Spring Issue 2012 web ver -...

Spring Issue 2012

A Central U.S. Marketing Publication

Visit our NEW mobile friendly website

Panel Bonding

Backed by a “lifetime structural and corrosion warranty”, Panel 60 & 90 bonding adhesive’s are used for bare metal, aluminum, e-coat, SMC and �berglass on quarter panels, roof panels, rear body panels and door skins. Panel adhesives may also be spot-welded wet and are sandable to a feather edge.

#8007 Panel 60 220ml / cartridgeWork Time 60 minutesHandling Strength 4 hours at room temperature or10-15 minutes at 180˚FPaint Time 8 hours at room temperature or25-30 minutes at 180˚FMSRP $37.50

Our Panel 60 & 90 bonding adhesive’s are part of a family of versatile, fast-acting, smooth-�nishing PLIOGRIP products.

Speci�cally engineered for the body shop, PLIOGRIP by Valvoline products provide better workability,reduced repair times and superior structural strength.

#8051 Panel 90 220ml / CartridgeWork Time 90 minutesHandling Strength 4 hours at room temperature or10-15 minutes at 180˚FPaint Time 8 hours at room temperature or25-30 minutes at 180˚FMSRP $37.50

STRUCTURAL ADHESIVE

GM-APPROVED STRUCTURAL ADHESIVE REPAIR SPECIFIED IN THE CORVETTE COLLISION REPAIR MANUAL

A Structural Adhesive designed to bond SMC and Plastic Panels.

Bonds SMC, plastics, and �berglass panels. MEETS GM AFTERMARKET SMC PANEL BONDING SPEC. #GM6448G

Working time is 30 minutes.Black color.Bond Strength: 3700 - 4000 psi

Part No. 7770B 220ml Cartridge

#8049 Plastic Repair 1 220ml / cartridgeWork Time 1 minuteSand Time 10 minutes at room temperature or3-5 minutes at 180˚FPaint Time 15 minutesMSRP $37.50

Our easy-to-use Plastic Repair system can repair bumpers, bumper tabs, plastic body panels, interior tabs, ground e�ects, moldings and claddings. PLIOGRIP Plastic Repair adhesives have a two-year shelf life and meet OEM standards for repair. Speci�cally engineered for the body shop, PLIOGRIP products provide better workability, easy sanding, reduced repair times, with superior structural strength and a Lifetime Warranty. One Repair Product - 3 work times available for more versatility.

Contact us for product demonstration or an Authorized Distributor near you 708-479-3808.

Plastic Repair Made Easy!

Repair Rips, Tears, Tabs, and Bond Plasic Panelswith only 1 Repair Product.

PLASTIC REPAIR• Meets Ford WSB-M11P27-B, General Motors GM6448G, and

Chrysler MS-CC258 and MS-CC631 standards

• High-strength structural urethane

Helps Eliminate… Die Back… Wrinkling… Poor Durability… Clouding… Orange Peel… Blushing…Fish Eyes…

New Waterborne Paint TechnologyRequires Clean, Dry Contaminant-Free Air!

• Consistent -40°F Dew Point & 0% CAH

• No desiccant maintenance for 3 years

• Pre-filter removes water, dirt & oil

(removes all oil mist)

• Final filter removes desiccant dust

• One gun system (PERF-25) &

Two gun system (PERF-50)

• The best system for shops spraying waterborne finishes

RTi’s Advanced Desiccant System For Top of theLine Finishes Requiring Perfect Air

We are now o�ering high quality,

lightweight aluminum piping and accessories to

compliment our PerfecT Air™ line!

Easy to install, easy to change, no welding needed, this system

helps reduce installation time and labor costs.

A wide variety of

accessories are available,

making installation a breeze:

Stock in ¼” - 1 ½”, other

sizes are available.

Call for a free quote today!

