Standards publishedISO 50003:2014 * Energy management systems — Requirements for bodies providing...
Transcript of Standards publishedISO 50003:2014 * Energy management systems — Requirements for bodies providing...
Standards published New International Standards published between 01 October and 31 October 2014
* Available in English only
** French version of standard previously published in English only
Price group
PC 259 Outsourcing
ISO 37500:2014 * Guidance on outsourcing G
TC 8 Ships and marine technology
ISO 17325-2:2014 * Ships and marine technology — Marine environment protection — Oil booms — Part 2: Strength and performance requirements
A
ISO 18309:2014 * Ships and marine technology — Incinerator sizing and selection — Guidelines B
ISO 17907:2014 * Ships and marine technology — Single point mooring arrangements for conventional tankers
C
ISO 18289:2014 * Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches
B
ISO 18296:2014 * Ships and marine technology — Ship-shifting winches B
ISO 16556:2014 * Large yachts — Deck equipment — Anchoring equipments B
TC 17 Steel
ISO 683-17:2014 Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
D
TC 20 Aircraft and space vehicles
ISO 27027:2014 * Aerospace — Solid-state remote power controllers — General performance requirements
D
ISO 16919:2014 * Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
D
TC 22 Road vehicles
ISO 15007-1:2014 Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
C
TC 23 Tractors and machinery for agriculture and forestry
ISO 11783-3:2014 Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer
G
TC 28 Petroleum products and lubricants
ISO 10370:2014 * Petroleum products — Determination of carbon residue — Micro method B
ISO 17315:2014 * Petroleum products and other liquids — Ethanol — Determination of total acidity B
by potentiometric titration
TC 29 Small tools
ISO 26623-1:2014 Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
B
ISO 26623-2:2014 Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
A
TC 31 Tyres, rims and valves
ISO 14960-1:2014 Tubeless tyres — Valves and components — Part 1: Test methods B
ISO 14960-2:2014 Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method
B
TC 34 Food products
ISO 11133:2014 * Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media
H
ISO 22004:2014 Food safety management systems — Guidance on the application of ISO 22000 E
ISO 2451:2014 * Cocoa beans — Specification B
TC 35 Paints and varnishes
ISO 4618:2014 * Paints and varnishes — Terms and definitions A
ISO 16474-3:2013 Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
C
TC 36 Cinematography
ISO 71:2014 * Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
A
ISO 7832:2014 * Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration
B
TC 37 Terminology and other language and content resources
ISO 24156-1:2014 * Graphic notations for concept modelling in terminology work and its relationship with UML — Part 1: Guidelines for using UML notation in terminology work
D
TC 39 Machine tools
ISO/TR 17529:2014 * Machine tools — Practical guidance and example of risk assessment on electro-discharge machines
D
TC 45 Rubber and rubber products
ISO 815-1:2014 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures
C
ISO 1656:2014 * Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content D
ISO 2302:2014 * Isobutene-isoprene rubber (IIR) — Evaluation procedure B
TC 46 Information and documentation
ISO 10161-2:2014 * Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma
E
ISO 21127:2014 Information and documentation — A reference ontology for the interchange of cultural heritage information
H
ISO/TR 26122:2008 Information and documentation — Work process analysis for records C
TC 51 Pallets for unit load method of materials handling
ISO 18613:2014 Pallets for materials handling — Repair of flat wooden pallets C
TC 58 Gas cylinders
ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing E
ISO 10297:2014 Gas cylinders — Cylinder valves — Specification and type testing F
TC 60 Gears
ISO/TR 15144-2:2014
* Calculation of micro-pitting load capacity of cylindrical spur and helical gears — Part 2: Examples of calculation for micropitting
F
TC 61 Plastics
ISO 17855-1:2014 Plastics — Polyethylene (PE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
B
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
F
TC 69 Applications of statistical methods
