SSP Assignment_ 2011 Batch_3

8/13/2019 SSP Assignment_ 2011 Batch_3

1/5

- 1 -

KUMARAGURU COLLEGE OF TECHNOLOGY: COIMBATORE 641049(An Autonomous Institution affiliated to Anna University, Coimbatore)

Department of Mechatronics Engineering Course & Branch : B.E / Mechatronics EngineeringYear : IIISubject & code : Sensors and Signal Processing & MCT 113Assignment circular dated 26.12.2013.

Batch

No.

ROLL

NUMBER

NAME OF THE STUDENT Assignment Topic Seminar presentation

1 11BMC01 ADITYAN AReview of ultrasonicsensors andmeasurement

Review the applicationof sound intensitymeasurement

11BMC02 ARUN KUMAR V11BMC03 ARUN VIJAY T M

2

11BMC04 ARUNKUMAR V K Review of Humiditymeasurement

Review of onboardwireless datatransmission systems

11BMC05 ATHIBAN B11BMC06 BALAJI A

3

11BMC07 BALAKRISHNAN P Review of nuclearradiation sensors

Review filteringtechnique for onboarddata acquisition ofstrain gauge fitted invehicle suspension

11BMC08 BONEY THOMAS K T

11BMC09 CHARANRAJ G

411BMC10 DEEPAK V Review of gas sensors Review of Carbon nano

particle in gas detectionsensors.

11BMC11 DINESH T5 11BMC12 DINESH KUMAR B

6

11BMC13 DIVAGAR G Review of touch screensensors

Review of very nearfield acoustics

11BMC14GOKUL KRISHNANV

11BMC15 GOWTHAM D

7

11BMC16 HARIHARAN C Review of pressuremeasurement

Review of Non contacttype vibrationmeasurement

11BMC17 JAGADHEESH A11BMC18 JASWANTH V

8

11BMC19KALYANA KUMARV

Review of torquemeasurement

Review Acousticsensors

11BMC20 KARTHIK RAM J11BMC21 KARTHIKEYAN N

9

11BMC22 KINGSTON D Review of chemicalcompositionmeasurement

Review of underwateracoustic measurement11BMC23 KOKILA V

11BMC24 KUMARESAN M

10

11BMC25 LAVANYA N Review of Bio medicalrecording device

Review of cardiomeasurement andanalysis

11BMC26 MADHUBALAN S11BMC27 MICHAEL JONES

11

11BMC28 MUTHU KUMAR S Review of signalconditioning of microsensors

Review of Bio medicalrespiratory sensors11BMC29 MYTHILI E

11BMC30 NISHANTH M

ISO9001:2000


2/5

- 2 -

SL.NO

ROLL

NUMBER NAME OF THE STUDENT

Assignment Topic Seminar presentation

12

11BMC31 NIVEDITHA K Review of digitaltransmission systems

Review of datalogging11BMC32 POOVARASAN B

11BMC33 PRABAKARAN V

13

11BMC34PRADYUMNAVASUDEVAN

Review of digitalfiltering methods for

control system

Review of digitaldisplay device

11BMC35 PRASANTH K11BMC36 PRAVEEN S

14

11BMC37 PREM KUMAR E Review of digitaldisplay device

Review of digitalfiltering methods forcontrol system

11BMC38 RAJAGOPAL B.M11BMC39 RAMASAMY A N

15

11BMC40 RAMDHASH V Review of data logging Review of digitaltransmission systems11BMC41 RAMESH E

11BMC42 RAMESH PANDIAN N

16

11BMC43 RAVI PRASANTH UReview of Bio medicalrespiratory sensors

Review of signalconditioning of microsensors11BMC44 ROSHAN SIMON

11BMC45 SAHAYA ANTONYABISHEK S

17

11BMC46 SANDEEP S Review of cardiomeasurement andanalysis

Review of Bio medicalrecording device11BMC47 SANGEETH T

11BMC48 SARAVANAKUMAR K

18

11BMC49SATHYA NARAYANANV

Review of underwateracoustic measurement

Review of chemicalcompositionmeasurement11BMC50 SELVAKUMAR S

11BMC51 SIVAPRAKASH R

19

11BMC52 SUVETHA S Review Acousticsensors

Review of torquemeasurement11BMC53 VIGNESHWARI R

11BMC54 VINOD KUMAR L

20

11BMC55 YOGESHWARAN C Review of Non- contacttype vibrationmeasurement

Review of pressuremeasurement11BMC61 GOKUL VIGNESH A M

11BMC63 MURUGALAKSHMANANB

21

11BMC64 SANTHOSH G Review of very nearfield acoustics

Review of touchscreen sensors11BMC65 SRIVARTHAN R

11BMC66 SIVA KUMAR R

22

11BMC67 RAJENDRA BABU S Review of Carbonnano particle in gasdetection sensors.

