station Assembly instructions
Transcript of station Assembly instructions
Intended use
This station has been developed and produced exclusively for vocational and further training in the field of automation and communication. The training authority and/or the instructors are to ensure that trainees observe the safety instructions described in the manual provided.
Festo Didactic herewith rules out all liability for damage or injury to trainees, the training authority or other third parties which may occur during the use/operation of this equipment other than purely in a training situation, unless it can be proved that Festo Didactic has caused such damage or injury through malicious intent or gross negligence.
Description MONT.ANLEIT
Designation: D:MP-MA-S-FLUID-1-EN
Status: 05/2004
Author: Frank Ebel
Graphics: Doris Schwarzenberger, Albert Sigel
Layout: 05/2004
© Festo Didactic GmbH & Co. KG, D-73770 Denkendorf, 2004
Internet: www.festo.com/didactic
e-mail: [email protected]
The copying, distribution and utilisation of this document, as well as the communication of its
contents to others without the express authorisation of Festo Didactic is prohibited. Offenders will be
held liable for the payment of damages. All rights reserved, in particular the right to carry out patent,
utility model or ornamental design registration
2 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
Contents
1. Notes on safety ________________________________________________ 5 2. Short description ______________________________________________ 6 3. Views and tools________________________________________________ 8 3.1 Views ________________________________________________________ 8 3.2 Tools for assembling and commissioning ___________________________ 9 4. Assembling the station_________________________________________ 10 4.1 Step 1: Profile plate____________________________________________ 10 4.2 Step 2: Cable ducts ____________________________________________ 11 4.3 Step 3: Electrical mounting system _______________________________ 12 4.4 Step 4: Components and modules ________________________________ 13 4.5 Step 5: Components and modules ________________________________ 14 4.6 Step 6: Components and modules ________________________________ 15 4.7 Step 7: Assembling completed ___________________________________ 16
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 3
1. Notes on safety
In the interests of your own safety, please observe the following safety instructions:
General • Trainees must only work on a station under the supervision of an instructor. • Observe the data in the data sheets for the individual components, particularly
all safety instructions!
Electrical • Electrical connections are to be wired-up or disconnected only when the power
supply is turned off! • Use only extra-low-voltages of up to max. 24 V DC.
Pneumatic • Do not exceed the maximum permissible pressure of 8 bar (800 kPa). • Do not switch on the compressed air supply until you have established and
secured all tubing connections. • Do not disconnect air lines under pressure. • Particular care is to be taken when switching on the compressed air supply.
Cylinders may advance or retract as the compressed air is switched on.
Mechanical • Attach all components securely on the mounting plate. • No manual intervention is to take place unless the machine is at rest.
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 5
2. Short description
View of the Handling station
The Fluidic Muscle Press station is an automated force fitting device. According to DIN 8593-3 Manufacturing production processes – Joining – Joining by mechanical means – Assembly by force fitting force fitting is the manner of joining, whereas an inner part is inserted into an outer part. The outer diameter of the inner part exceeds the inner diameter of the outer part.
The Fluidic muscle press station presses workpiece inserts into housings. The following workpiece inserts are available: a clock, a thermometer and a hygrometer.
The function of the Fluidic Muscle Press station is • press workpiece inserts into a workpiece (housing) • transfer the complete workpiece to a downstream station
Note The workpiece inserts „Clock“, „Thermometer“ and „Hygrometer“ fits only to the workpiece „Housing“.
6 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
The Fluidic Muscle Press station consists of the following:
• Fluidic Muscle Press module • Rotary-linear-changer module • Profil plate
• Trolley • Control console • PLC board
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 7
3. Views and tools
3.1 Views
Fluidic Muscle Press station, plan view
Fluidic Muscle Press station, r.h. side view
8 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
Views and tools
Fluidic Muscle Press station, front view
• Open-ended spanners, width across flats 7 mm x 8 mm, 9 mm x 10 mm, 12 mm x 13 mm, 22 mm x 24 mm
3.2 Tools for assembling and commissioning • Spanner, adjustable
• Tube spanner 9 mm x 10 mm • Allen keys 0,9 mm, 1,3 mm • Allen keys 1,5 mm, 2 mm, 2,5 mm, 3 mm,
4 mm, 5 mm, 6 mm • Screwdriver PZ 2 • Slot-head screwdriver 2,5 mm, 4 mm • Screwdriver 1,2 mm • Stripper • Wire cutting pliers • Cable end sleeve pliers • Tubing cutter • fibre-optic cable cutter • Measure, length 200 mm
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 9
4. Assembling the station
4.1 Step 1: Profile plate
1
10.
9.
8.
7.
6.
5.
4.
3.
2.
1.
11.
12.
13.
14. Nut
1 Profile plate
10 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
Assembling the station
4.2 Step 2: Cable ducts
2.1 (2x)
2.2 (4x)
2.3 (4x)
2.4 (4x) 2.8 (2x)
2.6 (2x)
2.7 (2x)
2.5
2.1 Cable duct
2.2 Socket-head screw M5 x 10
2.3 Washer B5.3
2.4 T-head nut M5-32
2.5 Mounting rail
2.6 Socket-head screw M5 x 10
2.7 Washer B5.3
2.8 T-head nut M5-32
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 11
Assembling the station
4.3 Step 3: Electrical mounting system
2
1.
3.
5.
2 Mounting the electrical mounting system
12 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
Assembling the station
4.4 Step 4: Components and modules
3
9
6.
4
5
6
8 (2x)
6.
7.
9.
11.
13.
7 (10x)
3 I/O terminal
4 Terminal
5 Pressure sensor
6 CP valve terminal
7 Cable clip (10x)
8 Connector (2x)
9 Fibre optic device
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 13
Assembling the station
4.5 Step 5: Components and modules
14
10
11
2.
2.
12.
1213
13.
12.
10 StationLink receiver
11 Proportional pressure regulator
12 Service unit
13 Fluidic Muscle Press module
14 StationLink transmitter
14 © Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station
Assembling the station
4.6 Step 6: Components and modules
7.
15
15 Rotary-linear-changer module
© Festo Didactic GmbH & Co. KG • Fluidic Muscle Press station 15