Starting Dengan Reostad

5
LIQUID RESISTANCE STARTER BROCHURE 1/5 LIQUID RESISTANCE STARTER FOR SLIP-RING MOTORS UP TO 5500KW

description

rr

Transcript of Starting Dengan Reostad

  • LIQUID RESISTANCE STARTER BROCHURE

    1/5

    LIQUID RESISTANCE STARTER

    FOR SLIP-RING MOTORS UP TO 5500KW

  • LIQUID RESISTANCE STARTER BROCHURE

    2/5

    TECO SLIP-RING MOTOR LIQUID RESISTANCE STARTER are designed, manufactured and tested to meet the greatest quality requirement. These liquid

    resistance rheostats are suitable for all general applications. The unique design,

    first-grade material and excellent workmanship make TECO SLIP-RING

    MOTOR LIQUID RESISTANCE STARTER last much longer and give cost-efficient operation.

    FIXED ELECTRODE

    MOVING ELECTRODE

  • LIQUID RESISTANCE STARTER BROCHURE

    3/5

    BASIC SPECIFICATION

    ITEM Standard Specification

    J R X X - -

    _ Horse Power

    EMElectricManual dual purpose W/ Short Circuit

    _ENElectricManual dual purpose W/ Short Circuit

    _LLiquid Rheostat

    _LNormal Duty HHeavy Duty

    _ Resistors Series

    Model

    Max. Secondary Voltage: Up to 3600V (E2) Rating Max. Secondary Ampere: Up to 1800A (I2)

    Applied Motor Rating Up to 5500kW

    Operation Condition Indoor Service (Free from dust & corrosive gases)

    Ambient Temperature 0 40

    Relative Humidity Less than 80 % RH (Non-condensation) En

    viro

    nm

    ent

    Altitude Less than 1000 Meter ASL

    1. External frame of water tank : Antirust paint (5Y7/1) Painting

    2. Protecting cover : Antirust paint (5Y7/1) 1. Water tank : Made of integral FRP, high antirust capacity,

    mechanical intensity & heat tolerance 2. External frame: Made of U-shaped steel, high mechanical

    intensity Enclosure

    3. Protecting cover: Made of light stainless steel, easy maintenance

    Con

    stru

    ctio

    n

    Electrode

    Made of C5191copperhigh electric conductivity & mechanical intensity

  • LIQUID RESISTANCE STARTER BROCHURE

    4/5

    ITEM Standard Specification

    ManualHand wheel with deceleration gear Operating Method ElectricTECO brake motor with deceleration gear

    Three Times (Cold Start) Continuous Strating

    Frequency Twice (Hot Start)

    Strating Time 1560 SEC Adjustable (according to the setting of inverter)

    Cooling Method Natural Cooling

    Temp. Limitation Max. 95

    Spec

    ifica

    tion

    Magnetic Contactor Mitsubishi S-N Series or TECO CN Series

    Withstand Voltage Test AC 60HZ 2E1000V for 1min.(ERated secondary volt.)

    Test

    Insulation resistance

    Tested with 500Vdc insulation tester, the resistor is 2M & above from electrode to enclosure(earth)

    Sodium Carbonate Conform to CNS Standard

    Solu

    tion

    Solution Water Purged water or soft water, industrial water and salt water are forbidden

    NOTE: For the larger capacity of the motor, please contact with us directly.

    LIFE SPAN By employing transmission of electrode by horizontal track & employing high quality component to provide durable equipment & long operation life.

    REQUIRE SPACE Small volume & horizontal design, not limited by the height of factory building.

    MAINTENANCE With horizontal electrode track, it is not necessary to uplift the electrode while maintenance, easy maintenance.

  • LIQUID RESISTANCE STARTER BROCHURE

    5/5

    DESIGN INFORMATION REQUIRED 1)MOTOR RATING(KW)AND SPEED. 2)DRIVE TYPE (FAN,PUMP,ETC) 3)ROTOR VOLTS (E2). 4)ROTOR AMPS (I2) 5)DESIRED NUMBER OF STARTS PER HOUR. 6)DRIVE INERTIA OR UN UP TIMES. 7)STARTING TORQUE REQUIRED. 8)SPECIAL REQUIREMENTS SUCH AS OUTDOOR INSTALLATION.

    MANUFACTURED BY: YATEC ENGINEERING CORPORATION NO.34 SIHYUAN RD.,SINJHUANG CITY, TAIPEI COUNTY 242,TAIWAN TEL

    02-6635-7030

    DISTRIBUTED BY:

    Note:

    *1.Earth System Resistance

    value shall be under 25

    "A"

    D

    L

    CONTROL PANEL

    CONTROL

    PANEL

    CONTROL

    PANEL

    "A" VIEW

    HANDLE

    W

    W1

    H

    H1

    FRAME NO.

    W (mm)

    W1 (mm)

    H (mm)

    H1 (mm)

    L (mm)

    D (mm)

    MAX. E2

    MAX. I2

    WEIGHT WITHOUT

    WATER

    TANK CAPACITY

    F#100 1490 1200 1390 1090 2350 1670 2400V 750A 1000kg 800L

    F#170 1690 1200 1390 1390 2650 1970 3000V 1200A 1300kg 1400L

    F#250 1690 1200 1390 1390 3050 2270 3000V 1500A 1500kg 1900L

    F#350 1890 1400 1600 1590 3050 2270 3600V 1800A 1800kg 2500L

    DIMENSION: