SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent...
Transcript of SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent...
![Page 1: SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic](https://reader033.fdocuments.in/reader033/viewer/2022060409/5f1035f37e708231d447fd0a/html5/thumbnails/1.jpg)
Head Office: Phone: +1 (844) LIFT-SSI (543-8774) | Fax: +1 (403) 253-4448 | 3220 118 Avenue SE, Calgary, AB T2Z 3X1 | [email protected]
Regional Offices Canada: Edmonton, Grande Prairie, Fort McMurray, Red Deer, Saskatoon, Swift Current
© 2015 SSi Artificial Lift Rod Pumping System is a Registered Trademark of Tundra Process Solutions Ltd.
» Manufacturer of world-class and industry-leading products
» Operating temperatures from -45 to 80°C (-49 to 149°F)
» Installation, start-up and commissioning services
Service Solutions
believes that service isn’t just another thing. IT’S EVERYTHING. The SSi service department provides:
»
Well Optimization Services»
Same-day response»
Certified factory trained technicians available on-call 24/7
» Emergency shipments available 24/7
» Trouble-shooting and diagnostic equipment and methods
» Comprehensive safety program (C.O.R. Certified)
WHY DO SO MANY CHOOSE ?
Regional Offices USA: Colorado, Oklahoma, Houston
Regional Offices South America: Bogota, Colombia
» Micro turbine options for gas casing» GenSet compatible» Chemical injection options
Rod Pumping System
The Evolution of Rod Pumping
» SCADA ready» Certified factory trained technicians
» Long-term and short-term maintenance agreements
Printed in Canada 08201531
![Page 2: SSI Artificial Lift - believes that service isn’t just …...The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic](https://reader033.fdocuments.in/reader033/viewer/2022060409/5f1035f37e708231d447fd0a/html5/thumbnails/2.jpg)
Artificial Lift
The SSi Artificial Lift Intelligent Rod Pumping System uses patented logic, variable frequency drive (VFD) control, hydraulic system and intelligentmonitoring to improve well production. The system offers a much lower total cost of installation when compared to other forms of artificial lift.
Well Design
Transportation & Installation
Operation & Production
- Ease of workover (15 minutes or less)
- PLC controlled monitoring of all functions & alarms
- Integrated dual-stage pump off controller
- Well optimization in minutes with PLC produced surface dynacard
- Lower per-barrel cost
- Run times greater than 99%
- High turndown ratio for high decline wells
- 30-70% energy efficiency
- Autostroke PLC logic - Patent Pending
HSE
Stroke Length
152.2
MODEL 250 Model Strokes Per Minute Horsepower Lifting Capacity
250-15-240 240"25,000 lbs
252.8250-25-240 240"25,000 lbs
4.4 40250-40-240 240"25,000 lbs
250-60-240 5.3
250-75-240
60
6.0 75
25,000 lbs 240"
25,000 lbs 240"
Stroke Length
1807.0
MODEL 350 Model Strokes Per Minute Horsepower Lifting Capacity
350-150-372 372"35,000 lbs
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
2.1 100800-100-360 80,000 lbs 360"
2.8 125800-125-360 80,000 lbs 360"
3.0 150800-150-360 80,000 lbs 360"
MODEL 800
Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
1.7 40400-40-288 336"40,000 lbs
2.0 60400-60-288 336"40,000 lbs
3.4 75400-75-288 336"40,000 lbs
400-100-288 3.7
400-125-288 5.1
100
125
40,000 lbs 336"
40,000 lbs 336"
MODEL 400 LS
MODEL 600 Model Strokes Per Minute Horsepower Lifting Capacity Stroke Length
601.7600-60-336 336"60,000 lbs
2.0 75600-75-336 336"60,000 lbs
2.3 100600-100-336 336"60,000 lbs
3.2 125600-125-336 336"60,000 lbs
- Fewer well interventions due to reduced tubing and sucker rod wear and BHP failure
- 90% downhole pump efficiency or greater- Stroke lengths up to 372 inches
- Lift capacity up to 80,000 lbs- Small footprint and well spacing
- 15 foot for Model 250, 350 & 400 - 20 foot for Model
600 & 800
- Systems can be installed and running within 4 hours- Requires only 1 truck with picker for installation- Modular 2-component design (pump & power unit)- Certified factory trained service and installation and on-site comprehensive operator training available
Planned PreventativeMaintenance
- Rapid response to customer support requirements by SSi’s team of
experienced technicians- PM conducted every 180 days
Unit Selection for Well Optimization
- Design collaboration- Final selection of model
Model 250 Model 350
Model 400 Model 600
Model 800- Final selection of HP
15, 25, 40, 60, 75, 100, 125, or 150 HP
- Improved safety and environmental impact - Inherently safe design with no large
rotating counterweight and quieter operation