STATE BOARD OF COMMUNITY COLLEGES ......incorporate the competencies of industry-recognized...
Transcript of STATE BOARD OF COMMUNITY COLLEGES ......incorporate the competencies of industry-recognized...
Attachment PROG 4
SBCC 04/25/2014
STATE BOARD OF COMMUNITY COLLEGES
CURRICULUM PROGRAM APPLICATION
(Existing Program)
The State Board will be asked to approve the curriculum program at the college listed on the
condition that equipment funds are available to the college and operating funds generated by the
budget formula will permit the offering of this program without any special allocation of funds.
Randolph Community College
Computer Technology Integration (A25500)
Facility Maintenance Technology (A50190)
Contact Person:
Ms. Jennifer Frazelle, Director
Academic Programs
919.807.7120
Attachment PROG 4A
SBCC 04/25/2014
PROGRAM APPLICATION
SUMMARY EVALUATION REPORT
Randolph Community College
Computer Technology Integration (A25500)
I. Program Planning
Randolph Community College (RCC) is seeking approval for the Computer Technology
Integration (CTI) (A25500) program to begin Fall 2014. The planning area is defined as the
college’s service area of Randolph County in addition to Alamance, Guilford, Chatham,
Montgomery, Moore, and Orange counties. All colleges were notified of the planning process for
this program.
The proposed program was approved by the Board of Trustees at Randolph Community College on
October 16, 2013. Minutes from this Board meeting were attached to the program application. The
President and the Board of Trustees of Randolph Community College have certified the following:
The proposed program will enhance the workforce of North Carolina, will provide
educational and training opportunities consistent with the mission of the college, and will not
duplicate the opportunities currently offered.
They have assessed the need for the proposed program and the resources required to maintain
a viable program and certify that the college can operate the proposed program efficiently
and effectively within the resources available to the college.
The college will complete a program accountability report including student success
measures, enrollment trends, completion rates, and employment data three years after
implementation of the program.
II. Program Rationale
Randolph Community College indicates the following:
Businesses in the service area of RCC have indicated a need to hire graduates who are well
versed in Information Technology. Letters and e-mails of support for the proposed program
were submitted to RCC by Randolph Hospital, ProNet, Randolph Bank & Trust, and J. C.
Pole & Associates, Inc.
The proposed CTI program is designed to prepare students to sit for a number of industry
certifications, including Cisco Certified Network Associate (CCNA), CompTIA (A+,
Network +, Server +, Linux +, Security+), as well as Microsoft Certified Professional (MCP)
and the System Security Certified Practitioner (SSCP).
There are no additional costs associated with the proposed program since computer labs are
in place and instructors are currently teaching for Randolph Community College.
Attachment PROG 4A
SBCC 04/25/2014
According to data obtained from the Economic Modeling Specialists International (EMSI)
Regional Partnership Workforce Development Board for Randolph and surrounding counties
for the period of 2009-2013, there were 60 annual job openings for Computer Support Specialist
related positions; 32 annual openings for Network/Computer Administrator related positions;
and 18 annual openings for Information Security Analysts/Web Developers/Network Architects
related positions.
The proposed CTI program will replace the existing Networking Technology (A25340) and
Computer Information Technology (A25260) programs, along with seven local computer
related diplomas and certificates.
In addition to traditional job opportunities, it is noted that a career in IT is especially suitable
for self-employment.
According to a survey conducted by Randolph Community College, 20 out of 90 current
RCC students expressed interest in the proposed program.
III. Impact of the Proposed Program on Other Programs
Twelve colleges are currently approved to offer the Computer Technology Integration (A25500)
program, and all 58 colleges are approved to offer similar programs. Impact Assessments were sent
to colleges in contiguous counties, no negative impact assessments were received.
IV. Implementation of Collaborative Plan
Not Applicable
V. Curriculum Design
The proposed program of study is in compliance with the State Board approved curriculum standard.
Coordinator: Dr. Hilmi A. Lahoud
C. Institutional Certification: Complete the following form and obtain required signatures.Form with original signatures should be included in the application.
Institutional Certification
This curriculum program __ C=o,-,-m""p...:::u=te::..:.r--,T,:...;e::..:c,-,-h:.:..;n=o..:..:lo::...:gy~I.:..:..n=t=:.<eg::..:.r....::a=tz=·0c:..:n'-------=oA..=.2=5::..;5::..;O::..:O"-- _(Program Title) (Program Code)
will enhance the workforce of North Carolina, will provide educational and trainingopportunities consistent with the mission of the college, and will not duplicate the opportunitiescurrently offered.
