Description of Sample(s): Submitted sample(s) said to be Product: LED Strip Light Brand Name:

Model No.: DX-5730-60D-10MM Date Sample(s) Received: 2016-09-21 Date Tested: 2016-09-29 Investigation Requested: Test for compliance with EMC requirements of AS/NZS

CISPR 15. Conclusion(s): The submitted product COMPLIED with the requirements

of AS/NZS CISPR 15: 2011. The EMC tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report.

Remark(s): For additional model(s) details, see page 3

LONG Yun Jian, Along Authorized Signatory

ElectroMagnetic Compatibility Department For and on behalf of


STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

CONTENT:

Cover Page 1 of 14 Content Page 2 of 14

1.0 General Details 1.1 Equipment Under Test [EUT] Page 3 of 14 Description of Sample(s) 1.2 Date of Order Page 3 of 14

1.3 Submitted Sample(s) Page 3 of 14

1.4 Test Duration Page 3 of 14 1.5 Country of Origin Page 3 of 14 2.0 Technical Details 2.1 Investigations Requested Page 4 of 14 2.2 Test Standards and Results Summary Page 4 of 14 3.0 Test Results 3.1 Emission Page 5-11 of 14

Appendix A

List of Measurement Equipment Page 12 of 14 Appendix B Photograph(s) of Product Page 13- 14 of 14

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

1.0 General Details

1.1 Equipment Under Test [EUT]

Description of Sample(s) Product: LED Strip Light Manufacturer: Dongguan Daxian Light Technology Co., Ltd.

Floor2, No.2, Liyuan Road, Xuzhen, Zhangmutou Town, Dongguan City, China

Brand Name:

Model Number: DX-5730-60D-10MM Additional Model

Number: DX-2835-30D-5MM, DX-2835-30D-8MM, DX-2835-30D-10MM, DX-2835-45D-5MM, DX-2835-45D-8MM, DX-2835-45D-10MM, DX-2835-60D-5MM, DX-2835-60D-8MM, DX-2835-60D-10MM, DX-2835-60D-12MM, DX-2835-120D-12MM, DX-2835-120D-15MM, DX-3528-30D-5MM, DX-3528-30D-8MM, DX-3528-30D-10MM, DX-3528-45D-5MM, DX-3528-45D-8MM, DX-3528-45D-10MM, DX-3528-60D-5MM, DX-3528-60D-8MM, DX-3528-60D-10MM, DX-3528-60D-12MM, DX-3528-120D-12MM, DX-3528-120D-15MM, DX-5050-30D-8MM, DX-5050-30D-10MM, DX-5050-45D-8MM, DX-5050-45D-10MM, DX-5050-60D-8MM, DX-5050-60D-10MM, DX-5050-60D-12MM, DX-5730-30D-10MM, DX-5730-45D-10MM, DX-5730-60D-12MM, DX-5730-60D-15MM

Rating: 12Vd.c. 3.3A, 40W 1.2 Date of Order

2016-09-21 1.3 Submitted Sample(s): 1 Sample 1.4 Test Duration

2016-09-29 1.5 Country of Origin China

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

2.0 Technical Details

2.1 Investigations Requested

Perform ElectroMagnetic Interference [EMI] tests for RCM. 2.2 Test Standards and Results Summary Tables

Test Standards

AS/NZS CISPR 15: 2011 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EMISSION

Results Summary

Test Condition Test Requirement Test Method Class / Test Result Severity Pass Failed N/A Radiated Emission, 30MHz to 300MHz

AS/NZS CISPR 15: 2011


Table 3b

H-Field Emissions, 9kHz - 30MHz



Table 3a

Remarks: N/A - Not Applicable UT - is the nominal supply voltage

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

3.0 Test Results

3.1 Emission

3.1.1 Radiated Emissions (30MHz to 300MHz)

Test Requirement: AS/NZS CISPR 15 Test Method: AS/NZS CISPR 15 Level: Table 3b Test Date(s): 2016-09-29 Mode of Operation: Lighting mode(input: 12Vd.c.)

Test Method: The test was performed in accordance with AS/NZS CISPR 15 at 3m test distance on a standard emission test site, with quasi-peak measurements performed if the maximized peak measurements were less than 6dB from the corresponding Class B limit lines.