PERF-75HD RegenerativeDesiccant Dryer System

• Regenerative Desiccant Dryer• Mainline or multiple booth use• Turnkey system; No assembly required!• 15 month warranty• Provides faster cure times and increasedproductivity• Handles flow from 30 HP compressors• -40°F dew point & 0% CAH through out shop• Complete with 0.01 micron pre & final filter

• Dimensions (L x W x H): 34” x 24” x 76”• Inlet flow capacity (@100 psig):120 scfm• Inlet/Outlet: 1” NPT• Weight: 475 lbs/215.5 kg• Max working pressure: 150 psig• Min working pressure: 60 psig• Max inlet temperature: 120°F• Max ambient temperature: 120°F• 115V/1PH, 6 foot power cord• Uses 8 scfm purge air

PerfectAir For The Entire Shop!

NOW

AVAILABLE!NOW

AVAILABLE!

Modular Blue Aluminum Piping

The Next Step to PerfecT AIR

PerfectAir For The Entire Shop!

Contact us for a Authorized Distributor near you 708-479-3808.

visit us @ www.cusm1.com

Dominion Sure Seal's new Spray in Bedliner and Multi Purpose Coating "Shake & Shoot". Easy to use, simply pour Part B into Part A to the �ll line, shake for 2 minutes and "shoot". This multi purpose coating can be sprayed using a Schutz Gun, or apply using abrush or roller. Apply on virtually any surface to provide a tough, durable �nish. This urethane bedliner is fast drying with excellent UV protection. CAN BE APPLIED OVER BARE METAL.

Part No. 1216 Shake & Shoot Kit3.32L (.877 Gal.) KitColor: Black

SHAKE & SHOOT Spray in BedlinerSHAKE & SHOOT Spray in BedlinerFeatured

Product!Featured

Product!

$115.00 / kitMSRP $131.64 / kit

*Also available: Tintable kits, and single can kits.*Also available: Tintable kits, and single can kits.

Nylon Cup BrushOur Nylon Cup Brush for is use prior to spraying ANY type of sprayable bedliner, it will cut your sanding preparation time by up to 50%. One brush can last for up to 25 trucks, fits on most 5/8" variable speed buffers/polishers. Save on time and labor.

Part No. 208 Nylon Cup Brush 6"

MSRP $41.68

Crystal Clear 2k Chip GuardNEW IMPROVED EASY BUFF FORMULA!

Crystal Clear 2K Chip Protection is the latest in the line of quality clearcoats offered by

the Dominion Sure Seal Group. Crystal Clear 2k Chip Guard is a high solids quality clearcoat that

protects OEM and aftermarket �nishes from rocks, gravel and other road debris. Especially suited

for front bumpers and leading edges that are subjected to flying rocks and other road debris; but

works well wherever any clearcoat finish is used. Extremly flexible and durable with excellent

UV Protection: Passed rigorous UV testing by the Xenon weatherometer.

Kit contains 16 oz part A & 16 oz part B.

Part No. 101004 (Quart kit)

MSRP $105.34 / kit

Best

Value!Best

Value!

Low VOCRubberized Undercoating

FAST DRY rubberized undercoatingcan be painted in 20 - 30 minutes.Permanently flexible, resistant to stones, gravel, and road salt. Penetrates and adheres to rusted surfaces, dries to a textured finish.

Part No. 240041 AerosolMSRP $11.46 / can

FAST DRY rubberized undercoatingcan be painted in 20 - 30 minutes.Permanently flexible, resistant to stones, gravel, and road salt. Penatrates and adheres to rusted sufaces, dries to a textured finish.

Part No. 100400 Quart Shutz CanMSRP $16.00 / can

Fast DryRubberized Undercoating


ANEST IWATA Group

HVLP

The all new Impact spray gun from Air Gunsa is ideal for all kinds of industrial applications with all internal

wet parts made from stainless steel, this gun is great for both solvent and water based materials.

New high atomizing Anest Iwata air cap gives a longer, flatter fan pattern ideal for all applications.

➤ New responsive trigger action ➤ Light weight (Integrated air valve mechanism

➤ Consistent, homogeneous atomisation ➤ Built in air flow control valve (standard)

➤ Low air usage ➤ Very large and stable fan pattern (300mm)

due to the new design air cap

“A Great Choice”For Waterborne & Solvent

Based Paint Systems!

