STAGE I STAGE III - Harley-Davidson€¦ · * When installed by an authorized Harley-Davidson®...

2
AUXILIARy POWER PORT Saddlebag-mounted 12-volt power port accepts most 12-volt automotive power adaptor plugs. Kit includes power port, mounting bracket, wiring harness and all mounting hardware (requires separate purchase of Harness P/N 94624-97B). 69200091 Saddlebag Mount – fits all models (requires separate purchase of Harness P/N 94624-97B). SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II - POWER KIT * This kit was developed for the rider that wants to experience that adrenaline-pumping burst of speed while heading toward the red line. The additional power starts to build @ 3000 RPM and continues to build by up to 24% over stock at redline. Riding the bike aggressively will require downshifting to lower gears to keep the engine operating in the higher RPM range. • Ideal for riders looking for excitement and are willing to ride in the upper RPM range • Produces greater acceleration in the mid and upper RPM range • Minimally invasive only requiring opening of the cam chest • Retains Original Equipment Factory Warranty* • 50-State U.S. EPA compliant * When installed by an authorized Harley-Davidson ® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. 92500058 Chrome Covers Fits ’17-later Touring models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle ® Pro Street Tuner for proper installation. See Dealer for details. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II - TORQUE KIT * This kit was developed for the rider that wants to experience crisp throttle response and acceleration they can feel at slower speeds. The 5% increase in torque can be felt immediately off the line and continues to build by up to a 14% increase @ 4500 RPM (over H-D ® stock bikes) – the ideal power band for passing slow moving vehicles. • Delivers enhanced torque and horsepower in the low to mid RPM range • Produces passing power without a downshift or high revs • Minimally invasive only requiring opening of the cam chest • Retains Original Equipment Factory Warranty* • 50-State U.S. EPA compliant * When installed by an authorized Harley-Davidson ® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. 92500047 Chrome Covers COOLFLOW™ FAN Keep your cool on a sweltering summer day. Engineered to maximize rider and passenger comfort in high temperature situations, the CoolFlow™ Fan is the perfect addition if your bike is subjected to parade duty, rush hour traffic, or extreme temperature environments. Unlike traditional fan kits that try to cool the engine by blowing air across the cylinders and often onto your legs, the CoolFlow Fan Kit keeps the riders comfortable by pulling air away from the rear cylinder and exhaust pipe, and directing it toward the ground. The fan suction generates a low pressure region near the riders to balance the natural “up and out” convection airflow in the area behind the engine. The wind-tunnel tested fan is tucked away above the transmission, and when combined with midframe air deflectors, significantly drops the temperature the seated rider experiences. The CoolFlow Fan features switched On/Off/Auto operation on ’17-later models and On/Off on ’09-’16 models. In the “ON” mode, the fan is active at low speeds, and will turn off when the bike reaches 40 mph. As speed drops, the fan turns back on at 35 mph. This logic program prevents the fan from cycling on and off during low speed changes. On ’17-later models, the AUTO setting operates based on a combination of speed parameters and specific engine and ambient temperatures. Built to withstand the harsh motorcycle environment, the allweather CoolFlow Fan is 100% waterproof and includes everything you need for installation. The plug-and-play design is integrated with the vehicle electronics, so On/ Off/Auto fan operation is indicated in the odometer screen. Your dealer will enable this function in the Electronic Control Module (ECM) and you’re ready to roll. Odometer fan status display feature availability varies by model and may not be available for your vehicle. 26800121 Fits ’17-later FLHP models. Does not fit with Starter End Cover P/N 31400088 and 31400090. FLHRC Brazil configurations and FLHP (all regions) require separate purchase of Mid-Frame Air Deflector P/N 57200151. Separate purchase of Mid-Frame Air Deflector Kit P/N 57200157 is recommended for maximum performance on all other vehicles. Dealer Digital Technician update is required to display fan status. 26800128 Fits ’17-later FLHTP models. FLHTP models require separate purchase of Switch Pack P/N 69200173 and Switch Buttons (2) P/N 71400031. Kit Includes replacement right side Mid Frame Air Deflector. Dealer Digital Technician update is required to display fan status. Kit includes replacement right side Mid Frame Air Deflector. Dealer Digital Technician update is required. 1.25 AMP BATTERy CHARGING STATION Harley-Davidson ® Battery Charger Stations are designed to fully charge lead-acid motorcycle batteries and maintain them at proper voltage. The 4-Step Supersmart Charging Process (Initialization, Bulk, Absorption, Float) helps to prevent sulfation and reduces the effects of overcharging. Status indicator lights allow you to monitor the charging state of each connected battery. The Charging Station accepts worldwide voltage 100 to 240 VAC @ 50 to 60 Hz. Maximum charge rate of 1.25 Amperes. The charger is spark-proof and reverse polarity protected, and features short-circuit protection to prevent damage from incorrect terminal connections. Kit includes quick-disconnect 7.5 Amp fused Battery Charging Harness with ring terminals and 7.5 Amp fused alligator clip charging harness for each battery output. 