Src22134 Owners Manual

SYLVANIA

COLOR TV/VCR

SRC22134 (13 inch)

SRC22194 (19inch)

_c_ I f_/_L N II J

This Owner's Manual is made of

recycled paper. I INSTRUCCIONES EN ESPAI_IOL INCLUIDAS. I

determined that this productmeetsthe ENERGYSTAR® guidelinesforenergy efficiency. ENERGYSTAR® isa U.S. registered mark

Downloaded from www.Manualslib.com manuals search engine

http://www.manualslib.com/

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCETO RAIN OR MOISTURE.

A ACAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSON-NEL.

The caution marking is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT DAN-GEROUS VOLTAGE CONSTITUTING ARISK OF ELECTRIC SHOCK IS PRESENTWITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THEREARE IMPORTANT OPERATING ANDMAINTENANCE INSTRUCTIONS IN THELITERATURE ACCOMPANYING THEAPPLIANCE.

IMPORTANT SAFEGUARDS

1.Read instructions.All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructionsshould be followed.

5.Cleaning-Unping TVNCR from the wail outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the possi-

bility of the loss of an authorization code for a CATV con-

verter, is not intended to be unplugged by the user for clean-

ing or any other purpose, may exclude the reference to

unplugging the appliance in the cleaning description other-wise required in item 5.

6.Attachments.Do not use attachments not reconm_nded by

the TV/VCR manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TVNCR near water-

for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool,and the like.

&Accessories.Do not place this TVNCR on an unstable cart,

stand, tripod, bracket, or table. The TV/VCR may fail, caus-

ing serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or

table recommended by the manufacturer, or sold with the

TVNCR. Any mounting of the

appliance should follow the manu- PoRrAaLE_CAnrW_NINO

facturer's instructions and shoulduse a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the

appliance and cart combination Iooverturn.

AMEUBLES- Cet appareil ne doit _tre _,_,_s._,_,_

plac_ que sur un meuble (avec ou sansroulettes) recommand6 par le fubricant.Si vous l'instailez sur un meuble

roulettes, d(Splacez les deux ensembles

avec pr(Scaution. Un art& brusque, l'u-

tilisation d'une force excessive et des surfaces irr6guli_res

risquent de d6stabiliser l'ensemble et de le renverser.

9. Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the TV/VCR and to protect it from overheat-

ing, and these openings must not be blocked or covered.

The openings should never be blocked by placing the

TVNCR on a bed, sofa, rug, or other similar surface. This

TVNCR should never be placed near or over a radiator or

heat register. This TVNCR should not be placed in a built-

in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's instructionshave been adhered to.

10.Power Sources-Thls TVNCR should be operated onlyfrom the type of power source indicated on the marking

label. If you are not sure of the type of power supply toyour home, consult your appliance dealer or local powercompany. For TVNCRs intended to operate from battery

power, or other sources, refer to the operating instructions.

ILGrounding or Polarization.This TV/VCR is equipped

with a polarized aiternating-current line plug(a plug havingone blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If youaxe unable to insert the plug fully into the outlet, try revers-ing the plug. If the plug should still fall to fit, contact yourelectrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

12.Power-Cord Protection-Power-supply cords should be

muted so that they are not likely to be walked on orpinched by items placed upon or against them, paying par-ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

- 2 - EN9103



F;QURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND

CLAMP

ELECTR¢CSERVtCE

NEC. NATIONALELECTRICALCODE

$2898A

• GROUNDING CONDUCTORS

{NECSECTION$_0.21)

GELECTROOESYSTEM

(NEC ART 250, PART H)

13.Outdoor Antenna grounding-If an outside antenna orcable system is connected to the TV/VCR, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up staticcharges. Article 810 of the National Electrical Code,ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,grounding of the lead-in wire to an antenna discharge unit.

size of grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirementsfor the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/VCR receiverduring a lightning storm, or when it is left unattended andunused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This willprevent damage to the TV/VCR due to lighming andpower-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or otherelectric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be rMcenU3keep fromtouching such power lines or circuits as contact with them

might be fatal.

16.Overlonding-Do not overload wall outlets and extensioncords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry.Never push objects of any kind

into this TV/VCR through openings as they may touch dan-gerous voltage points or short out parts that could result in

a fire or electric shock. Never spill liquid of any kind onthe TV/VCR.

18.Servicing.Do not attempt to service this TV/VCR yourself

as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to quali-

fied service personnel.

19.Damage Requiring Service.Unplug this TWVCR fromthe wall outlet and refer servicing to qualified service per-sonnel under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into theTV/VCR.

c. If the TV/VCR has been exposed to rain or water,

d. If the TV]VCR does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restorethe TVNCR to its normal operation.

e. If the TV/VCR has been dropped or damaged in any way.

f. When the TV/VCR exhibits a distinct change in perfor-mance-this indicates a need for service.

20.Replacement Parts.When replacement parts are required,be sure the service technician has used replacement partsspecified by the manufacturer that have the same character-istics as the original part. Unauthorized substitutions mayresult in fire, electric shock, injury to persons or other haz-ards.

21.Safety Check.Upon completion of any service or repairs tothis TVNCR, ask the service technician to perform routine

safety checks to determine that the TV/VCR is in properoperating condition,

22.Heat-This TV/VCR product should be situated away from

heat sources such as radiators, heat registers, stoves, orother products (including amplifiers) that produce heat.

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUGTO WIDE SLOT, FULLYINSERT.

ATTENTION: POUR #VITER LES CHOC I_LECTRIQUES, INTRODUlRE LA LAME LA PLUS LARGE DELA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

- 3 - EN9103



PRECAUTIONS

For safe operation and satisfactory performance ofyour TV/VCR, keep the following in mind whenselecting a place for its installation:• Shield it from direct sunlight and keep it away

from sources of intense heat.

• Avoid dusty or humid places.• Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holesat the top and bottom of the unit. DQnot place theunit on a carpet because this will block the ventila-tion holes.

• Install unit in a horizontal position.• Avoid locations subject to strong vibration.

• Do not place the TV/VCR near strong magnetic fields.• Avoid moving TV/VCR to locations where temper-

ature differences are extreme.

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnectingit from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplugthe power cord immediately and take the unit to anAuthorized Service Center for servicing.

• Do not put your fingers or objects into theTV]VCR cassette holder.

• Do not place anything directly on top of the unit.

Moisture condensation may occur inside the unitwhen it is moved from a cold place to a warm place,or after heating a cold room or under conditions ofhigh humidity. If a tape is played in a TV/VCRwhich has moisture, it may damage the tape andTV/VCR. Therefore if condensation occurs inside theunit, turn the POWER button on and allow at least 2hours for the unit to dry out.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast televi-

sion programming, video tape, film or other copy-righted material may violate applicable copyrightlaws. We assume no responsibility for the unautho-

rized duplication, use, or other acts which infringeupon the rights of copyright owners.

FCC WARNING- This equipment may gener-ate or use radio frequency energy. Changes ormodifications to this equipment may causeharmful interference unless the modificationsare expressly approved in the instruction man-hal. The user could lose the authority to oper-ate this equipment if an unauthorized changeor modification is made.

This equipment has been tested and found to com-ply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.

This equipment generates, uses, and can radiateradio frequency energy and, if not installed andused in accordance with the instructions, may causeharmful interference to radio communications.

However, there is no guarantee that imJerferencewill not occur in a particular installation. If thisequipment does cause harmful interference toradio or television reception, which can be deter-mined by turning the equipment off and on, theuser is encouraged to try to correct the interfer-ence by one or more of the following measures:1) Reorient or relocate the receiving antenna.2) Increase the separation between the equipment

and receiver.

3) Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is con-nected.

4) Consult the dealer or an experienced radio/TVtechnician for help.

The serial number of this product may be found on the back of the unit. No other TV/VCR has the same serialnumber as yours. You should record the number and other vital information here and retain this book as a per-manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.Model No.

Serial No.

- 4 - EN9103



TABLE OF CONTENTS

• IMPORTANT SAFEGUARDS ............. 2

• PRECAUTIONS ........................ 4

• FEATURES ............................ 6

• SUPPLIED ACCESSO_ES ............... 6

• OPERATING CONTROLS AND FUNCTIONS 7

• PREPARATION FOR USE ................ 9

ANTENNA/CABLE CONNECTIONS ....... 9

EXTERNAL INPUT MODE .............. 10

INSTALLING THE BATYERIES ........... I0

• SET UP FOR USE ..................... 10

CHANNEL SET UP FOR THE FIRST TIME .10

CLOCK SET UP (AUTO / MANUAL) ...... 11

CHANNEL SET UP AGAIN .............. 12

DELETING (OR ADDING) CHANNEL ..... 12

SELECTING THE LANGUAGE ........... 13

DAYLIGHT-SAVING TIME .............. 13

• TV OPERATION ....................... 14

WATCHING A TV PROGRAM ............ 14

GAME MODE ......................... 14

DEGAUSSING ........................ 14

PICTURE CONTROL ................... 14

CLOSED CAPTION SYSTEM ............ 15

V-CHIP SET UP ........................ 15

FM MODE (SRC22134 only) .............. 17

• PLAYBACK ........................... 17

NORMAL PLAYBACK .................. 18

AUTO REPEAT PLAYBACK ............. 18

SEARCH ............................. 18

SLOW MOTION ....................... 19

RENTAL PLAYBACK ................... 19

VERTICAL HOLD CONTROL ............ 20

STILL PICTURE ....................... 20

TRACKING ADJUSTMENT .............. 20

• RECORDING ......................... 20

NORMAL RECORDING ................. 20

OTR (One Touch Recording) .............. 21

TIMER RECORDING ................... 21

TIMER PROGRAM EXTENSION ......... 22

HINTS FOR AUTOMATIC TIMERRECORDING ......................... 23

AUTO RETURN ....................... 23

WAKE UP TIMER ...................... 23

SLEEP TIMER ......................... 24

• COPYING A VIDEO TAPE ............... 24

• ON SCREEN DISPLAY ................. 25

• SPECIAL FEATURES .................. 25

REAL TIME TAPE COUNTER ............ 25

AUTO REWIND-EJECT ................. 25

• MMNTENANCE ....................... 25

• TROUBLESHOOTING GUIDE ........... 26

• SPECIFICATIONS ..................... 27

• CABLE CHANNEL DESIGNATIONS ...... 27

• WARRANTY ................... Back Cover

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials inaccordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-tions concerning chemical wastes.

-5- EN9103



FEATURES

• Rotary 4-head Record/Playback System-Fnnrheads ensure excellent picture quality and specialeffects playback.

• Index Search-Fast-forwards to start of next recording.• Slow Motion-View recorded program at slower

than normal speed.• Infrared remote control• Bilingual on screen menu display eelectable in

English or Spanish• Real time counter-This shows the elapsed record-

ing or playback time in hours, minutes, and sec-onds. The "-" indication will appear when the tapeis rewound further than the tape counter position"0:00:00".

• 181 channel capability PLL frequency synthesiz-er tuner with direct station call-(A convertermaybe necessary to view scrambled cable channels.)

• Auto Clock Setting-Allows you to set the clockfrom a PBS broadcast station.

• Closed caption system-You may view speciallylabeled (cc) TV programs, movies, news, prere-corded tapes, etc. with either a dialogue caption ortext display added to the program.

• Game mode-Automatically sets external inputmode and allows the TV/VCR display to be suit-able for use with TV games.

• Auto power on and off system-Automaticallyturns on the TV/VCR when you insert the cassette,turns off after auto-rewind, and ejects when thebeginning of the tape is reached.

• Auto rewind when the end of a tape isreached-This function doesn't occur when usingtimer recording.

• 2 Step picture search operatlon-Ynn can view avideo program at a high speed or super nigh speedin either a forward or reverse direction in LP and

SLP mode. For SP mode only high speed.• Three different playbacktape speeds : SP/LP/SLP• Two different recording tape speeds : SP/SLP

• Auto Head Cleaner-Automatically cleans videoheads as you insert or remove a cassette.

