STAINLESS STEEL PRODUCT DATA SHEETSTAINLESS STEEL PRODUCT DATA SHEET Stainless-Steel Roll Jacketing...

1
Thermal Insulation Products - Jacketing & Cladding Sealumet (Australia) Pty Limited Mailing Address : PO Box 2218, Warwick, Perth, WA, 6024 Warehouse : Unit 2, 6 Langar Way, Landsdale, Perth, WA - 6065 Telephone : +618 6201 6153, Fax : +618 9303 4560 E-mail: [email protected] Website: www.sealumet.com DISCLAIMER These data sheets are based on specifications, data and test results at time of publication. No guarantee as to completeness, accuracy or results is either expressed or implied. The suitability for an intended use is the responsibility of the user. As choice of material, method of application and site conditions are beyond our control we accept no liability for direct or consequential damages. Any material proved to be defective within the published shelf life* will be replaced. *From date of supply. STAINLESS STEEL PRODUCT DATA SHEET Stainless-Steel Roll Jacketing is manufactured from AISI-304, AISI-304L, AISI-316 AND AISI-316L prime grade Austenitic stainless steel with regular 2B finish for flatness and reduced glare. The yield strength is 30,000/45,000 PSI, the tensile 75,000/100,000 PSI. For easy field fabrication, Stainless Steel Jacketing is supplied in the annealed or soft condition. AISI- 304 AND AISI-304L is normally used except in the most corrosive areas where AISI-316 AND AISI-316L is justified. All AISI-304, AISI-304L, AISI-316 AND AISI-316L Stainless steel are described in ASTM A-240. Stainless Steel Jacketing has a melting point of approximately 2500°F Stainless Steel offers the best fire protection of all metals used for metal jacketing. THICKNESS 010”, 016”, 020”, 024”, 032”, 040”, 050” WIDTH AND DESCRIPTION Rolls and flat sheets 24” through 48”, 1/4 and 3/4” deep Corrugated sheets – 33”, 4” x 1” Box Rib – 28”, 38-1/2" FINISH Stainless Steel jacketing is available in several finishes, which include smooth, stucco embossed, and in the lighter gauges, 3/16” corrugated. The stucco embossed finish on Stainless Steel Jacketing reduces glare from sunlight, adds strength and has more potential for masking application fingerprints, scratches, dents and other minor surface blemishes. Stainless Steel jacketing is also available in smooth, light grey Fluoride coating (PVF/PVDF), and in the lighter gauges, 3/16” corrugated. Fluoride coating process details are available on request. MOISTURE BARRIER For increased galvanic and corrosion protection, Stainless Steel jacketing can be supplied with a moisture barrier, with an integral, continuously heat sealed Polysurlyn moisture barrier heat and pressure bonded to the interior surface. Polysurlyn shall be a 3.0 mil (76.2 μm) coextrusion of Dupont's Surlyn and polyethylene. This moisture barrier prevents galvanic corrosion caused by contact of dissimilar metals in the presence of moisture, and also chemical corrosion caused by contact of dissimilar metals in the presence of moisture, and also chemical corrosion caused by certain insulation materials when the sheets are installed over damp insulation materials. Polykraft is also available as a moisture barrier if specified in place of Polysurlyn. SL0036 APPLICATIONS The primary use of Stainless Steel sheet and jacketing is for hostile environments such as the pulp, paper, textile, refinery and Petro-Chemical applications. STAINLESS STEEL CHARACTERISTICS AISI-304: Most widely used steel type. 304 is known for good corrosion resistance, thermal resistance, low-temperature strength and mechanical properties. 304 have good draw ability such as deep drawing and bending. 304 is not hardened by heat treatment. (non-magnetic, usable temperature: - 196~800°C) AISI-316: Excellent corrosion resistance, pitting corrosion resistance and high temperature strength by adding Mo. Useful in severe/harsh conditions. Excellent work hardening (non- magnetic). AISI-316L: Low carbon steel type. Has the normal properties of 316 plus excellent inter-granular corrosion resistance.

Transcript of STAINLESS STEEL PRODUCT DATA SHEETSTAINLESS STEEL PRODUCT DATA SHEET Stainless-Steel Roll Jacketing...

