SPECIFICATIONS:HOUSING: Constructed of 20GA (.036) zinc coated steel for unmatched corrosion protection. Featuring a double channel, one welded inside the other, with space between the channel sides to capture the diffuser. Threaded hubs are continuously welded into the channel ends providing a sealed wireway access. Removable plugs seal the hubs when not utilized. Food Zone: All external metal components of stainless steel (S3 option std).OPTIONAL PREMIUM MATERIALS: S3 - External metal components of 304 stainless steel. S4 - All metal components of 304 stainless steel.END CAPS: Die formed of 18GA (.048) stainless steel. A threaded, knurled ring secures the end cap to the luminaire housing. End caps secure lens.

GASKETING: EPDM is used in the housing channels and end caps.

FINISH: Painted surfaces are two mil white polyester enamel, special colors available.

LENS: One piece nominal .125 white translucent cell cast virgin acrylic. A two piece lens with center joiner band is available (H1 option).

ELECTRICAL: High efficiency LED/Driver combination. 28 LED’s per 11” board, 24 Volt constant voltage driver, 100 mA drive current, 4000K color temp., FR-4 board material, conformal coating for added moisture protection, 90ºC temp. rating for entire system. Temperature monitored and current cut back to protect LED’s against unusual environmental conditions.

MOUNTING: Surface, chain, or pendant options available for covered ceiling installations. Continuous row luminaires manufactured with aligning pins and utilize joiner bands. For further information, contact Sales Representative. Splash and Food Zone: Surface for covered ceiling installations only. TEMPERATURE CODE:Class I, Div. 2 = T4A (1200C); Class II, Div. 2 = T6 (850C)

(No fixture surface exposed to the hazardous atmosphere will exceed this tem-perature. Based on 400C (1040F) ambient.)

SQUARE POLYCARBONATE LENS AND END CAPC4 JOINER BANDS

1/2" THREADEDHUB W/ PLUG

ACD

B

3 1/4" 6 3/4"

A

5 9/16"

6"

9/32" DIA. EMBOSSED MTG. HOLES (STD)

OPTIONAL MTG STRAP W/5/16" DIA. MTG. HOLES

1/2" THREADED FLANGE (OPTIONAL, WET LOC.)

STARDUSTER®

APPLICATIONS:• UL/CUL Listed Wet Location• UL/CUL Hazardous Location

(Class I, Division 2; Groups A,B,C & D Class II, Division 2; Groups F & G)

• NSF Certified Food Processing(Splash Zone, Food Zone)

• Industrial & Commercial• Transit

LENGTH DIMENSIONS IN INCHESA B C D1 ft. 2 3/32 10 14 3/16 15 5/162 ft. 4 19/32 16 25 3/16 26 5/163 ft. 10 1/8 16 36 1/4 37 3/84 ft. 7 5/8 32 47 1/4 48 3/85 ft. 13 1/8 32 58 1/4 59 3/86 ft. 10 5/8 48 69 1/4 70 3/87 ft. 8 5/32 64 80 5/16 81 7/168 ft. 13 21/32 64 91 5/16 92 7/16

FEATURES:• High Light Output: Each array delivers 1200 lumen• Tested to LM79, LM80• L70 is >54,000 hours• Square version available• Available in Stainless Steel construction• Premium Constant Voltage Driver standard• Every luminaire tested to assure

customer satisfaction• 5 year limited warranty• Proudly manufactured in USA

Food Processing:

LED Product Partner

Hazardous Location:

Paramount Industries, Inc. 800-521-5405 Fax 800-852-7154 www.paramountlighting.com

Starduster® C4 Series LED

PARAMOUNTINDUSTRIES, INC.LED

LED | SURFACE

PARAMOUNTINDUSTRIES, INC.Information subject to change without notice. © 2014 Paramount Industries, Inc. P.O. Box 259 Croswell, MI 48422Project Information:

STARDUSTER® LUMINAIRE ORDERING INFORMATION:

SERIES LED ROWS

LLED

120-277V 50/60 Hz

VOLTAGE

C4 Wet LocationHC4 HazardousSC4 Splash ZoneFC4 Food Zone

OPTIONSLENS OPT MATERIAL

– –

*S3 Stainless Steel Exterior (recommended for indirect exposure to water)*S4 Stainless Steel Complete (recommended for direct exposure to water)

* Note: If Stainless Steel is ordered, 304 SS Standard, 316 SS and other materials available, consult agent. Additional information regarding applications and proper Stainless Steel selection found on page 21 of printed catalog, or technical section of web site.

1 FT.2 FT.3 FT.4 FT.5 FT.6 FT.7 FT.8 FT.

1 23 4 5 6 7 8

LENGTH

1 1200 lm/FT 10w/FT 2 2400 lm/FT 20w/FT

* The 20W Emergency Driver powers a minimum of 3 arrays and must be mounted on the outside of the fixture or in a remote dry/damp location. Maximum mounting height to comply with Egress Path Illumination levels is 17 feet.

3 .125 White Acrylic (base) (Cell Cast)4 .140 50% DR Extruded Prismatic Acrylic (P20) =5 .118 StarFrost Acrylic7 .125 White Polycarbonate =8 .156 Prismatic Polycarbonate (P12) = 9 Square Polycarbonate

(White Standard. Clear & Prismatic available.)LENSES AVAILABLE FOR FOOD ZONE

4 .140 50% DR Extruded Prismatic Acrylic (P20) =5 .118 StarFrost Acrylic (base)

Colored acrylic lens available, consult agent.

= Lengths greater than 4’ require two (2) lenseswith a Joiner Band.

EMERGENCY DRIVERS(Not Available for Hazardous Location)

EMD1 10W Emergency DriverEMD2 12W Emergency DriverEMD3* 20 W Emergency Driver

DIMMINGD3 Dimming (0 - 10V)

FUSINGF1 GLR/HLR Fusing (Fast)F2 GMF/HLR Fusing (Slow)

LENSINGH1 Tandem Lens With Joiner BandH2 .150 Extra Heavy Clear AcrylicH3 .150 Extra Heavy White AcrylicJ8 Wire Guard (N/A Splash/Food Zones)K8 Reflector Tape (Specify Location, Consult Factory)

MOUNTINGM0 Marine Mounting StrapsM1 Pendant Mount (Pendants by Others)M2 Mounting Bracket Kit (Surface / Chain)M3 In-Row (Row Information Required)

MISCP9 Special Paint Color (Provide Paint Code & Chip)S1 Special Material (Consult Agent)T3 Tamper ResistantT6 Screw-on End Caps (Requires -W5 also)T7 Hub Cap (In place of ring and plug)W5 Rear Wire Entry (Consult Factory)

Add hyphens between options

INDIVIDUAL UNITS STANDARD.

NSF Food Processing Note:Food Zone (F prefix) luminaires come in DIRECT CONTACT with food. Splash Zone (S prefix) units may become soiled, but are outside the danger of recontamination.

NOT ALL COMBINATIONS POSSIBLE

LUMEN OUTPUT CLARIFICATION:

All listed lumen values are Raw Array Values. Lens transmission and fixture efficiency determine Delivered Lumens. Refer to the proper LM-79 Report for Delivered Lumens.

Food Processing:

LED Product Partner

Hazardous Location:

Starduster® C4 Series LED

Paramount Industries, Inc. 800-521-5405 Fax 800-852-7154 www.paramountlighting.com REVISED 8/2016

Text15: Text16: Text17: Text18: Text19: Text20: Text22: