Stampin’ Anonymous...2018/12/12 · gift card first to make sure adhesive isn’t impeding gift...

Stampin’ Anonymous December 2018 Tutorials

!

Thank you for your purchase! I hope that you enjoy the fabulous “better than flat” projects that my

fellow demonstrators and I have created for you this month. I appreciate your loyalty! Please remember

that these special tutorials are for you, and I do kindly ask that you not share them. If you’d like to share

an idea, please alter the project to make it your own and share it in your own words OR direct others to

where they can access the tutorial from me. The demonstrators that made these tutorials put a lot of work

into what they created. Your understanding is appreciated.

If I can answer any questions or help you with online ordering, please don’t hesitate to call me. I want to

give you the BEST service I can!

Stamp Your Art Out!

Wendy Cranford

Stampin' Up!® Demonstrator

[email protected]

www.luvinstampin.com

Stampin’ Anonymous Tutorials ©Stampin’ UP!

Pretty Kitty Birthday Box

!


Supply List:

• 141864 Pretty Kitty Stamp Set • 143907 Tabs for Everything Stamp Set • 132708 Memento Stamp Pad • 147093 Mango Melody Stamp Pad • 145054 Light Smoky Slate Stampin’ Blends • 144601 Crumb Cake Stampin’ Blends Combo • 146876 Light Granny Apple Green Stampin’ Blends • 144584 Light Rich Razzleberry Stampin’ Blends • 147943 Light Mango Melody Stampin’ Blends • 144595 Light Pool Party Stampin’ Blends • 144608 Stampin’ Blends Color Lifter • 131201 Pear Pizzazz Card Stock • 146926 Share What You Love Designer Series Paper • 100730 Whisper White Card Stock • 144153 Pear Pizzazz Shimmer Ribbon • 119861 1-1/4” Circle Punch • 145372 Stitched Shapes Framelits • 104430 Stampin’ Dimensionals • 102300 Bone Folder • 122334 Simply Scored Scoring Tool • 102210 6” x 8” Cellophane Bags • 138995 Tear & Tape • 143263 Big Shot • 130658 Magnetic Platform

Project Details:

• Pear Pizzazz Card Stock o 5” x 6” two pieces o Stitched Circle

• Share What You Love Designer Series Paper o 3-3/4” x 3-3/4” two pieces o 3-3/4” x 1-1/4” two pieces

• Whisper White Card Stock o Stitched Circle o Scraps for 1-1/4” Circle Punch

Instructions:


1. Score the first piece of Pear Pizzazz card stock at 1” on the 5” side (portrait side).

Turn and score it at 1/2” & 2” on the 6” side (landscape side).

2. Score the 2nd piece of Pear Pizzazz card stock at 1” on the 5” side (portrait). Turn

and score at 4” & 5-1/2” on the 6” side (landscape).

3. Fold on score lines and burnish with Bone Folder.

4. Cut on the solid lines (shown in diagram), add Tear & Tape, and assemble box.

!

!

5. Add the Designer Series Paper to the front, back and sides of box.

6. Stamp kitty with Memento Ink on Whisper White card stock.

7. Color the image with the Stampin’ Blends Markers…

a. Flower Pot: Light Smoky Slate & Color Lifter

b. Kitty: Crumb Cake Combo

c. Flowers: Light Pool Party, Light Mango Melody, Light Rich Razzleberry

d. Leaf: Light Granny Apple Green

8. Cut the image out with the Stitched Shapes Framelits and cut a Pear Pizzazz circle

using the same die.


9. Stamp greeting with Memento Ink. Stamp the heart with Mango Melody Ink, and

cut it out with the 1-1/4” Circle Punch.

10.Add circles to box and pop up greeting with a Stampin’ Dimensional.

11.Add gift to 6” x 8” Cellophane Bag and tie it closed with the Pear Pizzazz

Shimmer Ribbon.

!


Fold Open Shadow Box Card

�

�


Supply List:

• 147067 Broadway Birthday Stamp Set (148321 bundle with dies to save 10%) • 132708 Tuxedo Black Memento Ink • 146277 Broadway Bound Designer Series Paper • 146958 Gold Glimmer Paper • 100730 Whisper White Cardstock • 121045 Basic Black Cardstock • 146281 Candle Embellishments • 126889 Stampin’ Trimmer • 103579 Paper Snips • 102300 Bone Folder • 144107 Take Your Pick Tool • 143263 Big Shot • 146317 Broadway Lights Framelits Dies (148321 bundle with set to save 10%) • 144262 Big Shot Die Brush (optional but helpful) • 141491 Classic Label Punch • 144106 Multipurpose Adhesive Sheets • 138995 Tear & Tape Adhesive • 144108 Mini Dimensionals • 104332 Snail Adhesive • 103683 Glue Dots

Project Details:

• Broadway Bound Designer Series Paper (green & white stripes/gold with white

sparkles) o 5-1/2” x 12” scored at 4”, 7-1/2”, 8” and 11-1/2”

• Gold Glimmer Paper o Scrap for die-cutting marquee o 2” x 5-1/2”

• Whisper White Cardstock o 1-1/4” x 5-1/2” o Scraps for stamping and punching sentiments o Scrap for stamping and die-cutting party hat

• Basic Black Cardstock o Scrap for die-cutting marquee o 1-7/8” x 5-1/2”

Instructions:


1. Stamp “Hooray” on 1-1/4” x 5-1/2” strip of Whisper White cardstock. Stamp two

sentiments and party hat on scraps of Whisper White cardstock. Punch the two

sentiments using the Classic Label Punch. Die-cut the party hat.

2. Keeping green and white stripes on the outside and gold sparkles on the inside,

fold designer paper piece on the score lines to form the card base. Use a Bone

Folder to make the folds crisp. (The last ½” wide section will attach just before the

first 4” score line and be where the designer paper connects to itself. But don’t

attach yet.)

3. Die-cut the marquee between the 8” and 11-1/2” score lines from the card base

designer paper. (Discard the pieces that get cut out.)

4. Die-cut the marquee from the Basic Black scrap. (Discard the middle.)

5. Die-cut the marquee from the Gold Glimmer Paper scrap, but be sure to line up the

die with the white side of the glimmer paper before cutting. (Discard the middle.) This will make it so the holes will not line up when putting the black marquee on

top of the gold marquee. If you die-cut with the gold side against the die, that’s

okay…just flip the black marquee over to get the same effect.

! !

6. Flip the card base over to the gold side. Attach the Gold Glimmer marquee upside-

down inside the window area of the card base by using Tear & Tape Adhesive to

connect this frame to the card base and NOT removing the tape backing.

7. Flip the card base back over to the green and white striped side. Attach the Basic

Black marquee so the holes won’t line up with the holes in the Gold Glimmer


paper marquee. Use Glue Dots to attach, and be careful not to add the Glue Dots

where they will be exposed through the holes of either the gold or black marquees.

! !

8. Add a strip of Tear & Tape Adhesive to the last ½” scored section on the green &

white side of the card base close to the score line. Fold the card inward at the 8”

score line, remove the Tear & Tape backing on that ½” section, and fold the rest of

the card over at the 4” score line to connect with the tape. Make sure it opens

correctly forming a “shadow box” (as shown).

! !

9. Add a strip of Multipurpose Adhesive Sheet to the back (white) side of the 2” x

5-1/2” glimmer paper.

10.Die-cut the sparkles from the center of the 2” x 5-1/2” glimmer paper. Then layer

the stamped 1-1/4” x 5-1/2” Whisper White piece to the 1-7/8” x 5-1/2” Basic

Black using SNAIL, the black to the 2” x 5-1/2” glimmer paper using Glue Dots,

and the glimmer paper to the closed card front using SNAIL.

11.Remove the tiny sticker backings from the little die-cut sparkles, and attach them

to the front of the card to embellish.


12.Open up the card into an L-shape so the window is right above the middle of the

inside of the card. Add the punched sentiments with Mini Glue Dots and SNAIL.

Add a couple Candle Embellishments.

13.Then attach the die-cut party hat to the marquee using Glue Dots.

! !

! !


Happy Birthday with

Gift Card Holder

!


Supply List:

• 145760 Perennial Birthday • 147144 Fresh Fig ink • 147104 Pear Pizzazz ink • 132708 Memento Tuxedo Black ink • 144242 Fresh Fig card stock • 131201 Pear Pizzazz card stock • 100730 Whisper White card stock • 122959 Watercolor Paper • 146276 Stamparatus • 146945 Fresh Fig 3/8” Mini Ruffled Ribbon • 144219 Pearl Basic Jewels • 141491 Classic Label Punch • 103954 Aqua Painters • 133773 Sponge Daubers • 104430 Stampin’ Dimensionals • 104332 SNAIL Adhesive • 138995 Tear & Tape Adhesive

Project Details:

• Fresh Fig card stock o 4-1/4” x 11”

• Whisper White card stock o 4” x 4” (2 pieces)

• Pear Pizzazz card stock o 4-1/8” x 4-1/8” (2 pieces)

• Watercolor Paper o 2” x 6”

Instructions:

1. Score Fresh Fig card stock at 4-1/2”, 5-1/2” & 6-1/2.” Fold & burnish on all score

lines. Create a “W” fold by folding the first and third score lines in opposite

direction.


!

2. Fold 4-1/2” x 4-1/2” panels backward so the ½” piece of cardstock is sticking out.

3. Insert ½” fold halfway into Classic Label Punch and punch to create a slot to place

a gift card inside card.

4. Slide punch to right side leaving a bit of the end of the card sticking out and punch

again. (Try to line up the punch to the best of your ability from where you punched

out the center part of cardstock.) Repeat on left side.

!

5. Use Tear & Tape Adhesive to adhere the middle section together. Be sure to slide in

gift card first to make sure adhesive isn’t impeding gift card from sliding in/out.


6. Set up Whisper White card stock in Stamparatus. Line up “happy birthday” stamp

in the center of card stock at the bottom. Once you have the stamp centered and

straight, ink stamp with Pear Pizzazz and stamp.

7. Move plate up one notch and stamp again without re-inking. Repeat at a notch

higher.

8. Move plate up one more notch, re-ink image, and stamp.

!

9. Use a sponge dauber and pounce it in Pear Pizzazz ink. Remove some of the ink on

a scrap piece of paper. Rub Sponge Dauber in a circle in the center of Whisper

White card stock.

10.Stamp multi dots and leaf image in the center of Whisper White card stock using

Memento Tuxedo Black ink.

11.Adhere Whisper White card stock to a Pear Pizzazz square using SNAIL Adhesive.

12.Stamp the floral images using Memento Tuxedo ink on Watercolor Paper.

13.Using Fresh Fig and Pear Pizzazz ink pads, press the top and bottom of cases

together to create a “pool” of ink on the inside of lid. Then use Aqua Painter to

pick up the ink and watercolor the leaves and flowers. Set aside to dry.

14.After the flowers and leaves are dry, fussy cut using Paper Snips.

15.Adhere to center of Whisper White panel using Stampin’ Dimensionals.

16.Add pearls randomly around flowers.

17.Choose a sentiment to stamp on the other piece of Whisper White card stock.

18.Stamp a flower in the bottom right corner using Fresh Fig and Pear Pizzazz

19.Adhere to other piece of Pear Pizzazz and adhere to inside of card.

20.Place gift card inside.


21.Place a strip of Tear & Tape Adhesive in the middle of the front and backside of

card. Line up and attach 20” of Fresh Fig ribbon to this adhesive. Tie card shut

with a bow.

22.Adhere main stamped panel to front of card using Stampin’ Dimensionals

!


Nothing Sweeter Birthday

Treat Bag

! !


Supply List:

• 147773 Nothing Sweeter • 146667 Itty Bitty Greetings • 145499 Pick A Pennant • 147110 Night of Navy Classic Ink • 147108 Petal Pink Classic Ink • 146284 Twinkle Twinkle Designer Series Paper • 132178 Silver Foil Sheet • 146957 Sparkle Glimmer Paper • 122924 Pool Party Card Stock • 100730 Whisper White Card Stock • 100867 Night of Navy Card Stock • 147918 Sweetly Stitched Framelits • 143745 Coffee Cups Framelits • 143717 Starburst Punch • 133782 2” Circle Punch • 119850 1-3/4” Circle Punch • 141491 Classic Label Punch • 135862 Gift Bag Punch Board • 124262 Whisper White Solid Baker’s Twine • 126889 Stampin’ Trimmer • 103683 Mini Glue Dots • 144108 Mini Stampin’ Dimensionals • 138995 Tear & Tape Adhesive

Project Details:

