SRX-Pro ServerVMS Software Review

VMS Software Reviews

• Installing new analog cameras onto the system• Installing new IP cameras onto the system• Set cameras’ frame rate, resolution, and types

of recordings (motion, sensor, continuous, and VAR)

• Configuring cameras for Intelli-Zone, Intelli-Guard, and Video Analytics features

• Applying cameras’ features and function• Administrating SRX-Pro

SRX-Pro Server, Hardware Setup

Hardware

• Where do I enter the PTZ ID?

• What is “A/P”?

• How many control inputs and outputs I can have on an IP system?

• What is “Linked Channel” and “Linked Control”?

• What is “Spot monitor(s) follow main screen”?

SRX-Pro Server, Recording/Display Setup

Recording and Displaying Setup

• What are the type of resolutions are available for analog cameras?

• As I increase the frame rate, will I loose my resolution?

• What are the file sizes for different frame rates and resolutions?

• How can I use this to calculate my hard drive storage requirements?

SRX-Pro Server, Motion Setup

Motion Setup

• What is the significance of “Enable Full Screen” feature?

• What happens if the motion area is clear?

• What is the purpose of the “Dwell” time?

• How many motion areas can I draw for one camera?

SRX-Pro Server, Schedule Setup

Schedule Setup

• What are the 4 types of available schedule setup?

• How many channels of VAR can I have on a basic unit?

• What is the maximum number of VAR channels I can have?

SRX-Pro Server, User Management Setup

User Management Setup

• How can I hide a camera from a user?

• How can I disable a setup menu?

• What administrative rights should I provide to my end-user?

• How many user accounts can I create?

SRX-Pro Server, Server Info

Server Info

• Can I change the IP address for the DVMS Server from this setup tab?

• What is the difference between SRX-Pro Sever IP address and public IP address?

• What steps do I need to follow to connect to SRX-Pro Server using a public IP address or dynamic IP address?

• Can Server ID be something other than a number?

• Why do I need to have Server ID?

SRX-Pro Server, System Setup

System Setup

• Why do I need to reboot my SRX-Pro Server?

• What types of the reboot are available?

• What is “NTP Server List”?

• What is “Activate Sensor Backup” feature used for?

• When would I use Server Settings Export and Import?

SRX-Pro Server, IntelliGuard Setup

IntelliGuard Setup

• What is the purpose of IntelliGuard?

• What application is it best to be used for?

• How do I activate sound?

• Where do I record sound?

SRX-Pro Server, Communication Setup

Communication Setup

• What are the important ports that need to be configured?

• What is the “CMS Settings” section for?

SRX-Pro Server, Text Overlay Setup

Text Overlay Setup

• What is text overlay?

• How many text overlay areas (boxes) can I draw?

• Can I have two cash registers on two same cameras?

• What is “Intelligent Text Overlay”?

SRX-Pro Server, IntelliZone Setup

IntelliZone

• What type of application would I use IntelliZone?

• For IntelliZone to work properly, what type of cameras do I need?

• Where do I set preset for my PTZ?

SRX-Pro Server, VideoLogix Setup

VideoLogix Setup

• VideoLogix provides the following:– Enters Area, Crossed Line, Idles in Area, Missing

from Area, Moves in Direction type alarm• VisionCount

– DriveThrough, Register, Region and DoorCount• For Instruction on configuring VideoLogix please

refer SRX-Pro Manual “SRX-Pro Server and Remote User Manual, v.2.3.pdf” VideoLogix - pages 106-115/VisionCount - pages 116-118

• Maximum number of Video Analytics channels supported by the SRX-Pro Server is 16

SRX-Pro Server, VisionCount Setup

SRX-Pro Server, IP Camera Setup

IP camera setup

• GiPi – what is it?

• Annexxus Finder – what is it for?

• Same IP Address range – why do I need it?

• What steps I need to follow to configure an IP camera?

IP Camera Setup

• GiPi: Generic IP Interface– Interface between different IP cameras and

SRX-Pro software, iDisplay, and Video Pilot– Each IP camera has its own way of

communication and GiPi allows the communication between the camera and i3 software

– Please refer to “Master Integration List for IP Cameras and Encoders” for a complete list of GiPi-integrated IP cameras

Annexxus Finder

• A software application that allows the technician to find all of i³ IP camera and UIO8 on a network

• Annexxus Finder will also display a limited number of IP cameras from other manufacturers from the GiPi integration list

• Please follow the instruction on “Annexxus_Finder_v.3.0.pdf”

Same IP Address range – why do I need it?

• Changing IP address on the Annexxus Camera needs to have the same range

• The SRX-Pro needs to have same range to communicate

• You can add a second IP address to your network card to make configuring your IP Cameras a little easier under “Advanced TCP/IP setting”

Adding IP address on SRX-Pro Software

• For instruction on changing / setting the IP address for an IP camera, please refer to the Annexxus Finder Manual, “Annexxus_Finder_v.3.0.pdf”