• Zero Return-The tape returns to counter of0:00:00 by rewinding or fast forwarding.

• Still-"Freeze" the picture at any time, for closeviewing of a particular scene. Only tapes recordedin SLP mode will show a fairly clear picture.

• Digital AutoTracktng (DTR)--Automaticallyadjusts the tracking for each tape you play.

• Rental play mode-Improves playback picturequality from worn tapes, such as rental tapes.

• Auto repeat-Allows you to repeat the playing of atape indefinitely without pressing the PLAY button.

• Time search-Lets you set the TV/VCR to advancethe tape by entering the desired playback time youwant to skip.

• OTR (One Touch Recordlng)-lnstant timedrecording from 30 to 480 minutes is possible at thepush of the REC/OTR button.

• 1 Year,8 events (including Daily and WeeklyTimer Recording) The built-in timer allows you torecord up to 8 programs at different times on dif-ferent channels up to 1 year in advance. The Dailytimer allows recordings to be made of daily broad-casts, and the Weekly timer allows recording to bemade once a week up to the end of the tape.

• Auto return-After timer recording is finished, theTV/VCR can return to the beginning of the record-ing.

• Wake-up/Sleep timer-Allows you to have theTV/VCR automatically turn on or off at a desiredtime.

• Timer Program Extension-Allow you to shift thetime schedule for automatic timer recording.

• V-CHIP-Enables parents to prevent their childrenfrom watching inappropriate material on TV.

• FM mode-Allows you to listen to the FM radio._(SRC22134 only)

SUPPLIED ACCESSORIES

Remote Control Unit _ 2 AA Batteries Rod Antenna (13" model only)|

PART NO. I I _ PART NO. (0EMN00673 or ] [NE109UD for SRC22134) _ vz---'_L..---_ 0EMN01599 or 41N0157UD for SRC22194) 0EMN01755) _"<_[

If you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-968-3429.

• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators(Splitter). Contact your local electronics store for these items.

• We do not recommend the use of universal remote controls. Not all of the functions may be controlled witha universal remote control. If you decide to use a universal remote control with this unit, please be awarethat the code number given may not operate this unit. In this case, please call the manufacturer of the uni-versal remote control.

- 6 - EN9103



OPERATING CONTROLS AND FUNCTIONS

his manual covers 13" and 19". The operation of the two models are exactly the same except the_ppearance. 19" model is illustrated in this manual. /-TV/VCR FRONT PANEL -

- REMOTE CONTROL -

1 2 3 4 5 6 78910111213 14

[ SRC22134

3--

15--

16--17--8--

7--

11--18--

19--2O

-C3

Q_3_ 5

_y e_ --4

-21

[ SRC22194 ]

a-- -t_D

"C5_Cg3 C:D CD-

15--

16--17--8--

7--

11--18-

19-2O

T SP_ P_U_SllL

--25

--7

--24

--5

--4

--23--9--10

--22

--21

1 VIDEO input jack- Connect to the video outputjack of your video camera or another VCR.

2 AUDIO Input jack- Connect to the audio outputjack of your audio equipment, video camera oranother VCR.

3 POWER button- Press to turn TV/VCR on and off.Press to activate timer recording.

4 VOLUMEA/V buttons-Adjust the volume level.5 CHANNEL • / • buttons- Pressto select the

desired channels for viewing or recording, listeningof FM radio.

You may display the main menu on the TV screenby pressing repeatedly this button on the TV/VCR.TRACKING function- Pressto minimize video'noise' (lines or dots on screen) during playback orSlow mode. (See page 20.)

6 Remote Sensor Window:--Receives the infraredsignals from the remote control.

[ TVNCR ]

7 STOP button- Pressto stop the tape motion,EJECT button- Pressin the Stop mode to removetape from TV/VCR.• button-

• Press to select setting modes from the on screenmenu.

• Press to enter digits when setting program.(for example: setting clock or timer program)[ Remote control ](SRC22134)TVIFM button- Setsthe F/vl mode.(SRC22194)EJECT button- Pressin the Stopmode to remove tape from TV/VCR.

- 7 - EN9103



- REAR VIEW -*

©

8 REW button- Press to rewind the tape, or to viewthe picture rapidly in reverse during playbackmode. (Rewind Search)

I button-

. Press to select a mode from a particular menu.(for example: LANGUAGE or USER'S SET UP)

9 PLAY button- Press to begin playback.• button-

• Press to select setting modes from the on screenmenu.

• Press to enter digits when setting program.(for example: setting clock or timer program)

10 F.F-WDbutton-- Press to rapidly advance the tape,or to view the picture rapidly in forward duringplayback mode. (Forward Search)I_ button-

• When setting program (for example: setting clockor timer program), press to determine your selec-tion and proceed to the next step yon want to input.

• Press to determine setting modes from on screenmenu.

• Press to select a mode from a particular menu.(for example: LANGUAGE or USER'S SET LIP)

11 REC button- Press for manual recording.

OTR button- Activates One Touch Recording.(only on the TV/VCR)

12 RECORD Indicator- Hashes during recording.Lights up in the Stand-by mode for Tuner Recording.

13 EARPHONE jack- Connects to earphones (notsupplied) for personal listening. The size of jack is1/8" monaural (3.5ram).

14 Cassette compartment15 Number buttons- Pressto select desired channels

for viewing or recording. To select channels from1 to 9, first press the 0 button and then 1 to 9.

4100 button- When selecting cable channels whichare higher than 99, press this button first, then pressthe last two digits. (To select channel 125, first pressthe "+100" button then press "2" and "5").

26 27

16 MENU button- Press to display the main menu onthe TV screen.

17 DISPLAy button- Display the counter or the cur-rent channel number and current time on the TV

screen. (See page 25.)18 SPEED button- Press to choose the desired

recording speed:SP/SLE19 T-PROG. CLEAR button- Press to cancel a setting

of timer program. (See page 23.)COUNTER RESET button- Press to reset counterto 0:00:00.

20 GAME button- Sets the game mode and externalinput mode at the same time. (See page 14.)

21 SLOWbutton- Press to start slow motion playback.The slow speed can be controlled by pressing theEFWD button (faster) or the REW button (slower).(only on the remote control).

22 PAUSE/STILL button- Press to temporarily stopthe tape during the recording or to view a still pic-ture during playback.Frame Advance function- Press to advance the

picture one frame at a time during Still mode.23 MUTE button- Mutes the sound. Press it again to

resume sound.

24 CHANNEL RETURNbutton- Press to go back tothe previously viewed channel. For example,pressing this button once will change channel dis-play from 3 (present channel) to 10 (previouslyviewed channel), and pressing it a second timewill return from 10 to 3.

25 WAKE UP/SLEEP button- Sets the Wake up orSleep Timer. (See page 23 and 24.)

26 Power cord- Connect to a standard AC outlet(120V/60Hz).

27 ANT.terminal- Connect to an antenna or cable

system.

-8- EN9103



PREPARATION FOR USE

From Cable System orSatellite Dish \

Satellite Box or __ _.

Cable Box. _ /

(Not supplied) _

From

Cable System

Rod Antenna

(Supplied with

_VHF/UHF Antenna

13" model only)_l_ (Not supplied)

" } VHF Antenna(Not supplied)

UHF Antenna(Not supplied)

orFlat twin-lead cable

VHF/UHF COMBINED ANTENNA VHF/UHF SEPARATE ANTENNAS

The VHF/UHF Rod Antenna (supplied with 13"model only) is detachable. Insert the stem of theantenna into the hole on the upper-back portion ofthe TV/VCR.Connect the VHF/UHF Rod Antenna orVHF/UHF Combination Antenna to the ANT. termi-nal of the TV/VCR as shown in the diagram. For thebest reception, fully extend the VHF/UI-IF RodAntenna and make the necessary adjustments. (Avoidtouching the top section when adjusting.)NOTE:

Before plugging the Rod antenna into antenna termi-nal, check that the pin is not bent. If it is bent,straighten the pin as illustrated, then plug the pin intoantenna terminal.

Bent pin

(Needs to be straightened)

NOTE:

The connection of an indoor antenna may not alwaysgive acceptable TV reception.

(Straight pin)

In some areas it will be necessary to use an outdoorantenna.

CABLE WITHOUT CONVERTER/

DESCRAMBLER BOX

Use this connection if your cable system connectsdirectly to your TV/VCR without a converter box.

By using this connection you can:1) Use the TV/VCR remote to select channels.

2) Program one or more unscrambled channels forAutomatic Tuner Recording.

NOTE: This unit will ONLY record and view thesame channel.

CABLE WITH CONVERTER/DESCRAMBLER BOX OR SATELLITEBOX

If your cable service supplies you with a converterbox or if you use a satellite system, you can use thebasic connection shown in the diagram.By using this connection you can also record scram-bled channels. However, channel selection must bemade with the converter box or satellite box. This

means that channels cannot be changed using theTV/VCR Remote Control. Unattended timer record-ing is limited to one channel at a time.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 82040 of the NEC thatprovides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connect-ed to the grounding system of the building as close to the point of cable entry as practical.

- 9 - EN9103



TO RECORD A SCRAMBLED/UNSCRAMBLEDCHANNEL

1) Set the TV/VCR channel selector to the outputchannel of the Cable Converter Box or Satellite

Box. (Example: CH3)2) Select the channel to record from your Cable

Converter Box or Satellite Box.

1)Open the battery compartment cover by pressingthe cover on the remote unit in the direction of thealTOW.

2)Insert 2 "AA" penlight batteries into the batterycompartment in the direction indicated by thepolarity (+/-) markings.

3)Replace the cover.

When using an external input signal (another VCR orvideo camera), connect the player's audio/video out-put cables to the AUDIO IN/VIDEO IN jacks ofyour TV/VCR. Then press the CHANNEL h, or •button until "AUX" appears on the screen.NOTE: "AUX" is found below the

(Example:l°westmemorized channel" [ AuX]CH2)

(9

®

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Justselect the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Thenselect the channel to be viewed on the Cable Box or Satellite Box.

1 Plug in the TV/VCR power cordPlug the TV/VCR power cord into astandard AC outlet.

NOTE:If some digits appear in the comer ofthe screen, press the POWER buttonwithout unplugging the power cord.

2 Turn on the TV/VCRPressthe POWER buttonto tramon the TV/VCR

3 Select "ENGLISH" or "ESPANOU'

Select "ENGLISH" or I __o_- ]

"ESPAIqOL"=Spanish using the , _,_EFWD/I_ or REW/<I button. "[ ]" tE,_,_ E_*,_

indicate the selected language. ,_O"_SET

'--n''--set/ ].....Press the PLAY/*, or STOP/• but-ton to point to "AUTO PRESET". _,_,s,,_

Then press the EFWD,._ button. ,. _o_,_The tuner scans and memorizes allactive channels in your area.NOTES:

• The TV/VCR distinguishes between standard TVchannels and cable channels.

• If you want to play or record a video tapeBEFORE presetting the tuner, you must press theMENU button on the remote control. To preset thetuner again, see "CHANNEL SET UP AGAIN" onpage 12.

• The TV/VCR may memorize TV channels asCATV channels if reception conditions are poor. Ifthis happens, try the AUTO MEMO action againwhen reception conditions are better.

5 After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you canselect the desired channel directly with the remotecontrol number buttons or CHANNEL A or •button.

- 10 - EN9103



TO SELECT A DESIRED CHANNEL

You can select the desired channel by using theCHANNEL • or • button or directly pressing thenumber buttons on the remote control.

Note for using the number buttons:• When selecting cable channels which are higher

than 99, press the +100 button first, then, press thelast two digits. (Example: to select channel 125,first press the +100 button then press "2" and "5").

• You must proceed single-digit channel numberswith a zero (Example: 02 ... 09).