Randolph Community College(Community College Name)
has assessed the need for this program and the resources required to maintain a viable programand certifies that the college can operate this program efficiently and effectively within theresources available to the college.
The college understands that this proposed program will require a program accountabilityreport that will include items such as student success measures, enrollment trends, completionrates, and employment data three years after implementation if the program is approved by theState Board.
(A copy of the minutes from the Board of Trustees meeting(s) where the proposed programwas discussed and approved must be attached to the application.)
J/-bL-/3Date
~ ~ __LL .-~ ()/J 1/ -u-aSignatUre,!ioard ofT~~---- ---=-"''''---=D=a<-t-e-£::./~'------
Editorial Revision 021071136
*Within the degree program, the institution shall include opportunities for the achievement of competence in reading, writing , oral communication,
fundamental mathematical skills, and basic use of computers.
CURRICULUM STANDARD Effective Term
Fall 2012
[2012*03]
Curriculum Program Title Computer Technology Integration Code A25500
Concentration
Curriculum Description
The Computer Technology Integration (CTI) curriculum prepares graduates for employment as designers,
testers, support technicians, administrators, developers, or programmers with organizations that use
computers to design, process, manage, and communicate information, depending on the technical path
selected within this curriculum.
Course work includes development of a student’s ability to communicate and solve technical issues related to
information support and services, interactive media, network systems, programming and software
development, and other emerging technologies based on the selected area of study.
Graduates should qualify for employment in entry-level positions with businesses, educational systems, and
governmental agencies which rely on computer systems to design and manage information. The program will
incorporate the competencies of industry-recognized certification exams.
Curriculum Requirements*
[for associate degree, diploma, and certificate programs in accordance with 1D SBCCC 400.97 (3)]
I. General Education. Degree programs must contain a minimum of 15 semester hours including at least one course from
each of the following areas: humanities/fine arts, social/behavioral sciences, and natural sciences/mathematics. Degree
programs must contain a minimum of 6 semester hours of communications. Diploma programs must contain a minimum
of 6 semester hours of general education; 3 semester hours must be in communications. General education is optional in
certificate programs.
II. Major Hours. AAS, diploma, and certificate programs must include courses which offer specific job knowledge and
skills. Work-based learning may be included in associate in applied science degrees up to a maximum of 8 semester hours
of credit; in diploma programs up to a maximum of 4 semester hours of credit; and in certificate programs up to a
maximum of 2 semester hours of credit. (See second page for additional information.)
III. Other Required Hours. A college may include courses to meet graduation or local employer requirements in a
certificate, diploma, or associate in applied science program. These curriculum courses shall be selected from the
Combined Course Library and must be approved by the System Office prior to implementation. Restricted, unique, or free
elective courses may not be included as other required hours.
AAS Diploma Certificate
Minimum General Education Hours 15 6 0
Minimum Major Hours 49 30 12
Other Required Hours 0-7 0-4 0-1
Total Semester Hours Credit (SHC) 64-76 36-48 12-18
Approved by the State Board of Community Colleges on 07/17/09; Revised 06/17/11; CRC Revised - Electronic Only 02/29/12; SBCC Revised
03/16/12; Editorial revision 09/26/12; Editorial Revision 12/05/12; CRC Revised—Electronic Only 05/29/13; Editorial Revision 10/14/13;
Editorial Revision 12/09/13.
Major Hours [ref. 1D SBCCC 400.97 (3)]
A. Core. The subject/course core is comprised of subject areas and/or specific courses which are required for each
curriculum program. A diploma program offered under an approved AAS program standard or a certificate which is the
highest credential level awarded under an approved AAS program standard must include a minimum of 12 semester
hours credit derived from the subject/course core of the AAS program.
B. Concentration (if applicable). A concentration of study must include a minimum of 12 semester hours credit from
required subjects and/or courses. The majority of the course credit hours are unique to the concentration. The required
subjects and/or courses that make up the concentration of study are in addition to the required subject/course core.
C. Other Major Hours. Other major hours must be selected from prefixes listed on the curriculum standard. A
maximum of 9 semester hours of credit may be selected from any prefix listed, with the exception of prefixes listed in the
core or concentration. Work-based learning may be included in associate in applied science degrees up to a maximum of
8 semester hours of credit; in diploma programs up to a maximum of 4 semester hours of credit; and in certificate
programs up to a maximum of 2 semester hours of credit.
