STAINLESS STEEL PRODUCT GUIDE - TLVstainless steel as their first choice. Easily recyclable,...
Transcript of STAINLESS STEEL PRODUCT GUIDE - TLVstainless steel as their first choice. Easily recyclable,...
For Higher Performance and Resource Preservation...
Sanitary
CorrosionResistant
Long Life
Environmentally-friendly Stainless Steel
Corrosion-resistance and long life vital to sanitary applications.
Stainless steel is the material of choice for industries that require sanitary conditions such as food, pharmaceutical and bio-technology. Nuclear power plants, constantly seeking reliability, long life and energy savings also look to stainless steel as their first choice. Easily recyclable, stainless steel is the most environmentally-friendly material available, offering minimum life cycle costs.
In order to make high-quality products the customer can trust, TLVnot only uses stainless steel for its products, but also provides innovative solutions to extend product quality and life.
Innovation for Even Longer Product Life
Free Float 3-Point Seal* * Not available for some products
Free Float steam traps have only one moving part, the float. Three-point seating ensures a steam-tight seal.
Free Float Steam traps have no levers or hinges, and only one moving part, the free float, meaning less wear and longer service life. In addition, three-point seating ensures a steam tight seal even with low condensate loads.
Free Float
Free Float Steam Traps
Scale Removal Function
Temperature control traps used on tracer lines often get clogged with scale from tracer tubing and thrown away. For those applications, the scale removal function can quickly and easily clean the source of the clogging from the orifice to increase product life and trap reliability.
Temperature Control TrapLEX3N-TZ
Pressure Reducing ValveCOS Series
By combining a cyclone separator and a pressure reducing valve, condensate and scale are removed, extending product life.
The cyclone separator incorporated in the COS series pressure reducing valves removes not only condensate, but also extends product life by removing dirt and scale that are the source of failures. Furthermore, the separator provides high-quality dry steam to increase production efficiency.
Cyclone Separator
Remove scale from the valve seat without disassembly by tightening the temperature control adjusting screw.
SS/FS/JH Series
Scale-cloggedValve Seat
Valve SeatAfter Cleaning
Cyclone Separator
DrySteam
≤ 2.1 MPaG ≤ 4.6 MPaG ≤ 2.1 MPaG ≤ 3.2 MPaG
≤ 3.2 MPaG ≤ 12 MPaG ≤ 0.6 MPaG ≤ 2.1 MPaG
Steam TrapsFor process equipment, steam lines to steam tracers, TLV has innovative stainless steel
steam traps to meet any customer needs.
SS1 Series
JX/JH-X Series JH-B/JH-P Series
SS3/SS5 Series FS QuickTrap Series
Clean Steam Traps LEX3N-TZ
L Series
Free Float Free Float
Free Float Free Float
Free Float
3-Point Seal 3-Point Seal 3-Point Seal
3-Point Seal* 3-Point Seal*
Scale RemovalFree Float*
Featuring an automatic bimetal air vent
and a free float, the SS1 is a durable
energy-efficient steam trap with a long
service life.
Featuring three-point seating, this steam
trap provides a steam-tight seal even
with low condensate loads. The SS3/SS5
also feature an integral automatic
bimetal air vent for fast start-up.
The automatic X-element vents cold air at
start-up and hot air during operation for
increased process efficiency.
The automatic air vent (JH-B Series) or a
cover plug (JH-P Series) is effective for the
highest pressures.
The FS Series features a free float trap
installed on a 2-bolt universal flange
connector for easy installation and
replacement in both vertical and
horizontal piping.
The L Series rapidly discharges low temperature
condensate and air for rapid start-up, and discharges
hot air during operation. The large orifice reduces
blockage from scale build-up.
Clean Steam Traps are easy to disassemble,
don't accumulate condensate, and
discharge all condensate to protect against
contamination.
The LEX3N-TZ helps sustain fluid
temperature in oil lines, tracer lines, and
other applications. With a scale removal feature, the
LEX eliminates concerns about clogged traps.
Note: For use only on some applications utilizing sensible heat of condensate. See Pamphlet or SDS for further details.
