Sr. MECHANICAL/QA/QC/ ENGINEER

Name TANWEER ALAM

Address Saudi Arabia/RIYADH Contact Number +966540967825E-mail imtanweer@hotmail.com Date of Birth February 02, 1986 Career BE Mechanical Engineer

010 Years Experience Business Sector Petrochemicals/ Building/Infrastructure/Construction

Career Summery Sr. Mechanical QC Engineer for Underground Utilities Piping,Plumbing, Fire Fighting and RTR for MAADEN. JUBAIL, KSA JPP Approved Mechanical QC Engineer for 3.5m Dia FRP Pipelines Project Package 8,DAMMAM KSA Marafiq Approved Mechanical QC Engineer Piping, Coating, Tanks & Steel Structure for JUBAIL2 Power & Water Project. The Royal Commission Approved Project Engineer HVAC, Fire Fighting and Plumbing for Sports Centers Project Jubail, KSA SKS Company Approved Mechanical Project Engineer for Piping, Welding, Inspector for GRE and GRP Pipelines. Member of Indian Engineering Council as Professional Mechanical Engineer.

Current EmployerProject Position Dates

Job Descriptions

Responsibilities

Previous employerProject Position Dates

Job Descriptions

Responsibilities

Previous employerProject

Total Experience 10years (Approx) in KSA

FLUOR CORPORATION SAUDI ARABIA. MAADEN PROJECT,JUBAIL(Villa) Sr.Mechanical Engineer. June 21st, 2012 Till Date.

As a Sr Mechanical QC Engineer responsible for site Installations, inspections and coordination of engineering design discipline activities, planning and coordinating engineering activities, interface activities with procurement, construction, pre-com and commissioning for project within the budgeted cost and quality standards.

Responsible for the installation and Inspection of Piping, Equipments, Pumps. Responsible for Process Water Pipelines, Chilled water, Potable Water, Fire Water Piping. Conduct all inspections i-e Installation, Joints, Slope, Flow test, Coordinates and elevations. Conduct all inspection for Equipment and Pipes. Hydro Testing, Welding, Gap Inspections, Leak Tests, Deflection, Lamination Inspection. Provide all technical and managerial support for the proper execution. Communicate with Supplier for the required material and technical support. Coordinate with the execution team for site supervision Conduct all mechanical tests according to the guidelines of Aramco project specifications. Record all documents, work hard to close all RFIs and NCRs.

KCC & HYUNDAI ENGINEERING &CONSTRUCTION. Villa project Jubail Sr.Mechanical QA/QC Engineer June 05 2010 to May 30, 2012.

As a Mechanical Engineer RTR Pipelines responsible for site inspections,Plumbing, coordination of engineering activities Installation, planning and coordinating, interface activities with procurement, construction, pre-com and commissioning of project within the budgeted cost and quality standards.

Conduct all inspection for FRP Pipes Dia 3500mm. Gap Inspections, Leak Tests, Deflection, Lamination Inspection. Responsible for the installation of FRP pipeline project. Provide all technical and managerial support for the proper execution. Required material and technical support. Coordinate with the execution team for site supervision Conduct all mechanical tests according to Aramco project specifications. Record all documents, work hard to close all RFIs and NCRs.

Building Construction Company Ltd.(ENERGY COMPANY)MODA for Jubail

CV Engr. Fluor

Position Dates

Job Descriptions

Responsibilities

Previous employerProject Position Dates

Job Descriptions

Responsibilities

Mechanical Project Engineer JULY 2007 to May 15 2010.

As Mechanical QC Engineer responsible of preparing job execution plans, technical specifications, data sheets, Inspections, vendor technical evaluation reports, check, review and clarify vendor’s bids and P&ID. Also responsible for controlling quality, cost, engineering schedule and work hours, and coordinating with other engineering disciplines and subcontractors.

Worked on the construction of 20” Dia and 24” Dia Fuel oil pipeline projects. Design review according to project specification and Aramco Standards. Material availability, monitor painting and coating works supervise site works and monitor progress. Worked on the construction of utilities piping consisted of cooling water lines, steam lines both above ground

and underground according to the applications of the international codes and standards API 570. Worked on the construction of large diameter Heavy fuel oil and Light crude oil storage tanks field erected

according to the applications of API 650. Worked on the construction of Process water and Potable water storage low pressure steel tanks. During the execution of the above mentioned projects I have practiced extensive implementation of welding and

Fabrication Procedures as per ASME Boiler and Pressure Vessel Codes, EGW, SMAW, SAW, GTAW, FCAW. Responsible of project execution plans, material approvals, technical specifications, data sheets, equipment

ratings and evaluations, purchase requisitions and all technical correspondence with suppliers. Also responsible for controlling quality, cost, engineering schedule and work hours, testing documentation and record, coordinating with other engineering departments, engineering subcontractors and vendors, client representatives, attend progress meetings, investigating problems, discussions.