Computer Technology Integration A25500 AAS Diploma Certificate
Minimum Major Hours Required 49 SHC 30 SHC 12 SHC
A. CORE Courses required for the diploma are designated with *
Additional hours to meet the required number of hours for the diploma should be
extracted from courses with core prefixes.
26-27 SHC 17-18 SHC
Required Courses:
CTS 115 Info Sys Business Concept 3 SHC
* CTI 110 Web, Pgm, & DB Foundation 3 SHC
* CTI 120 Network & Sec Foundation 3 SHC
Select one set:
CTI 130 OS and Device Foundation 6 SHC
or
NOS 110 Operating System Concepts 3 SHC
and
CTS 120 Hardware/Software Support 3 SHC
or
CET 111 Computer Upgrade/Repair I 3 SHC
and
CET 211 Computer Upgrade/Repair II 3 SHC
or
CTS 120 Hardware/Software Support 3 SHC
and
CTS 220 Adv Hard/Software Support 3 SHC
Required Subject Areas: Select one course from one of the five (5) subject areas and an additional (9) credit
hours from prefixes within the same subject area selected:
Information Support and Services
CIS 110 Introduction to Computers 3 SHC
CIS 111 Basic PC Literacy 2 SHC
OST 122 Office Computations 2 SHC
Continued on next page
Approved by the State Board of Community Colleges on 07/17/09; Revised 06/17/11; CRC Revised - Electronic Only 02/29/12; SBCC Revised
03/16/12; Editorial revision 09/26/12; Editorial Revision 12/05/12; CRC Revised—Electronic Only 05/29/13; Editorial Revision 10/14/13;
Editorial Revision 12/09/13.
Computer Technology Integration A25500 (Continued)
Interactive Media
DEA 111 Introduction to DEAT 3 SHC
DME 110 Intro to Digital Media 3 SHC
GRD 110 Typography I 3 SHC
SGD 111 Introduction to SGD 3 SHC
WEB 110 Internet/Web Fundamentals 3 SHC
Network Systems
NET 110 Networking Concepts 3 SHC
NET 125 Networking Basics 3 SHC
NOS 110 Operation Systems Concepts 3 SHC
TNE 111 Campus Networks I 3 SHC
Programming and Software Development
CIS 115 Intro to Prog & Logic 3 SHC
CSC 133 C Programming 3 SHC
CSC 134 C++ Programming 3 SHC
CSC 135 COBOL Programming 3 SHC
CSC 139 Visual BASIC Prog 3 SHC
CSC 141 Visual C++ Prog 3 SHC
CSC 142 Visual COBOL Prog 3 SHC
CSC 151 JAVA Programming 3 SHC
CSC 153 C# Programming 3 SHC
DBA 110 Database Concepts 3 SHC
Emerging Information Technology:
CCT 110 Intro to Cyber Crime 3 SHC
EGR 115 Intro to Technology 3 SHC
GIS 111 Introduction to GIS 3 SHC
HBI 110 Issues and Trends in HBI 3 SHC
HPC 110 Intro to HPC 3 SHC
SEC 110 Security Concepts 3 SHC
B. CONCENTRATION
C. OTHER MAJOR HOURS
To be selected from the following prefixes:
ACC, BAS, BUS, CCT, CET, CIS, CJC, COE, CSC, CTI, CTS, DBA, DEA,
DES, DME, ECM, ECO, EGR, ELN, GIS, GRA, GRD, HBI, HIT, HMT,
HPC, ISC, ITN, MIT, MKT, NET, NOS, OMT, OST, SEC, SGD, SGR, TNE,
*WBL, and WEB
Up to three semester hour credits may be selected from the
following prefixes: ARA, ASL, CHI, FRE, GER, ITA, JPN, LAT,
POR, RUS and SPA.
*WBL prefix will be available in fall 2014.
