RAnschütz

Standard 22 CompactGyro Compass Retrofit Solutions

Proven Gyro Compass Technology For More Than 100 Years

provide additional value and make day-to-day work easier.

The Standard 22 gyro compass compact is equipped with

automatic speed/latitude error correction and dynamic error

correction. By using the optional «quick settling mode» the

heading information is provided within just one hour after

start up of the compass.

All Standard 22 gyro compasses are approved for standard

and high-speed crafts. Standard 22 – really unique in its class.

Standard 22 compact is the most popular gyro compass

in the market – due to its performance and reliability.

Standard 22 uses sophisticated gyro compass technology

based on 100 years of experience. Operational safety was

dramatically increased due to a patented data transmission

technology that completely replaces the use of slip rings.

The Standard 22 combines proven technology and long

maintenance periods with most advanced features. A safe

investment in your ship – for a long time.

In addition to fulfill the main function as a heading sensor,

the Standard 22 gyro compass offers many features that

Standard 22 CompactAnd Retrofit Solutions

Retrofit Solutions

Raytheon Anschütz provides a variety of converters that enable

to retain your existing equipment as repeaters and autopilots

when retrofitting an old gyro compass.

Old gyro compasses transmit the heading information as analog

synchro or step signals. By one of the new converters the serial/

digital heading information from new compasses is converted

into analog signals.

Advantages: Reduced expenses for new equipment and reduced

installation efforts.

Replacing A Gyro With 360° Axis (1:1)

The Serial / 360° synchro converter converts serial heading

information (NMEA or course bus) to a coarse synchro output

(360°, compatible to 11 CX synchro) and can be used to connect

NautoCourse or old autopilots to new compasses. The reference

voltage has to be supplied by the connected equipment.

Technical data

Based on the reference voltage the following signal voltages can be created:

Reference voltage [V] Signal voltage [V] Frequency [Hz]

115 90 400

26 11.8 400

13 11.8 400

13 6 400

3.5 6 800

– Supply voltage 24 V DC,– Max. synchro output power 1.2 V A.

Standard 22• High accuracy of 0.1 degrees • Automatic speed/latitude error correction and dynamic error correction • Quick settling mode (option) • Wide range of accessories • Short installation time and long maintenance periods• IMO approved for standard and high-speed crafts

Retrofi t solutions• Cost-effi cient replacement of any old gyro compasses• Existing repeaters, autopilots and other heading receivers (periphery) can remain on board• Existing cabling can be used• Minimum installation time• Cost-effi cient solution for ship owner• Perfect solution for service organisations – almost all available compasses in the market can be retrofi tted with only 3 different converters

The serial / universal synchro converter converts serial head-

ing information (NMEA or course bus) into various synchro

signals. It is used when an old gyro compass (e.g from Anschütz,

C. Plath, Tokimec, Yokogawa, Hokushin, Microtechnica, Amur,

Kurs 4) with synchro output is replaced with a new Standard 22

to keep the existing equipment with synchro input (e.g. steering

repeaters).

Replacing a Gyro With Synchro Output

Technical data

– Configurable output of synchro signals: Reference voltage: 1..110 V Signal voltage: 1..100 V– Turn ratio: 1:360; 1:90; 1:36; 1:2; 1:1– Converter provides one selectable output signal format – For a load of max. 12 reference receivers– Supply voltage: 24 V DC

The serial / universal step converter converts serial heading

information (NMEA or course bus) into step (6step / degree)

signals. It is used when an old gyro compass (e.g. from Sperry,

Tokimec, Yokogawa, Robertson) with step output is replaced

with a new Standard 22 to keep the existing equipment with

step input (e.g. autopilots and steering repeaters).

The serial / universal step converter can alternatively be used

as a step booster.

Replacing A Gyro With Step Output

Technical data

– Configurable output of step signals with 24, 35, 50 or 70 V DC – One voltage configurable as common plus or common minus– Max. step output power: 150 W– 7 outputs (1 A fused), 1 output (6.3 A fused) for distribution– Converter provides supply voltage for Standard 22 (max.150 W)– Supply voltage: 115/230 V 50/60 Hz

Serial / Universal step converter

Serial / 360° synchro converter

Serial / Universal synchro converter

Your Benefi t

All rights reserved · Printed in GermanyRAN . e / L&S

Subject to change due to technical developments without notice.

Raytheon Anschütz GmbHHeadquartersD-24100 Kiel, GermanyTel +49(0)431-3019-0Fax +49(0)431-3019-291Email sales-commercial@raykiel.com www.raytheon-anschuetz.com

Ø 414

Top view(16.30")

429

(16.

89")

Standard 22 Gyro Compass

605(23.89")

153 (5.98")

250

(9.9

2")

261(10.28")

Serial/360° Synchro Converter 132 – 628.HP005VNM–DB 12.06.07

56(2.20")

87(3.43")

165

(6.5

0")

1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 X X X. X 1 2 3

1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 1 2 3 1 2 3 1 2 3 4 5 61 2 3 4 5 6 1 2 3

Serial/360° synchro converter

Serial/Universal step converter

Technical DataAccuracySettle point error 0.1°secLat., RMSStatic error 0.1°secLat., RMSDynamic error 0.4°secLat., RMS(periodic roll and pitch + horizontal acceleration) secLat.=1/cosLatitude

Supply voltage 24 V DC (18 – 36 V DC)

Power consumption80 W to 140 W (start-up) sensor unit

General dataPermissible ambient temperatureOperation –10° C to +55° CStorage –25° C to +70° C without supporting liquidSettling time 1h ( < 3°) with «Quick settling»Max. rate of follow-up 100 °/s Permissible periodic rolland pitch angle ±45°

Signal outputs 1 x Anschütz course bus2 x Anschütz course bus or NMEA

With distribution unit compact additionally– 12x RS 422 individually configurable as Course Bus or NMEA– 3 x step 35 V DC (6 steps/degree)– 1x RS 232C for course printer– Rate-of-turn ±10 V DC for 30°/min, 100°/min or 300°/min (non IMO compliant)

AlarmsBuilt-in alarms power failure, gyro failure, system failure Alarm outputs potential-free relay contacts In accordance withIMO A.424(XI), A694(17), A.821(19), MSC.97(73), MSC.36(63), EN/IEC 60945, EN/ISO 8728, ISO 16328, EN/IEC 61162

WeightMaster compass 17.5 kg

Type of enclosure acc. to IEC/EN 60529Gyro compass IP 23

�

485

(19

.10"

)

420

(16

.54"

)

300 (11.81")

420

(16.

54")

134 (5.28")

125 (4.92")

Serial/Universal synchro converter