Optional Air Control Valve # 8130BIncludes Standard Plastic Cup #9290

HTE-S HVLP 1 Air Cap Test Gauge Part #9284 HTE-S HVLP 2 Air Cap Test Gauge Part #9285

ModelNozzle

mm (inch) Air Cap Part Number

Inlet Pressure PSI

Air Consumption

CFM

Pattern Width mm (inches)

Paint Output ml/min

AZ3 HVLP-S 13 1.3 (0.051) HTE-S HVLP 1 9270 28 10.83 280 (11.02) 144






LPH-400 LV Spray Gun

High performance HVLP center post gravity feed spray gun with low air consumption and superior atomization.

Utilizing our LV technology and our tulip inspired spray pattern the LPH400LV has a wide variety of uses for many applications. Pattern width ranges from 10.2" to 12.6" depending on the nozzle size.

Complete line of the �nest Airbrushes,

solvent resistant stencils, instructional

DVD’s and accessories.

If you can’t �nd what your looking

for call us 708-479-3808.

MSRP$349.00

Gun Only MSRP$578.00 Gun Only

$559.00


Advanced Multipurpose Wipes

192128ASoft, low lint material• Strong enough to wipe down oil, grease and solvents• Thick, cloth-like construction is highly absorbent 2 Rolls / Case ..... 600 Wipers / Case

Precision Cleaning wiper is strong, durable and reusable. This soft, premium-quality wiper is perfect for surface preparation and cleaning. One of our strongest wipers and they're virtually lint free. This product contains 100% synthetic and virgin fibers.

Dispensers for folded wipers (W4)

• Easy cleaning & maintenance• Protects product

• One-at-a-time dispensing for controlled consumption

• Lockable

SKU Description System Color Dispenser Size H x W x D (Inches)

654028A Top-Pak Dispenser W4 Red/Smoke 15.51 x 16.81 x 8.11 (39.40 x 42.70 x 20.60 cm)

530178A Tork Premium Multipurpose Cloth, 530, Top Pak W4 White 1 16.85 x 15.2 (42.80 x 38.60 cm) 100

Description System Color/Pattern Ply Sheet Size L x W (Inches) Wipers/Pack

520378 Tork Premium Multipurpose Cloth, 520, Top-Pak W4 Grey 1 15 x 16.5 (38.10 x 41.91 cm) 140

440278A Tork Advanced Wiper, 440, Top Pak W4 Blue 1 12.81 x 16.4 (32.54 x 41.65 cm) 90

Performance

192475 - 100 / Box

19478 - 250 / Box

Why Use Tork Performance Products!Why Use Tork Performance Products!

Color: White • Wipers/Roll: 200 • Soft, low lint material

4501374-Ply Tork Advanced 440

Center Pull Wiper - BlueFor maximum absorbency. Absorbs oil, grease, hydraulic fluids, & solvents for fast clean-up. Dual-textured sides for flexible, multipurpose cleaning & wiping.4-Ply 100% cellulose absorbs more, so you use less

132441 - 2/375 SHT TORK 440 MAXI ROLL/CS

ShopMax™ Wipers

Premium Specialist Cloth


BENEFITS:

• Cleaning with warm water speeds cleaning of waterborne spray guns and allows for easier removal of hardened paint.

• For use with Uni-ram’s waterborne spray gun cleaners - model UM120W, UG5000W, UA400W, UG7500W and UG7500WF

MSRP $995.00

WATER HEATERFOR WATERBORNE SPRAYGUN CLEANER

WALL MOUNT SPRAY GUN CLEANER WITH WASTEWATER TREATMENT BY FLOCCULATION

FEATURES:• Waste water treatment system built in.• Cleaning tools - nozzle for cleaning paint passage, pad to clean cap, flow-through brush to clean exterior of gun and blow gun to dry paint passage and exterior.• Air supply whip line included.• Non-corrosive stainless steel cleaning tank.• Powered by Uni-ram's dual diaphragm pump.