1 Select "SETTING CLOCK"Press the MENU button on theremote control.

Press the PLAY/A or STOP/_ but-ton to point to "SETTINGCLOCK".

Then, press the EFWD,_ button.

-MENU-

TIMER PRO_RAMMI_p_TURE CONTP_S_Tr_G C_OCKCIelNI_L SET L,eUSERS S,_T UpV-CHIP _1 Up

LA_U_ NGtlSh3

ZERO A_nM_ S,_CHINO_X S£ARCH

]2 Set "AUTO CLOCK" to [ON]

Press the EFWD/I_ or REW/_Ibutton repeatedly until [ON]appears. _ SFrflNG CLOCK- ]

\ I /

_- ^UTO CLOCK --/O_I\--AUTO CLOC_ _ I_OI

D_T _

Set the clock accurately for proper automatic timerrecording. If the Public Broadcasting Station (PBS)is available in your area, follow "AUTO CLOCKSETTING". If it is not, follow "MANUAL CLOCKSETTING".

A UTO CLOCK SETTING

You can have the TV/VCR set the clock automatical-ly by using the Public Broadcasting Station (PBS)channel in your area. Once you have set the clock byusing the following procedure, the TV/VCR willautomatically monitor the correct time and datebeing broadcast by the PBS station in your area,using a new service called Extended Data Service(XDS).

Make sure ...

• TV/VCR power must be turned on.• Confirm that the antenna connections are correct.

• The cable convener box must be turned on if yourTV/VCR is connected directly to it. (See NOTES:)

• The channel is properly set in advance.

NOTES:

• Auto clock setting only needs to be set once. But itcan be done again if the clock's time has becomeincorrect for some reason.

• If the TV/VCR is connected directly to a cableconvener box or satellite box, the local PBS stationmust be selected on the cable box itself, and the

TV/VCR must be set to the output channel of thecable convener box or satellite box (usually chan-nel 3 or 4), to be able to set up or correct the clockautomatically.

If you do not know what your local PBS station is,then follow "Manual Clock Settings".The TV/VCR cannot control the channels of thecable convener box or satellite box.

3 Enter the channel number for the PBS station

Press the PLAY/• or STOP/_" but-ton to point to "AUTO CLOCKCH'.

Then press the EFWD/I_ orREW/_I button until the channelnumber for your local PBS stationappears.

- _NG CLOCK - l/AUX° ¢_OCK _ .'

MANU_L CLCCK SET

DS T IO_FI

If you do not know the PBS channel number, Leave itset to [AUTO] which is located before [2]. TheTV/VCR will search automatically all available chan-nels for the local PBS station, and will select thatchannel.

4 Exit the Auto Clock Setting

Press the MENU button on the remote control toreturn to TV mode.

5 Turn off theTWVCR

Turn the TV/VCR off. The Auto Clock functionsautomatically while the TV/VCR is off.

If you choose [AUTO],• The TV/VCR must search until the PBS channel is

found. It must scan each channel for a couple ofseconds to determine if that channel is transmittingthe XDS signal.

• If the time that is automatically set by this selectedPBS station is incorrect, it may not be your localPBS station, but one from a different time zone.Or if no channel is broadcasting the XDS signal inyour area, no time will show. In these cases, youmust manually enter the correct local PBS station,or set the clock manually and turn off the AutoClock Setting feature.

MANUAL CLOCK SETTING

Make sure ...

• TV/VCR power must be turned on.

In the example below, the clock is to be set to:DATE May 7th, 2002SETTING TIME 5:40PM

-11- EN9103



1 Select "SETTING CLOCK" I _"°_'_'_u- 1P_TLIRE

Press the MENU button on the /,- _.,_cL_C_".qNEt. _ UP

remote control. Press the PLAY/A / v_.,,s_°Por STOPiV button to point to "SET- / ZE,O_'_,_..TING CLOCK". I _"_INDEX S_:_H

Then, press the EFWD/I_ button.

2 Select "MANUAL CLOCK I ......

SET" / =o,/Press the PLAY/A or STOP/'v but- I,- _oe,_, |ton to point to "MANUAL CLOCK [ *_ _n [SET". "

Then, press the F.FWD/I_- button.

3 Select the monthPress the PLAY/A or STOP/_" but-ton until your desired monthappears. (Example: May ----05)Then, press the F.FWD/II_ button.

- M&NU/tL CLOCK _ -

_js_ --I-I_JR MINffrE

-- : -- -

NOTE:

When unplugging the AC cord or if there is a powerfailure for more than 3 seconds, you may have toreset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock,1)Follow steps [I] and [2].

2)Se!ect where you want to change using theEFWD/I_ or REW'/_I 6utton.

3)Enter correct numbers using the PLAY/& orSTOP/Y button.

4)Press the MENU button on the remote control tostart the clock.

PLEASE NOTE:

If there is no local PBS station in your area or onyour cable system, select "AUTO CLOCK" and pressthe EFWD/_ or REW/II button to tum [OFF] thisfunction. Then you can manually adjust the clock.

4 Select the day [Press the PLAY]& or STOP/_' but- /ton until your desired day appears. /(Example: 7th ----07) /Then, press the EFWD/I_- button. L

M:_NU_ CLOtTK8_X - ]

MO_"4€'_

MIk'trrE

5 Select the year [Press the PLAY/A or STOP/_' but- /ton until your desired year appears. /(Example: 2002) /Then, press the EFWD/I_ button. L

-%1H_IR _ J

6 Select the hourPress the PLAY/& or STOP/V but- |ton until your desired hour appears. /(Example: 5, PM) /Then, press the EFWD/I_ button. L

OAy

u5 t tl? _ 2OO2

7 Select the minute ( -_._c_c__ 7Press the PLAY/A or STOP/_' but- | _ _'* /ton until the desired minute appears./ °' ' °' _ '*"(Example: 40) / _ x,'_Y_

L 0, _,,0,-_ J

8 Start the clock [ '_ /Press the MENU button on the / Jremote control. /Although seconds are not displayed,/they begin counting from 00 whenyou press the MENU button on the remote control.Use this feature to synchronize the clock with thecorrect time.

Make sure ...

• Press the POWER button to turn on the TV/VCR.

- 12-

1 Select"CHANNEL SET UP"Pressthe MENU button on theremote control.

Press the PLAY/A or STOP/_ but-

ton to point to "CHANNEL SETUP".

Then, press the EFWD/_ button.

-MENU- 1

TII4ER PR( I_/_AMMIN3PIC TLIR E (_4_',=TRC_

C_O_K

t_S SET UpV_-_p I_'T Up

ZERO Rrt_E SEarCH_D_X S_RCH

2 Begin auto presetPress the PLAY/A or STOPiV but-ton to point to "AUTO PRESET".Then, press the F.FWD/I_ button.The tuner scans and memorizes all

the active channels in your area.

• _o / _t_rE eH O_

¢0JrO pp£_

3 After scanning

The tuner stops on the lowest memorized channel.

The channels you no longer receive or seldom watchcan be deleted from the memory. (Of course, youcan add the deleted channel into the memory again.)

EN9103



1 Select "CHANNEL SET UP"Press the MENU button on theremote control.

Press the PLAY/• or STOPiV but-ton to point to "CHANNEL SETUP".

Then, press the F.FWD/IIp button.

-MENU- ]

T_MERpROGR_AM,'NG_eTUnE CON71=a_8_VflNG CLOCK_NN£C _ET UPLISEF'S SET UPV_HtP SEt UPL_N_U#,GE NGLtSH]

_RO RETURNrIME S_RGH_t_t)EXSF_RCH

2 Select"ADD/DELETE CH"

Press the PLAY/• or STOP/• but-ton to point to "ADD/DELETECH".

Press the EFWD/_ button.

_ C_t_NNEL SEX Up

_0 I OEt.£T£ CH GV}

At_O PRESET

2 Select "ENGLISH" or "ESPANOI_"

Select "ENGLISH" or "ESPANOL"= Spanish usingthe EFWD,,_ or REW/'ql button.

3 Exit the Language mode

Press the MENU button on the remote control toreturn to TV mode.

NOTE: If for some reason the menu is in Spanish,press the MENU button on the remote control, pressthe PLAY/A button to point to "IDIOMA[ESPAlqOL]", then press the EFWD/I_ button, thenpress the MENU button on the remote control.

3 Enter the desired channel number

Pressthe PLAY/& or STOP/_' but- /ton until your desired channel aum- [ber appears. (You can also use thenumber buttons or the CHANNEL fAir button to enter it.) (Example:CH8)

08

Aoo i DEt_T_

4 Delete (or add) it from (into) memoryPress the EFWD/I_- or REW/_I button. The channelnumber changes to light red. The channel is deletedfrom memory.

• To delete another channel, repeat steps [3] and [4].• If you press the EFWD/I_ or REW/<I button

again, the channel is memorized again.

Added channel: Light blue.Deleted channel: Light red.

5 Exit the channel setup modePress the MENU button on the remote control toreturns to TV mode•

NOTE: To confirm that channel(s) has been deletedor added, press the CHANNEL • or • button.

Make sure ...

• Press the POWER button to turn on the TV/VCR.

NOTE: This function effects only the language onthe screen menu and not the audio source.

1 Select"LANGUAGE"Press the MENU button on theremote control.

.Press the PLAY/• or STOP/_' but-ton to point to "LANGUAGE".

MENU- 1

TIMER pROG P_M I_lP_pJP_ CONTF__S[_I_G C_O2KCHA_a_L SET Upt_aLe_5 S_ UPV_Ip_TtlP I /

ZERO RETOF_

Select this feature and the TV/VCR's clock automati-

cally will advance one hour in April, then reverse one

hour in October.

When Daylight-Saving Time is ON, the clock willchange automatically as follows:

• First Sunday of April : At 2 AM the clock imme-diately changes to 3 AM. Any timer programmingyou have set to occur between 2 AM and 3 AMwill not record.

• Last Sunday of October : At 2 AM the clock

immediately changes to 1 AM.Make sure ...

• Press the POWER button to turn on the TV]VCR.

I Select "SETTING CLOCK"

Press the MENU button on the [ ,=_,_,o_;_,,_ ]remote control. ],. _,_"_,,_'_ /Press the PLAY/• or STOP/• but- / P"=_'_ton to point to "SETTING CLOCK". / ZE,o_Then, press the F.FWD/II_ button. L '_'_

2 Set "D.S.T." (Daylight-SavingTime) to [ON]

ton to point to "D.S.T.". ,_o_o_Then, press the F.FWD/I_- or _ ....REW/_I button until [ON] appears. ,,._o_o_.

3 Exit the Daylight-Saving Time modePress the MENU button on the remote control toreturn to TV mode.

TO CANCEL THE DAYLIGHT-SAVINGTIME

Repeat steps [1] to [2], select [OFF] using theF.FWD/I_ or REW/_I button.Then, press the MENUbutton on the remote control to return to TV mode.

- 13 - EN9103



TV OPERATION

1 Turn on theTV/VCR

Press the POWER button to turn on the TV/VCR.

2 Select the channel number

Press the CHANNEL • or • button to select yourdesired channel number or press the number buttonson the remote control.

Remember: If the TV/VCR is connected to a cablebox or satellite box, the TV/VCR must be on CH3 orCH4, then the channel to be viewed must be selectedon the cable box or satellite box.

3 Adjust sound

Press the VOLUME A or X7buttonto adjust the volume.

vo_t_4EIllllttiattt

The TV/VCR's picture controls - BRIGHT, CON-TRAST, COLOR, TINT and SHARPNESS - arepreset to factory specifications. Although they areusually the best, you may need to make some furtheradjustments for a natural looking image.NOTES:

• Procedures must be followed within 5 seconds orthe Picture Control mode will be cancelled.

• When setting the Picture Control, the Game modewill be cancelled.

Make sure ...

