#SPRINGBREAKOUT RABBIT MÁSCARA DE RAIDER ......te recomendamos imprimir en papel fino y pegar las...
Transcript of #SPRINGBREAKOUT RABBIT MÁSCARA DE RAIDER ......te recomendamos imprimir en papel fino y pegar las...
#SPRINGBREAKOUT
RABBITRAIDER MASKMÁSCARA DE CONEJO SAQUEADOR
#SPRINGBREAKOUT2/15
REQUIREDMATERIALS
A SPECIAL NOTEABOUT PRINTING
The weight [GSM] of the cardstock is our recommendation, but any other thickness will work too.
- Printer- A4 or US letter size printer paper- Spray adhesive or a glue stick- Scissors - Glue (or Clear tape)- Folding bone or thick sewing needle - Ruler- Elastic band or string
9 sheets of card stock- 2 sheets light blue - (300gsm/110lb cover)- 3 sheets pink - (300gsm/110lb cover)- 2 sheets white - (300gsm/110lb cover)- 1 sheet dark grey or paper - (160gsm/60lb)- 1 sheet yellow or paper - (160gsm/60lb)
This mask is designed to be printed on US Letter paper (8 1/2" x 11") or A4 paper (210mm x 297mm).
Make sure that the "print to scale" option is blank/not checked on your printer settings to ensure that the pages print at the intended size.
You can check the scale by measuring the printed line on the first pattern page with a ruler.
DIFFICULTY LEVEL: MEDIUMTIME REQUIRED: 2 - 2.5 HOURS
MATERIALES NECESARIOS
AVISO ESPECIAL PARA IMPRIMIR
El peso [g/m²] de la cartulina es nuestra recomendación, pero también pueden servir otros tipos de grosor.
- Impresora- Papel para impresora de tamaño A4 o carta
(EE. UU.)- Adhesivo en spray o pegamento en barra- Tijeras- Pegamento (o cinta transparente)- Plegadora de papel o aguja de coser gruesa- Regla- Elástico o tira
9 hojas de cartulina- 2 hojas azul claro - (300 g/m²/110 lb
para la cubierta)- 3 hojas rosadas - (300 g/m²/110 lb
para la cubierta)- 2 hojas blancas - (300 g/m²/110 lb
para la cubierta)- 1 hoja gris oscuro o papel - (160 g/m²/60 lb)- 1 hoja amarilla o papel - (160 g/m²/60 lb)
Esta máscara se diseñó para imprimirse sobre un papel de tamaño carta estadoun-idense (215,9 mm x 279,4 mm) o papel A4 (210 mm x 297 mm).
Asegúrate de que la opción "imprimir a escala" no esté seleccionada o esté vacía en los ajustes de impresión para que las páginas se impriman al tamaño correcto.
Puedes comprobar la escala si mides la línea impresa del primer patrón con una regla.
NIVEL DE DIFICULTAD: MEDIANOTIEMPO REQUERIDO: ENTRE 2 Y 2.5 HORAS
4
5
4
5
#SPRINGBREAKOUT3/15
INSTRUCTIONS FORPRINTING AND FOLDING
Mountain fold line
Valley fold line
If your printer can handle thicker paper, print directly on your cardstock and skip step 1. When using thicker or black cardstock,
we recommend printing on thin paper and adhering the mask pieces to cardstock. Both methods will result in the printed lines and pattern
guide numbers being hidden on the inside of the finished mask.
(1) Print your mask pieces on printer paper. Cut the pieces out roughly and glue them to the back of your cardstock with a spray adhesive or a glue stick.
(2) Cut out the pattern pieces along the solid cutting lines.
(4) Refer to the diagram below and fold along the creases, either bringing the two edges towards you (Valley Fold) for the plain dashed line folds or away from you (Mountain Fold) for the dot/dashed line folds.
Note: the dashed lines are folding lines, make sure not to cut them!
(3) Using a folding bone or a thick sewing needle and a ruler, score along the folding lines.