• Twinkle Twinkle Designer Series Paper o 10” x 6” o 3”x 1-3/8” o 2” square for stamping and fussy cutting gift ribbon from Nothing Sweeter

• Silver Foil Paper o 2-1/2” x 3” for Starburst Punch

• Sparkle Glimmer Paper o 2-1/2” x 3” for 2” Circle Punch

• Pool Party Card Stock o 2-1/2” x 3” for 1-3/4” Circle Punch

• Night of Navy o 2” square for die cutting the gift from Sweetly Stitched Framelits


• Whisper White Card Stock o 1” square for die cutting tiny tag from Coffee Cups Framelits o 1” x 3-1/2” for punching Happy Birthday from Itty Bitty Greetings

Instructions:

1. Using your Gift Bag Punch Board and the 6” x 10” Designer Series Paper, make a

small gift bag according to the directions.

2. Turn the bag around in the Gift Bag Punch Board and score horizontal all the way

across that end of the bag.

3. Turn the paper over (face down) so the other pattern is up. You want the large

section with no gussets on the start line, not the glue tab small section. (See

photograph below.) Punch the far end. Then slide the paper over to line the first

score line on the punch line. Punch again.

4. The two punches have created a flap to close the bag. Using your paper trimmer

cut along the horizontal score line removing all but the flap you made. (See

photograph below.)

!

5. Assemble the bag. The Tear & Tape goes on the smallest vertical panel and on the

bottom front flap to secure the bag.


6. Fold the top flap over the front of the bag closing the bag. Then adhere the second

pattern of Twinkle Twinkle Designer Series paper to the flap. You want to align the

long edge of the paper with the fold at the top of the bag.

7. The second pattern of Designer Series Paper will be longer and wider than the

original flap. Open the flap and trim the excess Designer Series Paper.

8. Close bag and put two Stampin’ Dimensionals on the bag where the flap meets the

body of the bag. Be careful not to catch the flap in the adhesive gluing your box

closed.

9. Adhere the Pool Party 1-3/4” Circle to the Sparkle 2” Circle with Tear & Tape.

Adhere the circles to the Silver Foil Starburst, then adhere the whole thing to the

Stampin’ Dimensionals on the bag. This makes a tuck closure for the bag so it can

be opened and reclosed without damage.

10.Die cut the Night of Navy gift. Stamp the ribbon image on the third pattern of

Twinkle Twinkle Designer Series Paper using Night of Navy ink and fussy cut.

Glue the two pieces together with Multi Purpose Liquid Glue. Adhere to the circles

just high of center with a Stampin’ Dimensional.

11.Stamp “Happy Birthday” on Whisper White and punch out with the Classic Label

Punch. Adhere to the box as shown using a double layer of Mini Stampin’

Dimensionals.

12.Lastly die cut tiny tag from Coffee Cups Framelits out of Whisper White. Stamp

the bitty little heart image from Pick a Pennant using Petal Pink Ink. Thread with

Whisper White Baker’s Twine and tie a thread knot. Adhere to the gift with a Mini

Glue Dot.

Birthday Gift Bag


!

Supply List:

• 146600 Animal Outing stamp set • 146667 Itty Bitty Greetings stamp set • 147143 Berry Burst ink pad • 132708 Memento Tuxedo Black ink • 144243 Berry Burst card stock

• 144245 Lemon Lime Twist card stock • 146902 Animal Expedition designer series paper


• 140272 Whisper White Thick card stock • 126889 Stampin’ Trimmer • 145058 Smoky Slate Stampin’ Blends combo pack • 144580 Bermuda Bay Light Stampin’ Blend • 146876 Granny Apple Green Light Stampin’ Blend • 148324 Animal Outing bundle • 146317 Broadway Lights framelits • 104332 Snail Adhesive • 104430 Stampin’ Dimensionals • 146912 5/8” Polka Dot Tulle ribbon • 134365 1/8” Handheld Circle punch

Project Details:

• Berry Burst card stock o 8” x 11” o Scrap for die-cutting hat piece

• Animal Expedition designer series paper o Two pieces that are 2-3/4” x 6-3/4” o Two pieces that are 1-3/4” x 2-3/4”

• Whisper White Thick card stock o Scraps for stamping and cutting rhino o 1/2” x 3” for sentiment

• Lemon Lime Twist card stock o 1” x 6-3/4” o Scrap for die-cutting hat piece

Instructions:

1. Score 8” x 11” piece of Berry Burst card stock at 2” and 9” on the long side (11”

side). Turn card stock 90 degrees and score at 3” and 5” on the short side (8” side)

2. Trim in on the score lines in the diagram below. Dotted lines indicate where to cut.


!