2-year manufacturer’s warranty. For 12-volt AMG batteries (Not for use with Lithium LiFi batteries): 66000033 Single Station 99829-09 2-Bank Station 99847-09 4-Bank Station 66000040 10-Bank Station Supplier direct ship. To order an International battery charger, please refer to your country’s Sales Administration Representative. SADDLEBAG WALL ORGANIZER Convenient storage system equips the interior wall of your Color-Matched Saddlebags for easy access to keys, cellphones, maps, and gloves. The organizer features a combination of mesh and enclosed pouches and pockets that are sized for safe, rattle-free packing. The organizer features a rigid backing that easily attaches to the wall of the saddlebag with the Original Equipment quick-release saddlebag fasteners. Kit includes left- and right-hand organizer. Fits 14-later Touring models equipped with Color-Matched Hard Saddlebags. 90200882 EMERGENCy RESPONSE COMPONENTS The emergency response kits include the basic accessories necessary to prepare a Police motorcycle for field duty. Kit includes siren speaker, siren amplifier, PA microphone, speaker bracket and amplifier bracket. 100-watt amplifier features one-button activation, two siren tones with optional air horn (air horn activation may require additional labor charges by dealership) and PA function. Siren speaker features heavy gauge polished aluminum horn. And the noise-canceling PA microphone permits the use of the siren speaker as a PA system. COMPLETE EMERGENCY RESPONSE KIT 91453-00A Fits ’13-earlier FL models 69000057 Fits ’14-later models SIREN SPEAKER ONLY 91157-88A Speaker Assembly 91154-87 Siren Speaker Bracket Kit SIREN AMPLIFIER ONLY 91156-93 Siren Amp 91260-93A Bracket Kit, fits ’13-earlier models 69200597 Bracket Kit, fits ’14-later models PA MICROPHONE 91448-00 PA Microphone Kit SADDLEBAG GUARD RAILS Protect the sides and rear of the saddlebags from bumps and bruises. The thick-walled chrome-plated tubing and cast mounts clamp securely to the Original Equipment saddlebag guards for a seamless look. 90200561 Fits ’14-later FLHP and FLHTP models. STAGE II give it a lift CAM UPGRADE SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE IV This Stage IV Kit was developed to deliver maximum horsepower from the Milwaukee-Eight ® engine – all the way to the redline. The system-matched combination of larger displacement cylinders, free flowing CNC-Ported cylinder heads and a cam with the highest available valve lift are the starting point to building the perfect engine for the performance junkie. The addition of the large 64mm bore throttle body and high-flow injectors provides great acceleration from first gear through sixth and exceptional response at the twist of the throttle. Designed for a high level of flexibility, this package is ideal for riders who want stump pulling torque throughout the rpm range and also crave plenty of arm-pulling acceleration when you whack the throttle. The Stage IV 107 to 114 upgrade delivers up to 52% more power, and the 114 to 117 upgrade increases power by up to 40% when compared to the Original Equipment engine configurations. • Retains Original Equipment Factory Warranty * • 50-State U.S. EPA compliant Kits include: Screamin’ Eagle ® CNC Ported Cylinder Heads with Performance Valve Springs / Screamin’ Eagle 64mm Throttle Body / Screamin’ Eagle High Flow Injectors (5.5g/s) / Screamin’ Eagle 4.075" Bolt-On Cylinders / Forged 11:1 High Compression Aluminum Coated Pistons / High Performance Piston Rings / SE8-515 Cam / Screamin’ Eagle Cam Bearing Upgrade / Screamin’ Eagle High Performance Tappets / Multi-layer Coated Head Gaskets / Most neccessary gaskets and seals. 107CI TO 114CI KIT Fits ’17-later Touring models equipped with air/oil-cooled 107CI Milwaukee-Eight engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle ® Pro Street Tuner for proper installation. 92500062 Black Highlighted 114CI TO 117CI KIT Fits ’19-later Touring models equipped with air/oil cooled 114CI Milwaukee-Eight engine. Does not fit Trike models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. 92500073 Black Highlighted * When installed by an authorized Harley-Davidson ® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States. STAGE IV top it off STAGE III + CYLINDER HEADS + THROTTLE BODY SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE III This kit was developed for the rider looking for a solid seat of the pants increase you can feel – every time you roll on the throttle. The increase in displacement and the bump in compression deliver a significant increase in torque and power over stock. The Stage III 107 to 114 upgrade delivers up to 39% more power, and the 114 to 117 upgrade increases power by up to 24% when compared to the Original Equipment engine configurations. • Retains Original Equipment Factory Warranty * • 50-State U.S. EPA compliant Kits include: Screamin’ Eagle 4.075” Bolt-On Cylinders / Forged 11:1 High Compression Aluminum Coated Pistons / High performance Piston Rings / SE8-498 Cam / Screamin’ Eagle Performance Valve Springs / Screamin’ Eagle High Performance Tappets / Multi-layer coated Head Gaskets / Cylinder Base and Cam Cover Gaskets / Most necessary gaskets and seals 107CI TO 114CI KIT Fits ’17-later Touring models equipped with 107CI Milwaukee-Eight ® engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. 92500056 Black Highlighted 92500070 Black Non-Highlighted 114CI TO 117CI KIT Fits ’17-later Touring models equipped with 114CI Milwaukee-Eight ® engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. 