• TVNCR power must be turned on.

1 Select"PICTURE CONTROL"

Press the MENU button on the

remote control.

Press the PLAY/A or STOP/T but-ton to point to "PICTURE CON-TROL".


-MENU- ]

TlUER PROQ#._4_ _

S_TflNO C_C_ KCK_$!EL _¢1 UpU_ER'$ _T UpV_:WdP_ Up

SE_qCHtNOEXSEARCH

This function enables you to decrease the TV screencontrast and making it suitable for use with a TVGAME.

NOTE: This function can not be set during recording.

Press the GAME button on the _ |remote control. "GAME" appears Jon the screen.

When you press the GAME button;

• The TV/VCR comes on automatically if it is off.• The TV/VCR will be in external input mode auto-

matically.

TO CANCEL THE GAME MODE

Press the GAME button or CHANNEL • or • but-ton on the remote control.

Magnetism from nearby appliances might affect thecolor of the TV picture.

If this happens, move this unit away from the appli-ance. If the color is still not correct, disconnectpower cord from AC outlet then reconnect it after 30minutes.

2 Select item you want to adjustPress the PLAY/• or STOP/V button until desiredcontrol is displayed.

BRIGHTCONTRAST

COLORTINT

SHARPNESS

_l_r-DDOODOODOOOOOOO*

3 Adjust the picture control

Press the F.FWD,_ or REW/_I button to adjust toyour desired level.

REW/_I EFWDA_

BRIGHT to decrease to increase

brightness brightnessCONTRAST to decrease to increase

contrast contrast

COLOR to pale to brilliant

TINT to purple to green

SHARPNESS to soft to clear

• If there is a power failure of any kind, the unit willretain its memory for this feature.

- 14 - EN9103



You can view specially labeled (cc) TV programs,movies, news, pre-recorded tapes with either a dia-logue caption or text display.CAPTION mode: By choosing the caption mode, youcan watch dramas, movies and news while captioningthe dialogues and the contents of news.

TEXT mode: By choosing the text mode, you canwatch half screen text information if you want.1-2: You may get these captions or text informationby selecting either "1" or "2". Caption "2" is usuallyused for a second language if available.

NOTE:

Not all programs are broadcast with closed captions.Your television is designed to provide error freeclosed captions from high quality antenna, cable andVCR signals. Conversely, poor quality signals arelikely to result in caption errors or no captions at all.Common signal conditions which may cause captionserrors are listed below:

• Automobile ignition noise• Electric motor brush noise

• Weak snowy reception on TV screen

• Multiplex signal reception displaying pictureghosts or airplane flutter.

• Playback of poorly recorded or worn VCR tapes.NOTE:

If the TV/VCR displays a black box on the TVscreen, this means that the TV/VCR (is set to the TEXT mode. To clear |screen, select [CAPTION1], [CAP- /TION2] or [OFF]. |

/

Make sure ... 1.


1 Select "CAPTION"

Press the MENU button on theremote control.

Press the PLAY/& or STOP/V but-ton to point to "CAPTION".

-MENU- ]

TIMER PgO_gXMMINGpI_JRE co_r_4_

eLO_l(_ F_-T UpUSER'S _T UP

SEARC_

2 Select your desired caption menu

button until your desired caption s_,_'_'°"_,_,,_o,=c_K_UO- _,_r UP

menu appears. _.,_'_ u.tA_GUt, GE

([CAPTIONI], [CAPTION2], ,. _,o_c _'ff?_,j__I:tORE_ I X

[TEXTI] or [TEXT21) ....I_OEX SE_.qCH

3 Exit the caption setting modePress the MENU button on the remote control toreturn to TV mode.

TO CANCEL THE CLOSED CAPTIONSYSTEM

Repeat steps [1] and [2], select [OFF] using theEFWD/I_ or REW/II button. Press the MENU but-ton on the remote control to return to TV mode.

WHEN TIlE CLOSED CAPTION MODEIs ON

The On-Screen Display will disappear after 5 sec-onds_

• This is also true when the MUTE button is pressed,and when the PAUSE/STILL button is pressedwhile recording.

• If there is a power failure of any kind, the unit willretain its memory for this feature.

V-CHIP enables parents to prevent their childrenfrom watching inappropriate material on TV.

V-CHIP reads the ratings for programming (exceptfor news and sports programs, unedited movies onpremium cable channels, and Emergency BroadcastSystem signals), then denies access to programmingif the program's rating meets the limitations youselect. In this case, "PROTECTED PROGRAM by..." message appears on the TV screen. You canwatch the protected program by entering access code(default 0000).

To block certain ratings, follow the steps below.

• Programming may be rated by the Motion PictureAssociation of America (MPAA) or according tothe Television Parental Guidelines. In order to

block any inappropriate programming, set yourlimits in both places (MPAA RATING and TVRATING).

TV RATING SET UP

Make sure ...


1 Select"V-CHIP SET UP" ( _ -M_.u-,Press the MENU button on the / _'_remote control. I.Press the PLAY/A or STOP/V but- | _ton to point to "V-CHIP SET LIP". [ ,,___

Then, press the EFWDt_- button.

2 Input Access code I ,o_=c_Use the number buttons to enter 4-digit access code. The default code [_SS]is 0000.

3 Select "TV RATING" ( -v-e_pso_,-

Press the PLAY/A or STOP/V but- [" _*_._

ton to point to "TV RATING".

Then, press the F.FWD/I_ button.

- 15- EN9103



4 Select your desired item {

Press the PLAY/A or STOP/_' but- /,. _

ton to point to your desired item. [ _-_'_Then, press the EFWD/I_ button to _,',Iselect [BLOCK] or ]VIEW].

• When you select the rating category and turn it[BLOCK], the higher rating will turn [BLOCK]automatically. Also, the lower rating will turn]VIEW] automatically.

• When you turn "TV-Y" to ]VIEW], then all ratingswill turn to ]VIEW] automatically.

Selection Rating Category Explanations

TV-Y Appropriate for all childrenTV-Y7 Appropriate for children seven and olderTV-G General Audience

TV-PG Parental Guidance suggested.TV-14 Unsuitable for children under 14

TV-MA Mature audience only

When you select TV-Y7, TV-PG, TV-14, or TV-MAand you press the EFWD/I_- button, the sub-ratingswill appear on the TV screen.If you select the rating category (example: TV-PG)and turn it [BLOCK] or ]VIEW], the sub-ratings(example: V for Violence) will turn [BLOCK] or]VIEW] automatically.

You can set the sub-ratings to [BLOCK] or ]VIEW]individually when the rating category is set to[BLOCK].

To set the sub-ratings individually, follow the stepsbelow.

• When you select [TV-Y7]:Press the STOPiV or PLAY/&button to select "FV" (FantasyViolence).Then, press the EFWD/I_ buttonto select [BLOCK] or [VIEW].

• When you select [TV-PG], [TV-14] or [TV-MA]:

Press the STOP/V or PLAY/A button to select"D"(Suggestive Dialog),"L"(Coarse Language),"S"(Sexual Situation), or"V"(Violence). Then, press theEFWD/II_ button to select[BLOCK] or ]VIEW].

Note: When you select ]TV-MA], "D" does notappear on the TV screen.

• The sub-ratings which set to[BLOCK] appears next to the rat- ]....ing category in the TV RATING / _,-_v__ 'menu, w_,t* tsvl

5 Exit the V-Chip setting mode

Press the MENU button on the remote control toreturn to original mode.

MPAA RATING SET UP

Make sure ...


I

1 Select "V-CHIP SET UP"Pressthe MENU button on theremotecontrol.Press the PLAY/A or STOPiV but-ton to point to "V-CHIP SET UP".

Then, press the F.FWD/I_ button.

I _MEN U

T_R PRO¢_I_I_NGP_C;IURECON/ROt

¢.L00(

L_ER'3 SST _ei1,.v4;141p_=T L_,

L/_Gt._GE Et_3U,_I

ZERO ]2 (

Use the number buttons to enter 4- ] =cE__o_

digit access code. The default code lis 0000.

3 Select"MPAA RATING"

Press the PLAY/A or STOPt_' but-ton to point to "MPAA RATING".

Then, press the P.FWD/I_ button. v_a P SE_ UP -

rV FU_TING

O,U_E COC_ ]4 Select your desired item [ _ ]J

Pressthe PLAY/& or STOPS" but- / _ ,Eton to point to your desired item. 1,- _:;Then, press the F.FWDtl_ button to / xselect [BLOCK] or ]VIEW]. L

Selection Rating Category ExplanationsG General Audience

PG Parental Guidance sugges_:l.PG-13 Unsuitable for children under 13

R Restricted; under 17 requires accompa-nying parent or adult guardian

NC-17 No one under 17 admitted

X Mature audience only

• When you select the rating category and turn it[BLOCK], the higher rating will turn [BLOCK]automatically. Also, the lower rating will turn]VIEW] automatically.

• When you turn "G" to ]VIEW], then all ratingswill turn to ]VIEW] automatically.

5 Exit the V-Chip setting mode

Press the MENU button on the remote control toreturn to original mode.

- 16- EN9103



CHANGE ACCESS CODE

To chan_e access code, follow the steps.

1Press the MENU button so that the TV/VCR SETUP

display, appears on the TV screen.

-MEHU- 1

T_ER PnCGP_me_JRESEttING CLOCK

Press the PLAY/& or STOPS' but- _E.'S_'_LSET_ UP_Gu_xt[ _18 Nton 1opoint to "V-CHIP SET UP". _,_-_

Then, press the F.FWD/I_ button. T,_s_,_,INO_X SOtnCH

6

Press the MENU button to exit the TV/VCR SETUP.Note:

• If you unplug the power code or power failureoccurs, the changed access code will be lost andwill return to default (0000). Change your accesscode again as necessary.

/Use the number buttons to enter 4-

digit access code. The default code ]

is 0000. L1 set the FM mode [Press the TV/FM button on the /

remote control. The radio frequency [appears on the TV screen. [

4 r ......... 1

Press the PLAY/A or STOP/V but- 1,- _o_E Jton to point to CHANGE CODE". ]Then, press the EFWD,'_ button.

5NEW COOE

CONFIRM C_X3_

h_w COOE

xxxx

CC*,FIR,4COI_

This function enables you to receive FM radio broad-castins.

Use the number buttons to enteryour desired access code in theNEW CODE space. Then enter thesame code in the CONFIRM

CODE space. V-CHIP SET UPscreen appear on the screen.

• If you enter wrong code, repeatstep 5, making sure you enter thesame new code exactly in theconfirm code space.

FM 88.0 MHz }2 Select the radio frequency you want to receive

Press the CHANNEL • or • button until yourdesired radio frequency appears.NOTES:

• FM mode is not available for model SRC22194.

• The radio frequency indication repeats to appear

and disappear.• You can not record the FM radio wave broadcast-

ing.

• If you receive a weak radio signal, you may change

the FM Antenna mode to INT(internal) or

EXT(external) by following the step below.l)Press the MENU button. Press the PLAY/• or

STOPiV button to point to "CHANNEL SET UP".Then, press the F.FWD/I_ button.

2)Press the PLAY/A or STOP/• button to point to"P'M ANTENNA". Select [1NT] or [EXT] usingthe EFWD/I_ or REW/al button.

PLAYBACK

This TV/VCR will operate with any cassette that has the [_ mark. For best results, werecommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE PRECAUTIONS

Insert the cassette in the direction as shown. Push ingently, but continuously, on the center-back of thecassette until it is drawn into the TV/VCR. TheTV/VCR will automatically turn on.

Wind_

CORRECT WRONG

• Avoid moisture. Moisture condensation may occuron the tape if it is moved from a cold place to awarm place or visa versa. Before using a tape withthese conditions, to avoid damage of the tape andyour TV/VCR, wait until the tape has warmed to

room temperature and the moisture has evaporated.

• Avoid extreme heat, high humidity and magneticfields.

