3M Touch Systems © 3M 2008. All Rights Reserved. 3M CONFIDENTIAL Company Overview Date.
Stainless Model 3M & 3M4 Steel Pumps - Ebara · 304 S/S Centrifugal Pumps (2 pole & 4 pole)...
4
304 S/S Centrifugal Pumps (2 pole & 4 pole) Model 3M & 3M4 Stainless Steel Pumps Page 1/4 Specifications Materials Motor Data Options ˜ End suction centrifugal pump with closed impeller ˜ Maximum working pressure: 10 bar ˜ Liquid temperature: -10 °C to +90 °C (standard construction) ˜ Pump casing: 304 Stainless Steel ˜ Impeller: 304 Stainless Steel ˜ Casing cover: 304 Stainless Steel ˜ Shaft: 304 Stainless Steel (wetted part) ˜ Motor bracket: Cast Iron ˜ Mechanical seal: Carbon/Ceramic/NBR ˜ Extended shaft motors, aluminium frame ˜ TEFC, 2 or 4 pole, 50 Hz ˜ Insulation class F ˜ IP55 Protection ˜ 3 Phase (dual voltage motors) ˜ 400/690 V (5.5 kW & above) 230/400 V (up to 4.0 kW) Range ˜ ˜ 1.1 to 15 kW - 3 Phase (2 pole models) ˜ 0.37 to 2.2 kW - 3 Phase (4 pole models) 32 to 50 mm Ø discharge ˜ ˜ High temperature seal (110 °C) (Carbon/Ceramic/Viton seal, Viton O’ Rings) Hard faced seal (110 °C) (SiC/SiC/Viton seal, Viton O’ Rings) — Over 30 models — 32 mm to 50 mm discharge size — 0.37 to 15 kW motor power — Flows to 1200 lpm — Heads to 70 m — 2 Pole & 4 pole versions All the hydraulic and wetted components are manufactured in 304 Stainless Steel To DIN 24255 Th stainless steel pumps feature a piece volute casing that is produced using an advanced computer controlled Plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency. The back pull-out construction permits the disassembly and overhaul of the impeller, mechanical seal and motor without removal of the suction or discharge piping, or pump casing. The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads. ese unique one 30 20 15 10 8 6 4 3 40 50 60 80 100 Total Head - m 100 200 300 500 1000 700 2000 Capacity - lpm 50 32 mm 32 mm 40 mm 40 mm 50 mm 50 mm 3M4 (4 pole) 3M (2 pole) Economical extended motor shaft design. Model Code 3M 40 - 200 / 7.5 Motor Size kW Nominal Impeller Diameter mm Discharge Size Ø mm 3M = 2 pole model, 3M4 = 4 pole model Accessories ˜ kits available Carbon steel or 304 stainless steel companion flange
Transcript of Stainless Model 3M & 3M4 Steel Pumps - Ebara · 304 S/S Centrifugal Pumps (2 pole & 4 pole)...
304 S/S Centrifugal Pumps (2 pole & 4 pole)
Model 3M & 3M4StainlessSteelPumps
Page 1/4
Specifications Specifications
MaterialsMaterials
Motor Data
Motor Data
Options Options/Accessories
˜ End suction centrifugal pump with closed impeller˜ Maximum working pressure: 10 bar˜ Liquid temperature: -10 °C to +90 °C (standard construction)
Stainless steel pump with closed impeller—Maximum working pressure : 10 bar—Liquid temperature: -10 °C to +90 °C (standard construction)—
˜ Pump casing: 304 Stainless Steel˜ Impeller: 304 Stainless Steel˜ Casing cover: 304 Stainless Steel˜ Shaft: 304 Stainless Steel (wetted part)
˜ Motor bracket: Cast Iron˜ Mechanical seal: Carbon/Ceramic/NBR
Pump casing: 304 Stainless Steel—Impeller: 304 Stainless Steel—Casing cover: 304 Stainless Steel—Shaft : 304 Stainless Steel (wetted part)—Motor bracket: Cast Iron—Mech. seal: Carbon/Ceramic/NBR (standard construction)—
˜ Extended shaft motors, aluminium frame˜ TEFC, 2 or 4 pole, 50 Hz˜ Insulation class F˜ IP55 Protection˜ 3 Phase (dual voltage motors)
˜ 400/690 V (5.5 kW & above) 230/400 V (up to 4.0 kW)
Extended shaft motors, aluminium frame—3 phase, TEFC, IP55, Class F—400/690 V (5.5 kW & above) 230/400 V— (up to 4.0 kW)
RangeRange
˜
˜ 1.1 to 15 kW - 3 Phase (2 pole models)
˜ 0.37 to 2.2 kW - 3 Phase (4 pole models)
32 to 50 mm Ø discharge—
1.1 to 15 kW - 3 Phase (2 pole models)—0.37 to 2.2 kW - 3 Phase (4 pole models)—
32mm Ø to 50mm Ø discharge
˜
˜
High temperature seal (110 °C) (Carbon/Ceramic/Viton seal, Viton O’ Rings)
Hard faced seal (110 °C) (SiC/SiC/Viton seal, Viton O’ Rings)
—(max. temperature 110 °C with optional seals)
Carbon steel or 304 stainless steel companion —flange kits.
