STAINLESS STEEL EXPANSION JOINT · PDF fileejma 9 iso 15348 asme b36.10/b36.19 en 1092-1...
Transcript of STAINLESS STEEL EXPANSION JOINT · PDF fileejma 9 iso 15348 asme b36.10/b36.19 en 1092-1...
www.bmeurope.be
BELLOWS & METALLIC HOSES76
wwwwww..bbmmeeuurrooppee..bbee
BALANCED LATERAL EXPANSION JOINT
STAINLESS STEEL EXPANSION JOINT
GENERAL PRODUCT SHEET
A balanced lateral expansion joint is a double lateral
expansion joint which is equipped with tie-bars.
These are threaded rods with conical washers at the
welding lugs. Two or more tie-bars are mounted,
equally distributed around the circumference of the
flanges or welding ends. The construction method
with two tie-bars allows lateral movements in all di-
rections as well as angular movement in one plane.
Constructions with more tie-bars only allow lateral mo-
vement.
When no axial movement is allowed the pressure for-
ce in the expansion joint is absorbed by the balancer.
This reduces the forces on the piping system.
> DESCRIPTION
> KEY FEATURES
Absorption of large lateral deflections
Balanced: no other movements possible
Pressure thrust restrained
Standard grade of bellow is AISI 316. Flanges
are made out of standard carbon steel with
corrosion protection for fixed flanges. On re-
quest stainless steel flanges are also available.
Pipe-ends and bund rings are manufactured
in AISI 316 grade. The additional construction
of the threaded rods is possible in paint coa-
ted steel and stainless steel.
> MATERIAL PROPERTIES
The bellow is designed according to the most
recent EJMA standards. Assembly is done ac-
cording to EN 14917 / ISO 15348. Assemblies
are possible with welding ends (ASME B36.10),
flanges according to European standard (EN
1092-1) or ANSI standard (ASME B16.5). Flan-
ges according to JIS standard (JIS B2220) are
also possible on request. Conical washers accor-
ding DIN6319C/D.
> STANDARD
> MOVEMENT TABLE
Axial LateralSingle plane
Multi-planeO X
X
AngularSingle plane
Multi-planeOO
This type of expansion joint is equipped
with fixed flanges. Pipe-end configurations
are also possible.
This table will indicate the possible movements for each type of expansion joint
X= suitable for movement O= not suitable for movements
BELLOWS & METALLIC HOSES77
BALANCED LATERAL EXPANSION JOINT
STAINLESS STEEL EXPANSION JOINT
> TYPICAL APPLICATIONS
> POSSIBLE ACCESSORIES
Liner
Heat protection sleeve
All options are explained in detail on page 125-128
The extension or contraction in the paral-
lel pipes with anchors (IA) causes a lateral
movement in the transversal pipe. The ba-
lancers will not allow elongation of the ex-
pansion joint, therefore the pipes will have
to be flexible enough to withstand some
bending. This has the advantage that it is
a very stable configuration as the pressure
thrust is restrained by the balances.
13
C O M P E N S A T O R E N
B a s i s b e g r i p p e n c o m p e n s a t o r e n - t o e p a s s i n g s v o o r b e e l d e n
Toepassing van laterale compensatoren
De compensator bestaat uit tweeenkelvoudige compensatoren, onder-ling verbonden met een pijpstuk.
Fig. 9Een gebruikelijke toepassing van delaterale compensator is de inbouw ineen 90° bochtopstelling. De trekstan-gen dienen om de reactiekracht ten-gevolge van de procesdruk op te van-gen. Nog beter is de opstelling als infig. 14 met scharniercompensatorenom ook de buigbeweging in de leidingop te vangen.
Fig. 10In gevallen waar een laterale compen-sator een axiale beweging, anders danzijn eigen thermische uitzetting, moetcompenseren kan deze functionerenals een axiaal begrensde compensa-tor, mits gebruikt in combinatie met 2hoofdverankeringen om reactiekrach-ten op te vangen.
Fig. 11In gevallen waarbij de compensatorerg lang is ten opzichte van zijn diame-ter of waar een groot aantal golven aanelk einde van de compenstor wordtgebruikt of waar de compensator isblootgesteld aan uitwendige belastingzoals windkracht, trillingen enz., kanhet een vereiste zijn dat een begren-zing in de compensator wordt inge-bouwd. Dit dient om overmatige ver-plaatsing van de balgen en het betrek-kelijk vrij opgehangen pijpstuk er tus-sen te beperken. Fig. 11 A en B geventwee voorbeelden van bewegingsbe-grenzing van trekstangen.
