spittler_2010_2011_part1
description
Transcript of spittler_2010_2011_part1
CATALOGUE 2010/2011
Light up your ideas
General Comments
This catalogue from SPITTLER supersedes all previous catalogues. While this catalogue is in circulation, we reserve the right to implement technical and formal changes to our products that serve to improve them, or to accommodate changes in legal regulations. We will be happy to make current data available at your request.
We deliver all luminaires without lamps.
All measurements are given in millimeters. The mentioned measurements, weightsand technical details are non-binding. We reserve the right to make changes in ourconstruction.
When installing lighting fixtures, regulations VDE 0100 and VDE 0108 must be obser-ved, as well as the „Richtlinien für Brandschutz, elektrische Leuchten, Form 2005“ des Verbandes für Sachversicherer e. V. Köln (VdS) [„Guidelines for Fire Protection, electrical lighting“ from the Association of Insurers, Cologne].In addition, enclosed product information/installation instructions must be followed.
When setting up high or low voltage lamps, the mentioned lamp load is the maximum allowable load.When setting up lamps for fluorescent lamps or compact fluorescent lamps, use only the mentioned lamp type with the given wattage.
All lights conform to European guidelines, have acceptable electromagnetic emission levels, follow low voltage guidelines and carry the CE mark.
All lights that carry the F symbol fulfill the requirements for installation on normal non-flammable materials.
Our “General Delivery Conditions” are for all deliveries valid.
We assume no responsibility for errata.
01_Inhalt.indd 3 28.05.2010 18:15:27 Uhr
4
34
108
76
86
127
100 127
7040
127
78
88
120
102 139
46
112
80
90
104 124
52
116
84
94 96
106
72 58 64
SL 730
SL 730
SL 730
SL 730
SL 787
SL 790 SL 787
SL 73SL 740
SL 787
SL 740
SL 740
SL 650
SL 640 SL 790
SL 782
SL 624
SL 624
SL 787
SL 650 SL 650
SL 787
SL 650
SL 73
SL 624 SL 650
SL 650 XF
MODE LUM SL 624 SL 650
NEW NEW
NEW
NEWNEW
NEW
NEW
NEW
128 132 130 140
SL 790
NEW NEW NEW
www.spittler.com
Pendant luminaires
Pendant luminaires for continuous mounting
Free-standing luminaires
Surface mounted luminaires
Surface mounted luminaires for continuous mounting
Recessed luminaires Continuous mounted recessed luminaires
Office and Administration Lighting
Lighting System
SL 787 trimless SL 787 shadow gape SL 787 with frame
01_Inhalt.indd 4 04.06.2010 14:24:53 Uhr
5
174
196 192
198
222
216
182172
194 234
200
229
202
230 231
204
232 234
208 212
186 188
163
190
176
242 234
166
154 240
178
156 150 152 158 160 160
180
AS 12
MIDI WALL SH 12
KR 12 EB
MIDI LUM
KA 18 AB
MIDIAS KA 12
MODE R WALL BOX
KR 18 EB
PL 910
KR 23 LED
PL 912 PL 916
KA 12 EB
PL 922
KA 18 EB KA 12 AB
MODE R TRACK BOX MODE 20 TRACK BOX
AS 13
MODE TRACK
AS 18 AS 19
EB 01
AS 23 LED
EB 02 EB 12 EB 18 EB 10 EB 21 EB 22
AS 27
NEW NEW
NEW NEW
NEW
NEW
NEW NEW NEW
NEW NEW NEW
234
TECHNOLOGY
L E D
TECHNOLOGY
L E D
Product overview
Recessed lights
Track lights
Wall luminaires Shelf luminaires
Gimbal luminaires
Pendant luminaires
Retail Lighting
Tracks Optics
Optics
Optics
Optics
Power Units
01_Inhalt.indd 5 28.05.2010 18:15:34 Uhr
6
249
257
274
281
314
317
337 349
388
250
260
278
284
328
318
339 350
254
263
287
390
321
340
251
266
293
324
341
252
268 381
300
388
342
308
343
381
344
DL 165
DL 220 eco
Mini DL 105
DL 125 modular
DL 260 XF
DM 130 modular
AM 220 AB 260
Dekore
DL 200
DL 255 eco
DL 255 XF
DL 150 modular
DL 310
DM 190 modular
AM 255 AB 320
DS 215
DL 315 eco
DL 185 modular
DM 225 modular
AB 315
DL 160
DM 225 eco
DL 220 modular
DM 260 modular
AB 245
DL 195
DM 260 eco
DL 255 modular
AB 250
DL 315 modular
AB 310 AB 380
NEW
NEW NEW NEW NEW NEW NEW
NEW NEW NEW NEW
TECHNOLOGY
L E D
www.spittler.com
Trimless downlights
Eco-friendly recessed downlights
Round recessed downlights
Modular – Round recessed downlights
Square recessed downlights
Modular – Square recessed downlights
Round surface mounted downlights Square surface mounted downlights
General Lighting
Attachments
Attachments
Attachments
Attachments
01_Inhalt.indd 6 28.05.2010 18:15:43 Uhr
7
JOKER IN
NEW
406
352
405
420
377
372354
402
467
378
372
356
399
444
360
403
432 468 484
480 442
364
403
366
416
371
SL 740
JOKER IN
EXTRUDO DITTIK LUM FLAT JUEL KAI KUBA LIGHTBALL OPTA PRO INTERIOR
WAVE 12-32 WAVE 35
EM 28
KL 35SL 741
NV 50
PULSAR 42
EM 29
KL 45
SL 73
NV 63
PULSAR 52
EOLO
NV 70
PULSAR 80
MODE WALL
NV 100 KA 8 EB
PULSAR 120
WL 32
406
NVS 53
KL 34
NEW NEW
NEW
415 411 411 410 410 409
ALU IN
NEWNEW NEW NEW NEW
PULSAR 1-5
NEW
436 466
412
TECHNOLOGY
L E D
TECHNOLOGY
L E DTECHNOLOGY
L E D
Product overview
Wall luminaires
Low voltage recessed lights
LED recessed lights
Rescue sign luminaires
General Lighting
Accent Lighting
Light and Design
Power Units
01_Inhalt.indd 7 28.05.2010 18:15:48 Uhr
8
492
520 523 531
498
502
514
516
494
500 506
510
496
504
508 512
www.spittler.com
Customised Lighting
Technical details
Projects
Asklepios-Clinics, Germany Centrum Galery, Germany
University of Modern Arts, Germany
Tecnostudio, Italy
VW Exhibition Stand, Turkey
Vocational Rehabilitation Centre, Germany
Primary School Diesterweg, Germany Justice Centre, Germany
Museum of Modern Arts, Germany
Bucerius Law School, Germany
Lake-side Hotel, Germany
Kreuz Grammar School, Germany Swiss Re Headquarter, UK
Light bulb Technology Informations
01_Inhalt.indd 8 04.06.2010 14:23:50 Uhr
9
VW Messestand in Istanbul, Turkey
01_Inhalt.indd 9 28.05.2010 18:15:56 Uhr
10
PERFORMAnCE In LIGhTInG
Design and layout SPITTLER Lichttechnik Gmbh, Goslar www.spittler.com Boutique Creativa \\ Visual Design \\ Milano - Barcelona www.boutique-creativa.com
Photos/ Pictures Dipl. Fotodesigner Wolfgang Schwager, Aachen (Germany) Fotodesign - Andreas Braun, hameln (Germany) Germano Borelli, Botticino (Italia) Boutique Creativa - Luca Ugolini e Massimo Scavazzini, Milano (Italia) Daniel Vieser, Architekturfotografie, Karlsruhe (Germany)
AB 245 341 Surface mounted downlights
AB 250 342 Surface mounted downlights
AB 260 349 Surface mounted downlights
AB 310 343 Surface mounted downlights
AB 315 340 Surface mounted downlights
AB 320 350 Surface mounted downlights
AB 380 344 Surface mounted downlights
ALU IN 409 Recessed lights
AM 220 337 Surface mounted downlights
AM 255 339 Surface mounted downlights
AS 12 174 Track lights
AS KA12 172 Track lights
AS 13 163 Track lights
AS 18 176 Track lights
AS 19 166 Track lights
AS 23 LED 178 Track lights
AS 27 180 Track lights
DITTIK LUM FLAT 467 Pendant luminaires
DL 105 274 Recessed downlights
14 Performance In Lighting: Lighting from one source The distribution network
The Brands 15 SPITTLER 16 Prisma Architectural 17 SBP Urban Lighting 18 Prisma 19 SBP
20 Development, design and technical know-how Planning basics Warranty 21 Environment
22 Fondazione Blu: for a future of social development
24 SPITTLER – We light uo your ideas Made in Germany – high Vertical Integration as Locational Advantage 26 A sane office light 27 Lighting solutions for bright minds 28 Light in sales rooms 29 Special solutions
30 Office and Administration Lighting 144 Retail Lighting 244 General Lighting 396 Accent Lighting 418 Light and Design 490 Customised Lighting 518 Technical details
532 Index
Any further reproduction of the catalogue is not allowed. You could ask for more hard copies but we would suggest to download the catalogue under www.spittler.com. SPITTLER and Performance in Lighting champion for a sustainable management of diminishing resources.
SPITTLER® is a company of Performance in Lighting SpA.
DL 125 modular 281 Recessed downlights
DL 150 modular 184 Recessed downlights
DL 160 251 Trimless recessed downlights
DL 165 249 Trimless recessed downlights
DL 185 modular 287 Recessed downlights
DL 195 252 Trimless recessed downlights
DL 200 250 Trimless recessed downlights
DL 220 eco 257 Recessed downlights
DL 220 modular 293 Recessed downlights
DL 255 eco 260 Recessed downlights
DL 255 modular 300 Recessed downlights
DL 255 XF 278 Recessed downlights
DL 260 XF 314 Recessed downlights
DL 310 328 Recessed downlights
DL 315 eco 263 Recessed downlights
DL 315 modular 308 Recessed downlights
DM 130 modular 317 Recessed downlights
DM 190 modular 318 Recessed downlights
DM 225 eco 266 Recessed downlights
01_Inhalt.indd 10 28.05.2010 18:15:56 Uhr
11
SPITTLER
DM 225 modular 321 Recessed downlights
DM 260 eco 268 Recessed downlights
DM 260 modular 324 Recessed downlights
DS 215 254 Recessed downlights
EB 01 154 Recessed lights
EB 02 156 Recessed lights
EB 10 158 Recessed lights
EB 12 150 Recessed lights
EB 18 152 Recessed lights
EB 21 - EB 22 160 Recessed lights
EM 28 377 Rescue sign luminaires
EM 29 378 Rescue sign luminaires
EXTRUDO 424 Pendant luminaires 421 Wall luminaires 430 Recessed lights
EOLO 360 Wall luminaires
JUEL 448 Pendant luminaires 445 Wall luminaires 454 Track lights
JOKER IN 405 Recessed lights
KA 8 EB 406 Gimbal recessed luminaires
KA 12 AB 212 Gimbal pendant luminaires
KA 12 EB 204 Gimbal recessed luminaires
KA 18 AB 216 Gimbal pendant luminaires
KA 18 EB 208 Gimbal recessed luminaire
KAI 433 Pendant luminaires 433 Wall luminaires 434 Free-standing luminaires
KL 34 371 Wall luminaires
KL 35 372 Wall luminaires
KL 45 372 Wall luminaires
KR 12 EB 198 Gimbal recessed luminaires
KR 18 EB 200 Gimbal recessed luminaires
KR 23 LED 202 Gimbal recessed luminaires
KUBA 436 Wall luminaires
LIGHTBALL 467 Pendant luminaires 467 Wall luminaires
MIDI 222 Pendant luminaires 182 Track lights 196 Wall luminaires
MODE 72 Pendant luminaires 186 Track lights 194 Wall luminaires
NV 50 402 Recessed lights
NV 63 399 Recessed lights
NV 70 403 Recessed lights
NV 100 403 Recessed lights
NVS 53 406 Recessed lights
OPTA 469 Surface mounted luminaires 470 Pendant luminaires
PL 910 229 Pendant luminaires
PL 912 230 Pendant luminaires
PL 916 231 Pendant luminaires
PL 922 232 Pendant luminaires
PRO INTERIOR 484 Recessed wall luminaires
PULSAR 411 Recessed luminaires
SH 12 192 Shelf luminaires
SL 624 58 Pendant luminaires 80 Free-standing luminaires 94 Surface mounted luminaires 112 Continuous mounted luminaires
SL 640 102 Recessed luminaires
SL 650 64 Pendant luminaires 96 Surface mounted luminaires 104 Recessed luminaires 116 Continuous mounted luminaires
SL 650 XF 106 Recessed luminaires
SL 73 70 Pendant luminaires 84 Free-standing luminaires 356 Wall luminaires
SL 730 34 Pendant luminaires 76 Free-standing luminaires 86 Surface mounted luminaires 108 Continuous mounted luminaires
SL 740 40 Pendant luminaires 78 Free-standing luminaires 88 Surface mounted luminaires 352 Wall luminaires
SL 741 354 Wall luminaires
SL 782 46 Pendant luminaires
SL 787 52 Pendant luminaires 90 Surface mounted luminaires 127 Lighting system
SL 790 100 Recessed luminaires 140 Lighting system
WAVE 480 Wall luminaires
WAVE 35 442 Wall luminaires
WL 32 366 Wall luminaires
01_Inhalt.indd 11 28.05.2010 18:15:56 Uhr
12
PERFORMAnCE In LIGhTInG
SL 787 – Pendant and surface mounted luminaires
Page 52
Simple elegance and clear line alignment describe the luminaires of
series SL787. The pendant luminaire is available with pure direct light
portion as well as direct-indirect light distribution.
SL 787 – Lighting System
Page 127
The lighting system SL 787 is characterised by a clear and straight shape language.
Reduced to its necessities – and nevertheless versatile - as recessed, surface
mounted or pendant luminaire system. A variety of profiles and different high-
quality optics give you the possibility of realising a uniform lighting concept in the
whole building. Single luminaires or continuous mounted rows following the room
structures offer you manifold design possibilities.
In autumn 2010 also with LED and Seamless gear trays available!
nEWS
Trimless profile Profile with frame Profile with shadow gap Profile with shadow gap – semi-recessed
01_Inhalt.indd 12 28.05.2010 18:16:20 Uhr
13
spittler
AS 23 LED
page 178 KR 23 LED
page 202
EB 01 - Accent Downlight
page 154
The recessed downlight EB01
provides a different application of
brightness at the right places creates an
atmosphere serving as orientation.
ECO - Recessed Downlights
page 256
SPITTLER’s answer to the environmental and climate protection
discussion. Specific developed recessed downlights for the new
compact fluorescent lamps 14 & 17 Watt.
LED - Recessed DownlightsBasing on the established SPITTLER downlight system we have
integrated the advantages of the LED technology. LED downlights
from SPITTLER will be characterised by innovative and efficient
lighting technique combined with a long durability.
Available by autumn 2010!
An intelligent LED-technique, the highest energy efficiency as well as modern design complement
each other in the track light AS 23 LED and gimbal recessed luminaire KR 23 LED. There is a choice
of a power-spectrum of 33, 42 or 50 W, different beam angle (spot 2 x 8°, medium 2 x 12°,
flood 2 x 16° und wideflood 2 x 27°) as well as light colours 2.700 K, 3.000 K, 4.000 K and 6.000K.
EB 02 - Day & Night Downlight
page 156
Beside the brightness, the light colour is also a relevant factor. Whilst
by day, higher illumination levels in neutral white are perceived as
comfortable, by night warm white shades provide for a relaxed
atmosphere. The day & night downlight was especially developed for this
application. If there were used 2 HIT-CE lamps, one in warm white and the
other in neutral white, they can be switched separately.
01_Inhalt.indd 13 14.06.2010 9:27:14 Uhr
14
PERFORMAnCE In LIGhTInG
PERFORMANCE IN LIGHTING: LIGHTING FROM ONE SOURCE
PERFORMAnCE In LIGhTInG SpA is a family-run group of companies from Verony in Italy uniting 5 brands under one roof: SPITTLER®, PRISMA ARChITECTURAL®, SBP URBAn LIGhTInG®, PRISMA® und SBP®. hence, with PERFORMAnCE In LIGhTInG expertise, technical competence and experience complement each other, not only to secure competitiveness on international markets but to raise it sustainably as well.
The product portfolio for our customers includes sophisticated light-technical solutions worldwide for the areas: •technicalanddecorativeinteriorluminaires •urbanlighting •technicalanddecorativeoutdoorluminaires.
PERFORMAnCE In LIGhTInG is represented in more than 90 countries all over the world enabling the company to act on the highest level of the lighting market and to guarantee a broad variety of esthetical and technical solutions. Convince yourself of our high performance!
THE DISTRIBUTION NETWORK
Performance in Lighting has a sales and distribution network operating all over the world with branches, subsidiaries and agents. In addition to the important and successful presence on the markets of Germany, Italy, France, the USA and Belgium, where its
production subsidiaries operate, the company group is exporting its products in more than 90 countries worldwide. The subsidiaries in holland, Spain, Portugal, Great Britain, Finland and China are actively promoting and selling the products in their countries.
01_Inhalt.indd 14 28.05.2010 18:16:32 Uhr
15
SPITTLER Lichttechnik Gmbh is within the group PERFORMAnCE In LIGhTInG SpA an independent, medium-sized company in Goslar at the harz moun-tains in Germany. Since 1990, we have successfully been developing, producing and launching technical interior lighting products. SPITTLER‘s production range stands out for its high energy efficiency, the employment of latest technology, technical perfection and a straight-lined, contemporary design. Therewith we don‘t only offer professional lighting concepts for every kind of application, but we also create a unique
customer value by our individual solutions and qualified consulting services. Our professionallighting concepts are carefully tailored to economic light solutions for office and administration, educational institutions, retail environment, customised solutions as well as general lighting.
01_Inhalt.indd 15 28.05.2010 18:16:33 Uhr
16
Prisma Architectural is a collection of design-led outdoor lighting products with innovative features and designs, manufactured from high quality materials they offer a comprehensive range of wall and ceiling mounted luminaires, pole mounted lighting, and in-ground recessed lighting.
01_Inhalt.indd 16 28.05.2010 18:16:35 Uhr
17
SBP Urban Lighting is a range of luminairesdesigned for road and public area lighting.A wide range of optics and lamps are offered, combined with latest technology in photometric design, to comply with the recommendations for glare control and upward light pollution. Suitable for a variety of public area lighting applications; sports stadiums, road / street lighting and path-ways, car parks, squares and pedestrian zones.