1) Connection: S = Screwed, W = Socket Weld, F = Flanged, C = Clamp End, T = Tube End 2)
PMO: Maximum Operating Pressure (1 MPa = 10.197 kg/cm2) 3) TMO: Maximum Operating Temperature
Full product details (sizes, pressures, capacities and materials) are included in the individual specification data sheets (SDS). Some models are optional and may not be shown on the SDS, contact TLV for details.
4) Finishing: B = Buff-polished, E = Electro-polished
To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.CAUTION
* Except JH7.5R-X and JH8R-X * Except JH7.5R-B, JH7.5R-P,JH8R-B and JH8R-P
* SS5(E)P Only
S, W, FS, W, FW, FS, W, FW, FS, W, FW, FW, FW, FW, F
15, 20, 2515, 20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 5020, 25, 40, 5020, 25, 40, 5015, 20, 2540,50,80
50, 80, 100
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
3.24.56.5
4.6/6.58.04.66.5
10/124.63.5
350425425425425425425
425/540425390
450710160710125
3800770
610/4451300026000
JH3S-BJH5SL-B/JH5SL-PJH5SH-B/JH5SH-PJH5RL-B/JH5RL-PJH5RH-B/JH5RH-PJH7RL-BJH7RM-B/JH7RM-PJH7RH-B/JH7RH-PJH7.5R-B/JH7.5R-PJH8R-B/JH8R-P
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, FS, W, FS, W, FS, W, FW, FW, F
15, 20, 2515, 20, 25, 40, 5015, 20, 25, 40, 5020, 25, 40, 50
40, 50, 8050, 80, 100
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
3.23.23.23.23.23.2
240240240240240240
630100010004080
1380026000
JH3S-XJH5SL-XJH5EL-XJH7RL-XJH7.5R-XJH8R-X
Connection1)
Size (mm) Material PMO2)
(MPaG)TMO3)
(ºC)
Discharge Cap. (kg/h)
Model
S, W, FS, W, F
15, 20, 2515, 20, 25
A351 Gr.CF8A351 Gr.CF8
2.12.1
220350
205205
SS1NL/SS1VLSS1NH/SS1VH
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, FS, W, FW, F
15, 20, 2515, 20, 2515, 20, 25
SUS316LSUS316LSUS316L
2.13.24.6
400425425
310800240
SS3N/SS3VSS5N/SS5VSS5NH/SS5VH
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, F S, W, F S, W, F
15, 20, 2515, 20, 2515, 20, 25
SUS316LSUS316LSUS316L
2.13.24.6
400400425
215 670 240
FS3FS5FS5H
Size (mm) Material Discharge Cap. (kg/h)
Model
SS, W, FS, W, F
8, 10, 1515, 20, 2515, 20, 25
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
2.12.13.2
235235240
680770/660530/470
LV21L21S/L21SCL32S/L32SC
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, F 10, 15, 20, 25 A351 Gr.CF8 2.1 350 310LEX3N-TZ
Size (mm) Material Discharge Cap. (kg/h)
Model
C, TC, TC, TC, TC, TC, T
15, 20, 2515, 20, 2515, 20, 2515, 20, 25
25, 3825, 38
SUS316LSUS316LSUS316LSUS316L
A351 Gr.C3FMA351 Gr.C3FM
0.60.60.60.60.60.6
165165165165165165
770770770770530530
LV6CELV6SFLV6PLV6EPSS5PSS5EP
Connection1)
Size
(mm)Material Discharge
Cap. (kg/h)Finishing4)
(μm)Internal/External
Model
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
PMO2)
(MPaG)TMO3)
(ºC)
S, FS, F
15, 20, 2520, 25, 32, 40
A351 Gr.CF8A351 Gr.CF8
2.12.1
220220
7601020
J3S-XJ5S-X
SS3V
SS3NFS3
JH3S-X
LEX3N-TZ
JH7RM-P
≤ 2.1 MPaG ≤ 4.6 MPaG ≤ 2.1 MPaG ≤ 3.2 MPaG
≤ 3.2 MPaG ≤ 12 MPaG ≤ 0.6 MPaG ≤ 2.1 MPaG
Steam TrapsFor process equipment, steam lines to steam tracers, TLV has innovative stainless steel
steam traps to meet any customer needs.