92500072 Black Highlighted 92500071 Black Non-Highlighted * When installed by an authorized Harley-Davidson ® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States. STAGE III pump up the volume STAGE II + BIG BORE CYLINDERS + PISTONS SCREAMIN’ EAGLE® HIGH-FLOW AIR CLEANER – MILWAUKEE-EIGHT® ENGINE Screamin’ Eagle ® High Flow Air Cleaner Kits allow free breathing and unobstructed airflow to your Milwaukee-Eight ® engine – while maintaining a subtle Original Equipment look. These kits feature a die-cast back plate sized to provide an open-element function that permits airflow around the entire perimeter of the air cleaner and through the ram air opening at the front. Your engine gets more air, and you feel more power throughout the rev range. Kit includes the die-cast back plate, a high-flow oiled-cotton filter element, all required installation gaskets and hardware and a diamond-cut Screamin’ Eagle ® medallion to finish the look. Kits are available with your choice of chrome or textured black back plate to match your customizing style. 50-State U.S. EPA compliant. Fits ’17-later Touring and Trike models. Not compatible with air cleaner cover on CVO Touring models. All models require ECM calibration with Screamin’ Eagle ® Pro Street Tuner for proper installation. ECE compliant on ’17-later CVO Touring models. 29400245A Black SCREAMIN’ EAGLE® STREET CANNON PERFORMANCE SLIP-ON MUFFLERS – 4.5'' Dialed in to enhance the performance of the Milwaukee-Eight ® engine, these slip-on mufflers feature a large inlet for improved airflow. When teamed with a free-flowing air cleaner, these Street Cannon mufflers deliver horsepower and torque gains you can feel. The large 4.5" diameter mufflers are tuned to provide a rich exhaust note, a deep bass rumble, and great throaty sound when you roll on the throttle. But to strike a balance with your neighbors, the large internal volume and strategically designed baffles help maintain the peace at partial throttle. The large diameter body adds a muscular look to your ride, and the newly designed mounts keep the mufflers tucked in close to the bags for a clean profile. These Street Cannon mufflers feature a die-cast Screamin’ Eagle ® medallion on their flanks, and can be fitted with a wide variety of styled muffler end caps to provide the perfect finishing touch. Fits ’17-later Touring models. Does not fit Trike models. Installation requires separate purchase of Muffler Clamps P/N 65900012 and 65900015. Requires separate purchase of end caps. All models require ECM calibration with Screamin’ Eagle ® Pro Street Tuner for proper installation. 50-State U.S. EPA compliant. 64900552A Chrome 64900553A Black STAGE I MOVE MORE AIR & FUEL INTAKE + EXHAUST + TUNING PRO STREET TUNER The Pro Street Tuner permits tunability to optimize performance and driveability without compromising fuel efficiency, emission levels, engine durability, or 50-State U.S. EPA compliance. And unlike other race tuners or engine controllers, the Screamin’ Eagle ® Pro Street Tuner does not impact your Harley-Davidson ® factory warranty coverage. • Offers base calibrations for your chosen Screamin’ Eagle ® Stage upgrade • Constantly monitors the engine operation in the Part Throttle Cruising Range • Enables manual adjustments to fine-tune parameters within part and full throttle ranges For use with ’17-later Touring models. Requires separate purchase of model-specific Tuner Cable. 41000008C 26800152 Fits ’09-’16 Touring models with or without Original Equipment Mid-Frame Air Deflectors. Separate purchase of Mid-Frame Air Deflector Kit P/N 58002-09A is recommended for maximum performance if not equipped. 20 30 40 50 60 70 80 90 100 110 120 130 2 2.5 3.5 4.5 5.5 3 4 5 6 6.5 7 Milwaukee-Eight 114 Touring Stage Kits – Horsepower Comparisons Engine Speed (rpm x 1000) Corrected Rear Wheel Horsepower (hp) Stock 114CI Stage I 114CI – Round Extreme Flow, Street Cannons Stage II 114CI – TQ Cam, Heavy Breather, Street Cannons Stage II 114CI – HP Cam, Wedge A/C, Street Cannons Stage III 114 to 117CI – Heavy Breather A/C, Street Cannons Stage IV 114 to 117CI – Ventilator A/C, High-Flow Exhaust 20 30 40 50 60 70 80 90 100 110 120 130 2 2.5 3.5 4.5 5.5 3 4 5 6 6.5 7 Milwaukee-Eight 114 Touring Stage Kits – Torque Comparisons Engine Speed (rpm x 1000) Corrected Rear Wheel Torque (lb-ft) Stock 114CI Stage I 114CI – Round Extreme Flow, Street Cannons Stage II 114CI – TQ Cam, Heavy Breather, Street Cannons Stage II 114CI – HP Cam, Wedge A/C, Street Cannons Stage III 114 to 117CI – Heavy Breather A/C, Street Cannons Stage IV 114 to 117CI – Ventilator A/C, High-Flow Exhaust 11.94 SECONDS STAGE III 18.44 SECONDS STOCK CONFIGURATION 0-100 MPH ACCELERATION COMPARISON * 0.00 2.00 4.00 6.00 8.00 SECONDS 10.00 12.00 14.00 16.00 18.00 20.00 *Motorcycle performance data recorded by the Michigan State Police Precision Driving Unit during the September, 2016 Police Vehicle Evaluation as directed by the National Institute of Justice (NIJ). This third-party performance testing is completed on a closed course to provide law enforcement an unbiased evaluation of Harley-Davidson and other manufacturers’ vehicles. 20 30 40 50 60 70 80 90 100 110 120 130 20 30 40 50 60 70 80 90 100 110 120 130 2 2.5 3.5 4.5 5.5 3 4 5 6 6.5 7 Milwaukee-Eight 114 Stock vs 114 Stage II** Engine Speed (rpm x 1000) Corrected Rear Wheel Torque (lb-ft) Stock 114 TQ 114 Stage II “POWER” TQ 114 Stage II “TORQUE” TQ Stock 114 HP 114 Stage II “POWER” HP 114 Stage II “TORQUE” HP ** FLHXSE 114 Stage II “POWER” with Ventilator A/C & Street Cannon Mufflers ** FLHXSE 114 Stage II “TORQUE” with Heavy Breather A/C & Street Cannon Mufflers Corrected Rear Wheel Horsepower (hp)

