State-of-the-art Oxyhydrogen solutions
Transcript of State-of-the-art Oxyhydrogen solutions
State-of-the-art
Oxyhydrogen solutionsby
New Energy Corp.
What is Oxyhydrogen ?
Oxyhydrogen gas is obtained through water electrolysis, which uses an
electric current to dissociate the water molecules.
Oxyhydrogen is a gas mixture, containing hydrogen and oxygen atoms
and molecules, also known as Brown’s gas, named after the Bulgarian
inventor Yull Brown. The Oxyhydrogen has various applications such as :
• Fuel saving for internal combustion engines
• Processing of refractory materials and metals
• HHO carbon cleaning of engines, parts, etc.
• Electrolyzed water for agriculture and food industries
New Energy Corporation
New energy Corporation Ltd. is an engineering company,
established to develop and implement energy-saving and
environmentally friendly technologies. Since 2014 NEC Ltd. is
focused in the OXY-HYDROGEN generators design and
constructions.
The NEC Ltd. generators are known with their reliability, packed size
and the most important – cost effective Oxy-Hydrogen gas
production ( the lowest kwh/m3 known).
In recent years there has been a tendency to increase the
requirements of environmental standards for exhaust gases of internal
combustion engines, especially for diesel ones.
The factory-fitted dust particulate filters and catalytic
converters have their own life, which, in the dynamic time we live in, is
running out too quickly. Poor fuels, improper engine maintenance also
help to further shorten the life of these components.
Unfortunately, the cost of replacing these components is
quite high, as in old cars (over 5 years) it may be comparable to the
cost of the vehicle itself.
This issue has not been the case since yesterday, and various
technologies for cleaning dust particulate filters are available on the
market. Unfortunately, they do not guarantee 100% cleaning. Another
small problem is that these technologies are using chemicals, that are
harmful for the environment, and for the operators of the procedure.
Also, the chemicals are a consumable that binds the service provider
with the device manufacturer over time.
Based on the above, New Energy Corporation has developed
a technology with no analogue for cleaning of dust particulate filters
and catalytic converters of diesel engines.
www.newenergycorp.eu
CLEANING OF DPF AND CATALYTIC CONVERTERS OF DIESEL ENGINES
Using the oxy-hydrogen gas properties of combustion, we
created a gas mixture specifically for this purpose. The ignited gas
mixture reacts with the deposits in a specific manner by destroying
them without disturbing the ceramic structure of the treated part.
www.newenergycorp.eu
CLEANING OF DPF AND CATALYTIC CONVERTERS OF DIESEL ENGINES
The cleaned workpiece is
processed at "point" in layers to
prevent lateral heat transfer to the
surrounding surface.
No harmful gases are emitted
during the process, making it
environmentally friendly and
harmless to the operators of
the procedure.
Advantages of the technology:
www.newenergycorp.eu
CLEANING OF DPF AND CATALYTIC CONVERTERS OF DIESEL ENGINES
No chemical
compounds are
used.
- Ecologically clean - environmentally friendly, as well for the operators.
www.newenergycorp.eu
AFTER THE PROCEDURE
BEFORE THE PROCEDURE
www.newenergycorp.eu
BEFORE THE PROCEDURE
AFTER THE PROCEDURE
www.newenergycorp.eu
AFTER THE PROCEDURE
BEFORE THE PROCEDURE