Standard Bakelite High Pressure Laminate
description
Transcript of Standard Bakelite High Pressure Laminate
![Page 1: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/1.jpg)
RPC Development in Beijing and Potential for NOA
Tianchi ZhaoUniversity of Washington
May 16, 2005
![Page 2: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/2.jpg)
BULKPhenolic/melamine resin with regular compressed
paper
SURFACEMelaminic phenolic resin
with fine paper
Standard Bakelite High Pressure Laminate
M. Abbrescia et al., “Test on the Performance of Resistive Plate Chambers inView of Their Use at the LHC,” International Conference on High EnergyPhysics of the European Physical Society, Jerusalem, Israel, August, 1997.
• Produced in Italy• Coordinated by INFN
Laminated by hot steel plates
![Page 3: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/3.jpg)
Linseed oil : Haptane = 40 % : 60 % Oil coating at T = 30 ~ 32o Drying the coated oil with air for 48 hours
Oiling Procedure for CMS End-cap RPCs
200 l tank
![Page 4: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/4.jpg)
SurfaceThin melamine film
Inventions Made at IHEP, Beijing
Much better surface quality than surfaces formed by fine paper and resin pressed by steel plates.
A very simple technical improvement with a dramatic effect on the RPC performance
(A) Pre-fabricated melamine film hot pressed on surface
![Page 5: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/5.jpg)
BULKModified phenolic
(B): A special process of modifying the phenolic polymer to obtain the desired bulk resistivity
• High resistivity: Low dark current, low noise
-> low rate capability
• Low resistivity: High dark current, high nois
-> high rate capability
![Page 6: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/6.jpg)
H.V. ElectrodesSpecial Graphite
Paint for the melamine surface
(C) Graphite Paiting
• A special graphite paint compatible to melamine film was developed together with Chinese industry. • Graphite layers is spray painted
![Page 7: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/7.jpg)
RPC Prototypes
• R&D started four years ago• Prototypes mostly a single gap, 0.6 m2 • Various plate resistivity: 1011 to 4x1012 cm• Streamer mode intended for low rate• Performance improves as they learn
![Page 8: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/8.jpg)
Prototype Performance
• Electrode resistivity: ~1012 cm • Ar/Freon134/Isobutane 32:60:8 (Belle gas)• Discrimination threshold: 100 mV
Best results are from a recent neutron radiation test
• Long plateau: ~ 2000 V• High efficiency 96-98% for a single 2 mm gap
![Page 9: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/9.jpg)
Cosmic Ray Counting Rate
• Noise rate: 0.04 Hz/cm2 at 7.5 kV
• At the cosmic ray rate level (cosmic: ~0.03 Hz/cm2)• Comparable performance as best oiled bakelite or glass RPCs
![Page 10: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/10.jpg)
Dark Current
• ~0.5 A @7.5 kV• No break down up to 9000 V
![Page 11: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/11.jpg)
Status of BESIII RPCs
• Prototypes show the performance is as good as
chambers made from oiled bakelite or glass
• A factory was setup in the south suburb of Beijing
• Pre-production started early 2004
• Just has an internal production readiness review
• Making 2000 m2 RPCs in 2 years
![Page 12: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/12.jpg)
Technical Details of BESIII RPC
• Standard double gap structure• Single layer of pick up strips• Bulk Resistivity: 2x1011 to 2x1012 cm
![Page 13: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/13.jpg)
Technical Details
Gap Structure
Spacer Arrangement
![Page 14: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/14.jpg)
Compare to Low Cost Glass RPCs Developed by Monolith
End caps by injection molding
NorylEnvelope
Thermoplastic solderingfor gas sealing
Spacers by injection molding
(2 mm)
Float Glass
Resistive film
• Bakelite does not break• Lower resistivity, bigger signal, slightly higher efficiency• Bakelite RPC does not need a plastic envelop
![Page 15: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/15.jpg)
Potential for NOA• The factory in Beijing can make PRCs with maximum size 4’x8’ (5’x10’ in Europe)
- Limited by their lamination press - Should be large enough for NOA
• They will be very happy to make a few for NOA
![Page 16: Standard Bakelite High Pressure Laminate](https://reader033.fdocuments.in/reader033/viewer/2022061614/56814886550346895db597e6/html5/thumbnails/16.jpg)
PlanFirst Step: Make several RPCs in Beijing and bring them back to U.S. for testing Single gap Double gap with three bakelite plates
Second Step:
Make several 4’x8’ chambers with the gap configuration we like
With readout electrodes and ground plane on particle board