Spray tips, hoses, systems and accessories - Exitflex Surface Treatment Accessories... · section...

Spray tips, hoses, systems and accessories

replace

1

Product Range Index

Airless and AAA Tips plus accessories

Section one-page 4

Air fed breathing and control equipment

Section four-page 55

Airless and AAA spray guns

Section nine-page 103Agitators and mixing tanks

Section seven-page 89

Fluid control equipment

Section six-page 79

Suction feed tubes and systems

Section ten-page 117

Fluid filter housings and screens

Section five-page 65

Pressure feed equipment andair spray extensions

Section eight-page 97

High pressure thermoplastichoses and accessories

Section two-page 23

Colour change equipment Section eleven-page 127

Low pressure air and fluidhoses and accessories

Section three-page 41

Blast Hoses andmiscellaneous items

Section twelve-page 135

contact technical sales on t +44 (0)1202 478334 f: +44 (0)1202 488110

e [email protected]

www.exitflex.co.ukExitflex(UK) Ltd 5 Airfield Road Airfield Industrial Estate

Christchurch Dorset BH23 3TG United Kingdom

Exitflex (UK) Ltd was established in 1984 and became the first majorEuropean branch in 1989 when premises were acquired in Christchurch.

Based in Gland Switzerland Exitflex SA the company headquarters, grewquickly through the sale and manufacture of tungsten carbide spray tips

and high pressure thermoplastic paint spray hoses and accessories. Thesewere marketed primarily to the surface treatment industry.

Demand around the world led to the creation of additional distributioncompanies for Exitflex SA as far afield as Australia, Germany, Poland,

Sweden, Singapore and the USA.EXITFLEX manufactures hoses for OEM equipment producers and the

large after market business sectors.

Exitflex(UK) Ltd provide their customers with support and service from thecomprehensive stockholding of hoses and components in their

Christchurch business units.

The full range of EXITFLEX products shown in this catalogue is availablethrough our extensive network of distributors.

Please browse this catalogue and our website. If you need any help oradvice in choosing the right product for your application please call

Exitflex UK Ltd – we look forward to being of service to you.

Spray tips, hoses, systems and accessoriesTop quality - Best results

we manufacture we stock we deliver

2

This catalogue is arranged in twelvecolour coded sections. The codingcolours are to be found on the top andbottom outside corners of the pages.

The illustrated index to be found on pageone indicates the general content of eachsection, and the section colours areshown on each part of the index.

A contents index is provided on eachsection face page.

A price list is included at the end of eachsection.

Carriage charges and other details areshown on page 144.

Terms and conditions will be found oninside rear cover.

Orders can be placed by telephone, fax,e mail, or post. Our staff will be pleasedto offer help with ordering or to answerany queries you may have. Minimum order value £20.00 excludingVAT and carriage

Dealers and stockists of Exitflex productswill be found throughout the UK, fordetails, please call us on 01202 478334for assistance.

A catalogue is available covering ourcomplete range of PTFE, Rubber andThermoplastic hoses for the Hydraulic,Water Jetting and wider industrialmarkets. Please request a copy and we will bepleased to send it to you.

Product catalogue issue 2 2013

User guide and general information

Our contact details areTelephone 01202 478334 Fax 01202481100 E mail [email protected]

NoteThe product details, information and price datashown in this catalogue are believed to correctat time of printing and supersede and replaceany previous data published by Exitflex UK.E&OE

3

Airless air assisted airlesstips and accessories

Airless tips overview page 4

Airless spray flat tips page 4

Airless air assisted airless tips and accessories page 5

Air assisted airless tips page 6

Tip filters page 7

Titan needles & tip guards page 7

Tip cleaning needles page 7

Aircaps for AAA guns page 7

Seals for AAA tips page 7

Airless reversible tips

Blastaway Speedy 4 &5 page 8

TRIA PRO45 reversible tip system page 10

Twin tips page 12

Airless spray lances &

pole guns page 14

Extrusion guns page 15

Spray tip programme page 16

Tip Clean page 18

Reference charts page 19

Price list page 20

Thread connections page 22

Carriage & packing charges page 144

Terms and conditions inside back cover

Exitflex have been at the forefront of Airless and AAA spray tip design

and manufacture for more than thirty years. Exitflex tips use only the

best quality hardest wearing tungsten carbide and combine quality and

Swiss design with considerable experience of the finishing market to

give our customers the best results in all applications.

section one

4

section one

5

An overviewAirless Spray Tips atomise without air, hence thename. They work when a pump supplies thematerial to be sprayed at high pressure forcing thematerial through the tip orifice at pressure. TheAirless tip atomises the material at the flow rate andspray width determined by the tip as the coatingpasses through it and expands. Airless Air Assisted AAA tips work in a similarmanner, the difference is that by addingcompressed air assistance, lower fluid pressurescan be used. This saves energy and paint and thisis achieved without creating hard edge spraypatterns or tailing. The wide choice of tips providedis to meet the demands of the wide range ofcoating materials that can be sprayed. Each type isdesigned to help the user to get the best of results.Tip WearTips do wear. Factors that affect wear are; fluidpressure, abrasiveness of coating, quantity ofcoating sprayed. When you see a spray widthreduction, check the tip and if it is badly worn,replace it before it costs a great deal of money intime and paint wasted. Paint is wasted when toomuch is put on the job! Tip replacement will costmuch less.Tip SelectionCareful selection will reduce waste and give bettercontrol. Choose a tip to suit the coating and ensurethe tip does not have a greater output than thespray machine. Choose the spray fan width to suitthe job. The wider angle tips eg 70 or 80 degreesare best suited for fast coverage on large flat oruninterrupted areas such as factory walls, shipshulls etc. If a job has a mix of surfaces such as steelfabrications or more complex building spaces, thenuse a narrower tip angle. The Exitflex Twin tip hastwo spray widths in the same key! The orificecontrols the output, so a narrower spray fan needsa faster movement at the spray gun than the widerspray fan. As a guide:- Not enough paint. Choose alarger orifice/ reduce spray angle. Too much paint.Choose a smaller orifice/ increase the spray angle.Tip MarkingsAll the tips in the Exitflex range are marked with thefirst digit as the angle. Where the angle reaches 100degree or above it becomes the first two digits. Theorifice size is the last two digits. eg, 517 = 50degree (approx 10 inches wide) and a 0.017inorifice.The chart provided on page 16 shows aguide to the volume output on water at 100 Bar.

AIRLESS FLAT TIPSFlat Tips are universal. Exitflex proudly offers awide assortment of the finest quality flat tips.They fit all airless spray guns and are widely usedin automatic and many manual applications Theywill be found applying mastics, buffingcompounds, ceramics and a wide variety ofcoating materials throughout industry.

Industrial Grade 63-505/30The full range of size options areavailable with this superb productwhich features high quality hardwearing tungsten spray insertsdesigned for extended life. Thepolished stainless steel bodyfeatures a robust backing retainer.

Tips are fluid tested for performance and quality.

Robotic+Automation Industrial Grade63-505/30/999

Repeat series production forguaranteed matching pattern andflow rate for use on automatedlines and robots. This accuracy iscritical where pattern sizeduplication is essential onprogrammed automatic machines.

Every tip is produced to a master pattern and fluidtested for guaranteed performance. The minimumbatch size is 100 units.

Superfine Industrial Grade 63-509/35 Superfine Tips are designed forprecision spraying with theultimate in high qualityatomisation. SF tips reduceenergy consumption and increasepainting profitability. HOW?...The

design, which incorporates a matched pre orificewithin the assembly, enables users to greatly reducefluid pressures, this in turn reduces paint wastage.SF tips have cut pollution on many large customerproduction lines where they have saved largeamounts of paint, cut cleaning costs and helped toachieve emissions reduction targets, A wideprogramme of sizes is available. Each tip is fluidtested for quality and performance.

Magnatip Contractor Grade 63-512/0 This design has a magneticbacking ring which operatorshave found to be ideal wherethere is no metal blasting dust inthe environment. A standby tipcan be magnetically held on a

spray booth wall or steelwork, then when a spare isneeded it is close to hand. Nickel plated carbon steelbody. Compact tungsten insert.

WINTIP Contractor Grade 63-513/0 Wintip is a non magnetic versionof the Magnatip featuring acarbon steel nickel plated body.The body design has an airflowventuri design providing excellentatomisation. They feature a

compact tungsten insert delivering high value andreliable performance day after day.

LM Contractor Grade 63-507/4 LM Line marking tips are designedfor marking on roads, sportsarenas, parking lots and otherdemanding marking applications.Sharp fine edges with evencoverage across the spray width,

carbon steel nickel plated body and tungsten insert.Range from 0.013in to 0.43in, maximum spray width12in (60º)

TITAN Variable Spray Tips 341-0XXThese are for use withAirless Spray Gunswhen an adjustable

spray pattern is required. Theywill also clear blockages when opened

fully. To order, select from the table below

order ref orifice size-inches fan width-inches

341-015 0.005-0.018 2-4

341-020 0.007-0.019 4-20

341-024 0.007-0.026 4-14

341-028 0.011-0.026 6-22

341-041 0.017-0.035 6-24

341-049 0.021-0.054 6-16

Spray tipsHollow Cone Round Spray (Tungsten Insert)TN-SSTC-XX

Generally used for internal coating.These will fit to all standard AirlessSpray guns. Not available as areversible tip. Size range 0.34mm (0.013in) width 76mm0.41mm (0.016in) width 76mm0.51mm (0.020in) width 89mm

Flat Tip Gasket 21-008-K5 Flat tip gasket

pack of five

INSERT TIPS Blastaway Contractor Grade63-510/0 These tungsten carbide airlessspray inserts come with the seal,spacer and mounting screw, forfitting into older style reversible ballsystems. The size is convenientlystamped on the mounting screw .

Turnaflo Contractor Grade63-515/0 This insert is for mounting intoolder style reversible ball systems.The tungsten insert has a brass face with size marking on it and issupplied with the mounting screw.

PRE-ORIFICE DISCS Manufactured from hard metal,there are 5 different sizes available.The discs are mounted in colourcoded polyamide mouldings whichalso act as a seal replacing thestandard gasket. Pre-orifice discsare mounted directly behind flattips to provide primary pre atomisation.

63-003/0 Size pre-orifice 0.012in White

63-004/0 Size pre-orifice 0.016in Yellow

63-005/0 Size pre-orifice 0.018in Red

63-007/0 Size pre-orifice 0.026in Blue

63-010/0 Size pre-orifice 0.039in Black

Airless Air Assisted Tips overleaf

www.exitflex.co.uk www.exitflex.co.uk

section one

6

AG (GracoTM ) pattern Pin Type Plated Brass Body 63-560/15

For gun models Graco HS 200, AAG 2000 and MBP

AG (GracoTM ) pattern Stainless Steel Body 63-611/30

For gun models Graco G15 and G 40.

AK (KremlinTM) pattern Pin Type Brass Body 63-550/11

For gun models Kremlin MX ASTURO KI and TRIA

AK (KremlinTM) patternStainless Steel Body 63-552/30

For gun models Kremlin MVX

AK (KremlinTM) patternStainless Steel Body 63-554/30

For gun model Kremlin MVX

AIRLESS AIR ASSISTED AIRLESSTIPS AND ACCESSORIESExitflex manufactures high quality Air AssistedAirless - AAA - tips with precision to fit selectedpopular air assisted airless spray guns.

AO (OptimaTM) pattern Stainless Steel Body 63-596/30

For gun model Optima 2100Atomiser

AO (OptimaTM) patternStainless Steel Body 63-598/30

For gun model Optima WIWA2000

AS (SagolaTM) pattern Brass Body ref 63-570/11

For gun models from Sagola, Speeflo and Greenair

AT (DeteTM) patternStainless Steel Body 63-610/30

For gun models Dete BM250 Dete and Krautzberger DUO H

AW (WagnerTM) patternBlack Plastic Body 63-597/20

For gun models WagnerGM 2000 and 2500

AW (WagnerTM) pattern Stainless Steel Body 63-594/30s

For gun models WagnerGM 3000 and 4600.

www.exitflex.co.ukwww.exitflex.co.uk

Tip service itemsFILTERS36-610/K10 Pack of 10 tip filters for AAAtips.

36-020-K10 Pack of 10 disc tip filters 30 mesh.

36-009-K10 Pack of 10 disc tip filters 60 mesh.

36-005-K10 Pack of 10 disc tip filters 100 mesh

36-003-K10 Pack of 10 disc tip filters 200 mesh

32-102/17 Disc tip filter holder fits 7/8in UNF(Graco style)

32-107/17Disc tip filter holder fits 11/16in-16UNEF (Wagner style)

TITAN NEEDLES AND TIP GUARDS 341-3XX Spare needle available all sizes. To order substituteXX for size required ie 341-315

36-052/0 Tip guard fits 7/8in UNF ( Graco )

36-053/0 Tip guard fits 3/8in NPS fitsKremlin / Nordson

36-054/0 Tip guard fits 3/4in x 20 Binks.

36-057/0 Tip guard fits 11/16in x 16 (Wagner)

TIP CLEANING NEEDLES Fine broaches to assist withclearing blockages in Airlessand AAA spray tips

36-701/00 Silver box of 12 packs of 12needles. 08/110gm for tips up to 0 .011in orifice

36-703/00 Purple box of 12 packs of 12 needles. 10/110gm fortips over 0.011in

AIRCAPS FOR AAA GUNSEBX-8 For Kremlin, MX guns, TRIA guns 63-550/11 tip

83-008 For TRIA guns (not illustrated)

96-402 For MBP and AAG 2000 guns(not illustrated) 63-560/15 tip

63-554/MVX4 For Kremlin MVX guns63-554/30 tip

SEALS FOR AAA GUNS163-611-K5 Graco pattern tipPack of 5 seals for 63-611/30

163-554- K5 Graco pattern tipPack of 5 seals for 63-554/18

163-562- K5 Graco pattern tipPack of 5 seals for 63-560/15

163-573- K5 Sagola and Kremlinpattern tip. Pack of 5 seals for 63-570/11

83-011/0A single TRIA seal

83-105/0A single TRIA seal to fit Kremlin MX gun

Spray tips

7

EBX-8

63-554/MVX4

CLEANING BRUSHES24097-R-K10Cleaning brushes 130mm, nylon bristles (pack of 10)

42-884-214-K10Cleaning brushes 250mm, nylon bristles (pack of 10)

CBK-500 Cleaning brush kit This kit contains all thebrushes you should need forgun cleaning. A selection of 6different sizes of brushes, alube bottle and fine broaches.

section one

98

BLASTAWAY SPEEDY 5 MWP 517 BAR

• Patented ball design

• Easy turn when blocked

• Ball in cone seal systemBlastaway Speedy 5 airless reversible tips aredesigned to operate in the most demandingapplications.The patented design ensures a guaranteed centredspray pattern due to the ball key and cone seal design,and when a blockage does occur, the line contact sealguarantees easy turn every time.

Long life from the tungsten insert is assured due to the93 Rockwell hardness. Speedy 5 tips are available instandard form, also in Superfine and Twin Tip versions.Blastaway Speedy 5 offers a choice of seals, the

standard seal 88-509 is ideal formost materials and there is aheavy duty metal seal 88-505The heavy duty seal is availableas an accessory only.

A Speedy base unit is available to fit all the gunslisted in the table opposite and service parts areavailable.


Speedy airless reversible systemBLASTAWAY SPEEDY 4 MWP 400BAR

• Easy turn when blocked

• No tools required for assembly

• Reliable high quaity swivel sealBlastaway Speedy 4 reversible tip units are widelyused and popular in the painting contractor sector.The straight forward cylindrical key seats and sealson a heavy duty delrin faced seal ensuring reliableperformance on all materialsLong life from the tungsten insert is assured due tothe 93 Rockwell hardness.

Speedy4 tips are available in standard form,Superfine and Twin Tip versions.The Speedy 4 base unit needs no tools to assembleand when fitting to the spray gun, the large knurledring makes it easy and comfortable to hand tighten.It is supplied with the standard 88-463 seal.A Speedy 4 base unit is available to fit all the gunslisted in the table below and service parts areavailable.A tip cylinder with stainless steel handle is availablefor use with corrosive materials.

Gun makes Graco Speedflo DeVilbiss Kremlin Binks 505 Bollhoff Dete Asahi Iwata Airlessco AsturoTitan Mercury Sears Ecco Finishing Seiwa Hübner Larius

Krautzberger Taiver Wagner Wiwa

Thread type 7/8 x 14 3/8NPS 3/4 x 20 M18 x 1 M18 x 1.5 11/16 x 16

Speedy 4 ref 88-452 88-453 88-454 88-455 88-456 88-457

Speedy 5 ref 88-552 88-553 88-554 88-555 88-556 88-557

• Always centred

• Choice of seals

• No tools required for assembly

Spray Tips - Speedy 5 kits include seal

88-540 Standard ball tip only

88-591 Standard ball tip/seal kit

88-592 SF Superfine ball tip/seal kit

88-503 Twin tip only

Service parts available for Speedy 5

88-506 Safety guard No 2 and 3

88-536 Safety guard Nos 4, 5, 6, 7

88-505 Seal kit (heavy duty)

88-504 Housing stainless steel No 2 and 3

88-534 Housing stainless steel No 4, 5, 6, 7

88-509 Seal kit (standard)

88-523 Pre-adaptor 3/8 NPS F – 7/8 x 14 M

88-527 Pre-adaptor 11/16 x 16 F – 7/8 x 14 M

21-008-K5 Gasket pack of 5

Service parts available for Speedy 4

88-506 Safety guard No 2 and 3

88-536 Safety guard Nos 4, 5, 6, 7

88-404 Housing stainless steel No 2 and 3

88-434 Housing stainless steel No 4, 5, 6, 7

88-463 Seal assembly

88-523 Pre-adaptor 3/8 NPS F – 7/8 x 14 M

88-527 Pre-adaptor 11/16x16 F – 7/8 x 14 M

21-008-K5 Gasket pack of 5

SPEEDY 4 & 5 BASE UNIT CHART

When ordering please specify part number and tip size When ordering please specify part number and tip size

Spray Tips & Tip Seal kits forSpeedy 4

88-401 Standard tip cylinder

88-406/34 Stainless steel tip cylinder

88-491 Standard tip & seal kit

88-403 Twin tip

88-490 L M Linemarking tip cylinder

88-590

88-552

88-463

88-505

88-509

88-40188-406/34

88-457

The Speedy 5 base unit needs no tools to assembleand when fitting to the spray gun, the large knurledring makes it easy and comfortable to hand tighten.It is supplied with the standard 88-509 seal.

88-527

1110 www.exitflex.co.ukwww.exitflex.co.uk

TRIA ‘Pro45’ reversible tip system for AAA gunsTRIA ‘Pro45’ is the exciting new way to get thevery best from your choice of popular Airless AirAssisted spray gun.

The compact, versitile ‘Pro45’ builds on thebenefits of the original TRIA system.

• Save time, Cut rejects, Clear blockages with ease and without the mess of tip removal, enjoy your work. Just twist and clear. SIMPLE

• Easy to operate and now fits to your choice of AAA spray gun.

• Patented ball tip feature ensures stay clean, spit free operation

Gain the advantage! Get a ‘Pro45’ foryour gun and start an easier way ofworking.

Component PartsAir and fluid seals are specific to each gun model.Ensure when ordering spares that the correct itemsare specified. The aircap base and tips are universal.45-500 Air cap base unit. Universal fit

45-510-XXX Premium standard tip (specify size)

45-519-XXX Superfine tip (specify size)

45-401-K Air seal for (KremlinTM) MVX guns

45-402-K Fluid seal for (KremlinTM) MVX guns

45-411-G Air seal for (GracoTM) G40 guns

45-412-G Fluid seal for (GracoTM) G40 guns

45-421-W Air seal for (WagnerTM) 4600 guns

45-422-W Fluid seal for (WagnerTM) 4600 guns

45-431-B Air seal for (BinksTM) 4400 guns

45-432-B Fluid seal for (BinksTM) 4400 guns

45-441-O Air seal for (OptimaTM) 2000 guns

45-442-O Fluid seal for (OptimaTM) 2000 guns

The TRIA ‘PRO45’ SystemThe TRIA ‘Pro45’ system is designed to be fitted toBinks

TM4400, Graco

TMG40, Kremlin

TMMVX, Optima

2000 series,TM

and WagnerTM

4600, guns and issupplied as a kit comprising an aircap base, areversible tip and air and fluid seals. The air capretaining ring is not included, use the spray gunoriginal. Tips options are:-premium standard and superfine pre-atomiser. - see chart on page16.

Ordering informationPlease select the gun type, tip and tip size andcomplete the order code

TP45/.........../............../...........BinksTM 4400 = B

GracoTM G40 = G

KremlinTM MVX = K

OptimaTM 2000 = O

WagnerTM 4600 = W

Premium standard tip = PS

Superfine pre-atomiser tip = SF

Tip size

For example - TP45/G/PS/409 is a system for aGracoTM gun with premium standard 40º angle0.009in tip

The TRIA‘Pro45’ is a patenteddesign developed for the air assistedairless spray system which hasbecome today’s most importantindustrial spray finishing method.

The TRIA’Pro45’ AAA system benefits include:

• Easier clearance of tip blockages

• Stay clean aircap due to the patented system

• Superior finishes with spit free function and excellent control

• Reduced bounce and blow back with optimum atomisation

• The smallest orifice for the best results can be selected without fear of blockages

• Paint saving by use of the best size of tip

• Benefits to the environment include reduced pollution

• The choice of Premium Standard, or Superfine tips for the ultimate finish

• MWP 280bar (4400psi)

Other Exitflex products already servingthe market include:

• Lightweight flexible hose assemblies

• Welded twin hose sets for AAA systems

• High quality spray tips for AAA and airless applications

• High pressure swivel couplings

• Fluid filters and accessory items

section one

12

section one

13

Twin tips are designed to save time and waste.Where jobs have mixed surfaces, Twin Tip saves youhaving to change spray tips to a different spray width.If a wide angle is used on narrower surfaces, it canmean a significant waste of sometimes expensivecoatings.With Twin Tips you can have two angles in the sametip key and it clears blockages too!Twin Tips save time and money.Don’t forget, on both angles the orifice is the samesize so on the narrower angles a little faster gunstroke will be needed.

Twintip for Airless & Air Assisted TRIA guns

Standard orifice rangeorifice size wide/narrow angles eg 40/20ºin mm 8in 40º 4in 10in 50º 4in 12in 60º 6in

0.010 0.25 40/20º 50º/20º 60º/30º

0.012 0.30 40º/20º 50º/20º 60º/30º

0.014 0.35 40º/20º 50º/20º 60º/30º

0.016 0.40 40º/20º 50º/20º 60º/30º

0.018 0.45 40º/20º 50º/20º 60º/30º

0.020 0.50 40º/20º 50º/20º 60º/30º

Airless Spray Twin Tips 88-503/0 Standard Twin Tip Speedy Mk 5

88-403/0 Standard Twin Tip Speedy Mk 4

Airless Line-marking Twin Tips (TLM)88-490 TLM Twin Tip Speedy Mk4

TRIA Air Assisted Airless Twin Tips88-023/0 TRIA Twin Tip

To OrderSpecify tip reference and size and angle from tableabove eg Speedy 5 88-503/0 (518/20)


Save Time • Paint • Energy • Money

Airless

Air Assisted Airless

ONE TIPTWO ANGLES!

WIDE SPRAY PATTERN CHOICE30º to 80º subject to orifice size.Orifice range 0.004 - 0.026 Other sizes by enquiry.

NARROW SPRAY PATTERN CHOICE10º to 30º subject to orifice size which must be thesame on wide and narrow angles.

Spray painting has evolved changing tip sizes - with a twist

section one

1514

Airless spray lances & pole guns

Item Reference Description Item Reference Description

1 32-050/2 Universal connector

2 36-202/43 Nut 7/8 - 14 UNF Graco

2 36-203/30 Nut 3/8 - 18 NPS DeVilbiss, Kremlin

2 36-204/30 Nut 3/4 - 20 UNF Binks

2 36-205/30 M18 x 1 Atlas Copco

2 36-207/43 Nut 11/16 - 16 UNEF Wagner, Aro

3 32-002/17 Directional w/filter housing 7/8 UNF

3 32-007/17 Directional w/filter housing 11/16 UNF

4 32-102/17 Straight filter housing 7/8 UNF*4 32-107/17 Straight filter housing 11/16 UNF*5 36-020-K10 Disc filter 30 mesh. Pack of 10

5 36-009-K10 Disc filter 60 mesh. Pack of 10

5 36-005-K10 Disc filter 100 mesh.Pack of 10

5 36-003-K10 Disc filter 200 mesh Pack of 10

6 32-132/27 Straight adaptor 7/8 UNF

6 32-137/27 Straight adaptor 11/16 UNF

7 21-008-K5 Seal pack of 5

8 32-306/16 Lance 6 inches

9 32-312/16 Lance 12 inches

10 32-318/16 Lance 18 inches

11 32-324/16 Lance 24 inches

12 32-336/16 Lance 36 inches

13 38-004 Nylon plug seal (use in place of filter for speedy MK 5)

AIRLESS POLE GUNS Airless Pole Guns are suitable for many kinds of paintproducts. Trigger guard included. Needle extendedup to an adjustable position housing, 11/16UNFconnection to accept 88-457 Mk 5 tip housing.210bar (3,045psi) maximum inlet pressure. Fluid inletconnection 1/4NPS(M)

Ref Description

PG-100 Pole Gun 1000mm



12in extension onSP90 airless gunwith directionalfilter housing &Speedy Mk5

AIRLESS SPRAY LANCES

* must be used in conjunction with item 6

Extrusion guns

HIGH PRESSURE EXTRUSION GUN

This product part number 06-030-000-02 is designedfor seam sealing and similar duty in automotive andindustrial markets. It incorporates an ergonomic handtrigger design for operator comfort and features:adjustable lockable flow, tungsten seat and needletip and micro swivel.A nozzle holder part number 32-060/30 is availablethat accepts simple plastic nozzles.The plasticnozzle is not suitable for high pressure applications.MWP 250bar Weight 670gm

AIRLESS FLOW GUN

Airless Flow Gun, model 880-355, is suitable forapplication of grease, mastics, sealers and variousheavy materials. The gun is normally fed by heavyduty extrusion pump capable of pressures up to210bar MWP. The gun weighs 500gm. Fluid inletconnection is 1/4NSP(M). The 880-335 can be usedin conjunction with a spray lance as shown below.

The airless flow gun 880-355 Illustrated with 12 inch lance and angle head ready for spray dutyOrder items individually.

880-335

355-505

06-030-000-02

32-060/30Disposable plastic nozzle. Pack of 20 PN1-K20


section one

1716

Spray tip programme

NOTESCOLOUR BARS INDICATE TIP RANGE AS FOLLOWS

Spray angles quoted are as manufactured and tested onwater. Spray widths can vary and depend upon viscosity,solids content and pressure employed. The figures quotedare as a guide only.Other sizes may be possible by special enquiry.. Pleaseenquire.

The following size ranges are suggested for the materialslisted.Stains and lacquers 0.006in to 0.013inOil based paints 0.013in to 0.015in Latex emulsions 0.017in to 0.021inHeavy paints, latex & intumescents 0.023in to 0.029inBlock fillers, textures & epoxies 0.029in to 0.061in

When selecting a tip size the paint manufacturer will oftensuggest suitable sizes in their data sheets.

TRIA ‘Pro45’ TIP PROGRAMME Stock size range for 45-510 Premium Standard Tips is:-from 0.009 to 0.015in. Other sizes to order.

‘Pro45’ Superfine Tips 45-519 are all sizes to order.

INDUSTRIAL AND AAA TIPS

SUPERFINE TIPS

SPEEDY AND CONTRACTOR TIPS

TRIA ‘Pro45’ PREMIUM STANDARD TIPS


ORIFICE SIZE SPRAY ANGLES IN DEGREES AND WIDTH IN INCHES FLOW RATE WATER 100bar (1500psi)10 20 30 40 50 60 70 80 90 100 110 L/min GPM

inch mm 2/3 4/6 6/8 8/10 10/12 12/14 14/16 16/1 18/20 20/22 22/24

0.006 0.15 0.14 0.040

0.007 0.18 0.18 0.047

0.008 0.20 0.22 0.060

0.009 0.23 0.25 0.066

0.010 0.25 0.33 0.09

0.011 0.28 0.37 0.087

0.012 0.30 0.47 0.13

0.013 0.33 0.57 0.15

0.014 0.35 0.65 0.18

0.015 0.38 0.72 0.19

0.016 0.40 0.91 0.24

0.017 0.43 0.98 0.26

0.018 0.45 1.10 0.29

0.019 0.48 1.30 0.34

0.020 0.50 1.40 0.37

0.021 0.53 1.52 0.40

0.022 0.55 1.65 0.45

0.023 0.58 1.83 0.48

0.024 0.60 1.95 0.54

0.025 0.63 2.13 0.56

0.027 0.68 2.50 0.660

0.029 0.73 2.95 0.78

0.31 0.78 3.42 0.90

0.033 0.84 3.80 1.00

0.035 0.89 4.30 1.14

0.037 0.94 5.10 1.34

0.039 0.99 5.50 1.45

0.041 1.04 6.15 1.62

0.043 1.09 6.80 1.79

0.045 1.14 7.40 1.95

0.047 1.19 7.94 2.09

0.049 1.24 8.50 2.25

0.051 1.29 9.10 2.40

0.053 1.35 9.80 2.60

0.055 1.40 11.00 2.90

0.057 1.45 11.80 3.10

0.059 1.50 12.50 3.30

0.061 1.55 13.70 3.60

section one

1918

Tip clean system


Reference charts

EQUIVALENT KREMLIN / EXITFLEX

10° 20° 30° 40° 50° 60° 70° 80° 90° 100°

8cm 13cm 18cm 23cm 28cm 33cm 38cm 43cm 48cm 53cm

0.007 03/03 03/05 03/07 03/09 03/11 03/13 03/15 03/17 03/19 03/21

0.009 04/03 04/05 04/07 04/09 04/11 04/13 04/15 04/17 04/19 04/21

0.011 06/03 06/05 06/07 06/09 06/11 06/13 06/15 06/17 06/19 06/21

0.013 09/03 09/05 09/07 09/09 09/11 09/13 09/15 09/17 09/19 09/21

0.015 12/03 12/05 12/07 12/09 12/11 12/13 12/15 12/17 12/19 12/21

0.017 14/03 14/05 14/07 14/09 14/11 14/13 14/15 14/17 14/19 14/21

0.020 20/03 20/05 20/07 20/09 20/11 20/13 20/15 20/17 20/19 20/21

0.024 30/03 30/05 30/07 30/09 30/11 30/13 30/15 30/17 30/19 30/21

0.029 45/03 45/05 45/07 45/09 45/11 45/13 45/15 45/17 45/19 45/21

0.033 60/03 60/05 60/07 60/09 60/11 60/13 60/15 60/17 60/19 60/21

0.035 68/03 68/05 68/07 68/09 68/11 68/13 68/15 68/17 68/19 68/21

0.044 100/03 100/05 100/07 100/09 100/11 100/13 100/15 100/17 100/19 100/21Use references above with suffix 3 for 63-550/11 Pin type & suffix 6 for 63-552/30 Groove type AK tipsi.e. 63-552/30 14/096 or 63-554/30 14/096

EQUIVALENT DELAVAN / EXITFLEX

10° 20° 30° 40° 50° 60° 70° 80° 90° 100°

8cm 13cm 18cm 23cm 28cm 33cm 38cm 43cm 48cm 53cm

0.007 A2/715 A3/725 A4/735 A5/740

0.009 B2/915 B3/925 B4/940 B5/950 B6/965

0.011 C2/1115 C3/1125 C4/1140 C5/1150 C6/1165

0.013 D2/1315 D3/1325 D4/1340 D5/1350 D6/1365 D7/1380 D8/1395

0.015 E2/1515 E3/1525 E4/1540 E5/1550 E6/1565 E7/1580 E8/1595

0.016 F2/1615 F3/1625 F4/1640 F5/1650 F6/1665 F7/1673 F8/1680 F9/1695

0.017 G2/1825 G3/1840 G4/1850 G5/1865 G6/1880 G7/1895

0.019 H2/2025 H3/2040 H4/2050 H5/2060 H6/2065 H7/2080 H8/2095

0.021 J2/2125 J3/2140 J4/2150 J5/2165 J6/2180 J7/2195

0.023 K2/2425 K3/2440 K4/2450 K5/2465 K6/2473 K7/2480

0.025 L2/2625 L3/2640 L4/2650 L5/2665 L6/2680

0.029 M2/2925 M3/2940 M4/2950 M5/2965 M6/2973 M7/2980

0.031 N2/3140 N3/1350 N4/3165 N5/3180

0.035 P2/3640 P3/3650 P4/3665 P5/3680

0.043 R3/4340 R4/4350 R5/4365 R6/4380

0.048 S2/4880

Pressure (bar) Flow (%) Factor120 110 X 0.11140 120 X 0.12160 130 X 0.13180 140 X 0.14200 150 X 0.15

Pressure (bar) Flow (%) Factor20 40 X 0.4040 60 X 0.6060 75 X 0.7580 90 X 0.90100 100 X 0.10

Spray tip flow rate at different pressures using water as a medium as refered to in the ExitFlex tip chart on page18 where flow rate is given at 100bar

• Discover the convienience of TipClean to make your finishing easy

•Special cleaning solvent

• Store your tips and clean after use

• Ready to spray, first time every time

label the bottle and find it ontime. Just that easy.

very handy transport withoutdust or other pollutants

place tip inside, turnTipClean upside down.