3. Layer all designer series paper pieces on to the bag. Then punch the holes for the

ribbon straps.

4. Fold both sides of bag up and close by overlapping the side tabs. Tuck the shortest

tab in the center into the inside of the bag. These provide support for the bag, but

aren’t necessary. They can be cut off.

5. Add Lemon Lime Twist card stock strip to the front of the bag.

6. Stamp and color the hippo and stamp the sentiment. Trim the Whisper White card

stock that the sentiment is stamped on in a V-shape/fish tail. Attach the sentiment

strip to the bag using Dimensionals.

7. Add the rhino to the bag using Dimensionals and overlap the sentiment strip.

8. Cut out party hat in both card stock colors, trim out the pom pom piece in Berry

Burst card stock and put it on the top of the hat. Add the hat to the rhino’s head

with glue.

9. Add ribbon to the bag through the holes and tie a knot in the ends of the ribbon to

hold them onto the bag.

!


Birthday Gift Card Holder

!


!

Supply List:

• 145757 Perennial Birthday stamp set – wood mount • 145760 Perennial Birthday stamp set – clear mount • 132708 Memento Black ink • 131297 Coastal Cabana card stock • 100730 Whisper White card stock • 121045 Basic Black card stock • 146964 Brights 6” x 6” designer paper • 146957 Sparkle Glimmer paper • 119860 1-¼” Circle punch • 144220 Clear Rhinestones • 141708 Layering Square Framelits • 143700 Happy Birthday Thinlits • 143263 Big Shot

Project Details: Stampin’ Anonymous Tutorials ©Stampin’ UP!

• Coastal Cabana card stock o 4” x 5-1/4” o Scrap for die-cutting Layering Square Framelits

• Whisper White card stock o 2-¾” x 4” (front) o 2-¼” x 4” (inside pocket) o 4” x 5-¼” (inside) o Scrap for die-cutting Layering Square Framelits

• Brights 6” x 6” Designer paper o 2-½” x 3-¾” (front) o 2” x 3-¾” (inside pocket) o 1” x 3-¾” (inside)

Instructions:

1. Score your 4-¼” x 11” Coastal Cabana at 2-½” and 5-½”. Fold on score lines with

the small flap folding inside of card.

2. Adhere 2-½” x 3-¾” Brights Designer Paper to 2-¾” x 4” Whisper White layer for

the front of your birthday card. Then adhere 2” x 3-¾” Brights Designer Paper to

2-¼” x 4” Whisper White layer for the inside pocket of your birthday card. Adhere

1” x 3-¾” Bright Designer Paper to 4” x 5-¼” Whisper White for the inside main

layer.

!


3. Before adhering your pieces to the card base, form the gift card pocket first. Using

your 1-¼” circle punch cut a half of a circle on the 2-½” scored end to make a

finger hole for the gift card pocket.

4. Adhere the inside pocket white/designer paper layers, then flip coastal Cabana base

over and line 1-¼” circle punch up with previous punched area and re-punch so

layers match to form a finger hole. This way the receiver of gift card can pull gift

card out of pocket. (shown in photos)

!

5. Adhere the sides of pocket down with adhesive. Gift card should slide into pocket

easily. And adhere the other two layered pieces to card.

6. Die cut a Whisper White Scallop Square and a Coastal Cabana 2-5/8” x 2-5/8” size

square using the Layering Squares Framelits. Attach to card.

7. Die cut Happy Birthday Thinlits from Basic Black card stock and Sparkle Glimmer

paper and then layer the Basic Black behind the Sparkle Glimmer paper with Snail

adhesive to give it a layered shadow effect. (shown in photos) Add to card.

!

8. Stamp greeting inside and add Basic Rhinestones for added sparkle to your

birthday gift card holder. The gift card pocket can also hold cash instead of a gift

card if you wish.


Stampin’ Anonymous...2018/12/12 · gift card first to make sure adhesive isn’t impeding gift...

Documents

Transcript of Stampin’ Anonymous...2018/12/12 · gift card first to make sure adhesive isn’t impeding gift...