ST10+ FIRMARE UPDATE - Yuneec USA...Click on ‘System Update' and click ‘OK’. The ST10+ will...
2
First transfer all the ST10+ firmware files to an empty microSD card and insert it into the microSD card slot underneath of the ST10+’s baery. Power on the ST10+, select 'System Sengs' and click ‘OK’. Click 'About Flight Mode Control' and 'Radio Control Update', then select TX file 'st10plus_tx_b32.bin' from the microSD card and click ' Update Tx'. Aſter updang, click 'Finish'. 1 2 3 ST10+ FIRMARE UPDATE The ST10+ firmware files include a 'firmware' document and an 'update' zip. The 'update.zip' is the ST10+ system firm- ware. Do not extract it. The firmware document, includes a 'tx' folder that should never be renamed. The 'tx' folder contains the firmware 'st10plus_tx_b32.bin'. st10+v01b05c
Transcript of ST10+ FIRMARE UPDATE - Yuneec USA...Click on ‘System Update' and click ‘OK’. The ST10+ will...
First transfer all the ST10+ firmware files to an empty microSD card and insert it into the microSD card slot underneath of the ST10+’s battery.
Power on the ST10+, select 'System Settings' and click ‘OK’.
Click 'About Flight Mode Control' and 'Radio Control Update', then select TX file 'st10plus_tx_b32.bin' from the microSD card and click ' Update Tx'. After updating, click 'Finish'.
1
2
3
ST10+ FIRMARE UPDATE
The ST10+ firmware files include a 'firmware' document and an 'update' zip. The 'update.zip' is the ST10+ system firm-ware. Do not extract it.
The firmware document, includes a 'tx' folder that should never be renamed. The 'tx' folder contains the firmware 'st10plus_tx_b32.bin'.
st10+v01b05c
Click on ‘System Update' and click ‘OK’. The ST10+ will automatically detect the ST10+ System firmware file on the microSD card and will update it.Check 'Build number' at any time to see if it is updated.
4
ST10+ FIRMARE UPDATE
st10+v01b29c
st10plus_tx_b32.bin st10plus_tx_b32.bin