Thats it.TC 50Ideal for flat andairless airassisted tips.TC250 cleaningsolvent refill250ml

TC 200The largercontainer isdesigned forreversible tipsTC1000 cleaningsolvent refill 1 litre

Big wipes are anindispensible cleaningsolution for thosetough jobs. They helpto keep your handshygienic and in goodcondition. 80 wipe tubs

STORE

EASY TRANSPORT

TIP CLEAN

BIW-640 tray of 8x80wipes industrial standardgrade (black top)BWP-640 tray of 8x80wipes industrial plus grade(red top)

section one

2120

Airless & AAA tips and accesories price listorder ref description r.r.p order ref description r.r.p

Airless spray flat tips63-505/30/999 Industrial robotic tip £35.00

63-505/30 Industrial flat tip £25.00

63-507/4 Contractor line marking £25.00

63-509/35 Industrial superfine £57.95

63-510/0 Contractor insert tip £26.25

63-512/0 Contractor magnetic tip £26.50

63-513/0 Contractor wintip £20.00

63-515/0 Contractor insert tip £26.25

63-003/0 Pre orifice white 0.012in £12.99

63-004/0 Pre orifice yellow 0.016in £12.99

63-005/0 Pre orifice red 0.018in £12.99

63-007/0 Pre orifice blue 0.026in £12.99

63-010/0 Pre orifice black 0.039in £12.99

Air assisted airless tips63-550/11 AK (Kremlin MX) pattern £48.50

63-554/30 AK (Kremlin MVX) pattern £60.50

63-560/15 AG (Graco) pattern £48.50

63-570/11 AS (Sagola) pattern £48.50

63-597/20 AW (Wagner) pattern £55.00

63-594/30 AW (Wagner) pattern £58.75

63-596/30 AO (Optima Atomiser ) pattern £67.50

63-598/30 AO (Optima) pattern £50.00

63-610/30 AT (Dete) £49.50

63-611/30 AG (Graco G40) pattern £49.50

Aircaps for AAA gunsEBX-8 TRIA Kremlin £60.00

83-010 TRIA reversible base £87.50

96-402 MBP AAG 2000 £85.00

63-554/mvx4 AK pattern MVX £160.00

Airless reversible tips and base units88-452 Speedy 4 base unit 7/8in x 14 £22.00

88-453 Speedy 4 base unit 3/8in NPS £22.00

88-454 Speedy 4 base unit 3/4in x 20 £22.00

88-455 Speedy 4 base unit M18 x1mm £22.00

88-456 Speedy 4 base unit M18 x 1.5mm £22.00


88-401-XXX Speedy 4 std tip (specify size) £25.00

88-491-XXX Speedy 4 std tip+seal kit (specify size) £29.50

88-406/34-XXX Speedy 4 stainless tip (specify size) £59.95

88-403-XXX Speedy 4 twin tip (specify size) £45.00

88-490 -XXX Speedy 4 line marking tip (specify size) £32.50

88-506 Safety guard 2 and 3 £8.96

88-536 Safety guard 4,5,6,7 £8.96

88-404 Housing 2 and 3 £14.00

88-434 Housing 4,5,6,7 £14.00

88-463 Seal £10.00

88-523 Pre adaptor 7/8in x 14m-3/8in NPSF £19.95

88-527 Pre adaptor 11/16inx16 F-7/8inx14m £19.95

21-008-K5 Gasket pack of 5 £6.00

Airless reversible tips and base units88-552 Speedy 5 base unit 7/8in x 14 £22.00

88-553 Speedy 5 base unit 3/8in NPS £22.00


88-555 Speedy 5 base unit M18 x 1 £22.00

88-556 Speedy 5 base unit M18 x 1.5 £22.00

88-557 Speedy 5 base unit 11/16 x 16 £22.00

88-501 Standard tip only £35.00

88-591-XXX Std tip and seal kit (specify size) £46.50

88-592-XXX SF tip and seal kit (specify size) £66.50

88-503-XXX Twin tip only (specify size) £50.00

88-505 H.D. metal seal £12.00

88-509 Standard seal £8.00

88-506 Safety guard 2 and 3 £8.96

88-536 Safety guard 4,5,6,7 £8.96

88-504 Housing 2 and 3 £14.00

88-534 Housing 4,5,6,7 £14.00

88-523 Pre adaptor 3/8 NPS F-7/8 x 14m £19.95

88-527 Pre adaptor 11/16 x 16 F-7/8 x 14m £19.95

Spray tip seals and tip filters21-008-K5 Flat tip gasket set of 5 pack of 5 £6.00

83-011/0 TRIA standard seal £10.59

83-105/0 TRIA seal for Kremlin £13.00

163-554-K5 Graco AAA pack of 5 £8.30

163-573-K5 Kremlin, Sagola pack of 5 £8.30

163-611-K5 Graco AAA G40 pack of 5 £8.30


order ref description r.r.p order ref description r.r.p

Tip filters and cleaning brushes32-102/17 Disc tip filter holder Graco £20.50

32-107/17 Disc tip filter holder Wagner £20.50

36-003-K10 Disc tip filter 200 mesh pack of 10 £49.96




36-610-K10 Filters AAA tips pack of 10 £35.00

24097-R-K10 Cleaning brushes 130mm pack of 10 £35.00

42-884-214-K10 Cleaning brushes 250mm pack of 10 £24.00

CBK-500 Cleaning brush kit £19.50

Titan variable spray tips341-015 0.005-0.018 £109.80

341-020 0.007-0.019 £109.80

341-024 0.007-0.026 £109.80

341-028 0.011-0.026 £109.80

341-041 0.017-0.035 £109.80

341-049 0.021-0.054 £109.80

341-3XX State size ie 341/315 spare needle £39.50

36-052/0 Titan tip guard 7/8in UNF £11.90

36-053/0 Titan tip guard 3/8in NPS £11.90

36-054/0 Titan tip guard 3/4in x 20 £11.90

36-057/0 Titan tip guard 11/16 x 16 £11.90

Hollow cone round spray airless tipTN-SSTC-XX Specify size £164.00

Tip cleaning needles36-701/00 Pack 12 x 12 silver up to 0.011in £160.00

36-703/00 Pack 12 x 12 purple over 0.011in £160.00

TRIA reversible air assisted airless system *83-010 Air cap base £87.50

83-011/0 Swivel seal £10.59

83-015 TRIA std tip specify size £46.50

83-020 TRIA superfine tip specify size £66.50

83-023 TRIA twin tip specify size £62.50

TRIA adaptor kits *83-105/0 For Kremlin MX (seal) £13.00

83-009/14 For AAG 2000 (ring) £10.40

83-525/0 For Graco alpha plus (kit) £64.00

83-509/30 For Optima (kit) £70.00

* Available until the end of stock

Tria Pro45 Reversible systemTP45/K/PS Kit for Kremlin MVX, specify tip size £242.00

TP45/G/PS Kit for Graco G40, specify tip size £242.00

TP45/W/PS Kit for Wagner 4600, specify tip size £242.00

TP45/B/PS Kit for Binks 4400, specify tip size £242.00

TP45/O/PS Kit for Optima 2000, specify tip size £242.00

TP45/K/SF Kit for Kremlin MVX, specify tip size £262.00

TP45/G/SF Kit for Graco G40, specify tip size £262.00

TP45/W/SF Kit for Wagner 4600, specify tip size £262.00

TP45/B/SF Kit for Binks 4400, specify tip size £262.00

TP45/O/SF Kit for Optima 2000, specify tip size £242.00

45-500 PRO45 Air cap base. £170.00

45-510-XXX Premium Standard tip (specify size) £50.00

45-519-XXX Superfine pre-atomiser tip (specify size) £70.00

45-401-K Air seal Kremlin MVX guns £10.00

45-402-K Fluid seal Kremlin MVX guns £12.40

45-411-G Air seal Graco G40 guns £10.00

45-412-G Fluid seal Graco G40 guns £12.40

45-421-W Air seal Wagner 4600 guns £10.00

45-422-W Fluid seal Wagner 4600 guns £12.40

45-431-B Air seal Binks 4400 guns £10.00

45-432-B Fluid seal Binks 440 guns £12.40

45-441-O Air seal Optima 2000 guns £10.00

45-442-O Fluid seal Optima 2000 guns £12.40

Twintip88-503/0-XXX Speedy 5 (specify size) £50.00

88-403/0-XXX Speedy 4 (specify size) £45.00

88-490/0-XXX Speedy4 LM (specify size) £32.50

88-023/0-XXX TRIA (specify size) £62.50

Extrusion guns880-355 Flow gun 210 bar £199.00

355-505 Nozzle £25.00

06-030-000-02 Extrusion gun 250bar £240.00

32-050/2 Universal connector £12.00

32-060/30 Nozzle holder £24.00

PN1-K20 Disposable plastic nozzle. Pack 20 £ 6.50

Airless spray lances32-050/2 Universal connector £12.00

36-202/43 Nut 7/8in x 14 £9.85

36-203/30 Nut 3/8in NPS £9.85

36-204/30 Nut 3/4in x 20 £9.85

36-205/30 Nut M18 x 1 £9.85

36-207/30 Nut 11/16in x 16 £9.85

section two

23

High pressurethermoplastic hoses

and accessoriesHose features page 24

Air assisted airless spray hose asemblies page 24

SPR series specified pressure airless paint spray hose assemblies page 25

Thermoplastic hose range page 26

Thermoplastic hose data chart page 27

Inserts and ferrules page 28

High pressure swivels page 30

High pressure Y blocks page 31

Couplings and adaptors page 31

High pressure needle andball valves page 34

Chemical resistance chart page 35

Price list page 36

Carriage & packing charges page144


Exitflex hoses and accessories meet the complex demands of industry

where top quality and reliability are essential. The Exitflex hose range

is supplied in bulk, as standard industry lengths or custom lengths to

meet your specific requirement. The hose and accessories shown are

designed for many applications including paint spray, drain cleaning

and hydraulics. Contact our staff for sales or technical assistance,

they will be pleased to help.

22

Airless & AAA tips and accesories price listorder ref description r.r.p

www.exitflex.co.uk

32-002/17 Directional 7/8 UNF £98.35

32-007/17 Directional 11/16 x 16 £98.35

32-102/17 Filter housing 7/8 UNF £20.50

32-107/17 Filter housing 11/16 x 16 £20.50

32-132/27 Straight adaptor 7/8 UNF £11.50

32-137/27 Straight adaptor 11/16 x 16 £11.50

21-008-K5 Seal pack of 5 £6.00

32-306/16 Lance only 6in £34.75

32-312/16 Lance only 12in £42.00

32-318/16 Lance only 18in £45.00

32-324/16 Lance only 24in £45.00

32-336/16 Lance only 36in £54.00

38-004/46 Nylon plug seal £5.00

36-020-K10 30 mesh pk 10 £49.96

36-009-K10 60 mesh pk 10 £49.96

36-005-K10 100 mesh pk10 £49.96

36-003-K10 200 mesh pk10 £49.96

Airless pole gunsPG-100 Pole gun 1000mm £ 205.00

PG-180 Pole gun 1800mm £ 232.00

PG-240 Pole gun 2400mm £ 285.00

Tip Cleaning SystemTC50 Tip clean c/w 50ml fluid £12.50

TC250 Cleaning fluid 250ml £10.50

TC200 Tip clean c/w 200ml fluid £25.00

TC1000 Cleaning fluid 1 litre £22.50

BIW-640 Big wipes 8 x 80 wipes black standard £61.28

BWP-640 Big wipes 8 x 80 wipes red plus £86.12

Gun LubricantSGL-50 Silicone free spray lubricant 50ml £ 7.92

Thread connections in use by popularequipment manufacturers

Airlesco Airless 1/4 and 3/8 NPSM

Anest Iwata Conventional HVLP 1/4 BSP air 3/8 BSP fluidAirless air assisted 1/4 BSP air 1/4 BSP fluid

ARO Airless 1/4 and 3/8 NPSM

Binks ITW Air assisted airless 1/4 BSP air 1/4 NPSM fluid

Binks Pressure feed 1/4 BSP air 3/8 BSP fluid

Devilbiss ITW Conventional and HVLP 1/4 BSP air 3/8 BSP fluid

Graco Airless 1/4 and 3/8 NPSMGraco Air assisted airless

1/4 BSP air 1/4 NPSM fluid

Kremlin Air assisted airless M14 x1 air 1/2in JIC.17/25 pump inlet M26 x 1.5

Norson Airless 1/2in JIC

Ransburg Airless 1/4 NPSM(F)Solo gun Air 1/4 NPSM (F) left handFluid 1/4 NPSM (F) standard

Sagola Conventional air spray1/4 BSP air 3/8 BSP fluid

Air assisted airless 1/4 BSP air 3/8 BSP fluid

Titan Speeflo Airless 1/4 and 3/8 NPSM

Wagner Airless 1/4 and 3/8 NPSM1/4 NPSM fluid M16 x 1.5 older equipmentAir assisted airless 1/4 BSP airM16 on some older equipment

WIWA Airless 1/4 and 3/8 NPSM

High pressure thermoplastic hose

Exitflex are major suppliers to the paintspray industry with the finest range ofproducts available in the market placetoday. We offer you technical back upand stock holding in the UK

Single line or welded twin, lightweight textile braidedfluid hoses with connections to suit your choice. Thetwin hoses feature reinforced or non reinforced airhose. Four standard lengths are available, see page35. Custom lengths are available to order.

KRW.2.3.4 Twin hose 3/16in bore fluid 235bar MWP1/4in bore reinforced air hose.

KPW.2.3.4 Twin hose 3/16in bore fluid 235bar MWP1/4in bore non reinforced air hose.

KX.2.3 Single line 3/16in bore 235bar MWP

KX.2.4 Single line 1/4in bore 250bar MWP

Designed for use with electrostatic AAA systemswelded twin assemblies with conductive air and fluid

24

• Customer support

• Swiss technology

• High performance

• Flexible yet hard wearing

• Hoses for most applications

section two

25www.exitflex.co.uk

SPR 230 Blue cover. For use with electric drive pumps.

SPR 230-3ID 3/16in (4.8mm) 1/4NPSM(F) connections 1 spring guard


SPR 230-6ID 3/8in (9.6mm ) 1/4NPSM(F) connections 1 spring guard

SPR 300 Blue/navy cover. For use with pneumatic pumps.



SPR 400 Grey cover. For use with higher ratio pumps.




SPR 500 Black cover. For heavy duty high pressure use

SPR 500-3ID 3/16in (4.8mm) 1/4NPSM(F) connections no spring guards





SPR SERIES - AIRLESS PAINT SPRAY HOSE ASSEMBLIESSPECIFIED PRESSURE RANGE These factory built assemblies are all fitted with NPS(F) hose connections and spring guards as indicated. Choosefrom the four ranges to meet your needs, all are nylon lined, conductive and are ATEX compliant with full traceability.Prices and industry standard lengths will be found on page 35.

SPR 230.x textile braided MWP 230Bar MBP 920Bar ID 3/16, 1/4 and 3/8in

SPR 300.x wire braided MWP 300Bar MBP 1200Bar ID 1/4 and 3/8in

SPR 400.x wire braided MWP 400Bar MBP 1600Bar ID 1/4, 3/8 and 1/2in

SPR 500.x wire braided with aramid MWP 500Bar MBP 2000Bar ID 3/16, 1/4, 3/8, 1/2 & 3/4in

www.exitflex.co.uk

lines are available featuring larger bore fluid hose tomaintain pressure over longer lengths. At the gun endthe air connection has a lefthanded thread and thefluid side incorporates a flexible one metre whip hoseas standard

KLCW.2.4.4 Twin hose 1/4in bore fluid 250bar MWP1/4in bore conductive air hose.

AIR ASSISTED AIRLESS SPRAY HOSE ASSEMBLIES

section two

27

THERMOPLASTIC HOSES RANGEExitflex thermoplastic hoses are available in bulk oras assemblies as described on this page, the datachart opposite and the price list on page 36.Please ensure the correct hose, maximum workingpressure, bore and inner tube liner is selected to dothe job, if in doubt ask, we will be pleased to assist.If assemblies are required you will need to decidewhat threads are required to suit your equipment..To assemble connections onto bulk hose, specialequipment is required. If you are properly equippedwith the machinery and experience to do the job,bulk hose is available in coil lengths to suit yourrequirements. Use matched fittings from the rangeshown on pages 26 and 27.

DP Drain Cleaning HoseA flexible small bore 3/16in hose with a very tightbend radius. DP was designed for small bore drains.It gives a fast and thorough flushing action whenused with Exitflex rotary and fixed nozzles. (colourbronze - Br)

EF179 Stainless Steel Overbraided PTFE HoseEF179 features a PTFE tube frequently specified infood and pharmaceutical applications. Also used inpaint spray markets for applications where a lowerpressure application can be met. PTFE gives fastclean colour change and can be immersed in solventwithout damage as there is no cover. Light weightand very flexible.

EF709 Paint Spray Hose -PA12 LinerDesigned for high pressure airless paint spraysystems. A two wire braid and polyamide 12 innertube makes this hose suitable for applicationsrequiring chemical resistance to solvents andaggressive fluids. Due to the low permeation value ofpolyamide 12, the hose can also be specified for usewith moisture sensitive materials; eg two part PUfoams. (colour navy blue Bn)

HD Extra Heavy Duty RangeHD hoses are designed for very high pressure use .to apply solvent free coatings, mastics, intumescentsand similar. The HD series is perfectly suited to thisapplication whilst maintaining excellent flexibility andkink resistance. The design incorporates wire andaramid braiding for the maximum strength with thelowest weight practical. (colour red Rd)

High pressure thermoplastic hoseKX Air Assisted Airless & Airless Spray HoseDeveloped originally for a major manufacturer ofairless spray pumps. KX hoses have superiorpulsation dampening characteristics for the very bestresults. KX hoses use a durable textile braid with aconductor and are thus ATEX compliant. (colour lightblue Bl)

PA Hose rangePA hoses are ideal for use with a wide range ofpneumatically driven pumps for airless spray. Thiscomprehensive range of wire braided hoses, made inboth single and two wire reinforcement, is built to ahigh standard with excellent flexibility and flexfatigue, it is UV and ozone resistant, 100%conductive and has excellent abrasion resistance.Standard colour is navy blue,other colours areavailable to special order. Applications for this rangeinclude paint spray, hydraulics and transportation ofchemicals and solvents.(colour navy blue Bn)

KMW 2.3.4 Air Assisted Airless Twin HoseA 3/16in ID welded twin hose, light to carry andflexible in use. HP textile braided fluid hose welded toa 1/4in ID PU air hose. It is designed as a neatsolution for use with airless air assisted spray guns.(colour blue/redBl Rd)

SX Hose - Pulsating This larger bore durable textile hose is very wellsuited to spray plaster and other similar applicationsin the contractor market, conductive and ATEXcompliant. (colour light blue Bl)

TC Multi Purpose HoseTC hoses are wire braided and are particularly wellsuited to coatings that require a moisture free innertube. TC hoses feature FEP140 extruded grade teflonwhich assures no moisture holding capability. idealfor moisture curing adhesives and perfect for rapidcolour changing and fast clean up. An ideal multipurpose hose. (colour black Bk)

WE Whip End HoseAn extremely flexible, conductive, 550 bar MWP hoseto provide operator comfort in use. Designed as awhip end and available as assemblies in 3 and 5metre lengths. (colour translucent blue TrBl)


HOSE REF ID in OD mm MWP bar gm/metre COLOUR INNER TUBE COVER BRAIDING APPLICATION

DP1.3 3/16 9.0 250 85 Br PE PU 1 x Textile Drain cleaning

EF709-4 1/4 13.7 475 300 Bn PA12 PU 2 x C Steel Paintspray/ Chemicals




HD 2.4 1/4 13.6 700 225 Rd PA PU 1 x C Steel 1 Aramid HD PaintSpray




KX 2.3 3/16 10.2 235 75 Bl PA PU 2 x Textile PaintSpray Pulsating

KX 2.4 1/4 12.3 250 95 Bl PA PU 2 x Textile PaintSpray Pulsating

PA 1.2 1/8 6.9 350 60 Bn PA PU 1 x C Steel HP Paintspray









EF 179.3 3/16 5.0 190 - - PTFE - 1 x S Steel Paint spray Multi use

EF 179.4 1/4 6.0 180 - - PTFE - 1 x S Steel Paint spray Multi use

KMW 2.3.4 3/16 10.2 235 165 Bk + BL PA PU 2 x Textile AAA Paintspray Twin

SX 2.6 3/8 17.8 275 200 Bl PA PU 2 x Textile PaintSpray Pulsating

SX 2.8 1/2 22.5 250 290 BL PA PU 2 x Textile PaintSpray Pulsating

TC 1.2 1/8 6.9 350 85 Bk FEP140 PU 1 x C Steel Multipurpose






TC 2.12 3/4 30 275 1000 Bk FEP140 PU 2 x C Steel Multipurpose

WE 2.3 3/16 11.5 550 140 TrBn PA PU Aramid/St.Steel Safety Whipend

WE 2.4 1/4 13.6 550 170 TrBn PA PU Aramid/St.Steel Safety Whipendpaintspray

All hoses are built to a 4:1 safety ratio. All hoses both textile and wire braided are conductive. Fully detailed datasheets may be downloaded as PDF files from the Exitflex website.Inner tube and cover code: PA = polyamid 6 PA12 = polyamid 12 PU = polyurathane FEP.140 = extruded teflonPTFE = polytraflouride

DATA CHART

26

28

section two

29www.exitflex.co.ukwww.exitflex.co.uk

Inserts and ferrulesSelect the hose insert by the hose bore and threadform required. The listing indicates both. The ferrulesare matched to the hose types as indicated in thelisting on page 27. Hose inserts and ferrules arebichromated mild steel as standard. There areseveral inserts with stainless steel hose tails andbichromated mild steel nuts.

HIGH PRESSURE SWAGE INSERTS

for 1/8in Bore Hoses

75-012/1 1/4 NPT(M)

75-014/1 1/4 NPSM(M)

75-037/1 1/8 BSP(M)

75-040/1 1/4 BSP(F) swivel nut

75-042/1 1/4 NPSM(F) swivel nut 19mm Hex nut

75-042/37 Ditto in S Steel 304 insert, plated nut

75-043/1 1/4.NPSM(F) swivel nut 17mm hex nut

75-044/1 JIC 1/2in x 20(F) swivel nut

75-045/1 1/8 NPSM(F) swivel nut

75-046/1 M16 x 1.5 (F) swivel nut

75-048/1 1/8 BSP(M) swivel nut

75-049/1 1/4 BSP(M) swivel nut

75-202/1 Round 1/8 BSP(M)


75-013/1 1/4 NPT(M)

75-015/1 1/4 NPSM(M)

75-050/1 1/4 BSP(F) swivel nut. 19mm hex nut

75-050/37 Ditto in S Steel 304 insert, plated nut.

75-052/1 1/4 NPSM(F) swivel nut, 19mm hex nut


75-053/1 1/4 NPSM(F) swivel nut.17mm Hex nut


75-056/1 M16 x1.5 (F) swivel nut

75-056/37 Ditto in St Steel 304 insert, plated nut

75-057/1 M16 x 1.5(M)

75-059/1 1/4 BSP(M)

75-067/1 1/8 NPT (M)

75-203/1 Round 1/8 BSP(M)

75-211/1 Round 1/8 BSP(M) long

75-258/30 Round 1/8 BSP(M) short. St Steel 304





75-009/1 1/4 BSP(M).

75-010/1 3/8 NPSM(F) swivel nut.

75-017/1 1/4 NPSM(F) swivel nut 19mm hex nut


75-018/1 1/4 NPSM(F) swivel nut. 17mm Hex nut

75-020/1 1/4 NPT(M)

75-032/1 M16 x 1.5(F) swivel nut



for 3/8in Bore Hoses75-003/1 1/4 BSP(F) swivel nut. 19mm Hex nut

75-007/1 3/8 BSP(M)






75-030/1 3/8 NPT(M)

75-034/1 M16 x 1.5(F) swivel nut.





75-085/1 1/2 NPT(M)

75-089/1 1/2 BSP(M)

Stainless Steel by enquiry.


75-111/1 3/4 NPT(M) taper male insert only

75-112/1 3/4 NPSM(F) swivel insert only

for 3/4in Bore Hoses Insert & Ferrule Set34312B12F 3/4 BSP(F) swivel nut plus ferrule 34312N12F 3/4 NPSM(F) swivel nut plus ferrule

for 3/4in Bore HD Hoses - insert & Ferrule set35012N12F 3/4 NPSM(F) swivel nut plus ferrule

35012B12F 3/4 BSP(F) swivel nut plus ferrule

HIGH PRESSURE SWAGE FERRULES75-800/51 F1.2 app KX 1.2 / PA.1.2 / TC.1.2.

75-803/51 F1.2 app EF179.3

75-805/51 F1.3 app PA.1.3 / TC.1.3.

75-806/51 F2.3 app KX.2.3 / WE.2.3 / EF179.4

75-808/51 F1.3 app DP.1.3 only (Short)

75-810/51 F1.4 app PA.1.4 /TC.1.4 / SYT.1.4

75-812/51 F2.4 app PA.2.4 /HD.2.4 / EF709.4 WE 2.4

75-815/51 F2.4 app KX.2.4

75-820/51 F1.6 app PA.1.6 / TC.1.6.

75-826/51 F2.6 app EF709.6 / PA.2.6 / SYT.2.6 HD.2.6

75-830/51 F1.8 app PA.1.8 / TC.1.8.

75-835/51 F2.8 app EF709.8 / PA.2.8 / TC.2.8 HD.2.8.

75-848/51 F2.12 app EF709.2.12 / PA.2.12 / TC.2.12

75-860/51 F1.4 app PAM.1.4

75-870/51 F1.6 app PAM.1.6.

for 3/4in Bore HD Hoses - Insert & Ferrule set

35012N12F 3/4 NPSM(F) swivel nut plus ferrule

35012B12F 3/4 BSP(F) swivel nut plus ferrule

REUSABLE HIGH PRESSURECOUPLINGS77-001/2 1/4 BSP(F) swivel (for 1/4 bore)

77-001/38 Ditto in stainless steel nipple. Black nut.Nickel body (for 1/4 bore)

77-011/1 3/8 BSP(F) swivel (for 3/8 bore)

77-017/1 1/4 NPSM(F) swivel (for 1/4 bore)


77-050/38 1/4 BSP(F) stainless steel nipple. Black nut. Nickel body (for 3/16 bore)


30

section two


Couplings and adaptors PLEASE NOTEWhere stated swivel nut these are not high-pressure swivels. Where a high pressure swivel isrequired order a 70 or 79 series item - see page 28. All swivel nuts in this section do not swivelonce tightened down. MWP 500bar unless otherwise stated.

BSP Male x BSP Male 74-001/1 1/4 BSP(M) x 1/4 BSP(M)

74-001/30 1/4 BSP(M) x 1/4 BSP(M) stainless

74-002/1 1/4 BSP(M) x 3/8 BSP(M)


74-003/1 3/8 BSP(M) x 3/8 BSP(M)


74-004/1 3/8 BSP(M) x 1/2 BSP(M)


74-005/1 1/2 BSP(M) x 1/2 BSP(M)


NPSM/NPT Male x NPSM/NPT Male 74-010/1 1/4 NPT(M) short x 3/8 NPT(M) W

74-011/1 1/4 NPT(M) x 1/4 NPT(M)

74-011/30 1/4 NPT(M) x 1/4 NPT(M) stainless

74-012/1 1/4 NPT(M) x 3/8 NPT(M)


74-013/1 3/8 NPT(M) x 3/8 NPT(M)


74-014/1 3/8 NPT(M) x 1/2 NPT(M)

74-015/1 1/2 NPT(M) x 1/2 NPT(M)

NPSM/NPT Male x BSP/BSPT Male 74-062/1 1/4 NPT(M) x 1/4 BSP(M)74-063/1 3/8 NPT(M) x 1/4 BSP (M)

JIC Male x JIC Male 74-021/1 JIC 1/2 x 20(M) x JIC 1/2 x 20(M)

Metric Male x metric Male 74-031/1 M16 x 150(M) x M16 x 150(M)

Metric Male x BSP Male 74-060/1 M16 x 150(M) x 1/4 BSP(M)

Metric Male x NPSM/NPT Male 74-061/1 M16 x 150(M) x 1/4 NPT(M)

74-064/1 M16 x 150(M) x 3/8 NPT(M)74-070/1 M16 x 150(M) x M16 x 150(F) swivel nut

Swivels and Y blocksHIGH PRESSURE STAINLESSSTEEL SWIVELS

The Exitflex ‘Zwivel’ is a precision engineered devicewith innovative seal design. Itis a three axis swivel for usewith high pressure sprayguns and extrusion devicesfor sealing applications. Thedevice weighs less than 100grams with a maximumworking pressure of 550bar.The Zwivel will operate fromlow pressure successfully up

to its maximum pressure. Because of it’s low weightit has a very high operator acceptance rate. It makesgun movement relatively easy in difficult to accessareas

79-101/34 1/4 NPSM(M) x 1/4NPSM(F) 1bar to 550bar 79-102/341/4BSP(M) x 1/4BSP(F) 1 bar to 550bar

High Pressure Stainless Steel Micro Swivel 550bar

The Exitflex micro swivels are highperformance, single axis, swivels witha maximum working pressure of517bar. The items are small at 31mmlong and weighing in at 30 gramseach. They deliver a very highperformance with a low weight

addition to the gun thus reducing operator fatigue.They perform a wide range of applications from paintspray to vibration control.

79-001/34-K5 1/4NPSM(M) x 1/4NPSM(F) 1bar to 550bar.79-002/34-K5 1/4BSP(M) x 1/4BSP x 1/4BSP(F) 1 bar to 550bar.

70 series High Pressure Swivels 517barThis well known range of Exitflex swivels can befound throughout the spray painting world. Designedfor ease of use, long service and reliable performanceit has been adopted by famous OEM equipment

suppliers for use with their own equipment ranges.The 70 series swivels are designed for 517bar MWPand are available in the following range of popularsizes. Carbon steel is the standard range with astainless steel option for the NPS model.

70-110/ 2 1/4BSP(F) x 1/4BSP(M) MWP517bar

70-220/ 2 1/4NPS(F) x 1/4NPM MWP517bar

70-220/34 1/4NPS(F) x 1/4NPM s/steel MWP517bar

70-290/1 1/4NPSM(M) x M14x1(M) MWP517bar

70-440/2 3/8BSP(M) x 3/8BSP(F) MWP517bar

70-550/2 3/8 NPSM(M) x 3/8 NPSM(F) MWP517bar

70-520/2 3/8 NPSM(M) x 1/4NPSM(F) MWP517bar

70-900/1 1/4NPSM(M) x M18x1.5(M) MWP517bar

HIGH PRESSURE RECIRCULATIONY BLOCKS 400bar MWP

Stainless steel recirculation Yblocks are designed forrecirculation of paints when hotspray systems or recirculation isrequired in the fluid lines. They arelow weight, built in 304 stainlesssteel and are pressure rated at400bar maximum working pressure.Standard models are as listed. (Donot use low pressure Y blocks whichwill be seen in a later section of thisbrochure.)

74-811/30

2 inlets 1/4BSP(M) x 1 outlet 1/4BSP(F).

74-822/30

2 inlets 1/4NPSM (M) x 1 outlet 1/4NPSM(F)

74-855/30

2 inlets 3/8 NPSM(M) x 1 outlet 3/8 NPSM(F)

74-888/30

2 inlets M16 x 1.5(M) x 1 outlet M16x1.5(F)

550bar

32

section two

33

Couplings and adaptors


JIC Male x BSP Female 74-055/1 JIC 1/2 x 20(M) x 1/4 BSP(F) swivel nut74-056/1 JIC 3/4 x 16(M) x 3/8 BSP(F) swivel nut74-057/1 JIC 1/2 x 20(M) x 3/8 BSP(F) swivel nut

JIC Male x NPSM Female 74-051/1 JIC 1/2 x 20(M) x 1/4 NPSM(F) swivel nut74-052/1 JIC 3/4 x 16(M) x 3/8 NPSM(F) swivel nut74-058/1 JIC 1/2 x 20(M) x 3/8 NPSM(F)nut

JIC Male x Metric Female 74-053/1 JIC 1/2 x 20(M) x M16 x150(F) swivel nut

Metric Male x Metric Female 74-070/1 M16 x 150(M) x M16 x 150(F) swivel nut

Metric Male x BSP Female 74-075/1 M16 x 150(M) x 1/4 BSP(F) swivel nut74-076/1 M16 x 150(M) x 3/8 BSP(F) swivel nut

Metric Male x NPSM Female 74-071/1 M16 x 150(M) x 1/4 NPSM(F) swivel nut74-072/1 M16 x 150(M) x 3/8 NPSM(F) swivel nut

Metric Male x JIC Female 74-073/1 M16 x 150(M) x JIC 1/2 x 20(F) swivel nut

Female x Female 74-151/1 Female union 1/4 BSP(F) x 1/4 BSP(F)74-152/1 Female union 1/4 BSP(F) x 3/8 BSP(F)74-153/1 Female union 3/8 BSP(F) x 3/8 BSP(F)74-161/1 Female union 1/4 NPSM(F) x 1/4 NPSM(F)74-162/1 Female union 1/4 NPSM(F) x 3/8 NPSM(F)74-163/1 Female union 3/8 NPSM(F) x 3/8 NPSM(F)

Elbows & Tees MWP 250bar

78-036/30 3/8 BSP 90° heavy duty 90° elbow, st/steel. 2 x 3/8 BSP(F)78-048/30 3/8 BSP Tee heavy duty 90° elbow, st/steel. 3 x 3/8 BSP(F)78-185/30 1/4 BSP(M/F) compact 90° elbow, stainless steel MWP 20bar

Plugs74-311/1 Plug 1/4 NPT(M)74-313/1 Plug 3/8 NPT(M)74-315/1 Plug 1/2 NPT(M)HP-300-T Plug 1/4 BSPT(M) - stainless steel (not illustrated)

BSP Male x BSP Female 74-080/1 1/4 BSP(M) x 3/8 BSP(F) swivel nut74-080/37 1/4 BSP(M) x 3/8 BSP(F) stainless - plated swivel nut74-088/1 3/8 BSP(M) x 3/8 BSP(F) swivel nut74-088/37 3/8 BSP(M) x 3/8 BSP(F) stainless - plated swivel nut74-089/1 1/4 BSP(M) x 1/4 BSP(F) swivel nut78-159/30 1/4 BSP(M) x 1/4 BSP(F) swivel nut- stainless steel

BSP Male x NPSM Female 74-085/1 1/4 BSP(M) x 1/4 NPSM(F) swivel nut74-086/1 3/8 BSP(M) x 3/8 NPSM(F) swivel nut74-087/1 1/4 BSP(M) x 3/8 NPSM(F) swivel nut74-087/37 1/4 BSP(M) x 3/8 NPSM(F) stainless - plated swivel nut

BSP Male x JIC Female 74-081/1 1/4 BSP(M) x JIC 1/2 x 20(F) swivel nut74-082/1 3/8 BSP(M) x JIC 3/4 x 16(F) swivel nut

BSP Male x Metric Female 74-083/1 1/4 BSP(M) x M16 x 150(F) swivel nut74-084/1 3/8 BSP(M) x M16 x 150(F) swivel nut

NPSM/NPT Male x NPSM Female74-033/1 3/8 NPSM(M) x 1/4 NPSM(F) swivel nut74-034/1 3/8 NPSM(M) x 3/8 NPSM(F) swivel nut74-036/1 3/8 NPT(M) x 1/4 NPSM(F) swivel nut74-037/1 3/8 NPT(M) x 1/2 NPSM(F) swivel nut74-038/1 1/2 NPT(M) x 1/2 NPSM(F) swivel nut74-039/1 1/4 NPT(M) x 1/4 NPSM(F) swivel nut74-040/1 1/4 NPSM(M) x 3/8 NPSM(F) swivel nut74-040/37 1/4 NPSM(M) x 3/8 NPSM(F) stainless

- plated swivel nut

NPT Male x BSP Female 74-035/1 3/8 NPT(M) x 1/4 BSP(F) swivel nut74-045/1 1/4 NPT(M) x 1/4 BSP(F) swivel nut74-046/1 3/8 NPT(M) x 3/8 BSP(F) swivel nut74-047/1 3/8 NPT(M) x 3/8 NPSM(F) swivel nut74-048/1 1/4 NPT(M) x 3/8 BSP(F) swivel nut

NPT Male x JIC Female 74-041/1 1/4 NPT(M) x JIC 1/2 x 20(F) swivel nut74-042/1 3/8 NPT(M) x JIC 3/4 x 16(F) swivel nut

NPT Male x Metric Female 74-043/1 1/4 NPT(M) x M16 x 150(F) swivel nut74-044/1 3/8 NPT(M) x M16 x 150(F) swivel nut

www.exitflex.co.uk34

section two

35

Hose chemical resistance chartHigh pressure needle and ball valves

www.exitflex.co.uk

BALL VALVESBall valves with seals specified for solvent, oils andchemical resistance and are ideal, reliable and easyto use for all those demanding applications where fullflow is required.