SS1 Series
JX/JH-X Series JH-B/JH-P Series
SS3/SS5 Series FS QuickTrap Series
Clean Steam Traps LEX3N-TZ
L Series
Free Float Free Float
Free Float Free Float
Free Float
3-Point Seal 3-Point Seal 3-Point Seal
3-Point Seal* 3-Point Seal*
Scale RemovalFree Float*
Featuring an automatic bimetal air vent
and a free float, the SS1 is a durable
energy-efficient steam trap with a long
service life.
Featuring three-point seating, this steam
trap provides a steam-tight seal even
with low condensate loads. The SS3/SS5
also feature an integral automatic
bimetal air vent for fast start-up.
The automatic X-element vents cold air at
start-up and hot air during operation for
increased process efficiency.
The automatic air vent (JH-B Series) or a
cover plug (JH-P Series) is effective for the
highest pressures.
The FS Series features a free float trap
installed on a 2-bolt universal flange
connector for easy installation and
replacement in both vertical and
horizontal piping.
The L Series rapidly discharges low temperature
condensate and air for rapid start-up, and discharges
hot air during operation. The large orifice reduces
blockage from scale build-up.
Clean Steam Traps are easy to disassemble,
don't accumulate condensate, and
discharge all condensate to protect against
contamination.
The LEX3N-TZ helps sustain fluid
temperature in oil lines, tracer lines, and
other applications. With a scale removal feature, the
LEX eliminates concerns about clogged traps.
Note: For use only on some applications utilizing sensible heat of condensate. See Pamphlet or SDS for further details.
1) Connection: S = Screwed, W = Socket Weld, F = Flanged, C = Clamp End, T = Tube End 2)
PMO: Maximum Operating Pressure (1 MPa = 10.197 kg/cm2) 3) TMO: Maximum Operating Temperature
Full product details (sizes, pressures, capacities and materials) are included in the individual specification data sheets (SDS). Some models are optional and may not be shown on the SDS, contact TLV for details.
4) Finishing: B = Buff-polished, E = Electro-polished
To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.CAUTION
* Except JH7.5R-X and JH8R-X * Except JH7.5R-B, JH7.5R-P,JH8R-B and JH8R-P
* SS5(E)P Only
S, W, FS, W, FW, FS, W, FW, FS, W, FW, FW, FW, FW, F
15, 20, 2515, 20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 5020, 25, 40, 5020, 25, 40, 5015, 20, 2540,50,80
50, 80, 100
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
3.24.56.5
4.6/6.58.04.66.5
10/124.63.5
350425425425425425425
425/540425390
450710160710125
3800770
610/4451300026000
JH3S-BJH5SL-B/JH5SL-PJH5SH-B/JH5SH-PJH5RL-B/JH5RL-PJH5RH-B/JH5RH-PJH7RL-BJH7RM-B/JH7RM-PJH7RH-B/JH7RH-PJH7.5R-B/JH7.5R-PJH8R-B/JH8R-P
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, FS, W, FS, W, FS, W, FW, FW, F
15, 20, 2515, 20, 25, 40, 5015, 20, 25, 40, 5020, 25, 40, 50
40, 50, 8050, 80, 100
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
3.23.23.23.23.23.2
240240240240240240
630100010004080
1380026000
JH3S-XJH5SL-XJH5EL-XJH7RL-XJH7.5R-XJH8R-X
Connection1)
Size (mm) Material PMO2)
(MPaG)TMO3)
(ºC)
Discharge Cap. (kg/h)
Model
S, W, FS, W, F
15, 20, 2515, 20, 25
A351 Gr.CF8A351 Gr.CF8
2.12.1
220350
205205
SS1NL/SS1VLSS1NH/SS1VH
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, FS, W, FW, F
15, 20, 2515, 20, 2515, 20, 25
SUS316LSUS316LSUS316L
2.13.24.6