01_Inhalt.indd 17 28.05.2010 18:16:36 Uhr
18
Prisma offers a comprehensive range of indoor and outdoor lighting for commercial and residential applications; providing a family range of products for surface, suspended and pole mounting installation. The Prisma range combines quality materials with aesthetic designs to offer a competitive priced solution to lighting.
01_Inhalt.indd 18 28.05.2010 18:16:38 Uhr
19
SBP are known for their technical high performance lighting with a reputation for quality standards and assurance in the field of sports applications, public area lighting, interior / exterior industrial lighting and architectural accent lighting.
01_Inhalt.indd 19 28.05.2010 18:16:39 Uhr
20
PERFORMAnCE In LIGhTInG
WARRANTY
Warranty of 5 years is granted on all products under the condition that they are used and maintained in accordance with the instruc-tions. Consumables like e. g. third-party buyout components, lamps, starters as well as ingnitors and electronic ballast correspon-ding to the warranty regulations as per the responsible European standard, are excluded from warranty.
PLANNING BASICS
DEVELOPMENT, DESIGN AND TECHNICAL KNOW-HOW
PERFORMAnCE In LIGhTInG and SPITTLER doesn‘t only pool production know-how and long-time experience in the strategic sectors like research and development, construction and marketing, we additionally use the most sophisticated CAD-programs, compatible with all phases of develop-ment. herewith, a targeted planning of every luminaire can be realised. 3D-models allow an exact judging of form and design processed up to the last construction detail. The subsequent testing on effici-ent light technique, reliability and durability of the luminaire is done in SPITTLER‘s and PERFORMAnCE In LIGhTInG‘s accredited own light laboratories. They involve light labora-tories with goniophotometres as well as humidity and dust laboratories for IP-tests. Moreover, the laboratories are working with a quality manage-ment corresponding to the require-ments and regulations of ISO 17025.
Therewith, PERFORMAnCE In LIGh-TInG and SPITTLER havew the decisive advantage to fulfil all technical re-quire-ments which are necessary for issuing European certifications. By the interplay of these procedural steps reliable luminaires are produced pre-senting optimal construction solutions with the best light engineering, easy to install and competitive in every respect.
Photometric luminaire dataPERFORMAnCE In LIGhTInG and SPITTLER attaches great importance on highest light quality. All luminaires are exactly measured in our own photometric labora-tories and all luminaire data for light plannings can be determined as per DIn En 12465-1. With these photo-metric luminaire data professional light plannings can be established simply and quickly, for example with the help of the planning programs Dialux and Relux. The computerized light planning includes the possibility of establishing 3D-visualisations, illustrated documents and cost estimate. For Dialux (www.dial.com) SPITTLER provides a plug-in. For Relux (www.relux.biz) all light-technical data of the SPITTLER lumaires will shortly be available on the „Relux site“.
01_Inhalt.indd 20 28.05.2010 18:16:41 Uhr
21
PLANNING BASICS
All products comply with the Eu-ropean RohS-regulation 2002/95/EG and therefore don’t contain any dangerous materials or metals. Every luminaire is designed in a way that the different materials can easily be separated after break-down of their function, therefore 98% is recyclable.
PERFORMAnCE In LIGhTInG and SPITTLER print their catalogues exclusively on paper from properly managed forests and specially grown trees.
Energy Efficiency Export InitiativeThe Energy Efficiency Export Initiative is a program of the German Federal Govern-ment under the lead responsibility of the Federal Ministry of Economics. The label “Energy efficiency made in Germany”is a sign for German Industries and their expertise in the field of energy efficiency. It stands for innovative products,technologies and services. SPITTLER is a registered member of this initiative. www.efficiency-from-germany.info
01_Inhalt.indd 21 28.05.2010 18:16:41 Uhr
22
ph
oto
: Ale
ssan
dra
Gar
usi
fo
r C
InI (
Ko
lkat
a -
Ind
ia)
Fondazione Blu - ONLUSVia San Michele alla Porta, 5 37121 Verona (Italy) Tel +39 045 59 71 44 Fax +39 045 61 59 279 e-mail [email protected] www.fondazione-blu.org
01_Inhalt.indd 22 28.05.2010 18:16:42 Uhr
23
web www.fondazione-blu.org
The well being of children and their working parents is one of the main reasons behind Fondazione Blu, and the inspiration for the creation of Nido Blu by Performance in Lighting, a day care centre open since September 2002 at one of the main offices of the company in the province of Verona. This centre is designed to accommo-date children aged 7 to 36 months, the sons and daughters of employees of companies in the area, and provide them with a socio-pedagogical program approved by the Veneto Region. Nido Blu is self-managed by a cooperative,
made up of personnel specialised in the care and education of small children. Connected with the Nido Blu there is the Fattoria Didattica (Learning Farm), an or-ganisation where several pairs of different species of animals are cared for, with the goal of ac-quainting children with nature at a very young age, in a spontaneous and direct way just like on a real farm.
NIDO BLU
PeRFoRmaNCe iN LighTiNg is a supporter of Fondazione Blu, an association founded with goal of guaranteeing the right to care and education in early childhood to children living in the poorest areas of the planet. Contributions to the Foundation make up the basis for the long term financing of its projects. Funds raised go into the invested capital, from which interest is made that goes toward financing and supporting initiatives for as long as the foundation lasts and develops. Fondazione Blu is dedicated, maintains the utmost transparency in its operations, and periodically documents its results. These practices are proof of its commitment to building a solid, sustainable future of large-scale social development.
FONDAZIONE BLU: FOR A FUTURE OF SOCIAL DEVELOPMENT
01_Inhalt.indd 23 29.05.2010 10:29:10 Uhr
24
Goslar
SPITTLER - WE LIGHT UP YOUR IDEAS
Since 1990 SPITTLER‘s philosophy is to guarantee an optium service and to deliver high-quality products “Made in Germany” to every customer. Due to our high vertical integration we are able to answer the market requirements very quickly and with extreme flexibility in development and production. We pride ourselves with a reputation to find the right solutions for every client mutually to realise his individual ideas.
Since October 2009 we are a member of the group PERFORMAnCE In LIGhTInG SpA. hence, within the group the whole luminaire package for technical and decorative indoor and outdoor lighting can be offered and developed, produ-ced and sold even more efficiently.
01_Inhalt.indd 24 28.05.2010 18:16:49 Uhr
25
MADE IN GERMANYHigh Vertical Integration as Locational Advantage
A motivated team with experienced know-how, modern machinery and the latest production technology directly connected with the SPITTLER premises in Goslar do not only secure for our customers the high quality standard “Made in Germany” but also a quick availability of the products.
The permanent consideration of scientific findings, innovative technologies and the early reaction on market trends enable SPITTLER to react quickly and flexibly on customers’ requests.
01_Inhalt.indd 25 28.05.2010 18:16:54 Uhr
26
PERFORMAnCE In LIGhTInG
OFFICE AND ADMINISTRATION LIGHTINGMotivation and Individuality
Modern communication systems and flexible interior room designs are consistently changing the working environment in offices. SPITTLER analyses up-to-date trends in office and adminis-tration and transfers therefrom the requirements for development of your luminaires. This is how the latest scientific findings about the effects of light on human beeing enter into our luminaire development and light planning.
SPITTLER office luminaires have a system charac-ter, are flexible and can be adjusted individually to the respective light requests of the customer.
01_Inhalt.indd 26 28.05.2010 18:17:06 Uhr
27
SPITTLER
LIGHTING FOR EDUCATIONAL INSTITUTIONSLighting solutions for bright minds
Light does not only lift our spirits and sustain our joy of life but it increases as well our eagerness to learn. In the area of education the right lighting is therefore a decisive factor for success. Our SPITTLER light experts stand for the development and realisation of these intelligent lighting concepts. Because further to the quality of illumination, the room function, daylight
incidence and light control are decisive factors of success at SPITTLER‘s in order to realise a perfect light solution for the customer. SPITTLER stands for more light quality, to help support concentration and for a comfortable learning atmosphere.
01_Inhalt.indd 27 28.05.2010 18:17:30 Uhr
28
PERFORMAnCE In LIGhTInG
RETAIL LIGHTING Presentation of Goods and World of Experience
The light in sales rooms has a decisive influ-ence on the ambience and thus on the sales success. hence, modern sales room illumina-tion is perfectioned by a harmonic interplay between basic lighting, accent lightling and information ligthing.
SPITTLER luminaires exactly set these accents by their flexible lighting systems for all kinds of mounting and make shopping a special event for your customers.
The goods are „put in perspective“ by SPITTLER, an atmosphere of wellness and worlds of experi-ence are created. We accept every challenge and elaborate made-to-measure solutions for you.
01_Inhalt.indd 28 28.05.2010 18:17:39 Uhr
29
SPITTLER
LIGHTING FOR SPECIAL SOLUTIONSCreative, Individual Lighting Concepts
Architectural variety and individuality require special lighting solutions. Right from the planning stage SPITTLER help the customer to adjust his design ideas to the constructional realities. Every step of development is taken after close consultation with the customer, the lighting specialist and the architect.
Low-ceilinged recess depths, ceiling joists or concrete ceilings, eye catching designs or high performance materials – everything is possible. SPITTLER redefines every object and creates individual solutions for your ideas.
01_Inhalt.indd 29 28.05.2010 18:17:57 Uhr
30
02_buero_inhalt.indd 3002_buero_inhalt.indd 30 28.05.2010 17:49:51 Uhr28.05.2010 17:49:51 Uhr
31
NEW
NEW
NEW
SL 730 SL 624
SL 740
SL 782 SL 650
SL 650 XF
SL 790 SL 73
MODE LUM
SL 787
Office and Administration Lighting
Office and Administration Lighting
34 Pendant luminaires
108 Pendant luminaires for continuous mounting
76 Free-standing luminaires
86 Surface mounted luminaires
58 Pendant luminaires
112 Pendant luminaires for continuous mounting
80 Free-standing luminaires
94 Surface mounted luminaires
40 Pendant luminaires
78 Free-standing luminaires
88 Surface mounted luminaires
102 Recessed luminaires
46 Pendant luminaires 64 Pendant luminaires
116 Pendant luminaires for continuous mounting
96 Surface mounted luminaires
120 Surface mounted luminaires for continuous mounting
104 Recessed luminaires
124 Continuous mounted recessed luminaires
52 Pendant luminaires
90 Surface mounted luminaires
127 Lighting system
106 Recessed luminaires
100 Recessed luminaires
139 Lighting system
70 Pendant luminaires
84 Free-standing luminaires
72 Pendant luminaires
SL 640 (for fi reproof ceilings)
Off
ice
and
Ad
min
istr
atio
n L
igh
tin
g
02_buero_inhalt.indd 3102_buero_inhalt.indd 31 28.05.2010 17:49:53 Uhr28.05.2010 17:49:53 Uhr
32
SL 624 SL 730
www.spittler.com
... The Sun As Ideal
The sun is a dynamic body. Its properties can best be
emulated by the daylight cube which is defined by the
three elements, illuminance, colour of light and direction.
All three parameters change constantly. These dynamic
properties are our incentive for creating a new generati-
on of luminaires: SL 624 and SL 730
These luminaires are ultra-flat and compact
fluorescent long-field luminaires that can also be
arranged as a continuous lighting system.
Suitable free-standing and surface-mounted
luminaires complete the range.
The triple lamp design allows us to represent at least 2
parameters of the sun’s dynamism: the illuminance level
and the light colour.
The arrangement of lamps makes it possible to generate
a high illuminance on the ceiling and to use two different
lamp colours simultaneously. This arrangement generates
ambient illuminance which varies in colour (warm-white
and neutral-white) and intensity with the changing light
of the day and at the same time constant natural task
illuminance. The dynamism is not an obstacle anymore as
both sources of light are separately dimmable. Single and
twin lamp designs are offered additionally.
If there is a definition about dynamic light it should
be SL 624 and SL 730.
Warm white Warm white
Daylight
Daylight
Illuminance
Light direction
Colour of light
02_buero_inhalt.indd 3202_buero_inhalt.indd 32 28.05.2010 17:49:54 Uhr28.05.2010 17:49:54 Uhr
33
Office and Administration Lighting
Sensor Control
Daylight control with PIR devices gives lighting control, offering
energy conservation without compromising on illuminance or
comfort.
An optional infra-red remote is available to vary the illuminance
and independently control each luminaire. This technology can
be integrated within every luminaire of our product range on
demand.
Radio Control
The enocean® radio receiver is an additional accessory available in
two versions:
To switch the luminaire on and off or to dim it with digital dim-
mable electronic ballast.
The radio senders optionally available can be allocated to one
or several luminaires by simple programming. The radio senders
draw their energy via keystroke without any batteries (motion
energy harvesting).
MIRO® and MIRO-SILVER®
SPITTLER always uses the highest quality technical materials in all
applications for the manufacture of their louvres and reflectors to
achieve energy efficient lighting.
Our standard high-brilliance louvres are made from MIRO® coated
pure aluminium, with a total reflection of 93- 95% this material
increases the luminaires efficiency by up to 20% compared to
anodised aluminium.
During the course of developing new light technological solutions
SPITTLER incorporated the use of innovative silver-processed
mirror louvres MIRO-SILVER® in selected products.
This highly reflective surface has an impressive total reflection of
98% with excellent colour neutrality. New computer calculated
louvre geometrics provide operation degrees of efficiency with
more than 90% and hence offer a glare-free and interference-
free illumination comfort.
Our conclusion: the luminiare power can be reduced and energy
can be saved. For the sake of the environment.
Off
ice
and
Ad
min
istr
atio
n L
igh
tin
g
02_buero_inhalt.indd 3302_buero_inhalt.indd 33 28.05.2010 17:49:55 Uhr28.05.2010 17:49:55 Uhr
www.spittler.com34
SL 730 Pendant luminaire for T5 lamps
- Housing made of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated in RAL 9006, RAL 9016 or graphite (DB 703) all with structure
- Double parabolic louvre, micro prism diffuser
- VDU application suitable acc. to European Standards EN 12464-1
- Double parabolic louvre made of high-polished, metalised pure aluminium (Al 99.98)
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Compatible free-standing and surface mounted luminaire
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:3403_buero_produkte_eng.indd Abs1:34 28.05.2010 16:28:52 Uhr28.05.2010 16:28:52 Uhr
35
Office and Administration Lighting
SL 730 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated. Double parabolic louvre made of high-polished metalised
pure aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and transparent mains
supply. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 730.481.54.3-18 730.481.54.6-18 1210 x 223 x 32 mm G5
T5 1 x 35 / 49 / 80 W 730.481.80.3-18 730.481.80.6-18 1510 x 223 x 32 mm G5
T5 3 x 28 / 54 W 730.483.54.3-18 730.483.54.6-18 1210 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.483.49.3-18 730.483.49.6-18 1510 x 223 x 32 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
223
32
1210 /1510
1185 /1485
120120120120120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 55 / 45 %
UGR 16,3 / 15,9
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 94 %
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 54 W indirect / direct 80 / 20 % UGR 11,3 / 11,6 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 85 %
Attachments (Please order separately!)
Special colour 730.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast*/** MP730-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP730-ES
Receiver enocean® for dimmable ballast* MP730-ED
Remote control enocean® for receiver (without battery) FFB-E
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface** Extension of the luminaire about 50 mm
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:3503_buero_produkte_eng.indd Abs1:35 28.05.2010 16:28:55 Uhr28.05.2010 16:28:55 Uhr
www.spittler.com36
SL 730 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated. Double parabolic louvre made of high-polished metalised
pure aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and transparent
mains supply. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 730.482.54.3-18 730.482.54.6-18 1210 x 223 x 32 mm G5
T5 2 x 35 / 49 W 730.482.49.3-18 1510 x 223 x 32 mm G5
T5 2 x 35 / 49 / 80 W 730.482.80.3-18 730.482.80.6-18 1510 x 223 x 32 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
223
32
1210 /1510
1185 /1485
120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,4 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 55 / 45 % UGR 16,7 / 17,0 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 87 %
Attachments (Please order separately!)
Special colour 730.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast*/** MP730-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP730-ES
Receiver enocean® for dimmable ballast* MP730-ED
Remote control enocean® for receiver (without battery) FFB-E
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface** Extension of the luminaire about 50 mm
03_buero_produkte_eng.indd Abs1:3603_buero_produkte_eng.indd Abs1:36 28.05.2010 16:28:57 Uhr28.05.2010 16:28:57 Uhr
37
Office and Administration Lighting
SL 730 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for direct/indirect lighting for T5 lamps.
Housing made of extruded aluminium profile, end caps made of die-cast aluminium,
powder-coated. Incl. steel wire suspension (1.5 m) and transparent mains supply.
VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 730.461.54.3-18 730.461.54.6-18 1210 x 223 x 32 mm G5
T5 1 x 35 / 49 / 80 W 730.461.80.3-18 730.461.80.6-18 1510 x 223 x 32 mm G5
T5 2 x 28 / 54 W 730.462.54.3-18 730.462.54.6-18 1210 x 223 x 32 mm G5
T5 2 x 35 / 49 W 730.462.49.3-18 1510 x 223 x 32 mm G5
T5 2 x 35 / 49 / 80 W 730.462.80.3-18 730.462.80.6-18 1510 x 223 x 32 mm G5
T5 3 x 28 / 54 W 730.463.54.3-18 730.463.54.6-18 1210 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.463.49.3-18 730.463.49.6-18 1510 x 223 x 32 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
223
32
1210 /1510
1185 /1485
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 2 x 54 W
indirect / direct 90 / 10 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 75 %
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 54 W indirect / direct 90 / 10 % UGR - Critical radiation angle/1000 cd/m² 65 ° Light output ratio 74 %
Attachments (Please order separately!)
Special colour 730.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast*/** MP730-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP730-ES
Receiver enocean® for dimmable ballast* MP730-ED
Remote control enocean® for receiver (without battery) FFB-E
Top cover for 54 Watt 730.9912-2
Top cover for 80 Watt 730.9915-2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface** Extension of the luminaire about 50 mm
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:3703_buero_produkte_eng.indd Abs1:37 28.05.2010 16:28:58 Uhr28.05.2010 16:28:58 Uhr
www.spittler.com38
SL 730 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for direct/indirect lighting for T5 lamps.
Housing made of extruded aluminium profile, end caps made of die-cast aluminium,
powder-coated. Incl. steel wire suspension (1.5 m) and transparent mains supply.
VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 730.433.54.3-18 730.433.54.6-18 1210 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.433.49.3-18 730.433.49.6-18 1510 x 223 x 32 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
223
32
1210 /1510
1185 /1485
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 54 W
indirect / direct 95 / 5 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 77 %
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 49 W indirect / direct 95 / 5 % UGR - Critical radiation angle/1000 cd/m² 65 ° Light output ratio 71 %
Attachments (Please order separately!)