78-205/4High pressure ball valve 400bar MWP 1/4 BSP(F) x 1/4 BSP(F)

78-205/34High pressure ball valve 400bar MWP 1/4 BSP(F) x 1/4 BSP(F) stainless steel

78-206/4High pressure ball valve 400bar MWP3/8 BSP(F) x 3/8 BSP(F)

78-218/4High pressure 3 way L ported ball valve 400bar MWP 3 x 3/8 BSP(F)

78-209/34High pressure stainless steel 250bar MWP ball valveforged body 304 stainless steel, long operating leversolvent resistant seals 1/4 BSP(F) x 1/4 BSP(F)

78-210/34High pressure stainless steel 250bar MWP ball valveforged body 304 stainless steel, long operating leversolvent resistant seals 3/8 BSP(F) x 3/8 BSP(F)

78-200/34

78-201/34

78-205/4

78-205/34

78-206/4

78-218/4

78-209/34

78-210/34

NEEDLE VALVESNeedle valves are useful for high pressure air orgradual fluid pressure release.

78-200/341/4 needle shut off valve 2 x 1/4 BSP(F) inletsstainless steel 415bar MWP

78-201/343/8 needle shut off valve 2 x 3/8 BSP(F) inlets.stainless steel 415bar MWP

The Exitflex range of ball and needle valves are excellent quality and designed to meet the requirements of mostpopular applications.

www.exitflex.co.uk

section two

3736

EF179 stainless steel overbraid hose assembliesStandard hose assemblies NPSM female connections both ends Price per assembly

EF179-3.0300.N4 3m assembly 190bar MWP 3/16 £33.40




EF709 Polyamide 12 lined paint spray hoseBulk hose Price per metre

EF709/4 450bar MWP 1/4in £7.79

EF709/6 380bar MWP 3/8in £10.72

EF709/8 300bar MWP 1/2in £12.75

EF709/12 275bar MWP 3/4in £21.00

Standard hose assemblies NPSM female connections both ends Price per assembly

EF709-4.0750.N4 7.5 metre assembly 1/4in £70.69

EF709-4.1500.N4 15 metre assembly 1/4in £129.11






EF709 assemblies are available in any length by enquiry

PA Paint hose rangeBulk hose Price per metre

PA1.2 1 wire 350bar MWP 1/8in £4.50

PA1.3 1 wire 350bar MWP 3/16in £3.40






PA2.8 2 wire 350bar MWP 1/2in £11.60

PA2.12 2 wire 275bar MWP 3/4in £21.00

Standard hose assemblies NPSM female connections both endsPrice per assembly

PA1.2.0300.N4 3 metre assembly 1/8in £24.88

PA1.2.0750.N4 7.5 metre assembly 1/8in £38.64

















PA assemblies are available in any length and with withBSPMetric or JIC fittings by enquiry

TC Multi purpose hose

Bulk hose Price per metre

TC1.2 1 wire 350bar MWP 1/8in £13.18

TC1.3 1 wire 350bar MWP 3/16in £15.08

TC1.4 1 wire 325bar MWP 1/4in £19.56

TC1.6 1 wire 250bar MWP 3/8in £28.00

TC1.8 1 wire 200bar MWP 1/2in £36.76

TC2.8 2 wire 350bar MWP 1/2in £44.66

TC2.12 2 wire 275bar MWP 3/4in £108.28

Standard hose assemblies NPSM female connections both endsPrice per assembly

TC1.4.0750.N4 5 metre assembly 1/4in £158.70


TC1.6.0750.N6 7.5 metre assembly 3/8in £228.00


TC assemblies are available in any length and with with BSP,Metric or JIC fittings by enquiry

WE Safety whip endBulk hose Price per metre

WE.2.3 550bar MWP 3/16in £12.58

WE.2.4 550bar MWP 1/4in £13.00

Standard hose assemblies NPSM female connections both ends

Price per assembly

WE.2.3.0300.N4 3 metre assembly 3/16in £61.06



order ref description bore r.r.p order ref description bore r.r.p


HP thermoplastic hoses & accessoriesprice listorder ref description bore r.r.p order ref description bore r.r.p

AIR ASSISTED AIRLESS TWINNED HOSE ASSEMBLIESColours: KRW blue/red KPW blue/mid blue

KLCW blue/blackStandard hose assemblies NPSM fluid BSP air

Price per assembly

KRW2.3.4.0500.N4B4 5 metre assembly 3/16in £80.98

KRW2.3.4.0750.N4B4 7.5 metre assembly 3/16in £101.52



KPW2.3.4.0500.N4B4 5 metreassembly 3/16in £64.73

KPW2.3.4.0750.N4B4 7.5 metre assembly 3/16in £87.48

KPW2.3.4.1000.N4B4 10 metre assembly 3/16in £104.13

KPW2.3.4.1500.N4B4 15 metre assembly 3/16in £143.53

KLCW2.4.4.1500.N4B4 15 metre conductive assembly 1/4in £258.00

KLCW2.4.4.2000.N4B4 20 metre conductive assembly 1/4in £258.00

Assemblies are available in any length and with with BSP,Metric or JIC fittings by enquiry

SPR standard paint hose assemblies: 4:1 safety NPSM female connections both ends

Price per assembly

SPR230-3.0100.N4. 1 metre assembly 3/16in £9.90

SPR230.4.1500.N4 15 metre assembly 1/4in £30.82

SPR230-6.1500.N6 15 metre assembly 3/8in £54.82

SPR300-4.0750.N4 7.5 metre assembly 1/4in £22.36












HD extra heavy duty hose: 4:1 safetyBulk hose

Price per metre

HD2.4 1 wire 1 aramid 700bar MWP 1/4in £13.64




Standard hose assemblies NPSM female connections both ends

Price per assembly

HD2.4.0750.N4 7.5 metre assembly 1/4in £120.48

HD2.4.1500.N4 15 metre assembly 1/4in £240.46






HD assemblies are available in any length by enquiry

AIR ASSISTED AIRLESS AND AIRLESS HOSESKX/SX textile braided conductive/pulsating hosesBulk hose Price per metre

KX2.3 2 textile braids 235bar MWP 3/16in £4.90

KX2.4 2 textile braids 227bar MWP 1/4in £5.16

SX2.6 2 textile braids 250bar MWP 3/8in £9.14

SX2.8 2 textile braids 250bar MWP 1/2in £15.54

Standard hose assemblies NPSM female connections and spring guards

Price per assembly

KX2.3.0750.N4.1SG 7.5 metre assembly 3/16in £42.48

KX2.3.1000.N4.1SG 10 metre assembly. 3/16in £68.56

KX2.4.1500.N4.2SG. 15 metre assembly 1/4in £88.64

SX2.6.1500.N6 15 metre assembly 3/8in £87.44



KX and SX assemblies are available in any length and with withBSP, Metric or JIC fittings by enquiry

DP1.3 3/16 bore drain cleaning hose 250barConnections 1/4 BSP female x short 1/8 BSP maleStandard hose assemblies Price per assembly

DP1.3.0700.B2B4 7m assembly 1/8m x1/4F 3/16 £53.00

DP1.3.1000.B2B4 10m assembly 1/8m x1/4F 3/16 £75.50

DP1.3.1500.B2B4 15m assembly1/8m x1/4F 3/16 £108.80

DP1.3.2000.B2B4 20m assembly1/8m x1/4F 3/16 £154.40

section two

3938 www.exitflex.co.uk


77-042/1 1/4 NPSM (F) swivel for 1/8in bore hose £11.00

77-050/2 1/4 BSP(F) swivel for 3/16in bore hose £10.10

77-050/38 1/4 BSP(F) stainless insert nickel platednut nickel body for 3/16in bore hose £19.70

77-052/2 1/4 NPSM(F) swivel for 3/16in bore hose £10.10

Swivels and Y blocks

70 series High pressure swivels 517bar 70-110/2 1/4 BSP(M) x 1/4 BSP(F) £36.20

70-220/2 1/4 NPS(M) x 1/4 NPSM(F) £36.20

70-220/34 1/4 NPS(M) x 1/4 NPSM(F) stainless steel £46.62

70-290/1 1/4 NPS(M) x M14 x1(M) £46.62

70-440/2 3/8 BSP(M) x 3/8 BSP(F) £46.62

70-550/2 3/8 NPS(M) x 3/8 NPSM(F) £46.62

70-520/1 3/8 NPS(M) x 1/4 NPSM(F) £46.62

70-900/1 1/4 NPS(M) x M18 x1.5(M) (Ran-Gema) £46.62

High pressure stainless steel Z swivel 550bar 79-101/34 1/4 NPSM(M) x 1/4 NPSM(F) £203.00

79-102/34 1/4 BSP(M) x 1/4 BSP(F) £203.00

High pressure stainless steel micro swivels 550barPrice per pack

79-001/34-K5 Pack of 5 1/4 NPSM M/F £163.00

79-002/34-K5 Pack of 5 1/4 BSP M/F £163.00

Y blocks 400bar 2 inlets 1 outlet

74-811/30 1/4 BSP(M) 1/4 BSP(F) £84.99

74-822/30 1/4 NPSM(M) 1/4 NPSM(F) £84.88

74-855/30 3/8 NPSM(M) 3/8 NPSM(F) £84.88

74-888/30 M16 x 1.5(M) M16 x 1.5(F) £84.88

Use only 74 - 8xx series for high pressure applications.

Couplings & adaptors BSP Male x BSP Male74-001/1 1/4 BSP(M) x 1/4 BSP(M) £3.60

74-001/30 1/4 BSP(M) x 1/4 BSP(M) stainless £7.50

74-002/1 1/4 BSP(M) x 3/8 BSP(M) £3.99


74-003/1 3/8 BSP(M) x 3/8 BSP(M) £3.99

74-003/30 3/8 BSP(M) x 3/8 BSP(M) stainless. £9.44

74-004/1 3/8 BSP(M) x 1/2 BSP(M). £3.99


74-005/1 1/2 BSP(M) x 1/2 BSP(M) £4.29


NPT Male x NPT Male74-010/1 1/4 NPT(M) short x 3/8 NPT(M) W £4.49

74-011/1 1/4 NPT(M) x 1/4 NPT(M) £3.60

74-011/30 1/4 NPT(M) x 1/4 NPT(M) stainless £8.64

74-012/1 1/4 NPT(M) x 3/8 NPT(M) £3.99


74-013/1 3/8 NPT(M) x 3/8 NPT(M) £3.99


74-014/1 3/8 NPT(M) x 1/2 NPT(M) £4.49

74-015/1 1/2 NPT(M) x 1/2 NPT(M) £4.49

NPT Male x BSP Male74-062/1 1/4 NPT(M) x 1/4 BSP(M) £3.99

74-063/1 3/8 NPT(M) x 1/4 BSP(M) £3.99

JIC Male x JIC Male74-021/1 JIC 1/2 x 20(M) x JIC 1/2 x 20(M) £3.60

Metric Male x Metric Male74-031/1 M16 x 150(M) x M16 x 150(M) £3.60

Metric Male x BSP Male74-060/1 M16 x 150(M) x 1/4 BSP(M) £5.89

Metric Male x NPT Male74-061/1 M16 x 150(M) x 1/4 NPT(M) £5.89

74-064/1 M16 x 150 £4.80

BSP Male x BSP Female 74-080/1 1/4 BSP(M) x 3/8 BSP(F) swivel nut £4.86

74-080/37 1/4 BSP(M) x 3/8 BSP(F) stainless black swivel nut £9.54

74-088/1 3/8 BSP(M) x 3/8 BSP(F) swivel nut £4.86

74-088/37 3/8 BSP(M) x 3/8 BSP(F) stainless - plated swivel nut £9.54

74-089/1 1/4 BSP(M) x 1/4 BSP(F) swivel nut £4.86

78-159/30 1/4 BSP(M) x1/4 BSP(F) swivel nut st/st £12.90

BSP Male x NPSM Female74-085/1 1/4 BSP(M) x 1/4 NPSM(F) swivel nut £4.86

74-086/1 3/8 BSP(M) x 3/8 NPSM(F) swivel nut £4.86

74-087/1 1/4 BSP(M) x 3/8 NPSM(F) swivel nut £4.86

74-087/37 1/4 BSP(M) x 3/8 NPSM(F) stainless- plated swivel nut £9.54

BSP Male x JIC Female74-081/1 1/4 BSP(M) x JIC 1/2 x 20(F) swivel nut £4.86

74-082/1 3/8 BSP(M) x JIC 3/4 x 16(F) swivel nut £4.86

BSP male x Metric Female74-083/1 1/4 BSP(M) x M16 x 150(F) swivel nut £4.86

74-084/1 3/8 BSP(M)xM16 x 150(F) swivel nut £4.86

www.exitflex.co.uk


High pressure inserts75-001/1 1/4 BSP(F) swivel s/pl 19 £3.15

75-001/37 1/4 BSP(F) stainless black nut £8.20

75-003/1 1/4 BSP(F) swivel 3/8) £3.95

75-007/1 3/8 BSP(M) (3/8) £3.95

75-008/1 3/8 BSP(F) swivel (1/4) £3.95

75-009/1 1/4 BSP(M) (1/4) £3.25

75-010/1 3/8 NPSM(F) swivel (1/4) £3.95

75-011/1 3/8 BSP(F) swivel (3/8) £3.95

75-011/37 3/8 BSP(F) stainless steel £9.45

75-012/1 1/4 NPT(M) (1/8) £3.95

75-013/1 1/4 NPT(M) (3/16) £3.20

75-014/1 1/4 NPS(M) (1/8) £3.85

75-015/1 1/4 NPS(M) (3/16) OBS £3.85

75-017/1 1/4 NPSM(F) swivel (1/4) s/pl 19 £3.95

75-017/37 1/4 NPSM(F) stainless steel black nut £8.45

75-018/1 1/4 NPSM(F) swivel (1/4) s/pl 17 £8.20

75-019/1 1/4 NPSM(F) swivel (3/8) s/pl 19 £3.95

75-020/1 1/4 NPT(M) (1/4) £3.25

75-026/1 3/8 NPSM(F) swivel (3/8) £3.95

75-026/37 3/8 NPSM(F) in stainless steel black nut £9.45

75-030/1 3/8 NPT(M) (3/8) £3.95

75-032/1 M16 x 150(F) swivel (1/4) £3.95

75-032/37 M16 x 150(F) in stainless steel black nut £8.20

75-034/1 M16 x 150(F) swivel (3/8) £3.95

75-036/1 JIC 1/2 x 20(F) swivel (1/4) £3.95

75-037/1 1/8 BSP(F) swivel (1/8) £4.95

75-040/1 1/4 BSP(F) swivel (1/8) £4.95

75-042/1 1/4 NPSM(F) swivel (1/8) s/pl 19 £4.95

75-042/37 1/4 NPSM(Fin stainless steel black nut £8.45

75-043/1 1/4 NPSM(F) swivel (1/8) s/pl 17 £4.95

75-044/1 JIC 1/2 x 20(F) swivel (1/8) £4.95

75-045/1 1/8 NPSM(F) swivel (1/8) £4.95

75-046/1 M16 x 150(f) swivel (1/8) £4.95

75-048/1 1/8 BSP(M) (1/8) s/pl 10 £4.95

75-049/1 1/4 BSP(M) (1/8) £4.95

75-050/1 1/4 BSP(F) swivel 3/16 s/pl 19 £3.95

75-050/37 1/4 BSP(F) in stainless steel black nut £9.45

75-052/1 1/4 NPSM(F) swivel (3/16) s/pl 19 £3.95

75-052/37 1/4 NPSM(F) in stainless steel £9.45

75-053/1 1/4 NPSM(F) swivel (3/16) s/pl.17 £3.95

75-054/1 JIC 1/2 x 20(F) swivel (3/16) £3.95

75-056/1 M16 x 150(F) swivel (3/16) £3.95

75-056/37 ditto in stainless steel £9.45

75-057/1 M16 x 150(M) (3/16) £3.25

75-059/1 1/4 BSP(M) (3/16) £3.25

75-067/1 1/8 NPT(M) (3/16) £3.95

75-075/1 JIC 1/2 x 20(M) (3/8) £4.95

75-081/1 1/2 NPSM(F) swivel (1/2) £5.95

75-082/1 1/2 BSP(F) swivel (1/2) £5.95

75-085/1 1/2 NPT(M) (1/2) £5.95

75-089/1 1/2 BSP(M) (1/2) £5.95

75-111/1 3/4 NPT(M) (3/4) (not for HD.2.12) £12.50

75-112/1 3/4 NPSM(F) swivel (3/4) (not for HD.2.12) £12.50

75-202/1 round 1/8 BSP(M) (1/8) £3.40

75-203/1 round 1/8 BSP(M) (3/16) £3.40

75-211/1 round 1/8 BSP(M) long (3/16) £3.40

75-258/30 round 1/8 BSP(M) (3/16) short stainless £4.70

High pressure swage ferrules75-800/51 F1.2 app KX 1.2 / PA.1.2 / TC.1.2 £2.20

75-803/51 F1.2 app EF179.3 £2.20

75-805/51 F1.3 app PA.1.3 / TC.1.3 £2.20

75-806/51 F2.3 app KX.2.3 / WE.2.3 / EF179.4 £2.20

75-808/51 F1.3 app DP.1.3 only (short) £2.20

75-810/51 F1.4 app PA.1.4 /TC.1.4 / SYT.1.4 £2.20

75-812/51 F2.4 app PA.2.4 /HD.2.4 / EF709.4 WE 2.4 £2.20

75-815/51 F2.4 app KX.2.4 £2.45

75-820/51 F.1.6 app PA.1.6 / TC.1.6 £2.45

75-826/51 F2.6 app EF709.6 / PA.2.6 / SYT.2.6 HD.2.6 £2.45

75-830/51 F1.8 app PA.1.8 / TC.1.8 £2.45

75-835/51 F2.8 app EF709.8 / PA.2.8 / TC.2.8 HD.2.8 £2.4575-848/51 F2.12 app EF709.2.12/PA.2.12 / TC.2.12 £10.45

75-860/51 F1.4 app PAM.1.4 £2.20

75-870/51 F1.6 app PAM.1.6 £2.20

Insert & ferrule sets for 3/4 hose

34312B12F 3/4 BSP(F) swivel (not for HD.2.12) £14.50

34312N12F 3/4 NPSM(F) swivel (not for HD.2.12) £14.50

35012B12F 3/4 BSP(F) swivel nut (for HD.2.12) £21.59

35012N12F 3/4 NPSM(F) swivel (for HD.2.12) £21.59

Reuseable high pressure connectionsfor single wire braided hoses77-001/2 1/4 BSP(F) swivel for 1/4in bore hose £10.10

77-001/38 1/4 BSP(F) stainless insert nickel platednut nickel body £19.70

77-011/1 3/8 BSP(F) swivel for 3/8 in bore hose £19.70

77-017/2 1/4 NPSM(F) swivel for 1/4in bore hose £10.10

HP thermoplastic hoses & accessoriesprice list

section three

41

Low pressure hoses and accessories

Air hose range page 42

Fluid hose range page 44

Tubing hose range page 45

Tubing connectors page 45

Reusable hose connectors page 46

QD air and fluid connectors page 47

Hose inserts page 47

Re-circulating Y blocks page 48

LP connectors page 49

Hose accessories page 50

Turbine hoses page 50

Price list page 51



During the last thirty years Exitflex have developed a range of high

performance low pressure hose products for paint and compressed air

use. The very well known and respected LPV fluid hoses are joined by

the conductive LPC series hoses which can be found meeting the

needs of industrial, aerospace and automotive users across the world.

New product developments have seen customer driven needs met to

fulfil specific demands. The hose range is supported by an important

range of well designed accessories.

40

NPS/NPT Male x NPSMFemale74-033/1 3/8 NPS(M) x 1/4 NPSM(F) swivel nut £4.80

74-034/1 3/8 NPS(M) x 3/8 NPSM(F) swivel nut £4.80

74-036/1 3/8 NPT(M) x 1/4 NPSM(F) swivel nut £4.80




74-040/1 1/4 NPS(M) x 3/8 NPSM(F) swivel nut £4.80

74-040/37 1/4 NPS(M) x 3/8 NPSM(F) stainless plated swivel nut £10.52

NPT Male x BSP Female74-035/1 3/8 NPT(M) x 1/4 BSP(F) swivel nut £4.80

74-045/1 1/4 NPT(M) x 1/4 BSP(F) swivel nut £4.64




NPT Male x JIC Female74-041/1 1/4 NPT(M) x JIC 1/2 x 20(F) swivel nut £4.86

74-042/1 3/8 NPT(M) x JIC 3/4 x 16(F) swivel nut £4.86

NPT Male x Metric Female74-043/1 1/4 NPT(M) x M16 x 150(F) swivel nut £4.86

74-044/1 3/8 NPT(M) x M16 x 150(F) swivel nut £4.86

JIC Male x BSP Female74-055/1 JIC 1/2 x 20(M) x 1/4 BSP(F) swivel nut £5.98

74-056/1 JIC 3/4 x 16(M) x 3/8 BSP(F) swivel nut £5.98

74-057/1 JIC 1/2 x 20(M) x 3/8 BSP(F) swivel nut £5.98

JIC Male x NPSM Female74-051/1 JIC 1/2 x 20(M) x 1/4 NPSM(F) swivel nut £5.98

74-052/1 JIC 3/4 x 16(M) 3/8 NPSM(F) swivel nut £5.98

74-058/1 JIC 1/2 x 20(M) x 3/8 NPSM(F) nut £5.98

JIC Male x Metric Female74-053/1 JIC 1/2 x 20(M) x M16 x 150(F) swivel nut £5.98


www.exitflex.co.uk

HP thermoplastic hoses & accessoriesprice list

Metric Male x Metric Female74-070/1 M16 x 150(M) x M16 x 150(F) swivel nut £4.86

Metric Male x BSP Female74-075/1 M16 x 150(M) x 1/4 BSP(F) swivel nut £4.86

74-076/1 M16 x 150(M) x 3/8 BSP(F) swivel nut £4.86

Metric Male x NPSM Female74-071/1 M16 x 150(M) x 1/4 NPSM(F) swivel nut £4.86

74-072/1 M16 x 150(M) x 3/8 NPSM(F) swivel nut £4.86

Metric Male x JIC Female74-073/1 M16 x 150(M) x JIC 1/2 x 20(F)

swivel nut £4.86

Female x Female74-151/1 female union 1/4 BSP(F) x 1/4 BSP(F) £7.46

74-152/1 female union 1/4 BSP(F) x 3/8 BSP(F) £7.46

74-153/1 female union 3/8 BSP(F) x 3/8 BSP(F) £7.58

74-161/1 female union 1/4 NPSM(F) x 1/4 NPSM(F) £7.10



Elbows and tees - stainless steel78-036/30 3/8 BSP 90° elbow 2 x 3/8 BSP(F) £13.90

78-048/30 3/8 BSP Tee 3 x 3/8 BSP(F) £24.48

78-185/30 1/4 BSP(M/F) compact elbow £23.50

Plugs74-311/1 plug 1/4 NPT(M) £3.24

74-313/1 plug 3/8 NPT(M) £3.24

74-315/1 plug 1.2in NPT(M) £ 3.24

HP-300-T 1/4BSPT stainless steel £10.16

High pressure needle and ball valves 78-209/30 1/4in F forged ball valve 250bar MWP £62.75

78-210/30 3/8in F forged ball valve 250bar MWP £74.50

78-200/34 1/4in F needle valve 415bar MWP £36.00

78-201/34 3/8in F needle valve 415bar MWP £40.00

78-205/4 1/4in F ball valve 400bar MWP £26.50



78-218/4 3/8in F 3 way L port ball valve 400bar £80.00

Note: /30 & 34 = stainless steel /4 = carbon steel

42

section three

43

AIR HOSE RANGENon conductive air hoses

AB breathing air hose solvent resistantAB is a reinforced breathing air hose, of PE alloyconstruction without toxic bonding agents. The hosefeatures a clear FDA approved inner tube, a bluecover produced from a blend of PE providingexcellent abrasion and solvent resistance. The hoseis available in 8mm and 10mm bore with excellentflexibility and mechanical strength.

AL general purpose PVC hoseGeneral purpose top quality reinforced PVC with redcover and clear FDA approved liner. The hose is freefrom toxic bonding, flexible and light.

RA rubber alloy air hose RA air hose is constructed from a very soft feel hybridmaterial blended from rubber and thermoplasticcomponents. The hose is lighter than standard rubberand has a role to play where low weight and a veryflexible product is needed. RA is widely used in re-finishing applications and is also well suited inengineering workshop. RA should not be left in bakingovens during the heating cycle. (Colour, brick red.)

RPUA reinforced PU hose RPUA is designed for compressed air duty. It ismanufactured from a sturdy and very durablePolyurethane blend with excellent solvent tolerance.RPUA has a long life, great flexibility and is very easy

Low pressure air hosesto clean. It has proved to be very effective in theautomotive sector. The easy clean nature andreduced OD has seen great operator acceptance.The low weight also reduces operator fatigue.(Colour,red.) A comprehensive range of re-useableconnectors is available. )

Conductive and anti static air hoses

ABC breathing air hose Breathing air hose for use in Atex, class 2 locations.The hose has a black conductive PU cover, nylonlining and is reinforced . The hose has pull strengthand good flexibility.

AC general purpose PU hoseA general purpose, flexible PU/PU, reinforced hosefor general purpose duty. Ideal where class 2 Atexcompliance is specified. AC has a black conductivePU cover. Clear inner.

RR anti-static rubber air hose red RR is a multi purpose rubber hose suitable for usewith oil, water and compressed air. It is heavier thanRA, but is very hard wearing and versatile. The hoseincorporates an imbedded copper anti static wire.(Colour brick red.)

BR anti-static rubber air hose blackBR a black rubber hose with a static conducting,smooth, hard wearing cover SBR/NBR rubber lining,reinforcement is by polyester cord conforming to BS5118/2 and ISO 2398 type4 class A.

Electrical resistance >10-16 ohms/m (BS2050). Temp range -30ºC/+80ºC.MWP 20bar


Type Ref Application / Colour IDmm ODmm MWP bar Coil Size Build

AB 1.5/100 Breathing air hose Blue 8 14 18 30 & 100m Reinf PE alloy

AB 1.6/100 Breathing Air Hose Blue 10 16 18 100m Reinf PE alloy

ABC 1.5 Breathing air hose Black 8 15 20 per metre Reinf PU/PA Conductive

AL 1.4/100 Air Hose Red 6.3 13 18 100m Reinf PVC

AL 1.5/30 Air Hose Red 8 14 18 30m Reinf PVC

AL 1.5/100 Air Hose Red 8 14 18 100m Reinf PVC

AC 1.5 Air Hose Conductive Black 8 14 18 per metre Reinf PU/PU

BR.1.5/100 Anti Static air hose Black 8 16 20 100m Reinf Rubber NBR/SBR

BR.1.6/100 Anit Static air hose Black 9.6 18 20 100m Reinf Rubber NBR/SBR

RA 1.5/100 Air Hose Brick Red 8 14 20 100m Reinf Rubber Alloy

RPUA 1.4/30 Lightweight air hose Red 6.3 11 18 30m Reinf PU/PU

RPUA 1.5/30 Lightweight air hose Red 8 12 18 30m Reinf PU/PU

RPUA 1.5/100 Lightweight air hose Red 8 12 18 100m Reinf PU/PU

RR 1.5/100 Air hose Anti static Brick Red 8 16 20 100m Reinf Rubber

Air hose data chart

The Exitflex low pressure range of air and fluid hoses are designed fora wide range of industrial and automotive applications.

Hoses for most applications will be found in this programme.Hoses are available as assemblies or as bulk hose

refer price list pages 51 to 54

44

section three

45

FLUID HOSE RANGEExitflex fluid hoses are available in bulk or asassemblies as described on this page and the pricelist on page 51

Automotive rangeLF hose features an FEP140 liner for applicationswhere coatings demand Teflon, or a hose withoutmoisture present in the inner tube, essential inmoisture cure applications. This hose fast cleans forcolour change. (Colour, clear translucent.)

LM hose features a polyamide 6 liner for excellentsolvent resistance. Ideal in the automotive paintingindustry. Wall thickness is minimal making it light andflexible (Colour, clear translucent).

LX hose is a smaller bore hose designed in particularfor re-circulating, automotive duty with a PA12 liner.The cover is a clear PU The hose is very flexible.(Colour, clear translucent.)

MA is a non reinforced co-extruded hose with a PA6liner and a clear PU cover. The small OD is popular.(Colour, Natural.)

Industrial Range The Exitflex range of fluid hoses are suited to a wideselection of industrial finishing applications.

LPC hose is conductive and ATEX compliant. This isa development of the original well known and widelyused LPV type hose. The difference is the conductivecover. (Colour, black.)

LPV hose is non conductive and widely accepted inpainting applications in environments where theexplosion risk is low or not present. The hose isdesigned for hard use and to carry industrial solventsbut is not suitable for immersion in solvents. Theconstruction with PU gives these hoses friction andkink resistant characteristics. (Colour, black)

SR suction hose is constructed from rubber with adouble textile braid and a polyamide inner liner. SRhose has the strength to resist vacuum withoutcollapse. This product can also be employed as apressure hose up to 500psi. (Colour, black.)

VOW twinned hose has an atomising air hosewelded to a fluid hose to provide the user with a neatassembly. The air hose is PU with a polyamide linedLPV fluid hose. (Colours black and red.)

CSP powder hose is for use with manual andautomatic powder coating spray guns. The clear PVCis designed to provide a low static performance andexcellent transport of the powder to the applicator.(Colour,clear natural.)

Further details on the chart below

Type ref Application / Colour ID mm OD mm MWP bar Unit

LF 1.4 Fluid Hose FEP liner/Tr 6.3 13 20 per metre

LF 1.6 Fluid Hose FEP liner/Tr 9.6 16 15 per metre

LM 1.4 Fluid Hose PA11 liner/Tr 6.3 11 20 per metre

LM 1.6 Fluid Hose PA11 liner/Tr 9.6 14 14 per metre

LX 1.3 Fluid Hose PA11 liner/Tr 4 10 50 per metre

MA 1.4 Fluid Hose PA liner/Tr Bk Rd 6.3 11 8 per metre

LPC 1.4 Fluid Hose (Conductive) Black 6.3 12 20 per metre

LPC 1.6 Fluid Hose (Conductive) Black 9.6 15 15 per metre

LPC 1.8 Fluid Hose (Conductive) Black 13 22 15 per metre

LPV1.4 Fluid Hose Black 6.3 13 15 per metre

LPV 1.6 Fluid Hose Black 9.6 16 15 per metre

SR 1.12 Suction Hose Black 19 28 34 per metre

SR 1.16 Suction Hose Black 25 38 34 per metre

VOW 1.4.5 Fluid and air twin hose Bk/Rd 6.3 & 8 13 & 12 15 &18 per metre

CSP Powder hose static clear PVC 12.5 18 10 per metre

TUBINGNylon, Polyethylene, PTFE and FEP140 tubing isavailable. Nylon tubing can be supplied in othercolours to order. A selection of re-useable swivel nut,

Type ref Colour ODmm IIDmm MWPpsi Coil size Material

ENF 4/25 Natural 4 2.5 400 30m Nylon 11

ENF 5/3 Natural 5 3 435 30m Nylon 11





PTFE 4/25 Natural 4 2.5 250 25m PTFE

PTFE 6/4 Natural 6 4 218 25m PTFE




FEP 4/2 Natural 4 2 250 50m FEP140



FEP 10/8 Natural 10 8 109 50m FEP140

FEP 12/10 Natural 12 10 72 50m FEP140

EPF 6/4 Natural 6 4 180 30m Polyethylene




spring guard connections are also available for thepopular metric tubing sizes up to 10mm OD. Further details on the chart below

RE-USABLE TUBING CONNECTIONS These connections feature a loose nut and 60 degreecone seat. Connectors are available in 3/8 and 1/4BSP and NPSM forms. The wetted section isstainless steel 304 and the ferrule and nut are nickelplated brass. They are supplied with a spring guard.Type Ref Description

76-032/39 1/4 BSP (F) for 6x4mm tubing


76-031/39 1/4 NPSM (F) for 6x4mm tubing










78-185/39 Compact elbow 1/4 BSP(F) x 1/4 BSP(M) 78-185/39

Low pressure fluid hoses


Hose tubing and re usable connectors

46

section three

47

Low pressure hose accessoriesREUSABLE CONNECTIONS FORAIR AND FLUID HOSESType Ref Connection Hose For Hose Type

Bore

76-221/39 1/4 NPSM (F) 3/16 LX1.3

76-222/39 1/4 BSP (F) 3/16 LX1.3

76-236/39 M16x1.5 (F) 3/16 LX1.3

76-238/39 3/8 NPSM (F) 3/16 LX1.3

76-239/39 3/8 BSP (F) 3/16 LX1.3

76-341/39 1/4 NPSM (F) 1/4 LM, MA, MF, MO & RPUA1.4

76-342/39 1/4 BSP (F) 1/4 as above

76-343/39 M14 x 1 (F) 1/4 as above

76-358/39 3/8 NPSM (F) 1/4 as above

76-359/39 3/8 BSP (F) 1/4 as above

76-303/31 Spring guard 300 series body (above)

76-441/39 1/4 NPSM (F) 1/4 AL, LPC & LPV1.4

76-442/39 1/4 BSP (F) 1/4 as above

76-458/39 3/8 NPSM (F) 1/4 as above

76-459/39 3/8 BSP (F) 1/4 as above

76-561/39 1/4 NPSM (F) 5/16 as above

76-562/39 1/4 BSP (F) 5/16 as above

76-511/39 1/4 NPSM (F) 5/16 AL, RA, LPC & LPV1.5

76-512/39 1/4 BSP (F) 5/16 as above

76-570/6 1/4 BSP (M) 5/16 as above

76-578/39 3/8 NPSM (F) 5/16 as above

76-579/39 3/8 BSP (F) 5/16 as above

76-688/39 3/8 NPSM (F) 3/8 AB, LPC LPV1.6

76-689/39 3/8 BSP (F) 3/8 as above

76-691/39 1/4 NPSM (F) 3/8 as above

76-692/39 1/4 BSP (F) 3/8 as above

76-761/39 1/4 NPSM (F) 5/16 MA, MO, RPUA LM & LMC1.5

76-762/39 1/4 BSP (F) 5/16 as above

76-778/39 3/8 NPSM (F) 5/16 as above

76-779/39 3/8 BSP (F) 5/16 as above

76-888/39 3/8 NPSM (F) 3/8 MA, MO & RPUA1.6

76-889/39 3/8 BSP (F) 3/8 as above

76-891/39 1/4 NPSM (F) 3/8 as above

76-892/39 1/4 BSP (F) 3/8 as above

QUICK DETACH FLUID COUPLINGQuick detach low pressure hi-flo fluid coupling.Fully stainless steel, easy to operate, high flow rate.Stems & coupling available separately.