• Do not tamper with the cassette mechanism.

• Do not touch the tape with your fingers.

- 17 - EN9103



Make sure ...


1 Insert a prerecorded tape

If the erase-protection tab has been removed, theTV/VCR will start playback automatically,.

2 To begin playback r _,v.Press the PLAY button.

Note: If any menu is activated onthe screen, the PLAY button doesnot function. Press the MENU but-

ton to clear the menu, then press the PLAY button.

3 To stop playback

Press the STOP button when playback is completed.

The TV/VCR has an auto repeat function that allows

PICTURE SEARCH

This feature is very useful in finding or skipping overa particular scene on a tape. In this mode, the soundwill be muted.

1)You may view a video tape at a high speed ineither a forward or reverse direction by pressingthe F.FWD or REW button during playback (in theSP / LP 1 SUP modes). -

2)Press it again and the TV/VCR will now search insuper high speed (in the LP / SLP modes only).NOTE: Tapes recorded in the SP or LP mode willdisplay a noise bar on the TV screen and the pic-ture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

ZERO RETURN

youto repe_ a tape indefini_ly without _uching thePLAY button.

ALL REPEAT:Repeat playback from the beginningto the end of the tape.

BLANK REPEAT:Repeat playback from the begin-

ning to a blank part of more than 10 seconds.

1 Select "USER'S SET UP"Press the MENU button on theremote control.

Press the PLAY/A or STOP/_ but-ton to point to "USER'S SET UP".

Then. press the EFWD/I_ button.

2 Select "ALL" or "BLANK"

Press the PLAY[& or STOPi_' but-ton to point to "REPEAT PLAY".Press the F.FWD/II_ or REW/<Ibutton repeatedly until your desired

selection [ALL ! or [BLANK] appears.

3 Exit the Repeat Play setting

-MENO- ]

I"_4ER _GpICtURE CO_rm_._NG CLOCKCK_NNI_L SET U_

• USEWS SET UP

TIME SEARC_rNDEX

- L_ER'S SET UP - /

Press the MENU button on the remote control toreturn to the "IV mode.

4 Start playback

Press the PLAY button to start the Repeat Play."REPEAT PLAY lip" appears.• Once you select the Repeat Play mode, it stays in

effect even after you turn off the TVNCR.• If the Rental mode is set [ON], the "RENTAL

PLAY I_" display has priority.TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using theEFWD/I_ or REW/_I button on the remote control.Press the MENU button on the remote control toreturn to TV mode.

If there is a power failure of any kind, the unitwill retain its memory for this feature. - 18 -

This function allows you to search easily a beginningpoint that you want to review by rewinding or fastforwarding.NOTE:

Zero Return WILL NOT work on a blank tape or ablank portion of a tape.

1 Stop a tape at your desired pointRewind or fast forward the tape to the beginningpoint from which you want to review.

2 Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly,.

3 Begin recording or playbackPress the RECORD or PLAY button.

Press the STOP button when recording or playback iscompleted.

4 To activate "ZERO RETURN" modePress the MENU button on the remote control.

Press the PLAY/A or STOP/_' button to point to"ZERO RETURN".

Then, press the EFWD/_ button.The counter will appear on the TVscreen.

The tape will automatically stopwhen the counter returns to 0:00:00.

-MENU- 1

X_ER _FUUCMINOP_TUAE O0_rTRO-SLtriTNGCaOCK¢*bUq_*_t SET UpU6ER"S8_r iJ_v_,_p _=T tip

WOEX SEA_A

TIME SEARCH

The Time Search function makes it possible toquickly advance the tape to your desired positionsimply by entering the exact amount of playbacktime you want to skip.

EN9103



NOTES:

• Time Search can be set up to a maximum of 9hours 50 minutes (9:50) by 10 minutes at a time.

• This function will not operate in recording mode.In the example below: To watch a program that is 2hours, 50 minutes from the present tape position, ineither direction.

1 Insert a tape.

2 Select "TIME SEARCH" mode

Press the TIME SEARCH button (with each push itwill increase by 10 minutes).

Press the SLOW button to reduce the playback speed.

The TV/VCR mutes the sound during slow motion.Press the PLAY button to return to normal playback.

NOTE: If left in the Slow mode for more than five

minutes, the TV/VCR will automatically go into theStop mode.

This function enables you to improve the picturequality when playing back worn cassettes such asrented tapes.

3 Enter your desired time /-_.Press the PLAY/A or STOP/V but- J "-; ,_-

ton until your desired time appears. /(Example: 2:50 stands for 2 hours /50 minutes) [

If you wish to cancel the Time Search at this point,press the MENU button on the remote control.

1 Select "USER'S SET UP"

Press the MENU button on theremote control.

Press the PLAY/& or STOP/V but-ton to point to "USER'S SET UP".

Then, press the F.FWDtI_ button.

-MENU- I

TIMER pFIOGR_,e_INGPC;TORE_.S_nrlNG CLCCKCH,_NFJ_ SET Up

_- USEF_SSET UeV-_HIP SET U_

Z_RO RETURN

TIMES_C_INDEX

4 Begin Time Search

By pressing the REW/_I or EFWD/I_ button, theTV/VCR will rewind or fast forward to the specifiedpoint.

The time counts down as the searching progresses.When 0:00 is reached, the tape will start playbackautomatically.

TO CANCEL THE TIME SEARCH at this

point

Press the STOP/EJECT button on the TV/VCR or theremote control. This will delete the selected time.

INDEXSEARCH

An index signal is recorded on the tape automaticallywhen the recording is started.To view a recording at aspecific start point:

I ]......1)Press the MENU button on the ',,_"_,_,_plCTUp,E ¢,Ot411r_OL

remote control. Press the _'_=_'USEp_Ss_r Up

PLAY/A or STOP/V button to v-o,._,_point to "INDEX SEARCH", ,_o.then press the EFWD/I_ button. " "_=_

2)Press the PLAY/A or STOP/v button within 30seconds until the number of programs that youwant to skip appears.

3)Press the EFWD/I_ or REW/'ql button to startindex search. If you want to go forward, press theEFWD/I_ button. If you want to go back, pressthe REW/_I button.

• After index search, the TV/VCR will play the tapeautomatically.

• In some cases, the index mark at the beginning ofvideo tape cannot be detected.

- 19-

2 Set "RENTAU' to [ON] / o_..ss__ '

Press the PLAY/A or STOPiV but- /_ "_ _ __

ton to point to "RENTAL". *_g*._g_%_.-'l_-

Press the F.FWD/I_ or REW/albutton until [ON] appears.

3 Exit the Rental settingPress the MENU button on the remote control toreturn to the TV mode.

4 Start playbackPress the PLAY button to start playback. "RENTALPLAY I_" appears.• Once you select the Rental mode, it stays in effect

even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

Repeat steps [1] and [2], select [OFF] using theEFWD/I_ or REW/411 button on the remote control.Press the MENU button on the remote control toreturn to TV mode.

If there is a power failure of any kind, the unitwill retain its memory for this feature.

EN9103



In the Pause/Sti!! mode only, when the picture beginsto vibrate vertically, stabilize the picture by pressingthe CHANNEL • or • button.NOTE:

If there are video noise lines on the screen, see TrackingAdjustment section.

You can view a still picture on the TV screen duringplayback (the Still mode). Press the PAUSE/STILLbutton during playback. Only tapes recorded in theSLP mode will show the least amount of lines. Pressthe PLAY button to return to playback.NOTES:

• You can advance the picture one frame at a time bypressing the PAUSE/STILL button during the Stillmode.

• If it is left in the Still mode for more than five min-

utes, the TV/VCR will automatically switch to theStop mode.

• Tracking adjustment will be set automatically(Digital Tracking function) when you start play-back.

• However when playing pre-recorded tapes or tapesrecorded on units other than your own, noise lines(black and white streaks) may appear on the play-back picture. If this occurs, you can adjust thetracking control manually by pressing the CHAN-NEL • or • button until the streaks disappear. Toreturn to the DTR function, stop the tape once andstart playback again.

• You can reduce the noise lines by pressing theCHANNEL • or • button in slow mode, too.Tracking adjustment in Slow mode will not be setautomatically.

NOTE:

• In Still mode, press the SLOW button and press theCHANNEL • or • button until streaks disappear.To return to Still mode, press the PAUSE/STILLbutton again.

RECORDING

Before recording, make sure:

The desired channel is selected by pressing the num-ber buttons on the remote control or the CHANNELUp/Down button. (If the TV/VCR is connected to acable box or satellite box, the TV/VCR must be onCH3 or CH4, then the channel to be recorded isselected on the cable box or satellite box. )

There is a tape with its safety tab into the VCR.The desired recording speed is selected in SP(stan-dard play) or SLP(super long play) mode by press-ing the TAPE SPEED button on the VCR.

Tape Speed

I peof tapeSP mode

SLP mode

Recording/Playback Time

T60 T120 T160

1 hour 2 hours 2-2/3 hours

3 hours 6 hours 8 hours

ERASE PREVENTION

You can prevent acciden-tal erasing of recordingby breaking off the tabon the back edge of thecassette.

If you decide to recordon the tape again, coverthe hole with plastictape.

IPlasticTape

Make sure ...

• TV/VCR power is turned on.• Insert a cassette tape with its erase prevention tab

in place. (If necessary, rewind or fast forward thetape to the point at which you want to beginrecording.)

NOTE: This unit will ONLY record and view thesame channel.

l)Begin the recording by pressing the RECORD but-ton.

To temporarily stop recording or resume it, pressthe PAUSE/STILL button. After the VCR has beenin Pause mode for 5 minutes; it will stop automati-cally to protect the tape and the video head.

NOTES:

• After five minutes, the TV/VCR will automaticallyswitch to the Recording mode to prevent tapedamage.

• If "CLOSED CAPTION (ON)" is selected, theOn-Screen Display will appear for 5 seconds, thendisappear.

2)Stop the recording by pressing the STOP buttonwhen recording is completed.

- 20 - EN9103



This function enables you to set the recording lengthsimply by pressing the REC/OTR button on theVCR.

1)Begin OTR by pressing theREC/OTR button on the VCRrepeatedly until the desiredrecording length appears.Recording stops when 0:00 isreached.

NOTES:

• This function CANNOT be done from the remotecontrol.

• To stop the OTR operation, press the STOP buttonon the TV/VCR or on the remote control.

• If the tape runs out before the end time, theTV/VCR will switch to the Stop mode immediate-ly, eject the tape and turn itself off.

Push(es)

1 push2 pushes3 pushes4 pushes

4"17 pushes

Display Recording length(continuous recording)

0:30 30 minutes1:00 60 minutes1:30 90 minutes

4, 4,8:00 480 minutes

You may set the TV/VCR to start and end a record-ing while you are away. You can set 8 programs torecord on specific days, daily or weekly within a 1year period.

In the example below, the timer is being set to record:DATE: July 5th, 2002SETTING TIME: from 7:30PM to 8:50PMCHANNEL: CH61

TAPE SPEED: SP

Make sure ...

• If your TV/VCR is connected to a cable or satellitebox, you must set the TV/VCR to channel 3 or 4to match the output channel of the box.

• Clock is set to the correct time and date before set-ting the timer.

• TV/VCR power is turned on to program it.• To insert a cassette tape with its erase prevention

tab in place. (If necessary, rewind or fast forwardthe tape to the point at which you want to beginrecording.)

• To set the channel you want to record

Avoid overlap of programs ...

There is a chance that a program will not be record-ed. When programs overlap:• The program with the earliest start time wil_record

first.

• Once the earliest program finishes recording, theoverlapping programs will record in the order ofthe program number.