Page 1: STAINLESS STEEL PRODUCT DATA SHEETSTAINLESS STEEL PRODUCT DATA SHEET Stainless-Steel Roll Jacketing is manufactured from AISI-304, AISI-304L, AISI-316 AND AISI-316L prime grade Austenitic

Thermal Insulation Products - Jacketing & Cladding

Sealumet (Australia) Pty LimitedMailing Address : PO Box 2218, Warwick, Perth, WA, 6024Warehouse : Unit 2, 6 Langar Way, Landsdale, Perth, WA - 6065Telephone : +618 6201 6153, Fax : +618 9303 4560E-mail: [email protected] Website: www.sealumet.comDISCLAIMERThese data sheets are based on specifications, data and test results at time of publication. No guarantee as to completeness, accuracy or results is either expressed or implied. The suitability foran intended use is the responsibility of the user. As choice of material, method of application and site conditions are beyond our control we accept no liability for direct or consequential damages.Any material proved to be defective within the published shelf life* will be replaced. *From date of supply.

STAINLESS STEEL PRODUCT DATA SHEET

Stainless-Steel Roll Jacketing is manufactured from AISI-304,AISI-304L, AISI-316 AND AISI-316L prime grade Austeniticstainless steel with regular 2B finish for flatness and reducedglare. The yield strength is 30,000/45,000 PSI, the tensile75,000/100,000 PSI. For easy field fabrication, Stainless SteelJacketing is supplied in the annealed or soft condition. AISI-304 AND AISI-304L is normally used except in the mostcorrosive areas where AISI-316 AND AISI-316L is justified. AllAISI-304, AISI-304L, AISI-316 AND AISI-316L Stainless steelare described in ASTM A-240.

Stainless Steel Jacketing has a melting point of approximately2500°F Stainless Steel offers the best fire protection of allmetals used for metal jacketing.

THICKNESS010”, 016”, 020”, 024”, 032”, 040”, 050”

WIDTH AND DESCRIPTIONRolls and flat sheets 24” through 48”, 1/4 and 3/4” deep Corrugated sheets – 33”, 4” x 1” Box Rib – 28”, 38-1/2"

FINISH Stainless Steel jacketing is available in several finishes, whichinclude smooth, stucco embossed, and in the lighter gauges,3/16” corrugated. The stucco embossed finish on StainlessSteel Jacketing reduces glare from sunlight, adds strength andhas more potential for masking application fingerprints,scratches, dents and other minor surface blemishes.

Stainless Steel jacketing is also available in smooth, light greyFluoride coating (PVF/PVDF), and in the lighter gauges, 3/16”corrugated. Fluoride coating process details are available onrequest.

MOISTURE BARRIERFor increased galvanic and corrosion protection, StainlessSteel jacketing can be supplied with a moisture barrier, with anintegral, continuously heat sealed Polysurlyn moisture barrierheat and pressure bonded to the interior surface. Polysurlynshall be a 3.0 mil (76.2 μm) coextrusion of Dupont's Surlyn andpolyethylene. This moisture barrier prevents galvanic corrosioncaused by contact of dissimilar metals in the presence ofmoisture, and also chemical corrosion caused by contact ofdissimilar metals in the presence of moisture, and alsochemical corrosion caused by certain insulation materialswhen the sheets are installed over damp insulation materials.

Polykraft is also available as a moisture barrier if specified inplace of Polysurlyn.

SL0036

APPLICATIONSThe primary use of Stainless Steel sheet and jacketing is forhostile environments such as the pulp, paper, textile, refineryand Petro-Chemical applications.

STAINLESS STEEL CHARACTERISTICS

AISI-304: Most widely used steel type. 304 is known for goodcorrosion resistance, thermal resistance, low-temperaturestrength and mechanical properties. 304 have good drawability such as deep drawing and bending. 304 is not hardenedby heat treatment. (non-magnetic, usable temperature: -196~800°C)

AISI-316: Excellent corrosion resistance, pitting corrosionresistance and high temperature strength by adding Mo. Usefulin severe/harsh conditions. Excellent work hardening (non-magnetic).

AISI-316L: Low carbon steel type. Has the normal propertiesof 316 plus excellent inter-granular corrosion resistance.