78-311/34 Fluid QD coupling - new designfeaturing hexagon body 3/8 BSP (M)

78-312/34 Male stem for above featuring loosenut 3/8BSP (F)

NUTS & TAILS PACKS / O CLIPSC-13-K10 O clip for 12.5mm OD hose (Pack 10)

C-14-K10 O clip for 14.0mm OD hose (Pack 10)



NTK-1404-K10 Kit of ten 1/4 BSP brass nuts and

tails for 1/4in bore hose

NTK-1405-K10 Kit of ten 1/4 BSP brass nuts and

tails for 5/16in bore hose

NTK-1406-K10 Kit of ten 1/4 BSP brass nuts and SS

stainless steel tails for 3/8in bore hose





QUICK DETACH HI-FLO AIRCOUPLING & TAILS50-401 Quick detach double acting coupling

1/4 BSP male (Plastic sleeve)

50-402 Quick detach double acting coupling9mm hose tail (Plastic sleeve)

50-407 Quick detach hi-flo air Euro coupling 1/4 BSP (M) connection

50-408 QD Euro air connection plug 1/4 BSP(F)

50-409 QD Euroair connection plug 1/4 BSP (M)

50-410 QD Euro air connection plug 9mm tail connection

50-418 QD air connection plug for 6mm borehose

50-427 Quick detach hi-flo air Euro coupling9mm tail connection

50-437 Quick detach hi-flo air Euro coupling 1/4 BSP (F) connection

50-447 QD Euro air coupling 1/2 BSP M

50-417 QD air valve 1/8 BSP (M) connection

QUICK DETACH HI-FLOW AIR BALLSWIVEL CONNECTIONS80-110 Quick detach hi-flow air ball

swivel1/4BSP (M) Euro coupling

80-115 Quick detach hi-flow air ballswivel1/4BSP (F) Euro coupling

pl

78-311/34

50-427

50-407

50-409

80-110

80-115

50-408

78-312/34


48

section three


Low pressure hose accessories

Y blocks are designed for use with spray guns incirculating systems. In particular, the use of a Y blocksystem reduces the risk of contamination in the hoses.caused by poor re-circulation . The Exitflex low pressurerange covers simple Y blocks to more complex unitsfeaturing flow restrictors, also the option of a non returnvalve model to improve function when a colour changemay be needed. The working pressure range (20bar)meets the needs of conventional and electrostatic airatomising guns.

Aluminium Non Restrictor 74-941/27 2 1/4 BSP (M) x 1 3/8 BSP (F)74-944/27 2 3/8 BSP (M) x 1 3/8 BSP (F)74-305/27 3/8 BSP (F) x 2 1/4 BSP (M)74-306/27 3/8 BSP (F) x 2 3/8 BSP (M)

Aluminium Bottom Restrictor74-711/27 2 x 1/4 BSP (M) x 1 3/8 BSP (F)74-744/27 2 x 3/8 BSP (M) x 1 3/8 BSP (F)

Aluminium & Stainless Steel Side Restrictors78-145/27 2 x 1/4 BSP (M) x 1 3/8 BSP (F)78-146/27 2 x 3/8 BSP (M) x 1 3/8 BSP (F)78-145/30 2 x 1/4 BSP (M) x 1 3/8 BSP (F) **Stainless steel special order only

Aluminium 300 Series Non ReturnSuitable for ‘Pro HD’ spray guns

74-340/27 1 M12x1 (M ) x 2 1/4 BSP (F)Suitable for ‘GTI HD’ spray guns 74-341/2 1 UNF) (M) x 2 1/4 BSP (F)Suitable for most production spray guns74-342/27 1 3/8 BSP (F) x 2 1/4 BSP (M) Suitable for ‘Advance HD’ spray guns74-343/27 1 3/8 BSP (F) x 2 3/8 BSP (M) Suitable for ‘Compact’ spray guns74-344/27 1 1/4 BSP (F) x 2 1/4 BSP (M) Suitable for ‘Pro’ spray guns74-345/27 1 M12 x 1 (M) x 2 1/4 BSP (F)

Stainless Steel Centre Restrictor74-541/30 1 3/8 BSP (F) x / 2 x 1/4 BSP (M) 74-544/30 1 3/8 BSP (F) x / 2x 3/8 BSP (M)74-555/30 1 3/8 NPSM (F) x / 2x 3/8in NPSM (M)

Single Line Fluid Restrictor 78-134/30 Stainless steel 3/8 (M) 3/8 (F) These devices are used to permit a conventional orcompliant spray gun to be used without needle travelrestriction which can cause fatigue.

BALL VALVES78-209/15 LP ball valve 1/4 FBE Brass nickel

plated

78-215/15 LP ball valve 3/8 MBE Brass nickelplated

78-216/15 LP ball valve 3/8 FBE Brass nickel plated

MBV.1/4 1/4inBSP(FF) mini ball valve

MBV.3/8 3/8inBSP(MF) mini ball valve

79-049/15 1/4inBSP(MM )microball valve

78-323/30 LP ball valve 1/4 BSP (M). Flat face x1/4 BSP (M). Cone face, PTFE seals, stainless steel


MANIFOLD78-173/30 6 outlet stainless steel manifold

6 x 1/4 BSP(F)MWP 250 bar

LP CONNECTORS74-330 LP 2 outlet air connector Y with ball

valves 1/4 BSP (F) x 2 x 1/4 BSP (M)

74-301.4 LP 3 outlet fluid Y connection, swivelnut 3/8 BSP (F) x 3 x 3/8 BSP fixed incl1 x 3/8 BSP plug

78-174 Dual fluid output or pump by pass. 1 inlet 3/8 BSP 2 outlets 3/8 BSP

74-941/2774-711/27

78-145/27 78-145/30

74-340/27

74-541/30

78-134/30

Y BLOCKS FOR PAINT RECIRCULATION78-209/15

78-215/15

78-216/15

78-324/30

50

section three


Low pressure hoses and accessoriesprice listorder ref description r.r.p order ref description r.r.p

BULK HOSES/TUBINGUnless otherwise indicated, the hoses listed are reinforced and non conductive.

Air HosesAB 1.5/30 30m coil 5/16in bore breathing air hose £65.50

AB 1.5/100 100m coil 5/16in bore breathing air hose £215.00

AB 1.6/100 100m coil 3/8in bore breathing air hose £255.00

AL1.4/100 100m coil PVC air hose 1/4in bore £187.34

AL l.5/30 30m coil PVC air hose 5/16in bore £67.46

AL 1.5/100 100m coil PVC air hose 5/16in bore £217.96

ABC 1.5 5/16in bore £7.50 per metre

AC 1.5 Conductive air hose £7.15m

BR 1.5/100 Anti Static air hose £260.00

BR 1.6/100 Anti static air hose £292.00

RA 1.5/100 100m coil rubber alloy air hose 5/16in bore

£224.74

RPUA 1.4/30 30m coil PUA air hose 1/4in bore £63.88

RPUA 1.5/30 30m coil PUA air hose 5/16in bore £75.12

RPUA 1.5/100 100m coil. PUA air hose 5/16in bore £239.54

RR 1.5/100 100m coil anti static air hose 5/16in bore £281.48

Fluid HosesPrices per metre

LF 1.4 FEP lined hose 1/4in bore £10.96

LF 1.6 FEP lined hose 3/8in bore £15.42

LM 1.4 Clear PU/PA 1/4in bore £5.50

LM 1.6 Clear PU/PA 3/8in bore £8.00

LX 1.3 Clear PU/PA 4mm bore £5.80

MA 1.4 PU/PA unreinf 1/4in bore £3.20

LPC 1.4 Cond PU/PA 1/4in bore £6.22

LPC.1.6 Cond PU/PA 3/8in bore £9.30

LPC 1.8. Cond PU/PA 1/2in bore £10.42

LPV 1.4 Black PU/PA 1/4in bore £5.08

LPV 1.6 Black PU/PA 3/8in bore £8.00

SR1.12 Rubber anti static 3/4in £24.40

SR1 16 Rubber anti static 1in £29.24

VOW 1.4.5 Twin air/fluid £10.20

VAF 1.4.5 Twin assemblies only

CSP 1.8/ 30m static powder/2in £144.00

Tubing (Metric)Nylon 12, Natural** Coloured range available** Enquire

ENF 4/25 30m coils £20.00

ENF 5/3 30m coils £30.20

ENF 6/4 30m coils £33.65

ENF 8/6 30m coils £55.60

ENF 10/8 30m coils £78.14

ENF 12/10 30m coils £95.80

PTFE NaturalPTFE 4/25 25m coils £143.00

PTFE 6/4 25m coils £326.68

PTFE 8/6 25m coils £351.50

PFTE 10/8 25m coils £484.00

PTFE 12/10 25m coils £596.60

FEP 140 NaturalFEP 4/2 50m coils £328.16

FEP 6/4 50m coils £586.44

FEP 8/6 50m coils £735.84

FEP 10/8 50m coils £1155.96

FEP 12/10 50m coils £1657.76

EPF Polyethylene NaturalEPF 6/4 30m coils £18.00

EPF 8/6 30m coils £22.56

EPF 10/8 30m coils £25.68

EPF 12/10 30m coils £28.84

PXC058BK Tube cutter £9.60

HOSE ASSEMBLIES - STANDARD SELECTION (Custom lengths always available to order)

Air HosesCrimped connections. Re useable available by request

AL 1.4.0500 BC4. 5 metre 1/4 BSP FBE £21.20

AL 1.4.0750 BC4 7.5 metre 1/4 BSP FBE £26.30

AL 1.4.1000 BC4 10 metre 1/4 BSP FBE £31.22



AL 1.5.0750 BC4 7.5 metre 1/4 BSP FBE £29.22



AB 1.5.0500 BC4 5 metre 1/4 BSP FBE £29.06

AB 1.5.0750 BC4 7.5 metre 1/4 BSP FBE £39.42




AB 1.6.0750 BC6 7.5 metre 3/8 BSP FBE £51.26



ABC.1.5.1000 BC4 10 metre £97.54

ABC.1.5 1500 BC4 15 metre £142.61

HOSE SLEEVING

GW30BK Textile overbraid sleeving (Polyester) 25-30mm

GW40GR Textile overbraid sleeving (Polyester) 40-60mm

PVCT 2/400 PVC sleeve 2in (50mm) approx 200m roll

PVCT 3/400 PVC sleeve 3in (75mm) approx 200m roll

HVLP TURBINE HOSES &ACCESSORIES

HVLP-8-NPC 8 metre spiral wound hose with swaged connections.3/4 BSP (F) and QD connection for gun. Ideal for applications where excess heat is not aproblem

HVLP-9-CNPC 9 metre combination hose comprising 4 metre light spiral wound hose, 5 metre heavy reinforced hose, jointed and complete with 3/4 BSP (F) and QDgun connection

HC-02 17 x 17mm nylon hose coupler

HVLP 1/E 3/4in screw ring BSP for 3/4in hose tail. Nickel plated

HVLP 1/E/M20 M20 screw ring for 3/4in hose tailHVLP 3/E 18mm diameter hose tail, brassHVLP 5/E QD coupling tail. 18mm brassHVLP 6/E QD coupling. Nickel platedHVLP 8/E Spiral PVC hose smooth bore black

(per metre)HVLP 9/E Heavy delivery hose smooth bore

black (per metre)HVLP 10/E Hose joiner QD tail x 3/4in male thread

SPRAY GUN LUBRICANTSGL-50 Silicone free food quality spray gunlubricant. Supplied in a 50ml dispensingcontainer as illustrated.

HVLP turbine hoses and accessories

CLEANING BRUSHES24097-R-K10Cleaning brushes 130mm, nylon bristles (pack of 10)

42-884-214-K10Cleaning brushes 250mm, nylon bristles (pack of 10)

CBK-500 Cleaning brush kit This kit contains all thebrushes you should need forgun cleaning. A selection of 6different sizes of brushes, alube bottle and fine broaches.

52

section three

53

order ref description bore r.r.p order ref description bore r.r.p


Air HosesBR.1.5.0500 BC4 5 metre £32.32

BR.1.5.0750 BC4 7.5 metre £39.50

BR.1.5.1000 BC4 10 metre £48.36

BR.1.5.1500 BC4 15 metre £67.60

BR.1.6.0500 BC6 5 metre £30.10

BR.1.6.0750 BC6 7.5 metre £40.64

BR.1.6.1000 BC6 10 metre £49.86

BR.1.6.1500 BC6 15 metre £69.85

RA 1.5.0500 BC4 5 metre 1/4 BSP FBE £29.84

RA 1.5.0750 BC4 7.5 metre 1/4 BSP FBE £36.58



RPUA 1.4.0500 BC4 5 metre 1/4 BSP FBE £24.46

RPUA 1.4 0750 BC4 7.5 metre 1/4 BSP FBE £31.42

RPUA 1.4 1000 BC4 10 metre 1/4 BSP FBE £35.84


RPUA 1.5.0500 BC4 5 metre 1/4 BSP FBE £26.42

RPUA 1.5 0750 BC4 7.5 metre 1/4 BSP FBE £35.84

RPUA 1.5 1000 BC4 10 metre 1/4 BSP FBE £40 10


RR 1.5 0500 BC4 5 metre 1/4 BSP FBE £32.82

RR 1.5 0750 BC4 7.5 metre 1/4 BSP FBE £40 24



AC 1.5 0500 BC 4 5 metre 1/4 BSP FBE £51.98

AC 1.5 0750 BC 4 7.5 metre 1/4 BSP FBE £75.20

AC 1.5 1000 BC4 10 metre 1/4 BSP FBE £96.84

AC 1.5 1500 BC4 15 metre 1/4 BSP FBE £141.56

Fluid HosesCrimped connections. Re useable available by request

LF.1.4 0750 BC6 7.5 metre 3/8 BSP FBE £96.26

LF 1.4 1000 BC6 10 metre 3/8 BSP FBE £125.40

LF 1.4 1500 BC6. 15 metre 3/8 BSP FBE £184.20


LF 1.6 0750 BC6 7.5 metre 3/8 BSP FBE £134.22



LM.1.4 0500 BC6 5 metre 3/8 BSP FBE £37.04

LM 1.4 0750 BC6 7.5 metre 3/8 BSP FBE £50 78

LM 1.4 1000 BC6 10 metre 3/8 BSP FBE £64.54



LM 1.6 0750 BC6 7.5 metre 3/8 BSP FBE £72.34



LX 1.3 0750 BC6 7.5 metre 3/8 BSP FBE £60 94

LX 1.3 1500 BC6 10 metre 3/8 BSP FBE £108.94

MA 1.4 0750 BC6 7.5 metre 3/8 BSP FBE £40 62

MA 1.4 1000 BC6 10 metre 3/8 BSP FBE £51.64

LPC 1.4 0500 BC6 5 metre 3/8 BSP FBE £45.32

LPC 1.4 0750 BC6 7.5 metre 3/8 BSP FBE £60.52




LPC 1.6.0750 BC6 7.5 metre 3/8 BSP FBE £83.64

LPC 1.6.1000 BC6 10 metre 3/8 BSP FBE £106.34

LPC 1.6.1500 BC6 15 metre 3/8 BSP FBE £148.54

LPV 1.4 0500 BC6 5 metre 3/8 BSP FBE £37.18

LPV 1.4 0750 BC6 7.5 metre 3/8 BSP FBE £50 98



LPV 1.6.0500 BC6 5 metre 3/8 BSP FBE £52.35

LPV 1.6.0750 BC6 7.5 metre 3/8 BSP FBE £72.62



VOW 1.4. 5.0750 BC4 /6 7.5 metre 1/4 BSP FBE £115.84

VOW 1.4. 5.1000 BC4 /6 10 metre 1/4 BSP FBE £155.18

VOW 1.4. 5.1500 BC4 /6 15 metre 1/4 BSP FBE £210 37

VAF 1.4. 5.0500 BC4 /6 5 metre 1/4 BSP FBE £40 00

VAF 1.4. 5.1000 BC4 /6 7.5 metre 1/4 BSP FBE £62.84

VAF 1.4. 5.1500 BC4 /6 15 metre 1/4 BSP FBE £84.00

RE USEABLE TUBING CONNECTORSIncluding spring guards

76-031/39 6/4 1/4 NPSM (F) £13.90

76-032/39 6/4 1/4 BSP (F) £13.90

76-068/39 6/4 3/8 NPSM (F) £13.90

76-069/39 6/4 3/8 BSP (F) £13.90

76-141/39 8/6 1/4 NPSM (F) £13.90

76-142/39 8/6 1/4 BSP (F) £13.90

76-178/39 8/6 3/8 NPSM (F) £13.90

76-179/39 8/6 3/8i BSP (F) £13.90

76-251/39 10/8 1/4i NPSM (F) £13.90

76-252/39 10/8 1/4 BSP (F) £13.90

76-288/39 10/8 3/8 NPSM (F) £13.90

76-289/39 10/8 3/8 BSP £13.90

78-185/39 1/4 BSP(F) x 1/4 BSP(M) compact elbow £23.50

76 Series reuseable connectionsUse with LX.1.3 3/16 bore

76-221/39 1/4 NPSM (F) £10 78

76-222/39 1/4 BSP (F) £10.78

76-236/39 M16 x 1.5(F) £10.78

76-238/39 3/8 NPSM (F) £10.78

76-239/39 3/8 BSP (F) £10.78

Use with LM, MA, MO, RPUA 1/4 bore

76-341/39 1/4 NPSM (F) £10.78

76-342/39 1/4 BSP (F) £10.78

76-343/39 M14 x 1 (F) £10.78

76-358/39 3/8 NPSM (F) £10.78

76-359/39 3/8 BSP (F) £10.78

76-303/31 Spring Guard £3.18

Use with AL LF LPC LPV 1/4 bore

76-441/39 1/4 NPSM (F) £10.78

76-442/39 1/4 BSP (F) £10.78

76-458/39 3/8 NPSM (F) £10.78

76-459/39 3/8 BSP (F) £10.78

Use with RA 5/16 bore

76-511/39 1/4 NPSM (F) £12.78

76-512/39 1/4 BSP (F) £12.78

Use with AL, RA, LPC, LPV 5/16 bore

76-561/39 1/4NPSM (F) £10.78

76-562/39 1/4 BSP (F) £10.78

76-578/39 3/8 NPSM (F) £10.78

76-579/39 3/8 BSP (F) £10.78

Use with AB, LF, LPC,LPV 3/8 bore

76-691/39 1/4 NPSM (F) £12.78

76-692/39 1/4 BSP (F) £12.78

76-688/39 3/8 NPSM (F) £10.78

76-689/39 3/8 BSP (F) £10.78

Use with AB, MA, RPUA, LM 5/16 bore

76-761/39 1/4 NPSM (F) £10.78

76-762/39 1/4 BSP (F) £10.78

76-778/39 3/8 NPSM (F) £10.78

76-779/39 3/8 BSP (F) £10.78

Use with MA and RPUA 3/8 bore

76-891/39 1/4 NPSM (F) £12.78

76-892/39 1/4 BSP (F) £12.78

76-888/39 3/8 NPSM (F) £10.78

76-889/39 3/8 BSP (F) £10.78

QUICK DETACH FLUID COUPLINGS78-311/34 QD connection 3/8 BSP (M) £46.48

78-312/34 QD male stem 3/8 BSP (F) £24.56

HOSE NUT AND TAIL / O CLIP -TEN PACKS

Inserts for 1/4in bore hosesNTK-1404-K10 1/4 BSP (F) £29.66

NTK-3804-K10 3/8 BSP (F) £32.86

Inserts for 5/16in hosesNTK-1405-K10 1/4 BSP (F) £29.66

Inserts for 3/8in hosesNTK-1406-K10 3/8 NPSM (F) £32.86

NTK-3806-K10 3/8 BSP (F) £32.86

O clipsC-13-K10 clip for12.5mm OD £9.95

C-14-K10 clip for 14mm OD 9.95

C-16-K10 clip for 16mm OD £10.95

C-19-K10 clip for 19mm OD £10.95

QD AIR CONNECTORS

Hi Flo50-401 Double acting safety QD £23.84

50-402 Tail for above (9mm) £23.84

50-407 QD Euro 1/4 BSP (M) £17.00

50-408 QD plug 1/4 BSP (F) £5.14

50-409 QD plug 1/4 BSP (M) £5.14

50-410 QD plug 9mm tail £5.14

50-418 QD plug 6mm hose tail £5.14

50-427 QD Euro 9mm tail £18.06

50-437 QD Euro 1/4 BSP (M) £19.54

50-447 QD Euro 1/4 BSP (M) £18.06

50-417 QD Mini 1/8 BSP (M) £17.14

QD swivel connectors Hi Flo 80-110 Swivel joint Euro 1/4 (M) £17.50

80-115 Swivel joint Euro 1/4 (F) £17.50

Tank/Pump, dual outlet connectors74-330 2/3 outlet connector Y £17.50

74-301.4 2 outlet c/w 1/4 valves £17.50

78-174 Pump dual outlet c/w valves 3/8 BSP £62.50


54


Y BLOCKS FOR PAINT RECIRCULATIONLow pressure models

Aluminium non restrictor 74-941/27 3/8 (F) x 2 x 1/4 (M) BSP £67.34

74-944/27 3/8 (F) x 2 x 3/8 (M) BSP £67.34

74-305/27 3/8 (F) x 2 x 1/4 (M) BSP £79.95

74-306/27 3/8 (F) x 2 x 3/8 (M) BSP £79.95

Aluminium bottom restrictor 74-711/27 2 x 1/4 BSP (M) x 1 3/8 BSP(F) £69.75

74-744/27 2 x 3/8 BSP (M) x 1 3/8 BSP(F) £69.75

Aluminium and stainles steel side restrictors 78-145/27 2 x 1/4 BSP (M) x 1 3/8 BSP (F) £130.00

78-146/27 2 x 3/8 BSP (M) x 1 3/8 BSP (F) £130.00

78-145/30 2 x 1/4 BSP (M) x 1 3/8 BSP (F) £150.00Special order

Aluminium non return 74-340/27 M12x1 (M) x 2x1/4 (M) BSP £85.96

74-341/27 1/2 x 24 UNC (M) x 2 x1/4 (M) BSP £85.96

74-342/27 3/8 (F) x 2 x 1/4(M) BSP £85.96

74-343/27 3/8 (F) x 2 x 3/8 (M) BSP £85.96

74-344/27 1/4 (M) x 2x 1/4 (M) BSP £85.96

74-345/27 M12x1(M) x 2 x 1/4(M) BSP £85.96

Stainless steel centre restrictor74-541/30 1 x 3/8 (F) x 2 x 1/4 (M) BSP £130.00

74-544/30 1 x 3/8 (F) x 2 x 3/8 (M) BSP £130.00

74-555/30 1 x 3/8 (F) x 2 x 3/8 (M) NPSM £130.00

Stainless steel single line restrictor78-134/30 3/8 (M) 3/8 (F) £90.96

LOW PRESSURE BALL VALVES -MULTI PURPOSE

Plated brass78-208/15 1/4 BSP swivel x M £12.82

78-209/15 1/4 BSP (F) x (F) £7.60

78-215/15 3/8 BSP (M) x (M) £10.00

78-216/15 3/8 BSP (F) x (F) £7.68

MBV.1/4 1/4 (FF) BSP mini ball valve £5.00

MBV.3/8 3/8 BSP (MF) Mini ball valve £5.50

78-049 1/4 BSP (MM) micro ball valve £11.50

Stainless steel78-323/30 1/4 BSP (M) x (M) £27.08

78-324/30 3/8 BSP (M) x (M) £27.08

MANIFOLD78-173/30 1/4 BSP (F) 6 outlet Stainless .Steel £395.00

HOSE SLEEVING

Woven polyesterGW 30/BK 25/30mm per metre £6.12

GW 40/GR 40/60mm per metre £8.48

PVC Layflat sleevingPVCT/2/400 PVC sleeve, 2in (50mm) approx

200 metre roll £53.38

PVCT/3/400 PVC sleeve, 3in (75mm) approx 200m roll £59.32

CLEANING BRUSHES24097-R-K10 Cleaning brushes 130mm pack of 10 £35.00

42-884-214-K10 Cleaning brushes 250mm pack of 10 £24.00

CBK-500 Cleaning brush kit £19.50

SPRAY GUN LUBRICANTSGL-50 Spray gun Lube 50ml £7.92

HVLP TURBINE HOSES/ACCESSORIESHVLP-8-NPC 8 metre assembly £97.00

HVLP-9-CNPC 9 metre assembly £104.58

HC-02 17mm x 17mm joiner £4.14

HVLP 1/E Screw ring 3/4in £6.60

HVLP1/E/M20 Screw ring M20 £6.60

HVLP 3/E 18mm dia hose tail £6.60

HVLP 5/E QD coupling tail £7.68

HVLP 6/E QD coupling £26.18

HVLP 8/E Spiral hose £7.72

HVLP 9/E Heavy hose £8.42

HVLP 10/E Hose coupler £15.32

www.exitflex.co.uk

section four

55

Air fed breathing andair control equipment

Crusader Lite air fed visor page 56

Avenger air fed visor page 58

Breathing air supply filtrationand regulation equipment page 60

Niltox air purifiers for carbon monoxide removal page 62

Price list page 64



The range of breathing air apparatus from Exitflex offers a choice between foam face

seals with a lightweight visor or a visor featuring a chin guard as a standard feature.

There is a comprehensive range of air filtration equipment with regulation. When

there is a risk of carbon monoxide then the Niltox air purifier system offers

the complete solution.

56

section four

57

50-529 Charcoal filter accessory (colour changing)

CRUSADER LITE AIR FED VISOR

Crusader air fed visors are ideal for paint sprayingand light finishing applications.The Crusader lite visor is fully CE approved to BSEN1835; 2000, and CE marked. Made in Britain.

The features are :-

• Comfortable and light weight

• Protects the full face area

• Wide field of vision

• Regulator, fitted with dual sensory air deficiencywarning whistle

• Pressure gauge, gives visual confirmationof air supply

• Nominal protection factor of 200, the highest available

• The design allows for the easy use of ear defenders when needed (not supplied)

The Crusader system comprises:-

• Fully assembled visor ready for use

• Adjustable regulator belt mounted

• Adjustable belt to fit waists from 22/48 inches

• Spare visor covers

• Storage Bag

These are the optional accessories :-Charcoal filter (colour changing)Air flow test meter.

Air fed breathing and control equipment


Part numbers

50-625 Complete outfit with visor and belt with regulator

50-525 Crusader Lite, visor only

50-526 Belt assembly with regulator

50-527 Air flow test meter accessory

50-528 Cool tube air chiller unit (excl regulator)

50-529 Charcoal filter accessory

Spares

50-460 Breathing air visor tube with silencer

50-461-K50 Pack 50 visor covers

50-462 Replacement visor with breathing tube(excludes brow guard)

50-463 Replacement brow band

50-464 Replacement hood

50-465 Safety device and regulator

50-525 Visor assembly.Lightweight and comfortable

50-465 Safety device and regulator

50-526 Belt with regulatorassembly

50-528 Cool tube airchiller shown on beltas an extra

www.exitflex.co.ukwww.exitflex.co.uk58

section four

59

Air fed breathing and control equipmentAVENGER AIR FED VISOR

Protect your operator with this highlyefficient, easy to use, breathing equipment.Super quality, this British manufactured visor isdesigned for operator protection when painting. Thenew Avenger air fed visor is light and features a largeclear view acetate screen for great visibility with acomfortable fabric face seal and an effective chinguard.An air Flowmeter is built in to the air supply diffuseron the inside left side of the visor. This enables theoperator to see the air flow indicator and get visualconfirmation that air is flowing correctly. This addedsafety feature ensures that the wearer is made awareshould any air supply problem develop.The filter and pre set air regulator on the belt havefurther safety features including an indicator gauge toshow air flow condition, also a colour changingactivated carbon filter to show you when the filterneeds attention.The Avenger visor comes complete with a fabrichead shroud to protect the wearer from paintoverspray. A removable visor cover for easy cleaningis also supplied. The Avenger system protects the eyes, lungs andface from solvent and airborne contamination. It ispossible to become sensitised by isocyanates, soavoid the risk, it is recommended that a visor is usedat all times.Portable and wall mounted filtration systems areavailable for use with the Avenger visor. Theseprovide further protection for spray duty.

Part numbers

Outfits

50-511-1 Air fed visor only

50-513 Waisbelt with filter, regulator and flowindicator gauge

50-611-1 Air fed outfit comprises 50-511-1 plus50-513

50-612-1 Air fed outfit comprises 50-611-1 plus50-413-K10, 50-406 gun hose and 50-505, 10 metre air supply hose

Spare parts

50-404 Odour removal cartridge for 50-513

50-406 4ft Gun air supply hosecomplete with Yand 1/4 BSP QD connection and 1/4 BSP(F) stem

50-423 Flow indicator gauge. 50-505 10 metre air supply hose complete

with1/2 BSP(M) QD, Y connector and 1/4BSP QD and stem

50-507 Y Connector 1/4 BSP(F)

50-301-K5 Hygene kit pack of 5 brow bands, andtextile face seals

50-302 Fabric head shroud

50-303 Replacement screen for 50-511-1

50-304 Replacement visor air supply tube for 50-511-1

50-305-K10 Visor covers pack of 10

50-611-1 Avenger Air Fed VisorAir fed visor outfit complete with belt, pre setregulator and odour removal cartridge, includingfabric head shroud and spare acetate visor cover.

System performance and general description

Air supply pressure maximum 10bar (145psi) minimum 4bar (60psi)

Mask air supply rate* maximum 232 l/minminimum 160 l/min

Hose length maximum 15m(supply to regulator)

Environmental working temperature 1.5 to 50ºCFilter life 400 operating hours - nominal

*When used with with a spray gun needs 620 l/min at 90psi

MaterialsBrowband polypropyleneHead harness nylonVisor acetatePress studs nickel plated brassSkirt woven elastic on

polycarbinate carrierHose PVC Hose fittings brass/nickel


section four

61

PORTABLE FILTRATION UNITSEspecially suited to mobile operators or to personnelwho are responsible for their equipment.The 50-515 twin filter contains a pre-filter and acoalescing filter in a convenient portable frame.The 50-516 triple has an activated carbon filter inaddition to the pre-filter and coalescing filter.All units have a semi automatic drain with an air flowcapacity up to 28cfm at 90psi

Maximum temperature 40ºC

Maximum input 150psi

Wall mounted versions are listed below.Note These filters will not remove carbon monoxide orother toxic gases.

Breathing air filter system and air control COMBINED FILTER REGULATOR

Filtering capacity 25µm

Semi-automatic drain operating pressure min 1.2baror automatic operating pressure 2 to 10bar ormanual.

Regulating device with a rolling diaphragm (very lowhysterisis).

Inlet port 3/8 BSP(F)

Inlet pressure at 23ºC maximum 16bar at 50ºC

Flow maximum 5200l/min at 6.3bar

Outlet ports 2 regulated outlets1/4BSP(M) complete with butterfly handle ball valves

SPARES

Respiratory Filters and Elements

50-514 Coalescing filter (complete) 1/2in ported(mod112)

50-415 Coalescing filter element for 50-514

50-530 Carbon filter (complete) 1/2in ported(mod112)

50-424 Replacement carbon filter element for50-430 & triple filter units)

50-425 Replacement pre-filter element (for twinor triple filter units)

50-552 Replacement pre-filter unit (for twin or triple filter units)

50-517 supreme boxed triple filter unit

50-415

50-425 50-424

50-520 3/8(F) inlet 2 x1/4 BSP(M) outlet

50-515 Portable twin filter unit. Prefilter & coalescing filter (Mod 112) mounted in portable frame.

50-515/W Wall mountable twin filter unit. Prefilter& coalescing filter (Mod 112) supplied with wall mounting kit.

50-516 Portable triple filter unit. Prefilter, coalescing filter & activated carbon filter (Mod 112) mounted in portable frame.

50-516/W Wall mountable triple filter unit. Prefilter,coalescing filter, activated carbon filter (Mod 112) supplied with wall mountingkit.

50-517 Supreme boxed triple filter unit includes,prefilter, coalescing filter, activated carbon filter in a robust easy to transporthousing

50-515 twin filter 50-516 triple filter

50-530

www.exitflex.co.uk www.exitflex.co.uk62

section four

63

Niltox purifiers are designed to ensure thatcompressed air is delivered to meet British andEuropean standards, BSEN529 EN12021 COSHH.These units provide the ultimate in breathing airprotection and are available as single or dual usersystems.

The units protect the air user because they removecarbon monoxide and carbon dioxide. Few airsystems on the market have this capability.When you combine that benefit with the advantagesof a colour change monitor, Easy servicing andreduced testing requirements, then the benefits areclear.Niltox removes• Carbon monoxide• Carbon dioxide• Oil and oil vapour• Water , water vapour• Smell, taste, dirt and dust• And the doubt about air quality

Colour Change MonitorReduce the need for air quality tests using thepatented, easy to use colour change monitor.

Benefits• Air quality to BS4275, EN 120021, COSHH,

HSG53,prEN529.• Duplex, self regenerating automatic system.• Easy servicing, with all the purification stages

contained in sealed cartridges.• Options for the unit are;- totally pneumatic

operation, hours run meter, low pressure alarmand fully enclosed cabinet.

All Niltox purifiers contain the unique colour changemonitor that gives an easily visible continuous indication of the status of the unit.

Blue is new Pink is extinctIf the indicator is blue the air is fit to breathe, if it ispink, servicing is required.The Niltox purifier is a proven and acceptedengineering control measure. The unique built incolour change monitor shows if the purifier is workingat all times. This enables the user to meet the legalrequirements of COSHH and HSG53, yet at the sametime avoiding the considerable expense of monthlyair quality tests. These can be reduced to once perannum..Larger capacity units are available by enquiry.