ISO 22514-8:2014 Statistical methods in process management — Capability and performance — Part 8: Machine performance of a multi-state production process
F
TC 83 Sports and other recreational facilities and equipment
ISO 9462:2014 Alpine ski-bindings — Requirements and test methods E
ISO 13992:2014 Alpine touring ski-bindings — Requirements and test methods F
TC 84 Devices for administration of medicinal products and catheters
ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires D
TC 87 Cork
ISO 7322:2014 Composition cork — Test methods A
TC 94 Personal safety -- Protective clothing and equipment
ISO 16900-1:2014 Respiratory protective devices — Methods of test and test equipment — Part 1: Determination of inward leakage
E
TC 96 Cranes
ISO 9928-2:2014 * Cranes — Crane operating manual — Part 2: Mobile cranes A
ISO 11662-2:2014 * Mobile cranes — Experimental determination of crane performance — Part 2: Structural competence under static loading
F
TC 106 Dentistry
ISO 13116:2014 Dentistry — Test Method for Determining Radio-Opacity of Materials B
ISO 9680:2014 Dentistry — Operating lights C
ISO 17730:2014 Dentistry — Fluoride varnishes A
TC 110 Industrial trucks
ISO 22915-9:2014 Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer
B
TC 114 Horology
ISO 10552:2014 Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions B
TC 121 Anaesthetic and respiratory equipment
ISO 5367:2014 Anaesthetic and respiratory equipment — Breathing sets and connectors E
ISO 8836:2014 Suction catheters for use in the respiratory tract E
TC 126 Tobacco and tobacco products
ISO 10315:2013 Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method
C
ISO/TR 19478-1:2014
* ISO and Health Canada intense smoking parameters — Part 1: Results of an international machine smoking study
G
TC 131 Fluid power systems
ISO 6358-3:2014 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 3: Method for calculating steady-state flow-rate characteristics of systems
G
TC 145 Graphical symbols
ISO 9186-3:2014 Graphical symbols — Test methods — Part 3: Method for testing symbol referent association
C
TC 149 Cycles
ISO 4210-4:2014 * Cycles — Safety requirements for bicycles — Part 4: Braking test methods E
ISO 4210-6:2014 * Cycles — Safety requirements for bicycles — Part 6: Frame and fork test methods D
ISO 4210-8:2014 * Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system test methods
B
TC 150 Implants for surgery
ISO 14242-1:2014 Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
B
ISO 14243-3:2014 Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
C
TC 164 Mechanical testing of metals
ISO 16842:2014 Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece
D
TC 168 Prosthetics and orthotics
ISO 8549-4:2014 Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb amputation
A
TC 172 Optics and photonics
ISO 9022-4:2014 * Optics and photonics — Environmental test methods — Part 4: Salt mist B
ISO 17328:2014 Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials
C
ISO 14490-6:2014 * Optics and photonics — Test methods for telescopic systems — Part 6: Test methods for veiling glare index
B
TC 173 Assistive products for persons with disability
ISO 7176-1:2014 Wheelchairs — Part 1: Determination of static stability E
ISO 17069:2014 * Accessible design — Consideration and assistive products for accessible meeting C
TC 174 Jewellery
ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide
A
TC 181 Safety of toys
ISO 8124-4:2014 * Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use
G
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 13547-1:2014 * Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method
C
TC 184 Automation systems and integration
ISO 22400-1:2014 * Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations management — Part 1: Overview, concepts and terminology
D
TC 190 Soil quality
ISO 11268-3:2014 * Soil quality — Effects of pollutants on earthworms — Part 3: Guidance on the determination of effects in field situations
C
TC 198 Sterilization of health care products
ISO 11140-1:2014 Sterilization of health care products — Chemical indicators — Part 1: General requirements
E
TC 202 Microbeam analysis
ISO 14594:2014 * Microbeam analysis — Electron probe microanalysis — Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
C
ISO 14595:2014 * Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs)
C
TC 204 Intelligent transport systems
ISO/TS 16785:2014 * Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE and external in-vehicle devices