Test Setup:

EUT

3m

Measuring Receiver r

Computer

Turntable

Ground Plane

Semi-Anechoic Chamber

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Limits for Radiated Emission:

Frequency Range Quasi-Peak Limits [MHz] [dBV/m] 30-230 40.0

230-300 47.0 Results of Lighting mode(input: 12Vd.c.): Pass Please refer to the following table for result details

Horizontal

The quasi-peak measurements were recorded as follows:

Frequency MHz

Level @3m dBV/m

Limit @3m dBV/m

Margin dB

E-Field Polarity

30.2 29.3 40.0 10.7 Horizontal 32.4 27.0 40.0 13.0 Horizontal

223.0 24.2 40.0 15.8 Horizontal

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Limits for Radiated Emission:

Frequency Range Quasi-Peak Limits [MHz] [dBV/m] 30-230 40.0

230-300 47.0 Results of Lighting mode(input: 12Vd.c.): Pass Please refer to the following table for result details

Vertical

The quasi-peak measurements were recorded as follows:

Frequency MHz

Level @3m dBV/m

Limit @3m dBV/m

Margin dB

E-Field Polarity

30.1 27.0 40.0 13.0 Vertical 31.0 26.2 40.0 13.8 Vertical 88.3 21.5 40.0 18.5 Vertical

Remark: Calculated measurement uncertainty (30MHz – 1GHz): 4.6dB Emissions in the vertical and horizontal polarizations have been investigated and the worst-case test results are recorded in this report.

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

3.1.2 H-Field Emissions (9kHz – 30MHz)

Test Requirement: AS/NZS CISPR 15 Test Method: AS/NZS CISPR 15 Level: Table 3a Test Date(s): 2016-09-29 Mode of Operation: Lighting mode

Test Method:

The test was performed in accordance with AS/NZS CISPR 15, Clause 9. Test Setup:

Receiver Z Y X

EUT

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Results and limit line for H-Field Emission: (Loop 1 (X))

Limits for H-Field Emission Test, please refer to limit line (Quasi-Peak) in the following diagram. Results of Lighting mode: Pass

Please refer to the following diagram for individual results.

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Results and limit line for H-Field Emission: (Loop 1 (Y))



STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Results and limit line for H-Field Emission: (Loop 1 (Z))



Remark: Calculated measurement uncertainty: 3.3dB

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Appendix A

List of Measurement Equipment

Radiated Emission

EQP NO. DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. LAST CAL

EMD022 EMI Test Receiver ROHDE & SCHWARZ ESCS 30 100314 2016.03.29 EMD061 Biconilog Antenna ETS.LINDGREN 3142C 00060439 2014.11.29 EMD084 MULTI-DVICE CONTROLLER ETS.LINDGREN 2090 00060107 N/A EMD088 Video Contol Unit ETS.LINDGREN Y21953A 2601073 N/A EMD093 Monitor ViewSonic VA9036 Q8X064201876 N/A EMD102 Intelligent Frequency Ainuo lnstrument Co., Ltd AN97005SS 79707454 N/A EMD105 FACT-3 EMC Chamber ETS.LINDGREN FACT-3 3803 N/A EMD-S01 RE Test software ROHDE & SCHWARZ ESxS-K1 V2.10 N/A

Pulsed H-Field Emission

EQP NO. DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. LAST CAL

EMD002 EMI Test Receiver ROHDE & SCHWARZ ESHS 10 8468601002 2016.03.29 EMD016 Magnetic Loop Antenna SHWARZBECK HXYZ9170 N/A 2015.03.24 EMD107 Shielding Room #2 ETS.LINDGREN RFD-100 3804 N/A EMD-S01 H-Field Test software ROHDE & SCHWARZ ESxS-K1 V2.10 N/A

Remark: N/A Not Applicable

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Appendix B

Photograph(s) of Product

Front View of The Product

Rear View of The Product

STC Test Report





Date: 2016-10-11 of 14

No.: DM125281

Photograph(s) of Product

Radiated Emission Test Set Up

H-Field Emissions Test Set Up

***** End of Test Report *****

STC Test Report

Conditions of Issuance of Test Reports

1. All samples and goods are accepted by The Hong Kong Standards & Testing Centre Limited (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The Company provides its services on the basis that such terms and conditions constitute express agreement between the Company and any person, firm or company requesting its services (the “Clients”).

2. Any report issued by the Company as a result of this application for testing service (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to his customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders.

3. The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders.

4. The Report refers only to the sample tested and does not apply to the bulk, unless the sampling has been carried out by the Company and is stated as such in the Report.

5. In the event of the improper use the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate.

6. Sample submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company.

7. The Company will not be liable for or accept responsibility for any loss or damage howsoever arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations.

8. Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing.

9. Subject to the variable length of retention time for test data and report stored hereinto as to otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of this test report for a period of three years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after the retention period. Under no circumstances shall we be liable for damages of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

10. Issuance records of the Report are available on the internet at www.stc-group.org. Further enquiry of validity or verification of the Reports should be addressed to the Company.

STC Test Report - DONGGUAN DAXIAN LIGHT ...STC Test Report For and on behalf of STC (Dongguan)...

Documents

Transcript of STC Test Report - DONGGUAN DAXIAN LIGHT ...STC Test Report For and on behalf of STC (Dongguan)...