SR'a device replication installation Tariel Kapanadze

Shortly principle.Has a core consisting of a set of ring bistable ferrite magnets. Ferrite is a certain brand, with a rectangular hysteresis loop. At the core is wound three windings. The following option of winding coils.

The first coil is supplied with a high-frequency current arrester is connected to the high voltage transformer (based on FA). Spark in this case creates a so-called noise (chaos in the frequency of the signal), is the basis for the creation of stochastic resonance.On the second coil is supplied sinusoidal signal driving the bistable magnetic field of the magnetic core. This is also a condition for the occurrence of stochastic resonance.With the third winding load is removed by changing the polarity of the ferromagnet.Selected this frequency signal to the second winding, in which the output voltage to the maximum detachable coil. This is the resonant frequency of the bistable core. The generator runs short connecting a 9-volt battery to the capacitor driving a generator of sine and TVS. Made a brief stop off of the exciting coils. Generator SR, a "vacuum triode amplifier" or VTA. A small portion of the output power is fed back to the unit. Winding sinus manages a large flow of energy at the output, similar to electricity! Negative electricity. This energy can be used in devices that convert electricity into light, heat, mechanical work, or anything else that use "normal" electricity. The properties of this energy, similar in appearance to conventional electricity, are unique and very different, so it should be referred to an entirely new kind of energy. Need a thorough and comprehensive study it, to describe its properties as well as scientists have done for conventional electricity. The "secret" of the generator - in a process that prepares the ferrite cores (ferrite bistable), which determines the operating frequency. The same generator with the same success can be "taught" to work at a frequency of 50 Hz or 60 Hz. Preparatory technology is so new that it is

doubtful that anyone can understand how it works. The secret of the process that brings the bistable ferrite core to the appropriate condition. Permanent Ferrite Magnet (grades M0, 12W, M0, 16W, M0, 3W), placed in a special coil through which a current is passed from a pulsed source. Use a capacitor 6500 microfarad 450 volts. Then change the polarity of the pulse, and again provide a current pulse through the coil. The process is repeated many times as long as the structure of the magnet is not a lot of microcracks formed from multiple domain reorientation. In such a "semi-magnet" domains acquire the ability to navigate in a weak directed to "manage" the magnetic field. In fact, this structure does not shift the magnetic domains in the usual sense of the word, and reorient the substance of the larger magnet separated microcracks, ie acoustic domains. It should be noted that the best results prepare the magnetic substance, gives the transmission arc AC, directly through the ferrite. The coil is not required. AC frequency to match the frequency with which will be supplied to the control signal. Specially prepared circular ferrite magnets are used in the "trigger" mode. Bistable state of matter magnet provides a migration path from one side of the field to another, when applying for a control winding of a weak signal from an external oscillator. Moreover, if the material is prepared by repeatedly switching at a frequency of 50 Hz, then its control signal must have the same frequency. Management principle powerful flow through a weak signal is used in transistors. The output signal from the output winding and observed oscilloscope provides an excellent sine wave, the phase of which is not linked to the phase of the local lighting circuit at 50 Hz. Next posts SR'a:

Then just a couple of hours ago had a little experiment: I took two transformer 220 \ 12 and connected in a way that would be the first step down from ~ 220 to ~ 12 V, and the other raised to ~ 12V to 220V AC, two transformers of equal power primerno20Vt. At the output of the second trans-pa (~ 220) a bulb connected to 220V 15W. Then the source of HV (high voltage) started serving weak discharges (DC 2-3kV) on output of the second transformer is connected to the lamp, the same level turned weak, as in the movie Tariel Kapanadze, but noticed an interesting effect: increase the lamp brightness outbreaks. The essence of the experiment was to test the reaction of transformer iron in the discharge of BB (high voltage) momentum. First transformer was needed only for the separation of the food chain. Experience itself, to some extent, pushed me to the next step.

Dear forum members! I want to say that the principle of operation and design of the facility Tariel Kapanadze for me now is no secret. And it's not a hoax. I flashed it a lot of his time, it was more difficult to filter out all the garbage that is poured, such forums where useless information reaches 98%.

I deliberately do not want to post information about the technical and principle of operation of the facility, which would not get the information to the "free riders." But not going to hide and be silent. Those who are "worthy" early go late, come to principle. Under the "dignity", I mean the level of brain activity. I'm willing to help people, to those who really know how to think and understand the essence. I want to keep a "dress code" of access to the information that is under the "dress code" refers to the level of thinking.