Transcript of STAGE I STAGE III - Harley-Davidson€¦ · * When installed by an authorized Harley-Davidson®...

Page 1: STAGE I STAGE III - Harley-Davidson€¦ · * When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited

AUXILIARy POWER PORT Saddlebag-mounted 12-volt power port accepts most 12-volt automotive power adaptor plugs. Kit includes power port, mounting bracket, wiring harness and all mounting hardware (requires separate purchase of Harness P/N 94624-97B).

69200091 Saddlebag Mount – fits all models (requires separate purchase of Harness P/N 94624-97B).

SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II - POWER KIT*

This kit was developed for the rider that wants to experience that adrenaline-pumping burst of speed while heading toward the red line. The additional power starts to build @ 3000 RPM and continues to build by up to 24% over stock at redline. Riding the bike aggressively will require downshifting to lower gears to keep the engine operating in the higher RPM range.

• Ideal for riders looking for excitement and are willing to ride in the upper RPM range

• Produces greater acceleration in the mid and upper RPM range

• Minimally invasive only requiring opening of the cam chest

• Retains Original Equipment Factory Warranty*

• 50-State U.S. EPA compliant

* When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty.

92500058 Chrome Covers

Fits ’17-later Touring models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation. See Dealer for details.

SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II - TORQUE KIT*

This kit was developed for the rider that wants to experience crisp throttle response and acceleration they can feel at slower speeds. The 5% increase in torque can be felt immediately off the line and continues to build by up to a 14% increase @ 4500 RPM (over H-D® stock bikes) – the ideal power band for passing slow moving vehicles.

• Delivers enhanced torque and horsepower in the low to mid RPM range

• Produces passing power without a downshift or high revs

• Minimally invasive only requiring opening of the cam chest

• Retains Original Equipment Factory Warranty*

• 50-State U.S. EPA compliant

* When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty.

92500047 Chrome Covers

COOLFLOW™ FANKeep your cool on a sweltering summer day. Engineered to maximize rider and passenger comfort in high temperature situations, the CoolFlow™ Fan is the perfect addition if your bike is subjected to parade duty, rush hour traffic, or extreme temperature environments. Unlike traditional fan kits that try to cool the engine by blowing air across the cylinders and often onto your legs, the CoolFlow Fan Kit keeps the riders comfortable by pulling air away from the rear cylinder and exhaust pipe, and directing it toward the ground. The fan suction generates a low pressure region near the riders to balance the natural “up and out” convection airflow in the area behind the engine. The wind-tunnel tested fan is tucked away above the transmission, and when combined with midframe air deflectors, significantly drops the temperature the seated rider experiences. The CoolFlow Fan features switched On/Off/Auto operation on ’17-later models and On/Off on ’09-’16 models. In the “ON” mode, the fan is active at low speeds, and will turn off when the bike reaches 40 mph. As speed drops, the fan turns back on at 35 mph. This logic program prevents the fan from cycling on and off during low speed changes. On ’17-later models, the AUTO setting operates based on a combination of speed parameters and specific engine and ambient temperatures. Built to withstand the harsh motorcycle environment, the allweather CoolFlow Fan is 100% waterproof and includes everything you need for installation. The plug-and-play design is integrated with the vehicle electronics, so On/Off/Auto fan operation is indicated in the odometer screen. Your dealer will enable this function in the Electronic Control Module (ECM) and you’re ready to roll. Odometer fan status display feature availability varies by model and may not be available for your vehicle.