Attachment PROG 4B
SBCC 04/25/2014
PROGRAM APPLICATION
SUMMARY EVALUATION REPORT
Randolph Community College
Facility Maintenance Technology (A50190)
I. Program Planning
Randolph Community College (RCC) is seeking approval for the Facility Maintenance Technology
(A50190) program to begin Fall 2014. The planning area is defined as the college’s service area of
Randolph County in addition to Alamance, Chatham, Davidson, Guilford, Montgomery, and Moore
counties. All colleges were notified of the planning process for this program. The proposed program was approved by the Board of Trustees at RCC on October 16, 2013. Minutes
from this Board meeting were attached to the program application. The President and the Board of
Trustees of RCC have certified the following:
The proposed program will enhance the workforce of North Carolina, will provide educational
and training opportunities consistent with the mission of the college, and will not duplicate the
opportunities currently offered.
They have assessed the need for the proposed program and the resources required to maintain a
viable program and certify that the college can operate the proposed program efficiently and
effectively within the resources available to the college.
The college will complete a program accountability report including student success measures,
enrollment trends, completion rates, and employment data three years after implementation of
the program.
II. Program Rationale
Randolph Community College indicated the following:
The college has experienced an increased demand for skilled trade instruction through their
continuing education courses. The college notes that maintenance and repairs continue even
during economic fluctuations, and may even increase as people decide to repair, rather than
replace equipment.
The U.S. Bureau of Labor and Statistics estimates that employment of general maintenance and
repair workers is expected to grow 11% between 2010 and 2020.
The U.S. Bureau of Labor and Statistics report that in 2010 the median pay for general
maintenance and repair workers was $34,730 per year.
According to data obtained from the EMSI Regional Partnership Workforce Development Board
for Randolph and surrounding counties, there were 96 annual job openings for maintenance and
repair workers in 2013.
ERMC Operations submitted a letter of support for the program indicating that the company is in
constant need of qualified candidates to fill positions within college’s service area. The
Attachment PROG 4B
SBCC 04/25/2014
company notes that they are in need of a labor force that can help maintain the buildings and
infrastructures currently in place in the county.
The Director of Facilities Operations at Randolph Community College notes that there is an
aging population of talented individuals in the spectrum of building and maintenance. She
believes that the formation of the program is needed to fill a much needed gap in the job market
for a skilled labor force that can help maintain the past and advance the community into the
future.
The Archdale-Trinity Chamber of Commerce submitted a letter of support and indicated that
they are supportive of the college’s focus on job skills which focus on the increased
sophistication of traditional systems which are transforming maintenance needs.
The College surveyed 48 students that are enrolled in continuing education courses that offer
similar skills and 26 students (54%) indicated interest in enrollment in the curriculum program.
III. Impact of the Proposed Program on Other Programs
Two community colleges are approved to offer the Facility Maintenance Technology (A50190)
program. Neither of these colleges are located in a contiguous county, therefore an impact assessment
was not required.
IV. Implementation of Collaborative Plan
Not Applicable
V. Curriculum Design
The proposed program of study is in compliance with the State Board approved curriculum standard.
Coordinator: Mr. Frank Scuiletti
C. Institutional Certification: Complete the following form and obtain required signatures.Form with original signatures should be included in the application.
Institutional Certification
This curriculum program Facility Maintenance Technology(Program Title)
(A50190)(Program Code)
will enhance the workforce of North Carolina, will provide educational and trainingopportunities consistent with the mission 0/ the college, and will not duplicate the opportunitiescurrently offered.
Randolph Community College(Community College Name)
has assessed the need for this program and the resources required to maintain a viable programand certifies that the college can operate this program efficiently and effectively within theresources available to the college.
The college understands that this proposed program will require a program accountabilityreport that will include items such as student success measures, enrollment trends, completionrates, and employment data three years after implementation if the program is approved by theState Board.
(A copy of the minutes from the Board of Trustees meeting(s) where the proposed programwas discussed and approved must be attached to the application.)
Ll- ZZ - I}Date
11-~/""1?Date
Editorial Revision 071171134
*Within the degree program, the institution shall include opportunities for the achievement of competence in reading, writing, oral communication, fundamental mathematical skills, and basic use of computers.
CURRICULUM STANDARD Effective Term
Fall 2013
[2013*03]
Curriculum Program Title Facility Maintenance Technology Code A50190
Concentration (not applicable)
Curriculum Description
This curriculum prepares individuals to repair and maintain electrical and mechanical systems and physical structures
of commercial and industrial institutions. Emphasis is on multi-disciplined systems maintenance, troubleshooting, and
problem resolution.
Course work includes carpentry, interior and exterior finishes, plumbing, electrical, masonry, air conditioning,
heating, welding, machining, blueprint reading, building codes, and OSHA regulations, as well as computer
applications.
