Food Processing:

Paramount Industries / A Brand of HazLoc Industries, LLC 800-521-5405 Fax 800-852-7154 www.paramountlighting.comPARAMOUNTI N D U S T R I E S

BENEFITS:• Luminaires adaptable to your specific needs

FEATURES:• Premium Driver with Dimming standard• Available in stainless steel construction• Every luminaire tested to assure

customer satisfaction• 5 year limited warranty• Proudly made in USA

CORNER LITE APPLICATIONS:• UL/CUL Listed Wet Location• Cleanroom

(Classes 100-100,000; ISO Classes 5-9)

• NSF Certified Food Processing(Splash Zone, Food Zone)

• Industrial & Commercial• Transit

SPECIFICATIONS:HOUSING: Constructed of nominal 20GA (.036) zinc coated steel for unmatched corrosion protection. 1/2” threaded flange on back of luminaire provides wireway access. All seams are sealed with a long life acrylic sealant. Food Zone: All external metal components of stainless steel (S3 option std).

REFLECTOR: Fabricated of zinc coated steel, painted with a minimum reflectance of 88%.

LENS FRAME: Exclusively designed, heavy duty, extruded, anodized aluminum with captive screws used to hold the lens frame tight to the housing. The frame is supported by two cables while servicing. Food Zone: All external metal components of stainless steel (S3 option std).

GASKETING: An extruded, ribbed vinyl gasket seals the lens into the frame; with our exclusive, mechanically held, extruded, silicone gasket used to seal the frame to the housing. Splash Zone: Silicone sealant is used to seal the lens into the frame. Food Zone: Silicone sealant is used to seal the lens into the frame, with extruded EPDM sealing the frame to the housing.

FINISH: Painted surfaces are two mil white polyester enamel, special colors available.

LENS: .118 extruded StarFrost Acrylic standard, see ordering information for other options.

ELECTRICAL: High efficiency LED/Driver combination with 80+ CRI. 4000K color tempera-ture is standard with options for 2700, 3000, 3500 and 5000K. 0-10V dim-ming and other control options available. THD <10%@120V, <15%@277V, PF> .95.

MOUNTING: Surface or custom detail available for covered ceiling installations.

LENGTH DIMENSIONS IN INCHESA B C

2 FT 4 5/16 16 24 5/84 FT 8 5/16 32 47 1/46 FT 12 5/16 48 72 5/88 FT 16 5/16 64 91

1/2" THREADED FLANGE (WIRE ENTRY)

9/32" DIA. EMBOSSED MOUNTING HOLES

OPTIONAL MOUNTING STRAP W/ 5/16" DIA. MTG. HOLES

7 1/2"

8 1/16"

8 1/16"7 1/2"

ABA

3 3/4"

C

3"

1 1/2"

TAMPER RESISTANT SCREW HEADSOPTION SUFFIX- T3

TORX #10 SPANNER

HEX HEAD W/ PIN(STANDARD)

LENS FRAME DETAILS:

Starduster® K7 Series LED

LED

SURFACE

STAINLESS STEELLENS FRAME DETAIL

ALUMINUMLENS FRAME DETAIL

FOOD ZONELENS FRAME DETAIL

SPLASH ZONELENS FRAME DETAIL

LUMEN OUTPUT CLARIFICATION:

Lens transmission and fixture efficiency determine Delivered Lumens. Refer to the proper LM-79 Report for Delivered Lumens.

STARDUSTER® LUMINAIRE ORDERING INFORMATION:

LED ROWS

LLED LENGTH

Paramount Industries / A Brand of HazLoc Industries, LLC 800-521-5405 Fax 800-852-7154 www.paramountlighting.comPARAMOUNTI N D U S T R I E SInformation subject to change without notice. © 2020 Paramount Industries 304 N. Howard St. Croswell, MI 48422

1 7w/FT2 14w/FT

SERIES OPTIONSLENS OPT MATERIAL

2 2 FT4 4 FT6 6 FT8 8 FT

120-277V 50/60 Hz

VOLTAGE

* Note: If Stainless Steel is ordered, 304 SS Standard, 316 SS and other materials available, consult agent. Additional information regarding applications and proper Stainless Steel selection found in technical section of web site.

* The 20W Emergency Driver powers a minimum of 3 arrays and must be mounted on the outside of the fixture or in a remote dry/damp location. Maximum mounting height to comply with Egress Path Illumination levels is 20 feet.

Food Processing:

REVISED 6/2020

Project Information: Other Wattages Available, Consult Factory.NSF Food Processing Note:Food Zone (F prefix) luminaires come in DIRECT CONTACT with food. Splash Zone (S prefix) units may become soiled, but are outside the danger of recontamination.

K7 Wet Location/CleanroomSK7 Splash Zone (NSF)FK7 Food Zone (NSF)

3 .125 White Acrylic4 .140 Prismatic Acrylic (P12)5 .118 StarFrost Acrylic (base) 7 .125 White Polycarbonate8 .156 Prismatic Polycarbonate (P12)9 .187 Tempered Glass (P62)

LENSES AVAILABLE FOR FOOD ZONE

4 .140 Prismatic Acrylic (P12)5 .118 StarFrost Acrylic (base) 9 .187 Tempered Glass (P62)

*S2 Stainless Steel Housing*S3 Stainless Steel Exterior*S5 Stainless Steel Lens Frame Only

EMERGENCY DRIVERSEMD1 10W Emergency DriverEMD2 12W Emergency DriverEMD3* 20 W Emergency Driver

CCT (4000K Standard)27K = 2700K (Only 90 CRI)30K = 3000K35K = 3500K50K = 5000K

CRIRa90 90 Min CRI (N/A 5000K)

FUSINGF1 GLR/HLR Fusing (Fast)F2 GMF/HLR Fusing (Slow)

LENSINGH3 .150 Extra Heavy White AcrylicJ2 .060 Clear Acrylic OverlayJ6 .080 Clear Polycarbonate OverlayJ7 Louver (Specify)J9 RFI Lens (Specify Pattern)K3 .187 KSH-12 Acri-Tuf AcrylicK6 External Prisms (N/A Splash/Food Zones)

MISCM0 Mounting StrapsP9 Special Paint Color (Provide Paint Code & Chip)P11 Guardcraft® Antimicrobial CoatingT3 Tamper Resistant (Hex w/pin STD, Others Avail) N/A Food ZoneV0 No Silicone Sealant Used (-S5 option required)W4 Inboard Outboard Wiring (Dual Switching)Y1 Nite Lite (Consult Agent)Y5 RFI SuppressorsAdd hyphens between options

NOT ALL COMBINATIONS POSSIBLE

Starduster® K7 Series LED