SS354 BAe Hawk S.A. - EduardBAe Hawk S.A. SYMETRICAL ASSEMBLY SYMETRICKÁ MON T Á Z´ ´ REMOVE...
Transcript of SS354 BAe Hawk S.A. - EduardBAe Hawk S.A. SYMETRICAL ASSEMBLY SYMETRICKÁ MON T Á Z´ ´ REMOVE...
-
SS354
SS354 1/72 scale detail set for Airfix kit •sada detailù pro model Airfix 1/72
BAe Hawk S.A.
SYMETRICAL ASSEMBLYSYMETRICKÁ MONTÁZ ´ ́
REMOVEODSTRANIT
OPTIONVOLBA?
REPLACENAHRADIT
BENDOHNOUT
GRINDOBROUSIT
1/3
ORIGINAL KIT PARTSPÙVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTSLEPTANÉ DÍLY
PARTS TO BE REMOVEDDÍLY K ODSTRANÌNÍ
FILLTMELIT
eduard
SEAT2 sets
7A, 8A9
24
22
21
34
36
10
11
13
12
26
2725
8
10A
16
17
20
15
14
1mm
20
7A, 8A
10A
10A
3FCorrect position!
FilmSS 354 + 73 354
BAe Hawk
-
Made in Czech RepublicEduard M.A. © 2010 www.eduard.com
SS3542/3
1E 2E
12A
11A
4
3
2
1
5
33
2E
6B
31
29
28
40
7
186
Film
31
30
39
19
13A
Fuselage
1H
4H, 6H
23
35
32
25A
35
2 pcs
232 pcs
38 37
1B, 1F 1B, 2F
Fuselage
41
-
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part.
2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted.
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.
SS3543/3
PARTS WITH GLUE . DÍLY OPATØENÉ LEPIDLEM
Stránka 1Stránka 2Stránka 3