Niltox air purifiers

Blue is new, pink is extinct

6AR 12 AR

Outlet flow l/m 180 360

Total flow l/m 222 444

Max/min pressure bar 10/4 10/4

Max/min temperature ºC* 50/5 50/5

PV rating bar per litre 2@15 2@30

Pipe size BSP 1/2 1/2

Height H mm 500 740

Clearance C mm 400 600

Weight kg 18 20 * based on 180l/min per user

Flows based on 20ºC 7 bar inlet.

The compressed air fed to the unit should be from a system installed and maintained to breathing airstandards.

BLUE is NEW. When the indicator tape showsblue, the purifier is providing breathablequality air.PINK is EXTINCT. If the pink colour reachesthe indicator label it is time to change thecartridges.

Each Niltox cartridge contains a number ofstages to remove contamination from thecompressed air.

Each stage undergoes the continualregeneration cycle thus ensuring highefficiency throughout the life of the cartridge

To order your choice of unit, please use thefollowing part numbersNT6AR Single operator unit

NT12AR Dual operator unit


Crusader Lite air fed visor50-625 Complete outfit £160.00

50-525 Visor only £70.00

50-526 Belt assy with reg £120.00

50-527 Air flow meter £450.00

50-528 Cool tube air chiller £120.00

50-529 Optional charcoal filter £94.80

Spares

50-460 Visor tube/silencer £13.00

50-461-K50 Visor cover £22.00

50-462 Visor shield/tube ass’y £25.00

50-463 Spare brow band £9.90

50-464 Optional head shroud £30.00

50-465 Safety device/regulator £90.00

Avenger air fed visorProducts and Outfits

50-611-1 Avenger outfit £195.00

50-612-1 Outfit plus supply hoses £280.00

50-511-1 Avenger visor only £85.00

50-513 Belt/regulator/only £156.00

Spares

50-404 Odour removal

Cartridge for 50-513 also 50-529 £56.00

50-406 Gun hose c/w QD £22.00

50-423 Flow indicator gauge £25.50

50-507 Y connector 1/4in BSP £7.00

50-505 10m supply hose kit £68.50

50-301-K5 Hygene kit. 5 pack £48.80

50-302 Fabric head shroud £30.00

50-303 Replacement screen £10.95

50-304 Air tube with diffuser £13.00

50-305-K10 Visor covers pack of 10 £24.95

Breathing air supply, filtrationand regulation equipmentProducts

50-520 Air filter regulator c/w 2 regulated outlets £120.00

50-515 Twin portable filter,particle / coalescing £185.00

50-515-W TwinWall mount £211.00

50-516 Triple portable filter,particle/ coalescing andactivated carbon £300.00

50-516-W Triple wall mount £328.00

50-517 Supreme boxed triple filterin yellow housing £280.00

50-514 Coalescing filter unit £105.00

50-530 Carbon filter unit £115.60

50-552 Pre filter unit £72.00

Spare parts

50-415 Coalescing cartridge for 50-514 £65.00

50-424 Carbon Cartridge for 50-430 £59.88

50-452 Pre Filter Element for 50-552 £11.40

NILTOX air purifier systemsNT6AR One user system £998.00

NT12AR Two user system £1186.00

RK6AR Repair kit with all serviceitems for NT6AR £295.00

RK12AR Repair kit with all serviceitems for NT12AR £405.00

Air fed breathing and control equipment price list


section five

65

Fluid filter housings and screens

Manifold filter assemblies,high and low pressure page 64

Manifold filter screens page 65

Spray gun and line filters and screens. page 67

Swivel filter housings page 68

Disc tip filters and housings page 68

Low pressure filter assembliesand screens page 69

Conventional gun filters page 70

Suction filters page 71

Screen mesh, selection table page 72

Price list page 73



Filtration can be of critical importance in ensuring trouble free

operation of spray systems. The Exitflex range of quality components,

presented here, can provide solutions to meet the needs of the most

demanding applications.


section five

67

Manifold filter assemblies high and low pressure

www.exitflex.co.uk

High pressure models36-400/12 Aluminium filter manifold assembly,

400bar MWP, incl screen, (specify mesh) 36 series/400 3/8 BSP(F) inlet,1/4 BSP(M) outletMax OD 55mm H 200mm

36-350/30 Stainless steel manifold filter assembly. 500bar MWP, incl screen (specify mesh) 36 series/600 3/8 BSP(M) inlet, 3/8 BSP(M) outlet.Max OD 70mm H 175mm

36-398/30 Stainless steel filter manifold assembly, 400bar MWP, incl screen (specify mesh) 36 series/400 3/8 BSP(F) inlet, 2 x 3/8 BSP(F) outlets.Max OD 85mm. H 178mm

36-399/30 Stainless steel manifold filter ,high capacity. 400bar MWP Includes two filter screens. (specify mesh).36 series/400 1/2 BSP(F) inlet and outlet. Max OD 74mm H 325mm

Low pressure models36-300/30 Stainless steel filter manifold assembly.

100bar MWP.incl screen (specify mesh) 36 series/400.3/8 BSP(F) inlet and outlet.Max OD 68mm. H 180mm.

78-217/30 Stainless steel In Line filter assembly. Ideal for final outlet and fine filter in automotive applications. 100 bar MWP. incl screen, (specify mesh). 36 series/4003/8 BSP(F) inlet and outlet.Max OD 45mm H 152mm.

36-400/12

36-350/30

36-398/30

36-399/30

36-300/30

78-217/30

36 Series/400Stainless steel manifold filter screens. Use withmanifold filters 36-300, 36-400, 36-398/30, 36-399/30. also 36-450 series suction filter housings.These popular filter screens can be used with, Gracoand some WIWA manifolds. OD 27mm H 145mm.

36-401/34 Filter screen 15 mesh36-403/34 Filter screen 30 mesh36-406/34 Filter screen 60 mesh36-410/34 Filter screen 100 mesh36-415/34 Filter screen 150 mesh36-420/34 Filter screen 200 mesh36-430/34 Filter screen 300 mesh36-440/34 Filter screen 400 mesh36-444/34 Filter screen 1200 mesh 36-394/12 Aluminium Filter Centre Support.05-001-011-27 Stainless filter support spring

36 Series/600Stainless steel manifold filter screens. Use withKremlin, Wagner,. IBK and other models.ID 22mm OD 27mm H 114mm

36-603 Manifold filter Screen size No. 3(0.08mm) 200 mesh




36-609 Manifold filter Screen size No .9(0.24mm) 66 mesh

36-612 Manifold filter Screen size No.12(0.32mm) 50 mesh

Manifold filter screens36-615/34 Manifold filter Screen size No.15

(0.41mm) 40 mesh36-620/34 Manifold filter Screen size No.20

(0.53mm) 30 mesh36-359/30 Support spring for all of the above

36 Series / 025Manifold filter, stainless steel mesh. Colour codednylon end caps. Use with Colora. OD 25mm H 155mm.

36-025/01 Blue filter 30 mesh 36-025/02 Black filter 60 mesh 36-025/03 Yellow filter 100 mesh 36-025/04 Red filter 150 mesh 36-025/05 White filter 200 mesh

36 Series / 100Stainless steel manifold filter screens with colourcoded nylon core. Use with, WIWA and ITW models. OD 34mm H 129mm.

36-103/34 Blue filter 30 mesh 36-105/34 Orange filter 50 mesh 36-107/34 Yellow filter 70 mesh. 36-110/34 Black filter 100 mesh 36-115/34 Red filter 150 mesh 36-120/34 White filter 200 mesh


section five

69

329 SeriesManifold filter screens Stainless screen with colourcoded Nylon frame. Quality pattern parts for use withGraco equipment, see Graco ref in brackets.

OD 31mm L. 115mm329 239 Black filter med (246-384)

60 mesh329 240 Blue filter med (246-382)

100 mesh

OD 20mm L. 90mm329 241 Black filter short (246-384)

60 mesh 329 242 Blue filter short (246-382)

100 mesh OD 31 mm L 180mm

329 243 Black filter long (244-067) 60 mesh

329 244 Blue filter long (244-068)100 mesh

329 series spray gun filtersThese colour coded filters are for use in Gracocontractor market spray guns. Graco ref in brackets.Stainless steel mesh, and plastic core. Packs of 2 filters

329 154-K2 Black filter (287-032) 60 mesh 329 155-K2 Blue filter (287-033) 100 mesh 329 132-K2 Orange filter (218-631) 50 mesh 329 133-K2 Blue filter (218-133) 100 mesh

36 series gun handle filtersThese filters are used by the SP90 gun the 36-UKinline filters. Wagner and various popular gun typesuse these colour coded filters which feature stainlesssteel screen and plastic core.

36-030-K10 Green filter 30 mesh 36-060-K10 White filter 60 mesh 36-100-K10 Yellow filter 100 mesh 36-150-K10 Blue filter 150 mesh 36-200-K10 Red filter 200 mesh

35 series AAA filtersThese colour coded gun handle filters are for use withOptima AAA spray guns. They feature stainless steelmesh and a colour coded plastic core. They areavailable in packs of ten filters.

35-030-K10 Green filter 30 mesh 35-050-K10 White filter 50 mesh35-100-K10 Yellow filter 100 mesh 35-180-K10 Red filter 300 mesh

36-UK series in-line filter housingThis inter line filter assembly can operate up to 350bar. It is designed as a filter that can be placedbetween fluid lines. Weight is 70gm OD, 26mm L 157mm. 36 series gun handle filters are included inthis unit (specify size).

36-UK-1 1/4 NPSM (M) both ends 36-UK-2 1/4 NPSM (M) x 3/8 NPSM (M) 36-UK-3 3/8 NPSM (M) both ends

36 series in-line filters screensThis type of stainless steel screen is found in Kremlinspray guns.OD 9.5mm H 17mm

36-1050-K10 Pack of 10 screens 50 mesh36-1050-K10 Pack of 10 screens 100 mesh36-1052-K10 Pack of 10 screens 200 mesh

Spray gun and line filters/screens36 Series / 200Short manifold filter screen. Stainless steel screen,Colour coded nylon core. Use with, WIWA and ITWmodelsOD 26mm H 53mm.

36-203/34 Blue filter 30 mesh 36-205/34 Orange filter 50 mesh36-207/34 Yellow filter 70 mesh36-210/34 Black filter 100 mesh 36-215/34 Red filter 150 mesh36-220/34 White filter 200 mesh

37 Series / 300Stainless steel manifold filter screens. Use with ITWRaptor equipment.OD 32mm H 99.5mm.

37-331/34 Manifold filter 30 mesh 37-332/34 Manifold filter 100 mesh

Manifold filter screens


section five

71

Spray gun and line filters/screensSWIVEL FILTER HOUSINGS

71 series high pressure disc tip swivel filter These units are for use with airless spray equipment.The assembly number includes the disc tip filter.Specify the screen size required. MWP 400bar.Stainless steel wetted parts.OD 21mm L 86mm Average weight 115gm

71-110/2 1/4 BSP(M) x 1/4 BSP(F)71-220/2 1/4 NPSM(M) x 1/4 NPSM(F)71-410/2 3/8 BSP(M) x 1/4 BSP(F)71-420/2 3/8 NPSM(M) x 1/4 NPSM(F)71-450/2 3/8 BSP(M) x 3/8 NPSM(F)71-480/2 3/8 BSP(M) x M16 x 1.5 (F)71-880/2 M16 x 1.5(M) x M16 x 1.5 (F)

DISC TIP FILTERS AND HOUSINGS

36 series disc tip filtersTop quality best materials. Machined thread in nylonbase, Stainless steel components.Packed in units of 10.

36-020-K10 Disc tip filter 30 mesh36-009-K10 Disc tip filter 60 mesh36-005-K10 Disc tip filter 100 mesh36-003-K10 Disc tip filter 200 mesh

72 Series disc tip filter housingsDeveloped for those applications where localfiltration is required. Filter is included (specify size).Steel construction. Electroless nickel finish. MWP 400barOD 50mm L 2mm. Average weight 50gm

72-110/2 1/4in x 1/4 BSP (M/F)72-220/2 1/4in x 1/4 NPSM (M/F)72-440/2 3/8in x 3/8 BSP (M/F)72-520/2 3/8 BSP(M) x 1.4inNPSM (F)72-880/2 M16 x 1.5 x M 16x 1.5 (M/F)

78 series disc tip filter housing This housing has been developed to enable the useof disc tip filters with the popular Binks AAA sprayguns. Fully stainless steel, the part number indicatesscreen size included. All units are 1/4 NPSM(M)connection. And include nut, housing and disc tipfilter.

78-164-K(60) Assembly with 60 mesh filter78-164-K(100) Assembly with 100 mesh filter78-164-K(200) Assembly with 200 mesh filter

Low pressure filter assemblies and screens36-750 series low pressure filter housingsThese filter assemblies are for pressure feedapplications. There is a choice of fully stainless steel 36-750/30 or aluminium 36-752/12 to suit yourneeds. 36-750/30 OD 19mm L 72mm Weight 65gm

The new design 36-752/12 is made to fix direct to aspray gun inlet as a one piece holder for the nyloninsert. The fluid hose connects directly to thehousing. This minimises weight. At only 15gm it is anattractive solution. OD 19mm L 50mm Weight 15gm .

Versions available are listed and include the 36-751quick release housing. This is however is notdesigned to seal on disconnect. The line must bevalved each side. Used in automotive manufacturingapplications. OD 29mm L 76mm .

36-750/30 Filter housing SS 3/8 BSP (M/F)36-752/12 Filter holder Aluminum 3/8 BSP (M/F)78-111/34 QD Filter holder 3/8 BSP (M/F) St Steel*78-111/27 QD Filter holder 3/8 BSP (M/F) aluminum* special order non stock item

36-760 series filter screensThe colour coded nylon filter screens are available in50 unit packs by colour.Mixed colour packs are not available.

36-760-K50 White filter 300 micron36-761-K50 Blue filter 112 micron36-762-K50 Red filter 80 micron36-763-K50 Green filter 60 micron36-764-K50 Orange filter 30 micron36-765-K50 Brown filter 20 micron36-766-K50 Pink filter 185 micron

NB. These plastic filters are non conductive. Theassemblies are however conductive when filter isfitted.

78 series pressure tank filterFor pressure feed application. 78-351 is colour white78-352 is colour yellow.OD 44mm L 115mm Weight 415gm

78-350 Stainless steel 3/8 BSP (F) swivel nut inlet 3/8 BSP (M) outlet 20bar MWP

78-351 60 mesh cone filter element (single)78-352 100 mesh cone filter element (single)

78-111/34

78-111/27


section five

73

Suction filter stainless steelThese comprise a short pan shaped filter in variousthread sizes but two mesh sizes. The part numberrequires the thread size to be added where theasterisk can be seen.OD 48mm H 40mm Weight 120gm

36-029/01/ ** 30 mesh suction filter (add thread size)

36-029/02/ ** 60 mesh stainless filter(add thread size).

Both filters are available in the following thread sizes.1in, 1/2in, 3/4in, 3/8 in/ M15 x 1, M28 x 1.5. Add to part number, for example:** 36-029/01/3/4in. This indicates a 30 mesh filterwith 3/4in female thread.

‘Rat’ CatchersUsing ‘Rat’ Catchers ensures you preventcontamination entering the wet section of the pumpreducing down time,

RAT-392153 Suction strainer, Nylon cap.7/8in UNF (F) replaces G246385

RAT-392152 Suction strainer, Nylon cap.3/4in UNF (F) replaces G235004

RAT-392120 Double mesh, Stainless cap.1in UNF (F) replaces G181072

RAT-392122 Double mesh, Stainless cap.3/4in UNF (F) replaces G183770

RAT-329134 Single mesh, Stainless cap.1in UNF (F) replaces G189920

Conventional suction and gravity gun filtersTo fit suction tube 6.5 - 8mm diameter

36-501-K10 Suction filter nylon 80 mesh 18 x 37mm (blue) Pack 10

36-501-K100 Suction filter nylon 80 mesh 18 x 37mm (blue) Pack 100

36-508-K10 Suction filter 80 mesh stainless steel screen 18 x 37mm (white) Pack 10

36-508-K100 Suction filter 80 mesh stainless steel screen 18 x 37mm (white) Pack 10

To fit suction tube 8 - 10mm diameter

36-512-K10 Suction filter nylon 100 mesh 28 x 42mm (yellow) Pack 10

36-512-K100 Suction filter nylon 100 mesh 28 x 42mm (yellow) Pack 100

36-515-K10 Suction filter nylon 165 mesh 28 x 42mm (red) Pack 10

36-521-K10 Suction filter 100 mesh stainlesssteel screen 28 x 42mm (white) Pack 10

36-521-K100 Suction filter 100 mesh stainless steelscreen 28 x 42mm (white) Pack 100

36-531-K10 Gravity filter nylon 80 mesh (small blue) Pack 10

Conventional gun filters

Suction filters

Suction filters

Gravity gun filter

36 Series /450 large capacity suction filterassemblyThe well known Exitflex colour coded 36-450 seriessuction filter features a cap seal. It will draw paintdown to 10mm depth, almost the last drop. Get abetter result, use the 36-450 series filter in yourapplication. The filter assembly does pass throughthe bung of a 200 litre screw top drum.OD 55mm H 210mm Weight 180gm

36-450/42 Nylon housing 1in NPSM (F) green36-452/42 Nylon housing 3/4 NPSM (F) orange36-453/41 Nylon housing 1/2 NPSM (F) black36-454/42 Nylon housing 28 x 1.5mm (F) blue36-455/42 Nylon housing 15 x 1mm red36-456/42 Push on 1in (F) yellow36-460/20 Seal for above filter assemblies36-460/20 Body seal for all models

Use the 36-400 series stainless steel filter screenrange with these suction housings.

Suction filter – barrel typeOD 55mm H 81mm Weight 70gm

316000 Paint mini suction filter 30 mesh - (F) 28 x 1.5 (Nylon base)

317000 Paint mini suction filter 60 mesh - (F) 28 x 1.5 (Nylon base)

307030 30 mesh mini filter net (without base)307060 60 mesh mini filter net (without base)320000 Adaptor (M) 28x1,5 x (F) 15x1 for

siphon hose321000 Base adaptor (M) 28x1,5 x (F) 3/8in

for siphon hose322000 Base adaptor (M) 28x1,5 x (F) 1/2in

for siphon hose323000 Base adaptor (M) 28x1,5 x (F) 3/4in

for siphon hose324000 Base adaptor (M) 28x1,5 x (F) 1in

for siphon hose

Suction filter bell type311000 Paint suction BELL kit -(F) M15x1 - 30

and 50 mesh disc filters312000 Paint suction BELL kit -(F)1/2in - 30 and

50 mesh disc filters314000 Cap (F) M15x1 only315000 Cap (F) 1/2in only306055 Disc filter 30 ME nylon (pack 10)306105 Disc filter 50 ME nylon (pack 10)313000 Stainless steel spring


section five

75www.exitflex.co.uk

Fluid filter housings and screensprice listorder ref description r.r.p order ref description r.r.p

Manifold filter assembliesHigh Pressure

36-400/12 Aluminium 400 bar manifold filter £176.52

36-350/30 Stainless steel 500 bar manifold filter £315.56



Low Pressure


78-217/30 In line filter 100 bar £155.00

Manifold filter Screens 36 Series/400

36-401/34 15 mesh stainless steel £9.16









36-394/12 Aluminium support £20.14

05-001-011-27 Stainless steel spring £16.40

36 Series / 600

36-603/34 No 3 200 mesh stainless steel £20.40








36-359/30 Support spring £20.98

36 Series / 025

36-025/01 Blue 30 mesh stainless steel £9.60

36-025/02 Black 60 mesh stainless steel £9.60

36-025/03 Yellow 100 mesh stainless steel £9.60

36-025/04 Red 150 mesh stainless steel £9.60

36-025/05 White 200 mesh stainless steel £9.60

Filter screen selection guide

Mesh 200 100 60 30

Material type Stains Varnishes Lacquers Latex Heavy latexPolyurethanes Enamels (solvent) Enamels (Latex) Block fillerSolvent based paints Solvent based paints Elastomeric

Tip range 0.007in - 0.013in 0.013in - 0.015in 0.015in - 0.029in 0.031+.

This is a general guide only. Failure to clean filters regularly will affect sprayperformance. Finer mesh sizes are available for cricticalapplications.

36 Series / 100


36-105/34 Orange 50 mesh stainless steel £21.34





36 Series / 200


36-205/34 Orange 50 mesh stainless steel £26.22





37 Series / 300



329 Series

329-239 Black short 60 mesh £6.00

329-240 Blue short 100 mesh £6.00

329-241 Black medium 60 mesh £7.00

329-242 Blue medium 100 mesh £7.00

329-243 Black long 60 mesh £8.00

329-244 Blue long 100 mesh £8.00

Spray gun and line filters/screens329 Series Gun filters (2 packs)

329-154-K2 Black 60 mesh £6.50

329-155-K2 Blue 100 mesh £6.50

329-132-K2 Orange 50 mesh £6.50

329-133-K2 Blue 100 mesh £6.50

36 Series Gun handle filters(10 packs)

36-030-K10 Green 30 mesh £22.80

36-060-K10 White 60 mesh £22.80

36-100-K10 Yellow 100 mesh £22.80

36-150-K10 Blue 150 mesh £22.80

36-200-K10 Red 200 mesh £22.80

35 Series AAA Filters (10 packs)

35-030- K10 Green 30 mesh £19.50

35-050-K10 White 50 mesh £19.50

35-100-K10 Yellow 100 mesh £19.50

35-180-K10 Red 300 mesh £19.50

STANDARD SCREEN CONVERSION

Screen Mesh Thousands Microns Mailles cm2

15 0.040in 1000 5030 0.020in 500 20040 0.015in 425 30050 0.012in 350 40060 0.010in 250 73066 0.009in 225 85077 0.008in 205 100086 0.007in 175 1500

100 0.006in 150 2000120 0.005in 125 2500150 0.004in 100 4000165 0.0036in 90 5000200 0.003in 75 7000250 0.0024in 60 10000300 0.002in 50 12000400 0.0015in 38 20000

76

section five

77

Fluid filter housings and screensprice list

36 Series In line filter assemblies

36-UK-1 1/4 x 1/4 NPSM (M)/(M) £92.88

36-UK-2 1/4x 3/8 NPSM (M)/(M) £92.88

36-UK-3 3/8 x 3/8 NPSM (M)/(M) £92.88

36 Series filter screen (Kremlin TM)

36-1051-K10 Pack of 10 screens 50 mesh £18.75



71 Series Swivel disc tip filter housings

71-110/2 1/4 x 1/4in BS, (M/F) £88.86

71-220/2 1/4 x 1/4 NPSM (M/F) £88.86

71-410/2 3/8 x 1/4 BSP (M/F) £88.86

71-420/2 3/8 x 1/4 NPSM (M/F) £88.86

71-450/2 3/8 BSP(M) x 3/8 NPSM (F) £88.86

71-480/2 3/8 BSP(M) x M16 (F) £88.86

71-880/2 M16 (M) x M16 (F) £88.86

Disc tip filters and housings36 Series Disc tip filters

36-020-K10 30 mesh pk 10 £49.96

36-009-K10 60 mesh pk 10 £49.96

36-005-K10 100 mesh pk10 £49.96

36-003-K10 200 mesh pk10 £49.96

72 Series Housings for disc tip filters

72-110/2 1/4 BSP (M/F) £53.34

72-220/2 1/4 NPSM (M/F) £53.34

72-440/2 3/8 BSP (M/F) £53.34

72-520/2 3/8 BSP (M) x 1/4 NPSM (F) £53.34

72-880/2 M16 x 1.5 (M/F) £53.34

78 Series Housings for disc tip filters

78-164-K(60) 60 mesh £39.98

78-164-K(100) 100 mesh £39.98

78-164-K (200) 200 mesh £39.98

Low pressure filter assemblies/screens36 Series/750

36-750/30 St/s housing 3/8 BSP (M/F) £45.16

36-752/12 Aluminium holder 3/8 BSP (M/F) £24.00

78-111/34 QD Filter housing 3/8 BSP (M/F) St St £195.00

78-111/27 QD Filter housing 3/8 BSP (M/F) Alum £135.00

* by enquiry only

36 760 Series Filter screens packs of 50

36-760-K50 White 300 micron £109.70

36-761-K50 Blue 112 micron £109.70

36-762-K50 Red 80 micron £109.70

36-763-K50 Green 60 micron £109.70

36-764-K50 Orange 30 micron £118.72

36-765-K50 Brown 20 micron £118.72

36-766-K50 Pink 185 micron £118.72

78 Series Pressure tank filter

78-350/30 St/S tank filter 3/8 BSP (M/F) £105.54

78-351 White screen 60 mesh £3.76

78-352 Yellow screen 100 mesh £3.76

Conventional Spray gun suction filters36 Series (10 and 100 packs)

For tube diameter 6.5 to 8mm

36-501-K10 Blue 80 mesh £17.20

36-501-K100 Blue 80 mesh £190.38

36-508-K10 White 80 mesh stainless steel £46.68


For tube diameter 8 to 10mm

36-512-K10 Yellow 100 mesh £20.96

36-512-K100 Yellow 100 mesh £190.38

36-515-K10 Red 165 mesh £20.96

36-515-K100 Red 165 mesh £190.38



Gravity gun filters36-531-K10 Blue 80 mesh (pk10) £9.50

Suction FiltersBell Type

311 000 Bell Kit (M)15 x1 (F) £16.36

312 000 Bell Kit 1/2 BSP (F) £16.36

314 000 Cap M15 x 1 (F) £7.68

315 000 Cap 1/2 BSP (F) £7.68

306 055 Disc screen 30mesh £6.30

306105 Disc screen 50mesh £6.30

313 000 Spring clip £3.92

Barrel Type

316 000 Filter assy 30 mesh £17.88

317 000 Filter assy 60 mesh £17.88

307 030 Filter screen 30 mesh £7.52


320 000 Adaptor M28 to M15 £6.30

321 000 Adaptor M28 to 3/8 BSP £6.62

322 000 Adaptor M28 to 1/2 BSP £10.26

323 000 Adaptor M28 to 3/4 BSP £10.24

324 000 Adaptor M28 to1in BSP £13.90

36 Series/450

Larger Capacity Suction filter assys.

36-450/42 Green 1in BSP (F) £40.18

36-452/42 Orange 1/2 BSP (F) £40.18

36-453/42 Black 1/2 BSP (F) £40.18

36-454/42 Blue M28 x 1.5 (F) £40.18

36-455/42 Red M15 x 1 (F) £40.18

36-456/42 Yellow 1in push on £40.18

36-420 Cap seal £6.34

36 Series/029

Stainless Steel Pan Filter.

36-029/01/** 30 mesh £18.00

36-029/02/** 60 mesh £22.00

**Add thread detail to part number eg 36-029/01/3/4in

Choose from sizes available:-

1in, 3/4in, 1/2in, 3/8in, M28, M15.

‘Rat’ CatchersRAT-329153 Suction strainer £6.20

RAT-329152 Suction strainer £8.00

RAT-329120 Double mesh £6.50

RAT-329122 Double mesh £6.50

RAT-329134 Single mesh £6.50

order ref description r.r.p order ref description r.r.p order ref description r.r.p


78

Easy Clean System - courtesy of Morecheck Ltd

section six

79


Fluid regulators and back page 80pressure valve High pressure

Pressure gauges page 81

Pulation chambers page 82

Fluid regulators and back page 83pressure valve Low pressure

Ball valves low pressure page 84

Non return valves page 84

Quick detach fluid coupling page 84

Manifold page 84

Needle and Ball valves high pressure page 85

Paint Heater 350 bar page 86

Pump Overrun valve page 87

Price list page 88



Correct pressure and flow is essential to ensure the best results in

finishing applications. Exitflex provide quality equipment solutions to

aid production demands. The equipment shown in this fluid control

selection is designed to help users to achieve the best operating

conditions with economy and to reduce waste in production. For any

further assistance please do not hesitate to contact our staff who will

be pleased to assist you as required.

80

section six

81

Back pressure valve 78-203/34High pressure back pressure valve 300 bar MWP forhot spray or recirculating systems.Stainless steel

3/8 BSP (F) inlet 2 x 3/8 BSP (F) outlets

Dimensions H 170mm Diameter 60 mmWeight 100gm

PRESSURE GAUGESManifold and riser580-202 Gauge manifold (M)16 (F) x M16 (M)

580-203 Gauge manifold 1/4 BSP (F) x 1/4 BSP (M)

580-220 Riser for gauge 1/4 BSP

Dry gauges 63mm diameter 580-215 Dry, 0-160psi 1/4 BSP bottom inlet,

glass window. 63mm dia

580-217 Dry, 0-30psi 1/4 BSP bottom inletpolycarbonate window 63mm diameter

580-218 Dry, 0-6bar 1/4 BSP bottom inlet, polycarbonate window 63mm diameter

Glycerine filled gauges 63mm dia Plexiglass, stainless body

580-211 1/4 BSP bottom inlet 400bar

580-212 1/4 BSP bottom inlet 3000psi



580-221 1/4 BSP bottom inlet 0-30psi

580-219 Diaphragm controlled gauge in stainlesssteel. Glycerine filled, stainless steel casePlexiglass window. Ideal for circulating systems.

0-160psi

1/4 BSP bottom inlet



78-203/34

7030/x

580-203

580-202& 580-211

580-219

580-220

FLUID REGULATORS AND BACK PRESSURE VALVESHigh pressureManually controlled fluid regulator 7030High pressure manually controlled fluid regulatordesigned for commercial duty in the paint spraymarket. The unit is constructed from 304 stainlesssteel. Inlet (F) and outlet (M) M16 x1.5.

Three pressure ranges are available

7030/1 0-69bar

7030/2 70-140bar

7030/3 110-250bar

The pressure range is controlled by the 3 differentcontrol springsControl springs

21/0011093/102 Red 0-69bar

21/0011091/101 White 70-140bar

21/0011092/096 Gold 110-250bar

Dimensions H 175mm Diameter 70mmWeight 2.7kg approx

Pneumatically controlled fluid regulator78-014/34 High quality pneumatic control stainless steel wettedfluid regulator for the pressure range, 70-345bar. This regulator was designed for paint and masticduties.The unit features a diaphragm operated piston,powered by compressed air for fluid pressureadjustment. The aluminium control housing has adirect mounted air pressure regulator, this may beremoved and the unit can be controlled from aremote location such as from a control panel.The regulator has 2 x M6 female threaded sockets inthe base for convenient mounting.

Input pressure 70- 345bar

Inlet and outlets 3/8 BSP(F)

Gauge port 1/4 BSP(F)

Diameter Air 165mm Fluid 70mm

Weight 4.8kg approx

78-014/34

82

section six

83



PULSATION CHAMBERS

Plastic pulsation chamber 16500-225Plastic pulsation chamber with gauge, 8bar MWPinlet 1/2 BSPDimensions H 87.5mm Diameter 17.5mm

Weight 3kg approx

35 l/m pulsation dampener 22-001-000-00Stainless steel wetted pulsation dampener withcompressed air controlled diaphragm. Fluid inlet 1BSP (F). Air inlet 3/8 BSP(F). suits pumps withoutput ref to 35 litres per minute. Complete withcheck valve and gauge.Dimensions H 210mm Diameter 320mm

Weight 16.6kg approx

76 l/m pulsation dampener 22-008-000-00Stainless steel wetted pulsation dampener withcompressed air controlled diaphragm for largercirculating systems. Fluid inlet 11/4 BSP (F). Air inlet3/8 BSP(F). Suits pumps with output up to 76 litresper minute. Complete with check valve and gauge.MWP 21bar Dimensions H 160mm Diameter 310mm

Weight 29.5kg approx

22-007-000-01Stainless steel pulsation bottle suit low or highpressure (up to 345bar) can accept filter. Inlet 1/2 BSP (M), outlet 1/2 BSP (F)Dimensions H 520mm Diameter 84mm

Weight 12kg approx

FLUID REGULATORS AND BACK PRESSURE VALVES-Low pressureGeneral duty fluid regulator 78-204/34 Single operator, low pressure fluid regulator with fullspares availability. Stainless steel wetted parts. Pressure range. 0-10 bar Inlet and outlet 1/4 BSP(M) Fitted gauge 0-100psi range.Dimensions H 135mm Dia 70mm Wt 900gm

Manual control fluid regulator 78-224/34 Manual control. Low pressure fluid regulator forindustrial and automotive continuous duty. stainless steel wetted parts section Quick change valve cartridge. Locking control screw Pressure range 0-10barInlet and outlet 3/8 BSP(F) Gauge port 1/4 BSP(F)Inlet pressure 18 bar maximumMaximum flow 5.61L/mAdjustment range 0.3 to 10barOptional mounting bracket 78-184/30

Remote control fluid regulator 78-225/34 This valve is a pneumatic diaphragm version of the 78-224 regulator. The features and performance are asthe manual control unit shown above. Dimensions H 104mm Dia 74 mm Wt 820gmOptional mounting bracket 78-184/30

Back pressure valves low pressure78-207/34Back pressure regulating valve with stainless steelwetted section for circulating systems.Regulated pressure 7 bar maximumFlow 54 l/min maximumInlet pressure 0-10bar maximumInlet and outlet 1/2 BSP (F) Gauge port 1/4 BSP (F)Dimensions H 165mm Dia 74mm Wt 900gm Optional mounting bracket 78-184/30

78-227/34Back pressure regulating valve with stainless steelwetted section for larger circulating systems. Regulated pressure 7 bar maximumFlow 18 l/min maximumInlet pressure 0-10bar maximumInlet and outlet 1in BSP (F) Gauge port 1/4 BSP (F)Dimensions H 165mm Dia 100mm Wt 3.5kg

16500-225

22-001-000-00

22-008-000-00

22-007-000-01

78-204/34

78-224/34

78-227/34

78-207/34

78-225/3478-184/30

84

section six

85

Fluid control equipmentBALL VALVES LOW PRESSURE78-209/15 LP ball valve 1/4 FBE Brass nickel

plated

78-215/15 LP ball valve 3/8 MBE Brass nickelplated

78-216/15 LP ball valve 3/8 FBE Brass nickel plated



NON RETURN VALVENon return valves 20 bar mwp. 400 bar mwp.Stainless steel Non return valves, for low pressureuse in paint recirculating systems. Opening to flowpressure 2 bar (29psi). Available in 1/4 BSP. Twomodels,

78-182/30 1/4 BSP MxF PTFE ball seat for reliable sealing. MWP 20 bar.

78-183/30 1/4 BSP MxM,

QUICK DETACH FLUID COUPLING Quick detach low pressure hi-flo fluid coupling.Fully stainless steel, easy to operate, high flow rate,stems and coupling available separately.

78-311/34 Fluid QD connection - new design featuring hexagon body

78-312/34 New design stem for above featuring loose nut

6 PORT MANIFOLD

78-173/30 Stainless steel manifold MWP 250 bar6 x 1/4 BSP(F) ports.

78-174/30 SStainless steel manifold MWP 250 bar6 x 1/4 NPSM(F) ports.