E
ISO/TR 17465-1:2014
* Intelligent transport systems — Cooperative ITS — Part 1: Terms and definitions B
ISO 29281-2:2013/Amd 1:2014
* Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 2: Legacy system support — Amendment 1
XZ
TC 215 Health informatics
ISO/TR 14639-2:2014
* Health informatics — Capacity-based eHealth architecture roadmap — Part 2: Architectural components and maturity model
H
TC 217 Cosmetics
ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS
B
TC 218 Timber
ISO 13061-1:2014 * Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests
A
ISO 13061-2:2014 * Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests
A
TC 223 Societal security
ISO 22300:2012 Societal security — Terminology B
TC 228 Tourism and related services
ISO 13687:2014 * Tourism and related services — Yacht harbours — Minimum requirements B
TC 242 Energy Management
ISO 50003:2014 * Energy management systems — Requirements for bodies providing audit and certification of energy management systems
C
TC 261 Additive manufacturing
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
C
ISO 17296-4:2014 Additive manufacturing — General principles — Part 4: Overview of data processing
B
CASCO Committee on conformity assessment
ISO/IEC TS 17021-7:2014
* Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 7: Competence requirements for auditing and certification of road traffic safety management systems
A
JTC 1 Information technology
ISO/IEC 8824-3:2008/Cor 1:2014
* Information technology — Abstract Syntax Notation One (ASN.1): Constraint specification — Part 3: — Technical Corrigendum 1
free
ISO/IEC 10373-5:2014
* Identification cards — Test methods — Part 5: Optical memory cards C
ISO/IEC 11694-5:2014
* Identification cards — Optical memory cards — Linear recording method — Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
C
ISO/IEC TR 11801-9901:2014
* Information technology — Generic cabling for customer premises — Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
F
ISO/IEC 24775-1:2014
* Information technology — Storage management — Part 1: Overview D
ISO/IEC 24775-2:2014
* Information technology — Storage management — Part 2: Common Architecture H
ISO/IEC 24775-3:2014
* Information technology — Storage management — Part 3: Common Profiles H
ISO/IEC 24775-4:2014
* Information technology — Storage management — Part 4: Block Devices H
ISO/IEC 27000:2014
Information technology — Security techniques — Information security management systems — Overview and vocabulary
E
ISO/IEC 14496-18:2004/Amd 1:2014
* Information technology — Coding of audio-visual objects — Part 18: Font compression and streaming — Amendment 1: Updated semantics of decoderSpecificInfo and font data description for ISOBMFF
XZ
ISO/IEC 17788:2014
* Information technology — Cloud computing — Overview and vocabulary B
ISO/IEC 17789:2014
* Information technology — Cloud computing — Reference architecture G
Standards confirmed The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 8752:2009
ISO 10669:1999 (reconfirmed)
ISO 13337:2009
ISO 7721-2:1990 (reconfirmed)
ISO 10644:2009
ISO 10673:2009
TC 6 Paper, board and pulps
ISO 8254-1:2009
TC 8 Ships and marine technology
ISO 28000:2007
ISO 15736:2006 (reconfirmed)
ISO 18813:2006 (reconfirmed)
TC 17 Steel
ISO 9444-1:2009
ISO 9444-2:2009
TC 20 Aircraft and space vehicles
ISO 2635:2003 (reconfirmed)
ISO 8056-2:1988 (reconfirmed)
TC 28 Petroleum products and lubricants
ISO 6615:1993 (reconfirmed)
TC 29 Small tools
ISO 603-11:1999 (reconfirmed)
ISO 2976:2005 (reconfirmed)
ISO 3366:1999 (reconfirmed)
ISO 3919:2005 (reconfirmed)
ISO 6344-1:1998 (reconfirmed)
ISO 6344-2:1998 (reconfirmed)
ISO 15636:2003 (reconfirmed)
TC 34 Food products
ISO 660:2009
ISO 16931:2009
ISO 22959:2009
TC 38 Textiles
ISO 105-B07:2009
ISO 105-F02:2009
ISO 105-F09:2009
ISO 105-G02:1993 (reconfirmed)
TC 44 Welding and allied processes
ISO 2560:2009
ISO 3834-1:2005 (reconfirmed)
ISO 3834-2:2005 (reconfirmed)
ISO 3834-3:2005 (reconfirmed)
ISO 3834-4:2005 (reconfirmed)
ISO 15607:2003 (reconfirmed)
ISO 15609-4:2009
ISO 15611:2003 (reconfirmed)
ISO 15614-6:2006 (reconfirmed)
ISO 17663:2009
ISO 22827-1:2005 (reconfirmed)
ISO 22827-2:2005 (reconfirmed)
TC 61 Plastics
ISO 6721-3:1994 (reconfirmed)
ISO 6721-12:2009
ISO 21509:2006 (reconfirmed)
ISO 25217:2009
ISO 25762:2009
ISO 3219:1993 (reconfirmed)
ISO 4593:1993 (reconfirmed)
ISO 6383-2:1983 (reconfirmed)
ISO 7765-1:1988 (reconfirmed)
ISO 7765-2:1994 (reconfirmed)
