Stainless Steel Specialties - Indianapolis · A complete range of stainless steel traps are...
Transcript of Stainless Steel Specialties - Indianapolis · A complete range of stainless steel traps are...
Stainless Steel Specialty ProductsFor the efficient control and conditioning
of clean steam, condensateand process fluids
2
Maintaining quality and purity of a clean steam systemis an essential ingredient to product excellence
The use of clean or pure steam to reduce the risk of product or process contamination spans manyindustries and applications, including:
● Pure steam for sterilization of equipment in the biotechnology and pharmaceutical industries● Culinary steam for direct cooking and heating of foods● Clean steam for humidification of clean rooms● Filtered steam for hospital sterilizers
For all these uses, Spirax Sarco offers a range of products and services to help optimize systemperformance and ensure product excellence.
Pure Water
Plant Steam
Condensate
Condensate
Condensate
Clean SteamDistribution Main
Pure/Clean SteamGenerator
Separators andfilters for efficient
conditioning of steam.
Mains drip traps for distribution system
condensate removal.
Steam trapsfor effective drainagewith minimal backup.
Spirax Sarco solutions inthe clean steam system
3
● Single source supplier for clean steam needs.
● Stainless steel construction for long life andreduced contamination risk.
● Sanitary designs for the more critical processapplications, minimizing biocontaminationand increasing productivity.
● Wide range of end connections, compatiblewith sanitary tubing and piping systems.
● Compact designs, convenient for reducedspace requirements.
● Reduced maintenance costs.
User benefits
● Effective control of clean and pure steam,condensate, and other high purity fluids.
● Improved product quality with minimizedrisk of contamination and loss.
● Reduced environmental emissions due toeffective steam trapping.
Condensate
ProcessVessel
Diaphragm Valves
Regulatorsfor accurate
pressure control.
The need for stainless steel specialty productsEfficient design of clean steam systems and correct component selection prevents:● Expensive product loss● Back-up of condensate, with subsequent product and system contamination● Excessive corrosion and rouging of the steam and process systems● Ineffective condensate removal and control● Reduced process system efficiency● High maintenance costsAll too often, these problems are just accepted simply because no readily available solution exists.
Process steam traps foreffective contaminated condensate drainage.
Note: All diagrams contained in this brochure are schematicrepresentations only—not to be used for construction.
4
Effective Condensate DrainageBioreactor/tank outlet and sterile
barrier creates effective condensatedrainage during both routine sterilization
and sterile barrier operations.
Typical applications for stain
Pressure RegulationStation designed for optimum pressure
reduction and increased regulator life forlow pressure, high purity systems.
Sterile Barriers/Block and Bleed Systems
Sterile barrier/block and bleed stations usespecially designed traps to prevent
blockage and subsequent back-up ofcondensate even when process
fluids are present.
Process Piping Sterilizationwith Mains Drip
Sterilization of process piping/mains dripprovides clean, saturated steam to process
piping for sterilization and efficiently removescondensate which may be contaminated with
process fluids and/or CIP solutions.
5
less steel specialty products
CIP/SIP SystemsMany installed CIP/SIP systems use a manual/automated by-pass system with
relatively low capacity steam traps to control the flow of cleaning fluid and condensate.It can be seen from the above diagrams that there are significant pipework
savings when using a BT6HC instead of the traditional system.The BT6HC can be used on a variety of applications within clean steam and
hygienic systems. Its high cold capacity makes it an excellent choice for joint CIP/SIPsystems and also for drainage of large process vessels where initial condensate
and air volumes are very high but normal running loads are low.
Filtered SteamA filtered steam station produces steam to be
used for direct injection into food products, culinarysteam, or for use in sterilizers and autoclaves.
Traditionalsystem
System usingBT6HC only
BT6HC
A complete range of stainless steel traps are available from Spirax Sarco to suit all applications and operating environments.Manufactured in the highest quality corrosion resistant 316L stainless steel materials, Thermostatic and Thermo-Dynamic® trapscan be supplied with a wide range of end connections for use in either tubing or piping systems.
Thermostatic TrapsThermostatic traps are most widely used in process applications,
as they can be designed to be freedraining and operate close to steamtemperature at any given pressure.A large orifice helps eliminate thepossibility of fouling in the presenceof contaminated condensate orcleaning solutions, while minimalcondensate retention and excellentair venting capabilities associatedwith thermostatic traps ensurerapid heat-up and optimumsterilization.
