STATUS OF EP&M RATE CONTRACT ITEMS AS ON …industries.odisha.gov.in/PDF/epm2008.pdfinternal thread...

STATUS OF EP&M RATE CONTRACT ITEMS AS ON

04.01.2008

Sl. No.

Name of the R/C items

Page No.

Date of original validity

Present period of validity/ extension

1 2 3 4 1. Alpin(Paper Pin) 20.12.2007 20.06.2008(E) 2. ASTM-D PVC Pipes 07.08.2008 3. Ayurvedic Veterinary Medicines 11.03.2008 4. Absorbent Cotton 19.02.2008 5. Black Hexagonal Bolts with nuts 10.10.2008 6. Canvas Boot(Jungle Boot) 28.10.2008 7. Canvas Shoe(P. T. Shoe) 10.12.2008 8. Caps(Peak Cap, Forage Cap) 04.05.2008 9. Cement Water Proofing Compound 17.08.2008 10. C.I.Reflux Valve 11.02.2008 11. Chloroxylenol Solution IP 19.02.2008 12. Collapsible gate 28.01.2009 13. Compact Desk-cum-Bench 16.10.2008 14. Computer Table 30.05.2008 15. Concrete Pipe(RCC Hume Pipe) 21.01.2009 16. Copper Choke 28.10.2008 17. Cotton Tag 22.06.2007 22.06.2008(E) 18. Cresol with soap solution I.P. 19.02.2008 19. ISI Marked Direct Action Hand Pump 24.09.2007 24.03.2008 20. DMS Ankle Boot(Black) 03.06.2008 21. Drugs & Medicines 21.02.2008 22. FRP Door Shutter & Door frame 14.2.2009 23. G. I. Stay Wire 03.01.2009 24. Great Coat 24.07.2008 25. G. I. Barbed Wire 22.12.2007 22.06.2008(E) 26. G.I. Flat 03.03.2007 03.09.2007 27. H. T. Insulator(disc insulator) 29.06.2008 28. H. T. Stay Set 13.03.2009 29. Hospital Bed Stead 11.09.208 30. ISI Marked India Mark-II Deep Well Hand

Pump and G. I. Riser Pipe 32mm 24.09.2007 24.03.2008

31. ISI Marked Rigid UPVC Pipes 07.08.2008

32. Khaki Woollen Beret Cap 10.10.2008 33. L. T. Cross Arm 09.07.2007 09.01.2008 34. L. T. G. I. Pin 17.07.2007 17.01.2008 35. L. T. Stay Set 13.03.2009 36. Lead Acid Storage Battery 19.08.2008 37. LDPE Bag 24.03.2009 38. Leather and Foot Wear Articles 16.08.2007 16.02.2008 39. M. S. Panelled Door and Window 05.09.2007 05.03.2008 40. M. S. Veranda Grill 01.02.2009 41. M. S. Window Grill 01.02.2009 42. Main Switch 30.08.2008 43. Metal Rolling shutter 26.03.2009 44. Metal table 15.11.2007 15.05.2008 45. Mineral Mixture 26.02.2007 26.02.2008 46. M.S./G. I. Pipes, fittings and franges 05.12.2008 47. Nitrile Rubber Pump Bucket and Seat Valve 26.10.2007 26.04.2008 48. Nylon Socks 09.08.2008 49. Office Paste 27.11.2008 50. ORS Powder 19.02.2008 51. Paints 21.10.2008 52. P. S. C. Poles 07.08.2007 07.02.2008 53. Pin Insulator 05.07.2007 05.01.2008 54. Rain Coat 21.11.2008 55. Soft Paraffin IP 25.02.2008 56. Stamp Pad Ink 27.11.2008 57. Steel Chair 17.03.2009 58. Steel Door & Window Frame 14.03.2009 59. Steel Shelving Cabinet 19.11.2007 19.05.2008 60. Steel Truss Angular & Purlins 14.03.2009 61. Steel Window 26.03,2009 62. Submersible Pump 25.12.2006 25.12.2007 63. Surgical Dressing 29.02.2008 64. Tubular Truss & Purlins 03.03.2009 65. Tarpaulins 02.11.2008 66. Type writer ribbon 25.02.2008 67. ‘V’ Type Cross Arm 30.07.2007 30.01.2008 68. Woolen Jerseys Socks & Hostopes 17.08.2008

DIRECTORATE OF EXPORT PROMOTION AND MARKETING, GOVERNMENT OF ORISSA, BHUBANESWAR.

******** LIST OF STORE ITEMS COVERED UNDER RATE CONTRACT

DISCLAIMER

“The list of rate contract items of Directorate of Export Promotion & Marketing is being provided for information purposes only. Information transmitted from this Website cannot be used for establishing legal agreement. DEPM do not accept any responsibility for the accuracy of the information nor for any expenses or damages incurred directly or indirectly resulting from the use. Please check with the DEP&M, Orissa, Ashoka Market Complex, Ashok Nagar, Bhubaneswar-9 for the correct and updated information:”

Sl. No.

Description of the store item

Unit Rate per unit Rs.

Period of validity

Name of the rate contract holding SSI units

1 2 3 4 5 6 ALPIN (Paper Pin Straight) M. S. Pin , Paper Straight Nickel Plated made from 0.80mm 21 gauge dia wire of length 28mm conforming to IS:5653-1988.

Rate per 100 gm net weight in plastic container size 10cm x 6cm x 3.5cm

13.00

20.06.2008

1. M/s. B. K. Products, S.E.-12, Industrial Estate, Cuttack-10 2. M/s. Ravi Industries,

S.E.-10, I.E., CTC-10.

1.

TERMS OF DELIVERY AND TAXES :

1) The rate is ex-factory, inclusive of cost of packing in plastic container and exclusive of value added tax which may be charged extra as admissible if any.

Rate contract Circular No. 306 dt.10.1.08

2. Description of the store item


Period of validity


ASTM-D PVC PIPES

Upto 8” for schedule 40 and 80 only.

As per Statement-A

07.08.2008 (Extension vide circular No.1682 dt.25.02.2008) Subject to validity of EPM registration certificate and VAT clearance certificate.

1. Duro Pipes (P) Ltd., Plot No.51/A, Sector-A, Zone-A, I.E., Mancheswar, Bhubaneswar.

Upto 5” for schedule 40 & 80 only

-do- -do- 2.Konark Pipe & Synthetics (P) Ltd., B-9, I.E., Mancheswar, Bhubaneswar.

Upto 12” -do- -do- 3.Jaiswal Plastic Tubes Ltd., Ganeswarpur I.E., NH-5, P.O. Januganj, Balasore.

½” to 8” N.D. for schedule 40 and 80 only

-do- -do- 4.Lingaraj Pipes (P) Ltd., Plot No.13-A, I.E., Chandaka, Khurda.

1. ½”,to 6” except 3½” in schedule-40

2. ½”,to 5” except 3½” in schedule-80

-do- -do- 5. Swastik PVC Pipe, Sana Kusastali, Bada Kusastali, Ganjam.

Upto 6” for schedule 40 & 80 only and 8” for schedule 80 only

-do- -do- 6.Krishna Plast Pipes (P) Ltd., I.E., Railway Station Road, Bargarh.

1. Upto 2”, 3”, 4” & 5” for schedule 40 and 80 only

-do- -do- 7.Shree Plastics (P) Ltd., Andhapasara Road, Berhampur, Ganjam.

Upto 12”

-do- -do- 8. Oriplast Ltd., O.T. Road, Balasore.

(Included consequent upon the orders dt. 11.9.2003 of the Hon’ble High Court passed in WPC No. 6923/2002, No.5456/ 2003 & No.4653/2003.

1¼”, 1½”, 2”,3”,4”,5”,6”.8” in Schedule-40 and Schedule-80

-do- -do- 9. PGL Supply & services (P) Ltd., Plot No.4A, Chandaka Nuecleus Complex, Sector-B,Patia, Bhubaneswar

½”nd to 8”nd in Schedule-40 & Schedule-80

-do- -do- 10. Hari Udyog(P) Ltd., O.T. Road, Balasore

½”,¾”, 1”, 1¼”, 1½”, 2”,3”,4”,5”,6” & 8” in schedule-40 & 80

11.Jhalani Steel Tubular Poles, S-3/67, Mancheswar, I.E., Bhubaneswar

STATEMENT – A.

Statement of rates of different sizes of UPVC Pipes as per ASTM (D)-1785/89 along with average weight in kg. Per running meter Rate per kg. Rs.66.00Rupees sixty six) only.

Schedule-40 Schedule-80 Schedule-120 Sl. No.

Sizes in inches Quantity in

kg. per running metre

Rate per mtr. (Rs.)

Quantity in kg. per running metre

Rate per mtr. (Rs.)

Quantity in kg. per running metre

Rate per mtr. (Rs.)

1 ½ 0.248 16.36 0.310 20.46 0.344 22.70 2 ¾ 0.330 21.78 0.421 27.78 0.454 29.96 3 1 0.486 32.07 0.617 40.72 0.677 44.68 4 1¼ 0.666 43.95 0.858 56.62 0.946 62.43 5 1½ 0.785 51.81 1.036 68.37 1.150 75.90 6 2 1.059 69.89 1.436 94.77 1.620 106.92 7 2½ 1.658 109.42 2.192 144.67 2.356 155.49 8 3 2.173 143.41 2.934 193.64 3.364 222.02 9 3½ 2.605 171.93 3.578 236.14 3.901 257.46

10 4 3.089 203.87 4.288 283.00 5.418 357.58 11 5 4.184 276.14 5.959 393.29 7.731 510.24 12 6 5.445 359.37 8.185 540.21 10.497 692.80 13 8 8.188 540.40 12.436 820.77 17.349 1145.03 14 10 11.625 767.25 18.425 1216.05 25.533 1685.17

1. The weight per running meter is indicative for conclusion of rate of different classes and sizes of PVC pipes as per ASTM-D-1785/89. However, actual weight may vary subject to provision of relevant specification.

2. The rates are ex-factory, exclusive of excise duty, cess on excise duty, OST, Surcharge on Sales Tax and Entry Tax as admissible, if any.

3. The cost of “O” ring is not included in the rates of contract. 4. All pipes shall be accepted subject to testing by CIPET, Bhubaneswar. 5. The threading and belling charges (per piece) are to be paid extra as shown below.

Sl. No.

Sizes Rate

1 ½” to 1” Rs.5.16 (Rupees five and paise sixteen only) 2 1¼” to 2½” Rs.5.43 (Rupees five and paise forty-three only) 3 3” to 3½” Rs.6.54 (Rupees six and paise fifty-four only) 4. 4” Rs.7.52 (Rupees seven and paise fifty-two only) 5 5” Rs.11.77 (Rupees eleven and paise seventy-seven only) 6 6” Rs.12.51 (Rupees twelve and paise fifty-one only) 7 8” Rs.15.22 (Rupees fifteen and paise twenty-two only) 8 10” Rs.21.28 (Rupees twenty-one and paise twenty-eight only) 9 12” Rs.25.01 (Rupees twenty-five and paise one only) 6. Description:

i) Polyvinyl Chloride (PVC) Plastic Pipe as per ASTM-D-1785/89 length of the pipe laying length will be as specified by the purchaser. Colours off the pipe shall be blue or as per the requirement of the purchaser. The length of the pipe shall be inclusive of threading and belling portion.

ii) Pipe shall be supplied with both ends threaded with external thread and necessary

jointing coupler will be supplied free of cost in each pipe or pipe shall be supplied with one end male thread and other end female thread. The female end grooving

internal thread is to be belled in order to accept the male end while jointing the pipes as per the indentor’s requirement. Jointing of pipe will be done by any of the following system which will be prescribed by the purchaser in the purchase order.

a) The threads will be in accordance with DIN/ACME/BIS Specifications as per the

requirement of the purchaser. b) The threads will be in accordance with the DIN/ACME/BIS Specifications as per the

requirement of the purchaser. Pipes will be provided with a grooving at the root of the male thread to accommodate a flexible rubber ‘O’ ring as per the purchaser/s requirement to make the joint water tight.

i) 2” ND SCHEDULE-4-120 UPVC PIPE. The pipe will conform to ASTM-D-1785/89 having external threads at the one end and internal thread on the other (Belled end). The threading shall conform to DIN-2999 Pt.I except that the nominal length of thread shall be 30mm as specified in DIN 4925, Part-I. The external threaded and shall have a groove of rectangular cross section for accommodation of a Rubber ‘O’ ring placed at nominal distance of 5 from the end of the thread. The root diameter of the groove shall be 6.68 + 0.2 mm and the width shall be 4.1 mm + 0.1mm. The belled end having internal threads shall have an additional bell preceding the thread to accept (and keep compressed) a Rubber ‘O’ ring. The length of the additional bell shall be 15mm ±m2.0mm. The dia of the additional bell shall be 61.5±0.2mm. ii) 5” ND SCHEDULE-40 UPVC PIES: The pipe will conform to ASTM-D-1785/89 having external thread one end and internal thread on the other (belled end). The threading conform to trapezoidal thread 140x6 of DIN-2925, Pt.II, the thread end shall have a groove of rectangular cross section for accommodating a rubber ‘O’ ring placed at the nominal distance of 5mm from the end of the thread. The root diameter of the groove shall be equal to the minor dia of the thread and the width shall be 6.4mm+0.1mm. The belled end having internal thread shall have an additional bell preceding the thread to accept (and keep compressed) a rubber ‘O’ ring the length of the additional bell shall be 18mm±2.0mm. The inner diameter of the additional bell shall be 142.6mm±0.2mm.

iii) Specification 2nd Schedule-80 UPVC well casing pipe conforming to ASTM-D-1785/89 are made with end with parallel external thread (with worth) with a 450 chamber. Each pipe is to be supplied with an injection moulder PVC double socket with parallel thread (with worth) separate by a stop function of the middle and provisional for fitting 4mm smooth ‘O’ ring made of nitrile rubber shore hardness of 65-70 between the end of the thread on each side of the stopper ‘O’ ring will be supplied at extra cost.

7. The specific gravity of the material of the pipe shall be 1.40 to 1.46 /cc.

8. Purchaser requiring any other type of jointing system may intimate the Directorate the details of

the same in order to examine and take steps to incorporate in the Rate contract.

9. The name of the manufacturer along with batch number, class of pipe and sizes of pipe shall be stenciled legibly on each pipe length.


1. Pre-delivery inspection of all supplies shall be made jointly by the technical officers of the Directorate of Export Promotion & Marketing, Orissa, Bhubaneswar and CIPET, Bhubaneswar.

2. The indenting officers are required to intimate the Directorate of EPM to conduct PDI before taking delivery of the materials from factory-site. Their purchase order should also contain the Clause PDI by the Directorate of EPM., Orissa, Bhubaneswar.

3. In case of urgent requirement, the indentor may also conduct their own PDI. 4. Time allowed for delivery of goods: Supplies will be made in respect of pipes of all sizes worth of

Rs.2.00 lakhs per month but not before 20 days from the date of receipt of the supply order. The schedule may however be mutually decided between the purchaser and the rate contract holding SSI unit.

RATE CONTRACT CIRCULAR NO. 3982 dt. 8.8.06, 4525 dt.11.9.06, 6304 dt.1.12.06, 6802 dt.23.1 2.06, 651 dt.22.1.07, 1558 dt.27.2.07, 1855 dt.6.3.07, 2897 dt.2.5.07,6020 dt.4.8.07, 6424 dt.22.8.07,572 dt.21.1.08 & 1682 dt.25.2.2008



Period of validity


3.

AYURVEDIC & VETERINARY MEDICINES a) Stomachic Tonic

Powder (As per Statement-‘A’-I)

b) Antizymotic powder(As

per Statement-‘A’-I) c) Astringent Powder(As

per Statement-‘A’-I) d) Dry Dressing

Powder(As per Statement-‘A’-I)

Note: The detailed compositions of each of the above veterinary medicines is mentioned at Statement-‘A’-I

Per kg.

Per kg

Per kg

Per kg

58.00

61.00

34.00

36.00

11.03.2008

1) M/s. Baal Gopal Agrovet & Chemical Industries (P) Ltd., Plot No.41, New I.E., Jagatpur Cuttack.

2) M/s. Kosmic Laboratories, Shed – 2/63, New I.E., Jagatpur, Cuttack-754021

3) M/s. Usha Ayurvedic Pharmacy, Meria Bazar, Cuttack-753001

4) M/s. Amrit Pharmaceutical & Research Centre, Arabinda Nagar, 2nd Lane, Berhampur-4

5) M/s. Narayan Pharmaceuticals Pvt. Ltd., Plot No.149, Sector-A. Zone-A, I.E., Mancheswar, Bhubaneswar

6) M/s. Kingsy Pharmaceutical Works, D-2/6, Mancheswar I.E., Bhubaneswar-10. (Annual Production capacity 1.80 lakh

packets)(upto 31.12.07)


1) The rates are ex-factory, inclusive of cost of packing exclusive of Orissa entry tax, & Value Added Tax which may be charged extra, as admissible, if any.

2) The packing of the store item shall be in polyethylene bag legibly printed with the name of the medicine batch number, date of manufacturing, net weight and name and address of the manufacturer.

RATE CONTRACT CIRCULAR NO.

1961 dt.12.3.07,2668 dt.20.4.07,3612 dt.4.6.07,3980 dt.20.6.07,5742 dt.23.7.07, 6425 dt.22.8.07, 7169 dt.29.9.07

STATEMENT-‘A’-I Composition of Ayurvedic veterinary medicines as given by the Dean, Faculty of Veterinary Science & Animal Husbandry, Orissa University of Agriculture and Technology, Bhubaneswar vides his letter No.210 OVE dtd. 2.7.87 and Drugs controller, Orissa, Bhubaneswar in Drug Licence No.66-Ayurva, vide Letter No.2738/DC-DOMRAIOR-4/86,dtd.12.3.86.

Sl.No. Name of the Medicine Composition Percentage by weight 1. Stomachie tonic Powder 1. Gentiana Kurro 20% 2.Swertia Chirreta 6% 3. Strychos Nux Vomica 3% 4.Ferrula Foetida 7% 5.Aerous Calamus 4% 6.Zingiber Officinale 6% 7.Cuminum cymium 5% 8.Corroandrum sativum 1% 9.Allium Capa 3% 10.allium sativum 2% 11.Embellia ribes 4% 12.Aggle Marmelus 2% 13.Piper Nigrum 2% 14.Emolica Officinalis 3% 15.Terminalia bellirie 3% 16.Terminalia Chebule 4% 17.Tinospora Cordifelia 4% 18.sodium Biacarbonate 5% 19.Black salt 16% Total 100% 2. Antizymotic Powder 1.Ferula Foetida 10% 2.Strychno Nux vomiea 8% 3.Sinapsis Nigrum 2% 4.Capsicum annum 4% 5.Cur curma Longa 3% 6.Foeniculum Vulgare 4% 7.coziandrum Sativum 4% 8.Zingiber Officinale 4% 9.Cuminum cyminum 6% 10.Piper Nigrum 7% 11.Azadirachita Tndica 4% 12.Acrous Calamus 4% 13.allium sativum 3%

14.Carcum Capticum 6% 15.Piper longum(Piper

longam) 5%

16.Myristia Fragrans 8% 17.Sodium Bicarbonate 18% Total 100% 3. Astringent Powder 1.Holexhena

Antidyxcenteria 10%

2.Accacia Catechu 6% 3.Tinospore Cordifolia 6% 4.Punica Grenatum 4% 5.Phyallenthus

Embelica 6%

6.Ternubakua vekkuruca

6%

7.Terminalia chebule 3% 8.Aegle marmales 6% 9.Coyperus Rotondus 6% 10.Zingiber officinate 6% 11.Kaoline 15% 12.Ferrous Sulphate 10% 13.Creates calcium

carbonate 9%

14.Alum 7% Total 100% 4. Dry Dressing Powder 1.Pulv Bisalyakarani 20% Pulv Neemseed 50% 3.Boric acid 03% 4.Zinc Oxide 03% 5.Calcium Carbonete 10% 6.Magnesium Sulphate 02% 7.Kaolin 05% 8.Neptheline 01% 9.Benzine Hex-chloride 00.5% 10.Sulphur 05.5% Total 100%



Period of validity


ABSORBENT COTTON Absorbent Cotton IP Grade 500 gms. net pack

Rate per 500 gm net pack

41.40

19.02.2008

1. Lakshmi Surgicals (A unit of Lakshmi Health Care Products Pvt. Ltd.), 40-F, Mancheswar Indl. Estate, Bhubaneswar-10

2. Surgiplast (India), Main

Road, Kukudakhandi, Ganjam.

4.

TERMS OF DELIVERY & TAXES : 1. The rate is ex-factory, inclusive of cost of packing and exclusive of value added tax which may be

charged extra as admissible if any. 2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations

charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of one year from the date of issue of rate contract.

3. The delivery schedule may be mutually dicided between the rate contract holder and the indenting officer.

Rate Contract Circular No. 1201 dt.20.02.2007, 1380 dt.23.2.2007



Period of validity


BLACK HEXAGONAL BOLTS WITH NUTS OF 16 MM DIA CONFORMING TO IS NO.1363/67.

5.

Sl. No.

Size in mm

Rate per Kg.

Rs.

1 25 -do- 46.95

2 35 -do- 46.65

3 40 -do- 46.55

4 50 -do- 46.30

5 65 -do- 45.60

6 75 -do- 45.30

7 85 -do- 45.20

8 100 -do- 44.50

9 125 -do- 44.20

10 150 -do- 44.00

11 175 -do- 43.85

12 200 -do- 43.35

13 225 -do- 43.25

14 250 -do- 43.15

15 275 -do- 43.00

16 300 -do- 42.90

As per Statement given below

10.10.2008 for a period of one year from the issue of the R/c circular.

1) M/s. Kirti Industrial Enterprises, 11/9-I.E.,

Cuttack-10. TERMS OF DELIVERY AND TAXES: 1) The rates recommended for conclusion of Rate Contract are ex-factory, exclusive of Orissa entry tax and value added tax which may be charged extra, as admissible, if any. 2) The rate contract holding firm shall furnish manufacturers test certificate along with purchase invoices of M.S. round 16mm dia from OSIC Cuttack/SAIL/RINL while preferring bills at the time of supply of store items. 3) The delivery schedule may be mutually decided between the indentor and the supplier.

RATE CONTRACT CIRCULAR NO.7421 Dt.11.10.07



Period of validity


6.

C.I./SS. PIPES & FITTINGS

Cast Iron fittings for spigot and socket pressure pipe (for lead joint) for water, gas and sewerage conforming to IS No.1538/93 80mm to 300 mm nominal dia meter.

31.68 per kg or 31676.00

per MT

03.01.2007

1. M/s. Utkal Foundry &

Engg. Co. Ltd., At/P.O. Remed, Sambalpur.

TERMS OF DELIVERY AND TAXES : RATE CONTRACT CIRCULAR NO. 7421 dt.11.10.07



Period of validity


CANVAS BOOT (JUNGLE BOOT) Canvas Boot with Rubber Sole (Jungle Boot) as per the sample & design approved by Orissa Police generally conforming to IS No.3736/1995.

Per pair

151.00

28.10.2008

1.Baba Enterprises, H.O.92, Shaktinagar, Link Road,CTC(Annual Production capacity-24,000 pairs) 2.Venus Shoes & Leather Products,Rasulgarh,Bhubaneswar(Annual Production Capacity 150000 pairs) 3.Meher Footwear Industries, Saragiguda,Titilagarh-33,Bolangir(Valid upto 6.6.2008) 4.New Step, Old station Road, Rourkela-1(Valid upto 28.10.2008) 5.Classic shoes, Plot No.2273,tarol,New I.e.,Jagatpur,Cuttack (Valid upto 24.11.2007)

7.

TERMS OF DELIVERY AND TAXES : 1) The rate is ex-factory inclusive of cost of packing, exclusive of VAT and entry tax, which may be

charged extra, as applicable, if any. 2) The delivery schedule may be decided between the R/C holder and the indenting officer. 3) Since the rate is fixed as per DGS&D rate it was decided that the unit will manufacture the

canvas boot conforming to the IS specification as per the DGS&D sample to be supplied by the Orissa Police Hqrs., Cuttack.

RATE CONTRACT CIRCULAR NO. 7690 dt.29.10.2007 Description of the store item


Period of validity


8.

CANVAS SHOES (P.T.SHOES)

10.12.2008

1.M/s. Venus Shoes & Leather Products, Rasulgarh, BBSR.(From

Canvas shoes with rubber sole (P. T. Shoes) generally conforming to IS No.3735/89 and as per the design approved by Orissa Police.

Per pair 81.00

Subject to validity of EP&M Regn. & VAT clearance certificate

11.12.07 to 10.12.08)(Annual Production Capacity -270000 pairs as per DIC PMT Regn. Certificate) 2.M/s. Baba Enterpries, H-92,Shaktinagar, Link Road, Cuttack (11.12.07 to 10.12.08) (Annual Production Capacity -24,000 pairs as per the NSIC Certificate 3.M/s. Meher Foot wear Industries, Sargiuda, Tutukagarh-767033, Dist:Bolangir(Orissa)(Upto 6.6.08) 4. M/s. New Step, Old station road, Rourkela-1 (Upto 10.12.08) 5.M/s. Classic Shoes, Ramesh Colony, Tarola, Plot No.2273, Jagatpur, Cuttack (Upto 10.12.08)(Annual Production Capacity – 25,000 pairs as per the DIC PMT Regn. Certificate)

TERMS OF DELIVERY AND TAXES : 1. The rate is ex-factory, inclusive of cost of packing and exclusive of VAT and Orissa entry tax

which may be charged extra, as admissible, if any. 2. The delivery schedule may be mutually decided between the rate contract holder and the

indenting officer. 3. Purchasing officers are requested to conduct PDI of shoes before lifting the same from the

factory site.

RATE CONTRACT CIRCULAR NO. 8528(200/EPM dt. 11.12.2007 Description of the store item


Period of validity


COMPUTER TABLE 30.05.2008 M/s. Konark Industries, SE-11,I.E.,Cuttack-10

9.

Specification of the Computer Table Computer table made out of M.S.Square tube and ISI marked Pre laminated Board conforming to the design, drawing and specification of DTET, Orissa, Cuttack. Drawing is enclosed. i. Frame & leg – Made out of 25x25x1.25mm M.s.Square tube coforming I.S.-7138 ii.Tap,Key Board,fileshelf UPS shelf,CPU shelf & drawer: Made out of 18mm thick pre laminated board (ISI marked) iii.Key Board – Key Board should be with sliding arrangement for smooth to & fro operation. iv. Fixing of P.L.Board to frames: Shall be fixed with wood screw of size 8 x 38mm. Three nos. of pre laminated board used to provide vertical support to key board and drawer box shall be fixed to top board with the help of angle fabricated from CR sheet 0.8mm with screws. v.side bidding in Prelaminated Board – Plastic/wood.

vi.Stiffener – M.S.squate tube stiffener of size 25x25x1.25mm shall be provided under.(1)Top-1 no.(2)File Shelf-2 nos.(3)UPS & CPU Shelf-2 nos. vii.Joining of members in the frame – By four side continuous welding with good finish. viii.Finish – Painting shall be smooth and uniform and free from burrs and dents and colour as agreed between the purchaser and supplier. 1. 36”WX22”DX30”H (914X559X762mm) with drawer (Detail drawing is enclosed Annexure-‘A’) 2. 32”Wx22”Dx30”H (813x559x762mm) Without drawer(Detail drawing is enclosed vide Annexure’B’)

Per each Per each

Rs.1771.49 Rs.1426.53

Terms of Delivery: 1.The rates are ex-factory inclusive of excise duty and exclusive of value added tax which may be charged extra as admissible if any. 2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and Indenting Officer. Rate Contract Circular No.3499 dt.31.5.2007,466 dt.17.1.08 Description of the store item


Period of validity


10.

