7/28/2019 SPM-ES C242 Handout 11-12

1/2

BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE-K.K.BIRLA GOA

CAMPUS

INSTRUCTION DIVISION

SECOND SEMESTER 2011-2012

Course Handout (Part II) 04-01-2012

In addition to Part I (General Handout for all courses appended to the Time Table), thisportion gives further specific details regarding the course.

Course No.: ES C242

Course Title: STRUCTURE AND PROPERTIES OF MATERIALS

Instructor-in-charge: Raghavendra D. Naik

INSTRUCTORS: P. Nandakumar, P.N.Deepak, Raghavendra Datta Naik, Ranjit Patil,Rabi Narayan Panda, Vikas Chaudhari, K. P. Jayadevan

Course Description:

The course gives an introduction to the structure ofmaterials (at the atomic and microscopic level). The relation between structure

and properties of materials is also highlighted. The course discusses the structure

and properties of Metallic, Ceramic and Polymeric materials.

Scope and objective of the course:

The objective of the course is to give a basic understanding of the relation

between the structure and properties of materials. Structure of metallic, Ceramicand Polymeric materials will be discussed. The main objective of the course is to

show how the type of bonding and crystal structure affect the mechanical,

electrical and chemical properties of these materials.

Text Book:

Callisters MATERIALS SCIENCE AND ENGINEERING- adopted by

R. BALASUBRAMANIAM., Wiley India (2010)

1. Course PlanLecture

No.

Topics Chapters

1. Introduction 1

2. Atomic bonding in solids 2.5-2.8

3-8 Metallic structures 3.1-3.7, 4.1- 4.15

9-12 Defects and dislocations 5.1-5.9

13-15 Diffusion 6.1-6.6

16-18 Deformation mechanism 10.1-10.10

7/28/2019 SPM-ES C242 Handout 11-12

2/2

19-21 Phase diagrams 7.1- 7.12, 7.17

22-23 Iron-carbon system 7.18-7.20

24 Kinetics of phase transformation 8.1-8.4

25-26 Correlation of properties to

microstructure

8.5-8.6

27-28 Mechanical behaviour of Fe-Calloys

8.7-8.9

29-30 Mechanical test behaviour 9.5-9.7

31-32 Structures of Polymers 13.1-13.10, 4.18-4.19

33-35 Mechanical test behaviour-Polymers 14.1-14.9

36 Corrosion 16.1-16.9

37 Thermal properties 19.1-19.5

38 Electrical properties 17.1-17.9

39 Magnetic properties 18.1-18.7, 18.9-18.10

40 Optical properties 20.11-20.14

2. Evaluation scheme:Component Duration Weightage(%) Date & Time Remarks

Test-I 60 Min 25 % 25/02/12 Closed Book

Test-II 60 Min 25 % 02/04/12 Open Book

Comprehensive Exam 3 Hours 50 % 03/05/12 Closed Book

1. Make-up Policy: Make Up for any component will be given only in genuine cases. In allcases prior intimation must be given to IC.

2. Chamber Consultation hour: To be announced in class by instructors3. Notices: Notice, if any, concerning the course will be displayed on the FTP/

Department of Mechanical Engineering Notice Board.

Instructor-in-charge

ES C242