Thermo-Dynamic® TrapsThermo-Dynamic® traps are
more suited to constant pressureapplications, where smallamounts of uncontaminatedcondensate are present, suchas in steam main drainageapplications.
Whatever the application,Spirax Sarco has a wide rangeof trap products available for use inboth Clean Steam and ProcessSystems.
6
Steam Traps
● Complete range of clean steam productsavailable from the world’s leading supplier.
● Products designed specifically for clean steamand process systems ensures optimum systemintegrity.
● Various end connection configurations allow simpleinstallation in both tubing and piping systems.
● Compact elements common to thermostatic traprange for simplified maintenance and reducedspares inventories.
● High levels of surface finish as standard helpseliminate the possibility of product fouling.
● Actual material certification available on certaintrap models.
User benefits
Typical Applications
● Fermentors● Bioreactors● Sterilizers/Autoclaves● CIP/SIP Systems● Process Piping● Equipment Sterilization● Block & Bleed● Sterile Barriers
Various internal surfacefinishes available to suit
all applications.
All 316L wetted partsfor optimum corrosion
resistance.
Self draining designeliminates retention ofcondensate or product.
A range of standardend connections
simplifies installation.
Wide range ofmaintainable and sealed
traps available from asingle manufacturer.
BT6 Steam Trap
The BT6 Thermostatic steamtrap offers a polished 316Lstainless steel finish for maximum corrosion resistance.Quick release Tri-Clamp®
compatible end connectionsand center body clamp assuresease of maintenance, reduces downtime and provides compatibility with other processsystem components. Typicalapplications for the BT6 includesterile barriers, process vesselsterilization, and CIP/SIP systems. The BT6 is availablewith actual material certificationas standard.
BT6Steam Trap
7
BT6HC Steam Trap
The BT6HC is a high capacityprocess thermostatic steamtrap of all polished 316Lstainless steel construction.Tri-Clamp compatible endconnections and a two-piecedesign assures ease ofinstallation and maintenance.Specially designed for CIP/SIPsystems, the trap handles CIPsolutions, high condensateloads, and large amounts ofair while simplifying thepipework design.
BT6HC BT6 BTM7/BTS7 BTD52L FT16 FT46Sizes 1",11/2" 1/2", 3/4", 1" 1/4", 1/2", 3/4", 1" 1/4", 3/8", 1/2" 1/2", 3/4" 1/2", 3/4", 1", 1-1/2", 2"
Construction 316L stainless 316L stainless 316L stainless steel 316L stainless 316L stainless steel body,steel body and steel body and body and internals steel stainless steel internalsinternals internals
Internal body Internal body finish – 32 finish – 8-32microinch Ra microinch Ra
Connections Tri-Clamp® Tri-Clamp® 0.065" extended 0.065" extended NPT ANSI 300,150compatible compatible O.D. Tube (1/2", O.D. Tube
3/4", 1" only), (1/2" only)NPT, or Tri-Clamp® NPT, or Tri-Clamp®
compatible (1/2", compatible3/4", 1" BTM7 only) (1/2" only)
Maximum FT16/46-4.5: 65 psigOperating 87 psig 88 psig 102 psig 150 psig FT16/46-10: 145 psig FT46-21:Pressure FT16/46-14: 200 psig 300 psig
MaximumOperating Saturated steam Saturated steam 45˚F of superheatTemperature temperature temperature 850˚F at all operating pressures
Options N/A Fixed bleed, Other connections BSP connections, 3/8" NPT drain plugare available upon request Insulcap
TIS # 2.015 2.000 2.0002 2.518 2.318 2.319
FT16 /FT46 Steam Trap
The FT16 and FT46 are high capacity traps designed forapplications requiring continuous drainage of high condensate loads in cleansteam systems.These float andthermostatictraps preventback-up andmaximizeprocess efficiency. Athermostatic air ventefficiently removes airand other incondensiblegases, maximizing heattransfer; therefore,reducing heat up times.
BTM7/BTS7 Steam Traps
The BTM7 (maintainable) and BTS7(sealed) are constructed of 316L stainless steel in a lightweight,compact design allowingeasy installation at lowinitial cost. The BTM7and BTS7 are availablewith screwed, extendedtube end, or Tri Clamp®
compatible end connectionsfor use in either tubing or piping sys-tems. Typical applications include sterilizers, autoclaves, and block andbleed systems.