26800121 Fits ’17-later FLHP models. Does not fit with Starter End Cover P/N 31400088 and 31400090. FLHRC Brazil configurations and FLHP (all regions) require separate purchase of Mid-Frame Air Deflector P/N 57200151. Separate purchase of Mid-Frame Air Deflector Kit P/N 57200157 is recommended for maximum performance on all other vehicles. Dealer Digital Technician update is required to display fan status.

26800128 Fits ’17-later FLHTP models. FLHTP models require separate purchase of Switch Pack P/N 69200173 and Switch Buttons (2) P/N 71400031. Kit Includes replacement right side Mid Frame Air Deflector. Dealer Digital Technician update is required to display fan status. Kit includes replacement right side Mid Frame Air Deflector. Dealer Digital Technician update is required.

1.25 AMP BATTERy CHARGING STATION Harley-Davidson® Battery Charger Stations are designed to fully charge lead-acid motorcycle batteries and maintain them at proper voltage. The 4-Step Supersmart Charging Process (Initialization, Bulk, Absorption, Float) helps to prevent sulfation and reduces the effects of overcharging. Status indicator lights allow you to monitor the charging state of each connected battery. The Charging Station accepts worldwide voltage 100 to 240 VAC @ 50 to 60 Hz. Maximum charge rate of 1.25 Amperes. The charger is spark-proof and reverse polarity protected, and features short-circuit protection to prevent damage from incorrect terminal connections. Kit includes quick-disconnect 7.5 Amp fused Battery Charging Harness with ring terminals and 7.5 Amp fused alligator clip charging harness for each battery output. 2-year manufacturer’s warranty. For 12-volt AMG batteries (Not for use with Lithium LiFi batteries):

66000033 Single Station 99829-09 2-Bank Station 99847-09 4-Bank Station 66000040 10-Bank Station

Supplier direct ship. To order an International battery charger, please refer to your country’s Sales Administration Representative.

SADDLEBAG WALL ORGANIZER Convenient storage system equips the interior wall of your Color-Matched Saddlebags for easy access to keys, cellphones, maps, and gloves. The organizer features a combination of mesh and enclosed pouches and pockets that are sized for safe, rattle-free packing. The organizer features a rigid backing that easily attaches to the wall of the saddlebag with the Original Equipment quick-release saddlebag fasteners. Kit includes left- and right-hand organizer.

Fits ’14-later Touring models equipped with Color-Matched Hard Saddlebags.

90200882

EMERGENCy RESPONSE COMPONENTS The emergency response kits include the basic accessories necessary to prepare a Police motorcycle for field duty. Kit includes siren speaker, siren amplifier, PA microphone, speaker bracket and amplifier bracket. 100-watt amplifier features one-button activation, two siren tones with optional air horn (air horn activation may require additional labor charges by dealership) and PA function. Siren speaker features heavy gauge polished aluminum horn. And the noise-canceling PA microphone permits the use of the siren speaker as a PA system.

COMPLETE EMERGENCY RESPONSE KIT 91453-00A Fits ’13-earlier FL models 69000057 Fits ’14-later models

SIREN SPEAKER ONLY 91157-88A Speaker Assembly 91154-87 Siren Speaker Bracket Kit

SIREN AMPLIFIER ONLY 91156-93 Siren Amp 91260-93A Bracket Kit, fits ’13-earlier models 69200597 Bracket Kit, fits ’14-later models

PA MICROPHONE 91448-00 PA Microphone Kit

SADDLEBAG GUARD RAILSProtect the sides and rear of the saddlebags from bumps and bruises. The thick-walled chrome-plated tubing and cast mounts clamp securely to the Original Equipment saddlebag guards for a seamless look.

90200561 Fits ’14-later FLHP and FLHTP models.

STAGE IIgive it a lift

CAM UPGRADE

SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE IV This Stage IV Kit was developed to deliver maximum horsepower from the Milwaukee-Eight® engine – all the way to the redline. The system-matched combination of larger displacement cylinders, free flowing CNC-Ported cylinder heads and a cam with the highest available valve lift are the startingpoint to building the perfect engine for the performance junkie. The addition of the large 64mm bore throttle body and high-flow injectors provides great acceleration from first gear through sixth and exceptional response at the twist of the throttle. Designed for a high level of flexibility, this package is ideal for riders who want stump pulling torque throughout the rpm range and also crave plenty of arm-pulling acceleration when you whack the throttle. The Stage IV 107 to 114 upgrade delivers up to 52% more power, and the 114 to 117 upgrade increases power by up to 40% when compared to the Original Equipment engine configurations.