• The illustration below demonstrates the sequenceof recording:

p_mm 1

10:_1-11 m :

I1:00,_-10:N

prognlm $ '9:30AM-I 2:_,_PM ,

I;00_M 10:_M_ 11_OAM 12_4=M

'R_CVpedod_ $/€_EO

1 Select"TIMER PROGRAMMING"Press the MENU button on the remote control.

Confirm "TIMER PROGRAM ....... 1riMER PR(_P*Ak_ING LMING" is pointed to by pressing s_*_e_,_'_"_

the PLAY/& button. _*_._V4_P SET UP

Press the EFWD/_ button .... _ZERO _rt/_

• If you have not yet set the clock, ,*_s_"MANUAL CLOCK SET" appears. If so, followstops [3] to [8] on page 11 and 12. Then set thetimer recording.

2 Select your desired program position (1-8)

f I..........Press the PLAY/A or STOPiV but- _ _ _ _ton to select the desired programposition. :; : ::: ¢: ::::::

Then, press the F.FWD/I_ button. :: .: ::: :_:: :;: .:

3 set the channel numberPressthePLAY/A or STOP/V but-tonuntil the desired channel num-ber appears.

(Example: CH61)Then, press the F.FWD,,I_ button.Remember:

%4_,4 ...... :.. .: ....

._._, 4 ...... :.. <....

.. 4 ...... :.. .>...

If your TV/VCR is connected to a cable or satellitebox, you must set the TV/VCR to channel 3 or 4 tomatch the output channel of the box.

4 Select once, every day or weekly recording

For once recording :

Press the PLAY/A (up) buttonuntil the desired date appears.(Example: "7/05" for July 5th).Then, press the EFWDII_ but-ton.

- 21 - EN9103



For every day recording : Torecord a TV program at the same

time on the same channel everyday. (Example: Monday throughSunday)

Press the STOP/T (down) but-

i _ r_n PnC_n_CJih_5 ]/ .....

.. \.zJ. L l._- :

k' ..... Jton until "EVRY DAY" appears. Then, press theEFWDt_" button.

10 Finish setting the program

Press the F.FWDtI_ or REW/_I button. The programis now completed.

• To set another program, repeat steps [2] to [10].• Press the MENU button on the remote control to

return to original mode.

For weekly recording : To record a TV program atthe same time on the same channel every week.(Example: every Monday)

[

theSTOP/,,(down)button/ /until "EVRY" and your desired | :: _: ::: ::: ::: ::|day of the week appear together. _ _'_@_1_,'_:::: :: [Then, press the F.FWD/I_ but- Iii _iiiii ii :: ii/ton. " _ '

11 Set the timer .

Press the POWER button to set automatic timerrecording. The RECORD indicator lights up.• You must turn off the TV/VCR to activate automat-

ic timer recording.

If power is not turned off and you continue watch-ing TV, "TIMER REC STANDBY" starts flashingon the TV screen 2 minutes before the programmedstart time.

5 Set beginning hourPress the PLAY/A or STOP/_' but-ton until the desired hour appears.(Example: " 7, PM" for 7:30PM)Then, press the EFWD/I_ button.

o_ c,_ aE_4 _Na

.t. ..... :.. ....

6 Set beginning minute / .......... /Pressthe PLAY/A or STOPS' but- / _ .... /tonuntilthedesiredminuteappears./:: iii ii,i]i::/(Exam le" 30 for 7"30PM ...... l._ ....p • ) I'........ --/Then, press the EFWD/I_ button. L " _::::: ::: ': ::J

7 setend hour

Press the PLAY/A or STOP/_' but-ton until the desired hour appears.(Example: "8, PM" for 8:50PM)


I _ TIMER _O0_AM_I_ - ]

O440_. _ a_ _O

.. 4.... :.. _LxJ*,.

-- _........ _..l :: _::::: !!! !ii ill

8 Set end minute _"-_,_.PressthePLAY/A or STOP/_ but-/ : r7tonuntil the desired minute appears./ :: _::::: .i._,,:_i:_::(Example: "50" for 8:50PM) ]"r! _' _.Then, press the EFWD/I_ button. [. .............

9 Set the tape speedPress the PLAY/A or STOP/_ but-ton until the desired tape speedappears. (Example: SP) t _TII_Rp_,op, AM_IhG - t

04 _11E 8_01_ _D

4 .:.. .:.._'+X

ii _iiiii iii iii!_

To shift the time schedule of an automatic timerrecording.1)Press the POWER button.

2)Repeat step [1] on page 21.3)Press the RECORD button and select the desired

program using the PLAY/A or STOP/V button.

4)Press the RECORD button again.Each additional push will shift forward thebegin/end time for recording by 10 minutes. Whenthe recording is already in progress, each additionalpush will shift forward the end time only. If youwant to cancel while setting, press thePAUSE/STILL button on the remote control. The

recording time returns to the original time.NOTE: When you shift forward the time scheduleduring recording; the recording speed will automati-cally be set to the SLP mode.5)Press the EFWD,!I_ or REW/_I button to exit the

setting menu. Then press the MENU button on theremote control to return to original mode.

TO CORRECT A PROGRAM

• While setting a program; press the REW/<I but-ton to go back one step and enter the correct num-bers using the PLAY/A or STOP,_ button.

• After setting a program;1)Press the POWER button.

2)Repeat steps [1] - [2] on page 21.3)press the EF'WD_ button (or press the REW/_I

button to go back one step) until the part youwant to correct begins flashing, then make thechanges pressing the PLAY/A or STOP/_ but-ton.

4)Press the POWER button to set automatic timerrecording.

- 22 - EN9103



TO CANCEL AN A UTOMATIC TIMERRECORDING

• After setting a program;1)Press the POWER button.

2)Repeat steps [1] N [2] under TIMER RECORD-ING, page 21, and select a program you want tocancel.

3)Press the T-PROG. CLEAR button.4)Press the MENU button on the remote control to

return to TV mode.

• While recording is in progress;1)Press POWER button.

2)Press the STOP/EJECT button on the TVNCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicatorgoes off.

2)Press the MENU button on the remote control.3)Confirm "TIMER PROGRAMMING" is pointed

to.

4)Press the EFWD/I_ button. The details of pro-grams appear on the TV screen.

5)Press the MENU button on the remote control toreturn to TV mode.

• Make sure the channel you want to record is prop-erly set in advance.

• It is not necessary to press the RECORD button fortimer recording.

• Recording begins automatically at the Start time.• If you are recording using a Timer mode, you may

not operate the unit manually.• The erase-prevention tab on the cassette must be in

place (or you must put tape over the hole).• If the erase-prevention tab is removed, the cassette

will be ejected when the POWER button is pressedto off.

• If the tape runs out before the end time, theTV/VCR will switch to the Stop mode immediate-ly, and the tape will be ejected.

With this feature, after timer recording is finished,the beginning of the recorded program(s) can besearched for automatically.

Press the PLAY/A or STOP/V but- __ton to point to "AUTO RETURN". ,%_L_,_Press the EFWD/I_ or REW/<Ibutton until [ON] appears. Thenpress the MENU button on the remote control toreturn to TV mode.

3 Auto Return will begin

When all the timer recordings are completed, theTV/VCR will rewind to the beginning of the recordedprogram(s).NOTE:

• If you press the POWER button while tape isrewinding, the Auto Return will stop.

4 Watch the recorded programPress the PLAY button.

TO CANCEL THE AUTO RETURN

MODE

Repeat steps [1] and [2], select [OFF] using theEFWD/II_ or REW/_I button. Then, press the MENUbutton on the remote control to return to TV mode.

If there is a power failure of any kind, the unitwill retain its memory for this feature.

The Wake Up Timer function turns on the TV/VCRwithout using the POWER button after a desiredperiod of time.NOTES:

• Use the remote control for this procedure.• Clock must be set to the correct time before setting

the timer.

• If yon want to select [TAPE], you must insert acassette tape in the TV/VCR. The tape will startplayback automatically'on your desired time.

1 Select "WAKE UP TIMER"Press the WAKE-UP/SLEEP buttonon the remote control once, andconfirm "ON/OFF" is pointed.Press the EFWD/I_" or REW/_Ibutton until [ON] appears.

1 Select"USER'S SET UP"Press the MENU button on theremote control.

Press the PLAY/A or STOP/_' but-ton to point to "USER'S SET UP".Then, press the F.FWD/II_ button.

-t4ENU_ 1

¥_ER _ING

_TURE CONTRt_LSETnNG CLOCK¢JA/_'_EL SET Up

1. t_S S_X UpV_HIP _ UPLANGU/_E NGH$_I

_E_X

- 23 - EN9103



2 Select "TV" or "TAPE" _Press the PLAY/A or STOP/• but- | /ton until it points to "TV/TAPE". | /Press the F.FWD/_ or REW/_I Iw..... ,_ /button, and select [TV] or [TAPE]. [".... _%r_-4_'_J

3 Set wake up time (Press the PLAY/& or STOP/• but- / /ton until it points to "TIME". / /

Press the EFWD/I_ or REW/_I I_ _,_ _ /button until your desired wake up [ "_"_ "_m@Jtime appears.Each additional push will increase (or decrease) thetime by 10 minutes.

4 Exit theWake UpTimer settingPressthe MENU button on the remote control toreturn to TV mode.

TO CANCEL THE WAKE UP TIMER

Press the WAKE-UP/SLEEP button on the remotecontrol once, and confirm "ON/OFF" is pointed.Press the EFWD,,_ or REW/_I button until [OFF]appears.

The Sleep Timer function turns off the TV/VCRwithout using the POWER button after a desiredperiod of time.NOTE:

• This function does not operate during Recordingmode.

1 Select '/SLEEPT-IMER''Press the WAKE UP/SLEEP button on the remote

control until "SLEEP TIMER" appears.

2Seteeime[ ]Press the PLAY/A, STOP/V,EFWD/I_ or REW/_I button until

your desired sleep time appears.Each additional push will increase _EP_ME,_the time by 30 minutes up to 120 minutes.Press the MENU button on the remote control to exitthe Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the WAKE UP/SLEEP button on the remotecontrol until "SLEEP TIMER" appears.To view the time left for sleep timer, press theWAKE-UP/SLEEP button twice, then press theMENU button on the remote control to exit the sleeptimer setting.

COPYING A VIDEO TAPE

You can make copies of video tapes made by friendsor relatives for your enjoyment.

WARNING: Unauthorized recordings ofcopyrighted video tapes may be anInfringement of copyright laws.

Connect your TV/VCR and a Source (Playing) VCRusing the following diagram.

[The TVNCR]

[Ex:Source (playing)VCR or camcorder]

AudioNideoadapter cable k 0_°@

(not supplied) _0=o_

1)Insert a pre-recorded video cassette into the Source(Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want torecord over, into the TV/VCR's cassette compart-ment.

3)Press the SPEED button on remote control for theTV/VCR to select the desired recording speed(SP/SLP).

4)Press the CHANNEL A or • button on theTV/VCR until "AUX" appears on the screen.

NOTE: "AUX" is found below the lowest numbered

memorized channel. (Example: CH2)5)Press the RECORD button on the TV/VCR.

6)Begin playback of the tape in the source (Playing)VCR or camcorder.

NOTE: For best results during copying, use theTV/VCR's front panel controls whenever possible.The remote control might affect the source (Playing)VCR's playback operation.

-24 - EN91o3



ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remotecontrol. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:WHEN THE CLOSED CAPTION MODE IS OFF:

<Off mode>• Counter mode: After 5 seconds, only

the counter remains. To clear it, press rthe DISPLAY button.

• Clock mode: After 5 seconds, onlythe clock and the channel number

remain. To clear them, press the DIS- •PLAY button. /

<Countermode> <Clock mode>

+-].........! once[I

Pressonce

WHEN THE CLOSED CAPTION MODE IS ON:

• The On Screen Display disappears after 5 seconds.• This is true even if the MUTE button is pressed, or the

PAUSE/STILL button is pressed while recording.