UM80WF

UM120WMANUAL SPRAY GUN CLEANER

WITH WASTE WATER TREATMENT BY FLOCCULATION

EQUIPPED WITH CLEANING TOOLS TO EFFECTIVELY CLEAN PAINT FROM THE SPRAY GUN

• Wash gun delivers high pressure water to clean the paint channel.• Flow-through brush removes paint from the outside of the gun.• Air gun dries the spray gun and a spray out veri�es a clean paint channel.

UWHLEX

MSRP $1260.00

MSRP $1995.00

COAG-KLEEN FPFLOCCULENT GRANULES FORWATERBORNE PAINT

COAG-KLEEN FP, flocculent, removes the absorbed waste paint solidsfrom water that has been used to clean spray guns. The clean recoveredwater can be reused several times before disposal. The separated paintwaste, when dry, is then disposed of in accordance with local regulations

102-8300 COAG-KLEEN Flocculent Granules (2 kg.) $60.00

AQUA-KLEEN PGCCONCENTRATED CLEANER FOR WATERBORNEPAINT

AQUA-KLEEN PGC is used with a manual or automaticspray gun cleaner to e�ectively wash waterborne paintfrom spray guns.Mix 1 container of AQUA-KLEEN PGC concentrate with 5gal (20 L) of water

102-8200 AQUA-KLEEN Spray Gun Cleaner Concentrate $55.00

102-8125 Primary Mesh Filter bag $19.00102-8126 Secondary Felt Filter bag $18.00

Electric Cord

Aluminum Pail

SelectorKnob

$1195.00

$1895.00

$950.00


UM80SWALL MOUNT SOLVENT SPRAY GUN CLEANER

FOR MANUAL CLEANING

MSRP $1040.00

CLEANING BECOMES FAST AND EASY» Solvent under high pressure flows, at the press of a button, to thoroughly clean the paint passage in less than 30 seconds.» The outside of the gun can be cleaned with a Flow- through Brush and dried with a Blow Gun (both included).» Locating the compact UM80S inside the spray booth saves time because the gun can remain connected to the air line and the painter can remain in the booth; the paint channel is flushed while the paint is still "wet".» For use with solvent based paints only. For use in the spray booth or in the general shop area. » Ideal for cleaning PPS and other disposable cup adapters.

URS500 Economy, 120V Solvent Recycler• Tank Capacity: 5.0 US Gal (20 liters) • Speed: 5.0 US Gal in about 4 hours • Solvent Transfer: Manual • Air Pressure: Not applicable • Power Supply: 110/120V, 1500W, 13.3A • Heater: 1500W • Display: LEDs indicate power on, heat on and 6 temperature set points

Uni-ram recyclers feature fast cook times and easyto handle waste residue. Unique hardened aluminumtank construction provides excellent heat transfer.

Cover

Lid

Distillation Tank

Liner Bag

SPRAY GUN CLEANINGTOOL KIT

18 piece spray guncleaning kitMSRP $20.90

# KIT-GCTOOLS

URS500Economy 120v Solvent Recycler

$975.00

MSRP $4095.00

$3899.00


• Cleans 1 Spray Gun and Cup using Wash Timer • 9 Swirl Action Jets • Tank Size 12.5 x 12 x 13.5 (WDH”)

MSRP $765.00

UG110AUTOMATIC WASH

$725.00

• Sharp color separation on curves or straight lines

• Clean removal; residue free

• UV resistant up to three days

• Resists bleed through

AM1855 ¾” EquivalentAM2455 1” EquivalentAM3655 1½” EquivalentAM4855 2” Equivalent

Contact your local American Tape Distributor For Sample & Great Pricing!

American Tape’s Anchor Brand Hand Mask is a pre-folded high density polyethylene masking �lm designed for multiple transportation applications. The thick and durable 12 micron �lm is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying �lm from sticking.

• Film and tape are applied simultaneously• Clings to surface preventing overspray• Designed to work with competitive hand dispensers• Compact size• Competitive advantage over other films and kraft paper

Call your local Professional Paint Jobber.