Car/Cer/Viton or SiC/SiC/Viton mechanical seals
—
Over 30 models—
32 mm to 50 mm discharge size—
0.37 to 15 kW motor power—
Flows to 1200 lpm—
Heads to 70 m—
2 Pole & 4 pole versions
All the hydraulic and wetted components are manufactured
in 304 Stainless Steel
To DIN 24255
Th stainless steel pumps feature a piece volute casing that is produced using an advanced computer controlled Plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency.
The back pull-out construction permits the disassembly and overhaul of the impeller, mechanical seal and motor without removal of the suction or discharge piping, or pump casing.
The centre line discharge and foot support under the casing ensure maximum resistance to misalignment and distortion from pipe loads.
ese unique one
30
20
15
10
8
6
4
3
40
5060
80
100
To
tal
He
ad
- m
100 200 300 500 1000700 2000Capacity - lpm
50
32mm
32mm
40mm
40mm
50mm
50mm
3M4 (4 pole)
3M (2 pole)
Economical extended motor shaft design.
Model Code
3M 40 - 200 / 7.5
Motor Size kWNominal Impeller Diameter mm
Discharge Size Ø mm3M = 2 pole model, 3M4 = 4 pole model
Accessories˜
kits availableCarbon steel or 304 stainless steel companion flange
Model MATRIXPerformance Curves Model 3M & 3M4
Page 2/4
100 200 300 500 1000700 2000Capacity - lpm
30
20
109
8
7
6
5
40
50
60
70
80
90100
To
tal H
ea
d -
m
3M
2900 RPM
50-200/15
50-200/1150-200/9.2
50-160/7.5
50-160/5.550-125/4.0
50-125/3.050-125/2.2
40-200/11
40-200/7.5
40-200/5.5
40-160/4.0
40-160/3.040-125/2.2
40-125/1.5
32-200/5.5
32-200/4.0
32-200/3.032-160/2.2
32-160/1.5
32-125/1.1
3M4
1450 RPM
Capacity - lpm50 100 200 300 500 1000700
3
4
5
6
7
8
9
10
20
To
tal H
ead
- m
32-200/0.75
32-200/0.55
32-160/0.37
40-200/1.5
40-200/1.1
40-160/0.55
40-125/0.37
50-200/2.2
50-200/1.5
50-160/1.1
50-125/0.55
Model MATRIXDimensions Model 3M & 3M4Units: mm unless otherwise specified
Page 3/4
Dimensions Weight (kg)
32 mmx
50 mm
2 PolePump Model
DN2 x
DN1
3M 32-125/1.1
40 mmx
65 mm
50 mmx
65 mm
112 140 252 70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
114
118
118
119
119
119
115
115
115
115
115
115
115
115
118
118
114
114
114
114
114
140
190
190
190
190
190
190
190
212
212
212
212
212
212
212
212
190
190
190
160
160
190
240
240
240
240
240
240
240
265
265
265
265
265
265
265
265
240
240
240
210
210
80231
231
231
407
407
407
432
432
213 110110
110
110
110
110
115
115
115
115
115
115
115
125
125
125
125
125
125
125
125
24272835
38
52
25
26
37
41
53
56
67
3235
414756
64
67
102
254
254
296
296
296
296
296
296
296
296
296
296
314
254
254
254
254
254
213
213
471
471
494
494
519
539
539
595
452
491
514
539
539
595
595
723
3M 32-160/1.5
3M 32-160/2.2
3M 32-200/3.0
3M 32-200/4.0
3M 32-200/5.5
3M 40-125/1.5
3M 40-125/2.2
3M 40-160/3.0
3M 40-160/4.0
3M 40-200/5.5
3M 40-200/7.5
3M 40-200/11.0
3M 50-125/3.0
3M 50-125/2.2
3M 50-125/4.0