OFF mode Clock/Counter mode

SPECIAL FEATURES

This shows the elapsed recording or playback time inhours, minutes, and seconds. (The displayed timewill not change on a blank tape or blank portions onthe tape.)The "-" indication will appear when thetape has rewound further than "0:00:00" on the tapecounter.

• When the end of a tape is reached during record-ing, playback, or fast-forward, the tape will auto-matically rewind to the beginning. After rewindingfinishes, the TV/VCR will eject the tape and turnitself to off.

• This function is operative when Repeat Play is setto the [OFF] position.

• The tape will not auto-rewind during timer record-ing or One Touch Recording.

MAINTENANCE

CABINET CLEANING

• Wipe the front panel and other exterior surfaces ofthe TV/VCR with a soft cloth immersed in luke-warm water and wrung dry.

• Never use a solvent or alcohol. Do not spray insec-ticide liquid near the TV/VCR. Such chemicalsmay cause damage and discoloration to theexposed surfaces.

A UTO HEAD CLEANING

• Automatically cleans video heads as you insert orremove a cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupt-ed while the TV program reception is clear. Dirtaccumulated on the video heads after long periodsof use, or the usage of rental or worn tapes cancause this problem.If a streaky or snowy picture appears during play-

back, the video heads in your TV/VCR may needto be cleaned.

l.Please visit your local Audio/Video store and pur-chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the prob-lem, please call our help line at 1-800-968-3429, tolocate an Authorized Service Center.

NOTES:

• Remember to read the instructions included withthe video head cleaner before use.

• Clean video heads only when problems occur.

SERVICING

• Should your TV/VCR become inoperative, do nottry to correct the problem by yourself. There are nouser-serviceable parts inside. Turn off, unplug thepower cord, and please call our help line at 1-800-968-3429, to locate an Authorized Service Center.

- 25 - EN9103



TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR,locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column toremedy the problem.

PROBLEM

No power.

No picture and sound.

No picture or poor picture onTV/VCR.

No sound or poor sound.

Timer recording is not possible.

Cannot go into Record mode.

Playback picture is partially noisy.

No picture but the audio is OK inplayback.

No operation by infrared RemoteControl.

Video or color fades in and out

when making a copy of a video tape.

CORRECTIVE ACTION

• Make sure the AC cord is connected to an AC outlet.

• Make sure the power is turned on.• Make sure the AC cord is connected to an-AC outlet.

• Check antenna connection.

• Let the TV/VCR program its tuner memory.

• Adjust direction or replace antenna.• Adjust picture controls.

• Adjust volume control on remote control or main unit.• Press the MUTE button to restore sound.

• Make sure the timer recording is set correctly.• Make sure the power is off.

• Make sure the TV/VCR clock is set correctly.

• Make sure the tape has an erase-prevention tab. If need, cover thehole with plastic tape.

• Adjust tracking control for a better picture using the CHANNEL •or • button on the TV/VCR.

• Head cleaning may be necessary. Refer to "AUTO HEADCLEANING" on page 25.

• Make sure the AC cord is connected to an AC outlet.

• Check batteries in remote control.

• You can not copy a copyrighted video tape. You are experiencingcopy guard protection.

CLOSED CAPTION PROBLEM

My TV/VCR is showing captionsthat are misspelled.

My TV/VCR will not show ihe textin its entirety or there is a delay ofwhat is being said.

My captions are scrambled withwhite boxes on the 'IV screen.

My program guide listed a TV showas being closed captioned but noneof the captions were displayed.

My prerecorded video tape does notshow any captions. The tape boxmentions it being closed captioned.My TV screen shows a black boxon certain channels.

POSSIBLE REMEDY

• You are watching a live broadcast and spelling errors made by the Iclosed captioning production company may pass through uncorrected.A prerecorded program will not show any misspelled words becauseof the normal time available for editing the captions.

i • Captions that are delayed a few seconds behind the actual dialogueare common for live broadcast. Most captioning production companiescan display a dialogue to a maximum of 220 words per minute. If adialogue exceeds that rate, selective editing is used to insure that thecaptions remain up-to-date with the current TV screen dialogue.

• Interference caused by building, power lines, thunderstorms, etc.may cause scrambled or incomplete captions to appear.

• Broadcasters may at times use a time compression process to speedup the actual program so that additional advertising time can begiven. Since the decoder cannot read the compressed information,captions will be lost.

• The video tape was either an illegal copy or the tape duplicatingcompany accidentally left out the captioning signals during thecopying process.

• You are in the TEXT mode. Select CAPTION mode to CAPTION[OFF].

- 26 - EN9103



SPECIFICATIONSGENERAL SPECIFICATIONS

CRT : 13 or 19 inch in-line gun, 90*deflection tube

Television system : NTSC-MClosed caption system :§15.119/FCCVideo Heads : Rotary four-headTape width : 1/2 inchTape speed

SP : 33.40mm/sec.LP : 16.67mm/sec.SLP : 11.12mm/sec.

Tuner channelTV VHF Low : #2,-#6TV VHF High : #7--.#13TV UHF : #14,--#69CATVVHF : 5AMID band : A5~A1, A-ISUPER band : J-WHYPER band : W+l-W+84

FM: 88~108MHz (SRC22134 only)Terminals

Antenna input : VHF/UHF 75 ohmsunbalanced

Video input : RCA connector × 1Audio input : RCA connector × 1Earphone : 1/8" monaural (3.5 mm)

ELECTRICAL SPECIFICATIONS

Video input level :Audio input level :

Video S/N ratio :Audio S/N ratio :

0.5-2.0Vp-p-15dBsMore than 46dBMore than 43dB

OTHER SPECIFICATIONS

[ SRC22134 ]Power requirement :Power consumption :Dimensions :

Weight :

[ SRC22194 ]Power requirement :Power consumption :Dimensions :

Weight :

AC 120V/60Hz65WH: 15-3/8" (389mm)W:14-1/2" (367mm)D: 14-7/8" (377mm)23.1 lbs (10.5kg)

AC 120V/6OHz80W

H: 17-3/8" (439mm)W:19-3/8" (491mm)D:I 8-3/4" (475mm)43,0 lbs (19.5kg)

• Designs and specifications are subject to changewithout notice and without our legal obligation.

• If there is a discrepancy between languages, thedefault language will be English.

CABLE CHANNEL DESIGNATIONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channelswith letters or letter-number combinations. Please check with your local cable company. The following is achart of common cable channel designations.

CATVchannel 5A 2 3 4 5 6 7 8 9 10 11 12 13 A B...........................................................

TVDisplay 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

CATVchannel C D E F G H I J K L M N O P Q

TVDisplay 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

CATVchannel R S T U V W W+I W+2 W+3 W+4 W+5 W+6 W+7 W+8 W+9

TVDisplay 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

CATVchannelW+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24.............................................................

TVDisplay 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

wt L__w 90wt!! .wt L.__wz w,34w*35w,36w*37 w+39TVDisplay 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

CATVchannelW+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48i W+49 W+50 W+51 W+52 W+53 W+54.....................................

-TVDis_ay 76 77 78 79 80 81 82 83 84 85 86 87 88 89 . 90

C_A__ne!.W_t§5_,__W_t56"W+57_÷__W_58_._A:§_.__A_-4_. A-3 _A:2__,_A-1 . W+59 W+60 W+61 W+62_._W_t69_._W_t_.TVDisplay 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105

CA'rVchannelW+65 W+661W+67 W+68 W+69 W+70 W+71 W+72 W+7: W+74 W+75 W+76 W+77 W+78 W+79......................

TVDisplay 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

CATVchannelW+80 W+81I W+82 W+83 W+84

TVDisplay 121 122 123 124 125

- 27 - EN9103



INDICE

CONTROLES DE OPERACION YSUS FUNCIONES ........................ 28

CONEXIONES DE ANTENA/CABLE ........ 30

MODO DE ENTRADA EXTERNA ........... 31

INSTALACION DE LAS PILAS ............. 31

PREPARACION DE CANALES PORPRIMERA VEZ .......................... 31

AJUSTE DEL RELOJ ..................... 31

Este manual sirve para los modelos de 13" y 19". A excepci6n de la apariencia, la operaci6n de los dos modelos es exac-

tamente la misma. En este manual se muestra el mode o de 9.

NOTA:

No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante unmando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con elndmero de cddigo dado tal vez no se pueda controlar la unidad. En este caso, p6ngase en contacto con el fabricante delmando a distancia universal.

-PANELDELANTERO

1 2 3 4 5 6 78910111213 14- CONTROL REMOTO -

SRC22134

3--

15--

16--17--8--

7--

11--18--

20 i

G C_ CD C_

Q _ C2_-

--25

--7

--24

m5

m4

--23--9--10

--22

--21

1 Toma de entrada de video (VIDEO)- Con&:tela ala toma de salida de vfdeo de su videoc_mara u otravideograbadora.

2 Toma de entrada de audio (AUDIO)- Con_ctela ala toma de salida de audio de su equipo de audio,videoc_Lmarau otra videograbadora.

3 Bot6n de la alimentacl6n (POWER)- Pdlselo paraencender y apagar el televisor/videograbadora. Pdlselopara activar la grabaci6n con temporizador.

- 28 -

SRC22194

3--

15--

16--17_8--

7--

11--18--

19--2O

dS-

--25

--7

--24

--5

--4

--23--9--10

--22

--21

4 Botones de volumen (VOLUME A IV)- Ajustanel nivel del volumen.

5 Botones de canales (CHANNEL A/v)- Pflselospant seleccionar los canales deseados para ver o grabar,Se puede mostrar el mend principal en la pantalla deltelevisor pulsando repetidamente este bot6n del televi-sor/videograbadora.

ES0129



- PANEL TRASERO -

©

Funcl6n de segulmlento- Pulse los botones paraminimiz_ el ruido de video (Ifneas o puntos en la pan-talla) durante la reproducci6n.

6 Ventanilla sensora del mando a distancia-

Recibe las sefiales infrarrojas procedentes del mando adistancia.

[ Televisor/videograbadora ]

7 Bot6n de parada (STOP)-- Pdlselo para detener lacinta.

Botdn de expulsl6n (EJECT)-Pdlselo en el modode parada para expulsar la cinta deltelevisor/videograbadora.Bot6n v-

• Pdlselo para seleccionar los modos de ajuste desde elmendde la pantana.

• Pdlselo para introducir digitos cuando establezca unprograma.(Por ejemplo: Para ajustar el reloj o establecer un pro-grama de temporizador)[ Control relnoto ]

7 Bot6n de televisor/modulacl6n de frecuencia(TV/FM) (SRT22134) - Establece el modo FM.

7 (Bot6n de expulsi6n (EJECT) (SRT22194)-Ptilselo en el modo de parada para expulsar la cinta deltelevisor/videograbadora.

8 aot6n de rebobinado (REW)- Ptllselo pararebobinar la chat,a,o para ver la imagea ea relrocesor,5.pido durante el modo de reproducci6n. (Bfisquedacon rebobinado)Bot6n <1-

• Ptilselo para seleccionar un modo desde un mendpar-ticular.

(Pot ejemplo: IDIOMA o ADJUST DE USER)9 BotOn de repmduecl6n (PLAY)- Palselo pant ini-

ciar la reproducci6n.Botdn &-

• Pdlselo para seleccionar los modos de ajuste desde elmendde la pantalla.

• Pdlselo para introducir dfgitos cuando establezca unprograma.(Por ejemplo: Para ajustar el reloj o establecer un pro-grama de temporizador)

10 Bot6n de avan_ rdpido (F.FWD)- Ptllselo paraavanzar ntpidamente la cin'ta,o paravet la imagen enavance r_lpido durante el modo de reproducci6n.(Btlsqueda con avance ntpido)

26 27Bot6n I_-

• Cuando establezca un programa (por ejemplo: paraajustar el reloj o para estableeer un programa de tem-porizador), pdlselo para determinar su elecci6n y vayaaI paso siguiente que quiera intmducir.