CAPS: 1. Peak Cap (for R.I. Inspector, Subedar & Sub-major). Khaki Barathela with dark tan leather head band 4 khaki eyelets at the back portion Chin Strap, Fixed on to 2 Ashoka Lion Cap buttons (Nickel Coated) as per specification provided by Orissa Police Department. 2. Forage Cap (For Sgt. S.I., Jam. ASI & H.M.): Dark blue serge, diameter across top 10”, Sides 3” deep bound black braided ribbon 2” deep rounded Peak 2” deep at the centre to drap at an angle of 45% chin strap 5/8” wide buttoned on to 2 gorget buttons behind the corners of the peak and filled with an adjusting

Per each Per each

140.00

131.00

04.05.2008

1. M/s. Suruchi, Mahatab Road, Kalinga Lane, Cuttack-12.

black patent leather chin strap fixed with 2 Ashoka Lion Cap buttons (Nickel Coated) and removable khaki Terri cotton suiting cover. (As per specifications provided by Orissa Police Department). TERMS OF DELIVERY AND TAXES :

1) The supply of stores should be made strictly in conformity with the specification of Orissa Police with regard to quality, shade, sizes and perfect workmanship.

2) The delivery schedule however may be mutually decided between the rate contract holder and the indenting officer.

3) The above rates are ex-factory inclusive of cost of packing, exclusive of Orissa entry tax and VAT which may be charged extra, if any.

RATE CONTRACT CIRCULAR NO. 2949 dt.5.5.07



Period of validity


CEMENT WATER PROOFING COMPOUND. Integrated Cement Water Proofing Comp-ound (Nominal sett-ing) in liquid form conforming to IS: 2645/75 (maximum chloride content 0.25% and maximum sulphate content-Nil.

Per kg

18.40

17.08.2008

1. M/s. Winco Cement Waterproofing Co. (P) Ltd., At. Uttereswar Temple Street, Gosaninuagaon, Berhampur, Ganjam. (Annual Production Capacity 150 MT)

TERMS OF DELIVERY AND TAXES : • The rates are ex-factory and inclusive of Excise Duty cost of packing and exclusive of VAT

and Orissa entry tax which may be charged extra, as admissible, if any.

• The delivery schedule may be mutually decided between the indenting officer and the supplier.



Period of validity


11. 12.

C.I.REFLUXE VALVE CONFORMING TO IS:NO. 5312(Pt-I)/84 1. Swing check type

Per each

11.02.2008 1.Anupama Industries, Plot No.738, Rasulgarh, Bhubaneswar 2.Tyfore Engineers, 32-A,

flanged refluxe (Non-return)Valve without by pass arrangement for water Works Purpose single door pattern conforming to IS:No. 5312(Pt.I)/84 Nominal size

Nominal pressure

80 mm 1.0 Mpa 100 mm 1.0 Mpa 150mm 1.0 Mpa 200 mm 1.0 Mpa 250 mm 1.0 Mpa 300 mm 1.0 Mpa

2360.00 4900.00 6330.00 8100.00 9540.00 13,400.00

Sec-A, Zone-A, I.E., Mancheswar, Bhubaneswar-10.(Annual production capacity 40 nos. Rs.1.00 lakh)

TERMS OF DELIVERY AND TAXES : • The rates are ex-factory and inclusive of VAT which may be charged extra, as admissible,

if any.


RATE CONTRACT CIRCULAR NO. 978 dt.12.02.2007, 82 dt.3.1.03 Description of the store item


Period of validity


CHLOROXYLENOL SOLUTION B.P.C.

a) 450 ml. in Amber Glass Bottle.

39.00 19.02.2008 1. I.D.D.Pvt. Ltd., Madhupatna, I.E., Cuttack-10. 2.Bharat Salt & Chemical, Industries Ltd., Nayasarak, Cuttack-2 3. Jagannath Chemical & Pharmaceuticals Works Pvt. Ltd., A-29, 30, 31, I.E., Cuttack-10. 4.Bubuna Chemicals, D-2/2,New I.E.,Jagatpur, Cuttack-21 5.Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10

13.


• The rate is ex-factory inclusive of cost of packing and exclusive of VAT which may be charged extra, as admissible, if any.

• The delivery schedule may be mutually decided between the indenting officer and the

supplier.

• The H&FW Deptt., Govt. of Orissa, will pay 1% of rate contract rate towards transporation charges for supply of Drugs & Medicines at different stores/ Medicals of the State for a period of one year from the date of issue of rate contract.



Period of validity


COLLAPSIBLE GATE: Conforming to ISS No.10521/1983 made out of M. S. Channel (19x10x3) mm, M. S. Flat (25x5) mm, (19x5) mm in latties, M.S. Flat (25x12)mm and M.S. Angles (25x25x5) mm in top and bottom rails including clamp-ing and locking arrangement with gap between collapsible channel 4” apart and necessary painting. 3 sets of latties 4 sets of latties

Per kg. Per kg.

37.00 36.60

28.01.2009

1) Agarwala Fabricators,

At/P.O.-Attabira, Baragarh.

2) Kalinga Industries, I.E., Sambalpur.

3) Panigrahi Fabricators & Engineering Workshop, Shantipada, Bolangir.

14.


1) The rates are ex-factory and exclusive of VAT and Orissa entry tax which may be charged extra, as admissible, if any.

2) The minimum time allowed for delivery of goods and delivery schedule may be mutually decided between the rate contract holders and the indenting officer.




Period of validity


15.

COMPACT DESK- CUM-BENCH: (DUAL DESK): The Compact Desk-cum-Bench (Dual Desk) is for the High School, Upper Primary School and Lower Primary School students. The frame shall be made out of square tube of size 25x25x1.25mm thick conforming to IS: 7138.

16.10.2008

As per list given bellow.

The desk top, shelf, bench seat, back rest and book protector shall be made out of pre-laminated medium density fibre board of 18mm thick conforming to IS: 14587/98. The pre-laminated medium density fibre boards shall be fixed by slotted counter shunk head wood screw of size No.8 x 40 mm long conforming to IS: 6760/72 with the square tubes. The square tube frame shall be painted with red-oxide primer and bright colour paints such as yellow, green, olive green and blue. The edges of the pre-laminated boards shall be painted with bright wood paint colours with proper adhesion. The Desk-cum-Bench shall be made as per the drawing and design approved by the School & Mass Education Department, Government of Orissa appended to the prospective offer notices. The Desk-cum-Bench shall be of following sizes. Sizes:

1. 42”x33”x30” (LxWxH)

2. 36”x30”x28”

(LxWxH).

Per each

Per each

2039.00

1699.00

NAME OF THE R/C HOLDERS : 1. Agarwalla Fabricators, At/P.O. Atabira, Bargarh.(Annual Production capacity 400 nos.) 2. Sanjeeb Enterprises, Jagannath Road, Madhupatna, Cuttack.(Annual Production capacity

Rs.30,00,000/-) 3. Orissa Steel & Wire Products Ltd., B-14, I.E., Cuttack-10. 4. Mahalaxmi Steel Industries, Durgabazar, Jagatsinghpur(Annual Production Capacity

Rs.75,000/-) 5. Jagannath Industries, Station Road, Baripada, Mayurbhanj(Annual Production Capacity 2 MT) 6. Kalinga Industries, Baraipalli, Sambalpur. 7. Utkal Metal Products(P)Ltd.,C-3,I.E.,Berhampur,Ganjam 8. Rollex Enterprisers, I.E., Cuttack-10. 9. Xenium & Xenium, Uditnagar Chowk, Rourkela.(Annual Production Capacity 100 MT)

10. Subash Iron & Agricultural Industries, I.E., Kesinga, Kalahandi (Annual Production Capacity 18,000 nos.)

11. Mealonie Colour Chamber, In front of Biswambar Vidyapith, Puri.(Annual Production Capacity 250 nos.)

12. Vijoy Engineering, At/P.O. Raghunathpur, Baripada, Mayurbhanj(Annual Production Capacity 4 MT)

13. Chhatia Panchayat Industries L.E. Co.Op. Society Ltd., At/P.O. Chhatia, Jajpur. 14. Dev Steel Industry, Plot No.4/330, Raghunathpur, P.O. Samantarapur Nuagaon Chhak,

Bhubaneswar (Annual Production Capacity 8 Lakh) 15. Kartik Enterprisers, I.E., Cuttack-10. 16. Delux Steel Industries, Plot No.738, Jail Road, Jharpada, Bhubaneswar. 17. Konark Enterprises, A-40, I.E., Cuttack-10. 18. Orissa Agrico Pvt. Ltd., B-9, I.E., Cuttack-10. 19. Basanti Industries, Netajinagar, I.E., Cuttack-10. 20. Kiran Enterprises, Gopalgaon, Chunabhati, Balasore (Annual Production Capacity 400 nos.) 21. Mohalaya Welding & Fabrication Works,Qr.No.B/139,Koelnagar,Rourkela 22. Narayani Welding Workshop, Gosani Nuagaon, Berhampur. 23. M.M. & Co., I.E., Cuttack-10. 24. Prachi Works Ltd., 35-Sector-A, Zone-B, I.E., Bhubaneswar. 25. Ananda Fabricators & Engineers,Plot No.172,New I.E.,Jagatpur,Cuttack 26. Padma Auto Body Builders, Plot No.144, Zone-C,New I.E., Jagatpur, Cuttack-21 27. A. H. Industries, Nayachouk, Madhupatna, Cuttack 28. Meera Industries, Hemsurpara, Angul. 29. Steel Tex,At-Hotatuta Road, Talcher, Angul 30. Laxmi Metal Industries, At/P.O.-Main Road, Phulbani (Annual Production Capacity 96 Nos.) 31. Maa Autobody Builders,Bidyadharpur,Cuttack 32. Grand Fabricators, Lewis Road, Bhubaneswar. 33. Dibyadutee Chemicals & Engg., Plot No.38, I.E., Jagatpur, Cuttack 34. Rinki Steel Industries, Chandrasekharnagar, Bolangir(Annual Production Capacity 30 MT) 35. Kanika Furniture Pvt. Ltd., N.H.-5, Bampada, Chhanapur, Balasore. (Annual Production

Capacity 60 MT) 36. Unique Enterprises, Netajinagar, Khhanagar, Cuttack.(Annual Production Capacity

Rs.10,00,000/-) 37. Leo Engineers (P) Ltd., 93-B, New I.E., Jagatpur, Cuttack. 38. Sonax Industries, I.E., Kajidiha, Cuttack. 39. Vasavi Steels, Bhapur Bazar, Khaja Street, Berhampur.(Annual Production Capacity 300 nos) 40. Swasti Furniture Inds.,Plot No.72/D,Sec.A,Zone-D(Annual Production Capacity 18 Lakh) 41. Ashutosh Industries, Plot No.271/F, Sector-A, Zone-B, Mancheswar I.E., BBSR.(Annual

Production Capacity Rs.1.3 crore) 42. Shiba Shakti Industries, Gulipatna,Umerkot,Nabarangpur 43. Krishna Industries, Nayachouk,Madhupatna, Cuttack 44. Classic Metal Products, Jagannath Road, I.E.,Cuttack-10(Annual Production Capacity-

Rs.60,00,000/-) 45. Maa Metal Industries, At-Ganesh Bazar, Main Road, Phulabani(Valid upto 18.3.2008) 46. Choudhury Fabrication Works, At/P.O.-Bamra, Sambalpur(valid upto 16.10.2008) 47. Radha Enterprises, At/P.O.-Nayasarak,Cuttack(valid upto 16.10.2008) 48. M.N.Engg.,Plot No.71,fishery lane,Chintamaniswar,Bhubaneswar(valid upto 6.6.2008) 49. Raja Steel Industries,Ranipata,Via-Paralakhemundi,Gajapati(valid upto 16.10.2008) 50. Sri Aurobindo Fabrication,At-Hasinpur,P.O.-Ganiganja,Via-Baripada,Bhadrak(valid upto

16.10.2008) 51. Soor Engg.,Plot No.159,New I.E.,Jagatpur,Cuttack(valid upto 16.10.2008) 52. Sana Iron & Steel Industry, DNK Junction,At/P.O.-Malkangiri(valid upto 16.10.2008) 53. Konark Industries,SE-II, I.E., Cuttack-10(valid upto 16.10.2008) 54. CEF Engineering, Plot No.17,Rasulgarh,Bhubaneswar(Production capacity as per DIC – 30

Lakh)

55. Kalinga Equipments, New Mancheswar,I.E., S-1/110 & 107, BBSR 56. Allied Industries, B-1,I.E.,Cuttack

TERMS OF DELIVERY & TAXES :

2. The rates are ex-factory, exclusive of VAT and entry tax which may be charged extra as admissible, if any.

3. The minimum time allowed for delivery of goods is as follows: a) Orders upto Rs.5,000/- … 30 days. b) Orders from Rs.5,000/- to Rs.10,000/- … 45 days c) Orders for subsequent of Rs.5,000/- … 15 days more.

4. The delivery schedule may be mutually decided between the rate contract holders and the indenting officers.

RATE CONTRACT CIRCULAR NO. 7561 dt.17.10.07, 8821 dt.22.12.07, 181 dt.7.1.08, 189 dt.7.1.08,

539 dt.19.1.08, 1876 dt.4.2.08, 2544 dt.9.4.08 Description of the store item


Period of validity


16.

CONCRETE PIPE (RCC HUME PIPE) CLASS NP2 Pre-cast re-inforced concrete pipes suitable for collar joint class NP2 conforming to IS No.458/2003. Diameter of the pipe in mm 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200

(Unit rate per meter in Rs.)

92.00 117.00 145.00 173.00 229.00 269.00 306.00 365.00 414.00 580.00 760.00 934.00

1184.00 1411.00 1631.00 1887.00

21.01.2009 Subject to validity of EP&M Regn. & VAT clearance certificate.

CLASS - NP2 COLLARS Re-inforced concrete Collar suitable for pipes of class NP2 conforming to IS No.458/2003. 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 CLASS-NP3 Pre-cast reinforced concrete pipes suitable for flush joint Class-NP2 conforming to IS No.458/2003. 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 CLASS-NP4

Pre-cast reinforced concrete pipes suitable for flush joint Class-NP4




21.00 25.00 30.00 34.00 44.00 52.00 59.00 88.00

104.00 128.00 164.00 221.00 261.00 305.00 372.00 452.00

113.00 146.00 205.00 252.00 364.00 582.00 646.00 715.00 816.00

1110.00 1364.00 1774.00 2217.00 2692.00 3128.00 3604.00

conforming to IS No.458/2003. 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200

121.00 161.00 231.00 291.00 414.00 632.00 697.00 771.00 915.00

1355.00 1761.00 2285.00 2752.00 3550.00 4116.00 4766.00

1) M/s. Krishna Cement Products, I.E., Bargarh, Pin-768028. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate) NP2 Pipe –100,150, 250, 300,350, 400, 450, 600, 900, 1000 and 1200. NP2 Collar –100,150, 250, 300,350, 400, 450, 600, 900, 1000 and 1200. NP3 Pipe– 250,300,350, 450, 600, 800, 900, 1000 and 1200. NP4 Pipe – 250, 300, 350, 450, 600, 800, 900, 1000 & 1200.

2) Balaji Spun Pipes & Industries, Dumduma, P.O. Aiginia, Bhubaneswar.

(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipe –100,150, 200,250, 300, 350, 400,450,500 & 600. NP3 Pipe – 600 NP4 Pipe – 600

3) D. P. Industries, Bidubazar, Via. Bahanaga, Dist. Balasore-756042.


NP2 Pipes –100,150,200,250,300,350,400,450,500,600, 800, 900 and 1200. NP2 Collar- 100,150,200,250,300,350,400,450,500,600, 800, 900 and 1200. NP3 Pipes – 300, 400, 600, 900, 1000, 1200mm.

4) Trinath Concrete Works, Kothapeta, Rayagada.


NP2Pipes–100,150,200,250,300,350,400,500,600,700,800,900,1000 & 1200. NP2 Collars–100,150,200,250,300,350,400,500,600,700,800,900,1000 & 1200. NP3 Pipes – 350,400,450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.

5) East India Concrete Products, At/P.O. Rairangpur, Dist. Mayurbhanj.


NP2 Pipes- 100,150,250,300,350,450,500,600,700,800,900,1000 & 1200. NP2 Collars-100,150, 200,300,350,400,500,600,700,800 and 900. NP3 Pipes- 300,350,450, 600, 800, 900, 1000 and 1200.

NP4 Pipes- 300,350,450, 600, 800, 900, 1000 and 1200.

6) Jyoti Concrete Products, At. Bebarta Kateni, P.O. Korian, Dhenkanal. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000 & 1200 NP2 Collars – 100,150,200,250,300,350,400,450,500,600,700,800,900,1000,1100 & 1200 NP3 Pipes – 100,150,200,250,300,350,400,450,500,600,700,800,900,1000, 1100 & 1200 NP4 Pipes -100,150,200,250,300,350,400,450,500,600,700,800,900,1000, 1100 & 1200

7) Neelachal Concrete Products (P) Ltd., At. Bampada, P.O. Chhanpur, Dist. Balasore-756056


NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000 & 1200 NP2 Collars –100,150,200,250,300,350,400,450,500,600,700, 800 & 900. NP3 Pipe –300,350,400,450, 600,700,800,900,1000 & 1200 NP4 Pipes - 300,350,400,450, 600,700,800,900,1000 & 1200

8) Geetanjali Cement Products, At. Gotidhara, P.O. Balanda, Sundargarh.


NP2 Pipes – 300, 450,600, 700, 800, 900, 1000 & 1200 NP3 Pipes – 300, 350, 400, 450, 600, 700, 800, 900, 1000 & 1200.

9) Orissa Cement Art Works, At/P.O. Jhankarpalli, Sambalpur.


NP2 Pipes – 100,150,250,300, 400,450,500,600,700,800,900,1000, 1100 & 1200 NP3 Pipes -350,400,450,500,600,700,800,900,1000, 1100 & 1200 NP4 Pipes -350,400,450,500, 600,700,800,900,1000,1100 & 1200

10) Hirakhand Pipes, At. Jagannath Road, P.O. Sohela, Bargarh-768028 (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes – 100, 150,200, 300,450, 600, 800, 900, 1000 & 1200. NP2 Collars – 100, 150,200,300, 450, 600, 800, 900, 1000 & 1200. NP3 Pipes- 350, 450, 600,800,900, 1000 &1200.

11) Khandagiri Cement Works, P.O. Aiginia, Khandagiri, Bhubaneswar.


NP2 Pipes – 100,150,200,250,300, 450, 500, 600, 700, 800, 900, 1000,1100 &1200. NP3 Pipes – 350, 450, 600, 700, 800, 900, 1000 & 1200. NP4 Pipes – 350, 450, 600, 700, 800, 900, 1000 & 1200.

12) Utkal Cement Products, At/P.O. Tamando, Khurda.


NP2 Pipes – 100,150,200,250,300,350,400,450,500,600,700,800,900 &1000. NP2 Collars – 300, 600 & 900. NP3 Pipes – 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200. NP4 Pipes - 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200.

13) Keonjhar Hume Pipe Industries, At/P.O. Ghutur, Near AIR Station, Keonjhar-751001.


NP2 Pipes – 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700,800, 900, 1000, 1100

and 1200mm dia. NP2 Collars – 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200. NP3 Pipes – 350,400,450,500, 600, 700, 800, 900, 1000, 1100 & 1200. NP4 Pipes - 450,500, 600, 700, 800, 900, 1000, 1100 & 1200.

14) National Cement Products, At/P.O. Dhurupada, Dist. Keonjhar-758001. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200,250,300,350,400,450,500,600,700,800,900,1000, 1000 & 1200

NP2 Collars – 100,150,200,250,300, 450,500,600,700,800,900,1000 & 1200 NP3 Pipes –350,400,450,500,600,700,800,900,1000, 1100 & 1200 NP4 Pipes -350,400,450,500,600,700,800,900,1000, 1100 & 1200

15) Jai Jagadamba Spun Pipe, At/P.O. Jhankarpalli, Sambalpur. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes – 100, 150, 200, 250,300, 350,400, 450,500, 600, 700, 800, 900, 1000 and 1200. NP2 Collars – 100, 150, 200, 250,300, 350,400, 450,500, 600, 700, 800, 900, 1000 and 1200. NP3 Pipes – 150, 200, 350, 400, 450, 500, 600, 700, 800, 900, 1000 and 1200. NP4 Pipe - 150, 200, 350, 400, 450, 500, 600, 700, 800, 900, 1000 and 1200. (Valid upto 4.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)

16) Laxmi Cement Products, At. Badadohar, P.O. Khariar, Dist. Nuapada. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes – 600 NP3 Pipes – 350, 450, 600, 900, 1000 and 1200. (Valid upto 16.08.2006 subject to validity of EPM Registration & VAT clearance Certificate)

17) Maruti Cement Products, At. Eheraguda, P.O.-Pitamahal, Dist: Rayagada-765002.


NP2 Pipes –100,150,200,250,300,350,400,450,500, 600,700,900,1000, 1100 & 1200 NP2 Collars –100,150,200,250,300,350,400,450,500, 600,700, 900,1000, 1100 & 1200 NP3 Pipes- 300,350,400,450,500, 600,700,800,900,1000, 1100 and 1200 (Valid upto 21.01.2009 subject to validity of EPM Registration & VAT clearance Certificate)

18) Maa Santoshi Concrete Products, At. Subarnapur, P.O. Malatigunderpur, Dist. Sambalpur. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200,250,300, 450, 600, 900 & 1200

NP3 Pipes- 300,350, 450, 600, 900,1000 and 1200 (Valid upto 23.08.2006 subject to validity of EPM Registration & VAT clearance Certificate)

19) Navajyoti Spunpipe Industry, At. Ralaba, P.O. Rangipur, Via. Berhampur, Ganjam. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes -100,150,200,250,300,350,400,450,500,600,700,800,900,1000,1100 and 1200. NP3 Pipes – 100,150,200,250,300,350, 400, 450, 500, 600, 700, 800, 900, 1000, and 1200. (Valid upto 04.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)

20) Kunal Spun Pipe, Mundher, N.H.-42, Sambalpur. (Valid upto 07.05.2008 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipe –100,150, 200, 250, 300,350, 400, 450,500, 600, 700, 800, 900, 1000 and 1200. NP2 Collar –100,150,200, 250, 300,350, 400, 450,500, 600, 700, 800, 900, 1000 and 1200. NP3 Pipe– 100, 200, 300,350,400, 450, 500, 600, 700,800, 900, 1000 and 1200. NP4 Pipe – 100, 200, 300, 350, 400, 450, 500,600,700, 800, 900, 1000 & 1200. (Valid upto 04.12.2006 subject to validity of EPM Registration & VAT clearance Certificate)

21) Sri Laxmi Concrete Works, At. Viranarayanpur Road, P.O. Kothapeta, Rayagada.(Annual Production Capacity-3000 nos.)


NP2 Pipes – 100,150,200,250,300,400,500,600,700,800,900,1000, 1200. NP2 -Collars 300,400,500,600,700,800,900,1000 and 1200 NP3 Pipes – 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.

22) Panda Hume Pipes, At. Aruapalli, P.O.Gaunju, Berhampur,Ganjam-761002 (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP3 Pipes- 350, 450, 600, 800, 900, 1000 and 1200

23) Chandrama Cement Products, Jolko, At/P.O. Utkela, Dist. Kalahandi. (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200, 400,450,500,600,700,800,900,1000 & 1200 NP2 Collars –150,200, 300, 400,450,500,600,700,800,900,1000 & 1200 NP3 Pipes – 350,400,450, 600,700,800,900,1000, 1100 & 1200

24) Amulya Cement Products, Nuakote, Maidalpur,Nabarangpur

(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate) NP2 Pipes-100,150,250, 300,450, 600, 900, 1000 & 1200.

NP3 Pipes – 450, 600, 900, 1000 and 1200 NP4 Pipes – 350, 450, 600, 900 and 1200. 25) Bishnu Enterprisers, 30, Pani Market Complex, Uditnagar, Rourkela-769012,

Dist:Sundergarh (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200 NP3 Pipes – 100,150,200,250,300,350,400,450, 500,600,700,800,900,1000, 1100 & 1200

26) Kalinga Concrete Products(P) Ltd., Lanjipalli Road, Berhampur, Dist: Ganjam (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,250,300,450,500,600,800,900,1000,& 1200 NP3 Pipes – 350,450, 600,800, 900,1000& 1200

27) Bhubaneswar Spun & Cement Works, At-Kusum Khunti, P.O.-Dangriduda, Dist: Kahalandi

(Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate) NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200 NP2 Collars –150,200, 250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200 NP3 Pipes – 100,150,200,250,300,350,400,450, 500,600,700,800,900,1000, 1100 & 1200

28) Konark Spun Pipes & Co., Kundraguda, P.O.-Anchala, Via-Borigumma-764056,

Dist:Koraput (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes –100,150,200,250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200 NP2 Collars –100,150,200, 250,300,350, 400,450,500,600,700,800,900,1000,1100 & 1200 NP3 Pipes – 350,400,450, 500,600,700,800,900,1000, 1100 & 1200

29) Arati Cement Products, At: Onelliamal. P.O.-Karlapada, Dist:Kalahandi (Valid upto 25.09.2008 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes-300,450, 600, 900, 1000 & 1200. NP3 Pipes – 350,450, 600, 800, 900, 1000 and 1200

NP4 Pipes – 350, 450, 600,800, 900,1000 and 1200. 30) Thakur Cement Products, At-Dhurkuti, P.O.-Santapur, Dist:Kalahandi

(Valid upto 13.11.2008 subject to validity of EP&M & VAT clearance certificate) NP2 Pipes-300,350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 & 1200.

NP3 Pipes – 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200 NP4 Pipes 600, 700, 800, 900, 1000, 1100 and 1200.

NP2 Collars –300,350, 400,450,500,600,700,800,900,1000,1100 & 1200

31) Wesix Hume Pipe Industries Pvt. Ltd., Baripada-757001, Mayurbhanj (Valid upto 21.01.2009 subject to validity of EP&M & VAT clearance certificate)

NP2 Pipes-100,150, 250, 300, 350, 400, 450, 600, 800, 900, 1000& 1200. NP3 Pipes – 300, 350, 450, 600, 800, 900, 1000and 1200

NP4 Pipes 600, 700, 800, 900, 1000, 1100 and 1200. NP2 Collars –300, 350, 450, 600, 800, 900, 1000 & 1200

32) Maruti Cement Product, At/P.O.-Khariar, Dist: Nuapada (Valid upto 21.01.2009 subject to

validity of EP&M & VAT clearance certificate) NP2 Pipes-100,150, 200, 250, 300,350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 &

1200. NP3 Pipes – 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200 NP2 Collars –100, 150, 200, 250, 300,350, 400,450,500,600,700,800,900,1000,1100 &

1200 33) Jaya Durga Spun Pipes, At/P.O.-Madhapur, Dist: Boudh (Valid upto 21.01.2009 subject to

validity of EP&M & VAT clearance certificate) NP2 Pipes-100, 150, 200, 250, 300, 400, 450, 600, 700, 800, 900, 1000, 1100 & 1200.

NP3 Pipes –350, 450, 500, 600, 700, 800, 900, 1000, 1100 and 1200 NP2 Collars –100, 150, 200, 250, 300, 400,450,600,700,800,900,1000,1100 & 1200

NAME OF R/C HOLDERS : 2. Krishna Cement Products, I.E., Bargarh, Pin-768028.(Annual Production Capacity-12,000 nos.

as per the DIC PMT Regn. Certificate) 3. Balaji Spun Pipes & Industries, Dumduma, P.O. Aiginia, Bhubaneswar. .(Annual Production

Capacity-Rs.7,68,000/- as per the DIC PMT Regn. Certificate) 4. D. P. Industries, Bidubazar, Via. Bahanaga, Dist. Balasore-756042. .(Annual Production

Capacity-6600 mtrs. as per the DIC PMT Regn. Certificate) 5. Trinath Concrete Works, Kothapeta, Rayagada. .(Annual Production Capacity-15000 mtrs, 9000

nos. as per the DIC PMT Regn. Certificate) 6. East India Concrete Products, At/P.O. Rairangpur, Dist. Mayurbhanj. .(Annual Production

Capacity-11400 mtrs. as per the DIC PMT Regn. Certificate) 7. Neelachal Concrete Products (P) Ltd., At. Bampada, P.O. Chhanpur, Dist. Balasore-

756056.(Annual Production Capacity-9000 sfts. as per the DIC PMT Regn. Certificate) 8. Geetanjali Cement Products, At. Gotidhara, P.O. Balanda, Sundargarh. .(Annual Production

Capacity-5,000 nos. as per the DIC PMT Regn. Certificate) 9. Orissa Cement Art Works, At/P.O. Jhankarpalli, Sambalpur. .(Annual Production Capacity-6000

nos. as per the DIC PMT Regn. Certificate) 10. Hirakhand Pipes, At. Jagannath Road, P.O. Sohela, Bargarh-768028.(Annual Production

Capacity-20,000 mtrs. as per the DIC PMT Regn. Certificate) 11. Khandagiri Cement Works, P.O. Aiginia, Khandagiri, Bhubaneswar. .(Annual Production

Capacity-Rs.40,65,000/- as per the DIC PMT Regn. Certificate) 12. Utkal Cement Products, At/P.O. Tamando, Khurda. .(Annual Production Capacity-9450

mtrs. as per the DIC PMT Regn. Certificate) 13. Keonjhar Hume Pipe Industries, At/P.O. Ghutur, Near AIR Station, Keonjhar-751001.

.(Annual Production Capacity-8700 nos. as per the DIC PMT Regn. Certificate) 14. Konark Spun Pipe & Co., Kundraguda, P.O. Anchala, Near Boriguma, Koraput – 764056.

.(Annual Production Capacity-24940 pairs as per the DIC PMT Regn. Certificate) 15. Bishnu Enterprises, Plot No.17, I.A., Kalunga, Sundargarh. .(Annual Production Capacity-

37,500 metres as per the DIC PMT Regn. Certificate)

16. Kalinga Concrete Products (P) Ltd., Lanjipalli Road, Berhampur. .(Annual Production Capacity-1100 M.T. as per the DIC PMT Regn. Certificate)

17. National Cements Products, At/P.O. Dhurupada, Dist. Keonjhar. .(Annual Production

Capacity-Rs.24,00 lakh as per the DIC PMT Regn. Certificate)

18. Jai Jagadamba Spun Pipe, At/P.O. Jhankarpalli, Sambalpur. .(Annual Production Capacity-12,000 MT as per the DIC PMT Regn. Certificate)

19. Laxmi Cement Products, At. Badadohar, P.O. Khariar, Dist. Nuapada. .(Annual Production

Capacity-15000 mtrs as per the DIC PMT Regn. Certificate) 20. Maa Santoshi Concrete Products, At. Subarnapur, P.O. Malatigunderpur, Dist. Sambalpur.

.(Annual Production Capacity-12,000 nos. as per the DIC PMT Regn. Certificate) 21. Navajyoti Spunpipe Industry, At. Ralaba, P.O. Rangipur, Via. Berhampur, Ganjam. (Annual

Production Capacity-6400 nos. as per the DIC PMT Regn. Certificate)

22. Kunal Spun Pipe, Mundher, N.H.-42, Sambalpur. .(Annual Production Capacity-750 MTas per the DIC PMT Regn. Certificate)

23. Maruti Cement Products, At.Beheraguda, P.O. Pitamahal, Rayagada. .(Annual Production Capacity-6000 sets. as per the DIC PMT Regn. Certificate)

24. Sri Laxmi Concrete Works, At. Viranarayanpur Road, P.O. Kothapeta, Rayagada. .(Annual

Production Capacity-3,000 nos. as per the DIC PMT Regn. Certificate) 25. Panda Hume Pipes, At. Aruapalli, P.O.Gaunju, Berhampur, Ganjam-761002. (Annual

Production Capacity-2,000 nos. as per the DIC PMT Regn. Certificate) 26. Bhubaneswar Spun Pipes Cement Works, Kusumkhunti, Dangriguda, Dist. Kalahandi.

.(Annual Production Capacity-89587 mtrs. as per the DIC PMT Regn. Certificate) 27. Chandrama Cement Products, Jolko, At/P.O. Utkela, Dist. Kalahandi. .(Annual Production

Capacity-Rs.10,00,000/- as per the DIC PMT Regn. Certificate) 28. Amulya Cement Products, Nuakote, Maidalpur, Nabarangpur.(Annual Production Capacity-

6000 nos. as per the DIC PMT Regn. Certificate) 29. Jyoti Concrete Products, At. Bebarta Kateni, P.O. Korian, Dhenkanal. 30. Arati Cement Products, At: Onelliamal, P.O.: Karlapada, Dist: Kalahandi. (Annual

Production Capacity-3600 nos. as per the DIC PMT Regn. Certificate) 31. Thakur Cement Products, At-Dhurkuti, P.O.Santapur, Dist: Kalahandi.(Annual Production

Capacity-7200 MTR. as per the DIC PMT Regn. Certificate) 32. Wesix Hume Pipe Industries Pvt. Ltd., Baripada-757001, Mayurbhanj

33. Maruti Cement Product, At/P.O.-Khariar, Dist: Nuapada 34. Jaya Durga Spun Pipes, At/P.O.-Madhapur, Dist: Boudh. (Annual Production Capacity- Rs.

20, 00,000- & Rs.45, 00,000/-as per the DIC PMT Regn. Certificate) 35.


1) The above rates are ex-factory and exclusive of Orissa entry tax and value added tax which may be charged extra as admissible, if any.

2) Breakage of 4% or as the case may be, in case of actual testing of pre-cast reinforced concrete

pipes may be borne by the indenting authority. 3) The delivery period may be mutually decided between the rate contract holding SSI units and the

indenting officer.



Period of validity


COPPER CHOKE Ballast (Choke Coil) copper wire wound for use in 240 Volts, 50Hz A.C. supply for fluorescent tubular lamps of the 40W and 20W rated wattage and conforming to IS:1534 (Pt.I)/77 with Amendment No.1. The ballast shall be so designed and constructed that in normal use their performance is reliable and without danger to the user or surrounding. They shall be mechanically robust and shall be so designed and constructed as to with stand the change of temperature and moisture in the surrounding. All exposed metal points shall either be constructed of non-errus material or adequately protected against corrosion. Adequate robust means of fixing shall be provided to ensure satisfactory mechanical and thermal contact with the surface in which they are mounted.

Per each

100.00

28.10.2008 from the date of issue of the circular (Subject to validity of EP&M Regn. Certificate)

1. Standard Point

Electronics, At. Gobardhanpur, P.O. Gada Damodar Palli, Via. Dharakot, Dist. Ganjam.

(Annual production capacity as mentioned in the DIC PMT Certificate is Rs.2,00,000/- 2. Blue Circle Instruments, Shed No.32, I.E.,Rasulgarh, Bhubaneswar (Annual Production Capacity – 6000 nos. Rs.13.20 lakhs)

17.

TERMS 0F DELIVERY AND TAXES :

1. The rate is ex-factory inclusive of cost of packing, exclusive of VAT may be charged extra, as admissible, if any. 2. The delivery schedule may be mutually decided between the contractor and the indenting officer.

RATE CONTRACT CIRCULAR NO. 7680 Dt.29.10.2007,253 dt.8.1.08



Period of validity


COTTON TAG The cotton yarn shall be three fold yarn, white colour lace shall be without cores and minimum 32 twists per decimeter. Both ends of the lace shall be provided with tags of metallic sheet of not less than 25mm length with tapering ends. The metallic portions must be free from rust, cracks and other surface defects. The metallic portion of the tags shall be plated chromium over nickel; length of the lace portion shall be 175mm. The lace portion of the tag (excluding metal) shall weight minimum 0.80 g. for 100 cm. length. The tag shall conform to the requirement of IS: 8499/88. The lace shall be round and uniformly twisted and pieces shall not come out in normal use.

Per bundle i.e. 100 nos. of tags shall be tied toget-her with elast-ic cord at both the ends in the form of bund-le.

7.70

22.06.2008 (Extension vide circular No.113 dt.4.1.08)

1. B. K. Products, S.E.-

12, I.E., Cuttack-10.

TERMS OLF DELIVERY & TAXES :

1. The rate is ex-factory, exclusive of excise duty, Orissa entry tax and value added tax (VAT) which may be charged extra as legally leviable, if any.

2. The delivery schedule may be mutually decided between the contractor and the indenting officer. RATE CONTRACT CIRCULAR NO. 3175 dt.23.06.2006 Description of the store item


Period of validity


CRESOL WITH SOAP SOLUTION IP Cresol with Soap Solution IP

450 ml.

in Amber Glass Bottle

44.26

19.02.2008

1) I.D.D. (P) Ltd., I. E., Madhupatna, Cuttack-10

2) Surgiplast India, Main Road, Kukudakhandi, Ganjam.

19.


1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be charged extra as admissible if any.

2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of one year from the date of issue of rate contract.

3.The delivery schedule may be mutually dicided between the rate contract holder and the indenting officer.



Period of validity


DIRECT ACTION HAND PUMP CONFORMING TO IS:14106/96. ISI Marked Direct action hand pump consisting of 1) Cylinder Assembly, 2) Pump Head Assembly, 3) Retrieving Rod Assembly, Rising Main & Combinations Spanner suitable for tube-well assembly consisting of upper casing, lower casing and well screen assembly conforming to IS Specification No.14106/96 with subsequent amend-ment, if any, for the depth of 40 metres.

Rate per set

7,012.00

24.3.2008 For a period of one year from 25.09.2006 to 24.09.2007 (subject to validity of EPM Regn. certificate, VAT clearance certificate and BIS licence)

1) Oriplast Ltd., O.T. Road, Balasore.

Marking The pump head cylinder and other components of the pump shall be marked as under 1) The pump head shall have a name plate with the name of the

manufacturer and serial number of pump. 2) The head flange, intermediate flange and the stand flange shall

have steel punch impression of manufacturers identification mark, deep enough to be visible after galvanizing.

3) All unplasticised PVC pipes including cylinder pipe shall be clearly and indelibly marked (Preferably screen printed) with the following:-

a) Manufacturer’s identification mark. b) Name of the component c) Batch No. which can be co-related with production /internal

quality records. Packing: All the materials are to be duly packed as per I.S. No.14106/96 and subsequent amendment if any to withstand road transit at the suppliers cost and risk.

20.


• The rate is ex-factory inclusive of excise duty, packing charges but exclusive of inspection charges, VAT and entry tax which may be charged extra, as applicable, if any. The indenting authority should ensure valid BIS licence of the store item at the time of purchase.

• Inspection of the store item will be conducted by B.I.S. Inspection of CIPET may be made at the instance of indenting officers, if necessary.

• Minimum time to be allowed for delivery of goods will be mutually decided by the indenting officer and the contractor.

RATE CONTRACT CIRCULAR NO. 4844 dt. 25.09.2006, 6811 dt.23.12.06, 2108 dt.19.3.07, 7463 dt.15.10.07 Description of the store item


Period of validity


21.

D.M.S. ANKLE BOOT: (BLACK) Type-I conforming to IS No.11226/93 (As per detail specification furnished by Orissa Police attached at Annexure ‘A” from Page 4 to 9)

Per Pair.Ex-factory inclusive of cost of packing

336.00

3.6.2008

1. Venus Shoes & Leather Products, At/P.O. Rasulgarh, Bhubaneswar-10.

2. New Steps, Old

Station Road, Rourkela-1

3. Meher Footwear

Industries, Sergiguda, Titilagarh, Bolangir.

4. Baba Enterprises, Plot No.92, Shaktinagar, Link Road, Cuttack-753012

ANNEXURE-A.

SPECIFICATION TAKEN FROM IS: 11226/93 FOR DMS ANKLE BOOT (BLACK) TYPE-I

1. Scope:- This specification covers the requirements of Orissa Police and the requirements of

material quality and their sizes to be used in different components and manufacture, in line with the similar products prescribed by Bureau Indian Standards.

Table 1 Shape, Design & Pattern

The DMS Ankle Boot Type-I shall be made out of Black/jug grain Chrome upper leather unlined but plain toe cap and counter, without steel toe cup, loose below tongue and two nos. of metal rivets fitted at the corners of quarters to secure it firmly to the vamp, cotton lace and jug loop at the back strap, sole should be rubber sole, direct moulded as per IS: 11226/1993. The foot-wear shall be made by vulcanizing or direct moulding process. The moulded rubber sole and heel in the finished boots shall

have an anti-slip design as per fig.2 of IS: 11226/93. It shall be free from visible defects, such as blowholes, cuts, cracks, cavities, flash and spew. The boot shall be provided with full socks. The boot shall be Ankle high with extra reinforcement in the quarter where the eyelets fitted and made riveted and stitched. Size: As per the requirements of Purchaser. Materials: The DMS Ankle boot (Black) shall be manufactured with the following materials.

a. Upper Leather: Full Chrome leather black printed conforming to IS: 5677/1986.

b. Toe cap and counter: Full chrome black plain leather confirming to IS: 5677/1986.

c. Toe puff and stiffener: Toe puff and stiffener material shall be vegetable tanned

sole leather splits conforming to type-I of IS: 7554/1974.

d. Insole material: Leather board conforming to IS: 5867/1970 shall be used.

e. Shocks: Pigments splits leather.

f. Bottom Materials : Rubber sole and heel shall confirm to IS: 11226/93, Table-I Thread : Upper closing – Rot proof cotton sewing threads variety No.35 is conforming to IS: 1720/1978.

OR Nylon thread of 5 ply may be used subject to agreement between the manufacturer and purchaser. Laces: Fabric laces or Nylon laces – colour matching with colour of upper leather shall be provided. The length shall be 90 ± 5 cm conforming to IS:4778/1982. Tape – Cotton tape size – 19 ±1 mm, width variety No.8 of 1895/1982. Grinderies :

a) Eyelets: Aluminium or steel eyelets, conforming to IS: 5041/1978 shall be used. b) Lasting tack: Mild steel rust proof tacks, size 12 mm ± 1mm and 10mm ± 1mm. c) Shank: Iron shanks conforming to Type-I of IS: 10945/1984 shall be used. d) Bifurcated rivets: Bifurcated rivet size 8 mm (5/16”) to be fitted at the corner of quarter to secure

it firmly to the vamp. e) Toe compound: Gum glue or latex based hard setting cement compound shall be used.

A) Thickness of leather components Thickness Minimum i) Vamp 1.5mm ii)Quarters 1.5 mm iii)Toe cap & outside counter and jugloop 1.2mm iv)Tongue 1.0mm v)Full socks 0.8mm vi)Insole 2.5mm vii)Toe puff & Stiffener 2.0 mm B) Direct moulded rubber sole (finished):

Component Material Thickness mm i) At fore part Rubber 14.0 ±1 ii)At Waist -do- 9.0 ± 1 iii)Heel (finished) -do- 35.0 ± 1 iv)Heel filler Pulp or fibre board 10.00 or light wood MANUFACTURE: DMS Ankle Boot. Upper stitching: The number of stitches shall be 20-25 per decimeter and in two rows, about 3 mm apart, on the toe caps and counter and two rows about 5 mm apart on sides. The distance between the two rows of stitching at the quarter facing shall not exceed 2mm. The first row of stitching – shall be approx. 3mm from the edge of the quarter facing. All loose ends of threads shall be properly secured. The back seams of the quarters shall be reinforced with a NEWAR. The joined top of the quarter shall be strengthened by means of 25±1 mm wide Leather strap at the back. The counter shall be turned over within 15mm at the top of the leg so as to form a Jugloop, six eyelets shall be fitted equidistantly in each face, each eyelets being properly clenched without any distortion. Height of Leg: 150±2mm for size-8, shall increase or decrease by 2mm from size to size. Marking: Size and supplier’s name/trade mark shall be incorporated in the mould so as to make them legible on the waist of out sole.

IS:11226/1993

Indian Standard

LEATHER SAFETY FOOTWEAR HAVING DIRECT MOULDED RUBBER SOLE SPECIFICATION (FIRST REVISION)

1. SCOPE: This standard prescribes the requirements, methods of sampling and tests for leather

safety footwear having steel toe caps and direct moulded rubber soles. 2. REFERENCES: The Indian Standards listed in Annex-A are necessary adjuncts to this standard.

3. TERMINOLOGY: For the purpose of this standard, the definition given in IS:2050 : 1991 shall

apply.

4. TYPES: The leather safety footwear having direct moulded rubber soles, shall be of following three types depending on their design.

Type 1 Ankle boots Type 2 Jodhpuri Shoes Type 3 Derby Shoes However such footwear with modified design may also be made as agreed to the purchaser and the manufacturer. 5. REQUIREMENTS: Leather safety footwear namely, Ankle boot, Derby Shoe pattern or Jodhpuri Shoe pattern

or similar designs other than these, as agreed to between the manufacturer and the purchaser, shall be made from chrome tanned upper leather with cleated soles and heals with slip-resistant pattern by direct vulcanizing or by direct moulding process.

Materials. 5.2.1 Upper Leather: For upper, full chrome leather conforming to IS: 5677 : 1986 shall be

used. Unless otherwise specified, the leather shall be black or brown and printed with pebble

grain or any print agreed to between the purchaser and the manufacturer. 5.2.2 Insole Material: Leather board conforming to IS:5867/1970 shall be used, Chrome fibre

board (reconstituted) may also be used if agreed to between the purchaser and the manufacturer.

5.2.3 Stiffener: Stiffener material shall be vegetable tanned sole leather splits conforming to Type 1 of IS: 7554/1974.

5.2.4 Lining Material: Lining leather conforming to Type-1 or Type 3 of IS : 3840/1979 shall be used.

NOTE–While checking the conformity of upper leather, stiffener material and lining leathers to be

relevant standards mentioned under 5.2.1, 5.2.3 and 5.2.4 respectively, the sampling shall be done in accordance with IS : 5868/1983.

5.2.5 Threads: Rot-proof cotton sewing threads variety No.35 conforming to IS : 1720/1978 and rot-proof linen thread complying with the requirements given in Annex B shall be used for stitching of upper. The colour of thread used shall be as agreed to between the purchaser and the manufacturer.

5.2.6 Grinderies 5.2.6.1 Lasting tacks : Mild steel, rust proof, 12.0 ± 1 mm and 10.0 ± 1 mm long lasting tacks shall

be used. 5.2.6.2 Shanks : Iron shanks conforming to Type-1 of IS : 10945 : 1984 shall be used. Where the

outer sole design provides equal bridging support, shanks may not be used. An illustration of such a sole design is given in Fig.1. However any other design of sole with in-built bridging support may also be used.

5.2.6.3 Eyelets : Aluminium or steel eyelets conforming to size (collar diameter) 10 of Table-1 of IS : 5041/1978 shall be used.

Table 1 : Requirement of Direct Moulded Rubber Sole and Heels (Clause 5.2.1.1)

Sl. No.

Characteristic Require-ment

Method of Test, Ref. to IS:

1 2 3 4 i Relative density, Max 1.30 3400 (Part-9):1978 ii Hardness, Shore A, 70±5 3400 (Part-2):1980 iii Tensile strength, MPa, Min 10.5 3400 (Part-1):1987

Flexing resistance a) Number of cycles for initial crack, Min

60 000 iv

b) Cut growth at the end of 1 20 000 cycles, percent, Max

400

v Change in initial hardness, Shore A, after ageing at 100±1ºC for 24 h

+5 3400 (Part-4):1987 and 3400 (Part-2):1980

vi Elongation at break, percent, Min 250 3400 (Part-1): 1987

NOTES: 1. If the heels are compounded from same mix of soles, then it may not be tested for Sl. No.(iv) and (vi)

2. Reading from 30 to 95 in shore durometer. Type A are approximately same as

those in IRHD. TERMS OF DELIVERY & TAXES :

1) The rate is ex-factory inclusive of cost of packing, exclusive of Orissa entry tax and VAT which may be charged extra, as admissible, if any.

2) Time allowed for delivery of goods: a) Orders upto Rs.5000.00 … 30 days b) Orders upto Rs.5000.00 to Rs.10,000.00.. 45 days. c) For every subsequent of Rs.5000.00 … 15 days.

RATE CONTRACT CIRCULAR NO. 3572 dt.4.6.07,4237 dt.2.7.07

22. DRUGS & MEDICINES – 25 ITEMS.

1. Benzyl Benzoate Application IP 25% W/V

450 ml. in Amber Glass Bottle 20 bottles per box

510.20

21.2.2008

1. Chemie (India), I.E.,

Cuttack. 2. Universal Chemical &

Pharmaceutical Industries, I.E., Jagatpur, Cuttack.

3. Bubuna Chemicals, D-2/2, New I.E., Jagat-pur, Cuttack

4. Novo Pharmaceu-ticals Pvt. Ltd., I.E., Cuttack-10.

5. Bharat Salt & Chemical Indus-tries Ltd., Nayasarak, Cuttack-2.

6. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack.

7. Eastern India Pharmaceutical Laboratory, B-22, I.E., Bhubaneswar.

8. I.D.D. (P) Ltd., I.E., Cuttack

9. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack.

10. Surgiplast (India), Station Road, Berhampur

11. Bijoy Surgicals & Chemicals, Plot No. 120, New I.E., Jagatpur, Cuttack

12. Eastern Chemical

2. Tab. Chlorophe-naramine maleate 4 mg. IP.

3. Tab. Chloroquine Phosphate IP 250 mg (Coated.)

10 Tab. in strip 10 strip in 10 Tabs. per strip 10 Strip per box.

5.48 CB Box

29.55

Industries Pvt. Ltd., I.E., Cuttack-10.

(Twelve units only). 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 2. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2 3. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 4. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar 5. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack 6. Swaraj Chemical & Pharmaceutical Works, New I.E., Jagatpur, Cuttack 7.Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack. 8. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack. 9. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10.

(Nine Units only). 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack. 2. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2. 3. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 4. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10. 5. Kingsy Pharmace-utical Works, I.E., Mancheswar, Bhubaneswar 6. Panacea (P) Ltd., 184/185, New I.E.,

4.Tab. Diazapam IP 5 mg.

4. (a) Tab. Diethyle Carbamazine Citr-ate IP 100 mg. (Aluminium foil).

5(b) Tab. Diethyle Carbamazine Citr-ate IP 50 mg (Aluminium foil)

6.Tab. Dried Al. Hydroxide 250 mg + Magnesium Hydroxide

10 Tabs. in strip. 10 strips in CB Box. 10 Tabs. in strip. 10 strips in CB Box. 10 Tabs. in strip. 10 strips in CB Box. 10 Tabs. in strip. 10 strips

7.00

14.70

10.80

13.26

Jagatpur, Cuttack 7. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10. 8. Monday Medicines, Jaleswar, Balasore 9. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10

( Nine units only) 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 2.Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar. ( Two units only ) 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 2. Bhart Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2. 3. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 4. Swaraj Chemical & Pharmaceutical Works, New I...E., Jagatpur, Cuttack 5. Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack 6. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack 7. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10. ( Seven units only) 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 2. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack 3. Novo Pharmaceuticals

250 mg + methyle polysiloxane 50 mg NFI.

7. Syp. Diethyle Carbamazine Cit-rate IP 50mg/ 5ml.

8.Cap. Doxycycline IP 100 mg. (Aluminium foil.)

in CB Box. 450 ml. A.G. Bottle 20 bottles per box 10 Caps in strip. 10 strips in CB Box.

356.85

61.49

Pvt. Ltd., I.E., Cuttack-10 4. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10

( Four Units only). 1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 2. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar 3. Swaraj Chemical & Pharmaceutical Works, New I.E., Jagatpur, Cuttack 4. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack- 5. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10 6. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 7. Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack 8. Eastern Chemical Industries Ltd., I.E., Cuttack-10 ( Eight units only )

1. Universal Chemical &


2. I.D.D. (P) Ltd., Madhupatna, Cuttack-10.

( Two units only)

1. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack 2. I.D.D. (P) Ltd., Madhupatna, Cuttack-10 3. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack 4. Jagannath Chemical &

9.Tab. Frusemide IP 40 mg.(Aluminium foil)

10.Tab. Furazo-lidon IP

100 mg.(aluminium foil)

11.Tab. Ibuprofen IP

400 mg. (Coated).

10 Tabs. Per strips in Aluminium Foil, 10 strips in C.B.Box 10 Tabs. in strip. 10 strips Aluminium Foil in CB Box 10 Tabs. in strip. 10 strips in CB Box

17.19

14.24

32.40

Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 5. Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack 6. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack 7. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar 8. Eastern Chemical Industries Ltd., I.E., Cuttack-10 ( Eight units only)

1. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack. ( One units only )

1.Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack. 2.Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar. 3. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack 4. Novo Pharmaceuti-cals Pvt. Ltd., I.E., Cuttack-10 5. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack 6. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2 7. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack 8. Eastern Chemical Industries Ltd., I.E., Cuttack-10

12.Tab. Mebendazole

IP 100 mg. (Aluminium Foil)

13.(a) Tab. Metroni-dazole IP 400 mg. (Coated)(Aluminium

6 Tab. in strip 10 strips aluminium foil in CB Box

10 Tabs. in strip. 10 strips

9.00

39.50

(Eight units only)

1. Bubuna Chemicals,

D-2/2, New I.E., Jagatpur, Cuttack.

2. Bhart Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2.


4. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar

5. Swaraj Chemical & Pharmaceutical Works, New I.E., Jagatpur, Cuttack.

6. Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack.

7. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack

8. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack

9. Eastern Chemical Industries Ltd., I.E., Cuttack-10.

( Nine Units only)

1. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack.

2. Novo Pharmaceuti-cals Pvt. Ltd., I.E., Cuttack-10.

3. Bharat Salt & Chemical Industries Ltd., Naya Sarak, Cuttack.

4. Jagannath Chemical & Pharmaceutical Works (P) Ltd.,

Foil)

13.(b) Tab. Metroni-dazole IP 200 mg. (Coated)(Aluminium foil)

in aluminium foil in CB Box 10 Tabs. in strip in Aluminium Foil, 10 strips in CB Box

21.28

Nayasarak, Cuttack. 5. Kingsy

Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar.



8. Swaraj Chemicals & Pharmaceutical Works, New I.E., Jagatpur, Cuttack.


10. Monday Medicines, Jaleswar, Balasore.

(Ten units only)





5. Swaraj Chemicals & Pharmaceutical Works, New I.E., Jagatpur, Cuttack

6. Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack

7. Monday Medicines, Jaleswar, Balasore

8. Universal Chemical & Pharmaceutical Industries, I.E.,

14.Mercurochrome Solution 2% NFI.

15. Methyle Salicylate Ointment B.F..

16.(a) Nitrofurazone

Ointment USP (Water miscible base.

450 ml in A.G. bottle 20 bottles in CB Box 500 gms. in A.G. Bottle 500 gms. in Polyjar pack

401.00

78.26

39.22

Jagatpur, Cuttack 9. Novo Pharmaceuticals

Pvt. Ltd., I.E., Cuttack-10


11. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10.

( Eleven Units only)






6. Phyto Pharma-ceuticals (P) Ltd., I.E., Jagatpur, Cuttack

7. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10



10. Eastern Chemical

Industries Pvt. Ltd., I.E., Cuttack-10

(Ten units only)

16.(b). Nitrofurazone ointment USP 500 mg W/V 2% (polyglycol Base).

17.Tab. Paracetamol IP-500 mg.

500 gm in Amber glass jar, 20 jar in C.B.Box 10 Tabs. per strip in aluminium foil. 10 strips in CB Box

1292.80

20.62

1. Chemie India, I.E.,

Cuttack. 2. I.D.D. (P) Ltd., I.E.,

Cuttack-10 3. Eastern Chemical

Industries Pvt. Ltd., I.E., Cuttack-10

4. Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack


6.Bijoy Surgicals & Chemicals, New I.E., Jagatpur, Cuttack.