BTD52L Steam Trap
The compact BTD52L Thermo-Dynamic® steam trap is available in a wide range of sizes with screwed, Tri-Clamp®
compatible or extended tube endconnections. Clean, tight shut-off at steam saturationtemperature without awater seal eliminateswaste of valuable cleansteam. Typical applications includemains drainage, andin-line filter sterilization. Actualmaterial certification isavailable as standard forthe BTD52L tube end and Tri-Clamp®compatible versions.
8
Pressure Regulators
● Accurate control of pressure foroptimum process control.
● Trouble free operationeven under vacuum conditions.
● All wetted parts are electropolished316/316L stainless steel to resistcorrosion.
● Rugged yet lightweight constructionreduces installation costs.
● Tri-Clamp® compatible connectionsfor cleanliness and ease of removal.
SRV6 User benefits
In order to overcome steam main heat losses,reduce the pipework size, and ensure optimumgeneration efficiency, pressure in a system isnormally higher than that required by individualuser equipment.
To satisfy the requirements of these users,a pressure regulator must be used to reducepressure either within the distribution system,or at each point of use.
The SRV6 Pressure Regulator
The SRV6 is a direct acting regulatordesigned to reduce pressure in clean and puresteam, liquid and gas systems. Available in 1",1-1/2" and 2" sizes, the SRV6 is manufactured in316/316L stainless steel, with all wetted partsmechanically polished to 20 microinches Ra, thenelectropolished. The angle pattern design ensuresthat the valve is self draining, while Tri-Clamp®
compatible connections ease removal and ensurecleanliness. Diaphragm restraints and valve travelstop, which are standard features, preventsexcessive diaphragm movement under vacuumconditions, which extends service life and reducesmaintenance costs.
How the SRV6Pressure Regulator Works
Downstream pressure is set by compressingthe control spring. On start-up, flow passesthrough the main valve resulting in a downstreampressure buildup. As the downstream pressurebegins to rise it acts on the underside of thediaphragm, opposing the spring force and causingthe main valve to move closer to its seat. Thismovement throttles the flow, ensuring that thedownstream pressure is accurately controlled atthe desired set point.
All stainless steel polishedexternal surfaces for
ease of cleaning.
Main valve profiledesigned for high
accuracy of control.
Single spring rangesimplifies selection.
V-Band clampfor ease of
maintenance.
Reinforced diaphragmfor optimum service life.
Angle pattern ensuresfree draining.
Typical Applications● Sterilizers ● CIP/SIP Systems● Autoclaves ● Process tanks● Bioreators ● Humidifiers● Centrifuges ● Culinary equipment● Freeze dryers
SRV6PressureRegulator
9
SRV461/463Pressure Regulator
The simple and accurate pressurecontrolling SRV461(threaded)/463 (flanged)regulators with 316 Ti wettedparts ensure corrosionresistance against aggressivesteam and process fluids. Thevalve head is supplied with a soft O-ring seal for tight shut off on steam andliquid service. The SRV461/463 rangeis available in sizes 1/2" to 2".
DP163 Pressure Regulator
The DP163 is a self-powered, pilot operated,pressure reducing valve constructed entirelyof stainless steel. Its self-acting operationeliminates the cost of an external powersource. Color coded, interchangeablesprings allow quick and easy change ofdownstream pressure range eliminatingthe need to isolate the valve or break thesteam line. Downstream pressure issensed either internally or through anexternal sensing pipe. The DP163 isavailable in sizes 1/2" to 3" withflanged connections. Typicalapplications include main line pressurereduction or where high accuracy ofcontrol is required.
SRV2 Pressure Regulator
The SRV2 is a direct actingpressure reducing valve with all316/316L wetted componentssuitable for use in steam,compressed air and othergas services. The compactdesign of the SRV2 makesit ideal for point of useapplications such assterilizers and autoclaves,offering a cost effectivealternative to morecomplicated pilot or pistonoperated valves. The SRV2is available with threadedconnections in 1/2", 3/4" and 1"sizes. Three control spring rangesallow operation over a wide span ofdownstream pressures.