ISO 8510-2:2006 (reconfirmed)
ISO 14631:1999 (reconfirmed)
ISO 17087:2006 (reconfirmed)
ISO 19212:2006 (reconfirmed)
ISO 61:1976 (reconfirmed)
ISO 119:1977 (reconfirmed)
ISO 120:1977 (reconfirmed)
ISO 172:1978 (reconfirmed)
ISO 3001:1999 (reconfirmed)
ISO 7327:1994 (reconfirmed)
ISO 8975:1989 (reconfirmed)
ISO 8988:2006 (reconfirmed)
ISO 10082:1999 (reconfirmed)
ISO 14526-1:1999 (reconfirmed)
ISO 14526-2:1999 (reconfirmed)
ISO 14526-3:1999 (reconfirmed)
ISO 14527-1:1999 (reconfirmed)
ISO 14527-2:1999 (reconfirmed)
ISO 14527-3:1999 (reconfirmed)
ISO 14528-1:1999 (reconfirmed)
ISO 14528-2:1999 (reconfirmed)
ISO 14528-3:1999 (reconfirmed)
ISO 14529-1:1999 (reconfirmed)
ISO 14529-2:1999 (reconfirmed)
ISO 14529-3:1999 (reconfirmed)
ISO 14530-1:1999 (reconfirmed)
ISO 14530-2:1999 (reconfirmed)
ISO 14530-3:1999 (reconfirmed)
ISO 14849:1999 (reconfirmed)
ISO 14898:1999 (reconfirmed)
ISO 15038:1999 (reconfirmed)
ISO 15252-1:1999 (reconfirmed)
ISO 15252-2:1999 (reconfirmed)
ISO 15252-3:1999 (reconfirmed)
ISO 21627-1:2009
ISO 21627-2:2009
ISO 21627-3:2009
ISO 527-5:2009
ISO 1889:2009
ISO 1890:2009
ISO 15034:1999 (reconfirmed)
ISO 15040:1999 (reconfirmed)
TC 63 Glass containers
ISO 9100-1:2005 (reconfirmed)
ISO 9100-2:2005 (reconfirmed)
ISO 9100-3:2005 (reconfirmed)
ISO 9100-5:2005 (reconfirmed)
ISO 9100-6:2005 (reconfirmed)
ISO 9100-7:2005 (reconfirmed)
ISO 9100-10:2005 (reconfirmed)
ISO 9100-11:2005 (reconfirmed)
ISO 9100-12:2005 (reconfirmed)
ISO 9100-13:2005 (reconfirmed)
ISO 9100-14:2005 (reconfirmed)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO 23936-1:2009
ISO 10417:2004 (reconfirmed)
ISO 10432:2004 (reconfirmed)
ISO 17078-3:2009
ISO 17824:2009
TC 69 Applications of statistical methods
ISO 2859-1:1999 (reconfirmed)
ISO 2859-10:2006 (reconfirmed)
ISO 3951-5:2006 (reconfirmed)
ISO 8422:2006 (reconfirmed)
ISO 18414:2006 (reconfirmed)
TC 87 Cork
ISO 21128:2006 (reconfirmed)
TC 89 Wood-based panels
ISO 9424:2003 (reconfirmed)
ISO 9426:2003 (reconfirmed)
ISO 9427:2003 (reconfirmed)
ISO 16978:2003 (reconfirmed)
ISO 16979:2003 (reconfirmed)
ISO 16983:2003 (reconfirmed)
ISO 16984:2003 (reconfirmed)
ISO 16999:2003 (reconfirmed)
ISO 20585:2005 (reconfirmed)
TC 92 Fire safety
ISO 5658-2:2006
TC 96 Cranes
ISO 4301-2:2009
ISO 11661:1998 (reconfirmed)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 14839-1:2002 (reconfirmed)
ISO 18649:2004 (reconfirmed)
ISO 20283-3:2006 (reconfirmed)
ISO 22266-1:2009
ISO 5982:2001 (reconfirmed)
ISO 13091-2:2003 (reconfirmed)
ISO 13753:1998 (reconfirmed)
ISO 14835-1:2005 (reconfirmed)
TC 112 Vacuum technology
ISO 1609:1986 (reconfirmed)
TC 113 Hydrometry
ISO 9825:2005 (reconfirmed)
ISO 4363:2002 (reconfirmed)
TC 127 Earth-moving machinery
ISO 10263-1:2009
ISO 10263-2:2009
ISO 10263-3:2009
ISO 10263-4:2009
ISO 10263-5:2009
ISO 10263-6:2009
ISO 17063:2003 (reconfirmed)
TC 135 Non-destructive testing
ISO 10375:1997 (reconfirmed)
ISO 12710:2002 (reconfirmed)
ISO 18175:2004 (reconfirmed)
ISO 5576:1997 (reconfirmed)
ISO 14096-1:2005 (reconfirmed)
ISO 20807:2004 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 7684:1997 (reconfirmed)
TC 146 Air quality
ISO 8760:1990 (reconfirmed)
ISO 8761:1989 (reconfirmed)
ISO 16740:2005 (reconfirmed)
TC 153 Valves
ISO 6552:1980 (reconfirmed)
ISO 6554:1980 (reconfirmed)
ISO 6948:1981 (reconfirmed)
ISO 7841:1988 (reconfirmed)
ISO 7842:1988 (reconfirmed)
TC 173 Assistive products for persons with disability
ISO 7176-21:2009
ISO 16840-4:2009
TC 178 Lifts, escalators and moving walks
ISO 7465:2007
ISO 14798:2009
TC 188 Small craft
ISO 14509-2:2006 (reconfirmed)
ISO 10862:2009
TC 193 Natural gas
ISO 10101-1:1993 (reconfirmed)
ISO 10101-2:1993 (reconfirmed)
ISO 10101-3:1993 (reconfirmed)
ISO 11541:1997 (reconfirmed)
ISO 14111:1997 (reconfirmed)
TC 209 Cleanrooms and associated controlled environments
ISO 14698-1:2003
ISO 14698-2:2003
TC 213 Dimensional and geometrical product specifications and verification
ISO 463:2006 (reconfirmed)
ISO 3650:1998 (reconfirmed)
ISO 8785:1998 (reconfirmed)
ISO 13565-3:1998 (reconfirmed)
TC 216 Footwear
ISO 19954:2003 (reconfirmed)
TC 226 Materials for the production of primary aluminium
ISO 8007-3:2003 (reconfirmed)
ISO 8008:2005 (reconfirmed)
ISO 20203:2005 (reconfirmed)
TC 227 Springs
ISO 26909:2009
ISO 26910-1:2009
TC 228 Tourism and related services
ISO 11107:2009
ISO 11121:2009
JTC 1 Information technology
ISO/IEC 29341-2:2008
ISO/IEC 29341-3-2:2008
ISO/IEC 29341-3-3:2008
ISO/IEC 29341-3-11:2008