• Retains Original Equipment Factory Warranty*

• 50-State U.S. EPA compliant

Kits include: Screamin’ Eagle® CNC Ported Cylinder Heads with Performance Valve Springs / Screamin’ Eagle 64mm Throttle Body / Screamin’ Eagle High Flow Injectors (5.5g/s) / Screamin’ Eagle 4.075" Bolt-On Cylinders / Forged 11:1 High Compression Aluminum Coated Pistons / High Performance Piston Rings / SE8-515 Cam / Screamin’ Eagle Cam Bearing Upgrade / Screamin’ Eagle High Performance Tappets / Multi-layer Coated Head Gaskets / Most neccessary gaskets and seals.

107CI TO 114CI KITFits ’17-later Touring models equipped with air/oil-cooled 107CI Milwaukee-Eight engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation.

92500062 Black Highlighted

114CI TO 117CI KITFits ’19-later Touring models equipped with air/oil cooled 114CI Milwaukee-Eight engine. Does not fit Trike models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

92500073 Black Highlighted

* When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.

STAGE IVtop it off

STAGE III + CYLINDER HEADS + THROTTLE BODY

SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE IIIThis kit was developed for the rider looking for a solid seat of the pants increase you can feel – every time you roll on the throttle. The increase in displacement and the bump in compression deliver a significant increase in torque and power over stock. The Stage III 107 to 114 upgrade delivers up to 39% more power, and the 114 to 117 upgrade increases power by up to 24% when compared to the Original Equipment engine configurations.

• Retains Original Equipment Factory Warranty*

• 50-State U.S. EPA compliant

Kits include: Screamin’ Eagle 4.075” Bolt-On Cylinders / Forged 11:1 High Compression Aluminum Coated Pistons / High performance Piston Rings / SE8-498 Cam / Screamin’ Eagle Performance Valve Springs / Screamin’ Eagle High Performance Tappets / Multi-layer coated Head Gaskets / Cylinder Base and Cam Cover Gaskets / Most necessary gaskets and seals

107CI TO 114CI KITFits ’17-later Touring models equipped with 107CI Milwaukee-Eight® engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

92500056 Black Highlighted 92500070 Black Non-Highlighted

114CI TO 117CI KITFits ’17-later Touring models equipped with 114CI Milwaukee-Eight® engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

92500072 Black Highlighted 92500071 Black Non-Highlighted

* When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited warranty. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.

STAGE IIIpump up the volume

STAGE II + BIG BORE CYLINDERS + PISTONS

SCREAMIN’ EAGLE® HIGH-FLOW AIR CLEANER – MILWAUKEE-EIGHT® ENGINEScreamin’ Eagle® High Flow Air Cleaner Kits allow free breathing and unobstructed airflow to your Milwaukee-Eight® engine – while maintaining a subtle Original Equipment look. These kits feature a die-cast back plate sized to provide an open-element function that permits airflow around the entire perimeter of the air cleaner and through the ram air opening at the front. Your engine gets more air, and you feel more power throughout the rev range. Kit includes the die-cast back plate, a high-flow oiled-cotton filter element, all required installation gaskets and hardware and a diamond-cut Screamin’ Eagle® medallion to finish the look. Kits are available with your choice of chrome or textured black back plate to match your customizing style. 50-State U.S. EPA compliant.

Fits ’17-later Touring and Trike models. Not compatible with air cleaner cover on CVO™ Touring models. All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation. ECE compliant on ’17-later CVO™ Touring models.

29400245A Black

SCREAMIN’ EAGLE® STREET CANNON PERFORMANCE SLIP-ON MUFFLERS – 4.5'' Dialed in to enhance the performance of the Milwaukee-Eight® engine, these slip-on mufflers feature a large inlet for improved airflow. When teamed with a free-flowing air cleaner, these Street Cannon mufflers deliver horsepower and torque gains you can feel. The large 4.5" diameter mufflers are tuned to provide a rich exhaust note, a deep bass rumble, and great throaty sound when you roll on the throttle. But to strike a balance with your neighbors, the large internal volume and strategically designed baffles help maintain the peace at partial throttle. The large diameter body adds a muscular look to your ride, and the newly designed mounts keep the mufflers tucked in close to the bags for a clean profile. These Street Cannon mufflers feature a die-cast Screamin’ Eagle® medallion on their flanks, and can be fitted with a wide variety of styled muffler end caps to provide the perfect finishing touch. Fits ’17-later Touring models. Does not fit Trike models. Installation requires separate purchase of Muffler Clamps P/N 65900012 and 65900015. Requires separate purchase of end caps. All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation. 50-State U.S. EPA compliant.

64900552A Chrome 64900553A Black

STAGE IMOVE MORE AIR & FUEL

INTAKE + EXHAUST + TUNING

PRO STREET TUNER The Pro Street Tuner permits tunability to optimize performance and driveability without compromising fuel efficiency, emission levels, engine durability, or 50-State U.S. EPA compliance. And unlike other race tuners or engine controllers, the Screamin’ Eagle® Pro Street Tuner does not impact your Harley-Davidson® factory warranty coverage.