(Total Six units only)

1. Chemie India, I.E., Cuttack.

2. I.D.D. (P) Ltd., I.E., Cuttack-10


4. Bijoy Surgicals & Chemicals, New I.E., Jagatpur, Cuttack

(Four units only)


2. Bijoy Surgicals & Chemicals, New I.E., Jagatpur, Cuttack.

(Two units only) 1. Chemie India, I.E.,

Cuttack 2. Phyto

Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack

3. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack

4. I.D.D. (P) Ltd., I.E., Cuttack-10

5. Panacea (P) Ltd., 184/185, New I.E.,

18.Syp.Paracetamol IP 125 mg/5ml.

19.Tab. Riboflavin (Vit.B2 ) IP 10 mg (Aluminium foil)

450 ml in Ambar Glass bottle

10 Tabs. per strip in aluminium foil. 10 strips in CB Box

27.35

8.56

Jagatpur, Cuttack 6. Surgiplast (India),

Station Road, Berhampur

7. Bijoy Surgicals & Chemicals, New I.E., Jagatpur, Cuttack (Seven units only)

1. Bubuna Chemicals, I.E., Jagatpur, Cuttack.

2. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack.






8. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10

9. Eastern Chemical Industries Pvt. Ltd., I.E., Cuttack-10

(Nine units only)

1. Eastern India

Pharmaceutical Laboratory, B-22, I.E., Bhubaneswar.

2. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-

20.(a) Tab. Salbutamol IP-4 mg.

21.Tab. Sulpham-ethoxazole 400mg + Trimethoprim 80mg. IP (Aluminium foil)

10 Tabs. per strip. 10 strips in CB Box 10 Tabs. per strip in aluminium foil. 10 strips in CB Box

9.56

45.50

10. 3. I.D.D. (P) Ltd., I.E.,

Cuttack-10 4. Bijoy Surgicals &

Chemicals, New I.E., Jagatpur, Cuttack.

5. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack.





(Nine units only) 1. Jagannath Chemical

& Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack.






7. Universal Chemical & Pharmaceutical

22.(a) Cap. Tetra-cycline 500mg. IP (Aluminium Foil)

22. (b) Cap. Tetracy-cline 250mg. IP (Aluminium Foil).

23. (a) Tr. Iodine (Strong) USP.

10 Caps. per strip aluminium foil. 10 strips in CB Box 10 Caps. Per strip aluminium foil. 10 strips in CB Box 450 ml in Ambar Glass Bottle

70.06

42.25

44.65

Industries, I.E., Jagatpur, Cuttack.

8. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10.

(Ten units only) 1. Universal Chemical &



(Two units only)


I.E., Jagatpur, Cuttack.

2. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2.



5. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar.



8. Monday Medicines, Jaleswar, Balasore

9. Universal Chemical & Pharmaceuticals, I.E., Jagatpur, Cuttack

10. Novo

23.(b) Tr. Iodine USP.

24.(a) Tab. Vitamin-C (Ascorbic Acid) 500mg IP (Aluminium Foil)

25.Compound Benzoic Acid ointment I.P.(Whit’s Field

450 ml in Ambar Glass Bottle 20 Bottle per box. 10 Tabs. per strip in aluminium foil. 10 strips in CB Box 500 gm. in polyjar pack

905.05

15.71

1240.65

Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10.


(Eleven units only)

1. Bubuna Chemicals, I.E., Jagatpur, Cuttack.

2. Eastern Chemical Industries (P) Ltd., I.E., Cuttack-10.


4. I.D.D. (P) Ltd., Madhupatna, Cuttack-10.



(sixunits only)






5. I.D.D. (P) Ltd., I.E., Cuttack-10.



Ointment IP.

20 jars per box


(Eight units only) 1. Novo


2. Eastern India Pharmaceutical Laboratories, B-22, I.E., Bhubaneswar.




(Five units only) 1. Novo


2. Eastern India Pharmaceutical Laboratories, B-22, I.E., Bhubaneswar.




(Five units only) 1. Eastern Chemical

Industries Pvt. Ltd.,

I.E., Cuttack. 2. Bubuna Chemicals,


3. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar.

(Three units only) 1. Chemie (India), I.E.,

Cuttack-10. 2. Surgiplast (India),

Station Road, Berhampur.

3. Bijoy Surgicals & Chemicals, Plot No.120, New I.E., Jagatpur-20.

4. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack. (four units only)

TOTAL NUMBER OF UNITS HOLDING RATE CONTRACT FOR THE ABOVE ITEMS - 24.

1. Chemie (India), I.E., Cuttack-10.(Upto 22.2.07) 2. Panacea (P) Ltd., 184/185, New I.E., Jagatpur, Cuttack(Upto 31.12.07) 3. Eastern India Pharmaceutical Laboratories, I.E., Bhubaneswar(Upto 21.2.08) 4. Kingsy Pharmaceutical Works, I.E., Mancheswar, Bhubaneswar(Upto 31.12.07) 5. Universal Chemical & Pharmaceutical Industries, I.E., Jagatpur, Cuttack.(Upto 31.12.07) 6. Monday Medicines, Jaleswar, Balasore(Upto 31.12.07) 7. I.D.D. (P) Ltd., Madhupatna, Cuttack-10.(Upto 21.2.08) 8. Swaraj Chemicals & Pharmaceutical Works, New I.E., Jagatpur, Cuttack(Upto 21.2.08) 9. Novo Pharmaceuticals Pvt. Ltd., I.E., Cuttack-10.(Upto 21.2.08) 10. Bharat Salt & Chemical Industries Ltd., Nayasarak, Cuttack-2(Upto 21.2.08) 11. Jagannath Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack((upto 21.2.08) 12.Phyto Pharmaceuticals (P) Ltd., I.E., Jagatpur, Cuttack.(Upto 21.2.08) 13.Surgiplast (India), Station Road, Berhampur((Upto 30.6.07) 14.Bubuna Chemicals, D-2/2, New I.E., Jagatpur, Cuttack(Upto 20.2.08) 15.Bijoy Surgicals & Chemicals, Plot No. 120, New I.E., Jagatpur, Cuttack(Upto 30.6.07) 16.Eastern Chemical Industries (P) Ltd., I.E., Cuttack-10.(Upto 21.2.07)








Period of validity


FRP DOOR SHUTTER AND FRP DOOR FRAME. FRP Door shutters (GRP) of 32mm thick. (Detail specification at Annexure-A and drawing B & B-1 are enclosed) FRP Door Frame (GRP) of 75mmx100mm (Detail specification at Annexure-A and drawing and design at Annexure-C are enclosed.

Per sqr. mtr. Per running metre

1930.00

328.00

14.02.2009 (Extension vide circular No.8186 26.11.07)

1. Fibre Space Composites

Pvt. Ltd., Plot No.A/25, Sector-B, Chandaka I.E., Patia, Bhubaneswar.

23.


1) The rate is ex-factory, inclusive of cost of packing and exclusive of VAT which may be charged extra as applicable, if any.

2) In case of bulk supply, pre-delivery inspection may be made compulsory at the desire of the purchaser and as such one out of ten lots supplied by the unit shall be tested by CIPET, BBSR. The test certificate issued by the CIPET shall be submitted to the purchaser in order to ensure the quality of the store item.

3) The delivery schedule may be mutually decided between the rate contract holder and the indenting officer.

RATE CONTRACT CIRCULAR NO. 1241 dt. 14.02.2008



Period of validity


24.

G.I. STAY WIRE G.I.STAY WIRE as per ISS No.2141/79. The relevant standard indicated therein Grade-4 having minimum tensile strength 700N/mm square and galvanised with heavy quoted wire hand type conforming to ISS-4826 with latest amendment etc. Size: A) 7/8 SWG(4mm)

03.01.09

1. Orissa Steel & Wire

Products (P) Ltd., B-14, I.E., Cuttack-10.

(Annual production capacity – 450 T. Rs.316 lakhs

2. Sheo Industries, C-8,

I.E., Cuttack-10.

B) 7/10 SWG(3.15 mm)

Per MT Per MT

44,232.00 44,644.00

TERMS OF DELIVERY & TAXES : 1. The rates are ex-factory exclusive of VAT and entry tax which may be charged extra, as admissible,

if any. 2. The delivery schedule may be mutually decided between the indenting officer and the contractor.

RATE CONTRACT CIRCULAR NO. 120 dt. 04.01.2008 Description of the store item


Period of validity


G.I.BARBED WIRE G.I. BARBED WIRE conforming to IS No.278/78 with minimum breaking load of completed barbed wire 370 kg or 3.70 KN.

.

42,850.00 Rate per

M.T

22.06.08 (Extenstion vide circular No.113 dt.4.1.08)

1. M/s. Orissa Steel &

Wire Products (P) Ltd., B-14, I.E., Cuttack-10 M/s. Sheo Industries, C-8, I.E., Cittack-10.

2. M/s. Sheo Industries, I.E., Cuttack-10

25.


1. The rate is inclusive of excise duty, exclusive of VAT and entry tax which may be charged extra, as admissible, if any.

2. The delivery schedule may be mutually decided between the contractor and the indentor.



Period of validity


G. I. FLAT G. I. Flat of standard sizes 5.6 mtrs. Long conforming to IS No.2062, 2629 & 4759.

1. 50x6mm 2. 75x10mm

Rate per Kg.

35.25 36.85

03.09.2007

1. M/s. New Modern

Technomech (P) Ltd., S-2/29, I.E., Chhancha, Baripada, Mayurbhanj-757001.

26. TERMS OF DELIVERY & TAXES :

1. The rates are ex-factory, exclusive of central excise duty, VAT and entry tax which may be

charged extra, as admissible, if any. 2. Minimum time allowed for delivery of goods will be mutually decided between the indenting

officer and the supplier. Rate Contract Circular No. 1339 dt.04.03.2006, 2235 dt.24.3.07 Description of the store item


Period of validity


27. GREAT COAT:

A) Great Coat for Reserve Inspectors and surgents as per the sample approved by Orissa Police. The cloth are to be used conforming to IS:674/74 (2nd Revision). DIMENSIONS: Length – 49-51” Chest - 53-55” sleeve – 34-35” Whorst – 57” Skirt – 67” Neck – 19” Back – 20” Turned off – 6” Length of half belt-10” B) Great Coat for ASI, Habildars and Constables as per sample approved by Orissa Police. The cloth are to be used conforming to IS No.679/74 (2nd revision). The lining cloth shall be nylon lining cloth. DIMENSIONS: Length – 49-51” Chest - 53-55” sleeve – 34-35” Whorst – 57” Skirt – 67” Neck – 19” Back – 20” 1. The Great coat shall

be made out of light grey crish feize cloth.

Per each

545.00

515.00

28.01.2009 subject to validity of EPM registration and VAT certificate.

1. Goenka Enterprise,

Town Hall Road, Ward No.12, Holding No.336, Cuttack-9. (Annual Production Capacity –12000 Pcs.) (Valid upto 25.10.2008)

2. Sushree Garments, New Rousa Patna, Cuttack. (Valid upto 19.12.2008)

3. Vishal Industries, Rovers Street, Buxi Bazar, Cuttack-1 (Annual Production Capacity – 6000 nos.) (Valid upto 24.07.2008)

4. Kalinga Industries, Jaunliapatti, Cuttack-9. (Annual Production Capacity- 15000 Pcs. )(Valid upto 28.01.2009)

5. Saswot Industries, Taranibihar, Bidanasi, Cuttack (Annual Production Capacity – Rs.25,00,000/-) (Valid upto 08.04.2008)

6. Usha Udyog & Garments, Meria Bazar, Cuttack (Annual Production Capacity – Rs.10,00,000/-) (Valid upto 22.07.2008)

2. Turned down collar

shall be provided.

3. 4 button holes on left front and 4 button eyelets on right front shall be provided.

4. Double belt at back with button holes on left strap and 3 button eye lets on right strap shall be provided.

5. Turned up cutt shall be provided.

6. Two side pockets with flap unbutton on each attached to be inside tongue shall be provided.

7. Inside lining cloth shall be silken in case of great coat of Surgent/ Reserve Inspector. In case of great coat of Habildar/ ASI nylon lining cloth shall be provided.

8. The cloth shall conform to IS No. 679/74 (2nd revision).

7.


1. The rates are ex-factory, exclusive of value added tax (VAT) and entry tax which may be charged extra as admissible, if any.

2. The delivery schedule may be mutually decided between the indenting officer and the supplier. RATE CONTRACT CIRCULAR NO. 775 dt.29.01.2008, 1006 dt.6.2.2008 Description of the store item


Period of validity


28.

H.T. INSULATOR (DISC. INSULATOR) 11 KV string insulator (Disc. Insulator) for

Rate per each

30.09.2007

28) M

ayur Electro Ceramics

overhead power line conforming to IS:731/71

1) Tongue & Clevis type EMS-45KN

2) Ball & Socket Type EMS-70 KN

226.00

236.00

(P) Ltd., At/P.O. Pratapgarh, Via. Rairangpur, Dist. Mayurbhanj-50.


1. The rates are ex-factory inclusive of cost of packing and exclusive of entry tax and VAT which may be charged extra, as admissible, if any.

2. The delivery schedule may be mutually decided between the rate contractor holder and the in denting officer.

3. The rate contract holding firm shall furnish drawings and details of parameters of the store item at the time of execution of supply order.

4. The rate contract holding firm shall have to get its products type tested at CPRI/NIT/NTH at an interval of 2 years.



Period of validity


29.

H.T. STAY SET 1. M.S. Stay Rod of 20mm

dia 1800mm in length, one side formed an eye and welded with internal dia 40mm with one thimble and the other side of the rod is threaded and fitted with 2 nos. of suitable hexagonal nuts and with one round washer of 3mm thickness complete with M.S.Anchor plate 250x250x6mm, dimensions with centre hole of 22mm dia. The entire rod, plate, thimble, nuts and washer should be hot dipped galvanised as per IS:2633-1972 (As per OSEB Drawing No.9634/92)

2. Single Bow tum buckle made of 16mm dia

Per set

583.00

13.03.2009 (Subject to validity of EP&M Registration certificate & VAT Clearance Certificate)

1. Indian Metal Industries,

Nayabazar, Cuttack-4 2. Kirti Industrial

Enterprise,11/9, I.E., Cuttack-10

3. New Modern Technomech Pvt. Ltd., S-2/29. Chancha I.E., Station Bazar, Baripada, Mayurbhanj-757001.

M.S.Rod and the centre rod of 20mm dia of length 450mm with one end formed an eye and welded. The threaded length of the centre rod should be 300 mm. The base channel of the bow of size 75x40x6mm and 180 mm in length with thimble and 2 nos. suitable hexagonal nuts. The items should be hot dipped galvanised as per IS:2633/1972 (as per OSEB Drawing No.9635/92).


1. The rate is ex-factory, exclusive of excise duty, value added tax (VAT) and Orissa Entry Tax which may be charged extra as admissiable if any.

2. The delivery schedule may be mutually decided between the contractor and the indenting officer.



Period of validity


30.

HOSPITAL BED STEAD 1. Hospital Bed Stead,

General purposes, top made out of 1.25mm C.R. sheetwith plate corner fittings conforming to IS:5029/79 with amendment No.1 & 2, with four Nos. of mosquito net pole of 1.50 mtr. Length each made out of 19.05mm OD x 1.22mm thick M.S. Tube & Provision of two nos of 50mm length M.S.Tube of 25.40mm O.D. x 1.22mm thick at four corners of the bed for installing mosquito

Rate per each

2200.00

8.4.2009 (Subject to validity of EP&M Regn. Certificate)

1. Konark Industries, S.E.-

11, I.E., Madhupatna, Cuttack-10

2.Rollex Enterprisers, Type-II-12, I.E., Cuttack-10.

3.Radha Enterprises, Nayasarak,Cuttack

4.Steelex Industries, A.B.Road, Nima Sahi, Cuttack-753001.

5.Leo Engineers Pvt. Ltd.,93/B/1, New, I.E., Phase-II, Jagatpur, Cuttack(Valid upto 11.9.2008)

net. 2. Hospital Bed Stead

general purposes, top made out of 1.25mm G.P.Sheet with plate corner fittings conforming to IS:5029/79 with amendment No. 1 & 2 with four nos of mosquito net pole of 1.50 mtr length each made out of 19.05 mm O.D. x 1.22mm thick M.S. tube & provision of two nos of 50mm length M.S. tube of 25.40mm O.D. x 1.22mm thick at four corners of the bed for installing mosquito net.

2190.00


1. The rates recommended for conclusion of rate contract are ex-factory, exclusive of VAT and Orissa Entry Tax, which may be charged extra, as admissible if any.

2. Minimum time allowed for delivery of goods will be mutually decided between the indenting officer and the contractor.




Period of validity


31.

ISI marked Direct Action Hand Pump consisting of

(i)CylinderAssembly (ii)Pump Head Assembly (iii)RetrievingRod Assembly Rising main &

combination & spanner suitable for tube well assembly consisting of upper casing, lower casing & well screen assembly conforming to IS: Specification No.14106/96 with subsequent amendment, if any, for the depth of 40 mtrs.

Per set Rs.7,179.00 Upto 24.3.2008 (Subject to validity of EPM regn. Certificate, VAT Clearance Certificate & BIS) licence

M/s. Ori Plast Ltd., O.T. Road, Balasore.


1. The Rates is ex-factory, inclusive of excise duty, exclusive of Inspection charges, VAT and entry tax which may be charged extra, as admissible, if any. The Indenting authorities should ensure valid BIS Licence of the store item at the time of purchase.

2. Inspection of the store item will be conducted by BIS. Inspection by CIPET may be made at the

instance of Indenting Officers, if necessary. 3. Minimum time to be allowed for delivery of goods will be mutually decided between the Indenting

Officer and the contractor. RATE CONTRACT CIRCULAR NO. 4844 dt.25.09.2006, 6811 dt.23.12.2006, 2108 dt.19.3.2007, 7463

dt.15.10.2007 Description of the store item


Period of validity


ISI MARKED DEEP WELL HAND PUMP STANDARD(SWDP) AND 32mm N. B. RISER PIPE IS:NO.15500 (PT-2)/ 2004 ISI Marked Deep well Hand Pump Standard (SDWP) conforming to IS:15500(Part-2) 2004 complete with accessories and alongwith 8 nos. of riser pipe of 32mm nominal bore, hot dip galvanised screwed and socketed, fitted with socket made of seamless or machined from solid bar, sockets fitted at one end and thread protector at the other end and & with 8 nos. of connecting rods made of bright bar electro galvanised fitted with coupler and fitted with stand assembly, suit-able for use in bore wells/ casing of 100 mm and 125 mm N. B. minimum (composite set)

Per each

9092.00

32.

ISI Marked Deep well Hand pump Standard (SDWP) conforming to IS:15500 (Part-2)2004 with latest amendments

Per each 5156.00

24.03.2008 (E) subject to validity of EPM registration and BIS licence.

1. Bhagirathi Metal Industries Pvt. Ltd., S-1/116 & 101, IDCO’s New I.E., Rasulgarh, Bhubaneswar-10.

2. M.M. & Co., B-30, I.E., Cuttack-10. 3. Orissa Pump & Engg.

Co. Ltd., B-7, 8 & 9, I.E., Jagatpur, Cuttack-21. 4. Koshala Udyog, B-23, I.E., Rourkela-4. (Upto 31.8.2007)

with 8 nos. of connecting rod made out of bright bar of 12mm dia meter and 3.0 mtrs. long with hexagonal coupler as per the relevant IS specification referred therein but without riser pipe. Additional length of Riser Pipe, 32mm nominal bore hot dipped galvanized screwed and socketed in 3.0 mtrs. length with a tolerance of ± 0.25mm conforming to IS:1239 (Pt.I)/latest amendment medium class. One end of the riser pipe shall be fitted with hot dipped galvanized socket and the other end with thread protector. The socket shall be manufactured from seamless pipe with the dimension (length and diameter) as specified in IS:1239 (Pt.II)/latest amend-ment and shall be hot dipped galvanized.

Per each 492.00


1. The rate contract are f.o.r. destination inclusive of cost of packing, exclusive of VAT and entry tax which may be charged extra, as admissible, if any.

2. The delivery schedule will be mutually decided by the indentor and the supplier. 3. Only ISI marked stores shall be supplied. BIS licence should be valid at the time of supply of

stores. 4. The rate contract of SSI units shall be automatically suspended/ cancelled in case of BIS licence is

suspended/ cancelled. INSPECTION: The indenting officer shall get the inspection conducted by any agency appointed by

him. The rate contract holder will provide necessary facilities for smooth inspection. Inspection charges, if any, will be borne by the indenting officer.

RATE CONTRACT CIRCULAR NO. 1923 Dt.9.3.2007, 2566 dt.18.4.2007


Unit Rate per unit

Period of validity


Rs. ISI MARKED COMMON SALT – IRON FORTIFIED CONFORMING TO IS: NO. 12981/91

Per bag 6.35 15.9.2008 1. Prince International, Health Care (P) Ltd., A/2, Bhagabanpur, Indl. Estate, Patrapada, Bhubaneswar (Production Capacity as per DIC PMT Certificate – 24000 M.T.)


• The rate s exfactory, inclusive of cost of packing of 500 gm. Net pack in LDPE bag and 25 Kg. i.e. 50 nos. of 500 gm. Net pack in HDPE Bag and exclusive of value added tax and exclusive of VAT and entry tax which may be charged extra, as admissible, if any.

• The minimum time allowed for delivery of goods and the delivery schedules may be mutually decided between the rate contract holder and the Indenting Officer.

RATE CONTRACT CIRCULAR NO. 4874 dt.25.09.2006. Description of the store item


Period of validity


34.

ISI MARKED RIGID UPVC PIPES: Technical Specification of ISI Marked UPVC Pipes IS: No.4985/2000. The Rigid Unplasticized PVC pipes for plain as well as socket ended pipes including those for portable water supplies conforming to IS:4985/2000 shall have the following requirement: 1. Raw materials: The raw material used shall conform to the IS:4985/2000 IS:10124/1998 and IS:14182/1994. 2. Classes: The class of pipes shall be pressure rating (working pressure) at 27°C from Class-I to Class-4. 3. Length: The effective length of pipe shall be 4,5,

Rate per meter

As per Statement-A

07.08.2008) subject to validity of EPM registration and BIS licence & VAT Clearance Certificate

or 6 meters. The Pipes may be supplied in other lengths as per the requirements of indentor. 4. Marking: Each pipe shall be clearly and indelibly marked in ink or stenciled conforming to IS Specifications and shall show the following. • Manufacturers name

and trade mark. • Outside diameter. • Class of pipe and

pressure rating. • Batch or lot number. • Colour marking as per

ISS: • Each pipe shall be

marked with BIS standard mark.

The weightage, meterage and rates of each class and size of pipe shall be in conformity as per the rate chart enclosed. 5. Solvent Cement should be packed in suitable plastic container with proper sealing. MARKING: B. Manufacturer name

and trade name. C. Type D. Batch No.

/Manufacturing date.

E. Quantity.

The Colour of the pipe shall be grey/ivory grey.


• The store item shall be ISI marked. • Only ISI marked stores shall be supplied. BIS licence would be valid at the time of

supply of stores. • Rate contract of the SSI units will be automatically suspended/ cancelled in case the

BIS licence is suspended/cancelled. • The ISI certification marks, the name of the manufacturer or trade mark only with batch

No., Class of pipes and sizes of pipes shall be stencilised legibly on each pipe. • Any suspension/cancellation of BIS licence shall be intimated to this

Directorate/indentor’s by the Contractor. • All pipes would be accepted subject to testing by CIPET, BBSR. • Pre-delivery inspection for all supplies of PVC pipes shall be conducted jointly by the

technical officer of the Directorate of EP&M & CIPET, Bhubaneswar.

TIME ALLOWED FOR DELIVERY OF PIPES:

• The delivery period will be normally for 15 days or as mutually decided between the rate contract holder and the indenting officer.

RATE CONTRACT CIRCULAR NO. 3974 dt.8.8.06, 4533 dt.11.9.06, 5224 dt.13.10.06, 6296

dt.1.12.06, 6794 dt.23.12.06, 314 dt.10.1.07, 1558 dt.27.2.07, 1905 dt.9.3.07, 3685 dt.7.6.07, 3822 dt.14.6.07, 4263 dt.3.7.07, 6012 dt.4.8.07, 6028 dt.4.8.07, 6044 dt4.8.07, 564 dt.21.1.08, 1682 dt.25.02.2008,2128 dt.19.3.2008

NAME OF THE UNITS: NOMINAL OUT DIAMETER OF PIPE FOR WHICH R/C HAS BEEN CONCLUDED AGAINST EACH ITEM. 1. Duro Pipes (P) Ltd., Plot No.51/A, Sector-A,

Zone-A, I.E., Mancheswar, Bhubaneswar. (Valid upto 07.08.2007 subject to validity of EPM Regn, BIS licence and VAT clearance certificate)

Upto 250mm

2. Konark Pipe & Synthetics (P) Ltd., B-9, I.E., Mancheswar, Bhubaneswar.

(Valid upto 07.08.2007 subject to validity of EPM Regn, BIS licence and VAT clearance certificate)

Upto 200mm

3. Krishna Plast Pipes (P) Ltd., I.E., Railway Station Road, Bargarh.


i.Upto 200mm ii. 250mm in Class 1 & 2 for socket ended pipe

4. Jaiswal Plastic Tubes Ltd., Ganeswarpur I.E., N.H-5, P.O. Januganj, Balasore.


Upto 315mm

5. Lingaraj Pipes (P) Ltd., Plot Nlo.13-A, I.E., Chandaka, Khurda.

(Valid upto 07.08..2007)

1. 90mm to 315mm in Class-I 63mm to 315mm in Class-II 63mm to 180mm in Class-III (Both plain and bell ended) 2. 200mm to 315mm in Class-III (Plain ended)

6. Shree Plastics (P) Ltd., Andhapasara Road, Berhampur, Ganjam.

(Valid upto 07.08.2007)

1. 90mm to 110mm , 160mm and 200mm in Class-I

2. 63mm to 110mm and 160mm in Class-II

3. 40mm to 110mm and 140mm to 180mm in Class-III (Both plain and bell ended)

7. M/s. Oriplast Ltd., O.T. Road, Balasore. Included consequent upon the orders dt.11.09.2003 of the Hon’ble High Court, Orissa, Cuttack passed in the WPC No.6923/02 and WPC No.4653/2003 & 5456/2003. (Valid upto 07.08.2007 subject to validity of EPM Regn, BIS licence and VAT clearance certificate)

Upto 630mm

8. M/s. Swasteek PVC Pipes, At- Sanakusastali, Badakustali, Berhampur, Ganjam, Orissa (valid upto 7.2.2008)

a) 90mm to 110mm and 200mm socket ended & 125 mm to 180 mm plain ended in Class-I

b)63mm to 110mm plain ended & socket in Class-II, 125mm to 180mm & 200 mm socket ended in Class-II

c)40mm to 110mm & 200 mm with socket ended & 125mm to 180 mm plain ended in Class-III

9.M/s. PGL Supply & Services (P) Ltd., Plot No.1-A, Chandaka Neucleus Complex, Sector-B, Patia, Bhubaneswar

a)90 to 110mm, 140, 160,180mm & 200mm in Class-I socket pipe

b)63 mm to 110 mm, 140, 160, 180mm & 200mm in Class-II socket pipe

c)40 to 110mm, 140 to 180mm & 200mm in Class-III socket pipe

10.M/s. Hari Udyog (P) Ltd., O.T.Road, Balasore a)Class-I – 90mm to 250mm b)Class-II-63 mm to 260mm c)Class-III 40 to 250mm all are socket ended

STATEMENT-A

Statement of rates of different sizes of ISI Marked UPVC Pipes as per IS No.4985/2000 along with average weight in Kg. per running metre. Rate per Kg. Rs.67.25 (Rupees sixty seven and paise twenty five) only including cost of solvent cement.

Class-I 0.25 mpa

Class-II 0.4 mpa

Class-3 0.6 mpa

Class-4 0.8 mpa

Sl. No.