ISO/IEC 29341-3-12:2008
ISO/IEC 29341-3-13:2008
ISO/IEC 29341-4-12:2008
ISO/IEC 14443-4:2008
ISO/IEC 15693-3:2009
Standards withdrawn Period from 01 October to 31 October 2014
TC 31 Tyres, rims and valves
ISO 14960:2004 (replaced by ISO 14960-1:2014)
TC 61 Plastics
ISO 1872-1:1993 (replaced by ISO 17855-1:2014)
TC 110 Industrial trucks
ISO 10525:1997 (replaced by ISO 22915-9:2014)
TC 127 Earth-moving machinery
ISO/TS 20474-14:2008 (replaced by )
TC 131 Fluid power systems
ISO 6358:1989 (replaced by ISO 6358-1:2013, ISO 6358-2:2013, ISO 6358-3:2014)
TC 218 Timber
ISO 3131:1975 (replaced by ISO 13061-2:2014)
Meeting calendar (update at 01 October 2014)
Meetings called for the month of September are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
September-November 2014
4-4 Beijing (China) TC 83 Sports and other recreational facilities and equipment
November 2014
2-7 Belfort (France) TC 184/SC 4 Automation systems and integration/Industrial data
3-4 Tel Aviv (Israel) TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation
3-5 Madrid (Spain) PC 252 Natural gas fuelling stations for vehicles
3-5 Washington, D.C (USA)
TC 241 Road traffic safety management systems
3-7 Singapore (Singapore)
PC 277 Sustainable procurement
3-7 Cape Town (South Africa)
TC 45 Rubber and rubber products
3-7 Cape Town (South Africa)
TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies
3-7 Cape Town (South Africa)
TC 45/SC 2 Rubber and rubber products/Testing and analysis
3-7 Wuhan (China) TC 183 Copper, lead, zinc and nickel ores and concentrates
3-7 New Delhi (India) TC 229 Nanotechnologies
3-7 Lisbon (Portugal) TC 282 Water re-use
5-6 Lisbon (Portugal) TC 34/SC 4 Food products/Cereals and pulses
5-6 Tel Aviv (Israel) TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
6 Cape Town (South Africa)
TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
6 Istanbul (Turkey) TC 270 Plastics and rubber machines
6 Lisbon (Portugal) TC 282/SC 2 Water re-use/Water re-use in urban areas
7 San Diego (USA) TC 22/SC 10 Road vehicles/Impact test procedures
7 San Diego (USA) TC 22/SC 12 Road vehicles/Passive safety crash protection systems
7 Cape Town (South Africa)
TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
10-11
Edinburgh (United Kingdom)
TC 171/SC 2 Document management applications/Application issues
11-14
Ottawa (Canada) TC 244 Industrial furnaces and associated processing equipment
12 LEMONT (USA) TC 22/SC 3 Road vehicles/Electrical and electronic equipment
13-14
Berlin (Germany) TC 182/SC 1 Geotechnics/Geotechnical investigation and testing
14-20
Beijing (China) TC 130 Graphic technology
15-20
Abu Dhabi (United Arab Emirates)
JTC 1 Information technology
17-21
St. Augustine, Florida (USA)
TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
18-20
Madrid (Spain) TC 34/SC 7 Food products/Spices, culinary herbs and condiments
19 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
19 Trondheim (Norway) TC 234 Fisheries and aquaculture
19-21
Delft (Netherlands) TC 23/SC 13 Tractors and machinery for agriculture and forestry/Powered lawn and garden equipment
24-25
Geneva (Switzerland)
CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
24-28
Paris (France) PC 287 Chain of custody of wood and wood-based products
25-26
Shenzen (China) TC 211 Geographic information/Geomatics
26-28
Frankfurt (Germany) TC 184/SC 1 Automation systems and integration/Physical device control
28 London (United Kingdom)
TC 158 Analysis of gases
December 2014
1-4 Copenhagen (Denmark)
TC 98 Bases for design of structures
1-5 Dublin (Ireland) TC 260 Human resource management
3-5 Tokyo (Japan) TC 232 Learning services outside formal education
3-5 Paris (France) TC 269 Railway applications
4-5 Fukuoka (Japan) TC 197 Hydrogen technologies
5 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
8-10
London (United Kingdom)
TC 147/SC 3 Water quality/Radioactivity measurements
9-12
Madrid (Spain) PC 273 Customer contact centres
17 Frankfurt (Germany) TC 291 Domestic gas cooking appliances
1-4 Copenhagen (Denmark)
TC 98/SC 2 Bases for design of structures/Reliability of structures
1-4 Copenhagen (Denmark)
TC 98/SC 3 Bases for design of structures/Loads, forces and other actions
January 2015
12-16
Weinheim (Germany) TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in process management
19-20
Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics
19-23
Copenhagen (Denmark)
* JTC 1/SC 35 Information technology/User interfaces
22-23
Cape Town (South Africa)
TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
25-29
Foshan (China) TC 107 Metallic and other inorganic coatings
25-29
Foshan (China) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29
Foshan (China) * TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
26-27
Paris (France) TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food
28 Berlin (Germany) TC 207/SC 3 Environmental management/Environmental labelling
February 2015
2-5 Beijing (China) TC 257 Evaluation of energy savings
3-13
London (United Kingdom)
* TC 213 Dimensional and geometrical product specifications and verification
9-13
Fairfax (USA) TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders
11 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
11 St. Petersburg, Florida (USA)
TC 115 Pumps
12-13
Geneva (Switzerland)
President's committee
President's committee
22-23
Miami (USA) TMB Technical Management Board
March 2015
3 Virtual (Unknown) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
9-13
London (United Kingdom)
TC 110/SC 4 Industrial trucks/Rough-terrain trucks
12 West Conshohocken (Philadelphia) (USA)
TC 221 Geosynthetics
15 Caparica (Portugal) * TC 48 Laboratory equipment
16 Geneva (Switzerland)
President's committee
President's committee
16-18
Geneva (Switzerland)
COUNCIL Council
23-27
Vienna (Austria) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
23-27
Paris (France) * PC 278 Anti-bribery management systems
Rio de Janeiro (Brazil)
** PC 287 Chain of custody of wood and wood-based products
March-June 2015
25-26
Nara (Japan) * TC 184 Automation systems and integration
March-April 2015
31-2
Montreal (Canada) * TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
1st Quarter 2015
(United Kingdom) ** PC 284 Management system for private security operations - Requirements with guidance
Paris (France) * TC 24/SC 4 Particle characterization including sieving/Particle characterization
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
April 2015
10 London (United Kingdom)
* TC 92/SC 1 Fire safety/Fire initiation and growth
13-14
Lyon (France) TC 117 Fans
13-17
Tienjin (China) ** TC 161 Control and protective devices for gas and/or oil burners and appliances
13-17
(Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
19-24
Vico Equense (Italy) * TC 184/SC 4 Automation systems and integration/Industrial data
20-22
Zurich (Switzerland) * TC 126 Tobacco and tobacco products
20-22
Zurich (Switzerland) * TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests
20-22
Zurich (Switzerland) * TC 126/SC 2 Tobacco and tobacco products/Leaf tobacco
20-24
San Francisco (USA) * TC 215 Health informatics
21 Beijing (China) ** TC 274 Light and lighting
21-22
Düsseldorf (Germany)
* TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
21-22
(Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
22-24
General Roca (Argentina)
* TC 34/SC 12 Food products/Sensory analysis
23 Düsseldorf (Germany)
* TC 44/SC 11 Welding and allied processes/Qualification requirements for welding and allied processes personnel
24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifications for paper and board
25 Atlanta (USA) ** TC 6 Paper, board and pulps
(France) ** TC 29 Small tools
(France) ** TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
(USA) ** TC 34/SC 15 Food products/Coffee
May 2015
1-7 (United Kingdom) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
4-7 Toronto (Canada) * TC 68 Financial services
4-8 Kuching (Malaysia) ** JTC 1/SC 27 Information technology/IT Security techniques
4-8 (Unknown) ** TC 36 Cinematography
8-15
Tokyo (Japan) ** TC 10 Technical product documentation
11-12
Kuching (Malaysia) * JTC 1/SC 27 Information technology/IT Security techniques
11-15
Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Interoperability, integration, and architectures for enterprise systems and automation applications
11-16
Bologna (Italy) ** TC 130 Graphic technology
12-15
London (United Kingdom)
** TC 156 Corrosion of metals and alloys
13 Paris (France) ** TC 87 Cork
18-22
(Brazil) ** JTC 1/SC 40 Information technology/IT Service Management and IT Governance
18-22
London (United Kingdom)
** TC 4 Rolling bearings
18-22
Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22
Luzern (Switzerland) * TC 114 Horology
22 Cape Town (South Africa)
* TC 228 Tourism and related services
25-29
Madrid (Spain) ** TC 23/SC 18 Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