Review of gas sensors11BMC68 RANGA KOWSIGAN S11BMC69 KALAIKOVAN K

23

11BMC70 KABILAN S Review filteringtechnique for onboarddata acquisition tostudy the vehiclesuspension

Review of nuclearradiation sensors11BMC71 SATHISH M

11BMC72GANESH PRABHU M

24

11BMC73 SATHISH KUMAR L Review of onboardwireless datatransmission systems

Review of Humiditymeasurement11BMC74 ARAVINTH S

11BMC75 KARTHICK V


3/5

- 3 -

25

11BMC76 DINES BABU K Review the applicationof sound intensitymeasurement

Review of ultrasonicsensors andmeasurement

11BMC77 GANESH S

Instructions to students: 1. A clear statement should be provided for individuals contribution in their

assignments.2. The number of pages should be between 20- 25.

3.

The assignment should have proper referencing as per IEEE standard. DownloadIEEE style manual from the following websitehttp://www.ieee.org/publications_standards/publications/authors/authors_journals.html

4. Use Zotero for reference library and use this extension for citing your reference inthe assignments.

5. The document will be checked for plagiarism using an online tool available forfree in the following website http://smallseotools.com/plagiarism-checker/

6. The power point should not exceed 20 slides and it should be presented not lessthan 15 minutes.

7. The plagiarism also applies for power point.

8.

The document should be numbered with Batch Number.Important datesLast date for submission of assignments: March 18 th 4.00 PM sharp.Only electronic format is accepted and it should reach the followingemail [email protected]

Seminar presentation days: 24 th, 25 th and 28 th March.

Assignments marks will not be given, if assignments submitted on laterdates and failed to present a seminar.

Results will be displayed in the notice board and also sent to your groupemail on or before 28 th March. Appeal/challenge can be made before 29 th March.

The assignment will not be accepted, if the document is not named with batch number.

Canvassing in any form is not permitted.

General instructions about plagiarism :(Ref: http://www.netugc.com/plagiarism )

Plagiarism: Plagiarism is the use or close imitation of the language and ideas of anotherauthor and representation of them as one's own original work. The intentional plagiarismrefers to us ing someones ideas or results without citing the source, using someones
http://www.ieee.org/publications_standards/publications/authors/authors_journals.htmlhttp://www.ieee.org/publications_standards/publications/authors/authors_journals.htmlhttp://www.ieee.org/publications_standards/publications/authors/authors_journals.htmlhttp://smallseotools.com/plagiarism-checker/http://smallseotools.com/plagiarism-checker/http://smallseotools.com/plagiarism-checker/http://www.netugc.com/plagiarismhttp://www.netugc.com/plagiarismhttp://www.netugc.com/plagiarismhttp://smallseotools.com/plagiarism-checker/http://www.ieee.org/publications_standards/publications/authors/authors_journals.htmlhttp://www.ieee.org/publications_standards/publications/authors/authors_journals.html


4/5

- 4 -

ideas or results without using quotation marks, even though he/she cites the sourceand using someones ideas or results without crediting the source. Theaccidental plagiarism is when the author does not know what is considered as plagiarismand he/she cant think of a better way to say it and so copy sentences, phrases, or evensentence structure from the original without using quotation marks and in the event while

preparing the notes he/she does not put exact wording in quotation marks and so he/she plagiarizes without realizing it.a) Why Plagiarism should be Avoided: Plagiarism intentional or accidental isconsidered academic misconduct. Plagiarized work can result in a failing course grade,expulsion, rejection of a paper submitted for publication, denial of an advanced degree, orloss of job. Every year thousands of research scholars and students are expelled forcommitting plagiarism.

b) How Plagiarism can be avoided: The plagiarism in best can be avoided by adoptingthe following measure

-i) As you take notes, put quotation marks around any wording that you copy directlyfrom the source so that later you can put it into your own words and wont accidentally

plagiarize.

ii) If you copy something word for word, put quotation marks around it and cite it, if youcannot remember the source, you dont have the right to use that information.

iii) If you paraphrase by putting ideas into your own words, cite the source of the ideas.

iv) Put the complete bibliographic reference for all citations in the Bibliography (orWorks Cited).

v) Use plagiarism detection software on your own text and make necessary correction.

vi) Use some content composing software like Content Composer

(http://www.contentcomposer.com/ ) that will help in creating plagiarize-proof content.

Marking for assignments

S.No. % of plagiarism and referencing Marks forassignments

1. Greater than 30% and failed to submit theassignment

No marks

2. 30< 25, with reasonable referencing 1 mark3. 25


5/5

- 5 -

SSP Assignment_ 2011 Batch_3

Documents

Transcript of SSP Assignment_ 2011 Batch_3