400425425
310800240
SS3N/SS3VSS5N/SS5VSS5NH/SS5VH
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, F S, W, F S, W, F
15, 20, 2515, 20, 2515, 20, 25
SUS316LSUS316LSUS316L
2.13.24.6
400400425
215 670 240
FS3FS5FS5H
Size (mm) Material Discharge Cap. (kg/h)
Model
SS, W, FS, W, F
8, 10, 1515, 20, 2515, 20, 25
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
2.12.13.2
235235240
680770/660530/470
LV21L21S/L21SCL32S/L32SC
Size (mm) Material Discharge Cap. (kg/h)
Model
S, W, F 10, 15, 20, 25 A351 Gr.CF8 2.1 350 310LEX3N-TZ
Size (mm) Material Discharge Cap. (kg/h)
Model
C, TC, TC, TC, TC, TC, T
15, 20, 2515, 20, 2515, 20, 2515, 20, 25
25, 3825, 38
SUS316LSUS316LSUS316LSUS316L
A351 Gr.C3FMA351 Gr.C3FM
0.60.60.60.60.60.6
165165165165165165
770770770770530530
LV6CELV6SFLV6PLV6EPSS5PSS5EP
Connection1)
Size
(mm)Material Discharge
Cap. (kg/h)Finishing4)
(μm)Internal/External
Model
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
Connection1)
PMO2)
(MPaG)TMO3)
(ºC)
PMO2)
(MPaG)TMO3)
(ºC)
S, FS, F
15, 20, 2520, 25, 32, 40
A351 Gr.CF8A351 Gr.CF8
2.12.1
220220
7601020
J3S-XJ5S-X
SS3V
SS3NFS3
JH3S-X
LEX3N-TZ
JH7RM-P
1) Connection: S = Screwed, W = Socket Weld, F = Flanged 2)
PMO: Maximum Operating Pressure (1 MPa = 10.197 kg/cm2) 3) TMO: Maximum Operating Temperature
Full product details (sizes, pressures, capacities and materials) are included in the individual specification data sheets (SDS). Some models are optional and may not be shown on the SDS, contact TLV for details.To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.CAUTION
≤ 1.4 MPaG
≤ 2.1 MPaG
≤ 4.6 MPaG
≤ 1.57 MPaG
≤ 2.1 MPaG
≤ 1.0 MPaG
≤ 2.5 MPaG
≤ 1.0 MPaG
≤ 0.6 MPaG
≤ 3.0 MPaG
≤ 2.0 MPaG
≤ 2.1 MPaG
PowerTrap
Pressure ReducingValves
Drain Traps Air Vents CycloneSeparators
Valves Check ValvesAutomatic Multi-Control Valves
PneumaticControl Valves
Free Float
3-Point Seal
Free Float*
3-Point Seal*
Cyclone Separator
Cyclone Separator* Cyclone Separator*
Save energy by recovering high-
temperature condensate with
PowerTrap mechanical pumps.
Rapid and automatic
air vents to discharge
air and non-hazardous
gases from fluid or steam systems.
Cyclone SeparatorRemove water from
air or steam using a
stainless steel cyclone separator
with 98% separation efficiency.
Manual, motorized and pneumatic
ball valves with tight sealing.
Spring-mounted disc provides a
tight seal with easy installation.
Y-strainers with simple design are
highly durable, and are easily
maintained.
Drain traps discharge
condensate from air
or gas systems while
maintaining an air-tight seal.
Coupled with a
specialized controller,
the MC-COS Series can accurately
control pressure and temperature.
A pilot-operated PRV with
built-in cyclone separator
and trap, or a direct acting PRV to supply
stable secondary pressure.
A filter filter with built-
in cyclone separator
to create high-quality dry steam and
extend filter life cycle.
Manage costs using an accurate
stainless steel flow meter.
Cyclone SeparatorControl valve, cyclone
separator and trap
supplies dry steam while
controlling secondary pressure.
SeparatorFilters
VortexFlowmeters
Other Stainless ProductsA wide range of high-quality valves, condensate recovery equipment, pressure reducing valves,
measurement instruments, etc. with a long product life are available in energy-saving stainless steel.