78-200/34

78-201/34

78-205/4

78-205/34

78-206/4

78-218/4

78-209/34

78-210/34

NEEDLE AND BALL VALVESHIGH PRESSUREThe Exitflex range of ball and needle valves areexcellent quality and designed to meet therequirements of the most popular applications.

Needle valvesNeedle valves are useful for high pressure air orgradual fluid pressure release.

78-200/34 1/4 needle shut off valve 2 x 1/4 BSP (F) inlets. Stainless steel. 6000psi MWP

78-201/34 3/8 needle shut off valve 2 x 3/8 BSP (F)inlets. Stainless steel 6000psi MWP

Ball valvesBall valves with seals specified for solvent, oils andchemical resistance and are ideal, reliable and easyto use for all those demanding applications where fullflow is required.

78-205/4 High pressure ball valve. 400bar MWP 1/4 BSP F x 1/4 BSP (F)

78-205/34 High pressure ball valve. 400bar MWP1/4 BSP F x 1/4 BSP (F). Stainless steel

78-206/4 High pressure ball valve. 400bar MWP3/8 BSP F x 3/8 BSP (F)

78-218/4 High pressure 3 way L ported ball valve3 x 3/8 BSP (F). 400bar MWP

78-209/34 High pressure stainless steel ball valveForged body 304 stainless steel. 250bar MWP Long operating lever.Solvent resistant seals. 1/4 BSP (F) x 1/4 BSP (F)

78-210/34 High pressure stainless steel. 250bar MWP ball valve. Forged body 304 stainless steel. Long operating lever.Solvent resistant seals. 3/8 BSP (F) x 3/8BSP (F)


78-209/15

78-215/15

78-216/15

78-324/30

78-182/30

78-311/34 78-312/34

78-173/3


section six

87

41 005 000 00CE approved, modern, easy to service high qualitypaint heater. Single phase electric paint heater. Wetted sectionsare aluminum. This unit has been designed forcontinuous duty with a wide range of materials.

Convenient access to controls and features an outletdial thermometer at the take off position.

A full range of service parts is available for this item.

www.exitflex.co.uk

1/2 BSP ported with manual (low force) start buttonsuitable for frequent use. ATEX approved.

Designed to control pumps operating in unmannedlocations, such as paint mix rooms, which can sufferfrom failures or leaks causing rapid dissipation ofpaint or solvent contents from the supply drums,causing financial loss, a big clean up and fire hazard

Fit an overrun valve and avoid these problems, allmodels feature sensitivity control as standard.

Audio and visual indicators also available by enquiry Model B-013952

Pump overrun shut down system

Paint heater Pump over run shut off valve230 Volt 50/60 Hz

3000 Watts.

14 Ampere.

MWP 350bar.

Inlet 3/8 BSP(F).

Outlet 3/8 BSP(M).

Maximum set temp. 100ºC.

41 005 000 00

88 www.exitflex.co.uk

Fluid control equipment price listorder ref description r.r.p order ref description r.r.p

Fluid Regulators and Back pressure valvesHigh PressureManual control

7030/1 Regulator 0-69bar £580.00

7030/2 Regulator 70-140bar £580.00

7030/3 Regulator 110-250bar £580.00

21/0011091/101 White spring £25.06

21/0011093/102 Red spring £25.06

21/0011092/096 Gold spring £25.06

78-203/34 Back pressure relief valve 300 bar £185.00

Pneumatic control

78-014/34 Regulator pneumatic control 3/8 BSP(F) inlets 70-345bar MWPStainless steel wetted surfaces £529.00

Gauges and Gauge manifoldsManifolds

580-202 Manifold M16 (F/M) £37.10

580-203 Manifold 1/4BSP (F/M) £37.10

580-220 Riser tube 1/4 BSP (F/M) £7.08

Dry gauges 63mm diameter bottom inlet glass window

580-215 1/4 BSP 0-160psi £19.78

580-217 1/4 BSP 0-30psi £13.38

580-218 1/4 BSP 0-6bar (87psi) £13.38

Glycerine filled 63mm bottom inlet Plexiglass window

580-211 1/4 BSP 0-400bar £23.94

580-212 1/4 BSP 0-3000psi £23.94

580-213 1/4 BSP 0-100psi £23.94

580-216 1/4 BSP 0-2000psi £23.94

580-221 1/4 BSP 0-30psi £23.94

Diaphragm control 63mm gauge glycerine filled Plexiglass window

580-219 1/4 BSP 0-160psi £120.00

Other pressures by enquiry

Pulsation ChambersLow pressure

16500-225 Plastic dampener 8bar 1/2 BSP(F) £411.12

22-001-000-00 Stainless steel dampener £518.50

22-008-000-00 Stainless high capacity dampener £846.50

High pressure22-007-000-01 Stainless tubular pulsation bottle £350.45

Fluid Regulators & back pressure valves Low PressureManual control

78-204/34 Regulator 0-10bar 1/4 BSP(F/M) £128.00

78-224/34 Regulator 0-10bar 3/8BSP(F) £171.50

78-184/30 Mounting Bracket £12.00

Pneumatic control

78-225/34 Regulator 0-10bar 3/8 BSP(F) £182.35

Manual control

78-207/34 Back pressure valve 0-10bar1/2 BSP (F) inlets £212.26

78-227/34 Back pressure valve 0-10 bar 1in BSP(F) £395.35

Ball valves Quick detach connector Low pressure78-182/30 1/4 BSP(MF) non return valve £79.68

78-183/30 1/4 BSP(MM) non return valve £69.68

78-208/15 1/4 BSP swivel x (M) £12.82

78-209/15 1/4 BSP (F) x (F) £7.60

78-215/15 3/8 BSP (M) x (M) £10.00

78-216/15 3/8 BSP (F) x (F) £7.68

78-323/30 1/4 BSP(M) x (M) stainless steel £27.08

78-324/30 3/8 BSP (M) x (M) stainless steel £27.08

78-311/34 QD sealing connector stainless steel £46.48

78-312/34 QD male stem 3/8 BSP (F) 10 bar stainless steel £24.56

Needle valves High Pressure78-200/34 Needle valve 6000psi

1/4 BSP (F) inlet/outlet £36.00

78-201/34 Needle valve 6000psi3/8 BSP (F) inlet/outlet £40.00

Ball valves High pressure78-173/30 6 port stainless manifold 1/4 BSP (F) £399.00

78-174/30 6 port stainless manifold 1/4 NPSM (F) £399.00

78-205/4 400bar 1/4 BSP (F) in/out £26.50

78-205/34 400bar 1/4 BSP (F) in/outstainless steel £50.00

78-206/4 400bar 3/8 BSP (F) in/out £30.00

78-218/4 3 way L ported 400barball valve all 3/8 BSP (F) £80.00

78-209/34 Stainless steel forged 250bar 1/4 BSP (F) inlet/outlet £62.75

78-210/34 Stainless steel forged 250bar 3/8 BSP (F) inlet/outlet £74.50

Paint Heater41.005.000 00 PH-230-AC. CE approved. 1ph 230v

Paint heater. 350 bar MWP £1495.00

Pump Overrun valveB-013952 Overrun shut off valve 1/2 ported ATE

app 100psi inlet pressure £860.00

section seven

89

Agitators and mixing tanks

Agitator, pneumatic hand held page 90

Agitator pail mounted page 91

Agitators lid mounting, page 91

Elevators for agitator and pump mounting, page 92

Mixing tanks custom design page 94

Flexible IBC agitator assembly page 95

Price list page 96

Carriage & packing charges page144


Paint and other coatings frequently need vigorous and often

continuous agitation to avoid settlement and colour variation. Efficient

agitation is therefore important. A selection of equipment is available

to meet this this challenge, the following represent popular choices to

meet this demand. Mixing tanks are also vital in industrial systems

where larger volumes of paint are in use, often with circulating

systems. The examples shown will meet many applications but other

designs are can be supplied to special order. Call us for assistance

should you need something different, we will do our best to assist.

90

section seven

91

LID MOUNTED AGITATOR

For preparation and mixing of liquid materials 200litre (45 gallon) air driven paint mixer mounted onstainless steel lid.

Alternative

• Stainless lid with handles

• Choice of air motors

• Stainless steel shaft

• Adjustable paddle detail

• Four lid fixing positions

Type MRM-50Features a 0.42hp direct drive air motor for greatermixing ability either for heavier materials or in largerquantities up to 25 litre capacity.

• Comfortable T-bar handle grip

• Light weight

• High quality function

• Long service life

• Integral speed control & silencer

Technical DataOperating air pressure 0.5 to 5.6bar

Speed @ 5.6bar 6000RPM

Air consumption 12.5CMF @ 5.6bar

Output 0.33kW

Weight (excluding stand) 2.0kg

Shaft length 500mm

Spiral paddle diameter 80mm

Agitators and mixing tanks


HAND HELD PNEUMATICAGITATORS

Type PM60 This pneumatic agitator is perfect for preparation andmixing of most paints in containers of 5 and 10 litrecapacity. Some materials, such as lacquer may alsobe agitated in larger volume containers.

• ATEX approved

• Comfortable handle

• Can be hand-held/flange mounted or on stand

• Light weight


• Stainless steel shaft & propeller



Technical DataOperating air pressure 0.5 to 8bar

Speed @ 4bar 900rpm

Air consumption 100 litres/min

Output 60Watt

Weight approx (exc stand) 1.1kg

Shaft length 440mm

Propeller diameter 70mm

60-200flange mountingconnection

Type PM60on adjustable heightstand (60-100)

MRM2-80spiral paddle

MRM 050

A choice of rotaryimpellor blades areavailable60-614 55mm Ø60-615 100mm Ø

PAIL MOUNTED AGITATOR

PM60-325/0The Exitflex 60-325/0 package makes thepreparation and use of spray applied materialssimple and clean to handle whilst at the same timehelps to ensure that your material achieves andremains at the correct specification - ready for useIt comprises a standard industrial 25 litre pail withstainless steel lid, which fastens to the pail usingthree external fixings.The lid itself is spun and laser profiled has afiller/viewer point with pear shaped access plate, a1/2 BSP male connection fluid suction tube (reachingthe bottom of the pail) and a PM-60 pneumatic mixer

• Light weight


• Stainless steel shaft & propeller



Technical Data

Operating air pressure 0.5 to 8bar

Speed @ 4bar 900rpm

Air consumption 100l/min

Output 60 Watt

Weight approx 3.8kg

Propeller diameter 70mm

PM 60-250 pail agitator is also available withstainless steel pails as follows:-

60-320/34 20 litre pail

60-340/34 40 litre pail

60-325/025 litre pail mountedPM60 agitator

200 litre agitatorassembly lid mountedwith ARM 1251.25hp rotary air motor

Drum not included

M20 Three piston rotary air

agitator motor

M20/19 Mounting pillar

AF 350 Silencer not illustrated

78-052 Speed controller not illustrated

60-617 2 vane stainless blade

PTP-162 3 vane nylon blade

PTP-127 Paddle blade

60-600

Agitator kits

M20/500 Kit for use with the 08 034000 00 elevator comprising;air regulator, hose set, M20rotary air motor withmounting pillar, shaft anddual mixing blades

ARM-125/500 Kit for use with the 08 034000 00 elevator comprising;air regulator, hose set,1.25hpdirect drive ARM-125 rotaryair motor with mounting, shaftand dual mixing blades

60-620Alternative

assembly withM20 motor

92

section seven

93

Pump elevators


200 litre model This elevator is a robustly constructed unit for longand continuous use in industrial applicationsinvolving 200 litre paint drums.A powerful air ram is employed with a sturdy guidebar to prevent swing and allow smooth operation andcontrol.Fitted with pneumatic controls and supplied with pickup suction tube and return tubes in stainless steel.The lifting arms and drum lid are also fabricated fromstainless steel.The unit is supplied as a free standing unit with theram mounted on a substantial 10mm steel plate witha drum stop to position the drum correctly whenplacing it onto the base.The standard unit does not include a pump or anagitator which need to be ordered separately.

Dimensions Base plate 71cm x 110cm

Closed height 165cm

Raised height 295cm approx

Part numbers 08 034 000 00 This model comes without

agitator.

08 034 000 02 This model comes complete withagitator assembly ready for use.

25 litre model This smaller unit is designed for use with 25 litredrums. Sold as a complete assembly with air drivenagitator, it features stainless steel wettedcomponents. The unit raises and lowers on a pneumatic ram, andcan also swing in an arc .Compact and mounted on a robust stand, Thestandard setting on the lid height is 402mm but canbe adjusted.

Dimensions Stand footprint 500mm x 600mmClosed height 1159mmRaised height 1700mm

Part number 08 035 000 02 This model comes complete with

agitator assembly ready for use, illustrated below

Model 08 034 000 02Elevator illustrated with,M20/500 agitator kit Thealternative ARM-125/500rotary agitator kit may bespecified at an increasedprice. (pump not included)

08 035 000 02comes with agitatorassembly ready for use

94

section seven


Agitators and mixing tanks Agitators and mixing tanksCUSTOM DESIGN MIXING TANKSExitflex now design manufacture and supplystainless steel mixing tanks to meet your exactspecifications.Supplied with pneumatic operation mixers,filler/viewers, bottom outlet ball valve connections -other specificatins to suuit your requirements.

EMT -045typical 45 litre model

EMT -100 typical 100 litre model

FLEXIBLE IBC AGITATORASSEMBLYThe Exitflex 60-700 agitator provides effective mixingin flexible IBC 1000 litre industrial bulk containerswhich is so vitally important.Frequently found where large volumes of coatingsare to be used the IBC is afavoured solution by many users.The 60-700 Agitator includes the following importantdesign features.

• Low air consumption air motor assembly.

• Low noise operation.

• Effective spiral blade for active agitation, lift andcirculation of the material in the container.

• The spiral blade is housed in a protective stainless steel cage, this is to prevent damage tothe plastic inner bag, particularly at installation and removal.

• Mounted in a housing with thrust bearings the air motor units are designed for continuous duty.

• The 60-700 comes complete with the screwed mounting to thread direct into the container filler neck, ready for use.

• Shaft length 870mm

This agitator is also very suitable foruse with Rigid IBC containers

Contact our sales department for any assistancerequired.

Illustrated here is a custom built unit featuring a 45litre stainless steel mixing tank mounted on a standthat also carries the 1:1 diaphragm pump, filter andcontrol unit

96

Agitators and mixing tanks price listorder ref description r.r.p order ref description r.r.p

Agitators, hand held PM60 Air driven rotary agitator £300.00

60-100 Agitator stand £58.00

60-200 Lid mounting for PM60 £30.00

MRM-050 Air driven agitator with dual grip handle £396.00

78-052 Speed controller £18.00

AF-350 Silencer £19.50

MR2-80 80mm diameter mix blade £21.50

Agitators lid mounted 60-325/0 Lid mounted PM60 agitator

on 25 litre steel pail £467.00

60-320/34 Lid mounted PM60 agitatoron 25 litre stainless pail £536.00

60-340/34 Lid mounted PM60 agitatoron 40 litre stainless pail £614.00

60-600 Lid mounted ARM-125 agitatorkit for 200 litre open top drum £725.00

60-620 Lid mounted M20 agitatorkit for 200 litre open top drum £525.00

Agitator air motorsM20 Three piston rotary air

agitator motor £154.50

M20/19 Mounting pillar kit £75.00

ARM-125 Rotary 1.25hp direct drive air motor £303.00

60-614 Rotary blade 55mm dia £55.00

60-615 Rotary blade 100mm dia £58.00

60-617 2 vane stainless steel blade £49.50

PTP-162 3 vane nylon blade £19.50

PTP-127 Paddle blade £22.75

Agitator kitsM20/500 Kit for use with the 08 034 000 00

elevator comprising; air regulator,hose set, M20 rotary air motor with mounting pillar,shaft and dual mixing blades £405.00

ARM-125/500 Kit for use with the 08 034 000 00 elevator comprising; air regulator, hose set,1.25hp direct drive rotary ARM-125 rotary air motor with mounting, shaft and dual mixing blades £555.00

Elevators08 034 000 00 Elevator for use with 200 litre

drums excluding agitator £1600.00

08 034 000 02 Elevator for use with 200 litre drums wth agitator assembly £2005.00

08 035 000 02 Elevator for use with 25 litre pails incl rotary agitator. £1350.00

Mixing TanksWe invite your enquiries for mixing tanks to your customspecification. Experience has shown us that standard tanksoften do not match customer specifications.We do offer two standard stainless steel mixing tanks of thepattern illustrated on page 94.

EMT-045 45 litre top outlet stainless steel mixing tank. Basic tank with access lid, suction and return tubes and complete with bottom outlet drain and valve £975.00

EMT-100 100 litre top outlet stainless steelmixing tank as above but 100 litre capacity. £1395.00

Flexible IBC container agitator assembly 60-700 Air motor driven agitator, featuring

spiral blades in a stainless steel cage for mounting direct into the 1000 litre container. £1495.00

www.exitflex.co.uk

section eight

97

Pressure feed equipmentand air spray extensions

Pressure feed equipment page 98and spare parts

Air atomising spray page 99extensions

Air atomising internal page 100spray packages

Air spray equipment page 101and accessories.

Price list page 102



Pressure feed tanks for material feed are very popular.

When an internal air spray extension is required, it is essential to

pressure feed the coating. The Exitflex internal coating equipment

solves many application problems, simply and efficiently.

In this section you will find a selection

of equipment to suit many applications.

98

section eight

99

Pressure feed equipment


Pressure Feed Containers We are pleased to offer awell finished, robustlyconstructed, selection ofpressure feed containers.These are produced fromexcellent quality materialsand fitted with qualitycomponents. The design provides reliableperformance for demandingindustrial duty. Theproducts are CE markedand are provided with test

certificates. They are available with or withoutagitators and the alternatives of manual or automaticagitators can be found within the range of models.

Model range

Model Capacity Agitator Outlet

EPT-4 4 litre None Top

EPT-10 10 litre None Top

EPT-10M 10 litre Manual Top

EPT-10A 10 litre Automatic Top

EPT-10B 10 litre None Bottom





Other sizes by enquiry.

Spare parts

PTP-103 10 litre lid gasket

PTP-118 20 litre lid gasket

PTP123 40 litre lid gasket

PTP-119/34 10 litre stainless liner



PTP-112 10/20 litre pressure gauge

PTP-126 10/20 litre pressure regulator

EPT 2. 5 Pressure CupThis 2.5 litre stainless steelpressure cup is an ideal sizeto allow the spraying ofsmaller quantity ofmaterials. A suction orgravity spray gun holds amuch smaller quantity and itwastes time and can affectfinish by repeat filling andmixing. The range ofmaterials that can behandled is also moreflexible.

• Quick release clamp lid, saves time and avoids sticking lid problems

• Carry handle, hook

• Lid mounted pressure release valve

• Greater manoeuverability compared with cup guns

• 4 bar maximum working pressure

• Built in air regulator

• All stainless steel wetted

• 3/8BSP(M) fluid connection

• 1/4BSP(M) air connection

Part numbers

EPT 2.5 Cup assembly (no hoses)

EPT 2.5K Cup assembly with 1.25m hose set

Flexible Extensions

PA131J230Flexilance 1 metreincluding 38-230 fixedatomiser (excl. foggingchamber) Flexible extensions areavailable using the38-219 or 220 spinningatomiser with 1/4in borenylon hose.

Slimline Extensions 38-501

Slimline angled fixed fan atomiser complete withfogging chamber to suit and choice of 6in, 12ln or18in length, 11mm OD

Extension component range

38-442 Fogging chamber to fit BRPHVLP gun38-452 Fogging chamber to fit Iwata W20038-411 Fogging chamber to fit

DeVilbiss, Sagola (not HVLP)38-411/HD Fogging chamber to fit

DeVilbiss JGA/HD38-438 Fogging chamber to fit

DeVilbiss, Compact Gun38-471 Fogging Chamber AAA fit

Graco Alpha plus, AAG 2000

38-471-1 Fogging chamber, AAA.fit Graco G40

74-021 Coupling 1/2 JIC(M) x (M)

38-002 Adaptor 1/2 JIC(M) 1/4in UNF(F)

38-210 Spinning atomiser foward, side, back

38-220 Spinning atomiser, side sprayonly

38-230 Fixed atomiser, for flexi lance

32-306/16 Lance 6in length - rigid

32-312/16 Lance 12in length- rigid




To assemble a complete lance for gun mountingselect:- 1 fogging chamber to suit the gun you have,or purchase 1 TLPF gun, 1 Lance,(length to suit), 1 x32-002 adaptor, 1 atomiser to your choice

An AAA fogging chamber must have a pre orifice,size to suit. These systems require pressure feed.

38-002

38-220

38-230

Air atomising spray extensions andequipment

Standard 12in extension for DeVilbless JGA/GTI spray gun withforward, backward and side spray 360º atomiser nozzle

The Exitflex 38 series conventional low pressureinternal spraying equipment was designed to be asimple, needleless, and an easy to operate methodof applying coatings such as wax or paint tointernal surfaces. The design was to apply acoating rather than a fine finish.The system requires the coating to be pressure fedto the atomisers which are of internal mix design.In general, the equipment functions correctly withequal fluid and air pressures, ie 1bar fluid and 1 barair pressure. Most coatings atomise well in the 1-4bar range. Keep the set pressures equal. Fineadjustment can be made as required. Too much fluid pressure and the coating will beforced into the air passages, too little or too muchair pressure and the system will not operate. Thesystem requires dual regulation ie air and fluidpressures need to be regulated individually. Whenthe equipment is set up correctly then the user willachieve the proper function.The system operates with most coatings, howeverit should be noted that coatings with sand orfibrous fillers are not suitable.The atomisers are rotary with a choice of side onlyor forward side and rear spray. A simple fixedatomiser is also available. These are not designedfor use with Airless systems. Air is required togenerate rotation. Some air assisted airlessversions are availableThere is a select programme of fogging chambersfor use with popular spray guns from majormanufacturers.

PA131J230

100 101

section eight


Equipment packagesThere is now available, a standard range of packagesfor internal spray applications. The packages includeall the components needed to assemble an outfitwhich can be ready for use without delay. Custompackages can of course be built if required, just askfor assistance. Select the standard package which will best meetyour needs. The equipment is complete, easy to setup and is quickly ready for use.Order by the package number in the left column.(Read across to see what is included).

Optional extras are available for fluid filtration aslisted on the facing page.The largest OD of the atomizers is 11mm and themaximum OD of the rigid extension is 19mm acrossthe hexagon. Slimline extensions can be produced tospecial order, enquire.

Packages for AAA, air assisted airless are notincluded. Details of the AAA components which areavailable are shown on the facing page.

Internal Spray EPT2.5 EPT10 EPT10M EPT10A TLPF704 Hose Set Hose Set Flex Rigid 38-220 38-230 Package number FF 1.25m 5m Extn 1m Extn 1m Tip Tip

ISP 100 ✓ ✓ ✓ ✓ ✓

ISP 101 ✓ ✓ ✓ ✓ ✓

ISP 102 ✓ ✓ ✓ ✓ ✓

ISP 103 ✓ ✓ ✓ ✓ ✓

ISP 104 ✓ ✓ ✓ ✓ ✓

Air spray equipment and accessoriesTrio 1.4 Spray GunAn excellent spray gun, of good quality. Well finishedwith stainless steel needle and tip. A well provendesign, easy to service and reliable. Pressure feedmodels are most popular. Ideal for use with theExitflex internal spray extensionsystem. Part number TLPF-704FF

Trio Spares

TL704 Aircap (excludes ring)

TLEX 1.8 needle/nozzle kit

TLFF 1.4 needle/nozzle kit

TLFX 1.2 needle/nozzle kit

Quick Detach Hi Flo Connections50-407 Quick detach hi-flo air connection

1/4BSP(M)

50-437 Quick detach hi-flo air connection1/4BSP(F)

50-408 Quick detach plug 1/4BSP(F)

50-409 Quick detach plug 1/4BSP(M)

80-110 Quick detach ball swivel 1/4BSP(M)

80-115 Quick detach ball swivel 1/4BSP(F)

Air Blow Gun30100 Air blow gun with aluminum body

80-110 80-115

Air Flow Regulator 78-210/0 Mini gun mounting air flowregulator fitted with a glassfronted gauge, light and easy to use.

Turbine Spray Gun TPQ-98 This high quality low pressure turbine gun is an excellent performer, light and well built.HVLP Non bleed.

Viscosity Cups VIS-F4-K2Pack of 2 handy plasticFord 4 viscosity cupswith metal orifice Ford 4

Cleaning Brushes24097-R-K10Cleaning brushes 130mm, nylon bristles (pack of 10)

42-884-214-K10 Cleaning brushes 250mm, nylon bristles (pack of 10)

CBK-500 Cleaning brush kit with 6 differentsizes of brushes, a lube bottle and fine broaches

78 series pressure tank filterFor pressure feed application. 78-351 is colour white78-352 is colour yellow.OD 44mm L 115mm Weight 415gm

78-350/34 Stainless steel 3/8 BSP (F) swivel nut inlet 3/8 BSP(M) outlet 20bar MWP

78-351 60 mesh cone filter element (single)78-352 100 mesh cone filter element (single)

80-110


Pressure feed equipment and air spray extensions price listorder ref description r.r.p order ref description r.r.p

Pressure feed equipmentEPT-2.5 2.5 litre pressure cup. No hoses £166.50

EPT-2.5K 2.5 litre pressure cup c/w hoses £175.60

EPT 4 4 litre container £157.00

EPT 10 10 litre container £240.00

EPT 10M 10 litre container manual agitator £297.00

EPT 10A 10 litre container auto agitator £505.00

EPT 10B 10 litre container bottom outlet £285.00


EPT-20A 20 litre container auto agitator £664.00


EPT 40A 40 litre container auto agitator £713.00

60 and 80 litre containers by enquiry

Spare partsPTP-103 10 litre lid gasket £19.00

PTP-118 20 litre lid gasket £23.00

PTP-123 40 litre lid gasket £23.00

PTP-119/34 10 litre stainless liner £56.00



PTP-112 10/20 litre pressure gauge £17.50

PTP-126 10/20 litre pressure gauge £27.50

Air atomising spray extension components38-442 Fogging chamber AOM, BRP £129.00

38-452 Fogging chamber Anest Iwata W200 £129.00

38-411 Fogging chamber Devilbiss JGA/GTI £129.00

38-411/HD Fogging chamber Devilbiss JGA/HD £140.00

38-438 Fogging chamber Devilbiss Compact £129.00

38-471 Fogging chamber AAA Graco AlphaAAA AAG2000 £236.00

38-471-1 Fogging chamber AAA Graco G40 £236.00

74-021 I/2 JIC(M) x 1/2 JIC(M) £3.60

38-002 1/2 JIC(M) x 1/4in UNF(F) £10.44

38-210 Spinning atomiser forward/side/back £167.66

38-220 Spinning atomiser side spray only £128.70

38-230 Fixed atomiser £57.70

32-306/16 Lance 6in £34.75

32-312/16 Lance 12in £42.00

32-318/16 Lance 18in £45.00

32-324/16 Lance 24in £45.00

32-336/16 Lance 36in £54.00

PA.1.3.0100 J230 Flexible extension £82.00

Air atomising, internal spray packagesISP 100 2.5 litre outfit flexible extension £555.00

ISP 101 2.5 litre outfit rigid extension £662.65

ISP 102 10 litre outfit no agitator £774.00

ISP 103 10 litre outfit manual agitator £822.00

ISP 104 10 litre outfit auto agitator £1029.00

Air spray equipment and accessoriesTRIO 1.4 Spray gun 1.4mm needle nozzle £130.00

Spare parts (Trio)

TL704 Air cap £29.96

TLEX 1.8mm needle and tip £54.00

TLFF 1.4mm needle and tip £54.00

TLFX 1.1mm needle and tip £54.00

Accessories TPQ-98 HVLP gun non bleeder £254.60

30100 Duster gun aluminium £9.50

78-210/0 Ait flow regulator £36.00

VIS F4 K2 Pack 2 viscosity cups £16.00

24097-R K10 Pack 10 brushes £35.00

42-884-214-K10 Pack 10 brushes £24.00

CBK 500 Cleaning brush kit £19.50

SGL -50 Spray gun lubricant £7.92

50-407 QD air 1/4 BSP(M) £17.00

50-437 QD air 1/4 BSP(F) £19.54

50-408 QD plug 1/4 BSP(F) £5.14

50-409 QD plug 1/4 BSP(M) £5.14

80-110 QD ball swivel 1/4 BSP(M) £17.50

80-115 QD Ball swivel 1/4 BSP(F) £17.50

78-350/34 Pressure tank filter stainless £105.54

78-351 60 mesh filter white £3.76

78-352 100 mesh filter yellow £3.76

section nine

103

Airless and air assistedairless spray guns

This selection of quality manual and automatic, Airless and Airless Air

Assisted spray guns, meets the needs of a selection of industries.

Customer preference and choice is also catered for. Applications range

from painting contractors to a variety of industrial uses.

AM250 Manual airless page 104spray gun

GM250 Manual airless page 105spray gunSP90 Manual airless page 106spray gun

SP91 Manual airless page 107spray gun

AAG-2000 Manual page 108AAA spray gun

TRIA Manual AAA page 109spray gun

AP20 Automatic page 110airless spray gun

TRIA Auto airless page 111

AP25 Automatic airless page 98spray guns

AP81 Automatic airless page 113spray gun

Prices list page 116



104

section nine

105www.exitflex.co.uk www.exitflex.co.uk

AM 250 MANUAL AIRLESS SPRAY GUN• 250bar MWP

• Multi purpose airless gun

• CE marked.

• 4 finger trigger

• In handle filter

• 1/4 NPSM(M) fluid inlet fluid inlet

• Sturdy trigger guard

• Lightweight, 495gm approx Including tip and guard.

Optional extra 79-001 1/4 NPSM(M) micro swivel.

AM-250-G. Spray gun illustrated,fitted with a ‘Speedy’ guard andreversible tip.

AM 250 modelsAM-250-GManual 250bar spray gun fitted 1/4 NPSM fluid inlet.7/8in x 14 fluid adaptor. A reversible tip guard isincluded. (Tip not included Specify tip size)

AM-250-WManual 250bar spray gun fitted 1/4 NPSM fluid inlet.11/16 x 16 fluid adaptor. A reversible tip guard isincluded. (Tip not included Specify tip size)

Spare parts for AM250 spray guns

item part number number description1. 36-202. Retaining nut 7/8 x 14 1. 36-207 Retaining nut 11/16 x 162. Airless tip Any type.3. 21-008-K5 Tip Gasket4. 92-003 Needle seat*5 92-014 O ring *6. 250-002. Adaptor 7/8in x 14 (Graco)6 250-007 Adaptor11/16 x 16 (Wagner)7. 250-07 Trigger guard8. 250-08 Trigger assembly9. 250-09 Sealing washer10. 250-10 M3 nut(2)11. 250-11 Trigger pin13. 250-13 Push pin.(2)14. 250-14 Needle assembly 15. 250-15 Spring 16. 250-16 Closure cap17. 250-17 Handle seal 18. 250-18 Handle only19. 36 060 60 mesh filter 20. 250-20 Filter spring 21. 250-21 Gasket 22. 79-001/34 Mini swivel (optional)

AM-250-K. Gun repair kit. Comprising item numbers, 4,5,14,15,17,20 and 21

GM 250 MANUAL AIRLESS SPRAY GUN• 250bar MWP

• Painting contractor airless gun


• Comfortable gun handle

• In handle filter

• Swivel fluid inlet1/4 NPSM

• Repair kits, easy service.

• Robust trigger guard

• Weight 580gm approx incl tip and guard

GM 250 models.GM-250Professional painting contractor gun. Manual 250 barairless spray gun fitted 1/4 NPSM swivel fluid inlet7/8in x 14 fluid outlet Includes a guard and reversibletip. (specify tip size)

Spare parts for GM250 spray guns

item part number number description1. RAT200101 Needle assemby kit 2. RAT-5-2 Tip guard3. RAT420351 Two finger trigger 4. RAT420359 Fluid housing gasket 5 RAT420357 Swivel assembly6.A RAT329154 Gun filter 60 mesh6.B RAT329155 Gun filter 100 mesh7. RAT420360 End cap*8. RAT420363 Actuator pin set*9. RAT420364 Set screw*10. RAT420356 Trigger guard11 RAT-5(XXX) Reversible tip12 RAT-5-PK Pack of 5 tip seals

* Not shown on the drawing

Interchageability,Item 1 Interchanges with Graco

®218-070

Item 6A Interchanges with Graco®

287-032Item 6B Interchanges with Graco

®287-033

GM 250 Spray gun illustrated,fitted with a‘Speedy’guard, andreversible tip.

Airless spray guns

10

106

section nine


SP90 MANUAL AIRLESS SPRAY GUN 500BAR• 500bar MWP


• Gun handle filter (included)

• CE marked

• Swivel fluid inlet 1/4 NPSM(M)

• Alternative fluid inlets 1/4in BSP M16.

SP90 illustrated with optional Speedyreversible base unit and tip.

SP90 Model90-500/00 (11/16 x 16) SP90 manual spray gun 500bar rated 1/4 NPSM(M)fluid connection. Complete with flat tip guard (tipnot not included).

Spare parts for SP90 spray guns

item part number number description1 90-401 Guard and nut assembly4 90-404/2 Fluid tip diffuser 7/8 x 144 90-404/7 Fluid tip diffuser 11/16 x 165 90-405 Guard6 90-406 Needle7 90-407 Needle packing seal8 90-408 Pressure washer9 90-409 Needle packing screw10 90-410 Cylinder11 90-411 Locking nut12 90-412 Gun spring13 90-413 Spring cap14 90-414 Handle gasket

15 90-415 Handle17 90-417 Filter spring18 90-418 Gasket19 90-419 Swivel 1/4 NPS20 90-420 Swivel M16 x 1.521 90-421 Swivel 1/4 BSP22 90-422 Trigger assembly23 90-423 Trigger lock assembly24 90-424 Trigger pin and nut

90-430 Needle repair kit 90-406/408/409/411

90-300 Repair kit includes90-430 and 90-404/7

SP91 MANUAL LIGHTWEIGHTAIRLESS SPRAY GUN• 350bar MWP


• Ultra lightweight (425gm)

• CE marked

• Swivel fluid inlet

• Trigger guard

• 1/4 BSP fluid inlet connection

SP91 Models91-700SP91 manual spray gun 350bar rated. 1/4 BSP malefluid connection. Including base unit and tip (specifytip size)

Spare parts for SP91 spray gunsitem part number number description3 91-703 Trigger guard5 91-705 Fluid tip diffuser M18 x 1.55-1 91-705-1 O ring6 91-706 Needle7 91-707 End cap8 91-708 Pusher10 91-710 Packing retainer11 91-711 Packing case13 91-713 Trigger assembly14 91-714 Spring15 91-715 Pusher pin (x2)16 91-716 U packing17 91-717 Swivel connection 1/4 BSP18 91-718 Trigger pin19 91-719 HexCap nut (x2)20 91-720 Set screw21 91-721 O ring22 91-722 Back up ring T223 91-723 Spanner

Diffuser thread M18 x 1.5 accepts 88-556 Speedy 5and alternative 88-546 adaptor M18 x 1.5 to 7/8 x 14to accept Speedy 5 88-552.