Size in mm Qty. in kg.

per running meter

Rate per meter (Rs.)

Qty. in kg. per running meter






1 25 - - - - - - 0.152 10.22 2 32 - - - - - - 0.236 15.87 3 40 - - - - 0.281 18.89 0.347 23.33 4 50 - - - 0.428 28.78 0.553 37.18 5 63 - - 0.476 32.01 0.677 45.52 0.835 56.15 6 75 - - 0.667 44.85 0.939 63.14 1.204 80.96 7 90 0.606 40.75 0.940 63.21 1.344 90.38 1.682 113.11 8 110 0.889 59.78 1.346 90.51 1.935 130.12 2.510 168.79 9 125 1.123 75.52 1.751 117.75 2.553 171.68 3.257 219.03 10 140 1.384 93.07 2.180 146.60 3.169 213.11 4.133 277.94 11 160 1.832 123.20 2.847 191.46 4.080 274.38 5.383 362.00 12 180 2.304 154.94 3.642 244.92 5.221 351.11 6.725 452.25 13 200 2.829 190.25 4.405 296.23 6.459 434.36 8.338 560.73

14 220 3.636 244.52 5.605 376.93 8.110 545.39 10.507 706.59 15 250 4.379 294.48 6.788 456.49 10.054 676.13 13.080 879.63 16 280 5.594 376.19 8.597 578.14 12.615 848.35 16.355 1099.87 17 315 7.002 470.88 10.864 730.60 15.989 1075.26 20.593 1384.87 18 350 8.770 589.78 13.821 929.46 20.132 1353.87 26.211 1762.68 19 400 11.227 755.01 17.444 1173.10 25.582 1720.38 33.267 2237.20 20 450 14.148 951.45 22.225 1494.63 32.344 2175.13 42.025 2826.18 21 500 17.404 1170.41 27.364 1840.22 39.999 2689.93 52.109 3504.33 22 560 22.004 1479.76 34.385 2312.39 50.095 3368.88 65.182 4383.48 23 630 27.728 1864.70 43.450 2922.01 63.418 4264.86 82.365 5539.04



Period of validity


KHAKI WOOLEN BERET CAP (APR & OR) 1.Khaki Woolen Beret Cap (APR) as per the specification of Orissa Police, Cuttack as follows: Khaki Woolen Cloth round shaped with thick cotton lining inside and a tape of ½” width to fit the head with a small bow with black band tape. 2.Khaki woolen Beret Cap (OR) as per the specification of Orissa Police, Cuttack as follows: Khaki Woolen cloth round shaped with thick cotton lining inside and a tape of ½” width to fit the head with a small bow with black band tape and red woolen Diamond shaped piece stitched on the center of forehead to accommodate the cap badge.

Per each Per each

Rs.24.00 Rs.25.00

10.10.2008 from the date of issue of this rate contract circular (Subject to validity of EP&M Rgn. Certificate & VAT Clearance Certificate

1.M/s. Suruchi, Mahatab Road, Kalinga Lane, Cuttack-12 (Annual Production Capacity – 1,20,000 nos.) 2.M/s. Utkal Enterprises, Behind Hind Cinema, Ranihat, Cuttack-7(Annual production capacity – 1,20,000 nos. as per the DIC PMT regn. Certificate) 3.M/s. Goenka Enterprises, Town Hall Road, Cuttack-9 (20,000 nos. as per the DIC PMT Regn. Certificate) (Valid upto 29.08.2008) 4.M/s. Saswot Industries, Tarinivihar, Bidanasai, Cuttack (Annual Production Capacity – Rs.25,00,000/- as per the DIC PMT Regn. Certificate) (Valid upto 08.04.2008)

Terms of Delivery: 1.The rate is ex-factory, inclusive of cost of packing & excise duty but exclusive of Value Added Tax and

Orissa entry tax which may be charged extra as admissible if any. 2.The delivery schedule may be mutually decided between the Indenting Officer and the rate contract

holding SSI unit. Rate Contract Circular No. 7401 dt.11.10.07,7748 dt.02.11.2007, 8179 dt.26.11.07 Description of the store item


Period of validity


35. 36. L.T.CROSS ARM:

1. L.T.Cross Arm 3

Per kg.

30.60

09.01.2008(E)

1. Sheo Industries, E-8,

Phase 4 wire made out of M.S. Channel 75x40mm as per OSEB Drawing No.3815/74 having approx weight of 7.88 Kg.

2. L.T.Cross Arm Single phase 2 wire made out of M.S. Channel 75x40mm as per Drawing No.3815/75 having approx weight of 3.62 Kg.

32.20

subject to validity of EPM Regn. certificate and VAT clearance certificate.

Industrial Estate, Cuttack-10.

2. Utkal Metal Products (P) Ltd., C-3, I.E., Berhampur-10, Dist. Ganjam.

3. Indian Metal Industries, Nayabazar, Cuttack-4.

4. Jena Engineering Works, Utkal Ashram Road, Berhampur-1, Dist. Ganjam.


• The rates are ex-factory exclusive of value added tax and Orissa entry tax which may be charged extra as admissible, if any.


RATE CONTRACT CIRCULAR NO. 3441 dt. 10.07.2006, 6347 dt.20.8.07 Description of the store item


Period of validity


L.T. G.I. Pin 1. L.T. G.I. Pin

conforming to IS:7935/75 & R.E.C. standard 0.2

2. 11 KV G.I. Pin

conforming to IS:2486(Pt.I)/71

3. 33 KV G.I.Pin

conforming to IS:2486(Pt.I)/71

Rate per each

Rate per each

Rate per each

29.00

46.00

150.00 Ex-factory

17.01.2008(E) subject to validity of EPM Regn. Certificate and VAT clearance certificate.

1. New Modern

Technomech (P) Ltd., S-2/29, Chancha I.E., Station Bazar, Baripada, Mayurbhanj-757001.

37.


• The rates are ex-factory exclusive of value added tax and entry tax which may be charged extra as admissible, if any.

• The delivery schedule may be mutually decided between the indenting officer and the contractor.

RATE CONTRACT CIRCULAR NO. 3634 dt. 18.07.2006, 6347 dt.20.8.07



Period of validity


L.T.STAY SET 1. M.S.Stay Rod of 16mm

dia1800mm in length one side formed an eye and welded with internal dia 40mm with one thimble and the other size of therod is threaded and fitted with 2 nos. Suitable hexagonal nuts and with one round weasher of 3mm thick ness complete with one M.S. anchor plate of size 150x150x6mm with centre hole of 40mm dia. The entire rod, plate, thimble, nuts and washer should be not dipped galvanised as per IS:2633/72 (As per OSEB Drawing No.9636/92)

2. Single bow turn buckle made of 16mm dia M.S. Rod and the centre rod of 20mm dia of length 450mm with one end formed an eye and welded. The threaded length of the centre rod should be 300mm. The base channel of the bow of size 50x50x6mm and 180mm in length with thimble and 2 nos suitable Hexagonal nuts with items should be hot dipped galvanised as per IS:2633/1972 (As per OSEB Drawing No.9635/92)

Rate per set

333.00

13.03.2009 (Subject to validity of EP&M Regn. Certificate & VAT Clearance Certificate)

1. Indian Metal Industries, Nayabazar, Cuttack-4 2. Kirti Industrial Enterprise,11/9, I.E., Cuttack-10 3. New Modern Technomech Pvt. Ltd., S-2/29. Chancha I.E., Station Bazar, Baripada, Mayurbhanj-757001.

38.


1. The rate is ex-factory, exclusive of excise duty and value added tax which may be charged extra as admissible, if any.

2. The delivery schedule may be mutually decided between the contractor and the indenting officer. RATE CONTRACT CIRCULAR NO. 2271 dt.27.03.2008 Description of the store item


Period of validity


LEAD ACID STORAGE BATTERY: ISI Marked lead acid storage battery for motor vehicles as per IS No. 7372/95 (Uncharged): Type of Batteries a) 6 V 17 plates 120AH b) 6 V 19 plates 135AH c) 6 V 21 plate 150 AH d) 12V 7 plate 45 AH e) 12V 9 plate 60AH f) 12V 13 plate 88AH g) 12V 19 Plates 135AH h) 12V 21 plates 150AH i) 12 V 25 plates 180 AH

Rate per each

1763.00 1902.00 2039.00 1521.00 1792.00 2581.00 3793.00 4225.00 4869.00

15.07.2008

1. Jyoti Battery Industries, New I.E., Jagatpur, Cuttack-21.

39.


1. The rates are ex-factory and exclusive of excise duty & exclusive of entry tax and VAT which may be charged extra, as admissible if any.

2. The battery should bear ISI certificate mark as per IS No.7372/95 and the rate contract holding firm shall produce the valid BIS licence at the time of delivery of the store item and at the time preferring bills for payment.

3. There shall be service guarantee for one year from the date of putting the battery into operation after initial charging. All repairs shall be carried out by the contractor during this period free of charges including freight, if any. The storage life of the battery shall be guaranteed for a period of 24 (twenty-four) months from the date of supply.

4. The delivery schedule will be mutually decided by the indentor and the supplier



Period of validity


40.

L.D.P.E. BAG: Low Density Poly-thene

Rate per

107.00

24.03.2009

1. Poly Printex, Plot No.

Bag excluding vest and type and ‘D’ punched type prepared out of poly-ethylene film having nominal thickness of 0.04mm ± 25% con-forming to IS No.2508/84 (Size of the bags will be decided as per the requirement of the purchaser).

kg

subject to validity of EPM Regn. certificate & VAT clearance certificate.

718/1, Bomikhal, Rasulgarh, Bhubaneswar. (Production Capacity as per DIC – 60 Ton.)

2. Orissa Polymer, Plot No.171, New I.E., Jagatpur, Cuttack. (Production Capacity as per DIC – 72,000 Kg.)

3. Konark Plastic Industries, IDCO Plot No.70, Industrial Estate, Kalunga, Rourkela, Dist. Sundargarh. (Production Capacity as per DIC – 90 M.T.)

4. Associated Plastic (P) Ltd., At. Ganeswar-pur Industrial Area, P.O. Januganj, Dist.Balasore. (Production Capacity as per DIC – 126 M.T.0

5. Auro Plastics, 145, Sector-A, Zone-a, I.E., Bhubaneswar (Production Capacity as per DIC – 65 M.T.)

6. Modern Poly Pack Industries, B-6, I.E., Balasore. (Production Capacity as per DIC – 28 M.T.)

7. Jit Pack, 65, New I.E., Jagatpur, Cuttack.

8. Polychem India, At/P.O. Khadipada, Puri-751002 (Production Capacity as per DIC – 36 M.T.)

9. Balaji Plastic, Industrial Estate, Berhampur-760008. Dist. Ganjam. (Production Capacity as per DIC – 96 M.T.)

10. Rawlley Engineers, B-5-6, I.E.,Rourkela (Production Capacity as per DIC – 200 M.T.)

11. Krishna Polymer (P) Ltd., Railway Station Road, Near Industrial Estate, Bargarh.

(Production Capacity as per DIC – 360 M.T.)

12. Arnapurna Plastics, B-9, Indl. Estate, Berhampur, Ganjam (Production Capacity as per DIC – 68 M.T.)(Valid upto 29.01.2009)

TERMS OF DELIVERY & TAXES : 1. The rate is ex-factory, exclusive of value added tax and entry tax which may be charged extra as

admissible, if any. 2. Time allowed for delivery of goodsand the delivery schedule may be mutually decided between the

rate contract holder and the indenting officer.



Period of validity


LEATHER & FOOT-WEAR ARTICLES.

a) Sergeant Boot/Ankle Derby Boot (Brown) Detail specification attached at Annexure-A.

Rate per pair

500.00

16.02.2008(E)

1. M/s. Venus Shoes &

Leather Products, Bhubaneswar.

2. M/s. Meher Shoe, Industries, Bolangir.

3. M/s. New Steps, Rourkela.

4. M/s. Premier Foot Wears,Plot No.18,N.H.5, At/P.O.- Pahal, Bhubaneswar

b) Officers & ASI Shoes (Brown) Rubber Sole. Detail specification attached at Annexure-B.

Rate per pair

368.00

16.08.2007 1. M/s. Venus Shoes & Leather Products, Bhubaneswar.

2. M/s. Meher Shoe, Industries, Bolangir.


4. P.K.Leather, Sundargarh.


41.

c) Sam brown Leather Belt made out of Katai.

Rate per pair

220.00



3. P.K.Leather, Sundargarh.


d) ASI Belt (Black & Brown) made out of Katai.

Rate per pair

98.00




e) Constable Belt (Black & Brown).

Rate per pair

91.00



3. P.K.Leather, New Colony, Rangadhipa, Sundargarh.


ANNEXURE-A

SPECIFICATION OF SURGENT BOOT (BROWN)/ANKLE BERBY BOOT. 29) SCOPE:

This specification covers the requirements of shape design, pattern and size as per the requirements of Orissa Police and the requirements of material quality and their sizes to be used in different components and manufacture in line with the similar products prescribed by Bureau of Indian Standard and other standards.

30) SHAPE, DESIGN & PATTERN:

The surgeant boot shall be made out of brown chrome upper leather fitted with 7 pairs of eyelets and cotton laces with well tanned compressed sole leather provided with full socks. The boots shall be provided with half tongue and shall be made by riveted and stitched method of construction.

31) SIZE:

As per the requirements of the purchaser.

32) MATERIALS: The surgeant boots shall be manufactured with the following materials.

b) Upper Leather: Plain chrome leather of brown colour conforming to IS:578.

c) Lining Leather: Vegetable tanned lining leather conforming to IS:3840/79 in vamp and

canvas lining at quarter conforming to IS:177. d) Socks : Chrome split leather conforming to IS:578. e) Bottom materials: Vegetable tanned compressed fuffalo (Sole and Heel) sole leather

conforming to IS:579 (Pt.I). f) Bottom Fillings: Leather currings both chrome or vegetable tanned leather g) Thread:

i) Upper closing: cotton thread, variety No.55 of IS:1720 or silk/synthetic/linen thread of

suitable quality mayo be used. • Sole stitching: linen thread 90 tex x 8 construction having breaking load 23 kg. min at

50 cm. gauge length. h) Lace: Cotton lace, length 112 cm (44”) – Breaking load 23 kg. Min. at 50 cm gauge length. i) Toe Compound : A hard setting cement or gum compound. j) Grinderies:

A) Eyelets : Brass coated steel eyelets, 7.5mm collar dia, of brown colour conforming to

IS:5041. B) Lasting Tacks – Rust proofed mild steel lasting tacks length 12±1mm & 10±1mm. C) Rivets : Spear pointed mild steel blue cut tacks length 12±1mm. D) Heel Pin : Rust proofed iron pins, size-25±1mm or spiral heel pin 32±1mm long. E) Shanks : Galvanised steel shanks, width – 12mm, min. Thickness – 1.2 to 1.3mm.

33) THICKNESS OF LEATHER COMPONENTS {SURGENT BOOT (BROWN)/ANKLE DERBY BOOTS}.

Sl. No.

Components Minimum thickness

a) Full Vamp 1.2mm b) Quarters 1.2mm c) Tongue & back strap 1.0mm d) Quarter lining 1.0mm e) Full socks 1.0mm f) Insole 3.0mm g) Middle sole 3.0mm h) Outer sole & sole piece 4.0mm

I) Top piece of heel 4.5mm j) Seat lifts & split lifts 2.6mm k) Stiffness 2.1mm l) Toe puff 1.5mm

34) MANUFACTURE:

Upper stitching – 25 to 30 stitches/cm, width of back strengthening leather - 25±1mm. Top of loop from top to back within 13mm. Quarter side stitching – three rows 2mm apart Quarter face stitching – Two rows 20mm apart Distance of top eyelets from top line of quarter - 25±1mm. Top piece of heel shall be secured within19±1mm spear pointed brass rivets Height of leg - 15±2mm for size 8, increase or decrease by 3mm from size to size. Height of heel - 30±2mm for all sizes.

ANNEXURE-B

SPECIFICATION OF OFFICERS & ASI SHOES (BROWN) : WITH RUBBER SOLE/GENTS LEATHER

SHOES (BROWN)

1. SCOPE This specification covers the requirements of shape design, pattern and size as per the requirements of Orissa Police and the requirements of material quality and their sizes to be used in different components and manufacture in line with the similar products prescribed by Bureau of Indian Standards and other Standards. 2. SHAPE, DESIGN & PATTERN

Brown officers shoe, Derby design with toe cap made out of brown chrome leather upper fitted with 5 pairs of eyelets, cotton laces and full socks, sole and heel should be made out of micro rubber sheet.

3. SIZE

As per the requirements of the purchaser. 4. MATERIALS:- The Officers & ASI shoes,brown,with rubber sole/gents leather

shoes(Brown)shall be manufactured with the following materials:-

UPPER LEATHER:- Plain chrome tanned leather of brown colour conforming to IS:578.

Lining leather:-

a) For quarter-Vegetable tanned lining leather conforming to IS:3840 b) For Vamp- Cotton drill conforming to IS:174

Bottom materials:- a) Insole & Middle Sole:-Vegetable tanned compressed sole leather conforming to

IS:579(Pt.I) b) Outer sole & Heel – Micro rubber sheet of Sam thick (NIR or trot Brand).

Full socks:-Natural split leather. Thread:-

a) Upper closing-Cotton thread mercerized, 3 ply or glazed 6 ply(Breaking load – 2 Kg. Min

at 50cm gauge length Or Silk or synthetic thread of suitable quality may be used subject to agreement between

the purchaser and supplier. Adhesives for sole & heel – Dendrite adhesives PC-65 for attaching the Mirco-rubber sheet for sole & heel.

Lace- Cotton lace 55cm. (22”) length, Minimum breaking load 23 Kg. at 18 cm. grip.

Grinderies:-

a) eyelets-Aluminium shoe eyelets, 6.3mm core dia matching to the shade of upper as per

IS:5041 b) Lasting Track-rust proofed mild steel lasting tacks, length 12±1mm & 10±1mm. c) Rivets-Spear pointed mild steel Blue cut tracks, length 12±1mm. d) Shanks-Galvanised steel shanks wideth-12mm, Min, thickness-1.2 to 1.3mm.

4.9 The compounded:-A hard setting cement or gum compound.

5. Thickness of leather compound: (Officers & ASI shoes Brown with Rubber Sole)

Sl. No. Components Minimum Thickness: a Vamp 1.2mm b Quarters 1.2mm c Toe Cap 1.2mm d Tongue & Back Strap 1.0mm e Quarter Lining 1.0mm f Full socks 1.0mm g Insole 2.6mm h Middle sole 1.1mm I Stiffeners 1.1mm j Toe Puff 1.1mm

6. Thickness of Micro Rubber sheet used in Sole & Heel – 8mm Min. 7. Manufacture:- Upper stitching – 3 to 4 stitches/cm. Height of finished heel – 25 to 28mm


• The rates are ex-factory, inclusive of cost of packing and exclusive of VAT and Orissa Entry Tax which may be charged extra, as admissible if any.

• The delivery schedule may be mutually decided between the rate contract holder and the

indenting officer.

RATE CONTRACT CIRCULAR NO. 4160 dt. 17.08.2006, 162 dt.6.1.07,2340 dt.7.4.07, 4230 dt.2.7.07



Period of validity


LEATHER PUMP BUCKET & SEAT VALVE. Leather Pump Bucket conforming to IS No.1015/1956. Size

1) 3½” 2) 3”

Leather Seat Valve conforming to IS No.1015/1956. Size

1) 3½” 2) 3”

Per each Per each

23.85 20.80 14.75 13.75

17.11.2005

1. Ambika Leather

Bucket Bhubaneswar.

42.

TERMS OF DELIVERY & TAXES : RATE CONTRACT CIRCULAR NO. 4412 dt. 18.11.2004 Description of the store item


Period of validity


43.

M. S. PANNELED DOOR & WINDOW 1. M.S. Panelled door double leaved with M.S. Frame, over all size including frame, 1980 mm H x 1070 mm W made out of the following materials conforming to relevant Indian Standard

Rate per Kg.

33.80

05.03.2008(E) (As indicated against each unit)

1. Choudhury Fabri-

cation Works, At/P.O. Bamra, Sambalpur.

2. Konark Enterprises, A-40, I.E., Cuttack-10.

3. Sri Lakshmi

Specification. Frame: 35x35x6mm M.S. Angle Shutter Stile: Top & Bottom rail 25x25x3mm M.S. Angle. Door Panel : 1.0mm C.R. Sheet Panel stiffener covering width of each leaf – 19x5mm. M.S. Flat 3 nos. on each leaf. Hinges: Size 100mm-6 nos (3 nos. on each side) bought out as per ISS. Hold fast. 35x35x6mm M.S. Angle 175mm length bifurcated at the top – 3 nos. on each side. Handle : 19x5mm M.S. Flat, fabricated-04 Nos. Aldrop : 2 Nos. bought out as per ISS Tower Bolt – 2 Nos. bought out as per ISS. Approximate Weight – 54 kg. 2. M.S. Pannelled Door Single leaved with M.S. frame, over all size including frame, 1830mm Height x 910mm width made out of following materials conforming to relevant ISS. Frame: 30x30x5mm M.S. Angle Shutter Stile: Top & Bottom rail 25x25x3mm M.S. Angle. Door Panel : 1.0mm C.R. Sheet. Panel stiffener covering width of leaf – 19x5mm. Flat 3 nos. Hinges: Size 100mm-3nos bought out as per ISS.Hold fast. 30x30x5mm M.S. Angle 150mm length bifurcated at the tip – 3 nos. on one side. Handle : 19x5mm M.S. Flat, fabricated-02Nos. Aldrop : 2 Nos. bought out as per ISS. Tower Bolt – 2 Nos. bought out as per ISS.

32.00

Industries, Kakigaon Road, Semiliguda-764036 Dist. Koraput.

4. Labanya Industries, At/P.O. Khalari, Angul759122.

5. Padma Auto Body Builders, Plot No.144-A, Zone-C, New I.E., Jagatpur, Cuttack.

6. Utkal Metal Products Pvt. Ltd., C-3, Industrial Estate, Berhampur760010, Dist. Ganjam.

7. Agarwalla Fabricators, At/P.O. Attabira, Dist. Bargarh.

8. Aroni Steel Industries, At/P.O. Khariar, Dist. Nuapada.

9. Mina Fabrication & Welding Works, Main Road, Umerkote, Nabarangpur.

10. Orissa Agrico (P) Ltd., B-9, I.E., Cuttack-10.

11. Vijay Engineering, At/P.O. Rathuna-thpur, Ward No.22, Kaiphulia, Baripada-757001, Mayurbhanj

12. Leo Engineers (P) Ltd., 93-B, New I.E., Phase-II, Jagatpur, Cuttack.

13. Kishan Udyog, Canal Avenue, Dist. Bargarh-768028.

14. Panigrahi Fabricators & Engg. Workshop, Shantipada, Near College Square, Bolangir.

15. Sreema Steel Furniture Works, Industrial Estate, Sunabeda-763001, Dist. Koraput.

16. Kalinga Industries, 11/2, I.E., Baraipali,

Approximate Weight – 36.5kg. 3. M.S. Pannelled Window double leaved with M.S. frame and grill over all size including frame, 1220mm Height x 910mm width made out of following materials conforming to relevant ISS. Frame: 35x35x6mm M.S. Angle. Shutter Stile: Top & Bottom rail 25x25x3mm M.S. Angle. Window Panel : 1.0mm C.R. Sheet. Panel stiffener covering width of each leaf – 19x5mm. M.S. Flat 2 nos. of each leaf. Hinges: Size 100mm-4nos. 2 Nos. on each side bought out of ISS. Hold fast. 35x35x6mm M.S. Angle 100mm length bifurcated tip –2 nos. on one side. Handle : 19x5mm Flat, 2 Nos. fabricated(inside). Tower Bolt – 4 Nos. bought out as per ISS. Horizontal Grills : 12 mm M.S. Round at 100mm spacing. Approximate Weight – 39kg. 4. M.S. Pannelled Window single leaved with M.S. frame and grills over all size including frame, 760mm Height x 610mm width made out of following materials conforming to relevant ISS. Frame: 30x30x5mm M.S. Angle. Shutter Stile: Top & Bottom rail 25x25x3mm M.S. Angle. Window Panel : 1.0mm C.R. Sheet. Panel stiffener covering width of each leaf – 19x5mm. M.S. Flat 1 No. Hinges: Size 100mm-2nos bought

29.10

32.90

Sambalpur-768150. 17. Samaleswari

Fabrication Work, At/P.O. Khariar, Dist. Nuapada-766107.

18. Ashutosh Steel Industries, Chandrasekhar Nagar, Dist. Bolangir.(Valid upto 29.03.2007)

19. Shiva Shankar Engg. Works & Traders, Nilakantheswar Mandir Road, Jeypore, Dist. Koraput-764003. (Valid upto 21.10.2006).

20. Hindustan Engg. & Fabrication Industries, NKT Road, Jeypore-764003, Dist. Koraput. (Valid upto 31.03.2007)

21. Sahoo Fabrication, At/P.O. Bamra, Station Basti, Sambalpur (Valid upto 15.09.2006)

22. Neelatara Fabrica-tion (Blue-Star) Fabrication Unit, Municipality Stall No.1&2, Block-3, M.G. Road, Jeypore, Koraput.(Valid upto 21.7.2007).

23. Nanda Industries, At- contractor Colony, Burla, Dist:Sambalpur (Upto 5.9.07)

24. Nanda enterprises, At- Contractor Colony, Burla, Sambalpur (Upto 5.9.07)

25. Maruti Engineering Works, At/P.O. Bell Road, Jeypore, Koraput (Upto 8.8.07)

out of ISS. Hold fast. 30x30x5mm M.S. Angle 100mm length bifurcated tip –4 (2nos. on one side.) Handle : 19x5mm M.S. Flat. fabricated 2 nos. (inside). Tower Bolt – 2Nos. bought out as per ISS. Horizontal Grills : 12 mm M.S. Round at 100mm spacing . Approximate Weight – 17.5kg.

26. General Fabrication & Engineering Works, at/p.o. – Semiliguda, Koraput (Upto 5.9.07)

TERMS OF DELIVERY & TAXES : • The rates are ex-factory, exclusive of VAT/entry tax which may be charged extra as legally

leviable if any. • Minimum time allowed for delivery of goods is as follows:

a) Order upto …Rs. 5000/- ………………… 30 days b) Orders from Rs.5000/- to Rs.10000/- .. 45 days c) Orders for every subsequent of Rs.5000/- … 15 days

• However the delivery schedule may be mutually decided between the rate contract holder and the indenting officer.

RATE CONTRACT CIRCULAR NO. 4442(200)/EPM dt. 06.09.2006, 6482 dt.7.12.06, 177 dt.6.1.07,

2092 dt.19.3.07, 2762 dt.24.4.07, 3621 dt.4.6.07, 7463 dt.15.10.07, 8807 dt.22.12.07



Period of validity


M.S.VERANDAH GRILL: M.S.Varandah Grill made out of M.S.Angle 25x25x3 mm at the Periphery & M.S.Flat 25x6 mm in the inner design conforming to IS:1977/96with hold fast made out of M.S.Angle as used in periphery as per the Design approved by the purchaser.

Rate per Kg.

36.70

01.02.2009 (Subject to validity of EP&M Regn. & VAT Clearance Certificate)

As per table below.

44.