AVAILABLE SIZES in four unfolding lengths

24” (609mm) x 180 ft (54.8m) HMF…24

36” (914mm) x 90 ft (27.4m) HMF…36

48” (1219mm) x 180 ft (54.8m) HMF…48

72” (1823mm) x 90 ft (27.4m) HMF…72

99” (2514mm) x 90 ft (27.4m) HMF…99

Best

Value


500 ProFinisher™ 3/32" Offset Palm Sander 6" $175.00510 ProFinisher™ 3/32" Offset Self-Generating 6" $210.00520 ProFinisher™ 3/32" Offset Vacuum-Assist 6" $205.00600 ProFinisher™ 3/16" Offset Palm Sander 6" $175.00610 ProFinisher™ 3/16" Offset Self-Generating 6" $210.00620 ProFinisher™ 3/16" Offset Vacuum-Assist 6" $205.00

ÄMADE IN AMERICA ÄAMERICAN PARTS

ÄAMERICAN INNOVATION ÄAMERICAN QUALITY

ÄAT AN AFFORDABLE PRICE

Scan to view

Hutchins Video

ORBITAL ACTION. Versatile. Adapts to every Surface Preparation need. Heavy duty to feather edging. Powerful Air-Efficient Motorwith 5-point Suspension guarantees 44 square inches of uniform, full contact sanding. Low maintenance, high productivity.Pad size 2 3⁄4” x 16”.

Model 3800

MSRP $345.27$328.00

MSRP $397.95

Model 2000STRAIGHTLINE, RECIPROCAL ACTION The only 2-Cylinder, common piston Straightline with vertically- engaged, twin drive gears. Lack of "rolling gears" common to all other straightlines eliminates "humping and jumping" at the end of each reciprocal stroke. Two in-line Cylinders, micro-honed to eliminate cylinder-wall drag, power an oversized high-alloy piston. Double rack and pinion gear assemblies give twice normal gear contact for maximum balance and thrust. These precision assembled components make the HUSTLER a superb all-purpose straightline with synchronized strokes so smooth and powerful it gets lighter with use.

$375.00


Includes:• Internal feedback circuit increases

torque when downward pressure is applied

• 1800opm – 6800opm, the most versatile speed range in it’s class

• Easy side-port access for quick brush changes

• W68DA Soft Buff 2.0 DA Backing Plate

• Embroidered canvas bag

ModelG110v2

MSRP

$185.00

PROFESSIONALSYNTHETIC SEALANT 2.0

• Synthetic polymer formulation provides

technologically advanced paint care and protection

• Synthetic polymers provide deeper, darker,

more reflective paint finish

• Eliminates fine scratches and swirls, creating

a flawless finish

• Glides on easily, with a smooth, resistance-free

wipe-off

PROFESSIONALFINAL INSPECTION

Fast, mist-on, wipe o� to remove fresh contaminants and maintain a

"Show Car Shine"...anywhere, anytime

• Fast, mist-on, wipe-off for a “Show Car Shine”• Use to evaluate paint repairs, or to look for surface defects• Ideal for use before customer delivery• Spray and wipe for quick clean-up of compound polish and residue• Preferred lubricant for Meguiar’s Detailing Clay C2000 & C2100• Use to prime dry buffing and foam pads

M2116 – 16 oz $23.70M2164 – ½ gallon $53.28

M3416 - 16 oz

$8.34

M3401 - gallon

$30.54

Starter Kit #DMCKIT6 (includes)–D30016 – DA Micro�ber Correction Compound – 16 oz–D30116 – DA Microfiber Finishing Wax – 16 oz–DMC6 – DA Micro�ber Cutting Disc – 6” (2 pack)–DMF6 - DA Microfiber Finishing Wax – 6” (2 pack)–S6BP – 6” DA Pad–MGAPRON – Meguiar’s Black Apron

D102 Carpet & Upolstery Cleaner• Removes tough stains quickly• Easy upside-down spray application of foam for high-speed cleaning• Dries fast without residue

D10219 - Aerosol $5.36

D163 Tire & Trim Gel

• Provides deep satin black look• Thick consistency, no runs, drips or overspray• Long lasting, non-streaking formula• VOC compliant

D16332 - 32 oz. $26.98


Fast and Easy Corrosion Protection

A proper repair includes replacement of the vehicle's corrosion protection. Is your shop providing this? For those that answer “no,” it's not too difficult to identify the reasons. Time-consuming application; tedious cleanup; specialized equipment that's not user-friendly. Now there’s a better way.