26-29
(Argentina) ** TC 85/SC 5 Nuclear energy, nuclear technologies, and radiological protection/Nuclear fuel cycle
27 London (United Kingdom)
** TC 67/SC 5 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
Glasgow, Scotland (United Kingdom)
** JTC 1/SC 32 Information technology/Data management and interchange
(USA) ** PC 272 Forensic sciences
8-15
Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions
8-15
Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Mechanical engineering documentation
8-15
Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation
Tokyo (Japan) ** TC 113 Hydrometry
Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods
Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures
Tokyo (Japan) ** TC 113/SC 5 Hydrometry/Instruments, equipment and data management
Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport
Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water
London (United Kingdom)
** TC 131/SC 6 Fluid power systems/Contamination control
June 2015
1-5 Sapporo (Japan) ** TC 42 Photography
1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwater acoustics
1-6 Philadelphia (USA) ** TC 147 Water quality
3-5 (Japan) ** TC 145 Graphical symbols
8-12
Berlin (Germany) ** TC 121 Anaesthetic and respiratory equipment
9-12
Pretoria (South Africa)
** REMCO Committee on reference materials
10-11
(France) ** TC 17/SC 9 Steel/Tinplate and blackplate
15-19
Vancouver (Canada) ** TC 22/SC 13 Road vehicles/Ergonomics applicable to road vehicles
17-18
Geneva (Switzerland)
* TMB Technical Management Board
18-19
Frankfurt (Germany) * TC 184/SC 2 Automation systems and integration/Robots and robotic devices
21-26
Matsue (Japan) ** TC 37 Terminology and other language and content resources
22-25
Avignon (France) * TC 54 Essential oils
22-26
(Netherlands) ** TC 34/SC 9 Food products/Microbiology
22- (China) ** TC 69 Applications of statistical methods
26
22-26
Göteborg (Sweden) * TC 188 Small craft
30 Virtual (Unknown) * President's committee
President's committee
Matsue (Japan) ** JTC 1/SC 28 Information technology/Office equipment
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
Zurich (Switzerland) ** TC 17/SC 17 Steel/Steel wire rod and wire products
(Europe) ** TC 34/SC 18 Food products/Cocoa
Beijing (China) ** TC 46 Information and documentation
Mexico City (Mexico) ** TC 242 Energy Management
(Unknown) ** TC 268/SC 1 Sustainable development in communities/Smart community infrastructures
June-July 2015
30-3
(Cyprus) ** TC 193 Natural gas
30-3
(Cyprus) ** TC 193/SC 3 Natural gas/Upstream area
2nd Quarter 2015
(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Protective clothing
Istanbul (Turkey) ** TC 120 Leather
(China) ** TC 172/SC 7 Optics and photonics/Ophthalmic optics and instruments
1st Semester 2015
London (United Kingdom)
** TC 8/SC 8 Ships and marine technology/Ship design
(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
July 2015
1-7 Berlin (Germany) * TC 91 Surface active agents
(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
August 2015
26-28
Jeju (Korea, Republic of)
* TC 206 Fine ceramics
August-September 2015
31-4
Hokaido (Japan) * JTC 1/SC 35 Information technology/User interfaces
September 2015
1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment
7-14
Sydney (Australia) ** TC 96 Cranes
13 Seoul (Korea, Republic of)
* President's committee
President's committee
13-17
Lahaina, Hawaii (USA)
** TC 127 Earth-moving machinery
14 Seoul (Korea, Republic of)
* COUNCIL Council
14-18
(Canada) ** TC 205 Building environment design
14-25
Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
15 Seoul (Korea, Republic of)
* DEVCO Committee on developing country matters
15-16
Seoul (Korea, Republic of)
* TMB Technical Management Board
16-18
Seoul (Korea, Republic of)
* GA General Assembly
17 Seoul (Korea, Republic of)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
17-18
Moscow (Russian Federation)
** TC 197 Hydrogen technologies
28-29
Basel (Switzerland) ** TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
(Europe) ** TC 22/SC 19 Road vehicles/Wheels
Vienna (Austria) ** TC 33 Refractories
(Europe) ** TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
(Japan) ** TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
Johor Bahru (Malaysia)
** TC 165 Timber structures
Seattle (USA) ** TC 201/SC 6 Surface chemical analysis/Secondary ion mass spectrometry