NAME OF THE UNITS:

1. Mohanty Engg. Works, Plot No.1530, Naharkanta, Hanspal, Bhubaneswar. (Prpduction

capacity as per DIC – 60 M.T.) 2. Meera Fabriation, Near Nehrugali, Padmapur, Rajaborasamber, Bargarh (Prpduction capacity

as per DIC – 18 M.T.) 3. Agarwalla Fabricators, At/P.O. Attabira, Bargarh (Prpduction capacity as per DIC – 6 M.T.) 4. Choudhury Fabrication Works, At/P.O. Bamra, Sambalpur (Prpduction capacity as per DIC –

15 M.T.) 5. Dev Steel Industry, Plot No.4/330, Raghunathpur, Nuagaon Chhak, Bhubaneswar

(Prpduction capacity as per DIC – 8 Lakhs 6. Maa Metal Industries, At/Ganesh Bazar, Phulbani, Kandhamal (Prpduction capacity as per

DIC – 60 M.T.) 7. Sahoo Fabrication, At/P.O.-Bamra,Sambalpur (Prpduction capacity as per DIC – 10 M.T.) 8. Jena Engineering Works, Utkal ashram Road, Berhampur, Ganjam (Prpduction capacity as

per DIC – 84 M.T.) 9. Sreema Steel Furniture Works, Indl. Estate,Sunabeda,Koraput 10. Monashis Steel & Agriculture Industry, At/Bhatli Road, Baragarh (Prpduction capacity as per

DIC – 9 Ton) 11. Leo Engineering (P) Ltd., 93-B-1,New Indl. Estate,Jagatpur,Cuttack (Prpduction capacity as

per DIC – Rs.20,00,000/-)

TERMS OF DELIVERY:

1) The rate is ex-factory & exclusive of value added tax and excise duty which may be charged extra as admissible, if any.

2) Minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the indenting officer and the rate contract holder.



Period of validity


M.S.WINDOW GRILL M.S.Window grill made out of M.S. Flat conforming to IS: No.1977/1996 as per the design approved by the purchaser

Per Kg.

37.65

01.02.2009 Noted against each unit & Subject to validity of EPM registration and VAT clearance certificate.

45.

NAME OF THE R/C HOLDING UNITS

1. Agarwala Fabricators, At/P.O. Attabira, Dist. Bargarh-768027. (Annual Production Capacity – 6 MT as per DIC Regn. Certificate)

2. Orissa Agrico (P) Ltd., B-9, I.E., Cuttack-10. 3. Indravati Engineering Works, At-ITI Road, Bhawanipatna, Kalahandi. 4. Dev Steel Industry, Plot No.4/330, Raghunathpur, P.O. Samantarapur, Nuagaon Chhak,

Bhubaneswar(Annual Production Capacity – 8 lakh as per DIC Regn. Certificate) 5. Mina Fabrication & Welding Works, Main Road, Umerkote, Nawrangpur 6. Shiva Sankar Engg. & Traders, Nilakantheswar Mandir Road, P.O. Jeypore, Dist. Koraput.

(Annual Production Capacity – 120 MT as per DIC Regn. Certificate) 7. Nanda Enterprises, At/P.O.-Burla, Sambalpur(Annual Production Capacity – 18 MT as per DIC

Regn. Certificate) 8. Meera Fabrication, At-Near Nehrugali, Padmapur, Rajabarasambar, Baragarh(Annual

Production Capacity – 18 MT as per DIC Regn. Certificate) 9. Choudhury Fabrication Works, At/P.O.-Bamra, Sambalpur(Annual Production Capacity – 15

MT as per DIC Regn. Certificate) 10. Konark Enterprises, A-40,I.E.,Cuttack-10 11. Mohanty Engg. Works, Naharkanta, Hanspal, Bhubaneswar, Dist. Khurda(Annual Production

Capacity – 60 MT as per DIC Regn. Certificate) 12. Annapurna Fabricators, Main Road, Gosani Nuagaon, Berhampur(Annual Production Capacity

– 24 Ton as per DIC Regn. Certificate) 13. Nanda Industries, Contractor Colony, Burla, Sambalpur 14. Jena Engineering Works, Utkal Ashram Road, Berhampur(Annual Production Capacity – 84 MT

as per DIC Regn. Certificate) 15. Chhatia Panchayat Industries Light Engg. Co-operative Society Lt., At/P.O.-Chhatia,

Jajpur(Annual Production Capacity – 240 MT as per DIC Regn. Certificate) 16. Monashis Steel & Agriculture Industry, Bhatliroad, Baragarh(Annual Production Capacity – 9

MT as per DIC Regn. Certificate) (Valid upto 6.6.2008) 17. Maa Metal Industries, At-Ganesh bazaar, Main road, Phulabani( Valid upto 18.3.2008) 18. Sambit Enterprisers, Plot No.86,New I.E.,Jagatpur, Cuttack(Annual Production Capacity –

35,00,000/- as per DIC Regn. Certificate)( Valid upto 16.6.2008) 19. Leo Engineers (P) Ltd., 93-B, New I.E., Phase-II, Jagatpur, Cuttack. (Annual Production

Capacity – 20,00,000/- as per DIC Regn. Certificate)(Valid upto 24.6.2008) 20. Murarka Industry, Khetarajpur,Sambalpur(Annual Production Capacity – 12 MT_

TERMS OF DELIVERY & TAXES : 1. The rate is ex-factory, exclusive of VAT and excise duty which may be charged extra as admissible, if

any. 2. The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and the indenting officer. Rate Contract Circular No. 933 dt.02.02.2008, 1810 dt.1.3.2008



Period of validity


46.

MAIN SWITCH Metal clad Fuse Combination used in distribution circuit and motor circuit the rated voltages of which does not exceeding 1000 VAC 50Hz or 1200 VDC conforming to IS:4064 (Pt.I), IS:4064 (Pt-II) with utilization category AC – 22. Size: 16 Amp 240 VDP 16 Amp 415 VTP 32 Amp 240 VDP 32 Amp 415 VTP 63 Amp 415 VTP 100 Amp 415 VTP

Rate per unit

182.00 350.00 302.00 454.00

1161.00

30.8.2008

1. M/s. Laxmi Electrical

Industries, New I.E., Plot No.88, Jagatpur, Cuttack.

The enclosures shall be made of at least 1.6mm C.R. Sheet steel with adequate mechanical & electrical endurance to withstand tests as per relevant IS.

2115.00


a.The rates are ex-factory inclusive of excise duty and exclusive of Orissa Entry tax and VAT which may be charged extra, as admissible, if any.

b. The delivery schedule may be mutually decided between the rate contract holder and the indenting officer.

Rate Contract Circular No. 6636 dt.31.8.07 Description of the store item


Period of validity


47.

METAL ROLLING SHUTTER. Metal Rolling Shutter, conforming to IS:6248/71 Specifi-cation of metal Rolling shutter conforming to IS No.6248/71.

Per kg.

38.70

26.03.2009

1. Choudhury

Fabrication Works, At/P.O.- Bamara, Sambalpur ( Production capacity as per DIC 10 Ton)

2. Agarwala Fabricators, At/P.O.-Attabira, Dist. Bargarh-768027.

3. Sahoo Fabrication, At/P.O. Bamra (Station Basti), Sambalpur-768221 ( Production capacity as per DIC 10 Ton)

4. Rinki Steel Industries, Kasaipada, P.O. Rajendra College, Bolangir

5. A.H.Industries, Nayachouk, Madhupatna, Cuttack-10

Measurement of Shutter:

1. Height – Actual height of the wall opening and height of the wall covered by the bracket plate.

2. i) Breadth:- For shutter having width up to 3.5 mtrs. - Actual breadth of the wall opening

plus 130 mm. ii) For shutter having width 3.5 mtrs. and above up to 8 mtrs. – Actual breadth of the

wall opening plus 150 mm. 3. Curtain : - The thickness of the steel sheet for which the lath sections have been rolled shall be

of 0.9 mm for shutter up to 3.5 mtrs. Width and 1.25 mm thick sheet for shutter above 3.5 mtrs. Width.

4. Lock Plate: A fabricated lock plate of revetted construction made of mild steel sheet of 3.15 mm thickness reinforced with mild steel angles section of 35 x 35 x 5 mm size at the bottom shall be interlocked with bottom moth lath sections of curtain, so as to provide contract against the steel when closed. Alternatively the lock plate may also be fabricated out of unequalled mild steel angles or “TEE” section. Guide Channel Clear width of shutter Depth of the guide channel min. i) Up to 3.5 Mtrs .… 65 mm ii)3.5 mtrs and above up to 8 mtrs. …. 75 mm

5. Bracket Plates : It shall be fabricated out of mild steel sheet of 3.15 mm thickness. The

thickness and size of the bracket plate shall be proportionately higher for different height of rolling shutters.

6. Roller :- The suspension shaft of the Roller shall be made of steel conforming to heavy duty of ISS No.1161/60, specification for steel tube for structural purpose (Second Revision) and of sufficient diameter so as to resist deflection and shall not exceed 5 mm per meter width.

7. Hood Cover : Hood cover shall be made of mild steel of 0.90 mm thick. Safety divides for width up to 2.5 mtrs. properly fabricated and reinforced bottom lock plate shall be provided to give protection. For width above 2.5 mtrs. Safety device of anchoring rods or centre hasp and staple as per 7.9.1. and 7.9.2 of ISS may be provided.


• The rate is ex-factory, exclusive of value added tax and Orissa entry tax which may be charged extra as admissible, if any. a) The minimum time allowed for delivery of goods the delivery schedule may be mutually

decided between the rate contract holder and the indenting officer.



Period of validity


48.

METAL TABLE: Metal Table (office type) conforming to IS No.3498/93 with steel frame and steel top with the following specification. 1. Frame and foot rest

made out of ERW mild steel square tubes 25x25x1.25mm size.

Per each

15.05.2008(Extension vide circular No.8519 dt.11.12.07)

As per table below:

2. Top made out of 1.25mm thick C.R. Sheet.

3. Drawer box and cup boards made out of 1 mm C.R. Sheet.

4. Lock: The lock should be with 6 levers with keys of non-corrosive materials conforming to IS No.729/1979.

5. Knee space width – 560 mm min.

Size of the Table: 48”x Width 24” x 30” Height with 3 drawers. Drawer Box size: 22” x 14” x 17” Depth x width x height. 54” x 30” Depth x 30” height with 3 drawers and one cup board (Drawer box size 22”x14”x17) (Depth x width x height). Cup board wise : 22” Depth x 14” Width x 17” height. Metal Table (Office Type)

conforming to IS No. 3498/93 with steel frame and 18 mm pre-laminated board with the following specification:

1. Frame and foot rest

made out of ERW mild steel square tube 25” x 25” x 1.25 mm size.

2. Top made out of 18

mm pre-laminated board.

3. Drawer box made out

of 1 mm C. R. Sheet. 4. Lock : The lock shall

be with 6 levers with keys of non-corrosive materials conforming to IS:729/1979.

2298.00

3329.00

5. Handle: Each drawer

shall be fitted with corrosion resistance metal handle.

6. Knee space width 560

mm min. 48”Wx24”Dx30”h with 3 drawer, Drawer box size 22”x14”x17” (DxWxH). 60”Wx36”Dx30”H with 3 drawers and one cup board (Drawer box size: 22”x14”x17” (DxWxH). 72”Wx36”Dx30”h with 3 drawer and one cup board. Drawer box size : 22”x14”x17” (DxWxH) cup board size : 22”x14”x17” (DxWxH). 42”Dx24”Wx30”h with 2 drawers also with the following specification. Drawer Box size : 22”x14”x12” (DxWxH). 42”Dx24”Wx30”H without drawer and cup board and with foot rest.

2636.00

3935.00

4085.00

2331.00

966.00

TERMS OF DELIVERY & TAXES : 1. The rates are ex-factory exclusive of Value Added Tax and entry tax which may be charged extra as admissible if any. 2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and Indenting Officer. Rate Contract Circular No. 5936 dt.16.11.06, 6786 dt. 23.12.06, 432 dt.12.01.07, 956 dt.8.2.07,

2070 dt.16.3.2007,3263 dt.23.5.2007,5570 dt.13.7.07,7187 dt.29.09.07,8519 dt.11.12.07, 197 dt.7.1.08,1093 dt.7.2.08

NAME OF UNITS HOLDING R/C. 1. Konark Industries, S-11, I.E., Madhupatna, Cuttack. 2. Sri Ram Industries, A-4, I.E.,Rasulgarh, BBSR 3. Ashoka Engineering, 2nd Chandraprava Street, Berhampur. 4.Meera Industries, Hemsurpara,Angul 5. Subhasree Steel Industries, Plot No.4756/6012, VSS Nagar, Bhubaneswar. 6.Shrikrushna Steel Industries, 372, Shastrinagar, Unit-4, Bhubaneswar. 7.Shakti Enterprisers, I.E., Berhampur. 8.CEF Engineering, Plot No.17, Rasulgarh, Bhubaneswar. 9.Devi Engineering Enterprises, Mining Sqr., Keonjhar 10.Ashirbad Industries, Darakhapatna, Kalyaninagar, Cuttack. 11.Steelex Industries, A.B. Road, Nimasahi, Cuttack-1. 12.Vasavi Steels, Bhapur Bazar, Berhampur. 13.Basanti Industries, Netajingar,I.E.,Cuttack-10 14.Metalex Industries, C-14, I.E.,Cuttack-10 15.Prince Steel Industry, Plot No.179-A,Zone-B.,Mancheswar I.E.,Bhubaneswar 16.Laxmi Metal Industries, DFO Chouk,Phulbani 17.Shakti Engineering & Steel, Korian, Dhenkanal. 18.Sanjeeb Enterprises, Jagannath Road, Madhupatna, Cuttack 19.Jagannath Industries, Station Road, Baripada, Mayurbhanj. 20.Steel Tek, At. Hatatota Road, Talcher, Angul. 21.Priya Steel Industries, 288, Rasulgarh, Bhubaneswar. 22.Deluxe Steel Industries, Plot No.738,Jail Road, Jharpada, Bhubaneswar 23.Green Gospeller, Plot No. 136, I.E., Mancheswar, Bhubaneswar 24.Shree Jagannath Steel Industries,At-Bisinagar, Chhatrabazar, Canal Road, Cuttack 25. Rinki Steel Industries, At. Kasaipada, P.O. Rajendra College, Dist. Bolangir 26. Orissa Agrico Pvt. Ltd., B-9, I.E., Cuttack. 27.Mealonie Colour Chamber, Infront of Viswamber Vidyapitha, Puri. 28. Orissa Steel & Wire Products (P) Ltd., B-14, I.E., Cuttack-10. 29. Kartik Enterprises (P) Ltd., I.E., Cuttack-10. 30. Labanya Industries, At/P.O. Khalari, Dist. Angul. 31. Konark Enterprises, A-40, I.E., Cuttack-10. 32. A.H. Industries, Nayachouk, Madhupatna, Cuttack. 33. Rollex Enterprisers, I.E., Cuttack-10. 34. Sonax Industries, At. Kajidiha, Khapuria, Cuttack-10.(Upto 21.03.2008) 35.Padma Auto Body Builders, Plot No.114/A, Zone-C, New I.E., Jagatpur, Cuttack. 36.Classic Metal Products, Jagannath Road, I.E., Cuttack-10 37.Sana Iron & Steel Industries, Main Road, DNK, Malkanagiri 38.Krishna Industries, Nayachowk, Madhupatna, Cuttack. 39.Dev Steel Industries, 4/330, Raghunathpur, Nuagaon Chhak, Bhubaneswar. 40.Kalinga Equipments, New I.E., Mancheswar, Rasulgarh, Bhubaneswar 41.Maa Metal Industries, Ganesh Bazar, Main Road, Phulbani. 42.Kiran Enterprises, Gopalgaon, Chuna Bhati, Balasore. 43.Narayani Welding Workshop, I.E., Gosaninuagaon, Berhampur, Ganjam. 44.Xenium & Xenium, Uditnagar, Rourkela. 45.Krishna Steel Industries, M.G.Road, Jeypore 46.Unique Enterprises, Netajinagar(Khanagar),Cuttack-10(Upto 5.2.08) 47.M.N. Engineering, Plot No.71, Fishery Lane, Chintamaniswar, Bhubaneswar. 48.Ashutosh Industries, Plot No.211/F.,Sector-A, Zone-B, Mancheswar, I.E., Bhubaneswar 49.Vijaya Steel Industries, M.G.Road, Jeypore 50.Hesper Industries, Palasuni, Rasulgarh. 51.Raja Steel Industries, Ranipeta, Paralakhemundi, Gajapati 52.Uma steels, Aska Road, Near Gate bazaar, Berhampur 53.Bhagyalaxmi Steel Furniture Works, At. Canal Street, Gate Bazar,Berhampur

54.Pravat Steel Industries, At/P.O.-Kankadapal, Dhenkanal 55.Kalinga Industries, 11/2, I.E., Baraipali, Sambalpur 56.Sahu Steel Industries, At-Junudihi, Sambalpur Road, Bolangir. 57.Leo Engineering (P) Ltd., 93-B, New I.E., Jagatpur, Cuttack 58.Shah Industries, I.E.,Baraipali, Sambalpur 59.Sahoo Fabrication, At/P.O.-Bamra, Sambalpur 60.Swasti Furniture Industries, Plot No.72/D, Sector-A, Zone-D, I.E.,Mancheswar, Bhubaneswar(Upto 3.3.08) 61. Monashis Steel & Agriculture Industries, At-Bhatili Road, Word No.7, Dist.Bargarh 62. Mahalaxmi Steel Industries, Durgabazar, Jagatsinghpur 63.Allied Industries,B-1,I.E.,Cuttack-10 64.Sree Aurobinda Fabrication,At-Hasinpur,P.O.-Ganiganja,Via-Baripada,Bhadrak



Period of validity


49.

M. S. /G. I. PIPES, FITTINGS & FLANGES 1. G. I. Socket confor-ming

to IS No.1239 (Pt.II)/1992

15 mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 2.G.I. Tee conforming to IS No.1239 (Pt.II)/ 1992 15 mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 2. G.I. Bends confor-ming

to IS No. 1239 (Pt.II)/1992

15 mm 20mm

Rate per unit.

10.50 11.50 16.50 21.50 26.00 35.50 50.50 77.00 109.00 146.50 206.50

30.00 35.50 50.50 69.00 92.00

132.00 197.50 327.00 494.50 734.00

1120.50

30.00 46.00

05.12.2008

1. M/s. Surekha

Industries, At/P.O. Jagatpur, Cuttack-Kendrapara Road, Dist. Cuttack-754921. (Annual production capacity as reflected in the DIC PMT Regn. Certificate 7200 nos., 9600nos., 7200 nos., 7200nos.

25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 4.G.I. Screw Bass flanges

conforming to IS No. 6392/71

15 mm 20 mm 25 mm 32 mm 40 mm 50 mm 65 mm 80 mm 100mm 125mm 150mm 5.Plate flanges conforming

to IS No.6392/1971 15 mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 175mm 200mm 250mm 300mm

62.00 91.50

102.00 165.00 246.00 312.00 575.00

1146.00 1494.00

79.00 93.00 102.50 136.50 157.00 183.50 227.50 309.00 361.50 494.50 574.00

72.00 89.50 102.00 140.50 158.00 198.00 242.00 305.50 351.00 475.00 600.00 721.50 818.00 1235.50 1729.00

TERMS OF DELIVERY & TAXES : It was decided that unit who has not registered with Excise Authority will give an undertaking that they are not availing MODVAT benefits on procurement of Ra-material. If during the period of contract MODOVAT benefit is availed they will intimate to this Directorate immediately for revision of rate. In case of SSI units registered with the Excise Authority the unit concerned have to furnish a certificate from Central Excise Office that the units is not availing MODOVAT/CENVAT benefit against purchase of raw-material for manufacture of the said item covered under EP&M rate contract. After receipt of undertakings/ certificate, rate contract will be concluded either exclusive or inclusive of Excise Duty on the basis of undertaking/certificate.

The rate recommended for conclusion of rate contract are ex-factory and exclusive of value added tax. The delivery period may be mutually decided between the Indentor and rate contract holder. Rate Contract Circular No. 8454 dt.6.12.07 Description of the store item


Period of validity


MINERAL MIXTURE 1. Mineral mixture for

supplementing poultry feeds conforming to IS No.5672/92.

2. Mineral Mixture for

supplementing cattle feed conforming to IS No.1664/92 (Type-II).

Rate per Kg.

11.50

20.00

26.02.2008

1. M/S. Baal Agrovet &

Chemical Industries (P) Ltd., 41, New I.E., Jagatpur, Cuttack-21.

PARALLEL: 2. Usha Ayurvedic

Pharmacy, Meriabazar, Cuttack.


• The rates are ex-factory inclusive of cost of packing and exclusive of value added tax and entry tax which may be charged extra, as admissible, if any.

• Minimum time allowed for delivery of goods

a) Orders upto Rs.10,000/- … 7 days b) For every additional Rs.10,000/- … 7 days.

• However the delivery period may be mutually decided between the indentor and the rate

contract holder.

Rate Contract Circular No. 1279 (200) dt. 27.02.2006, 3690(200) dt. 21.07.2006. Description of the store item


Period of validity


50. 51. NITRILE RUBBER PUMP

BUCKET & SEAT VALVE

1. ISI Marked Nitrile Rubber Pump Bucket as per IS No.14104/94.

2. ISI Marked Nitrile

Rubber sealing’ Ring for India Mark-II, Deep Well Hand Pump as per IS No.14104/94.

Rate per

each

10.15

7.70

26.04.2008 (Extension vide circular No.8186 26.11.07)

1. Orissa Rubber Products,

At. Saraswatipur, O.T. Road, P.O./Dist. Balasore.


Rubber sealing’ Ring for India

Mark-III , Deep Well Hand Pump (VLOM) as per IS No.14104/94


Rubber sealing’ Ring (lower valve) as per IS No.14104/94.

5. ISI Marked Nitrile Rubber sealing’ Ring (upper valve) as per IS No.14104/94

6. ISI Marked Nitrile Rubber sealing’ Ring (Lower valve) for India Mark-III, Deep Well Hand Pump (VLOM) as per IS No.14104/94

7. ISI Marked Nitrile Rubber ‘O’ Ring for India Mark-III, Deep Well Hand Pump (VLOM) as per IS No.14104/94

5.35

6.10

2.60

5.10

2.95

TERMS OF DELIVERY & TAXES : The rates are ex-factory, inclusive of cost of packing & exclusive of Value Added Tax and Orissa Entry Tax which may be charged extra as admissible if any. The delivery schedule may be mutually decided between the rate contract holder and the Indenting Officer. Rate Contract Circular No. 5500 dt.27.10.06 Description of the store item


Period of validity


52.

NYLON SOCKS Nylon Socks, plain knitted type with reinforced heel

Rate per pair

28.50

09.08.2008(Extension vide

1. Orissa Wool Industries, B-24, I.E., Cuttack-

and toe, made out of yard nylon yarn, liner density 30 Tax, top knitted with double layer covered elastic yarn, khaki colour and free size (adults) as per approved sample of I.G. of Orissa Police, Cuttack Weight of 10 pairs of socks. 600 gm. Minimum foot length 270 ± 5mm length of socks (leg length) 320±5mm Dept of rib top portion: 50±5mm Width of foot length at centre 100±5mm

circular No.8746 dt.19.12.07)

10. (Annual Production Capacity-60,000 pairs)

TERMS OF DELIVERY & TAXES : The rate is ex-factory, inclusive of cost of packing & excuse duty but exclusive of Value Added Tax and Orissa Entry Tax which may be charged extra as admissible if any. The delivery schedule may be mutually decided between the Indenting Officer and the rate contract holding SSI unit. Rate Contract Circular No. 6201 dt.10.08.07 Description of the store item


Period of validity


OFFICE PASTE Office Paste, Type-B 300 ml. net packed in plastic container with stapper & bruch conforming to IS: No.2257/89

Per Kg. 12.25 27.11.2008 M/s. B.K.Products, SE-12, I.E., Cuttack-10( Annual production capacity Rs.3,00,000/-

TERMS OF DELIVERY & TAXES : The rate is ex-factory, inclusive of cost of packing & exclusive of Value Added Tax and Orissa Entry Tax which may be charged extra as admissible if any. The delivery schedule may be mutually decided between the Indenting Officer and the rate contract holding SSI unit. Rate Contract Circular No. 99 dt.04.01.2008 Description of the store item


Period of validity


53. 54.

ORS POWDER: ORS Powder (WHO/ Citrate formula)

20.5 gms in pack

1.82

19.02.2008 1. 1. Jagannath

Chemical & Pharmaceutical Works (P) Ltd., Nayasarak, Cuttack.

2. Monday Medicines,

Sekhbad, Jaleswar, Balasore.

3. Swaraj Chemical & Pharmaceutical Works, Plot No.21 & 22, I.E. New, Jagatpur, Cuttack.

4. Eastern Chemical Industries (P) Ltd., I.E., Cuttack-10

5. Trimurty Chemical Industries, 31, Cantonment Road, Cuttack-1(Upto 31.12.07)

6. Kingsy Pharmaceutical Works, D-216, Mancheswar, I.E., Bhubaneswar (Annual Production capacity 1.80 lakh packets)(Upto 31.12.07)





Rate Contract Circular No. 1223 dt.20.2.07,1373 dt.23.2.07, 6231 dt.13.8.07, 7162 dt.29.9.07 Description of the store item


Period of validity


55.

PAINTS: 1.Aluminium Paints IS: 2339/75

1. 4 Ltr. container 2. 20 Ltr. container.

2. Enamel Paints interior IS:133/75. White

1. 4 Ltr. container

Ltr./kg

76.00 71.00

67.17

21.10.2008

1. Rollex Paints & Chemicals, I.E., Cuttack (Sl.No. 1 to 18, 21 & 23 to 26 ( Total 24 items)

2. Garnet Paints & Chemicals, I.E., Phase-II, Jagatpur, Cuttack (From Sl.No.1 to 5, 7 to 18,

2. 20 Ltr. container

Black. Rex-oxide, Chocolate.

1. 4 Ltr. container 2. 20 Ltr. container

Other Colour:


3. Synthetic Enamel Exterior finishing IS No.2932/74. White:

1. 4 Ltr. container. 2. 20 Ltr. container.

Black, Red-oxide, Chocolate.


Other Colour:


4. Enamel Exterior finishing IS:2933/75: White:

1. 4 Ltr. container. 2. 20 Ltr. container.

Black:

1. 4 Ltr. Container 2. 20 Ltr. container

Yellow:


5. Road Marking Paint IS;164/81: Black


62.56

55.30 51.10

66.35 62.30

83.50 78.60

71.60 61.10

81.00

76.00

85.00 80.00

67.60 61.70

81.00 76.00

49.00 45.00

20, 23 to 26 (Total 22 items)

Golden Yellow:

1. 4 ltr. container 2. 20 ltr. container

White:


6. Ready-mixed paint brushing red lead non-setting, priming IS: 102/62


7. Ready mixed paint brushing, priming, plaster IS:109/68


8. Ready mixed paint brushing, gray filler for enamel for use over primer IS:110/83.


9. Ready-mixed paint air drying red-oxide zinc chrome priming IS:2074/92.


10. Ready-mixed paint brushing wood primer, pink. IS:3536/66.


11. Ready mixed paint brushing aluminium red-oxide primer IS:5660/70.

1. 4 ltr. container 2. 20 ltr. container.

12. Dry Distemper oil emulsion IS:427/68.

56.00 53.40

76.00 71.00

165.00 164.00

54.50 55.10

49.00 46.00

53.00 48.00

51.50 45.10

59.60 57.40

1. 5 kg. container 2. 20 kg. container

13. Distemper oil emulsion paint for general purpose LS: 428/69.


14. Cement paint : IS:5410/92

1. 5 kg. container 2. 20 kg. container in

drum packing. 15. Plastic emulsion paint for interior use IS:5411/74 (Pt.I)

1. Deep shade 4 ltr. container.

2. White 4 ltr. container

16. Ready mixed paint, brushing, bituminous black lead free, acid alkali, heat resistant. IS:158/81.


17. Coal Tar Black paint IS:290/69.


18. Bituminous compound for waterproofing and cooling purpose IS:1580/91.

1. 5 kg. container 2. 20 kg. container.

19. Bituminous, Black, Lead free, Acid, Alkali

28.50 22.40

30.95 25.90

23.35 21.90

92.00

90.00

31.00 28.00

27.10 25.30

18.70 17.00

water and chlorine resistant IS: 9862/81.

