Standard- separator- evaporator- assembly · Alfa-Laval plate evaporator in combination with a WITT...
Transcript of Standard- separator- evaporator- assembly · Alfa-Laval plate evaporator in combination with a WITT...
Standard- separator- evaporator- assembly
SAV
spekte-SAV-Verdampfer_PRINT_Layout 1 30.09.16 21:34 Seite 3
The SAV is a high-performance unit, build from a semi-welded
Alfa-Laval plate evaporator in combination with a WITT high
efficiency separator type HAM and necessary accessories.
Reduce your planning effortWith our SAV-units all required dimensions, connections and weights are
available in 2D- and 3D-files before you start your design. You receive a
ready-made equipment that you do not need to invest any design time in.
Fast delivery time Our fast delivery times of five to six weeks make it possible for you to
concentrate on other critical lead items.
• Compressor surge valve type: AVR-angle (AWP)
DN125 (SAV10), DN150 (SAV15)
• Liquid injection valve type: AVR-angle (AWP)
DN50 (SAV10), DN65 (SAV15)
• Connecting flange type: F DN15
for optional dual safety valve unit
• Pressure gauge-/pressure sensor-/service-
connection
2x as dual service valves at the standpipe
• Oil-dome with valve DN 32
for optional automatic oil return, i.e. BDP
• 2 valves for manual oil draining EA10
At inlet of the plate heat exchanger and oil trap
• 1 service valve EA10
Evaporator return line
SpecificationComplete surge drum-evaporator unit in very compact design
according to AD200 and pressure vessel directive, module H1
• Supporting frame in painted steelincl. set-up and piping with stop valves before
the plate heatexchanger on the refrigerant side
• High-efficiency separator (WITT)type: HAM 660X2330 (SAV10)
type: HAM 813X2890 (SAV15)
• semi-welded plate heatexchanger (Alfa Laval )type: M10 RefTight (SAV10)
type: MK15 RefTight (SAV15)
• Standpipe in stainless steel with G1“ connection andstop valvesfor optional level sensor, i.e. RTK
• liquid-carry-over protection type: NGX (WITT)with stop valve DN32
Design options• flexibel valve position on top of
the surge drum
• right execution (plate evaporator
to the right, secondary connection
at the front)
• left execution (plate evaporator
to the left, secondary connection
at the back)
• divided execution with flanges
(only SAV15)
Accessories• PARKER safety valve unit
• RTK level probe
• WITT automatic oil return BDP
• Compressor surge valve type: AVR-angle (AWP)
DN125 (SAV10), DN150 (SAV15)
• Liquid injection valve type: AVR-angle (AWP)
DN50 (SAV10), DN65 (SAV15)
• Connecting flange type: F DN15
for optional dual safety valve unit
• Pressure gauge-/pressure sensor-/service-• Pressure gauge-/pressure sensor-/service-
connection
2x as dual service valves at the standpipe
• Oil-dome with valve DN 32
for optional automatic oil return, i.e. BDP
• 2 valves for manual oil draining EA10
At inlet of the plate heat exchanger and oil trap
• 1 service valve EA10
Evaporator return line
SpComplete surge drum-evaporator unit in very compact design
according to AD200 and pressure vessel directive, module H1
• Supporting frame in painted steelincl. set-up and piping with stop valves before
the plate heatexchanger on the refrigerant side
• High-efficiency separator (WITT)type: HAM 660X2330 (SAV10)
type: HAM 813X2890 (SAV15)type: HAM 813X2890 (SAV15)
• semi-welded plate heatexchanger (Alfa Laval )type: M10 RefTight (SAV10)
type: MK15 RefTight (SAV15)
• Standpipe in stainless steel with G1“ connection andstop valvesfor optional level sensor, i.e. RTK
• liquid-carry-over protection type: NGX (WITT)with stop valve DN32
DeDeDesisisigngngn o o o o o o o optppptpptptptpppptptioioioionsns• fl• fl• flexiexiexibelbelbel va va va va va va valvelvelvelve po positsition on top op of
thethethe su su su surgerge dr drumum
• ri• ri• rightght ex execuecutiotion (n (n (n (plaplaplaplate te te te te evaevaevaevaevaporporporporatoatoatoatorrrr
to to to to to to thethethethe ri ri rightghtght, s, secoecondandary ry conconconnecnecnecnectiotiotiotiotionnnn
at at thethe fr front)
• left execution (plate evaporator
to to to to to thethethethethe le le le le le le le left,ft,ft,ft,ft, se se se se seconconconconconcondardardardary cy cy cy cy cy connonnonnonnonnonnectectectectectionionionionionion
at thethethe ba ba back)ck)
• di• di• di• dividvidvidvided ed ed ed ed exeexeexeexecutcutcutcutionionionionionion wi wi wi wi wi wi with th th th th th th flaflaflaflaflaflaflangengengengengengessssss
(on(on(on(on(on(only ly ly ly SAVSAVSAVSAVSAVSAVS 11111115)5)5)5)5)5)5)5)5)
AccessoriesPARKER safety valve un unitititit
RTK level probe
WITT autautomaomatictic oi oil rl retueturn rn BDPBDP
Specification
DeDeDe••
•••
•
••••••
A•
• R• W
• AWP valves already installed
Alfa Laval •
semi-welded heat exchanger
WITT overfill-protection •
20 21
SAVStandard-separator-evaporator-unit
*Performance data: ammonia/ethylenglycol T0 = -10°C, -7°C/-3°C, delta Tm=3K
The SAV is a high-performance unit, build from a semi-wel
Alfa-Laval plate evaporator in combination with a WITT hi
efficiency separator type HAM and necessary accessories.
Reduce your planning effortWith our SAV-units all required dimensions, connections and weights ar
available in 2D- and 3D-files before you start your design. You receive a
ready-made equipment that you do not need to invest any design time i
Fast delivery time Our fast delivery times of five to six weeks make it possible for you to
concentrate on other critical lead items.
20
Standard-separator-evap
elded
high
s.
re
a
e in.
Alfa Laval •
semse i-welded heaeat t exchanger
•
WIWITWITT oovoverfirfirfirfirf ll-ll-proprotectecttiotion n n •
porator-unit• WITT integrated high
efficiency separator
• WITT stainless steel standpipe
• WITT oil trap
height
[mm]
2379
2985
diameter
[mm]
1297
1529
length
[mm]
2562
3245
capacity*
[kW]
500
1000
SAV10
SAV15
Gesamtprospekt-GB_2018_PRINT.qxp_Gesamtprospekt_D_2017 19.03.18 12:04 Seite 20
W0303-8
.04
-Eb
–E–03.18
Lukasstraße 32
52070 Aachen, Germany
+49 (0)2 41 1 82 08- 0
+49 (0)2 41 1 82 08- 490
High-quality refrigeration components
• HRP Hermetic refrigerant pumps
• GP Open refrigerant pumps
• HR & HS High side float regulators
• WP3HR High side float regulators for heat pumps up to 65 bar
• ECO Economizer
• BDP Automatic oil recovery
• NGX Maximum level switch
• HDB 3 Stainless steel oil drain vessel
• HAD High efficient separator
• Pumping stations
• SAV Standard-separator-evaporator-unit
• DB Pressure vessel units
• NH3/CO2 Cascades
WIL
KED
ESIG
N
www.th-witt.com
TH.WITT Kältemaschinenfabrik GmbH
Gesamtprospekt-GB_2018_PRINT.qxp_Gesamtprospekt_D_2017 19.03.18 12:04 Seite 28