Starter of the day 1.1.Is this art? 2.2.Why or why not? Give me at least one piece of evidence....
-
Upload
christina-oneal -
Category
Documents
-
view
213 -
download
0
Transcript of Starter of the day 1.1.Is this art? 2.2.Why or why not? Give me at least one piece of evidence....
Starter of the day1. Is this art?
2. Why or why not? Give me at least one piece of evidence.
3. What is the medium?
4. What is one art element you can see in this picture?
Remember you can look at your rubrics for definitions and you must always be working.
Agenda
•Go over what we did last time.• Listen to the steps to making a stencil• Finish designs and stencils•Make copies
Step 1
Come up with a plan before starting to make spray paint stencils. • Determine what size stencil you need. If the stencil is
going to be large, it is okay to include small details. If the stencil is going to be small, a simpler design should be used.• Know how many colors you want to include in the
stenciled image. This will affect the amount of materials you need and how many stencils you need to create.• For this assignment you will only use one color.
Step 2
• Draw a picture of the image
you want to create a stencil
From.
- Remember it has to all be connected to the outside material or it will not work.
Step 3
• Create the final image with clean lines and good contrast. • If you are drawing your own image, clearly
outline the areas of the image that will be cut out for the stencil. Remember that you need to define the edges and the details of your image, or the stencil will not portray your original drawing.
• If you are using a photograph or an online image, you need to use a software program that can adjust the contrast and brightness of your image so that you have defined dark and light areas.
Step 4
• Choose the type of stencil material you want to use. • Cardboard or foam board are good for large,
simple stencils on flat surfaces.• Paper works for a single-use stencil on either
flat or rounded surfaces.• Poster board holds up better than paper and
can be used on flat or slightly rounded surfaces.• Plastic or clear acetate are good if creating
reusable stencils for either flat or rounded surfaces.
• Frisket film, which is a clear film with a slightly sticky backing, is good for flat and rounded surfaces.
Step 5
• Cut out the areas of your image where you want the paint to show using a utility knife. If the stencil will have more than one color, create different stencils for each color.