1. 4 ltr. container. 2. 20 ltr. container.

20. Ready mixed paint brushing and finishing exterior semi-gloss for general purpose IS:117/64. Golden Yellow :


21. Ready mixed paint, brushing and finishing semi-gloss for general purpose (red-oxide ) IS:123/62.


22. Ready mixed paint air drying semi-gloss for general purpose IS:168/75. White:


Black, Red-oxide, Chocolate.


Other colour:


23. Ready-mixed paint, brushing and finishing interior semi-gloss for general purpose IS:641/64.

1. 4 ltr. container. 2. 20 ltr. container

39.20 36.20

61.60 57.50

42.10 39.10

66.00 64.00

46.00 44.00

65.00 62.90

76.70 73.70

24. French Polish IS:348/68


25. Ready-mixed paint brushing finishing, semi-gloss for general purpose (Black) IS No.128/62.


26. Thinner for synthetic enamel.


44.20 40.00

43.10 40.80

28.50 25.50

TERMS OF DELIVERY & TAXES : 1.The rates recommended for conclusion of rate contract are ex-factory,inclusive of cost of packing. Exclusive of Excise duty, Value Added Tax and Entry Tax which may be charge extra as admissible if any. 2.Minimum time allowed for delivery of goods. The delivery schedule may be mutually decided between the rate contract holder and the Indenting Officer. Rate Contract Circular No. 7597 dt.22.10.07, 75 dt.3.1.08 Description of the store item


Period of validity


PIN INSULATOR: (11 KV & 33 KV) Porcelain Insulator for overhead power lines within a nominal voltage, greater than 1000 Volt conforming to IS No.731/77 (Pin Insulator)

1. 11 KV Pin Insulator

2. 33 KV Pin Insulator

Per each

58.00

250.00

05.01.2008(E) subject to validity of EPM Regn. Certificate and VAT clearance certificate.

1. Mayur Electro

Ceramics (P) Ltd., Pratapgarh, Via. Rairangpur, Dist. Mayurbhanj-757050

56.


• The rates are ex-factory, inclusive of cost of packing and exclusive of VAT and entry tax

which may be charged extra as admissible, if any. • The delivery schedule may be mutually decided between the R/C holder and the

indenting officers. • The rate contract holding firms shall furnish drawing and details of parameters of the

store item at the time of execution of supply order. • The rate contract holding firm shall have to get its product type tested at C.P.R.I. /N.T.H.

at an interval of 2 years.

Rate Contract Circular No. 3405(200)/EPM dt. 06.07.2006,6347 dt.20.08.07 Description of the store item


Period of validity


57.

RAIN COAT: Waterproof coat with hood (Rain Coat with hood):- Length at back 54” circumference at the bottom 64” and length of the sleeves from the middle of the neck 35” made out of rubberised double structure water proof cloth upper layer is of polyester or mercerised cloth and lower layer is thin mercerised cloth with rubber layer in between having plain cut two hip pockets 6½” square with flap 2½” deep double standup collar 3½” at the point in front and 2” in the middle at the back opening at the bottom of the back 17” long shoulder re-inforced by super impressed piece of the same material. Five buttons down the front with double flap on bottom hole side and two side loops for belt 2” wide or suitable length of the same materials used for the coat fitted with brass buckles. The double texture rubberised cloth shall conform to the IS No.6110/93.

Per each

490.00

21.11.2008

1. Kalinga Industries, Jaunliapatti, Cuttack-9.(Valid upto 21.11.2008)(Annual Production Capacity 15000 Pcs.) 2. Vishal Industries, Rovers Street,Buxibazar, Cuttack-1(Valid upto 24.7.2008)(Annual Production Capacity 9000 Nos.) 3Goenka Enterprise, Town Hall Road, Ward No.12, Holding No.336,Cuttack-9 (Valid upto 25.10.2008)(Annual Production capacity 10000 Pcs.) 4.Usha Udyog & Garments, Purushottam Complex, Meria Bazar, Cuttack-1(Valid upto 22.7.2008)(Annual Production capacity Rs.10,00,000/-) 5.Saswot Industries, Tarani Vihar, Bidanasi, Cuttack (Valid upto 8.4.2008)(Annual Production capacity Rs.25,00,000/-) 6.Sushree Garments,New Rausa Patna,Cuttack-1 (Valid upto 21.11.2008)

Hood :- 20” high, 12” width 11” width at the beck with button and button holed strap fastening at the front 4” from the button. TERMS OF DELIVERY & TAXES :

• The rate is ex-factory, exclusive of value added tax (VAT) and Orissa entry tax which may be charged extra as admissible, if any.

• Minimum time allowed for delivery of goods; i) orders upto Rs.5,000/- … 10 days, ii) for every subsequent Rs.5000/- … 5 days.

• However, the delivery schedule may be mutually decided between the rate contract holder and the indenting officer.



Period of validity


POLYETHYLENE ROTO MOULDED WATER STORAGE TANK: ISI Marked Polye-thylene Roto Moulded cylindrical Vertical Water Storage Tank conforming to IS No.12701/96. Capacity: a. 200 Ltrs. b. 500 Ltrs. c. 1000 Ltrs.

Per Ltr.

2.87

2.86

2.64

06.07.2006

1. Orissa Plastic

Processing Ltd., At. Alupur, O.T. Road, Balasore-756001.

58.

TERMS OF DELIVERY & TAXES : Rate Contract Circular No. 3643 dt. 07.07.2005


Unit Rate per unit

Period of validity


Rs. P.S.C. POLES a) 7.5 mtr. Long PSC

Pole working load 140 kg. At 600 mm

from the top with depth of planting 1500mm with earthing

arrangements conforming to IS No.1678/78 as per OSEB drawing No. 5817, IS No. 1343/60.

b) 7.5 mtr. Long PSC

Pole working load 200 kg. At 600 mm from the top with depth of planting 1500mm with earthing

arrangements conforming to IS No.1678/78 as per OSEB Drawing No. 5818 & IS No.1343/60.

a) 8 mtrs. Long PSC Pole

working load 200 kg. At 600 mm

from the top with depth of planting 1500mm with earthing

arrangements conforming to IS No.1678/78 as per OSEB Drawing No. 4.

Per each

924.00

1094.00

1209.00

07.02.2008(E)

1. Neelachal Concrete

Products (P) Ltd., Bampada, P.O. Chhanpur, Dist. Balasore-756056

2. Konark Construction & Engineers Ltd., Telengapentha, Cuttack-51

3. O.C.P.India (P) Ltd., Rasulgarh, Bhubaneswar

4. R. N. Mishra, At/P.O. Choudhury Bazar, Cuttack.

5. Orissa Concrete Industries, At/P.O. Jatni, Dist. Khurda.

6. Lite Manufacturing Pvt. Ltd., Goods Shed Road, Khajuria Road, Berhampur, Ganjam

7. Balaji PSCC Poles Industries, 14/370, Gajapati Nagar, P.O. Sainik School, BBSR

8. K.D.B.Udyog, Patharla, Govindapur, Bargarh(only 8 mtrs. Long PSC Pole)


• The rates are ex-factory, exclusive of excise duty, VAT and entry tax which may be charged extra as admissible, if any.

• Time allowed for delivery of goods: a) Orders upto 500 Poles in 45 days but not before 30 days from the date of receipt

of the order. • However the delivery schedule may be mutually decided between the rate contract

holder and the indenting officer.

Rate Contract Circular No. 3990 dt. 08.08.2006, No.4396 dt. 05.09.2006,5663 dt.4.11.06,842 dt.5.2.07,5699 dt.21.7.07



Period of validity


SOFT PARAFFIN, I.P. (WHITE)

3. 1 Kg. in Polyjar Pack.

4. 15 Kg. in Polyjar Pack

Per Kg.

90.00

1253.00

25.02.2008

• Chemie (India), I.E., Cuttack-10.

• Surgiplast (India), Berhampur.(Upto 30.06.2007)

TERMS OF DELIVERY & TAXES : 1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax which may be

charged extra as admissible if any. 2.The H&FW Deptt., Govt. of Orissa will pay 1% of rate contract rate towards transportations

charges for supply of Drugs & Medicines at different stores/medicals of the State for a period of one year from the date of issue of rate contract.


Rate Contract Circular No. 1478 dt.26.2.200



Period of validity


Stamp Pad Ink Stamp Pad Ink, violet colour, Grade-A 30 ml. net packed in plastic container with stopper conforming to IS:No.393/85

Per 30ml. bottle

6.00 27.11.2008 (Subject to the validity of EP&M Regn. Certificate & VAT Clearance Certificate)

M/s. B.K.Products, S.E.-12, I.E., Cuttack-10 (Annual Production Capacity – Rs.3,00,000/-)

60. 61.

TERMS OF DELIVERY & TAXES : 1.The rate is ex-factory,inclusive of cost of packing and exclusive of value added tax and Orissa

Entry Tax which may be charged extra as admissible if any. 2.The delivery schedule may be mutually dicided between the rate contract holder and the

indenting officer. Rate Contract Circular No. 612 dt.22.1.08

62. Description of the store

item Unit Rate per

unit Rs.

Period of validity


STEEL CHAIR SPECIFICATION FOR STEEL CHAIR: Steel Chair made out of steel square Tube, consisting of seat and back plastic woven seasoned non-teak, non-sal, hardwood such as Dhaura, Asan, Kangra, Chakunda, Kasi and Tentra frame and hand rest made of the same wood. SPECIFICATION : 1. Frame: 25x25x 1.25mm square tube. 2. Seat Size : 450 mm x 450 mm seasoned non-teak, non-sal, hardwood such as Dhaura, Kangra, Chakunda, Kasi and Tentra frame with plastic woven cane. 3. Seat height: from ground level – 450 mm. 4. Hand rest : Made out from non-teak, non-sal, hard-wood such as Dhaura, Asan, Kangra, Chakunda and Kasi height from top of seat to top of hand rest – 235 mm. 5. Back inclined backwards 5º to 10º from the vertical height having size of 450mm x 250 mm.

Per each

541.00

17.03.2009 subject to validity of EPM Regn. Certificate and VAT Clearance Certificate

As per list below.


• The rate is ex-factory, exclusive of VAT and entry tax which may be charged extra, as admissible, if any. The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and the indenting officer.

Rate Contract Circular No. 2098, dt.18.3.2008,2551 dt.4.4.2008 NAME OF R/C HOLDERS :

1. Konark Industries, SE II,I.E.,Madhupatna, Cuttack(Production capacity as per DIC – 2.00 crores)

2. A.H.Industries, Nayachouk,Madhupatna,Cuttack-10 3. Padma Auto Body Builders,Plot No.144 A, Zone-C, New I.E.,Jagatpur, Cuttack 4. Kalinga Equipments, New I.E.,Mancheswar,S-1/110 & 107,BBSR 5. Sanjeeb Enterprisers,Jagannath Road, I.E.,Cuttack-10(Production capacity as per DIC –

Rs.10,00,000/-) 6. Rollex Enterprisers,Type-II,I.E.,Cuttack-10 7. Ranjita Steelex Industry, A1, A2, I.E.,Bhubaneswar 8. Krishna Steel Industries, M.G.Road, Jeypore, Koraput(Production capacity as per DIC –1.5

M.T.) 9. Steelex Industries, A.B.Road, Neemasahi,Cuttack 10. Maa Metal Industries, Ganesh Bazar, Main Road, Phulbani(Production capacity as per DIC –

Rs.6,04,000/-) 11. Rinki Steel Industries, At-Kasaipada, P.O.-Rajendra College, Bolangir(Production capacity as

per DIC – 30 MT) 12. Vasavi Steels, Bhapur Bazar, Berhampur, Ganjam(Production capacity as per DIC –600 nos.) 13. Konark Enterprises, A-40,I.E.,Cuttack-10 14. Classic Metal Products, I.E.,Cuttack-10(Production capacity as per DIC – Rs.60,00,000/-) 15. Krishna Industries, Nayachouk,Madhupatna,Cuttack 16. Unique Enterprises, Netajinagar,Khannagar,Cuttack-10 17. Shree Krishna Steel Inds., Plot No.372,Sastrinagar,Bhubaneswar(Production capacity as per

DIC – 108 MT) 18. Ashirbad Industries,Darkhapatna,Kalayaninagar,Cuttack(Valid upto 19.10.2008) 19. M.N.Engg., Plot No.71, Fishery Lane, Chintamaniswar,Bhubaneswar(Production capacity as

per DIC – 36 MT)(Valid upto 6.6.2008) 20. Dev Steel Industry, 4/330,Raghunathpur,P.O. Samantarapur, Nuagaon Chhaka, BBSR

( Production capacity as per DIC – 8 lakhs) 21. Kiran Enterprises, At-Gopalgaon, Chunavati-Lane,Balasore ( Production capacity as per DIC

– 3 lakhs) 22. Kanika Furniture (P) Ltd., At-N.H.-5, Bampada, P.O.-Chhanapur, Kuruda, Balasore

(Production capacity as per DIC – 37 M.T.) 23. Green Gospeller,Plot No.136,Sector-A,Zone-A,I.E.,Mancheswar,Bhubaneswar 24. Raja Steel Industries, At-Ranipeta,Paralakhemundi,Gajapati 25. Jagannath Industries, Station Road, Baripada, Mayurbhanj( Production capacity as per DIC –

19.62 MT) 26. Devi Engineering enterprises, Mining Square, Keonjhar (Production capacity as per DIC –300

M.T.) 27. Meera Industries, Hemsurpara, Angul (Production capacity as per DIC – 600 Nos.) 28. Ashutosh Industries, Plot No.211,Mancheswar I.E.,Bhubaneswar ( Production capacity as per

DIC – 1,30 crores) 29. Steel Tek,At-Hatatota Road, Talcher,Angul ( Production capacity as per DIC – 30 lakhs) 30. Ashirwar Engineering & Electricals, I.E.,Cuttack-10 31. Aroni Steel Industries, At/P.O.-Khariar,Nuapada ( Production capacity as per DIC – 1000

nos) 32. Delux Steel Industries, Plot No.738, Jail Road, Jharpada, Bhubaneswar (Production capacity

as per DIC – 42 nos.) 33. Narayani Welding Workshop, Gosani Nuagaon, Berhampur (Production capacity as per DIC –

44 M.T.) 34. Ashoka Engineering Works, 2nd Chandra Prava street,Berhampur

35. Leo Engineers(P)Ltd.,93/B.,New I.E.,Phase-II,Jagatpur,Cuttack(Valid upto 24.6.2008) 36. Umi Industries, Plot No.4741, Badagada, Bhubaneswar (Production capacity as per DIC –12

M.T.)(Valid upto 5.5.2008) 37. Radha Mohan Ray, Agricultural Equipments,I.E.,Cuttack-10(Valid upto 7.5.2008) 38. Priya Steel Industries, Plot No.228,Rasulgarh,Bhubaneswar(Valid upto 5.2.2009)



Period of validity


63.

STEEL DOOR & WINDOW FRAME 1. Steel angle iron door frame as per the drawing No.379/84 of B.D.A., BBSR Steel Angle Iron frame shall be manufactured from standard rolled steel angle section of 40mmx40mmx6mm size with corners of the frame duly metered and electrically welded with fish tail hold fasts made out of M.S. flat size 200mm x 50mm x 30mm wide and 5mm thick welded to the frame at the rate of 6 nos. per frame with 10mm dia M.S. round bar to be welded at the bottom at the bay with M.S. Hinges of size 10mm 14SWG thick at the rate of 3 nos. and 50mm size one no. for single leaf shutter aldrop staple and tower bolt hinges duly welded to the frame with one coat of anti-corrosive red-oxide zinc chrome primer. 2. Steel Angle iron window frame with MS Rod Flat grating as per drawing No.379/84 of BDA, BBSR. Steel angle iron window frame with M.S. rod flat grating manufactured from standard rolled steel angle section 40mm x 40mm x 6mm with corners of the frame duly metered and

Per Kg.

40.00

38.00

14.03.2009 subject to validity of EP&M Regn. certificate.

1. Agarwalla Fabricators,

At/P.O. Attabira, Dist. Bargarh-768027(Production capacity-18MT).

2. Nanda Enterprises, Contractor Colony, Burla, Sambalpur (Production capacity 18 MT)

3. Nanda Industries, Contractor Colony, Burla, Sambalpur ( Production capacity 10 MT)

4. Kaling Industries, 11/2, I.E., Baraipali, Sambalpur

5. Murarka Industry, Khetrarajpur, Sambalpur ( Production Capacity 12 MT)

6. Meera Fabrication, Near Nehrugali, Padmapur, Rajberasambar, Bargarh

7. Tarini Enterprisers, At/P.O. Gopalpur, Cuttack (Production Capacity Rs.5,00,000/-)

electrically welded with fish tail hold fasts made out of MS flat of size 200mm x 50mm x 30mm wide and thick at the rate of 4 nos. per frame with MS hinges of size 75mm and 14 SWG thick at the rate of 3 nos. for each single leaf shutter tower bolt ring and steel grating made of MS rod 16mm dia supported with 19mmx5mm MS flat properly welded to the window frame with one coat of anti-corrosive red oxide zinc chrome primer. 3. Steel angle iron window frame with MS grill as per drawing No.379/84 of BDA, BBSR. Steel angle iron window frame MS grill manufactured from standard rolled steel angle section 40mm x 40 mm x 6mm corner of the same duly metered and electrically welded with fish tail hold flats made out of MS flat of size 200mm x 50mm x 30mm wide and 5mm thick at the rate of 4 nos. per frame with MS hinges of sizes 75mm and 14 SWG thick at the rate of 3 nos. for each single leaf shutter tower bolt, ring and MS grills made out of 19mmx 5mm flats properly welded to window frame with one coat of anti-corrosive red oxide zinc chrome primer.

38.00

TERMS OF DELIVERY & TAXES : 1. The rate are ex-factory and exclusive of VAT and Orissa entry tax which may be charged extra, as

legally admissible, if any. 2. The delivery schedule may be mutually decided between the rate contract holders and the indenting

officer.

Rate Contract Circular No. 2026 dt. 15.03.2008 Description of the store item


Period of validity


STEEL SHELVING CABINET: A) Steel shelving cabinet made out of 1mm C.R. Sheet with adjustable shelves door handles, six lever locks with 3 way bolting system, one coat of primer and 2 coats of enamel paints conforming to IS No.3312/84 without stove enameling of the components. Size :

1. 78”x36”19” 2. 52”x30”x17”

Per each

5453.00 3402.00

19.05.2008(Extenstion vide circular No.8519 dt.11.12.07)

TERMS OF DELIVERY & TAXES : The rates are ex-factory and exclusive of Value Added Tax & Entry Tax which may be charged extra as admissible if any. Terms of Delivery:-The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and the Indenting Officer. Rate Contract Circular No. 6008 dt.20.11.06, 6682 dt.18.12.2006,423 dt.12.1.07,949 dt.8.2.07,2050

dt.16.3.07,3142 dt.17.5.07,3989 dt.21.6.07, 6000 dt.4.8.07, 7177 dt.29.9.07, 8519 dt,11.12.07, 8786 dt.22.12.07,1086 dt.07.02.2008

64.

NAME OF THE R/C HOLDING UNITS: 1.Konark Industries,SE-11,I.E.,Madhupatna, Cuttack-10(Upto 19.5.2008) 2.Ashoka Engineering, Chandraprava Street, Berhampur(Upto 19.5.2008) 3.Shakti Enterprisers, I.E.,Berhampur(Upto 19.5.2008) 4.Meera Industries, Hamsurpada, Angul(Upto 19.5.2008) 5.Mealonie Colour Chamber,Infront of Viswambar Vidyapitha, Puri(Upto 19.5.2008) 6.Krishna steel Industries,M.G.Road,Jeypore(Upto 19.5.2008) 7.Grand Fabricators,Plot No.2894,Jhaunbania,Lewis Road,BBSR(Upto 19.5.2008) 8.Rinki Steel Industries,At-Kasaipada,P.O.-Rajendra College,Bolangir(Upto 19.5.2008) 9.Shakti Engg. & Steel,at/P.O.-Korian,Dist:Dhenkanal(Upto 19.5.2008) 10.Shree Jagannath Steel Industries,At-Bisinagar,Chhatrabazar,Canal Road,P.O.-College (Upto 19.5.2008) 11.Choudhury Fabrication Works,At/P.O.-Bamra,Sambalpur(Upto 19.5.2008) 12.Jagannath Industries,Station Road,Baripada(Upto 19.5.2008) 13.Laxmi Metal Industry,D.F.O.Chouk,Main Road,Phulbani(Upto 19.5.2008) 14.Shree Krushna Steels Industries,Plot No.372,Shastrinagar,Unit-IV,BBSR(Upto 19.5.2008) 15.Deluxe steel Industries,Plot No.738,Jail Road, Jharpada,BBSR(Upto 19.5.2008)

16.Basanti Industries, At/P.O.-Khannagar,Cuttack(Upto 19.5.2008) 17.Narayani Welding workshop,Gosaninuagoan,Berhampur(Upto 19.5.2008) 18.Dev Steel Industries,4/330,Raghunathpur,P.O.-Samantarapur,Nuagaon Chhak,BBSR(Upto 19.5.2008) 19.Steel Tek,At/Ratatota Road,Angul(Upto 19.5.2008) 20.Subhashree Steel Industries,Plot No.4756/6092,VSS Nagar,BBSR(Upto 19.5.2008) 21.Pravat Steel Industries,At/P.O.-Kankadapal, Dist:Dhenkanal(Upto 19.5.2008) 22.Devi Engg. Enterprises, At-Mining Sqr., Keonjhar(Upto 19.5.2008) 23.Green gospeller, Plot No.136,Sec-a,zone-A,I.E.,Mancheswar,BBSR(Upto 19.5.2008) 24.Vasavi Steels,Bhapur Bazar,Khajastreet,Berhampur(Upto 19.5.2008) 25.Steelex Industries,A.B.Road,Neemasahi,Cuttack(Upto 19.5.2008) 26.Classic Metal Products,Jagannath Road,I.E.,Madhupatna,Cuttack-10(Upto 19.5.2008) 27.Rollex Enterprisers,Type-II-12,I.E.,CTC-10(Upto 19.5.2008) 28.Padma Auto Body Builders,Plot No.144-A,Zone-C,New I.E.,Jagatpur,CTC(Upto 19.5.2008) 29.Labanya Industries,At/P.O.-Khalari,Angul(Upto 19.5.2008) 30.Krishna Industries,Nayachouk,Madhupatna,CTC-10(Upto 19.5.2008) 31.Orissa Steel & Wire Products(P)Ltd.,B-14,I.E.,CTC-10(Upto 19.5.2008) 32.A.H.Industries,Nayachouk,Madhupatna,CTC-10(Upto 19.5.2008) 33.Kartik enterprisers(P)Ltd.,I.E.,CTC-10(Upto 19.5.2008) 34.Metalex Industries,C-4,I.E.,CTC-10(Upto 19.5.2008) 35.Priya Steel Industries,Plot No.228,Rasulgarh,BBSR(Upto 19.5.2008) 36.Ashirbad Industries,Darkhapatna,Kalyaninagar,CTC(Upto 19.5.2008) 37.CEF Engineering,Plot No.17,Rasulgarh,BBSR(Upto 19.5.2008) 38.Sana iron & Steel Industries,Main Road,Malkanagiri(Upto 19.5.2008) 39.Swastik Engg. Works,At/P.O.-Ujalpur,sundergarh(Upto 19.5.2008) 40.Ranjita Steelex Industry,A1/42,I.E.,BBSR(Upto 19.5.2008) 41.Kiran enterprisers,Gopalgaon,Chunavati lane,Balasore(Upto 19.5.2008) 42.Tarini enterprisers,At/P.O.-Gopalpur,CTC(Upto 30.3.2008) 43.Sheo Industries,C-8,I.E.,CTC-10(Upto 19.5.2008) 44.Sanjeeb Enterprisers,Jagannath Road,Mahdupatna,CTC-10(Upto 19.5.2008) 45.Xenium & Xenium,Uditnagar,Rourkela,sundergarh(Upto 19.5.2008) 46.Sonax Industries,At-Kajidiha,Khapuria,CTC-10(Upto 19.5.2008) 47.Konark Enterprises,A/40,I.E.,CTC-10(Upto 19.5.2008) 48.Sreema Steel Furniture Works,I.E.,sunabeda(Upto 19.5.2008) 49.Kalinga Equipments,S-1/110-107,New I.E.,Mancheswar,BBSR(Upto 19.5.2008) 50.Prince Steel Industry,Plot No.179/A,Zone-B,Mancheswar I.E.,BBSR(Upto 19.5.2008) 51. Umi Industries,Plot No.4741,Badagada,BBSR(Upto 5.5.2008) 52. Maa Metal Industries,Ganesh bazaar,Main road,Phulbani(Upto 19.5.2008) 53.Sri Ram Industries,A-4,I.E.,Rasulgarh,BBSR(Upto 19.5.2008) 54. Durga Steel,At/P.O.-Banarpal,Angul(Upto 19.5.2008) 55. Unique Enterprises,At/P.O.-Netajinagar,Khananagar,CTC(Upto dt.05.02.08) 56.Ashutosh Steel Industries,Chandrasekharnagar,Bolangir(Upto 29.3.08) 57.M.N.Engineering,Plot No.71,Fishery Lane,Chintamaniswar,BBSR(Upto 19.5.2008) 58.Sri Aurobindo Fabrication,At/Hasinpur,P.O.-Ganiganja,Via-Barapada,Bhadrak(Upto 19.5.2008) 59.Ashutosh Industries, Plot No.56,Sector-A,Zone-D,Mancheswar,I.E.,BBSR (Upto 19.5.2008) 60.Vijay steel Industries, M.G.Road, Jeypore(Upto 19.5.2008) 61.Maa Tankapani Engineering Works, Tankapani Road, Badagada, Plot No.4241, Bhubaneswar (Upto 19.5.2008) 62.Thakur Enterprises,Junuspatra College Square, Cuttack(Upto 19.5.2008) 63Shri Manasa Steel Industries, R.K.Nagar, Rayagada (Valid upto 19.5.08) 64. Hesper Industry,Plot No.916/6431,Palasuni,Rasulgarh,BBSR(Valid upto 19.5.08) 65.Raja Steel Industries, Ranipeta,Paralakhemundi,Gajapati(Valid upto 19.5.08) 66.Uma Steels, Aska Road, Near Gate Bazar, Berhampur(Valid upto 19.5.08)

67.Bhagyalaxmi Steel Furniture Works, At-Canal Street, Ist Military Lane, Gate Bazar, Berhampur(Valid upto 19.5.08) 68.Kalinga Industries, 11/2, Baraipali,Sambalpur(Valid upto 19.5.08) 69.Sahu Steel Industries, At-Junadihi, Sambalpur Road, Bolangir(Valid upto 19.5.08) 70. Leo Engineers (P) Ltd., New I.E., Jagatpur, Cuttack(Valid upto 19.5.08) 71. Shah Industries,I.E.,Baraipali,Sambalpur(Valid upto 19.5.08) 72.Sahoo Fabrication,At/P.O.-Bamra,Sambalpur(Valid upto 19.5.08) 73.Swasti Furniture Industries,Plot No.72/D,Sector-A,Zone-D,I.E.,Mancheswar,BBSR(Valid upto 3.3.08) 74. Sahoo Engineering Works, At-Haridabadi,P.O.-Daspali,Dist:Nayagarh-84(Upto 12.4.08) 75.Ashutosh Steel Inds., Chandrasekhar Nagar, Bolangir(Upto 21.3.08) 76. Monashis Steel & Agriculture Industries, At-Bhatli road, Ward No.7,Baragarh(Upto 21.3.08) 77.Radha Mohan Ray Agricultural Equipments,At-C-16,I.E.,Kajidiha Madhupatna,Cuttack(Upto 7.5.2008) 78.Mohalaxmi Steel Inds., Durgabazar, Jagatsinghpur(Upto 19.5.2008) 79.Shivasakti Industries, Gulipatra, Umerkote, Nabarangpur(Upto 19.5.2008) 80.Allied Industries, B-1, I.E., Cuttack-10(Upto 19.5.2008)



Period of validity


STEEL TRUSS ANGULAR & PURLINS (A) Angular Steel Truss Revetted welded type including bottom runner ties made out of M.S.Angle but excluding purlins. Size-75x75x6 mm 55x65x6 mm 50x50x6 mm (B)Purlins made out of M.S.Angles (C)Purlins made out of M.S.Channels

Rate per

MT

34,090.00

31,312.00

31,483.00

14.03.2009 (Subject to validity of EP&M regn. Certificate & VAT Clearance Certificate)

See table below

65.


