Stainless Steel Floor Pedestal - Amico
3
Floor Pedestal C US LISTED The Floor Pedestal shall be an Amico Alert-1 series. The floor pedestal shall be made of stainless steel with a #4 satin finish. It shall be capable of holding medical gas outlets and electrical devices within the structure of the unit. The electrical devices are provided with electrical boxes and 18" flex conduit and wire. Provided wire is #12, stranded copper THHN, 600 volt insulation (or RW90 XLPE, 600 volt insulation in Canada) for hot and neutral (black and white respectively). Grounds shall be #10, THHN (or Type R, RW90 XLPE in Canada) stranded copper wire (green). All ground conductors are installed in conduit. Receptacles will be installed with ground pin up. There are (2) standard sizes to choose from: Small Shell - 12" x 10" x 20" (305 mm x 254 mm x 508 mm) Large Shell - 18" x 10" x 20" (457 mm x 254 mm x 508 mm) The Floor Pedestal is rated for 120 to 240 V max, 50-60 Hz. The Floor Pedestal is UL Listed to U.S. and Canadian safety standards. Stainless steel shell for aesthetic appearance. All devices and gas outlets are accessible through the access panel on the back of the pedestal or the removable top. Custom sizes are available upon request. General Specifications: Features: Stainless Steel 1 inch [mm] Project Name: Distributed By:
Transcript of Stainless Steel Floor Pedestal - Amico
Floor Pedestal
C US LISTED
The Floor Pedestal shall be an Amico Alert-1 series.
The floor pedestal shall be made of stainless steel with a #4 satin finish.
It shall be capable of holding medical gas outlets and electrical devices within the structure of the unit.
The electrical devices are provided with electrical boxes and 18" flex conduit and wire. Provided wire is #12, stranded copper THHN, 600 volt insulation (or RW90 XLPE, 600 volt insulation in Canada) for hot and neutral (black and white respectively). Grounds shall be #10, THHN (or Type R, RW90 XLPE in Canada) stranded copper wire (green). All ground conductors are installed in conduit. Receptacles will be installed with ground pin up.
There are (2) standard sizes to choose from:
Small Shell - 12" x 10" x 20" (305 mm x 254 mm x 508 mm)
Large Shell - 18" x 10" x 20" (457 mm x 254 mm x 508 mm)
The Floor Pedestal is rated for 120 to 240 V max, 50-60 Hz.
The Floor Pedestal is UL Listed to U.S. and Canadian safety standards.
Stainless steel shell for aesthetic appearance.
All devices and gas outlets are accessible through the access panel on the back of the pedestal or the removable top.
Custom sizes are available upon request.
General Specifications:
Features:
Stainless Steel
1
inch[mm]
Project Name:
Distributed By:
Device & Accessory Chart
2
Please indicate the devices and/or accessories that will be installed on the floor pedestal, by selecting the check box in the chart below.
ALL ELECTRICAL DEVICES ARE HOSPITAL GRADE.
NOTE: CARBON DIOXIDE OUTLETS ARE NOT AVAILABLE IN PURITAIN-BENNETT. NITROGEN OUTLETS ARE ONLY AVAILABLE IN DISS.
All electrical devices are HUBBELL brand
*NOTE: Carbon Dioxide outlets are not available in Puritan-Bennett. Nitrogen outlets are only available in DISS.
*NOTE: Passive Evacuation for retractable will provide 20 ft length of 3/4" PVC hose for connection in ceiling. 3/4" Type L copper pipe will be provided for stationary columns extending 8" above ceiling plate.
*QDXXX
CHXXX
E5-REDE6-IVORY
E7-REDE8-IVORY
E9-REDE10-IVORY
E11-REDE12-IVORY
TL
E13-RED
E14-IVORY
E13C-RED
E14C-IVORY
MJ
GJ
Ohmeda/MedaesCompatible
ChemetronCompatible
Puritan-BennettCompatible
OxequipCompatible
Ground JackReceptacle
Single Bender (SLR-3)GREEN
Ground Fault CircuitInterrupter
(C = Canadian)
Twist-LockReceptacle
Hubble 23000-HG125V/20a
Single Receptacle125V/15a
(CAN/International)
Single Receptacle125V/20a
(US/International)
Duplex Receptacle125V/15a
(CAN/International)
Duplex Receptacle125V/20a
(US/International)
Data - TelephoneCommunication Jack or
Duplex Receptacle(Provision Only)
DP - Duplex Receptacle Provision
Stainless SteelIV Hook
(Duplex only)
DISS
PBXXX
*DIXXX
IMP
DPIV
Passive Evacuation (19 mm/33 mm)
Ceiling Column
Ground JackReceptacle
Dual Bender(SLR-3)GREEN
GJ2
PE
Passive Evacuationwith Impedance
Valve (19mm/22mm)(Side Mount Only)
Monitor JackDuplex
(5-pin shown)Amphenol Model10-825806-05S
97-14S-5S
OXXXX
VacuumBottle Slide
SL DJ
Approval Signature Date Phone Number
3
Technical SpecificationsOutlet StylesDISS
Puritan-Bennett
Chemetron
Ohmeda
Oxequip
Gas LegendOxygen = OMedical Air = AVacuum = VNitrous Oxide = 2Nitrogen = NCarbon Dioxide = CWAGD (US) = WAGSS (Canada) = E
InstallationUse four 3/8"-1/2" (9.53 cm -12.7 cm) diameter mounting bolts (provided by contractor) to mount the pedestal securely on the finished floor. Remove the top cover and access panel for piping and wiring.
Please indicate which size pedestal will be used, by using the check box provided below.
Please use the Gas Legend below to populate the Equipment Layout grid above.
Left View
Right View
Front View
Back View
X1 X2 X3 X4 X5 X6
X7 X8Access Panel
Large Pedestal
X1 X2 X3 X4 X5 X6
X7 X8 X10 X11 X12X9
Left View
Right View
Front View
Back View
Access Panel
Small Pedestal
Inch[mm]
8[203]
4[102]
6[152]
12[305]
1.5[38]
4 TYP
4 HOLES0.563[14]
BOTTOM OPENING
Equipment LayoutX1X2X3X4X5X6X7X8X9
X10X11X12
Model NumbersSmall Pedestal: W-PEDESTAL-12
Large Pedestal: W-PEDESTAL-18
Amico Corporation 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada | 600 Prime Place, Hauppauge, NY 11788, USAToll Free Tel: 1.877.462.6426 | Toll Free Fax: 1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862
www.amico.com ACA-SP-FLOOR-PEDESTAL 12.19.2019
