Stainless Steel ANSI Pipe · Stainless Steel Pipe dimensions determined by ASME B36.19 covering the...
10
What is a Pipe? The term pipe covers a specific range of sizes laid down by ANSI specifications. Any sizes not covered by these specifications are tube. Stainless Steel Pipe dimensions determined by ASME B36.19 covering the outside diameter and the Schedule wall thickness. Note that stainless wall thicknesses to ANSI B36.19 all have an ‘S’ suffix. Sizes without an ‘S’ suffix are to ANSI B36.10 which is intended for carbon steel pipes. CONTACT Address: RB Centre Building 38 Second Avenue The Pensnett Estate Kingswinford West Midlands DY6 7UE Tel: 01384 276 400 Email: [email protected] Web: http://www.rightonblackburns.co.uk/ REVISION HISTORY Datasheet Updated 18 July 2019 DISCLAIMER This Data is indicative only and must not be seen as a substitute for the full specification from which it is drawn. In particular, the mechanical property requirements vary widely with temper, product and product dimensions. The information is based on our present knowledge and is given in good faith. However, no liability will be accepted by the Company is respect of any action taken by any third party in reliance thereon. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose. Any advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. Any contract between the Company and a customer will be subject to the Company’s Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request Stainless Steel ANSI Pipe © Copyright: Righton & Blackburns Limited [1 OF 10] CONTINUED
Transcript of Stainless Steel ANSI Pipe · Stainless Steel Pipe dimensions determined by ASME B36.19 covering the...
What is a Pipe?
The term pipe covers a specific range of sizes laiddown by ANSI specifications. Any sizes not covered bythese specifications are tube.
Stainless Steel Pipe dimensions determined by ASMEB36.19 covering the outside diameter and theSchedule wall thickness.
Note that stainless wall thicknesses to ANSI B36.19 allhave an ‘S’ suffix. Sizes without an ‘S’ suffix are toANSI B36.10 which is intended for carbon steel pipes.
CONTACT
Address: RB CentreBuilding 38Second AvenueThe Pensnett EstateKingswinfordWest MidlandsDY6 7UE
Tel: 01384 276 400Email: [email protected]: http://www.rightonblackburns.co.uk/
REVISION HISTORY
Datasheet Updated 18 July 2019
DISCLAIMERThis Data is indicative only and must not be seen as a substitute for the fullspecification from which it is drawn. In particular, the mechanical propertyrequirements vary widely with temper, product and product dimensions. Theinformation is based on our present knowledge and is given in good faith.However, no liability will be accepted by the Company is respect of anyaction taken by any third party in reliance thereon.
As the products detailed may be used for a wide variety of purposes and asthe Company has no control over their use; the Company specificallyexcludes all conditions or warranties expressed or implied by statute orotherwise as to dimensions, properties and/or fitness for any particularpurpose.
Any advice given by the Company to any third party is given for that party’sassistance only and without liability on the part of the Company. Anycontract between the Company and a customer will be subject to theCompany’s Conditions of Sale. The extent of the Company’s liabilities to anycustomer is clearly set out in those Conditions; a copy of which is availableon request
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[1 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[2 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[3 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[4 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[5 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[6 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[7 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[8 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[9 OF 10] CONTINUED
Stainless SteelANSI Pipe
© Copyright: Righton & Blackburns Limited
[10 OF 10]