SP91 illustrated with a Speedy 5 base unit and tip

Airless spray guns

item part number number description


section nine

109

Air assisted airless spray guns

AAG-2000illustrated withTRIA system

TRIA AIR ASSISTED AIRLESSMANUAL SPRAY GUN• Reversible tip design

• 140bar MWP

• CE marked

• Disc tip filter built into fluid tube

• 1/4 BSP air inlet connection

TRI-A Spray Gun Models83-001TRIA AAA gun 140bar MWP (2000psi). Colour blue.(air cap & tip extra)

Spare parts for TRIA manual spray guns

item part number number description1 83-401 Aircap retaining ring2 83-402 Friction ring (PTFE)3 83-010 TRIA air cap base4 83-015 TRIA ball tip (state size)5 83-011 TRIA swivelling seal assembly6 83-403 Air cap separation gasket7 83-404 Needle seatt8 83-405 Body / nozzle holder9 83-409 Head cone gasket12 83-407 Needle packing set (complete)13 83-408 Packing nut14 83-406 PTFE packing17 83-410 Trigger pin screw18 83-411 Fluid needle (complete)21 83-412 Fan control adjuster (complete)23 83-413 O ring (green Viton)25 83-414 Fluid needle spring26 83-415 Base for fluid needle spring27 83-416 Fluid control adjusting valve

item part number number description28 83-417 Air valve plug29 83-418 Air valve spring31 83-420 Air valve opening bar32 83-421 O ring (green Viton)33 83-422 Air valve body34-37 83-433 Air/needle valve needle

packing kit39 83-437 Trigger lock lever and screw43 83-439 Air inlet connection 1/4BSP male44 83-440 Air control valve (complete)45 83-441 Trigger47 83-442 Filter housing (without filter) NPS48 36-005-K10 Disc tip filter (pack 10)

83-445 Seals & springs kit (pos.2,6,9,12,23, 25, 29, 30, 32, 34, 35, 36)

183-510 Dismantling wrench

83-001 TRIA illustrated withreversible aircap & tip.

item part number number description1 63-560/15 Standard tip 2 96-402 Standard aircap 3 96-418 Fan regulator 4 96-401 Aircap ring standard 4A 96-401A Aircap ring TRIA 5 96-404 Joint 6 96-405 Air diffuser 7 96-406 Needle seat 8 96-408 Joint 9 96-407 Needle assembly 12 96-422 Packing nut

item part number number description13 96-423 Packing 14 96-421 Air valve 15 96-420 Air valve spring 16 96-419 Valve cap 17 96-430 Filter housing assy 20 96-426 Fluid tube assy. 21 96-428 Trigger 22 96-427 Trigger pin assy 25 96-410 Valve rod head 26 96-411 Air valve rod 27 96-432 Air inlet nipple 28 96-433 Joint

AAG-2000 MANUAL AIRASSISTED AIRLESS SPRAY GUN•240 bar MWP

• Accepts TRIA reversible kit


• Fluid inlet filter included

• CE marked

• 1/4 BSP air & fluid connection

AAG-2000 manual air assisted airless spray gun240bar MWP 1/4 BSP male air & fluid connection,complete with disc tip housing & screen (excl spraytip) supplied with standard air cap - order TRIAsystem separately if required.

Spare parts for AAG-2000 spray guns

110

section nine


AP20 AUTOMATIC AIRLESSSPRAY GUN 250 BAR MWP • Compact design (107 x 39 x 65mm)

• 316 stainless steel (wetted)

• 250bar MWP (3,625psi)

• 1/4 BSP(F) fluid inlets

• CE marked

The AP-20 automatic airless spray gun is made from316 stainless steel, wetted. Designed for continuoususe on automatic stations up to 250bar MWP.

AP20 Models20-500AP-20 automatic airless spray gun 250bar rated.Single 1/4 NPS male fluid connection20-550AP-20 automatic airless spray gun 250bar rated.2 x 1/4 NPS male fluid connections for recirculation

Spare parts for AP20 spray guns

AP-20 Stainless steel automatic airless spray gunillustrated with standard flat tip (not included)

item part item part number number description1 92-001 Nozzle 63-5052 21-008-K5 Nozzle Packing3 92-003 Needle seat4 92-004 Nozzle nut5 92-005 Gun body6 92-006 Washer7 92-007 Oil seal8 92-008 Cap nut

Automatic airless and AAA spray guns

9 92-009 Packing screwitem part number number description10 92-010 Needle assembly11 92-011 Piston disc12 92-012 Nut M513 92-013 Spring14 92-014 O ring15 92-015 Needle packing set16 92-016 Air sealDiffuser thread M18 x 1 accepts 88-555 Speedy V or88-455 Speedy IV

TRIA AUTO SPRAY GUN• 140bar MWP (2000psi)

• accepts TRIA reversible kit

• 1/4 BSP fluid connection

• CE marked 83-600

Automatic TRIA aitless spray gun 140bar MWP(2000psi). Includes a mounting base with air andfluid fittings and connections. Compact and durable.Teflon packings and stainless steel fluid passages.Accepts TRIA 83-005 reversible nozzle system (notincluded as standard) The TRIA air assisted airlessspray gun in association with the TRIA reversablespray tip system is suitable for use in demandingindustrial applications. The features of the gun andair cap/nozzle combination provide many benefits tothe user; reduced down-time due to reversiblecleaning nozzles and ease of servicing, superbatomisation and fan control. TwinTips also availablegiving 2 angles back-to-back from 1 tip key.

Spare parts for TRIA auto

item part number number description1 83-401 Air cap ring 2 83-602/k Needle nozzle kit. 3 83-603/k Spray head assembly 3a 83-603a Screw set m4 x 4 *3b 83-603b Packings*.4 83-604/k Needle packing kit 5 83-605/k Air valve kit 6 83-606 Gun body. 6a 83-606a Screw set m6 x 6*7 83-607 Fluid inlet block 8 83-608 Blow by pivot assy 9 83-609 Air flow control 10 83-610 Command block 10a 83-610a Packing seals*11 83-611 Piston assembly 11a 83-611a Piston seal *

item part number number description11b 83-611b O ring *12 83-612 Piston return spring *13 83-613 Piston cylinder 14 83-614 Needle spring.*15 83-615 Needle control knob 16 83-616 Gun Mount. 17 83-817 Box wrench CH10 19 83-010 Tria Aircap base 20 83-015 Tria ball tip21 83-011 Swivelling seal 22 83-403 Air cap separation

gasket* 25547r 83-620 Repair kit including:-

items at 3a, 3b, 6a, 10a, 11a, 11b, 12, 14. 22.

*kit no 83-620

112

section nine

113

Automatic airless and AAA spray gunsAP81 AUTOMATIC AIRLESSSPRAY GUN 250 BAR MWP The AP81 automatic airless spray gun is designedfor continuous use on automatic stations with highpressure airless spraying pumps and feature adiffuser tip, pneumatic operation, a flat tip guard asstandard.

• 250bar MWP

• CE marked

AP81 Models81-500AP81 automatic airless spray gun 250bar rated.Single 1/4 NPS male fluid connection incl Speedyand tip81-510AP81 gun only complete with flat tip guard. Tip notincluded.

Spare Parts for AP81 spray guns

item part number number description1 81-401 Guard and nut3 81-404 Fluid tip diffuser4 81-405 Needle18 81-406 Gasket17 81-407 Nipple19 81-408 Locking screw20 81-409 Push in fitting6 81-411 Pressure washer7 81-412 Needle packing seal8 81-413 Packing screw9 81-414 ‘O’ ring

item part number number description10 81-415 Lip seal11 81-416 Piston12 81-417 O ring13 81-418 Lip seal14 81-419 Lock nut15 81-420 Gun spring16 81-421 Cylinder screw cap21 81-421/A RingDiffuser thread 11/16 UNF - accepts 88-557 SpeedyV or 88-457 Speedy IV

AP25 AUTOMATIC AIRLESSSPRAY GUN 400 BAR MWP

Modern compact automatic airless spray gun.Designed for multiple mounting, and rapid cycling forarduous industrial duty. Stainless steel wetted fluidsection with an aluminium body for reduced weight.Designed for 400bar MWP.• CE marked

AP 25 models25-540Double piston model for 400bar MWP. Spray headfeatures 2 x 1/4 BSP(F) inlets.

Outlet nipples can be supplied if required; partnumbers 74-001/30 stainless steel 1/4 x 1/4BSP(M).74-011/30 stainless steel 1/4 x 1/4 NPSM(M). Pricesgiven on page number 39.Dimensions130mm x 40mm x 40mm. Air and fluid connectionsexcluded. Approximate weight 600gm

Spare Parts for AP25 spray guns

item part number number description1 92-004 Retaining nut 3 21-008-K5 Tip gasket pack of 54 93-003 Needle seat 5 92-014 O ring 6 25-006 Gun head stainless7 25-007 Packing cap 8 25-008 Needle packing 9 25-009 Packing screw 11 25-011 Packing12 25-012 Seals set (4)

13 25-013 Air seal 14 25-014 Circlip 15 25-015 Piston disc number 116 25-016 O ring 17 25-017 Needle 18 25-018 O ring 19 25-019 Disc housing 2 20 25-020 Piston seal (1) 21 25-021 Piston disc number 2 22 25-022 Nut M6 x 1 (2)23 25-400 Spring 400bar24 25-024 Spring cap25 25-025 Screw M5 x 65 (4)26 25-026 Lock nut27 25-027 Adjusting screw28 25-028 Cover

Gun repair kits25-029 Needle/Seat repair kit

Includes items:- 4,5,7,8,9,12,13,15,16,17.19

25-030 Gun service kit. Includes items:-5,7,8,9,11,12,13,15,17,19K,27

25-540 Automatic spray gun illustratedwithout spray tip


114

section nine


Airless and AAA spray guns price listorder ref description r.r.p order ref description r.r.p order ref description r.r.p order ref description r.r.p

AM250 manual spray gunAM-250-G Airless gun 250 bar complete with

base unit, excludes spray tip £139.50

AM-250-W Airless gun 250bar complete withbase unit, excludes spray tip £139.50

36-202 Retaining nut 7/8x14 £8.50

36-207 Retaining nut 11/16x16 £8.50

21-008/K5 Tip gasket £6.00

92-003 Needle seat £51.80

92-014 O ring £2.30

250-002 Fluid adaptor 7/8x14 £8.50

250-007 Fluid adaptor 11/16x16 £8.50

250-07 Trigger Guard £14.90

250-08 Trigger assembly £16.50

250-09 Sealing washer £1.30

250-10 M3 nut £1.10

250-11 Trigger pin £3.15

250-13 Push pin (2) pair £1.50

250-14 Needle assembly £51.80

250-15 Spring £4.85

250-16 Closure cap £7.95

250-17 Handle seal £2.96

250-18 Handle only £49.26

36-060 60 mesh filter Pack 10 £22.80

250-20 Filter spring £2.18

250-21 Gasket £1.85

79-001/34 Micro swivel each £32.60

GM250 250bar contractor spray gunGM250 Painting contractor gun including

base and tip £169.50

RAT200101 Needle assembly kit £51.20

RAT-5-2 Tip guard £16.80

RAT420351 Two finger trigger £10.60

RAT420359 Fluid housing gasket £9.50

RAT420357 Swivel assembly £34.10

RAT329154 Gun filter 60 mesh packet of 2 £5.75

RAT329155 Gun filter 100 mesh packet of 2 £5.75

RAT420360 End cap £9.50

RAT420363 Actuator pin set £9.50

RAT420364 Set screw £3.98

RAT420356 Trigger guard £20.00

RAT-5-K Tip seals pack of 5 £14.00

SP90 500bar manual spray gun90-500/00 Spray gun 1/4 NPSM (M) complete with

flat tip guard, excludes spray tip £225.00

90-401 Guard/nut for flat tip £9.95

90-404/2 Fluid tip diffuser 7/8x14 £39.95

90-404/7 Fluid tip diffuser 11/16x16 £39.95

90-405 Trigger guard £31.95

90-406 Needle £38.60

90-407 Needle packing seal £4.64

90-408 Pressure washer £4.64

90-409 Needle packing screw £7.15

90-410 Cylinder £17.56

90-411 Locking nut £2.08

90-412 Gun spring £3.50

90-413 Spring cap £14.52

90-414 Handle gasket £2.96

90-415 Handle £49.30

90-417 Filter spring £2.18

90-418 Gasket £1.85

90-419 Swivel 1/4 NPSM £35.30

90-420 Swivel M16x1.5 £40.30

90-421 Swivel 1/4 BSP £35.30


90-423 Trigger lock assembly £4.60

90-424 Trigger pin and nuts £5.50

Repair kits90-430 Needle repair kit £49.00

90-300 Repair kit £76.00

SP91 Manual lightweight 345bar spray gun91-700 Manual spray gun complete with

flat tip guard excludes spray tip £455.00

91-703 Trigger guard £17.74

91-705 Fluid tip diffuser 11/16x16 £82.25

91-705-1 O ring £2.95

91-706 Needle £49.95

91-707 End cap £14.15

91-708 Pusher £21.25

91-710 Packing retainer £7.80

91-711 Packing casing £18.10


91-714 Spring £4.50

91-715 Pusher pins (2) pair £7.70

91-716 U packing £38.00

91-717 Swivel connection £58.80

91-718 Trigger pin £6.80

91-719 Dome nuts (2) pair £2.10

91-720 Set screw £2.25

91-721 O ring £1.75

91-722 Backing ring £5.50

91-723 Spanner £11.10

AAG-2000 Manual AAA 250bar spray gunAAG-2000 Manual AAA spray gun

excludes spray tip £497.00

63-560/15 Standard tip £48.50

96-402 Standard aircap £84.75.

96-418 Fan regulator £52.25

96-401 Aircap ring standard £38.30

96-401A Aircap ring TRIA £38.30

96-404 Joint £8.87

96-405 Air diffuser £26.80


96-408 Joint £3.40


96-422 Packing nut £8.40

96-423 Packing £7.50

96-421 Air valve £5.45

196-420 Air valve spring £3.40

96-419 Valve cap £16.65

96-430 Filter housing assy £22.62

96-426 Fluid tube assy. £57.60

96-428 Trigger £13.20

96-427 Trigger pin assy £3.00

96-410 Valve rod head £8.69

96-411 Air valve rod £7.15

96-432 Air inlet nipple £7.15

96-433 Joint £3.55

TRIA Manual AAA 140 bar spray gun83-001 Manual AAA spray gun

excludes TRIA air cap and tip £495.00

83-401 Aircap retaining ring £36.18

83-402 Friction ring £3.30

83-010 Aircap base £87.50

83-011 Swivel seal £10.56

83-013 Ball tip and seal (state size) £55.50

83-015 Ball tip only (state size) £46.50

83-403 Air separation gasket £5.00


83-405 Body/nozzle holder £53.00

83-406 PTFE packing £3.00

83-407 Needle packing set £44.15

83-408 Packing nut £1.95

83-409 Head cone gasket £2.75

83-410 Trigger pin screw £1.00

83-411 Fluid needle £65.20

83-412 Fan control adjuster £17.60

83-413 O ring £2.75

83-414 Needle spring £2.40

83-415 Spring base £2.20

83-416 Fluid control adjuster £18.00

83-417 Air valve plug £5.30

83-418 Air valve spring £2.10

83-420 Air valve opening bar £3.80

83-421 O ring £2.10

83-422 Air valve body £8.10

83-433 Air needle valve packing £2.10

83-434 Flat washer £1.00

83-435 Air valve packing spring £2.00

83-436 Air valve packing nut £1.50

83-437 Trigger lock lever/screw £5.95

83-439 Air inlet connection £5.50

83-440 Air control valve £13.95

83-441 Trigger £19.95

83-442 Filter housing only £43.30

24097-R/K10 Cleaning brush pack of 10 £35.00

83-445 Seals and spring kit £20.00

183-510 Wrench £ 14.00

AP20 Automatic airless 250bar spray gun20-500 Auto gun 1 x 1/4 BSP(M) outlet

excludes spray tip £480.00

20-550 Auto gun 2 x 1/4 BSP(M) outletsexcludes spray tip £485.00

63-505 Flat tip to choice £25.00

21-008-K5 Tip gaskets £6.00

92-003 Needle Seat £51.80

92-004 Nozzle retaining nut £8.50

92-006 Washer £0.50

92-007 Oil seal £8.85

section ten

117

Suction feed equipment and hoses

PTFE suction hose page 118assemblies.

Rubber and thermoplastic page 119suction hose assemblies.

Suction systems 25 litres page 120

Suction systems 205 litres page 121

Gravity bucket page 121

Suction hose in bulk page 123

Price list page 124



Suction systems are generally easy to replace with items from the Exitflex

range of stainless steel suction tubes and suction hose assemblies. The

availability is usually from stock. Specials can be provided if a suitable

standard set of components cannot be found. This programme was

developed originally following requests from dealers. The range provides a

set of easy to obtain parts at attractive prices to be used as alternatives to

sometimes costly OEM replacements.

116

92-008 Cap nut £12.95

92-009 Packing screw £2.30


92-011 Piston disc £12.00

92-012 Nut M5 £1.40

92-013 Spring £5.20

92-014 O ring £2.30


92-016 Air seal £4.15

TRIA Automatic AAA 140bar spray gun83-600 Automatic AAA spray gun £505.00

83-401 Air cap ring £36.18

83-602/k Needle nozzle kit. £104.90

83-603/k Spray head assembly not sold

83-603a Screw set M4 x 4 (kit no 83-620) Kit only

83-603b Packings (kit no 83-620) Kit only

83-604/k Needle packing kit £39.50

83-605/k Air valve kit £34.50

83-606 Gun body not sold

83-606a Screw set M6 x 6 (kit no 83-620) Kit only

83-607 Fluid inlet block £65.75

83-608 Blow by pivot assy £17.25

83-609 Air flow control £22.75

83-610 Command block not sold

83-610a Packing seals (kit no 83-620) Kit only

83-611 Piston assembly £27.85

83-611a Piston seal (kit no 83-602) Kit only

83-611b O ring (kit no 83-620) Kit only

83-612 Piston return spring (kit no 83-620) £8.60

83-613 Piston cylinder £42.00

83-614 Needle spring. (kit no 83-620) £6.65

83-615 Needle control knob £39.50

83-616 Gun mount £54.00

83-817 Box wrench CH10 £14.00

83-010 Tria aircap base £87.50

83-015 Tria ball tip £46.50

83-011 Swivelling seal £10.56

83-403 Air cap separation gasket (kit no 83-620) 25547r £5.00

83-620 Repair kit including:-items at 3a, 3b, 6a, 10a, 11a,11b, 12, 14. 22 £60.00

AP25 Automatic airless 400bar spray gun25-540 Automatic airless gun £495.00

92-004 Retaining nut £8.50

21-008-K5 Tip gaskets (5) £6.00


92-014 O ring £2.30

25-006 Gun head £36.00

25-007 Packing cap £2.50

25-008 Needle packing £6.60


25-011 Packing £4.00

25-012 Seals set of 4 £8.00

25-013 Air seal £13.95

25-014 Circlip £3.00

25-015 Piston disc 1 £13.95

25-016 O ring £2.00

26-017 Fluid needle £56.00

25-018 O ring £2.50

25-019 Disc housing not sold

25-020 Piston seal £2.00

25-021 Piston disc 2 £13.95

25-022 Nut M6 £1.40

25-400 Spring 400bar £5.60

25-024 Spring cap £87.95

25-025 Screw M5 x 65 £8.00

25-026 Lock nut £5.20

25-027 Adjusting screw £6.20

25-028 Cover £3.30

25-029 Needle/seat repair kit £115.80

25-030 Gun service kit £48.10

AP-81 Automatic airless 250bar spray gun81-500 Automatic airless spray gun £465.00

90-401 Guard and Nut £9.95

81.404/7 Fluid tip diffuser £39.95

81-405 Needle £39.35

81-406 Gasket £6.00

81-407 Nipple £8.00

81-408 Locking screw £4.85

81-409 Push in fitting £8.10

81-411 Pressure washer £3.75



81-414 O ring £4.50

81-415 Lip seal £34.00

81-416 Piston £20.50

81-417 O ring £5.64

81-418 Lip seal £38.04

81-419 Lock nut £1.75

81-420 Gun spring £5.70

81-421 Cylinder cap screw £52.00

81-421/a Locking ring £36.00

Airless and AAA spray guns price listorder ref description r.r.p order ref description r.r.p

www.exitflex.co.uk

118

section ten

119

Suction feed equipment and hoses


CONVOLUTED PTFE SUCTION HOSE ASSEMBLIES RUBBER AND THERMOPLASTIC SUCTION HOSE ASSEMBLIES

Notes to the PTFE assembly charts• Standard 1500mm assemblies are not fitted with

spring guards.• All standard assemblies feature carbon steel inserts

and ferrules • Fittings are straight unless otherwise noted • Alternate lengths, spring guards and stainless

ferrules can all be supplied as extras. Enquire for prices.

• Assemblies with carbon steel fittings are shown with the alternative of stainless fittings, these are indicated by / 30 suffix in the price list

• Prices are listed for carbon steel and stainless models in the price list.

• To order, select the thread combination required from the table, then, take the part number from thefirst column

Notes to the rubber and thermoplastic charts• Standard assemblies, not fitted with spring guards,

Lengths are indicated in mm.• All standard assemblies feature carbon steel

inserts and ferrules • Fittings are straight unless otherwise noted • Alternate lengths, spring guards and stainless

ferrules can all be supplied as extras. Enquire for prices.

• Prices are listed for carbon steel. Stainless modelshave a / 30 suffix in the price list..

• To order, select the thread combination required from the table, then, take the part number from thefirst column.

EF370-8-1500/BFM 2EF370-8-1500/BFF 1 1EF370-81500/BFF90F 1 1EF370-8-1500/BFNF 1 1EF370-8-1500/BFM26F 1 1EF370-8-1500/BFM36F 1 1 The drawings are a guide to the style of assemblies

available.The drawings are a guide to the style of assembliesavailable.

1/2

BS

P (F

)

1/2

BS

P (M

)

1/2

BS

P 9

0 (F

)

1/2

NP

SM

(F)

M36

(F)

M26

(F

)

EF 370Hose assemblyreferenceConductive hoseBore 1/2in

EF 370Hose assemblyreferenceConductive hoseBore 1in

EF370-12-1500/BFM 1 1EF370-12-1500/BFF 2EF370-12-1500/BFF90 1 1EF370-12-1500/BFNM 1 1EF370-12-1500/BFNF 1 1EF370-12-1500/BFM26F 1 1EF370-12-1500/BFM36F 1 1

3/4

BS

P(F

)

3/4

BS

P(M

)

3/4

BS

P(F

)90

3/4

NP

SM

(F)

3/4

NP

T(M

)

M26

(F)

M36

(F)

EF 370Hose assemblyreferenceConductive hoseBore 3/4in

SR1.16.1800.NMM 2SR1.16.2000.BFM 1 1SR1.16.2000.BFF 2SR1.16.2000.BFF90 1 1SR1.16.2000 BFNF90 1 1SR1.16.2000.BFM36F 1 1

1in

BS

PT(

M)

1in

BS

P(F

)1i

n B

SP

(F) 9

01i

n N

PS

(F)

1in

NP

T(M

)1i

n N

PS

M(F

)90

M 3

6x2(

F)

SR1.16Non conductive hose

Bore 1in

PF1.12.2000 NMM 2PF1.12.2000.BFM 1 1PF1.12.2000.BFF 2PF1.12 2000.BFF90 1 1PF1.12 2000 BFNF90 1 1PF1.12.2000.BFM36F 1 1PF1.12.2000.BFM26F 1 1

3/4

BS

PT(

M)

3/4

BS

P(F

)3/

4 B

SP

(F)9

03/

4 N

PS

M(F

)3/

4 N

PT(

M)

3/4

NP

SM

(F)9

0M

36x2

(F)

M26

x1.2

5(F)

PF1.12Conductive hose

Bore 3/4inStandard range

EF370-16-1500/BFM 1 1EF370-16-1500/BFF 2EF370-16-1500/BFF90 1 1EF370-16-1500/BFNM 1 1EF370-16-1500/BFNF 1 1EF370-16-1500/BFNF90 1 1EF370-16-1500/BFM36F 1 1

1inB

SP

(F)

1inB

SP

(M)

1inB

SP

(F)9

0

1inN

PS

M(F

)

1inN

PT(

M)

1inN

PS

M90

(F)

M36

(F)

LPC1.8Low pressureconductive hose

Bore 1/2in

LPC1.8.2000.BFF 2LPC1.8.2000.BFM 1 1LPC1.8.2000.BFF90 1 1LPC1.8.2000.BFNF 1 1LPC1.8.2000.NFNF90 1 1LPC1.8.2000.BFM36F 1 1LPC1.8.2000.BFM26F 1 1

1/2

BS

P(M

)1/

2 B

SP

(F)

1/2

BS

P(F

)90

1/2

NP

SM

(F)

1/2

NP

T(M

)1/

2 N

PS

(F)9

0M

36(F

)M

26x1

.25(

F)

Legend for part number codingB = BSP F = Female M = Male N = NPSM/NPT90 = Swept 90 degree bend M = Metric thread

Legend for part number codingB = BSP F = Female M = Male N = NPSM/ NPT90 = Swept 90 degree bend M = Metric thread

120

section ten


37-530 Straight inlet to pump, 3/4 BSP female connection. Black rubber suction hose, 19mm bore Stainless steel wand, carbon steel connection. Suitable for 25 litre container. Design to accept 36-453 filter (including screen tochoice) order extra.

37-531 90° inlet pump. Specification otherwise the same as 37-530 above

37-002/30As 37-001/30 but withfluted end where nofilter is required.

37-005/30Stainless steel 19mmdiameter Traditional 90°bend, equipped to accept filter assembly 36-453

37-004/30Stainless steel 16mmdiameter. Suitable forlight materials, smallpump or return hoses.No filter option

37-003/30Stainless steel 19mm diameterstraight for use with smaller pumps. Equipped to acceptfilter assembly 36-453

37-001/30Stainless steel 25mmdiameter, suitable for usewith larger pumps andheavy materials. Equippedto accept filter assembly36-450

37-540 Straight inlet to pump, 3/4 BSP female connection. Black rubber suction hose, 19mm bore Stainless steel wand carbon steel connection. Suitable for 205 litre container Designed to accept 36-453 filter (including screen tochoice) order extra.

37-541 90° inlet to pump, specification otherwise the same as 37-540

37-006/30 Stainless steel 19mmdiameter 90° bend 1/2 BSPmale, coned for hose andequipped to accept 36-453filter assembly (includingscreen to choice) Order extra

37-016/30Stainless steel 19mmdiameter 90° bend 3/4 BSPmale coned for hose andequipped to accept 36-452filter assembly (includingscreen to choice) Order extra

37-026/30Stainless steel 25mmdiameter 90° bend 1in BSPmale coned for hose andequipped to accept 36-450filter assembly (includingscreen to choice) Order extra

37-007/30Stainless steel 25mmdiameter to suit largercontainers up to 205 litre.Adjustable height withlocking collar. 1in BSP male connections2in BSP container thread.Equipped to accept 36-450filter assembly (includingscreen to choice) Orderextra.

Suction Wand Bung Mounting Suction Wand 205 Litre

Suction feed tubes and systemsSUCTION SYSTEMS 25 LITRE SUCTION SYSTEMS 205 LITRE

Designed particularly foruse with closed 205 litredrums and moisture curematerials.

37-530

37-540

122

section ten


SUCTION SYSTEMS SUCTION HOSES IN BULK

37-500Straight inlet pump Latex type, carbon steel tubes1in bore suction hose

37-501Suction tube assembly

37-502Return tube assembly

37-505System with 36-454 filter including screen to choice

37-51090º inlet to pump Latex type, carbon steel tubes1in bore suction hose



37-515System with 36-454 filter including screen to choice

37-520Straight inlet to pumpEnamel type, carbon steeltubes 1/2in bore suction hose



37-525System with 36-455 filter including screen

For use with electriucally driven diaphragm pumps Wagner pattern


GRAVITY BUCKET

52002Five litre black gravity bucket c/w lid. 1in BSP(F)outlet

78-090/30U pipe. Stainless steel M36(F) 1in BSP(M)

78-101/30U pipe. Stainless steel 1 BSP(F) x 1in BSP(M)

LPC. 1.8 Thermoplastic nylon lined hose with blackconductive PU cover. MWP 15bar ID 12.5mm OD 19mm30 metre coils

SR.1.12 3/4in bore. Black rubber with nylon tube. Suction and pressure use. Non conductive, double textile braid. MWP 34bar OD 28mmAvailable in bulk by the metre.

SR.1.16 1in bore. Black rubber, nylon tube, non conductive, doubletextile braid for suction and pressure use. MWP 34 barOD 38 mmAvailable in bulk by the metre

PF.1.8 1/2in bore Conductive suction hose. Black rubber, with textilebraid. Wire reinforcing coil for support andconductivity.OD approx 22mm 40 metre coils

PF.1.10 5/8in boreConductive suction hose. Black rubber, with textilebraid. Wire reinforcing coil for support andconductivity.OD approx 26mm40 metre coils.

PF.1.12 3/4in bore Conductive suction hose. Black rubber with textilebraid. Wire reinforcing coil for support andconductivity. OD approx 30mm 40 metre coils

PF.1.161in boreConductive.suction hose. Black rubberwith textile braid. Wire reinforcing coil for support andconductivity.OD approx 35mm 40 metre coils

In assembling conductive hoses care must betaken to ensure contact is made between theconductor and the hose ferrule to ensureconductivity.


section ten

125

Suction feed tubes and systems price listorder ref description r.r.p order ref description r.r.p order ref description r.r.p order ref description r.r.p

Convoluted PTFE suction hoses1500mm long

Carbon steel fittings 1/2in boreEF370-8-1500/BFM £52.68

EF370-8-1500/BFF £52.68

EF370-8-1500/BFF90 £52.68

EF370-8-1500/BFNF £50.36

EF370-8-1500/BFM26F £79.68

EF370-8-1500/BFM36F £79.68

Stainless steel fittings 1/2in boreEF370-8-1500/BFM/30 £84.22

EF370-8-1500/BFF/30 £85.16

EF370-8-1500/BFF90/30 £108.16

EF370-8-1500/BFNF/30 £84.82

EF370-8-1500/BFM26F/30 £106.64

EF370-8-1500/BFM36F/30 £106.64

Carbon steel fittings 3/4in boreEF370-12-1500/BFM £79.15

EF370-12-1500/BFF £79.15

EF370-12-1500/BFF90 £82.50

EF370-12-1500/BFNM £85.80

EF370-12-1500/BFNF £83.35

EF370-12-1500/BFM26F £109.00

Ef370-12-1500/BFM36F £109.00

Stainless steel fittings 3/4in boreEf370-12-1500/BFM/30 £173.48

EF370-12-1500/BFF/30 £176.40

EF370-12-1500/BFF90/30 £212.16

EF370-12-1500/BFNM/30 £183.48

EF370-12-1500/BFNF/30 £186.48

EF370-12-1500/BFM26F/30 £228.96

EF370-12-1500/BFM36F/30 £228.96

Carbon steel fittings 1 in boreEF370-16-1500/BFM £110.92

EF370-16-1500/BFF £110.52

EF370-16-1500/BFF90 £111.32

EF370-1-/1500/BFNM £115.92

EF370-16-1500/BFNF £115.52

EF370-16-1500/BFNF90 £114.97

EF370-16-1500/BFM36F £142.06

Stainless steel fittings 1in boreEF370-16-1500/BFM/30 £234.80

EF370-16-1500/BFF/30 £224.20

EF370-16-1500/BFF90/30 £274.28

EF370-16-1500/BFF90 £275.00

EF370-16-1500/BFNM/30 £244.80

EF370-16-1500/BFNF/30 £234.20

EF370-16-1500/BFNF90/30 £283.16

EF370-16-1500/BFM36F/30 £254.76

Rubber and thermoplastic suction hosesLength in mm

Carbon steel fittings 1/2in boreLPC1.8.2000.BFF £63.54

LPC1.8.2000.BFM £63.54

LPC1.8.2000.BFF90 £63.54

LPC1.8.2000.BFNF £61.05

LPC1.8.2000.NFNF90 £61.29

LPC1.8.2000.BFM36F £89.97

LPC1.8.2000.BFM26F £89.97

Stainless steel fittings 1/2in boreLPC1.8.2000.BFF/30 £95.68

LPC1.8.2000.BFM/30 £96.00

LPC1.8.2000.BFF90/30 £119.00

LPC1.8.2000.BFNF/30 £95.68

LPC1.8.2000.NFNF90/30 £121.40

LPC1.8.2000.BFM36F/30 £117.50

LPC1.8.2000.BFM26F/30 £117.50

Carbon steel fittings 3/4in borePF1.12.2000 NMM £70.00

PF1.12.2000.BFF £70.00

PF1.12.2000.BFM £72.15

PF1.12 2000.BFF90 £72.15

PF1.12 2000 BFNF90 £77.55

PF1.12.2000.BFM36F £103.25

PF1.12.2000.BFM26F £103.25

Stainless steel fittings 3/4in borePF1.12.2000 NMM/30 £137.30

PF1.12.2000.BFM/30 £134.90

PF1.12.2000.BFF/30 £132.50

PF1.12 2000.BFF90/30 £167.70

PF1.12 2000 BFNF90/30 £162.15

PF1.12.2000.BFM36F/30 £180.95

PF1.12.2000.BFM26F/30 £180.95

Carbon steel fittings 1 in boreSR1.16.1800.NMM £95.00

SR1.16.2000.BFM £99.80

SR1.16.2000.BFF £101.00

SR1.16.2000.BFF90 £101.85

SR1.16.2000 BFNF90 £108.50

SR1.16.2000.BFM36F £132.60

Stainless steel fittings 1in bore SR1.16.1800.NMM/30 £194.25

SR1.16.2000.BFM/30 £185.42

SR1.16.2000.BFF/30 £176.60

SR1.16.2000.BFF90/30 £218.20

SR1.16.2000 BFNF90/30 £225.60

SR1.16.2000.BFM36F/30 £200.00


for 25 litre drums 37-530/30 Industrial suction system £96.00

37-531/30 Industrial suction system +90º £96.00

37-001/30 1in bore SS suction tube. £65.00

37-002/30 1in bore SS suction tube £65.00

37-003/30 1/2in bore SS suction tube. £60.00

37-004/30 3/8in male SS suction tube. £48.00

37-005/30 1/2in SS 90 bend suction tube £60.00

for 200 litre drums stainless steel37-540 Industrial suction system £160.00

37-541 Industrial suction system + 90º £160.00

37-007/30 Bung mounting tube designed for moisture cure adhesive and similar £160.00

37-006/30 19mm dia 1/2 BSP tube £ 75.00

37-016/30 19mm dia 3/4 BSP tube £85.00

37-026/30 25mm dia 1in BSP tube £90.00

Contractor suction systemsand sub assemblies37-500 Latex suction set. £75.00

37-501 Suction assembly only £ 50.00

37-502. Return assembly only. £25.00

37-503 As 37-500 c/w basket filter £95.00

37-510 Latex suction set.90 degree £115.00

37-511 Suction assembly only £85.00

37-512 Return assembly only. £30.00

37-515 As 37-510 plus filter £105.00

37-520 Enamel suction set. £77.00

37-521 Suction assembly only. £52.00

37-502 Return assembly only. £25.00

37-525 As 37-520 plus filter. £84.00

Gravity bucket assembly and stainless steel connecting pipes52002 5 litre black nylon bucket

1in BSP(F) outlet £86.95

78-090/30 U connecting pipe M36(F) 1in BSP(M) £99.50

78-101/30 U connecting pipe 1in BSP(M) 1in BSP(F) £99.50

Suction hoses, bulk supplyLPC.1.8 1/2in bore conductive £10.42

thermoplastic hose

SR.1.12 3/4in bore rubber hose £24.40nylon lined. Non conductive

SR.1.16. 1in bore rubber hose. £29.24nylon lined. Non conductive.