I want to say that I do not plan to profit from this knowledge, even thought there was, I'm a man for whom wealth is knowledge, not rotten money. As if this sounds pathetic, but it is. Here is some confusion and misdirection:

1) Parametric resonance. I am always amused that most forum participants actively discussed the parametric resonance of the tank circuit. I belonged to this discussion skeptical, because not everything that teaches physics is fake. My work is directly related to the specialty of technical sciences, such as electrodynamics and TOE. I have an idea of the oscillating circuit, which does not have the CE. Yes, I agree that physics is not perfect, but it is still something teaches. Yes, the device Kapanadze have resonance, but it is not parametric. You think about all kinds of resonances, where they occur. Maybe, just guess what they mean.

2) The arc, more discharge. Many just fanatically collect classic transformers arc dischargers seeking in them the principle of operation of the plant Tariel Kapanadze. This is also a fallacy, and how! Yes, the arc is important to set up, but it plays a very different role, it is not involved in switching. Those who collected these transformers have probably burned a lot of devices and need to understand that they have collected is not something that Kapanadze. In other words, this is just the RF transformer with a high voltage output, this transformer is only good for toys.

3) Many people think that can not output 50Hz from the secondary winding of the transformer installation Tariel Kapanadze and it too has gone terribly wrong! I want to say that the formation of a sine wave power bipolar transistors are used PNP and NPN conductivity, each in its half-wave, and how it works with the transformer, while I will not say.

4) Kacher and other crap, but an interesting toy, but it is just a toy and CE is not there. Many participants in forums trying to stick feedback device Tariel is also incorrect. There is no feedback and no need to reinvent the power line and frame scan their Tariel invented long ago and does not use them.

5) The output transformer unit Tariel hardly a Tesla transformer, but the ordinary man in the street may think so. But the principles are quite different there.

6) The device is not Tariel nanosecond pulses, and WASO has nothing to do with the product.

I would say that 80% of the principle of the installation can be seen in the video 100kW installation, which prevents us to understand? It is our understanding, rather porridge of our knowledge, we are like robots, trying to match our knowledge with what he saw often greatly mistaken. Tariel studied physics at school and, thank God! We often before feel and evaluate the effect of climb for an explanation in the book. Representation of our world are changing very quickly, but for some reason this does not happen with the physics, can plays a bad role "Edison effect"? Take a look at history, most of the great discoveries were made by scientists are not people, and ordinary people who did not have the physics relations.

Did not want anyone to run around, but still, if someone touched it, I apologize.

PS: Forgot to say that one of the elements of the mosaic is in the video madsatbg.

If you only knew how easy it was and the feelings that I feel at this time, simply take your breath away!

Below is a video of my unit. About Theophilus, his movie is just a joke that has nothing to do with reality.

http://www.youtube.com/watch?v=BZUogv5YMXE&feature=player_embedded#t=0s

We can say for 50% transformer tesla. But still, it uses several different principles than the Tesla transformer. Although in one of his patents are mentioned, but not in the patent Tesla transformer. All that said Kapanadze - it's true, but the people, why is distorting the meaning of these words.

Spacing in my system can not be there all the doses and easily managed. Discharge as time and encourages a process definition.

I want to note that the "coils" off the voltage directly, without any converters with 50 Hz. Any connection of the load, even through the arc would not do that, whether there resonance circuit.

In the video, 100kW "main coils" I would call the spools (just like in the patent Tariel) three, one for each phase. As such, there is no beat frequency.

Yes seems to be the law of conservation of energy is all right. Resonance oscillation circuit is not used.

Look at the conditions in which built a working model of the installation, what sort of a nanosecond, which resonances? Everything is literally made "with an ax." Throw your cleverness (oh sorry, education) far away and just think of the process: that encourages the generation of electricity. Suppose there is some stuff that burns, but quickly recovered and again begins to burn, while generating heat. The mistake is that you're trying to associate your skills with the principle of operation of the unit, and if not about the nature of this action in the brain, the brain tries to apply correspondingly existing knowledge. The problem of man is that he is trying to complicate things without thinking about what it is actually elementary and simple.

Any schoolboy knows that the electromagnetic field does work and in the transformer and generator, but there are conditions under which the field can not do the work, then take some action that would make it to work. An example of this magnet has a field, but if you put the coil on it, then we do not get the EMF generation what would happen to move the magnet. Do I have about such basic things to write about?

As for the power frequency in the device Kapanadze is elementary and is less expensive than using an inverter. Especially since the formation of 50Hz is one of the important points, which combine two functions: a sine wave formation (not unipolar pulses, namely the sine wave), the frequency of which can be easily adjusted and more important function, which I will not mention. Naturally present noise introduced by the secondary field, which sometimes affects the readings, some of this noise is eliminated grounding total output transformer.

Potential diagram of the SR, the scheme madsatbg:

In appearance many think that my device is similar to the installation of the first to demonstrate Kapanadze. In fact, they are two different devices and in using different principles. I do bad enough to present the principle of the device of Donald Smith.