IA
IA
PG
PG Fig. 9
Fig. 10
Fig. 11
www.bmeurope.be
www.bmeurope.be
BELLOWS & METALLIC HOSES78
CODE DN Lmm
ODmm
Økmm
Movements Spring rates Eff.A
± axmm
± lat.mm
± ang°
± axN/mm
± lat.N/mm
± angNm/°
(cm2)
KR8L040EVEV-K1-BL 40
1.1/2”
300150 110 0
500
- 2,4 - 19
KR8L040EVEV-M1-BL 440 65 - 0,48 - 19
KR8L050EVEV-K1-BL 50
2”
305165 125 0
500
- 4,39 - 26
KR8L050EVEV-M1-BL 475 65 - 0,78 - 26
KR8L065EVEV-K1-BL 65
2.1/2”
310185 145 0
600
- 5,22 - 45
KR8L065EVEV-M1-BL 480 73 - 1,26 - 45
KR8L080EVEV-K1-BL 80
3”
370200 160 0
600
- 4,96 - 65
KR8L080EVEV-M1-BL 530 73 - 2,08 - 65
KR8L100EVEV-K1-BL 100
4”
400220 180 0
600
- 10,85 - 110
KR8L100EVEV-M1-BL 555 73 - 3,21 - 110
KR8L125EVEV-K1-BL 125
5”
440250 210 0
600
- 14,62 - 168
KR8L125EVEV-M1-BL 620 73 - 5,65 - 168
TYPE KR8LEVEV-BL
Double bellowed, lateral expansion joint with fixed EN flanges.
STANDARDEJMA 9
ISO 15348
ASME B36.10/B36.19
EN 1092-1
MATERIALBellow / Mid pipe: SS AISI 316
Flanges: carbon steel, protected with anti-corrosion paint
Balancer parts: Galvanized steel or SS A2
OTHER SPECIFICATIONSPressure class bellow: 16 bar
Flange pattern: DN40-150: PN16
DN200-500: PN10
Min. 1000 life cycles
ALSO AVAILABLEStainless steel flanges
Custom flange design
POSSIBLE ACCESSORIES Braid
Protection sleeve
Pyro jacket
TECHNICAL DATA
STAINLESS STEEL EXPANSION JOINTK
R8
LE
VE
V-B
L
E
XPA
NS
ION
JO
INT
BELLOWS & METALLIC HOSES79
CODE DN Lmm
ODmm
Økmm
Movements Spring rates Eff.A
± axmm
± lat.mm
± ang°
± axN/mm
± lat.N/mm
± angNm/°
(cm2)
KR8L150EVEV-K1-BL 150
6”
460285 240 0
950
- 20,56 - 239
KR8L150EVEV-M1-BL 650 114 - 5,49 - 239
KR8L200EVEV-K1-BL 200
8”
550340 295 0
950
- 32,66 - 400
KR8L200EVEV-M1-BL 730 114 - 11,05 - 400
KR8L250EVEV-K1-BL 250
10”
600395 350 0
950
- 41,14 - 632
KR8L250EVEV-M1-BL 885 114 - 15,58 - 632
KR8L300EVEV-K1-BL 300
12”
660445 405 0
950
- 86,1 - 877
KR8L300EVEV-M1-BL 940 114 - 22,76 - 877
KR8L350EVEV-K1-BL 350
14”
720505 460 0
950
- 185,76 - 1041
KR8L350EVEV-M1-BL 1220 114 - 28,74 - 1041
KR8L400EVEV-K1-BL 400
16”
900565 515 0
1200
- 109,63 - 1349
KR8L400EVEV-M1-BL 1350 157 - 43,07 - 1349
KR8L450EVEV-K1-BL 450
18”
950615 565 0
1200
- 278,52 - 1706
KR8L450EVEV-M1-BL 1400 157 - 74,8 - 1706
KR8L500EVEV-K1-BL 500
20”
1040670 620 0
1200
- 272,55 - 2087
KR8L500EVEV-M1-BL 1520 157 - 70,64 - 2087
KR
8LE
VE
V-B
L
E
XPA
NS
ION
JO
INT
www.bmeurope.be
* THE DIMENSIONS ARE INDICATIVE AND MAY BE CHANGED TO THE DISCRETION OF BME, BEARING THE SAME TECHNICAL PROPERTIES