SRV6 SRV2 SRV461 and 463 DP163Sizes 1", 1-1/2", 2" 1/2", 3/4", 1" 1/2", 1", 1-1/4", 1-1/2", 2" 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 3"Construction 316/316L Stainless steel wetted parts 316L Stainless Steel 316 Ti stainless steel, 316L stainless steel body
mechanically polished to 20 EPDM diaphragm Stainless steel internalsmicroinch Ra then electropolished
External parts electropolishedPTFE faced viton diaphragm
Connections Tri-Clamp® compatible NPT NPT (461), ANSI 150 (463) ANSI 300MaximumOperating 116 psig 275 psig 174 psig 304 psigPressureMaximumOperating 347°F 413°F 374°F 432°FTemperature 266°F with soft valve trimMaximum Cv 1" 5.5 1/2" 1.8 1/2" 4.7 1-1/4" 14.0 1/2" LC 1.1 1-1/4" 14.0
1-1/2" 13.5 3/4" 2.9 3/4" 5.9 1-1/2" 18.7 1/2" 3.2 1-1/2" 19.82" 27 1" 3.5 1" 7.0 2" 21.1 3/4" 6.4 2" 32.7
1" 9.4 3" 78.8Downstream 7-75 psi 2-25 psi,20-60 psi 4-16 psi, 12-36 psi 3-45 psi, 40-100 psiPressure Range 50-125 psi 30-75 psi 90-250 psi, 230-304 psiOptions Soft seat (SRV6G) BSP Connections BSP, DIN PN16, BS, DIN or
or BS4504 Connections ANSI 150 connectionsNon-standard pressure ranges Soft seat (DP163G)Soft seat (461S & 463S)
TIS # 3.111 3.108 3.110 3.080, 3.081, 3.082
Additional Stainless SteelPressure Regulators
In addition to the SRV6, Spirax Sarco offers acomprehensive range of stainless steel regulatorssuitable for steam, gas and liquid service. Thisrange of products is designed to withstand serviceconditions that are common in applications suchas sterilizers, autoclaves, culinary equipment andhumidifiers.
10
● Cleanable element reduces total cost of ownership.
● Complete filter stations available from one sourceensures equipment compatibility.
● Filter and filter stations conform to 3-A AcceptedPractice Number 609-00.
● Effective moisture and particle separation foroptimum processing efficiency.
● Compact design for ease of installation andmaintenance.
User benefits CSF26Sizes 1/2", 3/4", 1", 1-1/2", 2", 2-1/2", 3"
Construction Type 316 stainless steel polished externally2.8 micron 316L stainless steel filter element
Connections NPT (1/2" - 2"), ANSI 150 ( 2-1/2" and 3")
MaximumOperating 150 psigPressure
MaximumOperating 366˚FTemperature
Options Tri-Clamp® compatible connections4" and 6" sizes available on request
TIS # 7.005
Steam Filters
Loss of production, incomplete sterilization,or product contamination are all conditions thatcan result from poor steam quality and purity.Spirax Sarco steam filters are designed to helpeliminate these costly and avoidable occurrencesby ensuring both moisture and solid contaminantparticles, such as pipe scale and rust, are filteredfrom the steam supply.
The CSF26 Steam FilterThe CSF26 Steam Filter is an all 316L
stainless steel unit with a removable sinteredstainless steel element available in sizes up to3". A single closure device allows for ease ofmaintenance, while a cleanable element ensuresoptimum efficiency and prolonged life.
Available TypesAvailable in a range of sizes from 1/2" to 3",
the CSF26 is supplied with a 2.8 micron absoluterated element. Also available, are complete filterstations which are in accordance with 3-Aaccepted practice guidelines. Each filter stationincludes a separator, strainer, auxiliary productsand steam filter, which when used in combinationensure efficient steam filtration and prolongelement life.
Typical Applications● Hospital Sterilizers● Autoclaves● Direct Injection Food Processing● Product Curing
Push fit bayonetconnection with
double O-ring sealfor high security and
ease of elementremoval.
Drain connectionfor condensate
removal.
Single closuredevice
simplifiesmaintenance.
All stainless steel bodyfor long life.
Polished external surfacefor ease of cleaning.
Sintered stainless steelelement allows
effective cleaning.
Removable plug forinstallation of air vent.