Special colour 730.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast*/** MP730-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP730-ES
Receiver enocean® for dimmable ballast* MP730-ED
Remote control enocean® for receiver (without battery) FFB-E
Top cover for 54 Watt 730.9912
Top cover for 80 Watt 730.9915
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface** Extension of the luminaire about 50 mm
03_buero_produkte_eng.indd Abs1:3803_buero_produkte_eng.indd Abs1:38 28.05.2010 16:29:00 Uhr28.05.2010 16:29:00 Uhr
39
Office and Administration Lighting
03_buero_produkte_eng.indd Abs1:3903_buero_produkte_eng.indd Abs1:39 28.05.2010 16:29:02 Uhr28.05.2010 16:29:02 Uhr
www.spittler.com40
SL 740 Pendant luminaire for T5 lamps
- Housing made of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated in RAL 9006 with structure.
- Double parabolic louvre, micro prism or white PMMA diffuser
- Micro prism diffuser with two lamps: VDU application suitable acc. to European Standards EN 12464-1
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Compatible pendant, surface mounted and wall luminaire
03_buero_produkte_eng.indd Abs1:4003_buero_produkte_eng.indd Abs1:40 28.05.2010 16:29:05 Uhr28.05.2010 16:29:05 Uhr
41
Office and Administration Lighting
SL 740 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated in RAL 9006 with structure. Double parabolic louvre
made of high-polished, metalised pure aluminium (Al 99.98). Incl. steel wire
suspension (1.5 m) and transparent mains supply. VDU application suitable
according to European Standards EN 12464-1. Max. weight: 4,5 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 740.482.54.3 740.482.54.6 1204 x 154 x 40 mm G5
T5 2 x 35 / 49 W 740.482.49.3 1504 x 154 x 40 mm G5
T5 2 x 35 / 49 / 80 W 740.482.80.3 740.482.80.6 1504 x 154 x 40 mm G5
154
40
1204 / 1504
1185 / 1485
120120120120120
180180180180180
300 cd/klm
120°120120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°6060°60°60°
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,4 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
120120120120120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 55 / 45 % UGR 16,7 / 17,0 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 87 %
Attachments (Please order separately!)
Emergency light kit 1h 740.0901
Emergency light kit 3h 740.0900
Special colour 740.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:4103_buero_produkte_eng.indd Abs1:41 28.05.2010 16:29:09 Uhr28.05.2010 16:29:09 Uhr
www.spittler.com42
Pendant luminaire with micro prism diffuser for indirect and diffuse-direct lighting for
T5 lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated in RAL 9006 with structure. Two lamps version covered
from above. Incl. steel wire suspension (1.5 m) and transparent mains supply. VDU
application suitable acc. to European Standards EN 12464-1 (only with two lamps).
Max. weight: 6,5 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 740.462.54.3 740.462.54.6 1205 x 250 x 40 mm G5
T5 2 x 35 / 49 W 740.462.49.3 1505 x 250 x 40 mm G5
T5 2 x 35 / 49 / 80 W 740.462.80.3 740.462.80.6 1505 x 250 x 40 mm G5
T5 4 x 28 / 54 W 740.464.54.3 740.464.54.6 1205 x 250 x 40 mm G5
T5 4 x 35 / 49 W 740.464.49.3 740.464.49.6 1505 x 250 x 40 mm G5
250
40
1205 / 1505
1185 / 1485
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 2 x 54 W
indirect / direct 80 / 20 %
UGR 6,3 / 10,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 86 %
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 2 x 80 W indirect / direct 80 / 20 % UGR 6,2 / 10,2 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 82 %
Attachments (Please order separately!)
Emergency light kit 1h (only for 2 lamps) 740.0901
Emergency light kit 3h (only for 2 lamps) 740.0900
Special colour 740.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
SL 740 Pendant luminaire with micro prism diffuser
03_buero_produkte_eng.indd Abs1:4203_buero_produkte_eng.indd Abs1:42 28.05.2010 16:29:12 Uhr28.05.2010 16:29:12 Uhr
43
Office and Administration Lighting
SL 740 Pendant luminaire with frosted acrylic diffuser
Pendant luminaire with frosted acrylic diffuser for indirect and diffuse-direct lighting
for T5 lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated in RAL 9006 with structure. Two lamps version covered
from above. Incl. steel wire suspension (1.5 m) and transparent mains supply.
Max. weight: 6,5 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 740.492.54.3 740.492.54.6 1205 x 250 x 40 mm G5
T5 2 x 35 / 49 W 740.492.49.3 1505 x 250 x 40 mm G5
T5 2 x 35 / 49 / 80 W 740.492.80.3 740.492.80.6 1505 x 250 x 40 mm G5
T5 4 x 28 / 54 W 740.494.54.3 740.494.54.6 1205 x 250 x 40 mm G5
T5 4 x 35 / 49 W 740.494.49.3 740.494.49.6 1505 x 250 x 40 mm G5
250
40
1205 / 1505
1185 / 1485
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,8 / 13,9
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 81 %
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 55 / 45 % UGR 15,2 / 14,3 Critical radiation angle/1000 cd/m² 90 ° Light output ratio 91 %
Attachments (Please order separately!)
Emergency light kit 1h (only for 2 lamps) 740.0901
Emergency light kit 3h (only for 2 lamps) 740.0900
Special colour 740.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:4303_buero_produkte_eng.indd Abs1:43 28.05.2010 16:29:14 Uhr28.05.2010 16:29:14 Uhr
www.spittler.com44
Zentrale von TECNOSTUDIO in Mestrino, Italy (photo by Germano Borelli)
03_buero_produkte_eng.indd Abs1:4403_buero_produkte_eng.indd Abs1:44 28.05.2010 16:29:17 Uhr28.05.2010 16:29:17 Uhr
45
Office and Administration Lighting
Hauptschule Hallbergmoos, Germany
03_buero_produkte_eng.indd Abs1:4503_buero_produkte_eng.indd Abs1:45 28.05.2010 16:30:01 Uhr28.05.2010 16:30:01 Uhr
www.spittler.com46
SL 782 Pendant luminaire for T5 lamps
- Housing made of extruded aluminium profile, surface EV1 (anodised); die-cast aluminium end caps powder-coataed in anodically exidisec shade
- Double parabolic louvre, micro prism diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- Direct / indirect light distribution with mainly direct light portion
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Luminaire also powder-coated in RAL 9006 with structure or in RAL 9016 with structure available
03_buero_produkte_eng.indd Abs1:4603_buero_produkte_eng.indd Abs1:46 28.05.2010 16:30:04 Uhr28.05.2010 16:30:04 Uhr
47
Office and Administration Lighting
SL 782 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of anodised extruded aluminium profile, die-cast aluminium
end caps powder-coated in anodically exidisec shade. Double parabolic louvre made
of high-polished metalised pure aluminium (Al 99.98). Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the
profile. VDU application suitable according to European Standards EN 12464-1.
Max. weight: 3,5 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 782.482.54.3-24 782.482.54.6-24 1200 x 90 x 80 mm G5
T5 2 x 35 / 49 W 782.482.49.3-24 1500 x 90 x 80 mm G5
T5 2 x 35 / 49 / 80 W 782.482.80.3-24 782.482.80.6-24 1500 x 90 x 80 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-24“, if you require the luminaire in RAL 9006 structure please use „-18“. Any other RAL colour „-9“.
90
80
1200 / 1500
100100100100100
150150150150150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 30 / 70 %
UGR 17,8 / 18,5
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 64 %
120120120120120
180180180180180
300 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 40 / 60 % UGR 17,5 / 16,2 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 69 %
Attachments (Please order separately!)
Special colour 782.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:4703_buero_produkte_eng.indd Abs1:47 28.05.2010 16:30:06 Uhr28.05.2010 16:30:06 Uhr
www.spittler.com48
SL 782 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for diffuse-direct and indirect lighting for
T5 lamps. Housing made of anodised extruded aluminium profile, die-cast aluminium
end caps powder-coated in anodically exidisec shade. Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the profile.
Max. weight: 3,7 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 782.462.54.3-24 782.462.54.6-24 1200 x 90 x 80 mm G5
T5 2 x 35 / 49 W 782.462.49.3-24 1500 x 90 x 80 mm G5
T5 2 x 35 / 49 / 80 W 782.462.80.3-24 782.462.80.6-24 1500 x 90 x 80 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-24“, if you require the luminaire in RAL 9006 structure please use „-18“. Any other RAL colour „-9“.
90
80
1200 / 1500
8080808080
120120120120120
200 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 20 / 80 %
UGR 21,8 / 19,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 69 %
8080808080
120120120120120
200 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 25 / 75 % UGR 21,7 / 19,4 Critical radiation angle/1000 cd/m² 90 ° Light output ratio 70 %
Attachments (Please order separately!)
Special colour 782.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
03_buero_produkte_eng.indd Abs1:4803_buero_produkte_eng.indd Abs1:48 28.05.2010 16:30:10 Uhr28.05.2010 16:30:10 Uhr
49
Office and Administration Lighting
SL 782 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of anodised extruded aluminium profile, die-cast aluminium
end caps powder-coated in anodically exidisec shade. Double parabolic louvre made
of high-polished metalised pure aluminium (Al 99.98). Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the
profile. VDU application suitable according to European Standards EN 12464-1.
Max. weight: 5,8 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 2 x 28 / 54 W 782.484.54.3-24 782.484.54.6-24 2800 x 90 x 80 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-24“, if you require the luminaire in RAL 9006 structure please use „-18“. Any other RAL colour „-9“.
90
80
2800
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 40 / 60 %
UGR 16,7 / 17,0
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 75 %
Attachments (Please order separately!)
Special colour 782.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:4903_buero_produkte_eng.indd Abs1:49 28.05.2010 16:30:13 Uhr28.05.2010 16:30:13 Uhr
www.spittler.com50
SL 782 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for diffuse-direct and indirect lighting for
T5 lamps. Housing made of anodised extruded aluminium profile, die-cast aluminium
end caps powder-coated in anodically exidisec shade. Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the profile.
Max. weight: 6,4 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 2 x 28 / 54 W 782.464.54.3-24 782.464.54.6-24 2800 x 90 x 80 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-24“, if you require the luminaire in RAL 9006 structure please use „-18“. Any other RAL colour „-9“.
90
80
2800
100100100100100
150150150150150
250 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 40 / 60 %
UGR 20,5 / 17,8
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 78 %
Attachments (Please order separately!)
Special colour 782.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
03_buero_produkte_eng.indd Abs1:5003_buero_produkte_eng.indd Abs1:50 28.05.2010 16:30:16 Uhr28.05.2010 16:30:16 Uhr
51
Office and Administration Lighting
Finanzamtszentrum Aachen, Germany
03_buero_produkte_eng.indd Abs1:5103_buero_produkte_eng.indd Abs1:51 28.05.2010 16:30:19 Uhr28.05.2010 16:30:19 Uhr
www.spittler.com52
SL 787 Pendant luminaire for T5 lamps
- Housing made of extruded aluminium profile, surface EV1 (anodised); die-cast aluminium end caps powder-coataed in anodically exidisec shade
- Light distribution: direct or direct/ indirect
- Double parabolic louvre, wallwasher, micro prism or opal white diffuser
- Double parabolic louvre made of high-brilliant metalised MIRO®-SILVER aluminium (Al 99.98)
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Emergency kit on request
- Compatible surface mounted and recessed luminaire
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:5203_buero_produkte_eng.indd Abs1:52 28.05.2010 16:30:21 Uhr28.05.2010 16:30:21 Uhr
53
Office and Administration Lighting
SL 787 – direct Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct lighting for T5 lamps.
Housing made of extruded anodised aluminium profile. Die-cast aluminium end
caps powder-coated in anodised-silver colour. Double parabolic louvre made of
high-brilliant metalised MIRO®-silver aluminium (Al 99.98) Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the
profile. VDU application suitable according to European Standards EN 12464-1 (except
80 W version). Max. weight: 8,8 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.481.54.3 787.481.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.481.80.3 787.481.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.482.49.3 2978 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.482.54.3 787.482.54.6 2378 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.482.80.3 787.482.80.6 2978 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2378 / 2978
200200200200200
300300300300300
400400400400400
500 cd/klm500 cd/klm500 cd/klm500 cd/klm500 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 54 W
UGR 19
Critical radiation angle/1000 cd/m² 60 °
Light output ratio 86 %
Attachments (Please order separately!)
Special colour 787.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:5303_buero_produkte_eng.indd Abs1:53 28.05.2010 16:30:25 Uhr28.05.2010 16:30:25 Uhr
www.spittler.com54
SL 787 – direct Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism difffuser for direct lighting for T5 lamps.
Housing made of extruded anodised aluminium profile. Die-cast aluminium end
caps powder-coated in anodised-silver colour. Incl. steel wire suspension (1.5 m)
and transparent mains supply. Wire suspension adjustable inside of the profile.
Max. weight: 9,9 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.461.54.3 787.461.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.461.80.3 787.461.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.462.49.3 2860 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.462.54.3 787.462.54.6 2260 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.462.80.3 787.462.80.6 2860 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2260 / 2860
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 54 W
UGR 17,5 / 17,5
Critical radiation angle/1000 cd/m² 85 °
Light output ratio 62 %
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 80 W UGR 18,0 / 18,0 Critical radiation angle/1000 cd/m² 85 ° Light output ratio 62 %
Attachments (Please order separately!)
Special colour 787.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
03_buero_produkte_eng.indd Abs1:5403_buero_produkte_eng.indd Abs1:54 28.05.2010 16:30:28 Uhr28.05.2010 16:30:28 Uhr
55
Office and Administration Lighting
SL 787 Pendant luminaire with asymmetrical reflector - wallwasher
Pendant luminaire with asymmetrical direct light distribution for T5 lamps.
Housing made of extruded anodised aluminium profile. Die-cast aluminium end
caps powder-coated in anodised-silver colour. Asymmetrical reflector made of
matt anodised pure aluminium (AL 99,98). Wire suspension adjustable inside of
he profile. Incl. steel wire suspension (1.5 m) and transparent mains supply.
Max. weight: 8,5 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.411.54.3 787.411.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.411.80.3 787.411.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.412.49.3 2978 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.412.54.3 787.412.54.6 2378 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.412.80.3 787.412.80.6 2978 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2378 / 2978
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 54 W
Critical radiation angle/1000 cd/m² 85 °
Light output ratio 72 %
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 80 W Critical radiation angle/1000 cd/m² 85 ° Light output ratio 75 %
Attachments (Please order separately!)
Special colour 787.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:5503_buero_produkte_eng.indd Abs1:55 28.05.2010 16:30:31 Uhr28.05.2010 16:30:31 Uhr
www.spittler.com56
SL 787 – direct / indirect Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for T5
lamps. Housing made of extruded anodised aluminium profile. Die-cast aluminium
end caps powder-coated in anodised-silver colour. Double parabolic louvre made of
high-brilliant metalised MIRO®-silver aluminium (Al 99.98) Incl. steel wire suspension
(1.5 m) and transparent mains supply. Wire suspension adjustable inside of the profile.
VDU application suitable according to European Standards EN 12464-1.
Max. weight: 8,5 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 1 x 35 / 49 W 787.882.49.3 2978 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.882.54.3 787.882.54.6 2378 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.882.80.3 787.882.80.6 2978 x 70,5 x 85 mm G5
70,5
85
2378 / 2978
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 90 / 10 %
UGR 20,1 / 20,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 90 %
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W indirect / direct 86 / 14 % UGR 19,7 / 19,7 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 90 %
Attachments (Please order separately!)
Special colour 787.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
03_buero_produkte_eng.indd Abs1:5603_buero_produkte_eng.indd Abs1:56 28.05.2010 16:30:33 Uhr28.05.2010 16:30:33 Uhr
57
Office and Administration Lighting
SL 787 – direct / indirect Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism difffuser for direct/indirect lighting for T5 lamps.
Housing made of extruded anodised aluminium profile. Die-cast aluminium end
caps powder-coated in anodised-silver colour. Incl. steel wire suspension (1.5 m) and
transparent mains supply. Wire suspension adjustable inside of the profile.
Max. weight: 9,6 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 1 x 35 / 49 W 787.862.49.3 2860 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.862.54.3 787.862.54.6 2260 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.862.80.3 787.862.80.6 2860 x 70,5 x 85 mm G5
70,5
85
2260 / 2860
100100100100100
150150150150150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 72 / 28 %
UGR 17,6 / 17,6
Critical radiation angle/1000 cd/m² 85 °
Light output ratio 63 %
100100100100100
150150150150150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 80 W indirect / direct 80 / 20 % UGR 17,0 / 17,0 Critical radiation angle/1000 cd/m² 85 ° Light output ratio 67 %
Attachments (Please order separately!)
Special colour 787.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:5703_buero_produkte_eng.indd Abs1:57 28.05.2010 16:30:34 Uhr28.05.2010 16:30:34 Uhr
www.spittler.com58
SL 624 Pendant luminaire for T5 lamps
- Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated in RAL 9006 structure, RAL 9016 structure or graphite (DB 703 structure)
- Double parabolic louvre, micro prism diffuser
- VDU application suitable acc. to European Standards EN 12464-1
- Double parabolic louvre made of high-polished, metalised pure aluminium (Al 99.98)
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Compatible free-standing and surface mounted luminaire
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:5803_buero_produkte_eng.indd Abs1:58 28.05.2010 16:30:37 Uhr28.05.2010 16:30:37 Uhr
59
Office and Administration Lighting
SL 624 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for
T5 lamps. Housing made of sheet steel, end caps made of die-cast aluminium,
powder-coated. Double parabolic louvre made of high-polished metalised pure
aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and transparent mains
supply. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 5,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 624.482.54.3-18 624.482.54.6-18 1237 x 190 x 38 mm G5
T5 2 x 35 / 49 W 624.482.49.3-18 1537 x 190 x 38 mm G5
T5 2 x 35 / 49 / 80 W 624.482.80.3-18 624.482.80.6-18 1537 x 190 x 38 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
25
1237/1537
1208 /1508
38
120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,4 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
200200200200200
400 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 55 / 45 % UGR 16,7 / 17,0 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 87 %
Attachments (Please order separately!)
Special colour 624.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP624-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:5903_buero_produkte_eng.indd Abs1:59 28.05.2010 16:30:39 Uhr28.05.2010 16:30:39 Uhr
www.spittler.com60
SL 624 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for
T5 lamps. Housing made of sheet steel, end caps made of die-cast aluminium,
powder-coated. Double parabolic louvre made of high-polished metalised pure
aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and transparent mains
supply. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 624.483.54.3-18 624.483.54.6-18 1237 x 190 x 38 mm G5
T5 3 x 35 / 49 W 624.483.49.3-18 624.483.49.6-18 1537 x 190 x 38 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
25
1237/1537
1208 /1508
38
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 54 W
indirect / direct 80 / 20 %
UGR 11,3 / 11,6
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 49 W indirect / direct 80 / 20 % UGR 11,5 / 11,3 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 85 %
Attachments (Please order separately!)