(Netherlands) ** TC 258 Project, programme and portfolio management
October 2015
1 Rome (Italy) * TC 39/SC 4 Machine tools/Woodworking machines
5-9 Dublin (Ireland) * JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
8 Virtual (Unknown) * President's committee
President's committee
12-16
Paris (France) * TC 34/SC 17 Food products/Management systems for food safety
15-17
Seattle (USA) * TC 201 Surface chemical analysis
19-23
(Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
19-23
Gaithersburg (USA) ** TC 92 Fire safety
19-23
Gaithersburg (USA) * TC 92/SC 1 Fire safety/Fire initiation and growth
22-23
Berlin (Germany) * TC 209 Cleanrooms and associated controlled environments
26-30
New Delhi (India) * JTC 1/SC 27 Information technology/IT Security techniques
27-29
Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders
28-30
Tsukuba (Japan) ** TC 202 Microbeam analysis
Madrid (Spain) ** TC 10/SC 8 Technical product documentation/Construction documentation
(Netherlands) ** TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals
(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
Nairobi (Kenya) ** TC 38 Textiles
Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns
Nairobi (Kenya) ** TC 38/SC 24 Textiles/Conditioning atmospheres and physical tests for textile fabrics
Sao Paulo (Brazil) ** TC 58/SC 2 Gas cylinders/Cylinder fittings
Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment
Sao Paulo (Brazil) ** TC 135/SC 9 Non-destructive testing/Acoustic emission testing
Santiago (Chile) ** TC 195 Building construction machinery and equipment
November 2015
9-12
(Spain) ** TC 189 Ceramic tile
9-13
Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting
11-13
(Malaysia) ** TC 123 Plain bearings
12-13
Kuala Lumpur (Malaysia)
** TC 227 Springs
(China) ** JTC 1 Information technology
4th Quarter 2015
Dayton, Ohio (USA) ** TC 159/SC 3 Ergonomics/Anthropometry and biomechanics
(China) ** TC 282 Water re-use
2nd Semester 2015
(France) ** TC 172/SC 1 Optics and photonics/Fundamental standards
(USA) ** TC 184/SC 4 Automation systems and integration/Industrial data
Month unknown 2015
Brussels (Belgium) ** TC 23 Tractors and machinery for agriculture and forestry
(Brazil) ** TC 23/SC 17 Tractors and machinery for agriculture and forestry/Manually portable forest machinery
(USA) ** TC 27 Solid mineral fuels
(Finland) ** TC 44 Welding and allied processes
(France) ** TC 45 Rubber and rubber products
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(United Kingdom) ** TC 164 Mechanical testing of metals
(Austria) ** TC 190 Soil quality
Vienna (Austria) ** TC 190/SC 2 Soil quality/Sampling
January 2016
(China) ** TC 120 Leather
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
March 2016
17-18
Geneva (Switzerland)
* COUNCIL Council
April 2016
Seoul (Korea, Republic of)
** TC 161 Control and protective devices for gas and/or oil burners and appliances
May 2016
(Brazil) ** TC 67/SC 4 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and production equipment
(India) ** TC 85 Nuclear energy, nuclear technologies, and radiological protection
June 2016
(Germany) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
1st Semester 2016
(China) ** TC 34/SC 16 Food products/Horizontal methods for molecular biomarker analysis
September 2016
19 Beijing (China) * COUNCIL Council
21-23
Beijing (China) * GA General Assembly
Paris (France) ** TC 17 Steel
Sao Paulo (Brazil) ** TC 209 Cleanrooms and associated controlled environments
Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
October 2016
(Korea, Republic of) ** TC 201 Surface chemical analysis
November 2016
(Norway) ** JTC 1 Information technology
Month unknown 2016
(Korea, Republic of) ** JTC 1/SC 23 Information technology/Digitally Recorded Media for Information Interchange and Storage
(Russian Federation) ** REMCO Committee on reference materials
(Denmark) ** TC 37 Terminology and other language and content resources
(Australia) ** TC 44 Welding and allied processes
(Malaysia) ** TC 45 Rubber and rubber products
Wellington (New Zealand)
** TC 46 Information and documentation
(Sweden) ** TC 102 Iron ore and direct reduced iron
(China) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
June 2017
(Australia) ** JTC 1/SC 36 Information technology/Information technology for learning, education and training
June 2018
(Korea, Dem. P. Rep. of)
** JTC 1/SC 36 Information technology/Information technology for learning, education and training