11
S6 & 1808 SS SeparatorSeparators remove moisture fromsteam and gas systems byproviding a drain point for waterdroplets moving along the pipe walland deflecting suspended moistureout of the main flow. The separatortherefore ensures steam/gas isdelivered to its point of use dry —particularly important for equipmentsuch as sterilizers. High efficiencyat wide ranges of flow rates alsominimizes the effects ofcondensate such as erosion,corrosion and wiredrawing ofvalve seats.
Auxiliary Products
● Improves process plant productivityand product quality.
● Reduces maintenance costs anddown time.
● Increases plant and control valve lifeon steam and air systems.
● Removes risk of waterhammerdamage and subsequentmaintenance bills.
● Simple, robust and efficient separatordesign. Requires no maintenance.
User benefits
All 316L stainless steelconstruction for optimum
corrosion resistance.
1808Sizes 2 1/2", 3", 4", 6"
Construction Fabricated 316L stainless steel
Connections ANSI 300
MaximumOperating 2 1/2" 367 psig/437°FPressure 3", 4" 294 psig/414°F& Temperature 6" 441 psig/455°F
Options ANSI 150 connections
TIS # 7.003
Large internal volumeto reduce flow velocity,
providing efficientmoisture separation and
reducing the risk ofmoisture re-entrainment.
Large impact area andbaffles to capture allmoisture droplets.
S6Sizes 1/2" - 2"
Construction Cast 316L stainless steel
Connections NPT, SW, ANSI 150 & 300flanged
MaximumOperating NPT, SW 600 psig/489°FPressure ANSI 150 210 psig/392°F& Temperature ANSI 300 600 psig/489°F
Options N/A
TIS # 7.006
SC 20 Sample Cooler The SC 20 is used to take samplesfrom clean high purity steam andwater systems, preventing“flashing-off” or high temperatureswhich can be dangerous and couldresult in an inaccurate sample. Its316L stainless steel construction withcounter current flow providesaccurate, contamination free samples.The compact, maintenance-freedesign makes it ideal for eitherpermanent or mobile installation.
● 316L stainless steel for long lifeand contamination free samples.
● Counter current flow for efficientcooling.
● Pipe configuration ensures thatcoil is always immersed in coolingwater.
● Compact and maintenance freedesign.
User benefits
Compact design idealfor mobile installations.
Tube and Tri-Clamp®
compatible connectionoptions for simplified
installation.
Continuous coilminimizes risk of sample
contaminations.
All 316L stainless steelconstruction for optimum
system integrity.
SC 20
Sizes 1/4" coil, 1/2" body
Construction Type 316L stainless steel
Connections Coil: O.D. tube or 1/2" Tri-Clamp®
compatible (inlet only)Body: NPT
Maximum Operating Coil: 464 psiPressure Body: 145 psi
Maximum Operating Coil: 572˚FTemperature Body: 212˚F
TIS # 10.3705
Auxiliary Products
Regional Offices
1150 Northpoint Blvd.Blythewood, SC 29016Phone: (803) 714-2000Fax: (803) 714-2222www.spiraxsarco.com/usPrinted in USA 2/03. Copyright 2003 Spirax Sarco, Inc.
NortheastSpirax Sarco, Inc.7760 Olentangy River RoadSuite 120Columbus, OH 43235Phone: (614) 436-8055Fax: (614) 436-8479
Spirax Sarco, Inc.209 W. Central StreetSuite 228Natick, MA 01760Phone: (508) 651-3200Fax: (508) 655-9434
Mid-AtlanticSpirax Sarco, Inc.4647 Saucon Creek Road Suite 102Center Valley, PA 18034Phone: (610) 432-4557Fax: (610) 432-2595
SoutheastSpirax Sarco, Inc.200 Centre Port DriveSuite 170Greensboro, NC 27409Phone: (336) 605-0221Fax: (336) 605-1719
MidwestSpirax Sarco, Inc.2806 Centre Circle DriveDowners Grove, IL 60515Phone: (630) 268-0330Fax: (630) 268-0336
SouthwestSpirax Sarco, Inc.203 Georgia AvenueDeer Park, TX 77536Phone: (281) 478-4002Fax: (281) 478-4615
WestSpirax Sarco, Inc.1930 East Carson StreetSuite 102Long Beach, CA 90810Phone: (310) 549-9962Fax: (310) 5549-7909
Indianapolis ● Chicago ● San Juan www.hollandapt.com
800-800-8464