Special colour 624.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP624-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
03_buero_produkte_eng.indd Abs1:6003_buero_produkte_eng.indd Abs1:60 28.05.2010 16:30:42 Uhr28.05.2010 16:30:42 Uhr
61
Office and Administration Lighting
SL 624 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for direct/indirect lighting for T5 lamps.
Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated.
Incl. steel wire suspension (1.5 m) and transparent mains supply. VDU application
suitable acc. to European Standards EN 12464-1. Max. weight: 5,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 624.462.54.3-18 624.462.54.6-18 1237 x 190 x 38 mm G5
T5 2 x 35 / 49 W 624.462.49.3-18 1537 x 190 x 38 mm G5
T5 2 x 35 / 49 / 80 W 624.462.80.3-18 624.462.80.6-18 1537 x 190 x 38 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
25
1237/1537
1208 /1508
38
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 2 x 54 W
indirect / direct 90 / 10 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 74 %
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 2 x 80 W indirect / direct 95 / 5 % UGR - Critical radiation angle/1000 cd/m² 65 ° Light output ratio 72 %
Attachments (Please order separately!)
Special colour 624.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP624-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
Top cover for 54 Watt 624.9912-2
Top cover for 80 Watt 624.9915-2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:6103_buero_produkte_eng.indd Abs1:61 28.05.2010 16:30:44 Uhr28.05.2010 16:30:44 Uhr
www.spittler.com62
SL 624 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for direct/indirect lighting for T5 lamps.
Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated.
Incl. steel wire suspension (1.5 m) and transparent mains supply. VDU application
suitable acc. to European Standards EN 12464-1. Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 624.463.54.3-18 624.463.54.6-18 1237 x 190 x 38 mm G5
T5 3 x 35 / 49 W 624.463.49.3-18 624.463.49.6-18 1537 x 190 x 38 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
25
1237/1537
1208 /1508
38
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 54 W
indirect / direct 95 / 5 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 77 %
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 3 x 80 W indirect / direct 90 / 10 % UGR - Critical radiation angle/1000 cd/m² 65 ° Light output ratio 71 %
Attachments (Please order separately!)
Special colour 624.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP624-8
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
Top cover for 54 Watt 624.9912
Top cover for 80 Watt 624.9915
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
03_buero_produkte_eng.indd Abs1:6203_buero_produkte_eng.indd Abs1:62 28.05.2010 16:30:47 Uhr28.05.2010 16:30:47 Uhr
63
Office and Administration Lighting
EFZN Energieforschungszentrum Niedersachsen in Goslar, Germany
03_buero_produkte_eng.indd Abs1:6303_buero_produkte_eng.indd Abs1:63 28.05.2010 16:30:51 Uhr28.05.2010 16:30:51 Uhr
www.spittler.com64
SL 650 Pendant luminaire for T5 lamps
- Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated in RAL 9006 with structure or in RAL 9016 with structure
- Double parabolic louvre, asymmetrical double parabolic louvre, wall washer, micro prism diffuser or frosted acrylic diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Compatible surface mounted and recessed luminaire
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:6403_buero_produkte_eng.indd Abs1:64 28.05.2010 16:30:54 Uhr28.05.2010 16:30:54 Uhr
65
Office and Administration Lighting
SL 650 Pendant luminaire with double parabolic louvre
Pendant luminaire with double parabolic louvre for direct/indirect lighting for
T5 lamps. Housing made of sheet steel, end caps made of die-cast aluminium,
powder-coated. Double parabolic louvre made of high-polished metalised pure
aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and transparent mains
supply. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.481.54.3-18 650.481.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.481.80.3-18 650.481.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.482.54.3-18 650.482.54.6-18 1236 x 146 x 53 mm G5
T5 2 x 35 / 49 W 650.482.49.3-18 1536 x 146 x 53 mm G5
T5 2 x 35 / 49 / 80 W 650.482.80.3-18 650.482.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
1150 / 1450
120120120120120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 54 W
indirect / direct 50 / 50 %
UGR 18,6 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 86 %
120120120120120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 80 W indirect / direct 50 / 50 % UGR 18,4 / 14,1 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 93 %
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP650-8
Infrared remote control for sensor chip 11810.P2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:6503_buero_produkte_eng.indd Abs1:65 28.05.2010 16:30:58 Uhr28.05.2010 16:30:58 Uhr
www.spittler.com66
SL 650 Pendant luminaire with asymmetrical double parabolic louvre
Pendant luminaire with asymmetrical double parabolic louvre for direct/indirect
lighting for T5 lamps. Housing made of sheet steel, end caps made of die-cast
aluminium, powder-coated. Double parabolic louvre made of high-polished
metalised pure aluminium (Al 99.98). Incl. steel wire suspension (1.5 m) and
transparent mains supply. VDU application suitable acc. to European Standards
EN 12464-1 (excepting asymmetrical light portion). Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.471.54.3-18 650.471.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.471.80.3-18 650.471.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
1150 / 1450
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 35 / 65 %
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 76 % (excepting the asymmetrical light portion)
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 80 W indirect / direct 35 / 65 % Critical radiation angle/1000 cd/m² 65 ° Light output ratio 79 % (excepting the asymmetrical light portion)
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP650-8
Infrared remote control for sensor chip 11810.P2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
03_buero_produkte_eng.indd Abs1:6603_buero_produkte_eng.indd Abs1:66 28.05.2010 16:31:01 Uhr28.05.2010 16:31:01 Uhr
67
Office and Administration Lighting
SL 650 Pendant luminaire with asymmetrical reflector - wallwasher
Pendant luminaire with asymmetrial direct light distribution for T5 lamps. Housing
made of sheet steel, end caps made of die-cast aluminium, powder-coated.
Asymmetrical reflector made of matt anodised pure aluminium . Incl. steel wire
suspension (1.5 m) and transparent mains supply. Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.411.54.3-18 650.411.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.411.80.3-18 650.411.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
1150 / 1450
200200200200200
300300300300300
400400400400400
500 cd/klm500 cd/klm500 cd/klm500 cd/klm500 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 54 W
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 77 %
400400400400400
600 cd/klm600 cd/klm600 cd/klm600 cd/klm600 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 1 x 80 W Critical radiation angle/1000 cd/m² 90 ° Light output ratio 93 %
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP650-8
Infrared remote control for sensor chip 11810.P2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:6703_buero_produkte_eng.indd Abs1:67 28.05.2010 16:31:03 Uhr28.05.2010 16:31:03 Uhr
www.spittler.com68
SL 650 Pendant luminaire with micro prism diffuser
Pendant luminaire with micro prism diffuser for direct/indirect lighting for T5 lamps.
Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated.
Incl. steel wire suspension (1.5 m) and transparent mains supply. VDU application
suitable acc. to European Standards EN 12464-1 (only with one lamp).
Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.461.54.3-18 650.461.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.461.80.3-18 650.461.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.462.54.3-18 650.462.54.6-18 1236 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
1150 / 1450
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 55 / 45 %
UGR 14,5 / 12,2
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 63 %
100100100100100
150150150150150
250 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 80 W indirect / direct 55 / 45 % UGR 8,5 / 12,1 Critical radiation angle/1000 cd/m² 65 ° Light output ratio 74 %
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP650-8
Infrared remote control for sensor chip 11810.P2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
03_buero_produkte_eng.indd Abs1:6803_buero_produkte_eng.indd Abs1:68 28.05.2010 16:31:06 Uhr28.05.2010 16:31:06 Uhr
69
Office and Administration Lighting
SL 650 Pendant luminaire with frosted acrylic diffuser
Pendant luminaire with frosted acrylic diffuser for indirect and diffuse-direct lighting
for T5 lamps. Housing made of sheet steel, end caps made of die-cast aluminium,
powder-coated. Incl. steel wire suspension (1.5 m) and transparent mains supply.
Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.491.54.3-18 650.491.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.491.80.3-18 650.491.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.492.54.3-18 650.492.54.6-18 1236 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
1150 / 1450
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 54 W
indirect / direct 50 / 50 %
UGR 13,1 / 13,1
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 64 %
100100100100100
150150150150150
250 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 1 x 80 W indirect / direct 50 / 50 % UGR 15 / 15 Critical radiation angle/1000 cd/m² 90 ° Light output ratio 83 %
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Sensor chip including daylight control sensor and PIR detector for DALI ballast* MP650-8
Infrared remote control for sensor chip 11810.P2
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
* no external DALI interface
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:6903_buero_produkte_eng.indd Abs1:69 28.05.2010 16:31:08 Uhr28.05.2010 16:31:08 Uhr
www.spittler.com70
SL 73 Pendant luminaire for T5 lamps
- Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated in RAL 9006 with structure or in RAL 9016 with structure
- Square perforated cover
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Compatible free-standing and wall luminaires
03_buero_produkte_eng.indd Abs1:7003_buero_produkte_eng.indd Abs1:70 28.05.2010 16:31:11 Uhr28.05.2010 16:31:11 Uhr
71
Office and Administration Lighting
SL 73 Pendant luminaire with square perforated cover
Pendant luminaire with square perforated cover for indirect and diffuse-direct lighting
for T5 lamps. Housing made of square perforated sheet steel, end caps made of
die-cast aluminium, powder-coated in RAL 9006 structure. Incl. steel wire suspension
(1.5 m) and transparent mains supply. Max. weight: 9,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 4 x 28 / 54 W 73.404.54.3 73.404.54.6 1300 x 385 x 70 mm G5
385
70
1300
1000
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
T5 4 x 54 W
indirect / direct 90 / 10 %
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 80 %
Attachments (Please order separately!)
Emergency light kit 1h 73.0901
Emergency light kit 3h 73.0900
Special colour 73.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:7103_buero_produkte_eng.indd Abs1:71 28.05.2010 16:31:14 Uhr28.05.2010 16:31:14 Uhr
www.spittler.com72
MODE LUM Pendant luminaire for T5 lamps
- Housing made of anodised aluminium profile, powder-coated in matt grey metallic
- Reflector made of anodised aluminium
- Light Optics: clear or frosted glass
- Light distribution: direct or direct/ indirect
- 2 pendant tube suspensions with round ceiling roses
- Housings individually adjustable
- Easy maintenance by removing the two screws lateral and rotating the upper diffuser downwards
- Luminaire and lamps could be switched individually
- Luminaire also available in white on request
design Luca Di Leonardo
03_buero_produkte_eng.indd Abs1:7203_buero_produkte_eng.indd Abs1:72 28.05.2010 16:31:16 Uhr28.05.2010 16:31:16 Uhr
73
Office and Administration Lighting
MODE LUM – direct Pendant luminaire with clear glass cover
Pendant luminaire with clear glass cover for direct lighting for T5 lamps. Housings
are individually adjustable and made of extruded aluminium profile, powder-coated
in matt grey metallic. Incl. two pendant tubes (0,48 m) and round ceiling roses.
Max. weight: 8,2 kg
Version High frequency ballast (HF) Length x width x height Socket type
T5 2 x 39 W 3001915 890 x 350 x 58 mm G5
T5 4 x 39 W 3001935 890 x 350 x 58 mm G5
T5 2 x 54 W 3002165 1190 x 350 x 58 mm G5
T5 4 x 54 W 3002185 1190 x 350 x 58 mm G5
350
115 94632 / 932
58
30
481
890 / 1190
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/kl250 cd/klm
90°9090°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°4545°45°45°
60°6060°60°60°
T5 2 x 54 W
UGR 22,1 / 22,1
Critical radiation angle/1000 cd/m² 85 °
Light output ratio 61 %
8080808080
120120120120120
160160160160160
200 cd/klm200 cd/klm200 cd/klm200 cd/kl200 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
T5 4 x 39 W UGR 22,7 / 22,7 Critical radiation angle/1000 cd/m² 85 ° Light output ratio 49 %
Pen
dan
t lu
min
aire
s
03_buero_produkte_eng.indd Abs1:7303_buero_produkte_eng.indd Abs1:73 28.05.2010 16:31:20 Uhr28.05.2010 16:31:20 Uhr
www.spittler.com74
MODE LUM – direct / indirect Pendant luminaire with frosted glass cover
Pendant luminaire with frosted glass cover for direct and diffuse indirect lighting
with T5 lamps. Housings are individually adjustable and made of extruded aluminium
profile, powder-coated in matt grey metallic. Incl. two pendant tubes (0,48 m) and
round ceiling roses. Max. weight: 7,9 kg
Version High frequency ballast (HF) Length x width x height Socket type
T5 2 x 39 W 3002045 890 x 350 x 58 mm G5
T5 4 x 39 W 3002065 890 x 350 x 58 mm G5
T5 2 x 54 W 3002285 1190 x 350 x 58 mm G5
T5 4 x 54 W 3002305 1190 x 350 x 58 mm G5
350
115 94632 / 932
58
30
481
890 / 1190
100
150
250 cd/klm30°
60°
T5 4 x 39 W
indirect / direct 62 / 38 %
UGR 16,3 / 16,3
Critical radiation angle/1000 cd/m² 85 °
Light output ratio 70 %
100
150
250 cd/klm 30°
60°
T5 4 x 54 W indirect / direct 69 / 31 % UGR 21,5 / 21,5 Critical radiation angle/1000 cd/m² 85 ° Light output ratio 60 %
03_buero_produkte_eng.indd Abs1:7403_buero_produkte_eng.indd Abs1:74 28.05.2010 16:31:22 Uhr28.05.2010 16:31:22 Uhr
75
Office and Administration Lighting
Bayerische Gesellschaft für Wohnungsbau in Bamberg, Germany
03_buero_produkte_eng.indd Abs1:7503_buero_produkte_eng.indd Abs1:75 28.05.2010 16:31:24 Uhr28.05.2010 16:31:24 Uhr
www.spittler.com76
SL 730 Free-standing luminaire for TC-L lamps
- Flat luminaire head and tube made of extruded aluminium profile, compact steel base, powder-coated in RAL 9006 structure
- Micro prism diffuser
- VDU application suitable acc. to European Standards EN 12464-1
- Step switch operates two or four lamps
- Free-standing luminaire c/w mains supply (2.5 m) and CE plug
- Also available with switch installed in tube
- Compatible pendant and surface mounted luminaires
03_buero_produkte_eng.indd Abs1:7603_buero_produkte_eng.indd Abs1:76 28.05.2010 16:31:30 Uhr28.05.2010 16:31:30 Uhr
77
Office and Administration Lighting
SL 730 Free-standing luminaire with micro prism diffuser
Free-standing luminaire with micro prism diffuser for indirect and diffuse-direct
lighting for TC-L lamps. Flat luminaire head and tube made of extruded alumini-
um profile, base made of steel, powder-coated. C/w mains supply (2.5 m) and
CE plug. VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 16,5 kg
1900
645312
380250
40
Surface: RAL 9006 structure
Version TC-L 4 x 55 W Length x width x height Socket type
High frequency ballast (HF) 730.764.55.3-18 645 x 350 x 1965 mm 2G11
Digital dimmable HF ballast with switch-key 730.764.55.5-18 645 x 350 x 1965 mm 2G11
Digital dimmable HF ballast (DALI) with task oriented PIR detector and daylight control
730.764.55.8-18 645 x 350 x 1965 mm 2G11
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
Attachments (Please order separately!)
Special colour 730.0090
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP730-ES
Receiver enocean® for dimmable ballast* MP730-ED
Remote control enocean® for receiver (without battery) FFB-E
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
TC-L 4 x 55 W
indirect / direct 90 / 10 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 68 %
* Not available with sensor chip
Free
-sta
nd
ing
lum
inai
res
03_buero_produkte_eng.indd Abs1:7703_buero_produkte_eng.indd Abs1:77 28.05.2010 16:31:33 Uhr28.05.2010 16:31:33 Uhr
www.spittler.com78
SL 740 Free-standing luminaire for TC-L lamps
- Flat luminaire head with shadow gap and tube made of extruded aluminium profile, compact steel base, powder-coated in RAL 9006 structure
- Micro prism diffuser
- The two lamps version is VDU application suitable acc. to European Standards EN 12464-1
- Step switch operates two or four lamps
- Free-standing luminaire c/w mains supply (2.5 m) and CE plug
- Also available with switch installed in tube
- Compatible pendant, surface mounted and wall luminaire
03_buero_produkte_eng.indd Abs1:7803_buero_produkte_eng.indd Abs1:78 28.05.2010 16:31:35 Uhr28.05.2010 16:31:35 Uhr
79
Office and Administration Lighting
SL 740 Free-standing luminaire with micro prism diffuser
Free-standing luminaire with micro prism diffuser for indirect and diffuse-direct
lighting for TC-L lamps. Luminaire head and tube made of extruded aluminium
profile, base made of steel, powder-coated in RAL 9006 structure. C/w mains
supply (2.5 m) and CE plug. The two lamps version is VDU application suitable
acc. to European Standards EN 12464-1. Max. weight: 24,5 kg
1900
645312
380250
40
Surface: RAL 9006 structure
Version TC-L 4 x 55 W Length x width x height Socket type
High frequency ballast (HF) 740.764.55.3 645 x 312 x 1940 mm 2G11
Digital dimmable HF ballast with switch-key 740.764.55.5 645 x 312 x 1940 mm 2G11
Digital dimmable HF ballast (DALI) with task oriented PIR detector and daylight control
740.764.55.8 645 x 312 x 1940 mm 2G11
Attachments (Please order separately!)
Special colour 740.0090
Anti-glare set for 4 lamps version 740.5784
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP740-ES
Receiver enocean® for dimmable ballast* MP740-ED
Remote control enocean® for receiver (without battery) FFB-E
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
TC-L 4 x 55 W
indirect / direct 80 / 20 %
UGR 8,8 / 12,4
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 68 %
* Not available with sensor chip
Free
-sta
nd
ing
lum
inai
res
03_buero_produkte_eng.indd Abs1:7903_buero_produkte_eng.indd Abs1:79 28.05.2010 16:31:38 Uhr28.05.2010 16:31:38 Uhr
www.spittler.com80
SL 624 Free-standing luminaire for TC-L and T5 lamps
- Flat luminaire head made of sheet steel, extruded aluminium profile tube and compact steel base, powder coated in RAL 9006 structure
- Double parabolic louvre, micro prism diffuser
- Double parabolic louvre made of high-brilliant metalised MIRO®-SILVER aluminium (Al 99.98)
- VDU application suitable acc. to European Standards EN 12464-1
- Step switch operates two or four lamps
- Luminaire c/w mains supply (2.5 m) and CE plug
- Also available with switch installed in tube
- Compatible pendant and surface mounted luminaires
03_buero_produkte_eng.indd Abs1:8003_buero_produkte_eng.indd Abs1:80 28.05.2010 16:31:40 Uhr28.05.2010 16:31:40 Uhr
81
Office and Administration Lighting
SL 624 Free standing luminaire with double parabolic louvre
Free standing luminaire with double parabolic louvre for direct/indirect lighting
for T5 lamps. Flat luminaire head made of sheet steel, extruded aluminium profile
tube and steel base, powder coated. Double parabolic louvre made of high-brilli-
ant metalised MIRO®-silver aluminium (Al 99.98) Incl. mains supply (2,5 m) and
CE plug. VDU application suitable according to European Standards EN 12464-1.