• Offers base calibrations for your chosen Screamin’ Eagle® Stage upgrade

• Constantly monitors the engine operation in the Part Throttle Cruising Range

• Enables manual adjustments to fine-tune parameters within part and full throttle ranges

For use with ’17-later Touring models. Requires separate purchase of model-specific Tuner Cable.

41000008C

26800152 Fits ’09-’16 Touring models with or without Original Equipment Mid-Frame Air Deflectors. Separate purchase of Mid-Frame Air Deflector Kit P/N 58002-09A is recommended for maximum performance if not equipped.

20

30

40

50

60

70

80

90

100

110

120

130

20

30

40

50

60

70

80

90

100

110

120

130

2 2.5 3.5 4.5 5.53 4 5 6 6.5 7

Milwaukee-Eight 114 Touring Stage Kits – Horsepower Comparisons

Engine Speed (rpm x 1000)

Corr

ecte

d Re

ar W

heel

Hor

sepo

wer (

hp)

Stock 114CIStage I 114CI – Round Extreme Flow, Street CannonsStage II 114CI – TQ Cam, Heavy Breather, Street CannonsStage II 114CI – HP Cam, Wedge A/C, Street CannonsStage III 114 to 117CI – Heavy Breather A/C, Street CannonsStage IV 114 to 117CI – Ventilator A/C, High-Flow Exhaust

20

30

40

50

60

70

80

90

100

110

120

130

20

30

40

50

60

70

80

90

100

110

120

130

2 2.5 3.5 4.5 5.53 4 5 6 6.5 7

Milwaukee-Eight 114 Touring Stage Kits – Torque Comparisons

Engine Speed (rpm x 1000)

Corr

ecte

d Re

ar W

heel

Torq

ue (l

b-ft)

Stock 114CIStage I 114CI – Round Extreme Flow, Street CannonsStage II 114CI – TQ Cam, Heavy Breather, Street CannonsStage II 114CI – HP Cam, Wedge A/C, Street CannonsStage III 114 to 117CI – Heavy Breather A/C, Street CannonsStage IV 114 to 117CI – Ventilator A/C, High-Flow Exhaust 11.94

SECONDS

STAGE III

18.44SECONDS

STOCK CONFIGURATION

0-100 MPH ACCELERATION COMPARISON*

0.00 2.00 4.00 6.00 8.00SECONDS 10.00 12.00 14.00 16.00 18.00 20.00

*Motorcycle performance data recorded by the Michigan State Police Precision Driving Unit during the September, 2016 Police Vehicle Evaluation as directed by the National Institute of Justice (NIJ). This third-party performance testing is completed on a closed course to provide law enforcement an unbiased evaluation of Harley-Davidson and other manufacturers’ vehicles.

20

30

40

50

60

70

80

90

100

110

120

130

20

30

40

50

60

70

80

90

100

110

120

130

2 2.5 3.5 4.5 5.53 4 5 6 6.5 7

Milwaukee-Eight 114 Stock vs 114 Stage II**

Engine Speed (rpm x 1000)

Corre

cted

Rea

r Whe

el To

rque

(lb-

ft)

Stock 114 TQ 114 Stage II “POWER” TQ 114 Stage II “TORQUE” TQ Stock 114 HP 114 Stage II “POWER” HP 114 Stage II “TORQUE” HP ** FLHXSE 114 Stage II “POWER” with Ventilator A/C & Street Cannon Mufflers

** FLHXSE 114 Stage II “TORQUE” with Heavy Breather A/C & Street Cannon Mufflers

Corre

cted

Rea

r Whe

el H

orse

powe

r (hp

)

Page 2: STAGE I STAGE III - Harley-Davidson€¦ · * When installed by an authorized Harley-Davidson® Dealer at the time of vehicle delivery, these kits do not impact the vehicle’s limited

2020

PART

S & A

CCES

SORI

ES

ACCSPARTS &

POLICE TOUR-PAK® CARRIER SYSTEMDesigned for ease of installation and service, the Harley-Davidson® Police Tour-Pak® carrier system is a “plug-and-play” option for Touring Police models. The Tour-Pak® carrier system plugs into the vehicle wiring harness, eliminating the cutting and splicing required with other light boxes. The Tour-Pak® carrier system features an LED brake light with integrated amber turn signals, a single center-mount key lock, dual positive-catch latches, hinged metal stays that keep the lid open and dual adjustable equipment shelves for mounting and storage of custom installed equipment.

The Tour-Pak® carrier system is available pre-drilled for the side and rear LED lights (sold separately), or as a “Box only” kit. Pre-drilled versions feature a self-contained auxiliary battery (Auxiliary Battery P/N 65989-97C sold separately) which provides additional reserve capacity and is isolated from the vehicle battery when the ignition is switched off. Pre-drilled versions also include an onboard battery charger with external 110-volt power hookup, 12-volt accessory outlet, fused terminal block, grounding block; also contains the Run/Brake/Turn Signal Strip Light and wiring harness with watertight connectors.