PF.1.8 Conductive 1/2in bore rubber £18.00

PF 1.10 Conductive 5/8in bore. rubber £19.95

PF.1.12 Conductive 3/4in bore. rubber. £22.40

PF.1.16 Conductive 1in bore. rubber. £24.90

Suction Filters

Bell type311 000 Bell Kit M15 x1(F) £16.36

312 000 Bell Kit 1/2in BSP(F) £16.36

314 000 Cap M15x 1 (F) £7.68

315 000 Cap 1/2in BSP (F) £7.68

306 055 Disc screen 30mesh £6.30

306105 Disc screen 50mesh £6.30

313 000 Spring £3.92

Barrel type316 000 Filter assy. 30 mesh £17.88

317 000 Filter assy. 60 mesh £17.88



320 000 Adaptor M28 to M15 £6.30

321 000 Adaptor M28 to 3/8 BSP £6.62

322 000 Adaptor M28 to 1/2BSP £10.26

323 000 AdaptorM28 to 3/4 BSP £10.24

324 000 Adaptor M28 to 1inBSP £13.90


36 Series/450

Larger Capacity Suction filter assys36-450/42 Green 1in BSP(F) £40.18

36-452/42 Orange 3/4 BSP(F) £40.18

36-453/42 Black 1/2 BSP(F) £40.18

36-454/42 Blue M28 x 1.5(F) £40.18

36-455/42 Red M15x1 (F) £40.18

36-456/42 Yellow 1in push on £40.18

36-420 Cap Seal £6.34

36-400 series Screen included, specify mesh size

37-526 Latex Basket filter M28F £20.00

36 Series/029

Stainless steel suction filter.36-029/01/** 30 mesh £18.00

36-029/02/** 60 mesh £22.00

Rat catchersRAT319152 3/4inUNF coarse Nylon boss.

(replaces 235004) £8.00

RAT329153. 7/8inUNF coarse Nylon boss.(replaces 276-385 ) £6.20

RAT329122. 1in UNF coarse stainless steel (replaces 183-770) £6.50

** Add thread detail to part number.

eg 36-029/01/3/4in

Choose from sizes available:-

1in, 3/4in,1/2in,3/8in, M28 or M15

order ref description r.r.p

Suction feed tubes and systems price list section eleven

127

Colour change equipment

Time is of the essence on busy production lines. Colour changing can be

messy and time consuming. Where you have a system that needs colours,

on demand, a colour changing system is the better solution. Often the

colour is selected at the computer controlling the production process, this

means speed, then, reliability is a must. The systems provided by Exitflex

are meeting that demand in installations today. Could your production

benefit from an automated colour changing system?

Colour Changing equipment for Airless and Air Assisted Airless spray systems. page 128

Modular colour change system page 129

Colour valve page 129

Compact colour change page 130system for 250bar

Low pressure colour changevalve for 20bar duty page 131

Pneumatic control paneloptions page 131

Alternative manifold arrangements page 131

Price list page 132



section eleven

129128

Colour change equipment


COLOUR CHANGING SYSTEMSFOR AIRLESS AND AIR ASSISTEDAIRLESS SPRAY SYSTEMS

Need to frequently change colour ?

Wasting too much production time ?

Yes ?

Then install a modular colour changingsystem from Exitflex

• Easy to operate and service

• Use with manual or automatic systems

• Modular, add colours when needed

• Stainless steel wetted

• Control with computer or pneumatic systems

Colour Valve D Type D99135300 170bar MWP

D99135300SComplete standard valve

D99135300CComlete catalyst valve (double seal)

Colour Valve Spare Partsitem part number qty. number description1c 1 991.354.21 Piston1d 1 205.092.00 O Ring.1e 2 110.841.00 Screw1f 1 991.354.31 Spacer standard valve 6.6mm

Further systems by enquiry

item part number qty number description1f 2 991.354.31.m Spacer catalyst valve 1.95mm1h 1 991.352.15 O Ring1i 1 991.352.05 Seat (Polyethylene)1i 1 78-121 Delrin seat + O rings1i 1 92-014 O ring viton1k 1 991.354.11 Cylinder1l 1 991.352.M4 Nut.1m 1 40.10.15.06 O Ring1n 1 110.800.10 O Ring1p 1 991.356.05 Spring seal standard valve1p 2 991.356.05 Spring seal catalyst valve1q 1 991.352.10 Needle

The Exitflex system comprises a modular buildmanifold , arranged vertically to accept 170 bar MWPvalves mounted staggered, horizontally..

The colour is supplied to the valve inlet andcontrolled there, it leaves the valve down themanifold column to exit at the bottom.

Sequencing the system can be manual or computercontrolled. Stop the colour in use, flush, close flushvalve , open next colour. The valves are opened andclosed by the double acting pneumatically driven,piston.

Solvent is used efficiently and reduces waste andpollution.

When calculating how many valves are required foryour needs, remember you need 1 flushing valve plusthe number of regularly needed colours your systemuses. Refer to the chart following as an example.

There is a choice of system pressures available from170bar, 250bar and low pressure for conventional orHVLP spray systems.

For clarification or help please call our technical staffwho will be pleased to assist.

Number of Solvent flush Total Valvescolours valve

2 1 33 1 44 1 55 1 66 1 77 1 88 1 9

item part number number description2 78-025 End Block3 78-026 Colour Change Block4 78-027 Spacer5 78-028/2 Rod 2 block set of 4 rods M8

78-028/3 Rod 3 block set of 4 rods M878-028/4 Rod 4 block set of 4 rods M878-028/5 Rod 5 block set of 4 rods M8

78-028/6 Rod 6 block set of 4 rods M878-028/7 Rod 7 block set of 4 rods M878-028/8 Rod 8 block set of 4 rods M878-028/9 Rod 9 block set of 4 rods M878-028/10 Rod 10 block set of 4 rods M8

6 248-4422 Dome Nut M8

item part number number description7 530-797 Washer 8 0116-24V Viton O Ring 9 293-369-50 Bolt M5X50

293-369-60 Bolt M5X6010 0140.10V Viton O Ring11 0160-10V Viton O Ring12 PO2 BP6 Plug 3/8 BSP STS13 74-002/30 Adaptor 3/8 x 1/4 BSP14 BS 38 Bonded Seal15 530.832 Split Washer 5mm16 174-811/30 Adaptor 1/8 x 1/4 BSP17 174-801/31 Washer (copper)

Modular Colour ChangeSystem 170bar MWP

section eleven

131130

Colour change equipment 250BAR COMPACT COLOURCHANGE SYSTEM

The Compact ECCV-250 colour change design fromExitflex allows for even shorter fluid passages forflushing. This means faster clean and less solventused per colour change.Two valves can mount facing thus saving height ofthe assembly. The system MWP is 250bar which isideal for airless and AAA applications. All stainlesssteel wetted. Each valve is cycled by a double actingpiston which requires appropriate dual operatingpneumatic supply valves. Frequently the systemdesigner chooses the systems which can becomputer or pneumatically sequenced.

Compact System Parts - Manifold 250bar

Colour Valve ECCV-250 part number description per valveM4 x 12 Cap screw. 4 ECCV-C12. Cylinder boss. 1 0300-10 O ring 1 0220-40 O ring 1ECCV-C13 Piston 1 M4 x 0.7 Nut washer 1 ECCV-C11 Cylinder 1CCV-1112-2 Spring 1401.015.06 O ring 1991.354.31. Spacer Std. 1991.354.31m Spacer Cat 2 991-356-05 Seal 1 ECCV-C35 Spindle 1 78-121/20 Delrin seat 1 ECCV-15 Spindle head 1

The LPCV colour change valve is suitable forconventional and HVLP manual and automatic spraysystems, 20bar MWP..Like the compact units they can be built up inmultiples of two valves per manifold block.This 20bar valve features a cast stainless steel bodywith a double acting piston to control open and closefunction. This is generally controlled by the computermanagement system for the finishing line. .A manual pneumatic selection option can beemployed where a fully automated system is notrequired.Compact and easy to service, these valves are wellproven and reliable.

Consider whether you could save time and materialby using a colour change system on your productionline? Why not call us to discuss your ideas, we willbe pleased to help whenever we can.

part number description per manifoldECCV-C41 End block 2ECCV-C40 Dual port block 1 per 2 colours 78-027 Spacer. 2 per block74-311/30 Plug. 174-001/30 Adaptor 1/4BSP 1BS 38 Bonded seal 20116-24V Viton O ring 1 per spacerM5 x 11 Cap head screw 4 per valve.0160-10 Viton O ring 1 per valve78-028/2 2 block set 4 rods 78-028/3 3 block set 4 rods 78-028/4 4 block set 4 rods 78-028/5 5 block set 4 rods 78-028/6 6 block set 4 rods 248-4422 Dome nut St/St 8 per manifold530-797 Washer 8 per manifold

Colour change equipment PNEUMATIC CONTROL PANELWhen required we can supply a pneumatic controlpanel to operate with the colour change modulesEach panel comprises a case of suitable minimumdimensions housing a rotary colour selection valve,solvent/off/colour switch and double actingpneumatic valves to provide fast acting variablecontrol of the colour valves.

Typical lead time 4 to 6 weeks from date of order.

ALTERNATIVE MANIFOLDARRANGEMENTSIllustrated are two alternative systems that can bequoted on request.


LOW PRESSURE COLOUR CHANGEVALVE 20BAR

132

section eleven


Colour change equipment price listColour changing systemsAll system prices will be quoted against thespecification requested.

170bar modular system comprises:-

One colour valve per block. A system may feature up to 12

valves, ie 11 colour 1 solvent.

250bar compact system comprises:-

Two colour valves per block. A system may

feature up to 12 valves. ie 11 colours and 1 solvent.

20bar compact low pressure system comprises :-

Two colour valves per block. A system may

feature up to 12 valves. ie 11 colours and 1 solvent.

170bar modular systemColour valves D type

D.99135300S Standard colour valve £435.00

D99135300C Catalyst valve £475.00

Colour valve D type spares

1c 991.354.21 Piston £18.75

1d 205.092.00 O ring £20.10

1e 110.841.00 Screw (2) £3.98

1f 991.354.31 Std spacer 6.5mm £23.06

1f 991.354.31m Cat spacer 1,95mm(2) £22.00

1h 991.352.15 O ring £4.55

1i 991.352.05 Seat green £14.25

1i 78-121 Seat Delrin + O rings £30.70

1j 92-014 O ring Viton £1.90

1k 991.354.11 Cylinder £41.20

1l 991.354.2M4 M4 Nut £2.56

1m 401.015.06 O ring £2.75

1n. 110.800.10 O ring £5.15

1p 991.356.05 Spring seal std valve (1) £33.70

1p 992.356.05 Spring cat valve (2) £33.70

1q 991.352.10 Needle £89.20

Modular colour change systemManifold spare parts

2 78-025 End block £85.00

3 78-026 Valve block £121.25

4 78-027 Spacer £12.99

5 1 78-028/2 Set 4 rods 2 valve £71.20

1 78-028/3 Set 4 rods 3 valve £71.20

1 78-028/4 Set 4 rods 4 valve £71.20

item order ref description r.r.p

1 78-028/5 Set 4 rods 5 valve £71.20

1 78-028/6 Set 4 rods 6 valve £71.20

1 78-028/7 Set 4 rods 7 valve £80.40

1 78-028/8 Set 4 rods 8 valve £80.40

1 78-028/9 Set 4 rods 9 valve £80.40

1 78-028/10 Set 4 rods 10 valve £80.40

6 8 248-4422 M8 dome nut each £1.72

7 8 530-797 Washer £0.65

8 1 0116-24V Viton O ring £1.51

9 2 293 369 50 Bolt M5 x 50mm £1.28

9 2 293-369-60 Bolt M5 x 60mm £1.28

10 1 0140-10V Viton O ring £1.51

11 1 0160-10V Viton O ring £1.51

12 1 PO2 BP6 Plug £7.70

13 1 74-002/30 Adaptor 3/8x1/4(M) £7.50

14 2 BS 38 Bonded seal £1.51

15 2 530-832 Split washer £0.90

16 1 174-811/30 Adaptor 1/8 x 1/4 BSP(MM) £6.65

17 1 174-801/31 Washer copper £2.75

250bar compact systemColour valves

ECCV-250S Standard valve £480.00

ECCV-250C Catalyst valve £520.00

Colour Valve ECCV-250 spares

ECCV-C30 Body £125.00

M4 x 12 Cap head screw £3.95

ECCV-C12. Cylinder boss £55.10

0300-10 O ring £1.15

0220-40 O ring £1.15

ECCV-C13 Piston £21.50

M4 x0.7mm Nut/washer £2.56

ECCV-C11 Cylinder £41.20

CCV 1112-2 Spring £5.60

401.015.06 O ring £1.70

991.354 .31 Spacer Std £23.06

991.354.31m Spacer Cat £22.00

992.356.05 Spring seal £33.70

ECCV-C35 Spindle £55.00

78-121/20 Seat Delrin £30.77

991.352.05 Seat green £14.25

ECCV-C15 Spindle head £10.48

order ref description r.r.p

Compact system partsManifold

ECCV-C41 End block £91.00

ECCV-C40 Dual port block £109.00

78-027 Spacer £12.99

74-311/30 Plug £7.70

74-001/30 Adaptor 1/4BSP(M)(M) £7.50

BS 38 Bonded seal £1,50

0116-24V Viton O ring £1.50

78-028/2 Set 4 rods 2 blocks £71.20

Set 4 rods 3 blocks £71.20


Set4 rods 5 blocks £71.20


248-4422 Dome nut stainlss steel £1.72

530-797 Washer stainlss steel £0.64

Colour valve ECCV-020 20barLPVC-020 Low pressure colour valve £320.00

item qty order ref description r.r.p

item qty order ref description r.r.p

134

section twelve

135

Blast and jetting hoses,blast helmet

and miscellaneous itemsScorpion blast helmet and air supply equipment page 136

Supreme triple filter unit page 137

Steel filter tube assembly page 137

Blasting hoses page 138

Water and sewerjetting hoses page 139

DP1.3 with rotary cleaningnozzle system page 140

Price list page 141



For the finest corrosion resistant coating, surfaces must be

clean and rust free. Exitflex blast and jetting hoses are high quality, hard

wearing, and reliable for continuous duty. In such difficult environments

operators need a high degree of protection. Blast helmet and filtration

equipment ensures that operators can work safely

in such hostile work environments.

136

section twelve


The Scorpion helmet was specifically designed forshot blasting applications. The helmet is highlyvisible comfortable to wear and large enough toaccommodate ear defenders (not included). Thehelmet features an inner helmet for stability, a tear offvisor system to ensure clear view, and it is of robustheavy duty construction throughout.

The complete system comprises:• Fully assembled helmet, ready for use, with belt

hose and adjustable regulator, air deficiency gaugeand warning whistle

• Heavy duty nylon cape, reinforced in high stress areas

• Spare disposable visor covers

• Easy connect air feed ensuring quiet air supply.

• Comfortable fit waist belt with a size range22/48 inches

Features

• Wide angle visibility.

• An adjustable regulator, with dual sensory warningwhistle and pressure gauge

• Safe operation. Low air flow warning if air pressure drops below the minimum requirement

• Ergonomic design with easy tear off visors

• Comfortable quiet air supply- less than 80dBA

• Suitable for use with neck band ear defenders

• Chinstrap option

• Nominal protection factor (NPF)=500

• Approved to BSEN 14594:2005 Class 4B and CE marked

part number description50-528 Cool Air unit (excluding regulator)

50-530 Scorpion CE approved Outfit completewith HD Cape Visor covers and belt with regulator.

50-532 Air flow test meter. ( accessory item)

50-531 Adjustable regulator complete with dualwarning system and hose.

50-450 Blue Cape, (Heavy duty) with neck seal.

50-451 Visor seal.

50-452 Hose and fittings assembled.

50-453 Headband.

50-454 Visor door c/w strike and hinge.

50-456-K100 Outer static disposable covers-100 pack

50-457-K6 Tear off disposable visor covers- 6 pack

50-458 Inner visor 1mm

50-459 Intermediate visor 0.5mm.

50-460 Chinstrap (optional accessory)

Scorpion helmet Air supply equipment 50-517 SUPREME FILTER TRIPLE FILTER UNIT

The 50-517 is a robust piece of equipment with adesign making it ideal as a portable air supply filter inan industrial and contract environment.The user can depend upon the performance todeliver clean air regardless of the unfriendlyenvironment. This is a practical unit with easy tochange filters.

Benefits

• Easy read pressure gauge

• Supplies up to two users

• Minimum maintenance, self draining

• Easy carry and low risk of damage

Features

• Filters in excess 660 litres/min

• Chemically resistant housing/handle

• Three stage unit, auto drainingparticulate, oil and carbon filter

• Light, only 5kg

• Window for easy pressure check

Filter Accessory50-508 Optional adaptor ‘Y’ piece andtwo QD couplings plus inletfitting.

50-518 STEEL FILTER TUBE ASSEMBLY

This standard filter tube is mounted on 4 steel legswhich are convenient for bolting to the factory floorwhen in a permanent placement. This is a heavy duty construction item and is anexcellent economical filter.

Features

• Popular item in shotblast locations

• Single point outlet

• Manual drain easy to access

• Easy to replace the filter element

• Heavy construction

50-517

50-518

138

section twelve

139

WATER AND SEWER JETTING HOSESBLASTING HOSES


Blast and jetting hoses

StandardsAbrasion loss of the tube, in accord with DIN 53516.

ApplicationAbrasion resistant soft wall hose,used for the deliveryof sand and cast steel shot. Manufactured with ananti static rubber compound.

TemperatureFrom -40ºC (-40ºF) to +70ºC (+158ºF).

Part number Hose ID Hose OD Working pressure burst pressure weight Coil lengthin mm in mm bar psi bar psi kg/m lb/ft m

ESB 25-7 1 25 1.53 39 12 174 36 520 0.80 0.54 40

ESB 32-8 1.25 32 1.88 48 12 174 36 520 1.10 0.74 40

ConstructionTube Black smooth, anti static SBR/NR rubber,

abrasion resistant. Reinforcement, high strength synthetic cord

Cover Black smooth, (wrapped finish) anti staticSBR/NR rubber, abrasion resistant

Branding Exitflex

Marking Continuous in bordeaux colour stripe.

Hose connections

75-3182 1 x 7/8in OD hose coupling

75-3181 1 x 1/2in OD hose coupling

75-G182 1 x 7/8in coupling gasket

75-G181 1 x 1/2in coupling gasket

EF301 Thermoplastic Sewer Jetting HosesApplicationWidely used for clearing sewers at 175bar. Theproduct has a special fully bonded construction withoptimum cut and wear resistance. The cover isresistant to microbiological degradation. Very hardwearing. Light when compared to rubber sewercleaning types.. Standard lengths are 100 and 120metre coils. Custom lengths are available to order SpecificationInner tube Thermoplastic elastomer.Reinforcement EF301 single or double braid

of synthetic fibre.Cover Orange colour, polyurethane. Temperature -40º C to + 60ºC standard

Special colours, and marking available to order.

Range

EF301-8. 1/2in bore OD 20.6mm 1/2 BSP(F) 175bar MWP part number EF301-8/100/B8MF for 100m assembly

EF301-12 3/4in bore OD 29.2m 3/4 BSP(F)175bar MWP.part number EF301-12/100/B12MF for 100m assembly

EF301-16 1in bore OD 36.8mm 1inBSP(F) 175bar MWP part number EF301-16/100/B16MF for 100m assembly.

EF301-20 11/4in bore.OD 45.7mm 11/4 BSP(F) 175bar MWP part number EF301-20/100/B20MF for 100m assembly

We would welcome your enquiries for the otherpressure ranges - 193bar (2800psi), 210bar (3000psi)and 280bar (4000psi).

EF154 Rubber Double Reinforced Wash HoseApplicationHigh pressure assemblies for 276bar maximumworking pressure. Suitable for water cleaning waterand oil based fluids and is widely used in agricultureand engineering environments. Compact OD withexcellent abrasion resistance.

Specification and application standardsInner tube Water & oil resistant synthetic rubberReinforcement Dual steel wire braidsCover. Black synthetic rubber, resistant to

oil, water, weather and abrasion

Temperature -40º C to + 100º C.standard120º C.Intermittent

Bore 1/2in bore OD 22mm MWP 276bar MWPBurst pressure 1104bar minimumBend radius 130mm minimumStandards EN-853-25N Exceeds SAE 100 R2.

Part numbers

EF154-8/100/B8 MFEF154-8/100/B8 FF Other custom lengths are available

140

section twelve

141

DP.1.3 with rotary cleaning nozzle system

The DP system with 63-410 rotary nozzle is designedto hydraulically clean smaller bore drain pipes inexcess of 19mm bore, regardless of pipe routing orconfiguration.

DP is extremely flexible and the hose connection hasa very short tail design to permit tight bends to benegotiated with relative ease.

The system employs the DP 3/16 bore hose whichhas an OD of 9.2mm and a maximum workingpressure of 250bar. The design pressure range for thenozzle is from approximately 50bar (725psi) to100bar (145psi) .

• Easy to operate and handle

• Easy to install to pumping units

• Suitable for hot or cold water

• Vigorous cleaning actionIt can be seen from the chart below that the nozzlespins up to 9500rpm at 100bar with an output of 14.5litres/min. Higher pressures up to 200bar can beused

The nozzle design harnesses the power of the waterjets to drive the nozzle along the drains, selfpropelling.

The flow of the water is backward toward the draininlet and the powerful water action clears blockagesand flushes the piping simultaneously.

The OD of the system is below 12mm thus enablingease of entry to drain systems and providing an easyto use and an easy to store solution for draincleaning.

NB The system is not designed for steam boiler pipecleaning.

Part numbers

63-410/0 Rotary nozzle, 4 x 1mm jets

63-412/0 Rotary nozzle,2 x 1.2mm, +2 x 1mm jets

63-310/30 Fixed nozzle. 3 x 1mm jets, rear

63-317/30 Fixed nozzle 4 x 1mm jets, 3 rear, 1 forward

63-562/18 Nylon seal for all jets

DP.1.3 Bronze, 3/16in bore hose 250bar MWP.available in standard and custom lengths

Bar 50 75 100Average rpm 7,500 8,500 9,500Litres per minute 10.4 12.8 14.5

www.exitflex.co.uk

Price list

Shot blasting helmet equipment50-530 Scorpion shotblast helmet

outfit complete £236.00

50-531 Adjustable regulator, dualwarning device and hose £116.00

50-532 Air flow test system £450.00

50-528 Cool air chiller unit £120.00

Spare parts

50-450 Blue cape (HD) neck seal £68.00

50-451 Visor seal £8.00

50-452 Hose and fittings £12.70

50-453 Headband £10.00

50-454 Internal air assy complete with bulkhead £22.00

50-455 Visor door complete with strike and hinge £32.00

50-456-K100 Visor covers (100) £23.40

50-457-K6 Pack 6 tear off visor covers £2.80

50-458 Inner visor 1mm £1.38

50-459 Intermediate visor 0.5mm £1.04

50-460 Chinstrap £10.50

Air supply equipment50-518 Filter tube assembly £190.00

50-306 Replacement element filter tube £69.50

50-508 Optional Y piece with 2 QDfor filter tube £54.00

50-517 Supreme triple filter £280.00

Blast hoses ESB 25-7 1in bore 40m coil £320.00

ESB 32-8 1 1/4in bore 40m coil £395.00

75-3181 Hose coupling 1in bore £13.00

75-3182 Hose coupling 1 1/4in £13.00

75-3181w Gasket for 75-3181 £2.95

75-3182w Gasket for 75-3182 £2.95

ref description r.r.p ref description r.r.p

Sewer jetting hosesEF301-8/100/B8MF £596.00

EF301-12/100/B12MF £750.50

EF301-16/100/B16/B16MF £948.00

EF301-20/100/B20/B20MF £1730.50

EF301-8/120/B8MF £716.00

EF301-12/120/B12MF £900.00

EF301-16/120/B16MF £1136.00

EF301-20/120/B20MF £1970.50

We welcome your enquiries for the pressure ranges,193bar (2800psi) 210bar (3000psi) and 280bar (4000psi)

Rubber wash hose EF154-8/100/B8MF £400.00

EF154-8/100/B8FF £400.00

DP Drain cleaning systemDP.1.3.0700.B2B4 7m £53.00

DP.1.3.1000.B2B4 10m £75.50

DP.1.3.1500.B2B4 15m £108.80

DP.1.3.2000.B2B4 20m £154.40

63-410/0 Rotary nozzle £94.73

63-412/0 Rotary Nozzle £94.73

63-310 Fixed nozzle £18.40

63-317 Fixed nozzle £19.02

63-562/18 Gasket £6.00

www.exitflex.co.uk

143142

SWAGE GUIDE CHART

HOSE TYPE REF FERRULE JAW SIZE NOMINAL SWAGE DIA ID PROBE ‘GO’ ID PROBE ‘NO GO’

PA1.2 75-800 8 9.0 1.4 1.6

TC1.2 75-800 8 9.0 1.4 1.6

PA1.3 75-805 9 12.0 2.1 2.4

PR1.3 75-805 9 12.0 2.1 2.4

SX2.3 75-806 9 12.2 2.1 2.4

KX2.3 75-803 9 12.2 2.1 2.4

PA1.4 75-810 14 15.0 3.4 3.7

PA2.4 75-812 15 16.5 3.4 3.7

PAT2.4 75-815 15 16.0 3.4 3.7

SX2.4 75-815 15 16.0 3.7 3.9

KX2.4 75-815 15 15.8 3.7 3.9

HD2.4 75-812 15 16.0 3.4 3.7

PA1.6 75-820 17 18.5 5.8 6.2

PA2.6 75-826 18 21.5 5.8 6.2

SX2.6 75-826 18 20.0 6.2 6.4

HD2.6 3506 18 20.3 5.8 6.2

PA1.8 75-830 21 21.8 8.8 9.2

PA2.8 75-835 24 25.3 8.8 9.2

PA2.12 75-838 33 35.2 13.3 13.7

TC2.12 75-838 33 35.2 13.3 13.7

1/2in suction 75-830 18 21.5 8.8 9.2

3/4in suction IT-12 27 32.8 13.3 13.7

1in suction S2-T16 39 41.5

CRIMP NUT E 2 CE E 3 JI E 4 CE E 4 JI E 4 MS E 4aS BP E 5 JISWAGE DIA 11 11.7 16.2 15-15.3 18.3 15 16.5

CRIMP NUT E 6 CE E 6 JI E 6 MS E 8 CE E 12 CESWAGE DIA 19.3 20.8 19.5 20 29.2

This guide chart gives recommended swage details for Exitflex inserts and ferrules.If in doubt, please ask for assistance.

144

Carriage and packing chargesEffective date 23rd April 2012Carriage charges mainland Britain, excluding VAT which is charged extra atcurrent rate on all invoices.

Carriage is free on orders nett value £300.00 excluding VAT.

Minimum order value excluding VAT and carriage is £20.00

All price lists show ex works prices, carriage extra, and subject to change withoutnotice.

NEXT DAY SERVICESPlease ensure Exitflex are aware that a next day delivery is required and confirmthat the order can be supplied in the time requested. Exitflex (UK) Ltd cannot beheld responsible for any failure by a carrier to maintain delivery dates.

Data pack £9.40

Consignments up to 10kg £13.50

Consignments up to 30kg £15.45

Consignments above 30kg £26.50

Scotland. 2 day service £ Enquire for prices

Eire and N Ireland £ Enquire for prices

Timed AM deliveries £ Enquire for prices

PALLET RATE

Next day service £65.00

2-3 day service £55.00

POSTAGE and PACKINGSubject to Royal Mail charges and conditions.

Standard letter up to 100g First class £1.55

Packet 100-500g First class £3.65

Packet 500-1550g First class £7.50

Exitflex (UK)Ltd shall not be liable for damage or loss of equipment followingdespatch including damage or loss in transit. Damage to goods or shortagesmust be advised within 24 hours of receipt.Insurance against loss or damage may be available at extra cost if required.

1. Prices

Prices are subject to change without notice.

2. Cancellation, Returns, Re-stocking Charges

Orders once placed and accepted by EXITFLEX (UK)LTD can only be cancelled with our consent and onterms that will indemnify us against loss. Re-stockingcharge is 15% of invoice value.

3. Delivery

EXITFLEX (UK) LTD shall not be liable for damage toor loss of equipment following despatch, includingany damage or loss in transit. Insurance if requiredwill be charged extra.EXITFLEX (UK) LTD shall not be liable for any delay inthe production or delivery of any of the equipmentcovered hereby if such a delay shall be due to one ormore of the following causes; flood, accident, delay intransportation, inability to obtain material, war,embargo demand or requirement of the government,or any other cause whatsoever beyond the reasonablecontrol of the company.

4. Warranty

Based on the logical assumption that manufacturingand material deficiencies will manifest themselveswithin the guarantee period, all goods sold under themanufacturer’s trademark are guaranteed for theperiod stated by the manufacturer from date ofpurchase, by the original purchaser, against defectivematerial and workmanship (but not against damage orwear caused by installation, or tampering in a mannerto impair its normal operation,) when the goods areinstalled and operated in accordance with the factoryrecommendations and instructions. EXITFLEX UK)LTD will repair or replace free of charge all suchdefective products if returned prepaid to the factor orto an authorized EXITFLEX depot. In all cases withinthe guarantee period where examination indicateddamage to causes other than defectiveness, repairswill be made at a reasonable charge.Purchaseassemblies which are incorporated in EXITFLEXproduct lines, carry the manufacturers regularwarranty.

5. Representations

We make no representations, warranties orconditions, expressed or implied, except thosestipulated by the manufacturer of the goods and weneither assume for us or on behalf of the manufacturerrepresented, any other liability in connection with thesale of the products.

6. Passage of Title

It is expressly agreed, between you and ourselves thatan essential and controlling condition of the contract

of sale is that the legal title to, ownership of, right topossession of and control over, and risks of loss ordamage to the merchandise which is subject matter ofany agreement, shall remain with us until the shipmentphysically reaches a designated port of entry for theimporting country and until we have delivered theshipping documents to you within said country. The method of shipment whether by air,truck, maritime freight, parcel post, or by acombination of any of these; the manner of paymentor consignment whether to us, our agent or to anagent for both; or any implication or statement whichmay appear on any other document in relation to anysale under these prices shall in no way limit or modifyour right to possession of these until fully paid remainthe property of EXITFLEX (UK) LTD . Any use of theterms ‘F.O.B’, ‘F.A.S’ or ‘C.I.F’ will apply only to priceand not to title.

7. Purchase Orders

Any terms or conditions of any customer’s order orother instrument which are in addition to orcontradictory with any term or condition of thisproposal shall not be binding on EXITFLEX (UK) LTDand shall not apply to this sale.

8. Interest Charges

EXITFLEX (UK) LTD reserve the right to apply interest charges calculated at the rate of 8% (eight) above thecurrent bank rate per month on all overdue accounts.An account is considered overdue if not paidaccording to agreed terms, which are due 20th of themonth following month of invoice as noted in clause12. We understand and may exercise our statutoryright of interest under the Late Payment ofCommercial Debts (Interest) Act 1998 if we are notpaid according to our credit terms.

9. Disputes

Contracts shall be subject to the law of England andWales.

10. Minimum Order

Minimum order value £20.00 excluding carriage andVAT.

11. Carriage

Unless otherwise agreed carriage and packing will becharged to the buyer.All prices quoted are EX-WORKS.

12. Payment

Unless otherwise stated all payments shall be madenett by the 20th day of the month following the monthof invoice and such payment terms shall be theessence of the contract.

Terms and conditions

Exitflex SACh-1196, Gland SwitzerlandTel:(0041) 229999299Fax:(0041) 223642505www.exitflex.come-mail: [email protected]

Exitflex (UK) Ltd

5 Airfield Road, Airfield Industrial EstateChristchurch BH23 3TG United KingdomTel: +44 (0)1202 478334 Fax: +44 (0)1202 488110www.exitflex.co.uke-mail: [email protected]

Exitflex Dana Marketing Pty Ltd

P.O. Box 2447, Rowville Victoria 3178AustraliaTel: +61-3-9752-8918Fax: +61-3-9011 6179e-mail: [email protected]

Exitflex GmbH

Am Keuper 16D-90475 Nürnberg GermanyTel: +49 9128 72132-40Fax: +49 9128 72132-45www.exitflex.dee-mail: [email protected]

Exitflex USA

254 Raritan Center ParkwayEdison, New Jersey 08837-3610 USATel: +01 732 512 9141Fax: +01 732 512 9145www.exitflexusa.come-mail:[email protected]

Exitflex AB

Varlabergsvagen 24BS-434 39 Kungsbacka, SwedenTel: +46 300 31970Fax: +46 300 564780www.exitflex.see-mail: [email protected]

Exitflex PL Sp. z.o.o.

Plac Gornoslaski 20/581-509 GdyniaPolandTel: +48 58 620 70 41www.exitflex.comwww.exitflex.ple-mail: [email protected]

Top Quality - Best Results

The Exitflex GroupSubsidiary and Associated Companies

© Exitflex issue two 2013

Distributed by

Spray tips, hoses, systems and accessories - Exitflex Surface Treatment Accessories... · section...

Documents

Transcript of Spray tips, hoses, systems and accessories - Exitflex Surface Treatment Accessories... · section...