www.bmeurope.be
BELLOWS & METALLIC HOSES80
CODE DN Lmm
ODmm
Økmm
Movements Spring rates Eff.A
± axmm
± lat.mm
± ang°
± axN/mm
± lat.N/mm
± angNm/°
(cm2)
KR8L040AVAV-K1-BL 40
1.1/2”
300125 98,4 0
500
- 2,4 - 19
KR8L040AVAV-M1-BL 440 65 - 0,48 - 19
KR8L050AVAV-K1-BL 50
2”
305150 120,7 0
500
- 4,39 - 26
KR8L050AVAV-M1-BL 475 65 - 0,78 - 26
KR8L065AVAV-K1-BL 65
2.1/2”
310180 139,7 0
600
- 5,22 - 45
KR8L065AVAV-M1-BL 480 73 - 1,26 - 45
KR8L080AVAV-K1-BL 80
3”
370190 152,4 0
600
- 4,96 - 65
KR8L080AVAV-M1-BL 530 73 - 2,08 - 65
KR8L100AVAV-K1-BL 100
4”
400230 190,5 0
600
- 10,85 - 110
KR8L100AVAV-M1-BL 555 73 - 3,21 - 110
KR8L125AVAV-K1-BL 125
5”
440255 215,9 0
600
- 14,62 - 168
KR8L125AVAV-M1-BL 620 73 - 5,65 - 168
TYPE KR8LAVAV-BL
Double bellowed, lateral expansion joint with fixed ASME flanges.
STANDARDEJMA 9
ISO 15348
ASME B36.10/B36.19
ASME B16.5
MATERIALBellow / Mid pipe: SS AISI 316
Flanges: carbon steel, protected with anti-corrosion paint
Balancer parts: Galvanized steel or SS A2
OTHER SPECIFICATIONSPressure class bellow: 16 bar
Flange pattern: 150 LBS
Min. 1000 life cycles
ALSO AVAILABLEStainless steel flanges
Custom flange design
POSSIBLE ACCESSORIES Braid
Protection sleeve
Pyro jacket
TECHNICAL DATA
STAINLESS STEEL EXPANSION JOINTK
R8
LAVAV-B
L
E
XPA
NS
ION
JO
INT
BELLOWS & METALLIC HOSES81
CODE DN Lmm
ODmm
Økmm
Movements Spring rates Eff.A
± axmm
± lat.mm
± ang°
± axN/mm
± lat.N/mm
± angNm/°
(cm2)
KR8L150AVAV-K1-BL 150
6”
460280 241,3 0
950
- 20,56 - 239
KR8L150AVAV-M1-BL 650 114 - 5,49 - 239
KR8L200AVAV-K1-BL 200
8”
550345 298,5 0
950
- 32,66 - 400
KR8L200AVAV-M1-BL 730 114 - 11,05 - 400
KR8L250AVAV-K1-BL 250
10”
600405 362 0
950
- 41,14 - 632
KR8L250AVAV-M1-BL 885 114 - 15,58 - 632
KR8L300AVAV-K1-BL 300
12”
660485 431,8 0
950
- 86,1 - 877
KR8L300AVAV-M1-BL 940 114 - 22,76 - 877
KR8L350AVAV-K1-BL 350
14”
720535 476,3 0
950
- 185,76 - 1041
KR8L350AVAV-M1-BL 1220 114 - 28,74 - 1041
KR8L400AVAV-K1-BL 400
16”
900595 539,7 0
1200
- 109,63 - 1349
KR8L400AVAV-M1-BL 1350 157 - 43,07 - 1349
KR8L450AVAV-K1-BL 450
18”
950635 577,9 0
1200
- 278,52 - 1706
KR8L450AVAV-M1-BL 1400 157 - 74,8 - 1706
KR8L500AVAV-K1-BL 500
20”
1040700 635 0
1200
- 272,55 - 2087
KR8L500AVAV-M1-BL 1520 157 - 70,64 - 2087
www.bmeurope.be
KR
8LAVAV-B
L
E
XPA
NS
ION
JO
INT
* THE DIMENSIONS ARE INDICATIVE AND MAY BE CHANGED TO THE DISCRETION OF BME, BEARING THE SAME TECHNICAL PROPERTIES