Max. weight: 16,0 kg
1900
660330
400300
35 25
Surface: RAL 9006 structure
Version T5 2 x 24 W Length x width x height Socket type
High frequency ballast (HF) 624.782.24.3-18 660 x 395 x 1935 mm G5
Digital dimmable HF ballast with switch-key 624.782.24.5-18 660 x 395 x 1935 mm G5
Digital dimmable HF ballast (DALI) with task oriented PIR detector and daylight control
624.782.24.8-18 660 x 395 x 1935 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
Attachments (Please order separately!)
Special colour 624.0090
Top cover 624.799.24-10
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
200200200200200
400 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
T5 2 x 24 W
indirect / direct 62 / 38 %
UGR 16,3 / 16,3
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 92 %
* Not available with sensor chip
Free
-sta
nd
ing
lum
inai
res
03_buero_produkte_eng.indd Abs1:8103_buero_produkte_eng.indd Abs1:81 28.05.2010 16:31:41 Uhr28.05.2010 16:31:41 Uhr
www.spittler.com82
SL 624 Free-standing luminaire with micro prism diffuser
Free standing luminaire with micro prism diffuser for direct/indirect lighting for
TC-L lamps. Flat luminaire head made of sheet steel, extruded aluminium profile
tube and steel base, powder coated. Incl. mains supply (2,5 m) and CE plug.
VDU application suitable acc. to European Standards EN 12464-1.
Max. weight: 16,0 kg
1900
660330
400300
35 25
Surface: RAL 9006 structure
Version TC-L 4 x 55 W Length x width x height Socket type
High frequency ballast (HF) 624.764.55.3-18 660 x 330 x 1935 mm 2G11
Digital dimmable HF ballast with switch-key 624.764.55.5-18 660 x 330 x 1935 mm 2G11
Digital dimmable HF ballast (DALI) with task oriented PIR detector and daylight control
624.764.55.8-18 660 x 330 x 1935 mm 2G11
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
Attachments (Please order separately!)
Special colour 624.0090
Infrared remote control for sensor chip 11810.P2
Receiver enocean® for electronic ballast MP624-ES
Receiver enocean® for dimmable ballast* MP624-ED
Remote control enocean® for receiver (without battery) FFB-E
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
TC-L 4 x 55 W
indirect / direct 88 / 12 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 64 %
* Not available with sensor chip
03_buero_produkte_eng.indd Abs1:8203_buero_produkte_eng.indd Abs1:82 28.05.2010 16:31:45 Uhr28.05.2010 16:31:45 Uhr
83
Office and Administration Lighting
Bucerius Law School in Hamburg, Germany
Hauptstelle Volksbank in Karlsruhe, Germany
03_buero_produkte_eng.indd Abs1:8303_buero_produkte_eng.indd Abs1:83 28.05.2010 16:31:45 Uhr28.05.2010 16:31:45 Uhr
www.spittler.com84
SL 73 Free-standing luminaire for TC-L lamps
- Luminaire head made of galvanised sheet steel, tube and base made of steel, powder-coated in RAL 9006 structure
- Square perforated cover
- Step switch to operate two or four lamps
- Free-standing luminaire c/w mains supply (2.5 m) and CE plug
- Also available with switch installed in tube
- Compatible pendant and wall luminaire
03_buero_produkte_eng.indd Abs1:8403_buero_produkte_eng.indd Abs1:84 28.05.2010 16:31:49 Uhr28.05.2010 16:31:49 Uhr
85
Office and Administration Lighting
SL 73 Free-standing luminaire
Free-standing luminaire for indirect and diffuse-direct lighting for TC-L lamps.
Luminaire head made of galvanised sheet steel, tube and base made of steel,
powder-coated in RAL 9006 structure. C/w mains supply (2.5 m) and CE plug.
Max. weight: 13 kg
1900
610395
500350
80
Surface: RAL 9006 structure
Version TC-L 4 x 55 W Length x width x height Socket type
High frequency ballast (HF) 73.704.55.3 610 x 395 x 1980 mm 2G11
Digital dimmable HF ballast with switch-key 73.704.55.5 610 x 395 x 1980 mm 2G11
Digital dimmable HF ballast (DALI) with task oriented PIR detector and daylight control
73.704.55.8 610 x 395 x 1980 mm 2G11
Attachments (Please order separately!)
Special colour 73.0090
Infrared remote control for sensor chip 11810.P2
100100100100100
150150150150150
200200200200200
250 cd/klm
90°9090°90°90°
120°120120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
TC-L 4 x 55 W
indirect / direct 90 / 10 %
UGR 5,7 / 5,0
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 80 %
Free
-sta
nd
ing
lum
inai
res
03_buero_produkte_eng.indd Abs1:8503_buero_produkte_eng.indd Abs1:85 28.05.2010 16:31:51 Uhr28.05.2010 16:31:51 Uhr
www.spittler.com86
SL 730 Surface mounted luminaire for T5 lamps
- Housing made of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated in RAL 9006, RAL 9016 or graphite (DB 703) all with structure
- Double parabolic louvre made of high-polished, metalised pure aluminium (Al 99.98).
- VDU application suitable acc. to European Standards EN 12464-1
- Decorative indirect light portion
- Compatible pendant and free standing luminaire
03_buero_produkte_eng.indd Abs1:8603_buero_produkte_eng.indd Abs1:86 28.05.2010 16:31:53 Uhr28.05.2010 16:31:53 Uhr
87
Office and Administration Lighting
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
SL 730 Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated.
Ceiling adapter module made of sheet steel, white powder-coated. Double parabolic
louvre made of high-polished metalised pure aluminium (Al 99.98). VDU application
suitable acc. to European Standards EN 12464-1. Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 730.681.54.3-18 730.681.54.6-18 1210 x 223 x 60 mm G5
T5 1 x 35 / 49 / 80 W 730.681.80.3-18 730.681.80.6-18 1510 x 223 x 60 mm G5
223
66
1210 / 1510
32
100100100100100
150150150150150
250 cd/kl250 cd/kl250 cd/kl250 cd/kl250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 730.0090
T5 1 x 54 W
UGR 16,8 / 16,6
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 67 %
SL 730 Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated.
Ceiling adapter module made of sheet steel, white powder-coated. Double parabolic
louvre made of high-polished metalised pure aluminium (Al 99.98). VDU application
suitable acc. to European Standards EN 12464-1. Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 730.682.54.3-18 730.682.54.6-18 1210 x 223 x 60 mm G5
T5 2 x 35 / 49 W 730.682.49.3-18 1510 x 223 x 60 mm G5
T5 2 x 35 / 49 / 80 W 730.682.80.3-18 730.682.80.6-18 1510 x 223 x 60 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
223
66
1210 / 1510
32
100100100100100
150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 730.0090
T5 2 x 54 W
UGR 17,3 / 18,2
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 67 %
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd Abs1:8703_buero_produkte_eng.indd Abs1:87 28.05.2010 16:31:55 Uhr28.05.2010 16:31:55 Uhr
www.spittler.com88
SL 740 Surface mounted luminaire for T5 lamps
- Housing made of extruded aluminium profile, end caps made of die-cast aluminium, powder-coated in RAL 9006 with structure
- Surface mounted frame made of sheet steel, powder coated in RAL 9016 structure
- Micro prism or frosted acrylic diffuser
- Unobtrusive ceiling lucency by indirect light portion
- Easy maintenance by flap mechanism
- Compatible pendant, free-standing and wall luminaire
03_buero_produkte_eng.indd Abs1:8803_buero_produkte_eng.indd Abs1:88 28.05.2010 16:31:58 Uhr28.05.2010 16:31:58 Uhr
89
Office and Administration Lighting
SL 740 Surface mounted luminaire with micro prism diffuser
Surface mounted luminaire with micro prism diffuser for diffuse-direct lighting for
T5 lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated in RAL 9006 with structure. Surface mounted frame made
of sheet steel with flap mechanism, powder-coated in RAL 9016 with structure.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 740.662.54.3 740.662.54.6 1200 x 250 x 70 mm G5
T5 2 x 35 / 49 / 80 W 740.662.80.3 740.662.80.6 1500 x 250 x 70 mm G5
250
70
1200 / 1500
8080808080
120120120120120
200 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 740.0901
Emergency light kit 3h 740.0900
Special colour 740.0090 T5 2 x 54 W
indirect / direct 15 / 85 %
UGR 14,0 / 17,5
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 50 %
SL 740 Surface mounted luminaire with frosted acrylic diffuser
Surface mounted luminaire with frosted acrylic diffuser for diffuse-direct lighting for
T5 lamps. Housing made of extruded aluminium profile, end caps made of die-cast
aluminium, powder-coated in RAL 9006 with structure. Surface mounted frame made
of sheet steel with flap mechanism, powder-coated in RAL 9016 with structure.
Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 740.692.54.3 740.692.54.6 1200 x 250 x 70 mm G5
T5 2 x 35 / 49 / 80 W 740.692.80.3 740.692.80.6 1500 x 250 x 70 mm G5
250
70
1200 / 1500
8080808080
120120120120120
200 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 740.0901
Emergency light kit 3h 740.0900
Special colour 740.0090 T5 2 x 54 W
indirect / direct 10 / 90 %
UGR 17,2 / 17,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 44 %
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd Abs1:8903_buero_produkte_eng.indd Abs1:89 28.05.2010 16:32:01 Uhr28.05.2010 16:32:01 Uhr
www.spittler.com90
SL 787 Surface mounted luminaire for T5 lamps
- Housing made of extruded aluminium profile, surface EV1 (anodised); die-cast aluminium end caps powder-coataed in anodically exidisec shade
- Double parabolic louvre, wallwasher or micro prism
- Double parabolic louvre made of high-brilliant metalised MIRO®-SILVER aluminium (Al 99.98)
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- Compatible pendant and recessed luminaires
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:9003_buero_produkte_eng.indd Abs1:90 28.05.2010 16:32:03 Uhr28.05.2010 16:32:03 Uhr
91
Office and Administration Lighting
SL 787Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of extruded anodised aluminium profile. Die-cast aluminium end caps powder-coated
in anodised-silver colour. Double parabolic louvre made of high-brilliant metalised
MIRO®-silver aluminium (Al 99.98) VDU application suitable according to European
Standards EN 12464-1. Max. weight: 8,8 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.681.54.3 787.681.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.681.80.3 787.681.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.682.49.3 2978 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.682.54.3 787.682.54.6 2378 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.682.80.3 787.682.80.6 2978 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2378 / 2978
200200200200200
300300300300300
400400400400400
500 cd/klm500 cd/klm500 cd/klm500 cd/klm500 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 787.0090
T5 1 x 54 W
UGR 21,3 / 21,3
Critical radiation angle/1000 cd/m² 60°
Light output ratio 86%
SL 787Surface mounted luminaire with micro prism diffuser
Surface mounted luminaire with micro prism diffuser. Housing made of extruded anodised
aluminium profile. Die-cast aluminium end caps powder-coated in anodised-silver colour.
Max. weight: 9,9 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.661.54.3 787.661.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.661.80.3 787.661.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.662.49.3 2860 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.662.54.3 787.662.54.6 2260 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.662.80.3 787.662.80.6 2860 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2260 / 2860
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 787.0090
T5 1 x 54 W
UGR 17,5 / 17,5
Critical radiation angle/1000 cd/m² 85°
Light output ratio 42%
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd 91 07.06.2010 18:42:56 Uhr
www.spittler.com92
SL 787Surface mounted luminaire with asymmetrical reflector - wallwasher
Surface mounted luminaire with asymmetrical light distribution for T5 lamps.
Housing made of extruded anodised aluminium profile. Die-cast aluminium end
caps powder-coated in anodised-silver colour. Asymmetrical reflector made of
matt anodised pure aluminium (AL 99,98). Max. weight: 8,8 kg
Surface anodised (EV1)
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 787.611.54.3 787.611.54.6 1192 x 70,5 x 85 mm G5
T5 1 x 35 / 49 / 80 W 787.611.80.3 787.611.80.6 1492 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 W 787.612.49.3 2978 x 70,5 x 85 mm G5
T5 2 x 1 x 28 / 54 W 787.612.54.3 787.612.54.6 2378 x 70,5 x 85 mm G5
T5 2 x 1 x 35 / 49 / 80 W 787.612.80.3 787.612.80.6 2978 x 70,5 x 85 mm G5
70,5
85
1192 / 1492 / 2378 / 2978
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 787.0090
T5 1 x 54 W
Critical radiation angle/1000 cd/m² 85°
Light output ratio 72%
03_buero_produkte_eng.indd 92 07.06.2010 18:43:40 Uhr
93
Office and Administration Lighting
Basler Securitas in Bad Homburg, Germany
Archivraum Hauptschule Hallbergmoos, Germany
03_buero_produkte_eng.indd Abs1:9303_buero_produkte_eng.indd Abs1:93 28.05.2010 16:32:11 Uhr28.05.2010 16:32:11 Uhr
www.spittler.com94
SL 624 Surface mounted luminaire for T5 lamps
- Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated in RAL 9006 structure, RAL 9016 structure or graphite (DB 703 structure)
- Double parabolic louvre made of high-polished, metalised pure aluminium (Al 99.98)
- VDU application suitable acc. to European Standards EN 12464-1
- Decorative indirect light portion
- Compatible pendant and free standing luminaire
03_buero_produkte_eng.indd Abs1:9403_buero_produkte_eng.indd Abs1:94 28.05.2010 16:32:16 Uhr28.05.2010 16:32:16 Uhr
95
Office and Administration Lighting
SL 624 Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of sheet steel, end caps made of die-cast aluminium, powder-coated. Ceiling adapter
module made of sheet steel, white powder-coated. Double parabolic louvre made of
high-polished metalised pure aluminium (Al 99.98). VDU application suitable acc. to
European Standards EN 12464-1. Max. weight: 7,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 624.682.54.3-18 624.682.54.6-18 1238 x 190 x 55 mm G5
T5 2 x 35 / 49 W 624.682.49.3-18 1538 x 190 x 55 mm G5
T5 2 x 35 / 49 / 80 W 624.682.80.3-18 624.682.80.6-18 1538 x 190 x 55 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
59
1238 / 1538
25
100
150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 624.0090
T5 2 x 54 W
UGR 17,3 / 18,2
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 67 %
SL 624 Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of sheet steel, end caps made of die-cast aluminium, powder-coated. Ceiling adapter
module made of sheet steel, white powder-coated. Double parabolic louvre made of
high-polished metalised pure aluminium (Al 99.98). VDU application suitable acc. to
European Standards EN 12464-1. Max. weight: 7,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 624.681.54.3-18 624.681.54.6-18 1238 x 190 x 55 mm G5
T5 1 x 35 / 49 / 80 W 624.681.80.3-18 624.681.80.6-18 1538 x 190 x 55 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in graphite (DB 703 structure) please use „-12“ instead of „-18“. Any other RAL colour „-9“.
190
59
1238 / 1538
25
100100100100100
150
250 cd/klm
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Special colour 624.0090
T5 1 x 54 W
UGR 16,8 / 16,6
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 67 %
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd Abs1:9503_buero_produkte_eng.indd Abs1:95 28.05.2010 16:32:18 Uhr28.05.2010 16:32:18 Uhr
www.spittler.com96
SL 650 Surface mounted luminaire for T5 lamps
- Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated in RAL 9006 with structure or in RAL 9016 with structure
- Double parabolic louvre, asymmetrical double parabolic louvre, wall washer, micro prism diffuser or frosted acrylic diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- LOR optimised reflector
- Wire suspension available on request
- Compatible pendant and recessed luminaires
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:9603_buero_produkte_eng.indd Abs1:96 28.05.2010 16:32:20 Uhr28.05.2010 16:32:20 Uhr
97
Office and Administration Lighting
SL 650 Surface mounted luminaire with double parabolic louvre
Surface mounted luminaire with double parabolic louvre for T5 lamps. Housing made
of sheet steel, end caps made of die-cast aluminium, powder-coated. LOR optimised
reflector. Double parabolic louvre made of high-polished metalised pure aluminium
(Al 99.98). VDU application suitable acc. to European Standards EN 12464-1
(excepting 2 x 80 W). Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.681.54.3-18 650.681.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.681.80.3-18 650.681.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.682.54.3-18 650.682.54.6-18 1236 x 146 x 53 mm G5
T5 2 x 35 / 49 W 650.682.49.3-18 1536 x 146 x 53 mm G5
T5 2 x 35 / 49 / 80 W 650.682.80.3-18 650.682.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Ceiling rose, round, RAL 9006 structure 900.001-18
T5 2 x 54 W
UGR 19,0 / 19,0
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 68 %
SL 650 Surface mounted luminaire with asymmetrical double parabolic louvre
Surface mounted luminaire with asymmetrical double parabolic louvre for T5 lamps.
Housing made of sheet steel, end caps made of die-cast aluminium, powder-coated.
LOR optimised reflector. Asymmetrical double parabolic louvre made of high-polished
metalised pure aluminium (Al 99.98). VDU application suitable acc. to European
Standards EN 12464-1 (excepting asymmetrical light portion). Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.671.54.3-18 650.671.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.671.80.3-18 650.671.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
200200200200200
300300300300300
400400400400400
500 cd/klm500 cd/klm500 cd/klm500 cd/klm500 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Ceiling rose, round, RAL 9006 structure 900.001-18
T5 1 x 54 W
Critical radiation angle/1000 cd/m² 64 °
Light output ratio 64 % (excepting the asymmetrical light portion)
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd Abs1:9703_buero_produkte_eng.indd Abs1:97 28.05.2010 16:32:23 Uhr28.05.2010 16:32:23 Uhr
www.spittler.com98
SL 650 Surface mounted luminaire with asymmetrical reflector - wallwasher
Surface mounted luminaire with asymmetrical reflector for T5 lamps. Housing made of
sheet steel, end caps made of die-cast aluminium, powder-coated. LOR optimised
reflector. Asymmetrical reflector made of matt anodised pure aluminium (Al 99.98).
Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.611.54.3-18 650.611.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.611.80.3-18 650.611.80.6-18 1536 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
200200200200200
300300300300300
400400400400400
500 cd/klm500 cd/klm500 cd/klm500 cd/klm500 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Ceiling rose, round, RAL 9006 structure 900.001-18
T5 1 x 54 W
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 77 %
SL 650 Surface mounted luminaire with micro prism diffuser
Surface mounted luminaire with micro prism diffuser for T5 lamps. Housing made of
sheet steel, end caps made of die-cast aluminium, powder-coated. Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.661.54.3-18 650.661.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.661.80.3-18 650.661.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.662.54.3-18 650.662.54.6-18 1236 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Ceiling rose, round, RAL 9006 structure 900.001-18
T5 1 x 54 W
UGR 19,6 / 18,4
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 52 %
03_buero_produkte_eng.indd Abs1:9803_buero_produkte_eng.indd Abs1:98 28.05.2010 16:32:24 Uhr28.05.2010 16:32:24 Uhr
99
Office and Administration Lighting
SL 650 Surface mounted luminaire with frosted acrylic diffuser
Surface mounted luminaire with frosted acrylic diffuser for T5 lamps. Housing made
of sheet steel, end caps made of die-cast aluminium, powder-coated.
Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.691.54.3-18 650.691.54.6-18 1236 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.691.80.3-18 650.691.80.6-18 1536 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.692.54.3-18 650.692.54.6-18 1236 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1236 / 1536
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Ceiling rose, round, RAL 9006 structure 900.001-18
T5 1 x 54 W
UGR 20,1 / 19,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 66 %
Surf
ace
mo
un
ted
lum
inai
res
03_buero_produkte_eng.indd Abs1:9903_buero_produkte_eng.indd Abs1:99 28.05.2010 16:32:25 Uhr28.05.2010 16:32:25 Uhr
www.spittler.com100
SL 790 Recessed luminaire for T5 lamps
- Housing made of extruded aluminium profile, end caps made of aluminium, powder-coated in RAL 9016 with structure
- Opal-white PMMA diffuser
- Polycarbonate diffuser as option available
- Emergency version
- Wall and ceiling installation
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:10003_buero_produkte_eng.indd Abs1:100 28.05.2010 16:32:25 Uhr28.05.2010 16:32:25 Uhr
101
Office and Administration Lighting
SL 790 Recessed luminaire with opal-white PMMA diffuser
Recessed luminaire with opal-white PMMA diffuser for T5 lamps. Housing made
of extruded aluminium profile, end caps made of aluminium, powder-coated in
RAL 9016 with structure. Max. weight: 7 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 14 / 24 W 790.591.24.3-10 790.591.24.6-10 620 x 117 x 90 mm 607 x 106 mm 115 mm G5
T5 1 x 21 / 39 W 790.591.39.3-10 790.591.39.6-10 920 x 117 x 90 mm 907 x 106 mm 115 mm G5
T5 1 x 28 / 54 W 790.591.54.3-10 790.591.54.6-10 1220 x 117 x 90 mm 1207 x 106 mm 115 mm G5
T5 1 x 35 / 49 / 80 W 790.591.80.3-10 790.591.80.6-10 1520 x 117 x 90 mm 1507 x 106 mm 115 mm G5
T5 2 x 28 W 790.592.28.3-10 790.592.28.6-10 1220 x 117 x 90 mm 1207 x 106 mm 115 mm G5
T5 2 x 35 W 790.592.35.3-10 790.592.35.6-10 1520 x 117 x 90 mm 1507 x 106 mm 115 mm G5
117 620 / 920 / 1220 / 1520
90
105 607 / 907 / 1207 / 1507
115
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/kl300 cd/kl300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 790.0901
Emergency light kit 3h 790.0900
T5 1 x 54 W
UGR 19,1 / 19,6
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 57 %
Rec
esse
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:10103_buero_produkte_eng.indd Abs1:101 28.05.2010 16:32:27 Uhr28.05.2010 16:32:27 Uhr
www.spittler.com102
SL 640 Recessed luminaire for T5 lamps
- For metal and fireproof ceilings
- Housing made of sheet steel powder-coated in RAL 9010
- Double parabolic louvre, frosted acrylic diffuser
- Double parabolic louvre made of pure aluminium (Al 99.98), matt-anodised
03_buero_produkte_eng.indd Abs1:10203_buero_produkte_eng.indd Abs1:102 28.05.2010 16:32:29 Uhr28.05.2010 16:32:29 Uhr
103
Office and Administration Lighting
SL 640 Recessed luminaire with double parabolic louvre
Recessed luminaire for metal and fireproof ceilings with double parabolic louvre for T5
lamps. Housing made of sheet steel powder-coated in RAL 9010. Double parabolic louvre
made of pure aluminium (Al 99.98), matt-optic. Max. weight: 3,9 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 2 x 21 / 39 W 640.82.21.3 640.82.21.6 915 x 172 x 50 mm 903 x 164 mm 50 mm G5
T5 2 x 28 / 54 W 640.82.28.3 640.82.28.6 1215 x 172 x 50 mm 1203 x 164 mm 50 mm G5
T5 2 x 35 / 49 W 640.82.35.3 640.82.35.6 1515 x 172 x 50 mm 1503 x 164 mm 50 mm G5
50
172 915 / 1215 / 1515
164 903 / 1203 / 1503
SL 640 Recessed luminaire with frosted acrylic diffuser
Recessed luminaire for metal and fireproof ceilings with frosted acrylic diffuser for T5
lamps. Housing made of sheet steel powder-coated in RAL 9010. Max. weight: 3,9 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 21 / 39 W 640.91.21.6 640.91.21.3 915 x 172 x 50 mm 903 x 164 mm 50 mm G5
T5 1 x 28 / 54 W 640.91.28.6 640.91.28.3 1215 x 172 x 50 mm 1203 x 164 mm 50 mm G5
T5 1 x 35 / 49 W 640.91.35.6 640.91.35.3 1515 x 172 x 50 mm 1503 x 164 mm 50 mm G5
T5 2 x 21 / 39 W 640.92.21.6 640.92.21.3 915 x 172 x 50 mm 903 x 164 mm 50 mm G5
T5 2 x 28 / 54 W 640.92.28.3 640.92.28.6 1215 x 172 x 50 mm 1203 x 164 mm 50 mm G5
T5 2 x 35 / 49 W 640.92.35.3 640.92.35.6 1515 x 172 x 50 mm 1503 x 164 mm 50 mm G5
50
172 915 / 1215 / 1515
164 903 / 1203 / 1503
Rec
esse
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:10303_buero_produkte_eng.indd Abs1:103 28.05.2010 16:32:31 Uhr28.05.2010 16:32:31 Uhr
www.spittler.com104
SL 650 Recessed luminaire for T5 lamps
- Housing and end caps made of sheet steel, powder-coated in RAL 9016 structure
- Double parabolic louvre, frosted acrylic diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- Compatible pendant and surface mounted luminaires
- Also in continuous mounted version available
03_buero_produkte_eng.indd Abs1:10403_buero_produkte_eng.indd Abs1:104 28.05.2010 16:32:34 Uhr28.05.2010 16:32:34 Uhr
105
Office and Administration Lighting
SL 650 Recessed luminaire with double parabolic louvre
Recessed luminaire with double parabolic louvre for T5 lamps. Housing and end caps
made of sheet steel, powder-coated in RAL 9016 with structure. Double parabolic louvre
made of high-polished metalised pure aluminium (Al 99.98). VDU application suitable
acc. to European Standards EN 12464-1. Max. weight: 3,9 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.581.54.3-10 650.581.54.6-10 1225 x 120 x 82 mm 1210 x 105 mm 75 mm G5
T5 1 x 35 / 49 / 80 W 650.581.80.3-10 650.581.80.6-10 1525 x 120 x 82 mm 1510 x 105 mm 75 mm G5
T5 2 x 28 / 54 W 650.582.54.3-10 650.582.54.6-10 1225 x 120 x 82 mm 1210 x 105 mm 75 mm G5
7582
120 1225 / 1525
105 1210 / 1510
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241 T5 2 x 54 W
UGR 19 / 16,3
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 68 %
SL 650 Recessed luminaire with frosted acrylic diffuser
Recessed luminaire with frosted acrylic diffuser for T5 lamps. Housing and end caps
made of sheet steel, powder-coated in RAL 9016 with structure. Max. weight: 3,9 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.591.54.3-10 650.591.54.6-10 1225 x 120 x 82 mm 1210 x 105 mm 75 mm G5
T5 1 x 35 / 49 / 80 W 650.591.80.3-10 650.591.80.6-10 1525 x 120 x 82 mm 1510 x 105 mm 75 mm G5
7582
120 1225 / 1525
105 1210 / 1510
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090 T5 1 x 54 W
UGR 20,1 / 19,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 66 %
Rec
esse
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:10503_buero_produkte_eng.indd Abs1:105 28.05.2010 16:32:37 Uhr28.05.2010 16:32:37 Uhr
www.spittler.com106
SL 650 XF Extra shallow recessed luminaire for T5 lamps
- Housing and end caps made of sheet steel, powder-coated in RAL 9016 structure
- Double parabolic louvre, frosted acrylic diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- Double parabolic louvre made of high-polished, metalised pure aluminium (Al 99.98).
- Recessed height: 50 mm
03_buero_produkte_eng.indd Abs1:10603_buero_produkte_eng.indd Abs1:106 28.05.2010 16:32:39 Uhr28.05.2010 16:32:39 Uhr
107
Office and Administration Lighting
SL 650 XF – Recessed height 50 mmRecessed luminaire with double parabolic louvre
Extra shallow recessed luminaire with double parabolic louvre for T5 lamps. Housing
made of sheet steel, powder-coated in RAL 9016 with structure. Double parabolic
louvre made of high-polished metalised pure aluminium (Al 99.98). VDU application
suitable acc. to European Standards EN 12464-1. Max. weight: 3,8 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.581.54.3XF 650.581.54.6XF 1225 x 121 x 57 mm 1210 x 105 mm 50 mm G5
T5 1 x 35 / 49 / 80 W 650.581.80.3XF 650.581.80.6XF 1525 x 121 x 57 mm 1510 x 105 mm 50 mm G5
T5 2 x 28 W 650.582.28.3XF 650.582.28.6XF 1225 x 121 x 57 mm 1210 x 105 mm 50 mm G5
T5 2 x 35 W 650.582.35.3XF 650.582.35.6XF 1525 x 121 x 57 mm 1510 x 105 mm 50 mm G5
121 1225 / 1525
50
97 1210 / 1510
57
149
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241T5 1 x 54 W
UGR 19,0 / 16,3
Critical radiation angle/1000 cd/m² 65°
Light output ratio 87%
SL 650 XF – Recessed height 50 mmRecessed luminaire with frosted acrylic diffuser
Extra shallow recessed luminaire with frosted acrylic diffuser for T5 lamps.
Housing made of sheet steel, powder-coated in RAL 9016 with structure.
Max. weight: 3,8 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.591.54.3XF 650.591.54.6XF 1225 x 121 x 57 mm 1210 x 105 mm 50 mm G5
T5 1 x 35 / 49 / 80 W 650.591.80.3XF 650.591.80.6XF 1525 x 121 x 57 mm 1510 x 105 mm 50 mm G5
T5 2 x 28 W 650.592.28.3XF 650.592.28.6XF 1225 x 121 x 57 mm 1210 x 105 mm 50 mm G5
T5 2 x 35 W 650.592.35.3XF 650.592.35.6XF 1525 x 121 x 57 mm 1510 x 105 mm 50 mm G5
121 1225 / 1525
50
97 1210 / 1510
57
149
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090T5 1 x 54 W
UGR 20,1 / 19,2
Critical radiation angle/1000 cd/m² 90°
Light output ratio 66%
Rec
esse
d lu
min
aire
03_buero_produkte_eng.indd 107 07.06.2010 18:49:28 Uhr
www.spittler.com108
SL 730 Pendant luminaire for continuous mounting
- Pendant luminaire prepared for continuous mounting
- Pre-assembled throug-wiring with electrical plug-in connection
- One side pre-assembled direct coupler c/w screws and glare protected junction
- C/w one Y-steel wire suspension, continuously adjustable (1.5 m)
- Installation kit has to be ordered separately and consists of 2 end caps, 1 transparent mains supply, 1 additional wire suspension
- Assembling of the end caps without tool using
03_buero_produkte_eng.indd Abs1:10803_buero_produkte_eng.indd Abs1:108 28.05.2010 16:32:44 Uhr28.05.2010 16:32:44 Uhr
109
Office and Administration Lighting
SL 730 Continuous mounted pendant luminaire with double parabolic louvre
Continuous mounted pendant luminaire with double parabolic louvre for direct/ indirect
lighting for T5 lamps. Housing made of extruded aluminium profile, die-cast aluminium
end caps, powder-coated. Double parabolic louvre made of high-polished metalised
aluminium (Al 99.98). Prepared for continuous installation including through wiring
with plug-in connection (male/female), pre-assembled direct coupler and one Y-wire
steel wire suspension. Max. weight: 4,5 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 730.481.54.3L18 730.481.54.6L18 1200 x 223 x 32 mm G5
T5 1 x 35 / 49 / 80 W 730.481.80.3L18 730.481.80.6L18 1500 x 223 x 32 mm G5
T5 3 x 28 / 54 W 730.483.54.3L18 730.483.54.6L18 1200 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.483.49.3L18 730.483.49.6L18 1500 x 223 x 32 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
223
32
1200/1500
1185 /1485
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.323.150-18
Special colour 730.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 3 x 54 W
indirect / direct 80 / 20 %
UGR 11,3 / 11,6
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
SL 730 Continuous mounted pendant luminaire with double parabolic louvre
Continuous mounted pendant luminaire with double parabolic louvre for direct/ indirect
lighting for T5 lamps. Housing made of extruded aluminium profile, die-cast aluminium
end caps, powder-coated. Double parabolic louvre made of high-polished metalised
aluminium (Al 99.98). Prepared for continuous installation including through wiring
with plug-in connection (male/female), pre-assembled direct coupler and one Y-wire
steel wire suspension. Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 730.482.54.3L18 730.482.54.6L18 1200 x 223 x 32 mm G5
T5 2 x 35 / 49 W 730.482.49.3L18 1500 x 223 x 32 mm G5
T5 2 x 35 / 49 / 80 W 730.482.80.3L18 730.482.80.6L18 1500 x 223 x 32 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
223
32
1200/1500
1185 /1485
120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.323.150-18
Special colour 730.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,4 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
Co
nti
nu
ou
s m
ou
nte
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:10903_buero_produkte_eng.indd Abs1:109 28.05.2010 16:32:47 Uhr28.05.2010 16:32:47 Uhr
www.spittler.com110
SL 730 Continuous mounted pendant luminaire with micro prism diffuser
Continuous mounted pendant luminaire with micro prism diffuser for direct/ indirect
lighting for T5 lamps. Housing made of extruded aluminium profile, die-cast aluminium
end caps, powder-coated. Prepared for continuous installation including through wiring
with plug-in connection (male/female), pre-assembled direct coupler and one Y-wire
teel wire suspension. Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 730.462.54.3L18 730.462.54.6L18 1200 x 223 x 32 mm G5
T5 2 x 35 / 49 W 730.462.49.3L18 1500 x 223 x 32 mm G5
T5 2 x 35 / 49 / 80 W 730.462.80.3L18 730.462.80.6L18 1500 x 223 x 32 mm G5
T5 3 x 28 / 54 W 730.463.54.3L18 730.463.54.6L18 1200 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.463.49.3L18 730.463.49.6L18 1500 x 223 x 32 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
223
32
1200/1500
1185 /1485
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.323.150-18
Special colour 730.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 1 x 54 W
indirect / direct 90 / 10 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 75 %
SL 730 Continuous mounted pendant luminaire with micro prism diffuser
Continuous mounted pendant luminaire with micro prism diffuser for direct/ indirect
lighting for T5 lamps. Housing made of extruded aluminium profile, die-cast aluminium
end caps, powder-coated. Prepared for continuous installation including through wiring
with plug-in connection (male/female), pre-assembled direct coupler and one Y-wire
steel wire suspension. Max. weight: 5,0 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 730.433.54.3L18 730.433.54.6L18 1200 x 223 x 32 mm G5
T5 3 x 35 / 49 W 730.433.49.3L18 730.433.49.6L18 1500 x 223 x 32 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
223
32
1200/1500
1185 /1485
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
730.323.150-18
Special colour 730.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 3 x 54 W
indirect / direct 95 / 5 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 77 %
03_buero_produkte_eng.indd Abs1:11003_buero_produkte_eng.indd Abs1:110 28.05.2010 16:32:49 Uhr28.05.2010 16:32:49 Uhr
111
Office and Administration Lighting
03_buero_produkte_eng.indd Abs1:11103_buero_produkte_eng.indd Abs1:111 28.05.2010 16:32:50 Uhr28.05.2010 16:32:50 Uhr
www.spittler.com112
SL 624 Pendant luminaire for continuous mounting
- Pendant luminaire prepared for continuous mounting
- Pre-assembled throug-wiring with electrical plug-in connection
- One side pre-assembled direct coupler c/w screws and glare protected junction
- C/w one Y-steel wire suspension, continuously adjustable (1.5 m)
- Installation kit has to be ordered separately and consists of 2 end caps, 1 transparent mains supply, 1 additional wire suspension
- Assembling of the end caps without tool using
03_buero_produkte_eng.indd Abs1:11203_buero_produkte_eng.indd Abs1:112 28.05.2010 16:32:51 Uhr28.05.2010 16:32:51 Uhr
113
Office and Administration Lighting
SL 624 Continuous mounted pendant luminaire with double parabolic louvre
Pendant luminaire for continuous mounting with double parabolic louvre for direct/indirect
portion of light for T5 lamps. Housing made of steel sheet, end caps made of die-cast
aluminium, powder-coated. Double parabolic louvre made of high-polished metalised pure
aluminium (Al 99.98). Prepared for continuous installation c/w through wiring, incl. plug-in
connection (male/female), pre-assembled direct coupler and 1 Y-steel wire suspension.
Max. weight: 5,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 624.482.54.3L18 624.482.54.6L18 1232 x 190 x 38 mm G5
T5 2 x 35 / 49 W 624.482.49.3L18 1532 x 190 x 38 mm G5
T5 2 x 35 / 49 / 80 W 624.482.80.3L18 624.482.80.6L18 1532 x 190 x 38 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
190
25
1232/1532
1208 /1508
38
120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.323.150-18
Special colour 624.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 2 x 54 W
indirect / direct 55 / 45 %
UGR 14,4 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
SL 624 Continuous mounted pendant luminaire with double parabolic louvre
Pendant luminaire for continuous mounting with double parabolic louvre for direct/indirect
portion of light for T5 lamps. Housing made of steel sheet, end caps made of die-cast
aluminium, powder-coated. Double parabolic louvre made of high-polished metalised pure
aluminium (Al 99.98). Prepared for continuous installation c/w through wiring, incl. plug-in
connection (male/female), pre-assembled direct coupler and 1 Y-steel wire suspension.
Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 624.483.54.3L18 624.483.54.6L18 1232 x 190 x 38 mm G5
T5 3 x 35 / 49 W 624.483.49.3L18 624.483.49.6L18 1532x 190 x 38 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
190
25
1232/1532
1208 /1508
38
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.323.150-18
Special colour 624.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 3 x 54 W
indirect / direct 80 / 20 %
UGR 11,3 / 11,6
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 85 %
Co
nti
nu
ou
s m
ou
nte
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:11303_buero_produkte_eng.indd Abs1:113 28.05.2010 16:32:53 Uhr28.05.2010 16:32:53 Uhr
www.spittler.com114
SL 624 Continuous mounted pendant luminaire with micro prism diffuser
Pendant luminaire for continuous mounting with micro prism diffuser for direct/indirect
portion of light for T5 lamps. Housing made of steel sheet, end caps made of die-cast
aluminium, powder-coated. Prepared for continuous installation c/w through wiring,
incl. plug-in connection (male/female), pre-assembled direct coupler and 1 Y-steel wire
suspension. Max. weight: 5,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 2 x 28 / 54 W 624.462.54.3L18 624.462.54.6L18 1232 x 190 x 38 mm G5
T5 2 x 35 / 49 W 624.462.49.3L18 1532 x 190 x 38 mm G5
T5 2 x 35 / 49 / 80 W 624.462.80.3L18 624.462.80.6L18 1532x 190 x 38 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
190
25
1232/1532
1208 /1508
38
100100100100100
150150150150150
200200200200200
250 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.323.150-18
Special colour 624.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 2 x 54 W
indirect / direct 90 / 10 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 74 %
SL 624 Continuous mounted pendant luminaire with micro prism diffuser
Pendant luminaire for continuous mounting with micro prism diffuser for direct/indirect
portion of light for T5 lamps. Housing made of steel sheet, end caps made of die-cast
aluminium, powder-coated. Prepared for continuous installation c/w through wiring,
incl. plug-in connection (male/female), pre-assembled direct coupler and 1 Y-steel wire
suspension. Max. weight: 6,4 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 3 x 28 / 54 W 624.463.54.3L18 624.463.54.6L18 1232 x 190 x 38 mm G5
T5 3 x 35 / 49 W 624.463.49.3L18 624.463.49.6L18 1532x 190 x 38 mm G5
If you need the luminaire or accessory in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you need the luminaire in graphite (DB 703 structure) please use „-12“. Any other RAL colour „-9“.
190
25
1232/1532
1208 /1508
38
8080808080
120120120120120
160160160160160
200 cd/klm
90°90°90°90°90°
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
90°90°90°90°90°
Attachments (Please order separately!)
Installation kit for end supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.322.150-18
Installation kit for center supply (transparent mains supply, 1,5 m Y-wire suspension, 2 end caps in RAL 9006 structure)
624.323.150-18
Special colour 624.0090
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 3 x 54 W
indirect / direct 95 / 5 %
UGR - Critical radiation angle/1000 cd/m² 65 °
Light output ratio 77 %
03_buero_produkte_eng.indd Abs1:11403_buero_produkte_eng.indd Abs1:114 28.05.2010 16:32:54 Uhr28.05.2010 16:32:54 Uhr
115
Office and Administration Lighting
EFZN Energieforschungszentrum Niedersachsen, Germany
03_buero_produkte_eng.indd Abs1:11503_buero_produkte_eng.indd Abs1:115 28.05.2010 16:32:55 Uhr28.05.2010 16:32:55 Uhr
www.spittler.com116
SL 650 Pendant luminaire for continuous mounting
- Pendant luminaire prepared for continuous mounting
- Pre-assembled throug-wiring with electrical plug-in connection
- End caps, connectors, wire suspensions, mains supply and ceiling rose have to be ordered separately (see attachments list)
03_buero_produkte_eng.indd Abs1:11603_buero_produkte_eng.indd Abs1:116 28.05.2010 16:32:58 Uhr28.05.2010 16:32:58 Uhr
117
Office and Administration Lighting
SL 650 Continuous mounted pendant luminaire with double parabolic louvre
Continuous mounted pendant luminaire with double parabolic louvre for direct/ indirect
lighting for T5 lamps. Housing made of sheet steel, powder-coated. Double parabolic
louvre made of high-polished metalised pure aluminium (Al 99.98). VDU application
suitable acc. to European Standards EN 12464-1. C/w pre-assembled through wiring.
End caps, connectors, wire suspensions, mains supply and ceiling rose have to be
ordered separately (see attachments list). Max. weight: 3,7 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.481.54.3L18 650.481.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.481.80.3L18 650.481.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.482.54.3L18 650.482.54.6L18 1200 x 146 x 53 mm G5
T5 2 x 35 / 49 W 650.482.49.3L18 1500 x 146 x 53 mm G5
T5 2 x 35 / 49 / 80 W 650.482.80.3L18 650.482.80.6L18 1500 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
120120120120120
180180180180180
300 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241
2 end caps, RAL 9006 structure 650.4980-18
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Coupler page 118
T5 2 x 54 W
indirect / direct 50 / 50 %
UGR 18,6 / 15,1
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 86 %
Co
nti
nu
ou
s m
ou
nte
d lu
min
aire
s
SL 650 Continuous mounted pendant luminaire with micro prism diffuser
Continuous mounted pendant luminaire with micro prism diffuser for direct/ indirect
lighting for T5 lamps. Housing made of sheet steel, powder-coated. VDU application
suitable acc. to European Standards EN 12464-1 (only with one lamp). C/w pre-assembled
through wiring. End caps, connectors, wire suspensions, mains supply and ceiling rose
have to be ordered separately (see attachments list). Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.461.54.3L18 650.461.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.461.80.3L18 650.461.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.462.54.3L18 650.462.54.6L18 1200 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9006 structure 650.4980-18
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
Coupler page 118
T5 1 x 54 W
indirect / direct 55 / 45 %
UGR 14,5 / 12,2
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 64 %
03_buero_produkte_eng.indd Abs1:11703_buero_produkte_eng.indd Abs1:117 28.05.2010 16:32:59 Uhr28.05.2010 16:32:59 Uhr
www.spittler.com118
SL 650 Continuous mounted pendant luminaire with frosted acrylic diffuser
Continuous mounted pendant luminaire with frosted acrylic diffuser for direct/ indirect
lighting for T5 lamps. Housing made of sheet steel, powder-coated. C/w pre-assembled
through wiring. End caps, connectors, wire suspensions, mains supply and ceiling rose
have to be ordered separately (see attachments list). Max. weight: 3,9 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.491.54.3L18 650.491.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.491.80.3L18 650.491.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.492.54.3L18 650.492.54.6L18 1200 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
8080808080
120120120120120
200 cd/klm
120°120°120°120°120°
150°150°150°150°150°150°150°150°150°150°
120°120°120°120°120°
60°60°60°60°60°
30°30°30°30°30° 30°30°30°30°30°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9006 structure 650.4980-18
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, round, RAL 9006 structure 900.001-18
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 1 x 54 W
indirect / direct 50 / 50 %
UGR 13,1 / 13,1
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 64 %
SL 650 Coupler for continuous mounting
Direct coupler
- Fixing set for continuous mounting without distance between luminaires
- Light exit without optical interruptions
Version Art.-No.
Coupler Set 650.4990
Luminaire connection by spacer
- Linear spacer to connect two luminaires
- C/w 2 end caps and fixing material
Version L = 300 mm L = 500 mm
RAL 9016 structure 650.4991-10 650.4992-10
RAL 9006 structure 650.4991-18 650.4992-18
03_buero_produkte_eng.indd Abs1:11803_buero_produkte_eng.indd Abs1:118 28.05.2010 16:33:00 Uhr28.05.2010 16:33:00 Uhr
119
Office and Administration Lighting
Diesterwegschule in Braunschweig, Germany
03_buero_produkte_eng.indd Abs1:11903_buero_produkte_eng.indd Abs1:119 28.05.2010 16:33:05 Uhr28.05.2010 16:33:05 Uhr
www.spittler.com120
SL 650 Surface mounted luminaire for continuous mounting
- Surface mounted luminaire prepared for continuous mounting
- Pre-assembled throug-wiring with electrical plug-in connection
- End caps, connectors, wire suspensions, mains supply and ceiling rose have to be ordered separately (see attachments list)
- Wire suspension available on request
03_buero_produkte_eng.indd Abs1:12003_buero_produkte_eng.indd Abs1:120 28.05.2010 16:33:07 Uhr28.05.2010 16:33:07 Uhr
121
Office and Administration Lighting
SL 650 Continuous surface mounted luminaire with double parabolic louvre
Continuous surface mounted luminaire with double parabolic louvre for T5 lamps.
Housing made of sheet steel, powder-coated. LOR optimised reflector. Double parabolic
louvre made of high-polished metalised pure aluminium (Al 99.98). VDU application
suitable acc. to European Standards EN 12464-1 (excepting 2 x 80 W). C/w pre-assembled
through wiring. End caps, connectors, wire suspensions, mains supply and ceiling rose
have to be ordered separately (see attachments list). Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.681.54.3L18 650.681.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.681.80.3L18 650.681.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.682.54.3L18 650.682.54.6L18 1200 x 146 x 53 mm G5
T5 2 x 35 / 49 W 650.682.49.3L18 1500 x 146 x 53 mm G5
T5 2 x 35 / 49 / 80 W 650.682.80.3L18 650.682.80.6L18 1500 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9006 structure 650.4980-18
Direct coupler 650.4990
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 2 x 54 W
UGR 19,0 / 19,0
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 68 %
SL 650 Continuous surface mounted luminaire with micro prism diffuser
Continuous surface mounted luminaire with micro prism diffuser for T5 lamps. Housing
made of sheet steel, powder-coated. C/w pre-assembled through wiring. End caps,
connectors, wire suspensions, mains supply and ceiling rose have to be ordered separately
(see attachments list). Max. weight: 4,1 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.661.54.3L18 650.661.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.661.80.3L18 650.661.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.662.54.3L18 650.662.54.6L18 1200 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9006 structure 650.4980-18
Direct coupler 650.4990
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 1 x 54 W
UGR 19,6 / 18,4
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 52 %
Co
nti
nu
ou
s m
ou
nte
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:12103_buero_produkte_eng.indd Abs1:121 28.05.2010 16:33:09 Uhr28.05.2010 16:33:09 Uhr
www.spittler.com122
SL 650 Continuous surface mounted luminaire with frosted acrylic diffuser
Continuous surface mounted luminaire with frosted acrylic diffuser for T5 lamps.
Housing made of sheet steel, powder-coated. C/w pre-assembled through wiring.
End caps, connectors, wire suspensions, mains supply and ceiling rose have to be
ordered separately (see attachments list). Max. weight: 4,5 kg
Surface: RAL 9006 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Socket type
T5 1 x 28 / 54 W 650.691.54.3L18 650.691.54.6L18 1200 x 146 x 53 mm G5
T5 1 x 35 / 49 / 80 W 650.691.80.3L18 650.691.80.6L18 1500 x 146 x 53 mm G5
T5 2 x 28 / 54 W 650.692.54.3L18 650.692.54.6L18 1200 x 146 x 53 mm G5
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. Any other RAL colour „-9“.
146
53
1200 / 1500
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9006 structure 650.4980-18
Direct coupler 650.4990
Y-wire suspension, 1,5 m 650.321-1500
Mains supply, transparent, 5 x 1,5 mm2 650.1955.2T
Ceiling rose, square, RAL 9006 structure 900.004-18
T5 1 x 54 W
UGR 20,1 / 19,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 66 %
03_buero_produkte_eng.indd Abs1:12203_buero_produkte_eng.indd Abs1:122 28.05.2010 16:33:10 Uhr28.05.2010 16:33:10 Uhr
123
Office and Administration Lighting
Kreuzgymansium in Dresden, Germany
Erwachsenenbildungswerk in Bamberg, Germany
03_buero_produkte_eng.indd Abs1:12303_buero_produkte_eng.indd Abs1:123 28.05.2010 16:33:11 Uhr28.05.2010 16:33:11 Uhr
www.spittler.com124
SL 650 Continuous mounted recessed luminaire
- Recessed luminaire prepared for continuous mounting
- Pre-assembled throug-wiring with electrical plug-in connection
- Double parabolic louvre, frosted acrylic diffuser
- Double parabolic louvre: VDU application suitable acc. to European Standards EN 12464-1
- End caps and coupler have to be ordered separately (see attachments list)
03_buero_produkte_eng.indd Abs1:12403_buero_produkte_eng.indd Abs1:124 28.05.2010 16:33:17 Uhr28.05.2010 16:33:17 Uhr
125
Office and Administration Lighting
SL 650 Continuous mounted recessed luminaire with double parabolic louvre
Continuous recessed luminaire with double parabolic louvre for T5 lamps. Housing made
of sheet steel, powder-coated in RAL 9016 with structure. LOR optimised reflector.
Double parabolic louvre made of high-polished metalised pure aluminium (Al 99.98).
VDU application suitable acc. to European Standards EN 12464-1. Prepared for continuous
mounting c/w pre-assembled through wiring. End caps and coupler have to be ordered
separately (see attachments list). Max. weight: 3,5 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.581.54.3L10 650.581.54.6L10 1200 x 120 x 82 mm 1200 x 105 mm 75 mm G5
T5 1 x 35 / 49 / 80 W 650.581.80.3L10 650.581.80.6L10 1500 x 120 x 82 mm 1500 x 105 mm 75 mm G5
T5 2 x 28 / 54 W 650.582.54.3L10 650.582.54.6L10 1200 x 120 x 82 mm 1200 x 105 mm 75 mm G5
120 1200 / 1500
75
105 1200 / 1500
200200200200200
300300300300300
400 cd/klm400 cd/klm400 cd/klm400 cd/klm400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
Double parabolic louvre matt-optic 650.5241
2 end caps, RAL 9016 structure 650.4981-10
Direct coupler 650.4995
T5 2 x 54 W
UGR 19 / 16,3
Critical radiation angle/1000 cd/m² 65 °
Light output ratio 68 %
SL 650 Continuous mounted recessed luminaire with frosted acrylic diffuser
Continuous mounted recessed luminaire with frosted acrylic diffuser for T5 lamps.
Housing made of sheet steel, powder-coated in RAL 9016 structure. LOR optimised
reflector. Prepared for continuous mounting including assembled through wiring.
End caps and coupler have to be ordered separately (see attachments list).
Max. weight: 3,5 kg
Surface: RAL 9016 structure
Version High frequency ballast (HF) Digital dimmable HF ballast (DALI) Length x width x height Ceiling cut-out Recessed height Socket type
T5 1 x 28 / 54 W 650.591.54.3L10 650.591.54.6L10 1200 x 120 x 82 mm 1200 x 105 mm 75 mm G5
T5 1 x 35 / 49 / 80 W 650.591.80.3L10 650.591.80.6L10 1500 x 120 x 82 mm 1500 x 105 mm 75 mm G5
120 1200 / 1500
75
105 1200 / 1500
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
Attachments (Please order separately!)
Emergency light kit 1h 650.0901
Emergency light kit 3h 650.0900
Special colour 650.0090
2 end caps, RAL 9016 structure 650.4981-10
Direct coupler 650.4995
T5 1 x 54 W
UGR 20,1 / 19,2
Critical radiation angle/1000 cd/m² 90 °
Light output ratio 66 %
Co
nti
nu
ou
s m
ou
nte
d lu
min
aire
s
03_buero_produkte_eng.indd Abs1:12503_buero_produkte_eng.indd Abs1:125 28.05.2010 16:33:19 Uhr28.05.2010 16:33:19 Uhr
126 www.spittler.com
04_buero_kanal.indd Abs1:12604_buero_kanal.indd Abs1:126 28.05.2010 15:15:07 Uhr28.05.2010 15:15:07 Uhr
127
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
SL 787 - Lighting SystemA system which leaves nothing to be desired
- Flexible in planning and execution
- Installation-friendly and effi cient in mounting
- Economical: energy-saving by high effi ciency and most
up-to-date light technique
- Quick availability
- Special requests realisable on demand
- Illuminated corners
- Homogeneous light distribution
- Linear or diagonally overlapping arrangement of gear trays
- All gear trays with Multiwatt electronic ballast
- Double parabolic louvre VDU workstation suitable
according to EN 12464-1
- All profi les are prepared for site installation
04_buero_kanal.indd Abs1:12704_buero_kanal.indd Abs1:127 28.05.2010 15:15:07 Uhr28.05.2010 15:15:07 Uhr
128
70,5
85100
10074
70,5
85
70,5
85
www.spittler.com
Suspended version Surface mounted version
Version Art-No.
Trimless profi le 787.590.1000
- High-quality extruded aluminium profi le
- Colour: anodised
- Recessed version fl ush with ceiling and wall
- Surface mounted and suspended version
- Available light optics: double parabolic louvre made of MIRO-SILVER®, micro prism diffuser, opal-white PMMA diffuser
- Gear trays and light optics installed without any tools by SPITTLER click-in system
- Gear trays with Multiwatt ballast
- Attention: Please note required profi le length along with the order!
- Profi le will be delivered in modules
Recessed version Surface mounted versionSuspended version
You will fi nd gear trays and light optics on pages 134-136!
SL 787 – Trimless profi le
Attention: During the luminaire operation the aluminium profi lecould extend approx. 1 mm per running meter.
04_buero_kanal.indd Abs1:12804_buero_kanal.indd Abs1:128 28.05.2010 15:15:08 Uhr28.05.2010 15:15:08 Uhr
129
787.0901
787.4991
787.321-1500
787.4990
787.4984
787.20.090
650.1955.2T
900.001-18
787.07.1000
787.0090
900.004-18
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
Attachments (Please order separately!)
Individual corner
- On request
Blind cover
- According to request- Made of extruded aluminium profi le- Colour: anodised
Coupler for surface mounted or suspended versions
- Colour: powder-coated in anodically exidisec shade
Profi le in special RAL colour
Emergency kit 1 hour
Recessed kit for plasterboard ceilings
- Recessed version: fl ush with ceiling - Quantity is defi ned by factory- Ceiling plate thickness from 10-25 mm- Other ceiling types on request
Y-steel wire suspension
- Length: 1,5 m
Two end caps
- Made of die-cast aluminium- Colour: powder-coated in anodically exidisec shade
Round ceiling rose
- Powder-coated in RAL 9006 structure- Diameter: ø 80 mm- Height: 25 mm
Corner coupler
- 90° corner- Made of extruded aluminium profi le- Colour: anodised
1.8 m transparent mains supply
- C/w terminal block and suspension retainer- Through-wiring 5 x 1.5 mm²
Square ceiling rose
- Powder-coated in RAL 9006 structure- Dimensions: 80 x 80 x 25 mm
04_buero_kanal.indd Abs1:12904_buero_kanal.indd Abs1:129 28.05.2010 15:15:08 Uhr28.05.2010 15:15:08 Uhr
130
70,5
85
100
10074
www.spittler.com
Recessed version
Version Art-Nr.
