STATIONARY COMPACTOR Our Mission
Transcript of STATIONARY COMPACTOR Our Mission
STATIONARY COMPACTORM O D E L G F 2 “ S t u b b y ”
Big Jobs in Small Spaces The Galfab stationary compactor GF2 “Stubby” allows for compactor installations
where room is a premium. Add to this a lower cost of dock installations by
eliminating the need for costly walk-on or drive-on decks and the fact that you can
eliminate employees from walking on top of a machine that could be wet and slick.
You can provide a safer more efficient installation.
Through-the-wall installation costs are also reduced thanks to the shorter feed
chutes which require less installation materials. Special Orkot wear blocks on the
four cast iron guide shoes of the packer blade provide a longer wear life, reducing
expensive floor and wall repair costs. The “Stubby” is ideal for all your waste
compaction applications.
The “Stubby” with an overall length of 71” features a guided and supported ram combined with a .38” AR plate floor. This combination along with the Galfab “NOSHOK” system provides the strongest compactor structurally and the most efficient and trouble free system hydraulically. This combination of features is unique to the industry.
Galfab “Stubby” compactors are manufactured in fixtures to insure concentric and consistent equipment every time. A superior paint finish is applied using a modified acrylic enamel with high UV protection. After application the paint is baked on to insure proper cure for exceptional durability. A clear chamber opening of 41” x 57” will handle most individual needs. A full 14” of ram penetration with built in breaker bar teeth provide compaction exceeding competitive models.
Our mission is to provide customers with a world class distribution of equipment, parts, and services supported by manufacturing facilities.232:1 612 West 11th Street, Winamac, IN 46996. 877.504.1622 · www.galfab.com
Our MissionGalfab’s mission is to provide our customers with a world class distribution of equipment, parts, and services supported by manufacturing facilities.
GF2 Stubby SpecificationsRam Top .38 Plate Ram Face .25 Plate Floor .38 AR Plate Clear Top Opening 41” x 57” Ram Penetration 14” Packing Force Normal 46,800 lbs. Packing Force Max. 51,150 lbs. Packing Pressure Normal 2,150 PSI Packing Pressure Max. 2,350 PSI Compactor Sides .25 Plate
Standard Power PackPower Pack 10 HP TEFC 3 Phase 230/460 Volt Hydraulic Pump 12 GPMReservoir 20 Gallons Cylinders (2) 4.0” x 37”
Cycle TimeTime 34 Seconds
Standard Features· 10 HP TEFC 3 Phase 208-230-460· Key Switch, Start & Stop Buttons· Electrical interlock system prevents operator injury· Exclusive 41” x 67.5” feed opening for larger items· Hi-Def Plasma-cut for tighter tolerances· Multi-cycle timer and 80% light· Charge chamber floor is AR plate· Baffled reservoir reduces heat in the oil and increases pump longevity· Multi-weight Talamar Extreme®· One year parts and labor warranty· Meets all ANSI Z245.2 standards· UL listed control panel
Optional Features· 100% Light· Oil Heater / Oil Level Switch· Door Auto Start· Pressure Gauge· Remote Control· Bio-Degradable Hydraulic Fluid
MODEL CAPACITY A B C D E F G H I J K L M WEIGHT1
GF2 1.72 y³ 61” 69.75” 41” 57” 63” 67.1875” 80” 71” 37” 51.5” 31.5” 14.5” 45” 3,675 lbs.
1 Approximate with Power Pack
B
C
G
I
F
E
D
H
M
A
J
Stationary Compactor Model GF2 “Stubby”
234:1232:113-KPC-000913-KPC-0010
232:1 612 West 11th Street, Winamac, IN 46996. 877.504.1622 · www.galfab.com
Clear TopOpening
GF2 Stubby Dimensions
L
K