I gave a very substantial information indicating that the video 100kW installation shows 80% principle. More detailed information will be, especially about the "barrel", someone sees a barrel, and who is something else.

The device is not in use resonance of the tank circuit, and the load is not part of it.

Frequency 50Hz formed simple manner and to the resonance is irrelevant. Oscillator circuit is not there.

I recommend everybody to forget about the phrase "resonance oscillation circuit." The word "resonance" has a different meaning in the installation.

I want to clarify a few points:

1) Kapanadze in his first video telling the truth, the only thing his ideas and yours may differ, HP (for example): the same response.

2) Kapanadze did well to surge brought on the "street" (outside the box), as if the discharge does not light, then the focus can not be, so it throughout the film worried spark.

3) The apparatus uses two effects, but together they give a result. Doug has a wide range, some of these frequencies are resonant for "ferromagnet", which causes certain social

processes. An electric field. But the field is "dead" and can not perform the work, so connect the second process. In sum, these two processes and are used to obtain the excess energy of the ferromagnet and from the air, this energy is not taken. Threshold is not in tension, and in the ability to create a high-frequency field, which stimulates the ferromagnet.

4) A ferromagnet can be represented as a material, where a lot of small magnets that mean chaos in different directions and can not create the resultant field. The first process allows them to relax, the second turn so that all these small magnets create a result field, and powerful. Simply put, it creates a powerful magnet with the ability to manage it. Well, and then the case of classical physics.

About my video who wants to see him as fraud, he always sees. Such is the nature of man.

When it comes to installing Kapanadze, what I was about to get - valuable knowledge. Again, I want to say how brilliant Tariel to such inclusion coils can only guess genius. I do not claim their device and not going. Perhaps these data useful to me in the future, but not now.

Communication with Melnichenko, is what he is talking about domains. Domains this is the magnets, hitting a resonance with a spark, the domains are ready to perform another function, that is, to turn to where they ordered, and orders them to an alternating magnetic field produced by the current 50 hertz. In principle, the frequency may be, for example, and 400 Hz.

None has suggested that Tesla transformer is installed in Capa's just to get at a minimum cost maximum voltage! So necessary for a certain effect. Since no one TVSe TDKSe or you do not pull as much as needed in order to create the effect of the same 5 kVolt. And see for yourself what the spark necessary to achieve the power of 100 kilowatts. Think and figure out what there napruga that breaks that distance?

Everywhere there is the so-called "modulation" part. The part that gives 50 Hz. Without this part anywhere.

Modulate spark even drumming, but rather talk than give CE."Harm" is not set in the radiation. Such devices will never be used, but you can try. It is still too early to talk about it.

One view:

One of the processes that from the beginning the formation of a spark, it needs a high voltage. Having achieved a spark in the spark we have a wide range of frequencies, remember, SR says generates a spark, and the whole range, we send to the coil, and in the words of one or more frequencies SR have a resonance with the structural material in a ferromagnetic material, and we make it resonate, with a weak electromagnetic field created by the coil through which the entire frequency spectrum of the spark. I call it a matter domain of the descriptions Melnichenko. When the domain is under the influence of the resonance, we can easily turn it in any direction, and this is the second trial, with costs very little current. Turning the domains of the ferromagnet we do usual magnet, in this case, normal ferrite magnet. By changing the direction of the current, we change the polarity of the magnet, here we use to change the polarity of the magnet 50 hertz, and most importantly it should be a sin, because only the alternating magnetic field can create a current in the conductor. Therefore,

we have not just a ferromagnetic core, which operates under normal conditions only at high frequency, and a ferrite magnet, the polarity of which we can change the frequency that we need. For example, if we are at work on the second coil sparks will submit a constant current from a ferromagnet we obtain a permanent magnet, and it will be continued, as we do not turn off the power. I should note that in the simple case we have in mind a simple routine work of the transformer, for what would turn domains, we need to apply a very high current, so as domains resist and want to return to the starting position. RF domain of sparks makes obedient, and he ceases to resist, and does not seek to turn to its original condition, and obediently turned to where we need to, and we are spending a lot less power than under normal conditions of the transformer. Now with the third winding, and a variable to change fields powerful ferrite magnet in this same third winding we have AC, type a simple mechanical oscillator, but there is a change of the magnetic field of the magnets mechanical movement. Turning all domains, we have a magnet with a maximum magnetic field larger than the energy costs for management domains.

Below added two clips, the first gap with an excitation winding and the second is one of its working units:

http://www.youtube.com/watch?v=npAzoeib2X8&feature=player_embedded#t=0s

http://www.youtube.com/watch?v=npAzoeib2X8&feature=player_embedded#t=0s

end of website.