The new 10010 Like90 Corrosion Inhibiting Compounds (CIC) Kit is a “game-changing” approach to restoring corrosion protection in damaged vehicles. Packaged in VOC-compliant aerosol cans, each component in the system provides superior performance compared to traditional alternatives:

Kit Contains 1 each of the following: 10011 CIC Weld Thru Aerosol 10012 CIC Dry Film Aerosol 10025 CIC Wet Film Aerosol 10014 CIC Remover Aerosol 10015 Flex Wand 10016 CIC Aluminum Aerosol Caddy

Part No. 10010 Kit

Like90 TurboPad Single-use, pre-saturated scuff pad for bumpers and other plastic parts. The Like90 Turbo Pad eliminates one of the biggest headachesin the shop: paint failures on new, unprimed plastic bumpers. The Turbo Pad is a custom scuff pad specifically designed for abrading plastic. It is pre-saturated with Like90's patented plastic preparation gel for maximum efficiency and ease of use. The result: better paint adhesion.

• Cleans, degreases, and abrades. No one likes prepping bumpers. But now the Turbo Pad's 3-in-1 action makes the process fast and efficient. The patented prep gel embedded in the pad eliminates contamination on the substrate, abrades comprehensively, and leaves the part ready for primer. And unlike other products, it leaves no residue, a major cause of paint failures. • Single-use design: The Like90 Turbo Pad is designed to ensure a consistent process, taking the guesswork out of bumper prep. The single-use packaging allows it to be easily tracked and charged to the repair for reimbursement. Check with the covering insurance company for details.

• Zero VOC. The Like90 Turbo Pad has no volatile organic compounds and, by eliminating the degreasing step in the bumper prep, reduces the total VOC output in the shop. Part No. 10023 12 / cs

Like90 Turbo Pad

Contact us for a Distributor near you 708-479-3808.

MSRP$4.79 each

BestValue!

BestValue!

Like90 Scuff Gel Like90 Scuff Gel for Paint and Plastic cleans, abrades and degreases all in one step. Use this high-performance gel with a gold or white scuff pad when prepping plastic parts or blend areas. This versatile product meets the toughest VOC standards (< 25 g/l) and can be used a number of ways in the shop:

• Plastic bumper prep: A simplified process with better, faster results. Eliminates the need to pre-bake new unprimed plastic bumpers and other time-consuming steps. Increases paint adhesion while reducing the amount of labor required to prepare plastic for paint.

• Wet-scuffing panels for water-borne blends: Faster, more comprehensive abrasion without any blend scratches. Cleans and degreases while making your scuff pad more effective and efficient. Rinses off completely without leaving any residue to compromise paint adhesion.

• Degreasing when dry-sanding blends. Use before or after dry sanding of blend areas for superior degreasing performance compared to other low-VOC degreasing option

Part No. 10021 700 Gram Tube 6 / cs $11.95 / tubePart No. 10022 176 oz. 4 / cs $87.95 ( 0.50 per oz. )

Like90 Scu� Gel

NEWNEW


Central U.S. Marketing10614 Celtic Ct.Mokena, IL 60448708-479-3808visit us @ www.cusm1.com

Prices subject to change without notice, not responsible for typographical errors in pricing or product description.Call Central U.S. Marketing your factory representative for product demonstration 708-479-3808, or your closest jobber .

KEEP THEM CLEAN &

CONTAMINATE FREE!» A revolutionary total system, providing a clean-room manufactured strainer, dust-free storage and “no touch” tab dispensing to ensure each strainer is 100% contamination-free.» Developed to provide the critical increased level of purity required for preparing today’s “high-tech” basecoat clearcoat paint systems.» Endorsed by leading Automotive Paint Manufactures.

Spring Issue 2012 web ver -...

Documents

Transcript of Spring Issue 2012 web ver -...