1.The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged extra as admissible, if any.

2.The minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the indenting officer and the contractor.


NAME OF THE UNITS HOLDING R/C. 1.Shiva Sankar Engg. Works & Traders, Nilakantheswar Mandir Road, At/P.O.- Jeypore, Koraput(Production Capacity 120 MT) 2.General Fabrication & engineering Works, At/P.O.- Semiliguda,Koraput(Production capacity 60 MT) 3.Nanda Industries, Contractor Colony, P.O. Burla, Sambalpur (Production capacity Rs.20,00,000/-) 4.Choudhury Fabriocation Works, at/P.O. Bamra, Sambalpur(Production capacity 20MT)

5.Kalinga Industries, Baraipali, Sambalpur 6.Neeltara Fabrication Unit, M.G. Road, Jeypore, Koraput.(Production capacity 60 MT) 7. Mina Fabrication & Welding Works, Mian Road, Umerkote, Dist.Nabarangpur. 8.Agarwalla Fabricators, At/P.O. Attabira, Bargarh.(Production capacity 12 MT) 9.Sreema Steel Furniture Works, I.E.,Sunabeda, Koraput 10.Indravati Engineering Works, ITI Road, Bhawanipatna, Kalahandi 11.Nanda Enterprises, Contractor colony, Burla, Sambalpur(Production capacity Rs.10,00,000/-) 12Shri Laxmi Industries, Kakigaon Road, Semiliguda, Koraput.(Production capacity 143 MT) 13.Sahoo Fabrication,At/P.O.-Bamra,Stationbasti,Sambalpur(Production capacity 100MT)(valid upto 08.04.2008) 14.A.K.Steel Industries, At/P.O.Rangamatiguda, Dist. Nabarangpur.(Production capacity 60 MT) (valid upto 15.09.2008) 15.Hindustan Engg. & Fabrication Industries, NKT Road, Jeypore, Koraput.(Production capacity 180 MT)(valid upto 31.03.2008)



Period of validity


STEEL WINDOW: Steel Window (Fixed type) with fixture-without glass confor-ming to IS:No. 1038/83 Steel Window (Openable) type with-out fixture fittings and glasses conforming to IS:1038/83

Rate per Kg.

44.80

47.80

26.03.2009 (Subject to validity of EP&M Regn certificate and VAT clearance certificate.

1. Nanda Enterprises,

Contractor Colony, P.O.-Burla, Sambalpur

2. Aggrwala Fabricators, At5/P.O.- Attabira, Baragarh

66.


• The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged extra, as admissible, if any.

• Minimum time allowed for delivery of goods and the delivery schedule may be mutually decided between the rate contract holder and the indenting officer.




Period of validity


SUBMERSIBLE PUMP: Submersible Pump with squirrel cage induction type, submersible electric motor to run on 3 phase line voltage ranging from 320V to 450V conforming to IS:8034/89 with following specification:

25.12.2007(E)

1. M/s. Anupama

Industries, Plot No.738, Rasulgarh, Bhubaneswar-10

67.

Sl. Model H.P. St Outlet Head range Discharge Rate per

No. age

(size mm)

mtr. L.P.M. each Ex-factory

1 2 3 4 5 6 7 8 01 D6L 54/4 6 4 75 20 to 36 400 to 700 20,789.00 02 D6L 45/8 10 8 75 33 to 73 300 to 600 25,512.00 03 D6L 63/8 13 8 75 45 to 70 500 to 800 35,571.00 04 D6l 72/4 8 4 75 24 to 38 500 to 950 20,818.00 05 D6L 72/5 11 5 75 30 to 48 500 to 950 24,037.00 06 D6L 54/10 14 10 75 48 to 93 400 to 700 34,630.00 07 D6L 72/10 21 10 75 60 to 94 500 to 950 36,057.00 08 D6L 81/7 20 7 75 36 to 63 700 to 1300 28,042.00 09 D8L 504/2 10-5 2 125 24 to 43 500 to 1100 25,249.00 10 D8L 603/2 12-5 2 125 25 to 46 600 to 1300 31,503.00 11 D8L 702/6 42 6 125 45 to 96 1000 to 2800 50,871.00 12 D6H 09/7 3 HP 7 50 47 to 76 170 to 67 17,472.00 13 D6H 27/5 5 HP 5 50 38 to 59 320 to 100 18,036.00 14 D6H 9/5 2 HP 5 32 30 to 54 155 to 110 12,193.00 15 D6H 9/3 1 Single 3 25 20 to 35 145 to 110 12,809.00 16 D6L 45/6 7.5 6 80 25 to 55 600 to 300 22,646.00


1) The rates are ex-factory and exclusive of VAT and entry tax which may be charged extra, as admissible, if any.

2) The impeller used in submersible pump should be made of bronze/ stainless materials.

3) The manufacturer shall furnish guarantee and after sales service including replacement

at free of cost for 15 (fifteen) months from the date of supply or 12 (twelve) months from the date of installation.

4) The indenting officer will pay the testing charges extra on production of test certificate

along with money receipt towards payment of testing fees for each pump set tested, if the indenting officer orders for testing of pump set by any testing agencies/ laboratories.

5) The delivery schedule will be mutually decided by the indentor and the supplier.

Rate Contract Circular No. 6752 dt. 26.12.2005,942 dt.8.2.07, 5477 dt.10.7.07 Description of the store item


Period of validity


68.

SURGICAL DRESSING Surgical Dressings: (Gauze & Bandage) Handloom cotton bandage cloth, bleached non-sterilised woven in plain weave with 20s count yarn in warp way and 20s count yarn in weft way with well

Sqr. Mtr.

9.95

29.02.2008

1.Maa Durga Handloom Industries, Tirigia. 2.Biraja Surgical Industries, Nuagarh, Telengapentha, Cuttack-51. 3.Singhanath handloom, Gopinathpur, Baramba,

formed selvage, ends 150 threads/dm. min. and pick 85 thread/dm. min. mass-57± 5g/m2 conforming to IS: 863/ 1988. Than size – 16.5 mtrs x 90 cm.

Cuttack 4.Mama Surgicals, Nuapatna, Cuttack. 5. Shyamakali Weaving Factory, Baramba,Gopinathpur, Cuttack. 6. Indian Handlooms, Champeidwar, Ragadipada, Cuttack 7.Durga Madhab Village Handloom Industries, At. Dandasahi, P.O. Rajranpur, Dist. Nayagarh 8.Bijoy Surgicals & Chemicals, Jagatpur, Cuttack 9. Chemie (India), Cuttack-10.Shivasakti Surgicals, Tigiria, Cuttack. 11. Smart Surgicals, At. Gopinathpur, P.O. Singhanath Pitha, Via. Badamba, Dist. Cuttack. 12.Surgiplast India, Station Road, Berhampur. 13.Satyabadi Gauge and Bandage, Nuapatna, Tigiria, Cuttack 14.Gayatri Bandage, Jajpur 15.Debashisa Gauge & Bandage Enterprises, Dhenkanal 16.Lakshmipati Bandage & Gauze, Gajapati. 17.JBS Products, I.E., Old Jagannath Road, Madhupatna, Cuttack-10(upto 31.12.07) 18.Biraja Surgical Industries, Padmanav Nagar, Brahmanigram, Cuttack 19. Bijoy Surgicals & Chemicals, Plot No.120, Phase-II, New I.E., Jagatpur, Cuttack-21 (Upto 31.12.07) 20.Subham Handloom & Surgicals, At/P.O.- Nuapatna, P.S.-Tigiria, Cuttack-35 21.Subham Medicare, Plot No.82, Patrapada, BBSR 22.Das & Sons Gauze &

Handloom Cotton gauge, bleached, absorbent, non-sterilized, woven in plain weave with 26s count yarns, ends 75 threads/dm. min. and picks 55 threads/dm. min. Mass 30 ± 5 g/m2 conforming to IS : 758/88. Than Size : 16.5 mtrs. x 60 cm.

5.64

Bandage, At/P.O.- Nuapatana, Block-Tigiria, Dist:Cuttack-754035 1.Maa Durga Handloom Industries, Tirigia. 2.Biraja Surgical Industries, Nuagarh, Telengapentha, Cuttack-51. 3.Singhanath handloom, Gopinathpur, Baramba, Cuttack 4.Mama Surgicals, Nuapatna, Cuttack. 5. Shyamakali Weaving Factory, Baramba,Gopinathpur, Cuttack. 6. Indian Handlooms, Champeidwar, Ragadipada, Cuttack 7.Durga Madhab Village Handloom Industries, At. Dandasahi, P.O. Rajranpur, Dist. Nayagarh 8.Bijoy Surgicals & Chemicals, Jagatpur, Cuttack 9. Chemie (India), Cuttack-10.Shivasakti Surgicals, Tigiria, Cuttack. 11. Smart Surgicals, At. Gopinathpur, P.O. Singhanath Pitha, Via. Badamba, Dist. Cuttack. 12.Surgiplast India, Station Road, Berhampur. 13.Satyabadi Gauge and Bandage, Nuapatna, Tigiria, Cuttack 14.Gayatri Bandage, Jajpur 15.Debashisa Gauge & Bandage Enterprises, Dhenkanal 16.Lakshmipati Bandage & Gauze, Gajapati. 17.JBS Products, I.E., Old Jagannath Road, Madhupatna, Cuttack-10(upto 31.12.07) 18.Biraja Surgical Industries, Padmanav

Handloom cotton cloth for plaster of paris bandage variety-I, bleached, woven in plain weave with 30s count yearn ends 130 threads/dm. min. and picks 75 threads/dm,. min. Mass 40 g/m2 conforming to IS 6237/71. Than Size : 16.5 mtrs. x 90 cm. Handloom cotton gauge

7.96

Nagar, Brahmanigram, Cuttack 19.Bijoy Surgicals & Chemicals, Plot No.120, Phase-II, New I.E., Jagatpur, Cuttack-21 (Upto 31.12.07) 20.Subham Handloom & Surgicals, At/P.O.- Nuapatna, P.S.-Tigiria, Cuttack-35 21.M/s. Subham Medicare, Plot No.82, Patrapada, BBSR 22. Das & Sons Gauze & Bandage, At/P.O.- Nuapatana, Block-Tigiria, Dist:Cuttack-754035 1.Maa Durga Handloom Industries, Tirigia. 2.Biraja Surgical Industries, Nuagarh, Telengapentha, Cuttack-51. 3.Singhanath handloom, Gopinathpur, Baramba, Cuttack 4.Mama Surgicals, Nuapatna, Cuttack. 5.Chemie (India), Cuttack-10 6.Smart Surgicals, At. Gopinathpur, P.O. Singhanath Pitha, Via. Badamba, Dist. Cuttack. 7.Surgiplast India, Station Road, Berhampur. 8.JBS Products, I.E., Old Jagannath Road, Madhupatna, Cuttack-10(upto 31.12.07) 9.Biraja Surgical Industries, Padmanav Nagar, Brahmanigram, Cuttack 10. Bijoy Surgicals & Chemicals, Plot No.120, Phase-II, New I.E., Jagatpur, Cuttack-21 (Upto 31.12.07) 11. Subham Handloom & Surgicals, At/P.O.- Nuapatna, P.S.-Tigiria, Cuttack-35

roll bleached absorbent non-sterilised, woven in plain weave with 26s count yarns, ends 75 threads/dm. min. and picks 55 threads/dm. min. Mass : 30 ± 5 g/m2 conforming to IS:758/88 Roll size : 3.0 mtr. x 60 cm.

Handloom cotton bandage

5.80

1.Maa Durga Handloom Industries, Tirigia. 2.Biraja Surgical Industries, Nuagarh, Telengapentha, Cuttack-51. 3.Singhanath handloom, Gopinathpur, Baramba, Cuttack 4.Mama Surgicals, Nuapatna, Cuttack. 5. Shyamakali Weaving Factory, Baramba,Gopinathpur, Cuttack. 6. Indian Handlooms, Champeidwar, Ragadipada, Cuttack 7.Durga Madhab Village Handloom Industries, At. Dandasahi, P.O. Rajranpur, Dist. Nayagarh 8.Bijoy Surgicals & Chemicals, Jagatpur, Cuttack 9. Chemie (India), Cuttack-10.Shivasakti Surgicals, Tigiria, Cuttack. 11. Smart Surgicals, At. Gopinathpur, P.O. Singhanath Pitha, Via. Badamba, Dist. Cuttack. 12.Surgiplast India, Station Road, Berhampur. 13.Satyabadi Gauge and Bandage, Nuapatna, Tigiria, Cuttack 14.Debashisa Gauge & Bandage Enterprises, Dhenkanal 15.Lakshmipati Bandage & Gauze, Gajapati. 16.JBS Products, I.E., Old Jagannath Road, Madhupatna, Cuttack-10(upto 31.12.07) 17.Biraja Surgical Industries, Padmanav Nagar, Brahmanigram, Cuttack 18.Bijoy Surgicals & Chemicals, Plot No.120, Phase-II, New I.E., Jagatpur,

cloth, bleached, non-sterilized woven in plain weave with 26s count yarns in warp way and 20s count yarn in weft way, ends 150 threads per dm. Min. and picks 85 threads dm. Min. Mass : 57 ± 5 g/m2 conforming to IS: 863/88 per packet consisting of 12 (twelve) rolls. Size of each Roll : 4.0 mtr x 60 cm.

11.22

Cuttack-21 (Upto 31.12.07) 19. Subham Handloom & Surgicals, At/P.O.- Nuapatna, P.S.-Tigiria, Cuttack-35 1.Maa Durga Handloom Industries, Tirigia. 2.Biraja Surgical Industries, Nuagarh, Telengapentha, Cuttack-51. 3.Singhanath handloom, Gopinathpur, Baramba, Cuttack 4.Mama Surgicals, Nuapatna, Cuttack. 5. Shyamakali Weaving Factory, Baramba,Gopinathpur, Cuttack. 6. Indian Handlooms, Champeidwar, Ragadipada, Cuttack 7.Durga Madhab Village Handloom Industries, At. Dandasahi, P.O. Rajranpur, Dist. Nayagarh 8.Bijoy Surgicals & Chemicals, Jagatpur, Cuttack 9. Chemie (India), Cuttack-10.Shivasakti Surgicals, Tigiria, Cuttack. 11. Smart Surgicals, At. Gopinathpur, P.O. Singhanath Pitha, Via. Badamba, Dist. Cuttack. 12.Surgiplast India, Station Road, Berhampur. 13.Satyabadi Gauge and Bandage, Nuapatna, Tigiria, Cuttack 14.Gayatri Bandage, Jajpur 15.Debashisa Gauge & Bandage Enterprises, Dhenkanal 16.Lakshmipati Bandage & Gauze, Gajapati. 17.JBS Products, I.E., Old Jagannath Road, Madhupatna, Cuttack-10(upto 31.12.07)

18.Biraja Surgical Industries, Padmanav Nagar, Brahmanigram, Cuttack 19.Bijoy Surgicals & Chemicals, Plot No.120, Phase-II, New I.E., Jagatpur, Cuttack-21 (Upto 31.12.07) 20.Subham Handloom & Surgicals, At/P.O.- Nuapatna, P.S.-Tigiria, Cuttack-35


1.The rates are ex-factory,inclusive of cost of packing and exclusive of value added tax which may be charged extra as admissible if any.



Rate Contract Circular No.1834 dt.1.3.07,3270 dt.23.5.07,5544 dt.12.7.07,6271 dt.17.8.07, 6278

dt.17.08.07,7414 dt.11.10.07,8144 dt.22.11.07, 8990 dt.31.12.07,27 dt.2.1.08, 34 dt.2.1.08, 668 dt.24.1.08,711 dt.25.1.08



Period of validity


69.

TUBULAR TRUSS & PURLINS Mild steel tubular trusses made out of ERW Tubes, grade Y&T 210 Conforming to IS No.1161/79 (3rd Revision) duly painted with red-oxide primer. The detailed material composition is as follows:

a) M.S.Pipe (ERW) 60.3mm OD -771.74kg.

b) M.S. Pipe (ERW) 48.3mm O.D-131.59kg

c) MS Plate 6mm-86.087kg.

d) M.S. plate 12 mm – 11.10- kg

e) M.S. Electrodes 4mm – 156 Nos.

f) Oxygen Gas 1/6

Rate per MT

42,478.00

02.03.2009 subject to validity of EPM Regn. Certificate and VAT clearance Certificate.

1.M/s. Nanda Enterprises, At/P.O.- Burla, Sambalpur (Annual Production capacity – Rs.10,00,000/-

Cyl. g) D.A. Gas – 1/12 cyl h) Red oxide primer –

1.75 ltr. Mild Steel Tubular Purlins with runners brasing for tubular trusses made out of ERW tubes, Grade YST 210 conforming to ISS No.1161/79 (3rd Revision) duly painted with Red-oxide primer.

Rate per MT

42,228.00


• The rates are ex-factory, exclusive of VAT and Orissa entry tax which may be charged extra as admissible, if any.

• The minimum time allowed for delivery of goods and the delivery schedule may be

mutually decided between the indenting officer and the contract holder.



Period of validity


70.

TARPAULIN Common Water proofed duck and paulin (Tarpaulin) conforming to IS No.2089/77 made out of cotton duck IS No.1422/83 • Variety-II • Variety-III

Rate per Sqr. Mtr.

87.70 70.75

02.11.2008

1. Utkal Tarpaulin Industry, I.E., Berhampur, Ganjam-8. 2. Konark Tarpaulin Industries, Bapujinagar, Bye-Pass Road, Jeypore-764001, Dist. Koraput. 3.Das Tarpaulin, Plot No.42, Shakti Nagar, Arunodaya Market, Cuttack-12. 4. Modi Enterprisers, At/P.O. Nayasarak, Cuttack-2. 5. Modi Dyeing & Proofing Works (P) Ltd., 59, New I.E., Jagatpur, Cuttack-21. 6.Hindustan Tarpaulin Industries, I.E., Sri Ramchandrapur, Chhatrapur, Ganjam 7.Western Proofing Industries, Khetrajpur, Sambalpur - 753003 (Total 7 units)

8.Padhi Industries,Private Plot 1380, Phase-2, Bhimatangi, Bhubaneswar-2 (Valid upto 20.12.2007)

TERMS OF DELIVERY & TAXES : 1.The rates are exfactory & exclusive of value added tax which may be charged extra as applicable if any. 2.The delivery schedule may e mutually decided between the Indenting Officer and the rate contract holding SSI units. 3.In order to avoid any complaint regarding quality, the Indenting Officers are requested to take delivery of the store items after conducting quality testing of their own. However on specific requisition from the Indenting Officers, the technical officers of the Directorate of EP&M, Orissa will conduct Pre-delivery Inspection. Rate Contract Circular No. 7825 dt.3.11.2007,8041 dt.19.11.2007 Description of the store item


Period of validity


Type Writer Ribbon Type writer Ribbon (Type-1) heavy inking conforming to IS:No.4174/77. The cotton fabric shall conform to IS:No.4686/80. The ribbon shall be of the following dimensions. a) Length of Ribbon, 10 mtrs. ± 0.25mm b)Width of Ribbon, 12.7 mm ± 0.4 mm c) Thickness of Ribbon 0.14 to 0.18mm

Per roll 18.05 25.02.2008 Konark Tapes, Kalyaninagar, College Square, Cuttack

71.

Terms of Delivery: 1.The rates are ex-factory, inclusive of cost of packing, exclusive of Value Added Tax and entry tax which may be charged extra as admissible, if any. 2.The delivery schedule may be mutually decided between the rate contract holder and the Indenting Officer. 3.In order to avoid any complaint regarding quality, the Indenting Officers are requested to take delivery of the store item after conducting quality testing of his own. On specific requisition from the Indenting Officer, the technical officers of the Directorate of Export Promotion & Marketing will conduct pre-delivery inspection(PDI) for which intimation should be sent to this Office sufficiently in advance. Rate Contract Circular No.1485 dt.26.02.2007 Description of the store item


Period of validity


72.

‘V’ TYPE CROSS ARM ‘V’ Type Cross Arm: 3. 11 KV “V” Cross Arms

made out of I.S.M.C.M.S. Channel 75x40 mm with two

Per Kg.

37.90

30.01.2008(E)

Mentioned below

coats of Rex Oxide Paints as per drawing No.2624/73 of OSEB having approximate weight of 11.2 kg.

4. 33 KV Cross Arm

made out of I.S.M.C.M.S. Channel 100x50 mm with 2 coats of Rex Oxide paints as per Drawing No.1589/69 of OSEB having approximate weight of 16.80 kg.

Per Kg.

37.80


• The rates are ex-factory and inclusive of Excise Duty,VAT and entry tax which may be charged extra, as admissible, if any.

• The delivery schedule may be mutually decided between the indenting officer and the

supplier.

Rate Contract Circular No. 6834 dt.7.9.07 Name of the Rate Contract holders 1. Sheo Industries, C-8, I.E., Cuttack-10(Annual Production Capacity Rs.87,00,000/- 2. Utkal Metal Products (P) Ltd., C-3, I.E., Berhampur-760 010, Ganjam(Annual Production Capacity 200MT, Rs.5,65,432/-) 3. Jena Engineering Works, Utkal Ashram Road, Berhampur, Pin-760001, Dist. Ganjam(Annual Production Capacity 84 MT) 4.Sahoo Fabrication,At/P.O.-Bamra(Station Basti,Dist:Sambalpur-21(Annual Production Capacity 1000 nos. Rs.4,00,000/-) 5.MM& Company,I.E., Cuttack 6.Orissa Steel & wire Products Ltd.,B-14,I.E.,Cuttack-10(Annual Production Capacity 240MT Rs.32,00,000/-) 7.Chhatia PanchayatIndustries Light engineering Co. Coperative Society Ltd.,At/P.O.-Chhatia, Dist:Jajpur 8.Indian Metal Industries,Nayabazar,Cuttack-4 9.Konark enterprises, A-40,I.E.,Cuttack-10 10.Krishna Engineering Works,M.G.Road,P.O.-Jeypore,Dist:Koraput(60 MT Rs.5,00,000/-) 11.New Modern Technomech(P)Ltd., S-2/29,I.E.,Chancha,Baripada,Dist:Mayurbhanj(60 MT Rs.5,00,000/-) 12.M.N.Engineering,Plot No.71, Fishery Lane, Chintamaniswar,BBSR,Dist:Khurda



Period of validity


73. WOOLLEN JERSEYS SOCKS AND HOSE TOPS. A. Khaki Woollen Jerseys

with shoulder slits/plain knitted worsted conforming to IS No.2360/77 with reinforcement made out of marine wool. Size: 80, 85,90, 95, 100, 105 cm. B. Khaki woolen socks knitted worsted conforming to IS: 2187/73 made out of Marino wool. Size: 23, 24, 25, 26, 27, 28, 29, 30, 31 cm. C. Khaki woollen hostops knitted worsted conforming to IS: 2523/63 made out of marino wool. Size: 45x6, 45x6.5, 50x6, 50x6.5 cm. D. Khaki woollen jerseys with shoulder slits/plain knitted worsted conforming to IS: 2360/77 without reinforcement made out of worsted wool. Sizes: 80, 85, 90, 95, 100 & 105 cm. E. Khaki woollen socks knitted worsted conforming to IS: 2187/73 made out of worsted wool. Sizes: 23,24, 25, 26, 27, 28, 29, 30,31 cm. F. Khaki woollen hostops knitted worsted confor-ming to IS: 2523/63 made

Rate per Piece

08.04.2008 1. Orissa Wool Industries, B-24, I.E., Cuttack-10. (Annual Production Capacity 18000 nos.) (Sl. No.’A’ to ‘F’)

2. Sushree Garments,

New Rousa Patna, Cuttack-753001. (Annual Production Capacity 5200 Pcs.)

(Sl. No. ‘A’,‘B’,‘D’& ‘E’ 3. Shakti Knitting Works,

At. Gopabandhu Vihar, New Rousa Patna, Buxi Bazar, Cuttack. (Annual Production Capacity Rs.10.00 lakhs)

(Sl. No. ‘A’,‘D’ and sizes of 25, 26 & 27 of Sl. No.A, B & E.

4. Saswot Industries, Tarinibihar, Bidanasi, Cuttack (Annual Production Certificate Rs.15,00,000/-)(Sl.No.A & D)

out of worsted wool. Size: 45x6, 45x6.5, 50x6, 50x6.5 cm.

(A) Khaki Woollen Jerseys with shoulder slits/plain knitted worsted conforming to IS No.2360/77 with reinforcement made out of marine wool.

Sl. No

Size in cm

Weight of 10 pcs in cms.

(a) 80 4480 (b) 85 5330 (c) 90 5610 (d) 95 5900 (e) 100 6180 (f) 105 6460

B. Khaki woolen socks knitted worsted conforming to IS: 2187/73 made out of worsted wool. Sl. No.

Size in cm

Weight of 10 pcs in Gms.

(a) 23 850 (b) 24 920 (c) 25 1000 (d) 26 1060 (e) 27 1130 (f) 28 1200 (g) 29 1270 (h) 30 1340 (i) 31 1410

C. Khaki woollen hostops knitted worsted conforming to IS: 2523/63 made out of

264/- 316/- 334/- 353/- 371/- 387/- 39/- 42/- 45/- 48/- 52/- 54/- 57/- 60/- 63/-

marino wool. Sl. No.

Size in cm

Weight of 10 pcs in cms.

(a) 45 x 6 1110 (b) 45 x 6.5 1170 (c) 50 x 6 1250 (d) 50 x 6.5 1310

66/- 69/- 74/- 77/-

D. Khaki woollen jerseys with shoulder slits/plain knitted worsted conforming to IS: 2360/77 without reinforcement made out of worsted wool. Sl. No.

Size in cm


(a) 80 3980 (b) 85 4830 (c) 90 5110 (d) 95 5480 (e) 100 5680 (f) 105 5960

E. Khaki woollen socks knitted worsted conforming to IS: 2187/73 made out of Marino wool. Sl. No.

Size in cm


(a) 23 850 (b) 24 920 (c) 25 1000 (d) 26 1060 (e) 27 1130 (f) 28 1200 (g) 29 1270 (h) 30 1340 (i) 31 1410

F. Khaki woollen hostops

191/- 229/- 241/- 255/- 268/- 280/- 54/- 58/- 62/- 66/- 70/- 74/- 78/- 81/- 85/-

knitted worsted conforming to IS: 2523/63 made out of worsted wool. Sl. No.

Size in cm


(a) 45 x 6 1110 (b) 45 x 6.5 1170 (c) 50 x 6 1250 (d) 50 x 6.5 1310

48/ 50/- 54/- 56/-

TERMS OF DELIVERY & TAXES : • The rates are ex-factory and inclusive of cost of packing and exclusive of VAT and entry tax which

may be charged extra, as admissible, if any.


• In order to avoid any complaint regarding quality, the Indenting Officers are requested to take delivery of the store items after doing quality testing of their own. However, on specific requisition from the Indenting Officer the technical officer of his Directorate of EP&M,Orissa,will conduct pre-delivery inspection of the store items.

Rate Contract Circular No. 6309 dt.18.8.07, 6685 dt.4.9.07

STATUS OF EP&M RATE CONTRACT ITEMS AS ON …industries.odisha.gov.in/PDF/epm2008.pdfinternal thread...

Documents

Transcript of STATUS OF EP&M RATE CONTRACT ITEMS AS ON …industries.odisha.gov.in/PDF/epm2008.pdfinternal thread...