Size (mm)Inlet -- Outlet
MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, FS, FS, FS, FS, FS, F
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
1.41.051.051.4
1.051.05
200185185200185185
GP14GP10GP10LGT14GT10GT10L
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
FFFSF
20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 50
15, 20, 2515, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
0.31.62.11.60.9
220220220220100
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
F 15, 20, 25, 40, 50 A351 Gr.CF8 1.0 220CV-COS
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
F 15 -- 300 A351 Gr.CF3M 2.0 400EF73
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, F 15, 20, 25, 40, 50 A351 Gr.CF8 0.6 165SF1
Specifications vary depending on orifice type. Figures listed are for Metal/Rubber orifices.
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, FS, W, FFS, W, FS, W, FW, F
15, 20, 2515, 20, 25
40, 5015, 20, 2515, 20, 25, 4020, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
4.5/2.14.54.5
2.1/1.04.6/2.24.6/4.0
300/150300/150300/150220/150425/150425/150
Discharge Cap. (kg/h)
25013807200
385/130560/270
2000/1380
GAS1NGAS2NGAS3NSS1VGJAH5RGJAH7RG
* VS1A vents only initial air.
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, FS, W, FS
15, 20, 2515, 20, 25
10, 15
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
2.12.12.1
150150235
Medium
(Hot) Water(Hot) Water
Steam
VS1A*VS1CLA21
COS-3/COSR-3COS-16/COSR-16COS-21/COSR-21DR20ACOS-10/ACOSR-10
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
FF
20, 25, 40, 5015, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8
0.31.6
220220
MC-COS-3/MC-COSR-3MC-COS-16/MC-COSR-16
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
SFSFF
15, 20, 25, 32, 40, 5015, 20, 25, 32, 4025, 40, 50, 8050, 65, 80, 100
50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
CK3*CKF3*CK3MGCKF3MGCKF3RG* PMO and TMO differ depending on valve seat material.
Values listed are for Metal (M)/Rubber (R)/Fluorine Resin (T)
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
SFSFS, W, F
15, 20, 2515, 20, 25, 40, 50, 65, 80, 100
15, 20, 2515, 20, 25, 40, 50, 65, 80, 10015, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
1.61.61.01.02.5
220350100100300
DC3S
DC3A
DC7
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, FSSS, FS, FS, F
15, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 508, 10, 15, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 50
SCS13A351 Gr.CF8A351 Gr.CF8
SCS13SCS13SCS13
1.01.01.01.01.01.0
185185100185185185
BB1NBV1BV1LMB12PB10NPB11
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S 15, 20, 25, 32, 40, 50 A351 Gr.CF8 2.1 220Y3
*MC-COS only *COS/MCOS/ACOS only
* VS1A/VS1C only
Strainers
CV-COS
1) Connection: S = Screwed, W = Socket Weld, F = Flanged 2)
PMO: Maximum Operating Pressure (1 MPa = 10.197 kg/cm2) 3) TMO: Maximum Operating Temperature
Full product details (sizes, pressures, capacities and materials) are included in the individual specification data sheets (SDS). Some models are optional and may not be shown on the SDS, contact TLV for details.To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.CAUTION
≤ 1.4 MPaG
≤ 2.1 MPaG
≤ 4.6 MPaG
≤ 1.57 MPaG
≤ 2.1 MPaG
≤ 1.0 MPaG
≤ 2.5 MPaG
≤ 1.0 MPaG
≤ 0.6 MPaG
≤ 3.0 MPaG
≤ 2.0 MPaG
≤ 2.1 MPaG
PowerTrap
Pressure ReducingValves
Drain Traps Air Vents CycloneSeparators
Valves Check ValvesAutomatic Multi-Control Valves
PneumaticControl Valves
Free Float
3-Point Seal
Free Float*
3-Point Seal*
Cyclone Separator
Cyclone Separator* Cyclone Separator*
Save energy by recovering high-
temperature condensate with
PowerTrap mechanical pumps.
Rapid and automatic
air vents to discharge
air and non-hazardous
gases from fluid or steam systems.
Cyclone SeparatorRemove water from
air or steam using a
stainless steel cyclone separator
with 98% separation efficiency.
Manual, motorized and pneumatic
ball valves with tight sealing.
Spring-mounted disc provides a
tight seal with easy installation.
Y-strainers with simple design are
highly durable, and are easily
maintained.
Drain traps discharge
condensate from air
or gas systems while
maintaining an air-tight seal.
Coupled with a
specialized controller,
the MC-COS Series can accurately
control pressure and temperature.