C1 C1
C1
wh
ite
whi
te
white
INSTRUCCIONES PARA IMPRIMIR Y DOBLAR
Línea de pliegue en montaña
Línea de pliegue en valle
Si tu impresora puede imprimir sobre papel más grueso, imprímelo directamente en la cartulina y omite el paso 1. Si usas cartulina gruesa o negra, te recomendamos imprimir en papel fino y pegar las partes de la máscara a la cartulina. Con ambos métodos, las líneas impresas y los números de guía del
patrón quedarán ocultos dentro de la máscara.
(1) Imprime las partes en papel de impresora. Córtalas y pégalas en la parte de atrás de la cartulina con adhesivo en spray o pegamento en barra.
(2) Sigue las líneas continuas para cortar las partes del patrón.
(4) Consulta el siguiente diagrama y dobla el papel por los pliegues, ya sea llevando los dos extremos del papel hacia ti (pliegue en valle), si las líneas están formadas por rayas simples, o hacia el lado contrario (pliegue en montaña), si las líneas están formadas por rayas y puntos.
Nota: las líneas discontinuas indican dónde debes doblar el papel, ¡así que no las cortes!
(3) Marca las líneas de pliegue usando una plegadora de papel o una aguja de coser gruesa y una regla.
C1 C1
C1
Blanco
Blan
co
Blanco
5
3131
27
297
KJ
50 51
51
7 3
14
1413
A1 A2
B
#SPRINGBREAKOUT4/15
MASK ASSEMBLY INSTRUCTIONS
Lay out the pieces
Find matching pieces
Each piece is labelled. Place the pieces in alphabetical order. Note: symmetrical pieces have the same letter but a different number. (A1 < symmetrical > A2).
Place a piece of tape on the outside of the pattern covering the joint where the two edges meet. Tape all pieces together.
A thin strip is all you need on the glue tab. Press the glue tab firmly to its matching number. Continue this process for each piece in alphabetical order. The glue tab and number should not be visible from the outside of the mask.
Now let your creativity flow. You can decorate and color your mask any way you like.
Pro: easy and fast!Con: tape is visible from the outside
Pro: invisible!Con: time consuming
Start with piece A and piece B. Each has small numbers along its edges. A number from piece A will be an exact match with a number from piece B. Locate the glue tab below one of the matching numbers.
We recommend using one of the following methods for attaching the mask pieces together.
Option 1 / Easy clear adhesive tape
Option 2 / Advanced glue
Glue tab
Inside view
Glue
Outside view
Done!
INSTRUCCIONES PARA ARMAR LA MÁSCARA
Ordena las partes
Busca las partes que coincidan
Todas las partes están marcadas. Colócalas en orden alfabético. Nota: las partes simétricas tienen la misma letra pero un número diferente. (A1 < simétrica > A2).
Solo necesitarás aplicar una fina capa en la pestaña para pegar. Presiona la pestaña firmemente con el número correspondiente. Continúa con este proceso en todas las partes por orden alfabético. La pestaña para pegar y el número no deberían ser visibles desde la parte exterior de la máscara.
Coloca un trozo de cinta por fuera del patrón que cubre la unión de dos bordes y une las partes.
Ahora, deja que fluya tu creatividad. Puedes decorar y pintar la máscara como quieras.
Ventajas: ¡es fácil y rápido!Inconvenientes: la cinta se ve por fuera
Ventajas: ¡invisible!Inconvenientes: tarda mucho tiempo
Comienza con las partes A y B. Cada una tiene pequeños números en los bordes. Los números de la parte A coincidirán con los de la parte B. Pon la pestaña para pegar debajo de la que tenga el número correspondiente.
Recomendamos usar uno de los sigui-entes métodos para pegar las partes de la máscara.
Opción 1 / Cinta adhesiva transparente
Opción 2 / Pegamento
Pestaña para pegar
Vista interior
Pegamento
Vista exterior
¡Todo listo!
2224
13
2534
14
23
45
27
36
11
26
35
20
28
12
29
21
#SPRINGBREAKOUT5/15
PATTERN GUIDE A1.
Before assembling Use a needle to pin through the center of the circles from the back TO MARK WHERE THE MASK HOLES WILL BE ATTACHED.