• Pdlselo para determinar los modos de ajuste desde elmentide la pantana.

• Pulselo para seleccionar un modo desde un menfipar-ticular.

(PUr ejemplo: IDIOMA o ADJUST DE USER)

11 Bot6n de grabacl6n (REC)- POlselo para iniciar lagrabaci6n manual.Bot6n de grabaci6n de un toque (OTR)- Activala grabaci6n de un toque. ($61o en eltelevisor/videograbadora)

12 Indicador de grabaci6n (RECORD)- Parpadeadurante la grabaci6n.Se enciende en el modo de espera de la grabaci6n contempofizador.

13 Toma de aurlculares (EARPHONE)- Para conec-tar los auriculases (no suministrados) y escuchar enprivado. La toma es mono y tiene un tamafio de 3,5m133.

14 Compartlmlento del videocasete

IS Botones numerados- Pdlselos para seleccionarloscanales deseados para ver o grabar. Para seleccionareanales del 1 al 9, pulse primero el bot6n 0 y luego elbot6n 1 a 9.Bot6n +100- Cuando seleccione eanules de tele-

visi6n por cable cuyo ndmero sea superior al 99, pulseprimero este bot6n, y luego pulse los dos dltimos dfgi-tos. (Para seleccionar el canal 125, pulse primero elbot6n "+100" y luego el "2" y el "5".)

16 Botdn de mend (MENU)- Pfilselo para visualizar elmendprincipal en la pantulla del televisor.

17 Rot6n del vlsualizador (DISPLAY)- Visualiza elcontadoro el ndmerodel canal actualy la hora actualen la pantalla del televisor.

18 Botdn de velocidad de clnta (SPEED)- Pfilselopara elegir la velocidad de grabaci6n deseada: SP/SLP.

19 Bot6n T-PflOG. CLEAR- Pdlselo para eancelar unprograma de temporizador.Bot6n de reposici6n del contador (COUNTERRESET)- Pdlselo para reponerel contadora 0:00:00.

20 Bot6n de juego (GAME)- Estabiece el modo deljuego y el modo de entrada extema al mismo tiempo.

21 Bot6n de cdmera lenta (SLOW)- Pulselo paraactivar la reproducci6n a camera lenta.

- 29 - ES0129



22 Bot6n de pausa/Imagen flJa (PAUSE/STILL)-Ptllselo para detener temporalmente la cinta durante lagrabaci6n o para ver una imagen fija durante la repro-ducci6n.

23 Bot6n de sllenclamlento (MUTE)- Silencia elsonido. Pfilselo de nuevo para recuperar el sonido.

24 Bot6n de retorno de canal (CHANNELRETURN)- Pdlselo para volver al canal anterior. Porejemplo, pulsando una vez este bot6n, la visualizaci6ndel canal cambiar_i de 3 (canal actual) a i0 (canal ante-

riot), y al pulsarlo por segunda vez, el canal eambiar,5del 10al 3.

25 Botdn del temporlzador despertador/paradormlr (WAKE-UP/SLEEP)- Ajusta el tempe-rizador para despertarse/dormir.

26 Cord6n de allmentacldn- Con_ctelo a la toma deCA estAndar (120V/60Hz).

27 Terminal de antena (ANT.)- Para conectar unaantena o sistema de televisi6n por cable.

Caja de CATVo caja de emi-siones via sat_lite(no inclufdo)

Desde el cable coaxial ocaja de emisiones viasat_lite de 75 ohm delsistema de Cable

_ _tena combinada deAntena de varilla UHF/VHF _ VHFAIHF(inclufdo para solamente 13") _ (no inclufdo)

i Antena VHF(no inclutdo)

Desde elAntena UHF(no inclufdo)

Cable coaxialde 75 ohm (no incluldo)

o

=0 0

ANTENA COMBINADA DE VHF/UHF

La antena de vadlla de VHF/UHF (incluIdo para solamente13") es desmontable. Inserte el v_istago de la antena en elagujero de la parte trasera superior deltelevisor/videogr abadora.Conecte la varilla de antena de VHFAIHF o la antena com-bmada de VHFAJHF al terminal ANT. deltelevisor/videograbadora.

ANTENAS SEPARADAS DE VHF/UHF

En algunos lugares ser_ necesario utilizar una antena exte-rior.

CABLE SIN CONVERTIDOR/DESCODIF1CADOR

Utilice esta conexi6n si su sistema de televisi6n por cablese conecta directamente a su televisor/videograbadora sinconvertidor.Utilizando esta conexi6n usted podr_i:1)Utilizar el mando a distancia del televisorPcideograbado-

ra para seleccionar canales.2) Programar uno o mils canales sin codificar para realizar

la grabaci6n autom_.tica con temporizador.NOTA: Con esta unidad SOLO se podrd grabar y ver unmismo canal al mismo tiempo.

CABLE CON CONVERTIDOR/DESCODIFICADORO CONVERTIDOR DE EMISIONES V_A SAT1ELITE

Si su servicio de televisi6n por cable le suministra un con-vertidor, o si usted utiliza un sistema de emisiones viasatdlite, usted podr_i utilizar las conexiones b_icas.

Utilizando estas conexiones, usted tambi6n podr_ grabarcanales codificados. Sin embargo, la selecci6n de loscanales deber,_ hacerse con el convertidor de televisi6n percable con el convertidor de emisiones via satdlite. Esto sig-nifica que los eanales no podr_ set cambiados con elmando a distancia del televisor/videograbadora. Lagrabaci6n inatendida se limita a un canal cada vez.PARA GRABAR UN CANALCODIFICADO/DESCODIFICADO

1.Ajuste el selector de canales del televisor/videograbado-ra al canal de salida del convertidor de televisi6n porcable o del convertidor de emisiones via satdlite. (Ej.:CA3)

2. Seleccione el canal que desee grabar de su convertidorde televisi6n [mr cable o del convertidor de emisionesvia satdlite.

- 30 - ES0129



Cuandoutiliceunaserial de entrada extema (otravideograbadora o una videoc_nara), conecte los cables desalida de audio/video del equipo de reproduccidn alastomas AUDIO IN/VIDEO IN de suteleviser/videograbadora. Y luego pulse el bot6n CHAN-NEL • o • hasta que "AUX" aparezca en la pantaUa.Usted puede programar el tempofizador para que exploretodos los canales que puedan recibirse en su zona.

1)Abra la tapadel compartimiento de las pilas del mandoa distanciapresion_.ndolaen el sentido de la flecha.

2)Inserte 2 pilas tamafio "AA" en el compartimiento de laspilas, en el sentido indicado por las marcas de polaridad(+/-).

3) Vuelvaa poner la tapa.

1) Enchufe el cable de alimentaci6n deltelevisor/videograbadora en una toma de CA est_ndar.

NOTA: Si aparezcan algunos digitos en el rinc6n de lapantalla, pulse el bot6n POWER sin deseuchufar el cablede alimentaci6n.

2) Pulse el bot6n POWER para enceuder eltelevisor/videogr abadora.

3) Seleccione _'ENGLISH" o "ESPAlqOL" utilizando elbot6n EFWD/_ o REW/_I. "[ ]" indica el idiomaseleccionado.

4) Pulse el bot6n PLAY/& o STOPiV para sefialar"AU'I_PRES ELECCION".

Luego pulse el botdn EFWD_. El sintonizador explo-rar, l y memorizarfi todos los eanales activos de su _lrea.

NOTAS:

• El televisor/videograbadora distingue entre los canalesde televisi6u est,lndar y los canales de televisor porcable.

• Si desea reproducir o grabar una cinta ANTES de prea-justar el sintonizador, usted tendr_ que pulsar el bot6nMENU en el mando a distancia. Pura preajustar denuevo el sintonizador, consulte "REPETICION DE LAPREPARACI_N DE CANALES".

• La unidad de televisor/videograbadora puede reconocerlos canales de TV como enos de TV por cable a causade los condiciones de recepci6n. En este caso, pruebe elpreajuste autom_.tico de nuevo en los condiciones finasde recepci6n.

5) El sintonizador se para en el canal memorizado m_isbajo. Si desea recuperar canales seleccionados, ustedpodr,_ seleccionar directamente el canal deseado con losbotones numerados del mando a distancia o con losbotones CHANNEL • o V.

Cerci6Tese...

• La alimentaci6n del televisor/videograbadora deber_iestar conectada.

En el ejemplo de abajo, el reloj va a ajustarse ast:FECHA: 7 de mayo de 2002HORA: 5:40 PM1) Pulse el bot6n MENU en el mando a distancia.

Pulse el bot6n PLAY/• o STOP/V para indicar"AJUSTE RELOJ". -

Luego, pulse el bot6n EFWD/IP-.2) Pulse el bot6n PLAY/• o STOP/• para indicar

"AJUSTE MANUAL RELOJ".

Luego, pulse el bot6n EFWD/I_.3) Pulse el bot6n PLAY/• o STOP/V hasta que aparezca

el mes deseado. (Ejemplo: Mayo - 05)Luego, pulse el bot6n EFWD/II_.

4) Pulse el botdn PLAY/• o STOP/• hasta que aparezcael dla del mes deseado. (Ejemplo: 7 - 07)Luego, pulse el botdn EFWD/II_.

5) Pulse el bot6n PLAY/A o STOP/V hasta que aparezcael afio deseado. (Ejemplo: 2002)

Luego, pulse el bot6n EFWD/I_.6) Pulse el bot6n PLAY/A o STOP/_' hasta que aparezca

la hora deseada. (Ejemplo: 5, PM)Luego, pulse el bot6n F.FWD/I_.

7) Pulse el bot6n PLAY/A o STOPiV hasta que aparezcael minuto deseado. (Ejemplo: 40)

8) Pulse el bot6n MENU en el mando a distancia. Aunquelos segundos no se visualizan, _stos empiezan a contardesde 00 cuando se pulsa MENU en el mando a distan-cia. Utilice esta funci6n para sincronizar el reloj con lahora correcta.

-31 - ES



Get ft fixed: at yuur home or ours!For repair of major brand appliances in your own home...

no matter who made it, no matter who sold it!

1-800-4-MY-HOME sM Anytime,day or night(1-800-469-4663)

www.sears.com

To bring in products such as vacuums,lawn equipment and electronics for repair, call for

the location of your nearest Sears Parts & Repair Center.

1-800-488-1222 Anytime, day or night

www.sears.com

For the replacement parts, accessories and owner's manualsthat you need to do-it-yourself, call Sears PartsDirect sM!

1-800-366-PART 6 a.m.- 11 p.m. CST,

(1-800-366-7278) 7 daysa weekwww.sears.com/r, artsdirect

To purchase or inquire about a Sears Service Agreement:

1-800-827-66557 a.m. - 5 p.m. CST, Mon. - Sat.

Para pedir serviciode reparacibna domicilio,y paraordenarpiezascon entrega a domicilio:

1-888-SU-HOGAR sM(1-888-784-6427)

Au Canada pour service en fran_:ais:

1-877-LE-FOYER sM(1-877-533-6937)

© Sears, Roei_Jckand Co. ® RegisteredTrademark / _ Trademark ofSears, Roebuckand Co.® Marca Registrada/ TMMarca de FSbricade Sears, Roebuckand Co.

FULL 90 DAY WARRANTY

For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this TVNCR combination,free of charge. For one year from the date of purchase, Sears will supply, at no charge, replacement for de_,ctive parts.

The above warranty coverage applies only to TVNCR combinations which are used for private household purposes.TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN THE TVNCR COMBINATION TO THE NEAREST SEARS SERVICECENTER IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears Roebuck and Co., Dept. 817WA Hoffman Estates, IL 60179For the location of a Sears Service Center In your area : 1-800-488-1222

Printed in Malaysia 0EMN01907T5308 / T7308UJ * * * *



Src22134 Owners Manual

Documents

Transcript of Src22134 Owners Manual