A pilot-operated PRV with
built-in cyclone separator
and trap, or a direct acting PRV to supply
stable secondary pressure.
A filter filter with built-
in cyclone separator
to create high-quality dry steam and
extend filter life cycle.
Manage costs using an accurate
stainless steel flow meter.
Cyclone SeparatorControl valve, cyclone
separator and trap
supplies dry steam while
controlling secondary pressure.
SeparatorFilters
VortexFlowmeters
Other Stainless ProductsA wide range of high-quality valves, condensate recovery equipment, pressure reducing valves,
measurement instruments, etc. with a long product life are available in energy-saving stainless steel.
Size (mm)Inlet -- Outlet
MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, FS, FS, FS, FS, FS, F
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
1.41.051.051.4
1.051.05
200185185200185185
GP14GP10GP10LGT14GT10GT10L
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
FFFSF
20, 25, 40, 5015, 20, 25, 40, 5015, 20, 25, 40, 50
15, 20, 2515, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
0.31.62.11.60.9
220220220220100
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
F 15, 20, 25, 40, 50 A351 Gr.CF8 1.0 220CV-COS
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
F 15 -- 300 A351 Gr.CF3M 2.0 400EF73
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, F 15, 20, 25, 40, 50 A351 Gr.CF8 0.6 165SF1
Specifications vary depending on orifice type. Figures listed are for Metal/Rubber orifices.
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, FS, W, FFS, W, FS, W, FW, F
15, 20, 2515, 20, 25
40, 5015, 20, 2515, 20, 25, 4020, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
4.5/2.14.54.5
2.1/1.04.6/2.24.6/4.0
300/150300/150300/150220/150425/150425/150
Discharge Cap. (kg/h)
25013807200
385/130560/270
2000/1380
GAS1NGAS2NGAS3NSS1VGJAH5RGJAH7RG
* VS1A vents only initial air.
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, W, FS, W, FS
15, 20, 2515, 20, 25
10, 15
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
2.12.12.1
150150235
Medium
(Hot) Water(Hot) Water
Steam
VS1A*VS1CLA21
COS-3/COSR-3COS-16/COSR-16COS-21/COSR-21DR20ACOS-10/ACOSR-10
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
FF
20, 25, 40, 5015, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8
0.31.6
220220
MC-COS-3/MC-COSR-3MC-COS-16/MC-COSR-16
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
SFSFF
15, 20, 25, 32, 40, 5015, 20, 25, 32, 4025, 40, 50, 8050, 65, 80, 100
50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
CK3*CKF3*CK3MGCKF3MGCKF3RG* PMO and TMO differ depending on valve seat material.
Values listed are for Metal (M)/Rubber (R)/Fluorine Resin (T)
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
SFSFS, W, F
15, 20, 2515, 20, 25, 40, 50, 65, 80, 100
15, 20, 2515, 20, 25, 40, 50, 65, 80, 10015, 20, 25, 40, 50
A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8A351 Gr.CF8
1.61.61.01.02.5
220350100100300
DC3S
DC3A
DC7
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S, FSSS, FS, FS, F
15, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 508, 10, 15, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 5015, 20, 25, 32, 40, 50
SCS13A351 Gr.CF8A351 Gr.CF8
SCS13SCS13SCS13
1.01.01.01.01.01.0
185185100185185185
BB1NBV1BV1LMB12PB10NPB11
Size (mm) MaterialModel Conn.1)
PMO2)
(MPaG)TMO3)
(ºC)
S 15, 20, 25, 32, 40, 50 A351 Gr.CF8 2.1 220Y3
*MC-COS only *COS/MCOS/ACOS only
* VS1A/VS1C only
Strainers
CV-COS
Internet World Wide Web URL http://www.tlv.com Pamphlet M8012 Rev.4/2008Specifications subject to change without notice.
881 Nagasuna, Noguchi, Kakogawa, Hyogo 675-8511, JAPANPhone: 079-427-1818Fax: 079-425-1167 E-mail: [email protected]
Manufacturer
Kakogawa, Japanis approved by LRQA Ltd. to ISO 9001/14001
ISO 9001/ ISO 14001
(M)