SSTB-SUB-3R Install

SSTB - 3R SecureStor Universal 3 rd Row Vault Mounting Instructions CAUTION: Always check before drilling or screwing to be certain not to hit anything (fuel tank, lines, wiring, etc) beneath the carpet, the transmission hump or under the vehicle. 1: Attach the (2) supplied mounting brackets to the pems in the sides of the vault with the 3/8” hardware provided. 2: Position the vault in the vehicle in the desired location. Preferred mounting method: attach the mounting brackets to factory tie-downs or seat belt bolts (if available). If not available, mark the floor and drill the (4) 3/8” mounting holes. Optional: (4) flat brackets are included to allow more mounting choices. 3: Secure the vault to the vehicle floor with 3/8” hardware. 01/10

Upload
lund-industries-inc
Category

Documents
view
212
download
0

Embed Size (px):

description

1: Attach the (2) supplied mounting brackets to the pems in the sides of the vault with the 3/8” hardware provided. 2: Position the vault in the vehicle in the desired location. Preferred mounting method: attach the mounting brackets to factory tie-downs or seat belt bolts (if available). If not available, mark the floor and drill the (4) 3/8” mounting holes. Optional: (4) flat brackets are included to allow more mounting choices. 01/10

Transcript of SSTB-SUB-3R Install

SSTB - 3R SecureStor Universal3rd Row Vault Mounting Instructions

CAUTION: Always check before drilling or screwing to becertain not to hit anything (fuel tank, lines, wiring, etc) beneath

the carpet, the transmission hump or under the vehicle.

1: Attach the (2) supplied mounting brackets to the pems in the sides of the vault withthe 3/8” hardware provided.

2: Position the vault in the vehicle in the desired location. Preferred mounting method: attachthe mounting brackets to factory tie-downs or seat belt bolts (if available). If not available, markthe floor and drill the (4) 3/8” mounting holes. Optional: (4) flat brackets are included to allowmore mounting choices.

3: Secure the vault to the vehicle floor with 3/8” hardware.

01/10