3M 50-160/5.5
3M 50-160/7.5
3M 50-200/9.2
3M 50-200/11.0
3M 50-200/15.0
112
112
132
132
132
132
132
132
132
160
160
160
160
160
160
160
160
160
160
160
140
140
160
160
160
160
160
160
160
180
180
180
180
180
180
180
200
200
200
180
80
80
80
80
80
80
80
80
80
100
100
100
100
100
100
100
100
100
100
100
256
256
276
278
224
224
239
N/A
278
224
239
255255
255
255
231
231
231
252
252
292
292
292
292
292
292
292
340
340
340
340
340
340
340
360
360
360
340
H1 H2 H M1 M2 N1 N2RCBA X
Dimensions Weight (kg)
32 mmx
50 mm
4 PolePump Model
DN2 x
DN1
40 mmx
65 mm
50 mmx
65 mm
70
70
70
70
70
70
70
70
70
70
70
118
119
119
115
115
115
115
115
118
114
114
190
190
190
190
212
212
212
212
212
190
160
240
240
240
240
265
265
265
265
265
240
210
219393 110
110
110
115
115
115
115
125
125
125
125
2025
28
16
21
29
31
21
29
32
36
254
296
296
296
296
296
296
296
254
254
213
393
432
371
393
452491
413
452
491
474
3M4 32-160/0.37
3M4 32-200/0.55
3M4 32-200/0.75
3M4 40-125/0.37
3M4 40-160/0.55
3M4 40-200/1.1
3M4 40-200/1.5
3M4 50-125/0.55
3M4 50-160/1.1
3M4 50-200/1.5
3M4 50-200/2.2
112
132
132
132
160
160
160
160
160
160
160
140
160
160
160
180
180
180
180
180
200
200
80
80
80
80
80
100
100
100
100
100
100
219
230
230
230
253
230
230
219
219
205 252
292
292
292
340
340
340
340
340
360
360
H1 H2 H M1 M2 N1 N2RCBA X
Specifications subject to change without notice
P
4 x 18Ø
DN DK32,40,50
& 65 Ø mm
Flanges to DIN 2532
32
75
100
140
80
110
150
95
125
165
115
145
185
DN
P
K
D
40 50 65
A
DN1
R
X
C N14 x Ø15 holes
M116
N2
M2
B
H2
H1
H
DN2
Recommendedspace for
disassembly
22
motor feet
PG21PG21
Only for model3M 50-200/15.0
FLC =Full Load Current
FLC =Full Load Current
3.2 A
3.2 A
4.5 A
6.1 A
6.1 A
6.1 A
8.7 A
8.7 A
8.7 A
10.4 A
10.4 A
10.4 A
3.2 A
4.5 A
4.5 A
13.7 A
13.7 A
16.8 A
21.9 A
21.9 A
28.3 A
1.1 A
1.1 A
1.5 A
1.5 A
2.7 A
2.7 A
3.6 A
3.6 A
4.7 A
1.5 A
2.7 A
FLC3 Phase 400 V
FLC3 Phase 400 V
Construction Model 3M & 3M4
3M 3M4 13-03
Data Sheet
Specifications subject to change without notice
EBARA PUMPS AUSTRALIA PTY. LTD.
Page 4/4
26
11
7
4
3
6
1
73
72
Typical construction
Casing Impeller CasingCover
Stamped Stamped Stamped
Casing
Impeller
O-Ring (casing)
Casing ring (rear)
Casing ring (front)
Motor bracket
Casing cover
Mechanical seal
Shaft (& rotor)
MaterialsSuits modelsDescriptionItem
304 Stainless Steel - stamped
3 Stainless Steel04 - stamped
3 Stainless Steel04 - stamped
3 Stainless Steel04 - stamped
3 Stainless Steel04 - stamped
3 Stainless Steel04
NBR
Cast Iron
All 32, 40 & 50 models
All 32, 40 & 50 models
All 32, 40 & 50 models
All models
All models
All models
32-200, 40-200, 50-125,160,200
All models
All models
Carbon/Ceramic/NBR
1
7
4
26
72
73
11
6
3
(Material refers to partin contact with liquid)
Carbon/Ceramic/Viton - High Temp. Option
SiC/SiC/Viton - Hard Face Option
Viton - when optional seals fitted