Fits all FLHP and FLHTP models:

54177-10 White, Not Drilled 54178-10 Black, Not Drilled 54179-10 White, Pre-Drilled 54180-10 Black, Pre-Drilled 53196-09 Tour-Pak® carrier mounting Adaptor Plate, Required

for ’09-later models

68000137 Tour-Pak® carrier Wiring Harness Adaptor Kit, Required for ’14-later models

POLICE TOUR-PAK® CARRIER LED LIGHTS Equip your Police Tour-Pak® carrier system for maximum visibility. These fast-reacting bright LED lamps feature clear lenses and selectable flashing pattern. Sold individually, these lamps are available in your choice of Red, Blue, and split Red/Blue LEDs.

Fits Police Tour-Pak® carrier P/N 54180-10 and 54179-10. Also fits Police Tour-Pak® carrier P/N 53631-04 and 53632-04 when all LED lights are replaced, and Wiring Harness P/N.

70697-10 (1), Trim Ring P/N 72641-10 (3) and Washer P/N 6789 (6) are installed. 69816-10 Red LED69940-10 Blue LED 69941-10 Red/Blue LED

PAR-36 FRONT LED EMERGENCy LAMP KITSKits include extended lens LED lamps, 4-point LED flasher module and wiring harness. Flasher module is designed to power front LED Emergency lamps and LED Engine Guard Light Kit (sold separately).

Fits all FLHP and FLHTP models: 69250-04A Red/Blue LED Lamp Kit69262-04A Red/Red LED Lamp Kit69263-04A Blue/Blue LED Lamp Kit

POLE STROBE LED LAMPTelescoping pole-mounted 360-degree strobe beacon. The self-contained LED strobe lamps are available with blue or red 4-1/2” H x 5-1/2” diameter lens. Does not fit with Police Tour-Pak® carrier systems (’13-earlier models). Separate purchase of model-specific Pole Lamp Mounting Bracket is required.

BLUE STROBE67623-88A Fits ’13-earlier FL models 68000135 Fits ’14-later FL models

RED STROBE67624-88A Fits ’13-earlier FL models 68000136 Fits ’14-later FL models

POLE LIGHT BRACKET91379-09 Fits ’09-’13 models 57300036 Fits ’14-later FL models (can be used with or without Police Tour-Pak® carrier)

EMERGENCy HEADLAMP WITH BUILT-IN STROBEMake your motorcycle more visible to oncoming traffic. Kit includes headlamp and strobe bulbs, headlamp housing, 2-point strobe power supply, and required installation hardware. Restricted part – requires written authorization from requesting agency.

90050-02A Fits ’99-’13 FLHP and FLHTP models 67700222 Fits ’14-later FL models

MIRRORS WITH FLASHING LED POLICE EMERGENCy LAMPSSmoked lenses hide bands of red or blue LED lamps that work as fast-acting auxiliary flashing emergency lights when emergency lamps are activated. The forward-facing eye-level lamps command additional attention from oncoming traffic. The wiring is concealed in the housing and stem, and is easily connected to the Original Equipment Incandescent Front Emergency Lights with no additional parts, or can be plug-and-play integrated with the PAR-36 Front LED Emergency Lamps or the Engine Guard LED Lamps using Wiring Interface Module P/N 69200206.

Fits ’97-later Police vehicles with Original Equipment Emergency Lamps or XL Police models with Emergency Lamp Kit P/N 68746-03B. Installation on models equipped with Harley-Davidson® PAR-36 Front LED Emergency Lamp Kit or Engine Guard LED Light Kit require separate purchase of Wiring Interface Module P/N 69200206.

56000001 Red/Blue 56000019 Red/Red 56000020 Blue/Blue

ENGINE GUARD LED LIGHT KITThe lamps clamp to 1-1/4” diameter tubular engine guards, and are adjustable for left-right and up-down positioning. Kits include 2 LED lamps, your choice of color (listed below) and installation hardware. These are powered by any PAR-36 Emergency Lamp Kit sold above. An LED Flasher Module (P/N 69200860) and Wiring Harness (P/N 70673-04) are required if installing without a PAR-36 Emergency Lamp Kit. Lenses feature Bar & Shield logo lens covers.

Fits all FLHP and FLHTP models:

69251-04 Red/Blue Engine Guard LED Light Kit 69264-04 Red/Red Engine Guard LED Light Kit 69265-04 Blue/Blue Engine Guard LED Light Kit 70671-04 4-Point LED Flasher Module 70673-04 Wiring Harness

FRONT EMERGENCy LAMP KITKit includes 1 red and 1 blue incandescent emergency lamp, housings, mounting brackets, switches and wiring harness.

68746-03B Fits ’88-later XL Police models. 41000203 Fits ’14-later XL Police models.

©2019 H-D or its affiliates. Harley-Davidson, Harley, H-D, and the Bar and Shield Logo are among the trademarks of H-D U.S.A., LLC. All product descriptions are based on available information at the time of publication.