Standard Horizontal Horizontal Truss

Stairs

LaddersTruss

Casters & Caster AdaptersTruss AdaptersTruss Plank Support

The Universal System Scaffold Rosette provides total flexibility to lock in any angle plus quickly and accurately align at 90° angles using the keyholepositions. Each Rosette can have up to eight connections at one time.

System Scaffolding Advantages:• Hot-dipped galvanized• No bolts or screws• Pre-measured components/

No measurements needed• Erects efficiently

• Conforms to any angle or curve• Rigid, versatile and very safe• Can be used in conjunction with

Tube and Clamp

Part No. Height WeightUS17T (Topping 1’ 7” 6.0 lbs

Off Column)US17 (1 Rosette) 1’ 7” 6.0 lbsUS33 (2 Rosettes) 3’ 3” 11.9 lbsUS411 (3 Rosettes) 4’ 11” 18.0 lbsUS66 (4 Rosettes) 6’ 6” 21.0 lbsUS99 (6 Rosettes) 9’ 9” 30.2 lbs

Part No. Length WeightUH20 (Blank) 2’ 6.0 lbsUH30 (Yellow) 3’ 8.3 lbsUH36 (Black) 3’ 6” 9.4 lbsUH40 (Orange) 4’ 10.5 lbsUH50 (Brown) 5’ 12.8 lbs

Part No. Length WeightUH60 (Blue) 6’ 15.0 lbsUH70 (Blank) 7’ 17.3 lbsUH80 (Green) 8’ 19.5 lbsUH100 (Red) 10’ 24.0 lbs

Part No. Length WeightU-SAUB Ladder Bracket 5.5 lbsU-SAU3 3’ Ladder Section 9.0 lbsU-SAU6 6’ Ladder Section 17.0 lbs

Part No. Description WeightUCBC Caster Base Collar 7.0 lbsF-8R 8” Pin Type Caster 13.0 lbsUS12CA 12” Caster Adapter 8.5 lbsP-12R 12” Plate Type Caster 38.0 lbs

Part No. Description WeightUCCS Clamp on 3.0 lbs

Column SupportUSTA Truss Adapter 3.5 lbsUHTCS Truss Column 7.0 lbs

Saddle

Part No. Length WeightUTPS20 2’ 15.1 lbsUTPS30 3’ 17.6 lbsUTPS36 3’ 6” 19.0 lbsUTPS40 4’ 19.9 lbsUTPS50 5’ 22.3 lbs

Part No. Length WeightUT12 12’ 81.0 lbsUT14 14’ 106.0 lbsUT16 16’ 106.0 lbsUT20 20’ 135.0 lbs

Part No. Length WeightUHT50 (Brown) 5’ 15.6 lbsUHT60 (Blue) 6’ 18.5 lbsUHT70 (Blank) 7’ 24.5 lbsUHT80 (Green) 8’ 36.8 lbsUHT100 (Red) 10’ 39.6 lbs

Part No. Description WeightUSSL70 7’ Left Stair Stringer 49.0 lbsUSSR70 7’ Right Stair Stringer 49.0 lbsUSTL Left Starter Stair Stringer 26.0 lbsUSTR Right Starter Stair Stringer 26.0 lbs

Part No. Description WeightUST26 2’ 6” Tread 11.5 lbs

(Use in 3’ 6” Bay) UST30 3’ Tread 13.8 lbs

(Use in 4’ Bay) UST40 4’ Tread 18.0 lbs

(Use in 5’ Bay)

Load Bearing

Non-Load Bearing

Load Bearing

*Also Available in 1-8 Step

universalscaffold.com 800-836-8780

stekcarB draoBstekcarB ediSlanogaiD

Scaffold RackLow Profile Steel Plank Hoist

Plan Braces Base Collar

Adjustable Base

The high-strength Mouthpiece uses a Wedge Pin with a reverse slope.The Wedge Pin engages the Rosette entirely through its vertical surface,ensuring a properly seated Mouthpiece on the Rosette while the Wedge isin place. The lobes are reversed to dramatically increase the compressionarea of the Mouthpiece connector. This provides greater mass area at thebottom of the Mouthpiece.

Part No. Bay Size WeightUD20 (Blank) 2’ 16.9 lbsUD30 (Yellow) 3’ 16.9 lbsUD36 (Black) 3’ 6” 17.3 lbsUD40 (Orange) 4’ 17.6 lbsUD50 (Brown) 5’ 18.6 lbsUD60 (Blue) 6’ 19.7 lbsUD70 (Blank) 7’ 21.5 lbsUD80 (Green) 8’ 22.2 lbsUD100 (Red) 10’ 25.0 lbs

Part No. Length WeightUSB20 2’ 14.0 lbsUSB30 3’ 21.0 lbsUSB36 3’ 6” 31.0 lbs

Part No. Length WeightUBB010 10” 3.1 lbsUBB010CO 10” 3.1 lbsUBB18 1’ 8” 8.0 lbsUBB27 2’ 7” 12.5 lbs

Part No. Description WeightU-SR-CS Scaffold Rack 116.0 lbs

Part No. Description WeightUSH-T System Hoist Top 10.0 lbsUSH-B System Hoist 15.0 lbs

BottomHAW-12 Hoist Arm Wheel 16.5 lbs

Part No. Length WeightUSP20ADG 2’ 10.9 lbsUSP30ADG 3’ 15.0 lbsUSP36ADG 3’ 6” 17.0 lbsUSP40ADG 4’ 19.3 lbsUSP50ADG 5’ 23.0 lbsUSP60ADG 6’ 27.0 lbsUSP70ADG 7’ 32.0 lbsUSP80ADG 8’ 35.0 lbsUSP100ADG 10’ 44.0 lbs

Part No. Description WeightUBC Base Collar 3.5 lbsUBCB Base Collar 6.0 lbs

with Bushing

Part No. Bay Size WeightUPB3670 3’ 6” x 7’ 19 lbsUPB4070 4’ x 7’ 19.8 lbsUPB5070 5’ x 7’ 20.5 lbs*Call for additional sizes.

Part No. Description WeightUSJ20 Screw Jack 13.8 lbsUSSJ20 Swivel Screw Jack 15.0 lbs

*All Sizes Available in 6” Wide Plank

UMC-429 Cover 17.qxd 2/21/11 11:49 AM Page 3

14

NOTES

550 West New Castle StreetZelienople, PA 16063Phone: (724) 452-8300Fax: (724) 452-0576www.universalscaffold.com