Graduates should qualify for positions as general building mechanics or maintenance technician.
Curriculum Requirements*
[for associate degree, diploma, and certificate programs in accordance with 1D SBCCC 400.97 (3)]
I. General Education. Degree programs must contain a minimum of 15 semester hours including at least one course from
each of the following areas: humanities/fine arts, social/behavioral sciences, and natural sciences/mathematics. Degree
programs must contain a minimum of 6 semester hours of communications. Diploma programs must contain a minimum of 6
semester hours of general education; 3 semester hours must be in communications. General education is optional in certificate
programs.
II. Major Hours. AAS, diploma, and certificate programs must include courses which offer specific job knowledge and skills.
Work-based learning may be included in associate in applied science degrees up to a maximum of 8 semester hours of credit;
in diploma programs up to a maximum of 4 semester hours of credit; and in certificate programs up to a maximum of 2
semester hours of credit. (See second page for additional information.)
III. Other Required Hours. A college may include courses to meet graduation or local employer requirements in a certificate,
diploma, or associate in applied science program. These curriculum courses shall be selected from the Combined Course
Library and must be approved by the System Office prior to implementation. Restricted, unique, or free elective courses may
not be included as other required hours.
AAS Diploma Certificate
Minimum General Education Hours 15 6 0
Minimum Major Hours 49 30 12
Other Required Hours 0-7 0-4 0-1
Total Semester Hours Credit (SHC) 64-76 36-48 12-18
Approved by the State Board of Community Colleges on August 18, 2000; SBCC Revised 05/17/02; SBCC Revised 08/15/03; CRC Revised-Electronic Only 09/20/06; Revised 07/10/07; SBCC Revised 09/21/07; SBCC Revised 1/15/10; SBCC Revised 08/16/12; Editorial Revision 12/18/12; Editorial Revision 03/21/14.
Major Hours [ref. 1D SBCCC 400.97 (3)]
A. Core. The subject/course core is comprised of subject areas and/or specific courses which are required for each
curriculum program. A diploma program offered under an approved AAS program standard or a certificate which is the
highest credential level awarded under an approved AAS program standard must include a minimum of 12 semester
hours credit derived from the subject/course core of the AAS program.
B. Concentration (if applicable). A concentration of study must include a minimum of 12 semester hours credit from
required subjects and/or courses. The majority of the course credit hours are unique to the concentration. The required
subjects and/or courses that make up the concentration of study are in addition to the required subject/course core.
C. Other Major Hours. Other major hours must be selected from prefixes listed on the curriculum standard. A
maximum of 9 semester hours of credit may be selected from any prefix listed, with the exception of prefixes listed in
the core or concentration. Work-based learning may be included in associate in applied science degrees up to a
maximum of 8 semester hours of credit; in diploma programs up to a maximum of 4 semester hours of credit; and in
certificate programs up to a maximum of 2 semester hours of credit.
Facility Maintenance Technology A50190 AAS Diploma Certificate
Minimum Major Hours Required 49 SHC 30 SHC 12 SHC
A. CORE
Courses required for the diploma are designated with *
27-33 SHC 17-19 SHC
Required Courses:
* AHR 112 Heating Technology 4 SHC
* AHR 120 HVAC Maintenance 2 SHC
* BPR 130 Print Reading-Construction 3 SHC
* ELC 113 Residential Wiring 4 SHC
ELC 114 Commercial Wiring 4 SHC
MAS 140 Intro to Masonry 2 SHC
* MNT 110 Intro to Maintenance Procedures 2 SHC
Required Subject Areas:
Carpentry. Select One:
CAR 111 Carpentry I 8 SHC
CAR 140 Basic Carpentry 4 SHC
*Plumbing. Select One:
PLU 111 Intro to Basic Plumbing 2 SHC
PLU 115 Basic Plumbing 4 SHC
B. CONCENTRATION (Not applicable)
C. OTHER MAJOR HOURS
To be selected from the following prefixes:
AHR, BPR, CAR, CIS, COE, DFT, ELC, HOR, HYD, ISC, MAS, MEC,
MNT, PLU, PME, *WBL, and WLD
Up to three semester hour credits may be selected from the following
prefixes: ARA, ASL, CHI, FRE, GER, ITA, JPN, LAT, POR, RUS and
SPA.
*WBL prefix will be available in fall 2014.