Start with pattern piece A and continue in alphabetical order.
A
B
C
D1
D2
G1 + H1 G2 + H2
E
F
GUÍA DEL PATRÓN1.
Antes de armar: usa una aguja para atravesar el centro de los círculos desde la parte de atrás PARA MARCAR DÓNDE IRÁN LOS AGUJEROS DE LA MÁSCARA.
Comienza con la parte A y sigue en orden alfabético.
A
B
C
D1
D2
G1 + H1 G2 + H2
E
F
#SPRINGBREAKOUT6/15
PATTERN GUIDE B
Glue all colored elements like 3d stickers to the mask!Use thinner cardstock or paper for these elements!
1. Attach nose and mask
band rectangle
3. Attach whiskers and teeth
4. Done
2. Attach all the dots/holes.
The pinhole marks indicate the center of each dot.
Option 1Cut out
Option 2Attach dots
GUÍA DEL PATRÓN B
¡Pega todos los elementos de color como las calcomanías 3D a la máscara!¡Usa cartulina fina o papel para estos elementos!
1.Adhiere la nariz y la banda rectangular de la máscara.
3.Adhiere los bigotes y
los dientes.
4.¡Listo!
2.Adhiere todos los puntos/agujeros.
Las marcas de los agujeros indican el centro de cada punto.
Opción 1Cortar
Opción 2Pegar puntos
31
2811
78
910
15
13
1417
25
16
25
12
45
18
23
19 24
22
20
20
21
46
10
27
28
39
26
44
9
31
30
38
29
43
#SPRINGBREAKOUT7/15
4” (100mm)
Light Blue
Glue Flaps
A
4” (100mm)
Azul claro
Pestaña para pegar
A
24
17
32
42
23
1
43
21
13
2
44
12
45
16
46
22
#SPRINGBREAKOUT8/15
CLi
ght
blue
CA
zul c
laro
32
1815
3435
33
7
33
8
1914
3435
#SPRINGBREAKOUT9/15
BWhite
BBlanco
3940
26
3
3841
29
4
#SPRINGBREAKOUT10/15
Punch holes for elastic band or string
Pink Pink
D2 D1
Haz un agujero para meter un elástico o una tira.
Rosado Rosado
D2 D1
1
4
3
2
56
5
3736 6
42
41
3027
40
11
#SPRINGBREAKOUT11/15
E FPi
nkPinkE F
Rosa
doRosado
3736
#SPRINGBREAKOUT12/15
G2 G1
Pink
This sidefaces the front
Pink
This side
faces the front
G2 G1
Rosado
Este lado es la parte de adelante
Rosado
Este lado es la
parte de adelante
36 36
#SPRINGBREAKOUT13/15
White White
This sidefaces the Back
glue onG2
This sidefaces the Back
glue onG1
H1 H2
Blanco Blanco
Este lado es la parte de atrás
Pégalo a la parte G2
Este lado es la parte de atrás
Pégalo a la parte G1
H1 H2
#SPRINGBREAKOUT14/15
Face option 1print on thinner cardstock
160 GSM/60 lb
Score all the folding lines before you cut out!color these elements yourself!
Nosepink
Mask Holesdark grey
Whiskersyellow
Teethwhite
Mask Bandrectangledark Grey
Opción de cara 1Imprímelo en cartulina fina
160 g/m²/60 lb
¡Marca todas las líneas de pliegue antes de cortar!¡Colorea estos elementos!
NarizRosado
Agujeros de la máscara
gris oscuro
BigotesAmarillo
DientesBlanco
Banda rectangular de la
máscaragris oscuro
#SPRINGBREAKOUT15/15
Face option 2print on thinner cardstock
160 GSM/60 lb
Score all the folding lines before you cut out!Fold and glue to face!
Nose
MaskHoles
Whiskers
Teeth Mask Bandrectangle
Opción de cara 2Imprímelo en cartulina fina
160 g/m²/60 lb
¡Marca todas las líneas de pliegue antes de cortar!¡Dobla y pega las partes en la cara!
Nariz
Agujeros de la máscara
Bigotes
Dientes Banda rectangular de la
máscara