CITIZENSHIP in SRSD A Celebration of Community Spirit! June 25, 2013.
SRSD 2093: Engineering Mechanics€¦ · SRSD 2093: Engineering Mechanics 2SRRI SECTION 19 ROOM 7,...
Transcript of SRSD 2093: Engineering Mechanics€¦ · SRSD 2093: Engineering Mechanics 2SRRI SECTION 19 ROOM 7,...
SRSD 2093: Engineering Mechanics
2SRRI SECTION 19ROOM 7, LEVEL 14, MENARA RAZAK
MECHANICAL PROPERTIES OF MATERIALSToday’s Objectives:Students will be able to:a) Understand how to measure the stress and strain through
experimentsb) Correlate the behavior of some engineering materials to the stress-
strain diagram.
PLAN OF THE LECTURE
In-Class Activities:• Stress-Strain diagram• Hooke’s Law• Axial Deformations
TENSION AND COMPRESSION TEST
APPLICATIONS
APPLICATIONS
STRESS-STRAIN DIAGRAM
STRESS-STRAIN DIAGRAM
Performing Tension or Compression Test
STRESS-STRAIN DIAGRAM
STRESS-STRAIN DIAGRAM
STRESS-STRAIN DIAGRAM
HOOKE’S LAWS
ELASTIC DEFORMATION OF AN AXIALLY LOADED MEMBER
EXAMPLE 1
EXAMPLE 1: SOLUTION
EXAMPLE 1: SOLUTION
The assembly shown in Fig. 4–7a consists of an aluminum tube AB having a cross-sectional area of 400 mm2. A steel rod having a diameter of 10 mm is attached to a rigid collar and passes through the tube. If a tensile load of 80 kN is applied to the rod, determine the displacement of the end C of the rod. Take Est = 200 GPa, Eal = 70 GPa.
EXAMPLE 2
• Find the displacement of end C with respect to end B.
• Displacement of end B with respect to the fixed end A,
• Since both displacements are to the right,
m 001143.0001143.0107010400
4.0108096
3
AE
PLB
m 003056.010200005.0
6.010809
3
/
AE
PLBC
mm 20.4m 0042.0/ BCCC
EXAMPLE 2: SOLUTION
The End