Worked for HVAC and Mechanical Systems as a project engineer and completely handled the project responsibilities including approvals for material from the client, procurement, installation, testing and record as per the Royal Commission specifications.

Communicate with the supplier for selection of proper equipment and material. Preparation of material schedules, ratings and evaluations. Raise technical queries to accommodate any change in the design or site constraint. Prepare shop drawings to show the detailed outline of any change or modification. Prepare method statements to explain the sequence of activities and job execution. Maintain close coordination with the workshop to fabricate the duct and fittings according to the drawings and

recommended standards. Supervise the installation at site. Continuous follow up and get feedback to monitor the activities and meet the schedule.

SKS Company Limited. Construction of Fertilizer Complex in NEW DELHI

Mechanical Project Engineer January01, 2006 to June 30, 2007

Project administration, job planning, workforce handling and progress monitoring, Daily, weekly and monthly progress meetings with contractors, project briefing/presentation and coordination with consultants, Preparation of WPS, PQR, WQT, arrangement of site camp and fabrication yard, trench excavation, pre-casted marking posts installation, sand blasting, coating/ tape wrapping. Conduct the flushing, pneumatic and hydrostatic testing of utility pipelines, i.e. NG, process air, cooling water and fuel lines.

Worked on the construction of 20” Dia, 45 km long cross country Natural Gas pipeline project. Contractor SNGPL. Design code of the project was ASME B31.8 for gas transmission and distribution.

Worked on the construction of 12000 m3, 4000 m3 and 6000 m3water storage tanks. Communicate with the supplier for selection of proper equipment and material. Preparation of material schedules, ratings and evaluations. Raise technical queries to accommodate any change in the design or site constraint. Prepare shop drawings to show the detailed outline of any change or modification. Prepare method statements to explain the sequence of activities and job execution. Maintain close coordination with the workshop to fabricate the duct and fittings according to the drawings and

recommended standards. Supervise the installation at site. Continuous follow up and get feedback to monitor the activities and meet the schedule. The design code of all the above tanks was API 620 and API 650 for large diameter field erected low pressure

steel tanks.

Language Skills Understanding Speaking WritingEnglish High High GoodUrdu High High High

CV Engr. Fluor

Managerial / Organisational skills

Planning/Organizing: During my work experience and daily practice to plan, organize, and implement projects and tasks within an allotted timeframe. Results-driven achiever with exemplary planning and organizational skills, along with a high degree of detail orientation.

Problem-Solving/Reasoning/Creativity: Innovative problem-solver who can generate workable solutions and resolve complaints. Not only from personal experience but learning from others knowledge I have got the ability to find solutions to problems using creativity and reasoning along with the available information and resources.

Leadership/Management Skills: Goal-driven leader who maintains a productive climate and confidently motivates, mobilizes, and coaches employees to meet high performance standards.

Social skills Communication Skills: Throughout my academic and professional career I have developed strong communication skills. Exceptional listener and communicator who effectively conveys information verbally and in writing

Technical skills Implementation of industrial codes and standards: While executing the projects I effectively utilise the internationally recognized industrial codes and standards for metal fabrication, welding, construction, documentation, testing and record.

Education:Bachelor of Technology in Mechanical Engineering RGPV University, BHOPAL (M.P), India)

Master in Business Administration (MBA) in Marketing +H.R

Diploma in pipe designing of PDS & SPRPrimavera P6 (Diploma)AUTOCAD2007 Planning Software & Operating System: Windows 2000,

Windows XP, MS Dos, Office, Outlook.

Personal Profile:Nationality : Indian Date of birth : 2nd Feb 1986Status : MarriedExpiry date- : April 2019(passport) Languages Acquainted : English, Urdu , & Hindi

Reference: 1.Androus tsotetsi (engineer manager) Email id: pakiso.tsotetsi68@gmail.com 2.chife scott Email id:chife.scott@fluor.com(supritendent ) 3. soang(QA/QC Manager)

CV Engr. Fluor