Profi le with frame 787.591.1000
- High-quality extruded aluminium profi le
- Colour: powder-coated in white (RAL 9016 structure)
- Recessed version with 8 mm frame
- Available light optics: double parabolic louvre made of MIRO-SILVER®, micro prism diffuser, opal-white PMMA diffuser
- Gear trays and light optics installed without any tools by SPITTLER click-in system
- Gear trays with Multiwatt ballast
- Attention: Please note required profi le length along with the order!
- Profi le will be delivered in modules
Recessed version
You will fi nd gear trays and light optics on pages 134-136!
SL 787 – Profi le with frame
Attention: During the luminaire operation the aluminium profi lecould extend approx. 1 mm per running meter.
04_buero_kanal.indd Abs1:13004_buero_kanal.indd Abs1:130 28.05.2010 15:15:08 Uhr28.05.2010 15:15:08 Uhr
131
787.4982
787.21.090
787.07.1000
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
787.0901
787.4992 787.0090
Attachments (Please order separately!)
Individual corner
- On request
Profi le in special RAL colour
Emergency kit 1 hour
Recessed kit for plasterboard ceilings
- Quantity is defi ned by factory- Ceiling plate thickness from 10-25 mm- Other ceiling types on request
Two end caps
- Made of die-cast aluminium- Colour: powder-coated in white (RAL 9016 structure)
Corner coupler
- 90° corner- Made of extruded aluminium profi le- Colour: powder-coated in white (RAL 9016 structure)
Blind cover
- According to request- Made of extruded aluminium profi le- Colour: powder-coated in white (RAL 9016 structure)
04_buero_kanal.indd Abs1:13104_buero_kanal.indd Abs1:131 28.05.2010 15:15:08 Uhr28.05.2010 15:15:08 Uhr
132
70,5
85
17
85 8574
82
85100
10086
www.spittler.com
SL 787 – Profi le with shadow gap
Recessed version: semi-recessed Recessed version: fl ush with ceiling
Version Art-No.
Profi le with shadow gap 787.592.1000
- High-quality extruded aluminium profi le
- Colour: anodised
- Recessed version with shadow gap fl ush with the ceiling
- Semi-recessed version with shadow gap
- Available light optics: double parabolic louvre made of MIRO-SILVER®, micro prism diffuser, opal-white PMMA diffuser
- Gear trays and light optics installed without any tools by SPITTLER click-in system
- Gear trays with Multiwatt ballast
- Attention: Please note required profi le length along with the order!
- Profi le will be delivered in modules
You will fi nd gear trays and light optics on pages 134-136!
Attention: During the luminaire operation the aluminium profi lecould extend approx. 1 mm per running meter.
Recessed version: semi-recessedRecessed version: fl ush with ceiling
04_buero_kanal.indd Abs1:13204_buero_kanal.indd Abs1:132 28.05.2010 15:15:08 Uhr28.05.2010 15:15:08 Uhr
133
787.0901
787.4991 787.07.1000
787.0090
787.22.090
787.4983
787.4993
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
Profi le in special RAL colour
Blind cover
- According to request- Made of extruded aluminium profi le- Colour: anodised
Individual corner
- On request
Attachments (Please order separately!)
Emergency kit 1 hour
Recessed kit for plasterboard ceilings
- Recessed version: fl ush with ceiling - Quantity is defi ned by factory- Ceiling plate thickness from 10-25 mm- Other ceiling types on request
Recessed kit for plasterboard ceilings
- Recessed version: semi-recessed- Quantity is defi ned by factory- Ceiling plate thickness from 10-25 mm- Other ceiling types on request
Two end caps
- Made of die-cast aluminium- Colour: powder-coated in anodically exidisec shade
Corner coupler
- 90° corner- Made of extruded aluminium profi le- Colour: anodised
04_buero_kanal.indd Abs1:13304_buero_kanal.indd Abs1:133 28.05.2010 15:15:09 Uhr28.05.2010 15:15:09 Uhr
134
54 Watt: 1185 mm 54 Watt: 1185 mm 54 Watt: 1185 mm 54 Watt: 1185 mm
www.spittler.com
Calculation chart (End caps are not considered.)
SL 787 – Gear tray for linear installation
- Gear tray made of white sheet steel with integrated refl ection surface
- Linear lamp arrangement
- Quick installation without any tools by SPITTLER click-in system
- Pre-assembled through-wiring
- Integrated Multiwatt ballast
- 5-pole terminal block
VersionHigh frequency
ballastDigital dimmable HF ballast
(DALI)Length Socket Weight
T16 14 / 24 W 7.51.14.53L 7.51.14.56L 585 mm G5 0,7 kg
T16 21 / 39 W 7.51.21.53L 7.51.21.56L 885 mm G5 0,8 kg
T16 28 / 54 W 7.51.28.53L 7.51.28.56L 1185 mm G5 0,9 kg
T16 35 / 49 / 80 W 7.51.35.53L 7.51.35.56L 1485 mm G5 1,0 kg
Use for double parabolic louvre or batten lights
Attention: Profi le length is due to the quantity of gear trays.
Planning example
Profi le length: 4 gear trays (7.51.28.53L) à 54 Watt = profi le length 4740 mm + end caps
required length 14 / 24 Watt 21 / 39 Watt 28 / 54 Watt 35 / 49 / 80 Watt fi nal length
2,0 m 1 1 2,07 m
2,5 m 1 1 2,67 m
3,0 m 2 2,97 m
3,5 m 1 2 3,56 m
4,0 m 2 1 3,86 m
5,0 m 1 3 5,04 m
7,5 m 5 7,43 m
10,0 m 1 6 10,10 m
15,0 m 10 14,85 m
20,0 m 1 13 19,89 m
25,0 m 1 16 24,95 m
50,0 m 1 33 50,19 m
04_buero_kanal.indd Abs1:13404_buero_kanal.indd Abs1:134 28.05.2010 15:15:09 Uhr28.05.2010 15:15:09 Uhr
135
28 Watt: 1185 mm 28 Watt: 1060 mm 28 Watt: 1060 mm 28 Watt: 1060 mm
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
VersionHigh frequency
ballastDigital dimmable HF ballast
(DALI)Length Socket Weight
T16 14 / 24 W 7.51.14.53V 7.51.14.56V 585 mm G5 0,7 kg
T16 21 / 39 W 7.51.21.53V 7.51.21.56V 885 mm G5 0,8 kg
T16 28 / 54 W 7.51.28.53V 7.51.28.56V 1185 mm G5 0,9 kg
T16 35 / 49 W 7.51.35.53V 7.51.35.56V 1485 mm G5 1,0 kg
required length 14 / 24 Watt 21 / 39 Watt 28 / 54 Watt 35 / 49 / 80 Watt fi nal length
2,0 m 1 1 1,94 m
2,5 m 1 1 2,54 m
3,0 m 1 2 3,00 m
3,5 m 2 1 3,60 m
4,0 m 1 2 3,90 m
4,5 m 1 3 4,66 m
5,0 m 1 3 5,05 m
10,0 m 1 7 10,10 m
15,0 m 11 15,08 m
20,0 m 2 13 19,82 m
25,0 m 18 24,60 m
50,0 m 1 1 35 49,24 m
- Gear tray made of white sheet steel with integrated refl ection surface
- Diagonally overlapping lamp arrangement
- Homogeneous almost uniform appearance
- Quick installation without any tools by SPITTLER click-in system
- Pre-assembled through-wiring
- Integrated Multiwatt ballast
- 5-pole terminal block
SL 787 – Gear tray for diagonal overlapping gear tray
Use for micro prism or opal white PMMA diffuser
Planning example
Attention: Profi le length is due to the quantity of gear trays.
Profi le length: 4 gear trays (7.51.28.53V) á 28 Watt = profi le length 4360 mm + end caps
Optimum overlapping per gear tray: 120 mm
Calculation chart (End caps are not considered.)
04_buero_kanal.indd Abs1:13504_buero_kanal.indd Abs1:135 28.05.2010 15:15:09 Uhr28.05.2010 15:15:09 Uhr
136 www.spittler.com
Double parabolic louvre made of MIRO-SILVER®
Version Length Art-No. Weight
14 / 24 W 585 mm 787.08.14 0,2 kg
21 / 39 W 885 mm 787.08.21 0,2 kg
28 / 54 W 1185 mm 787.08.28 0,3 kg
35 / 49 / 80 W 1485 mm 787.08.35 0,3 kg
Micro prism
Version Art-Nr.
Micro prism 787.06.1000
Opal white PMMA diffuser
Version Art-Nr.
Opal white PMMA diffuser 787.04.1000
Attention: Please note required profi le length along with the order!
Attention: Please note required profi le length along with the order!
The opal white PMMA diffuser creates a very constant homogenous
illumination. The light atmosphere has a convenient and comfortable
effect. It is mounted into the profi le without any tools by the
SPITTLER Click-In System.
The light guiding micro prism has specifi cally been developed for high
luminous fl ux. By concentration of the light radiation this has the
effect of a higher illumination power on the working surface while the
dazzling effect is reduced at the same time. Mounting into the profi le
is done by the uncomplicated SPITTLER Click-In System.
The used material MIRO-SILVER® compels by a total refl ection of 98 %.
The high-brilliant double parabolic louvre with MIRO-SILVER® coating
provides the highest grades of effi ciency of 90 % at a complete liberty
of colour interference. VDU workstation suitable as per European
Standards EN 12464-1 is guaranteed. The double parabolic louvre is as
well mountable in the profi le by the simple SPITTLER Click-In System
and additionally secured against falling-off when changing the lamp.
SL 787 – Light optics
04_buero_kanal.indd Abs1:13604_buero_kanal.indd Abs1:136 28.05.2010 15:15:09 Uhr28.05.2010 15:15:09 Uhr
137
Click-In
Click-In
Click-In
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
SPITTLER Click-In System
The simple and quick mounting of our luminaire systems
help you to keep installation costs under control already in
the planning phase. Therefore, we have developed the
SPITTLER Click-In System for the series SL 787 and SL 790.
Gear trays and optics can hence be mounted in the profi le
effortlessly with only a few simple actions. This doesn’t only
mean saving time during installation but also keeping later
exchanges of luminaires uncomplicated.
04_buero_kanal.indd Abs1:13704_buero_kanal.indd Abs1:137 28.05.2010 15:15:09 Uhr28.05.2010 15:15:09 Uhr
138 www.spittler.com
04_buero_kanal.indd Abs1:13804_buero_kanal.indd Abs1:138 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
139
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
SL 790 – Lighting systemLight non-stop
- Flexible in planning and execution
- Installation-friendly and effi cient in mounting
- Quick availability
- Special requests realisable on demand
- Illuminated corners
- Homogeneous light distribution
- Linear arrangement of gear trays
- Gear trays are linearly movable in the profi le
- All gear trays with Multiwatt electronic ballast
- All profi les are prepared for site installation
04_buero_kanal.indd Abs1:13904_buero_kanal.indd Abs1:139 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
140
117
90115
115105
www.spittler.com
Version Art-No.
Profi le with frame 790.591.1000
- High-quality extruded aluminium profi le
- Colour: powder-coated in white (RAL 9016 structure)
- Recessed version with 10 mm frame
- Ceiling or wall mounting
- Light optics: opal-white PMMA diffuser
- Gear trays and light optics installed without any tools by SPITTLER click-in system
- Gear trays linear movable
- Also available as single luminaire
- Lower recessed heights on request (up to 95 mm)
- Gear trays with Multiwatt ballast
- Attention: please note required profi le length along with the order!
- Profi le will be delivered in modules
You will fi nd gear trays and light optics on pages 142-143!
Attention: During the luminaire operation the aluminium profi lecould extend approx. 1 mm per running meter.
Recessed version
SL 790 – Profi le with frame
04_buero_kanal.indd Abs1:14004_buero_kanal.indd Abs1:140 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
141
790.4991
790.20.090
790.4981
790.0901
790.0090
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
Attachments (Please order separately!)
Recessed kit for plasterboard ceilings
- Quantity is defi ned by factory- Ceiling plate thickness from 10-25 mm- Other ceiling types on request
Two end caps
- Made of die-cast aluminium- Colour: powder-coated in white (RAL 9016 structure)
Corner coupler
- 90° corner
- Made of extruded aluminium profi le- Colour: powder-coated in white (RAL 9016 structure)
Profi le in special RAL colour
Emergency kit 1 hour
Individual corner
- On request
04_buero_kanal.indd Abs1:14104_buero_kanal.indd Abs1:141 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
142
54 Watt: 1185 mm 54 Watt: 1065 mm 54 Watt: 1065 mm 54 Watt: 1065 mm
www.spittler.com
SL 790 – Gear tray for linear overlapping installation
- Gear tray made of white sheet steel with integrated refl ection surface
- Linear overlapping arrangement
- Quick installation without any tools by SPITTLER click-in system
- Pre-assembled through-wiring
- Integrated Multiwatt ballast
- 5-pole terminal block
VersionHigh frequency
ballastDigital dimmable HF ballast
(DALI)Lenght Socket Weight
T16 14 / 24 W 7.51.14.53L 7.51.14.56L 585 mm G5 0,7 kg
T16 21 / 39 W 7.51.21.53L 7.51.21.56L 885 mm G5 0,8 kg
T16 28 / 54 W 7.51.28.53L 7.51.28.56L 1185 mm G5 0,9 kg
T16 35 / 49 / 80 W 7.51.35.53L 7.51.35.56L 1485 mm G5 1,0 kg
Planning example
Attention: Profi le length is due to the quantity of gear trays.
Profi le length: 4 gear trays (7.51.28.53L) à 54 Watt = profi le length 4380 mm + end caps
Optimum overlapping per gear tray: 120 mm
Another special feature: the gear tray is linearly
movable. This gives you the opportunity to balance
later tolerances. The optimum overlap is 120 mm.
required length 14 / 24 Watt 21 / 39 Watt 28 / 54 Watt 35 / 49 / 80 Watt fi nal length
2,0 m 1 1 1,94 m
2,5 m 1 1 2,54 m
3,0 m 1 2 3,00 m
3,5 m 1 2 3,60 m
4,0 m 3 4,20 m
4,5 m 1 3 4,66 m
5,0 m 1 3 4,96 m
10,0 m 1 7 10,10 m
15,0 m 11 15,08 m
20,0 m 1 14 20,22 m
25,0 m 1 18 25,06 m
50,0 m 1 36 49,84 m
Calculation chart (End caps are not considered.)
04_buero_kanal.indd Abs1:14204_buero_kanal.indd Abs1:142 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
143
Office and Administraion Lighting
Lig
hti
ng
Sys
tem
SL 790 – Light optic
Opal white PMMA diffuser
Version Art-No.
opal white PMMA diffuser 790.04.1000
The opal white PMMA diffuser creates a very constant homogenous
illumination. The light atmosphere has a convenient and comfortable
effect. It is mounted into the profi le without any tools by the
SPITTLER Click-In System.
Attention: Please note required profi le length along with the order!
04_buero_kanal.indd Abs1:14304_buero_kanal.indd Abs1:143 28.05.2010 15:15:10 Uhr28.05.2010 15:15:10 Uhr
144
NEW
NEW
EB 01
EB 02
EB 12
EB 18
EB 10
EB 21 / EB 22
AS 12
AS KA 12
www.spittler.com
154 Recessed lights
156 Recessed lights
150 Recessed lights
152 Recessed lights
158 Recessed lights
160 Track lights
174 Track lights
172 Track lights
05_verkauf_inhalt.indd 144 29.05.2010 10:42:17 Uhr
145
NEW
NEW
NEW
NEW
NEW
AS 13 KR 12 EB PL 922
AS 18 KR 18 EB
AS 19 KR 23 LED
AS 23 LED KA 12
AS 27 KA 18
MIDI PL 910
MODE PL 912
SH 12 PL 916
Retail Lighting
Retail Lighting
163 Track lights
176 Track lights
166 Track lights
178 Track lights
192 Shelf luminaires
198 Gimbal recessed
luminaires
200 Gimbal recessed luminaires
231 Pendant luminaires
202 Gimbal recessed luminaires
204 Gimbal recessed luminaires
212 Gimbal pendant luminaires
180 Track lights 208 Gimbal recessed luminaires
216 Gimbal pendant luminaires
229 Pendant luminaires
230 Pendant luminaires
182 Track lights
196 Wall luminaires
222 Pendant luminaires
186 Track lights
194 Wall luminaires
Ret
ail L
igh
tin
g
232 Pendant luminaires
05_verkauf_inhalt.indd 145 29.05.2010 10:42:23 Uhr
146 www.spittler.com
Ambience Filter
Light and colour determine the atmosphere of a room and
considerably influence the perception of goods on display, for
this reason SPITTLER offers ambience filters. These filters ensure
the presentation of products appear „in their best light“. Whether
displaying fresh baked and confectionary goods or fruit and
vegetables, ambience filters provide a vivid to every detail and the
main colours are accentuated.
The vapour-coated dichroic surface of the glass filters ensures that,
compared with conventional filters, the non-passing radiation is not
absorbed but reflected. Hence, the thermal impact on the goods is
significantly lower through the use of dichroic filters.
SPITTLER‘s ambience filters always guarantee the right light to you
for every special application.
You will find a selection of SPITTLER Ambience Filters on pages 236,
including a short description on their recommended application.
Reflector Technology
In lighting technology a high and consistent light performance from the reflector is the decisive factor for success, and only the right light
source will place your sales merchandise into the „spotlight“. SPITTLER have developed their spherical facets reflector especially for these
applications. The spherically formed facets are designed to achieve optimal efficiency from the lamp by ensuring the illuminated surface is
uniform without any dark spots providing the highest possible degree of efficiency and uniformity. Additionally the spherical facetted reflec-
ter assures a superb colour rendering compared to standard facetted reflectors. This is achieved by the dynamic reflective properties, over
a larger surface area, from the spherical facets of the reflector which compensates for the gravity effect of the lamp. SPITTLER reflectors
are computer designed with the most up-to-date technology to provide high performance lighting to meet the requirements of the most
demanding lighting tasks.
SPITTLER‘s interchangeable reflector technology provides a further additional advantage by offering a simple changeover of the reflector
without any tools, easily altering the fitting from a wide beam to narrow beam distribution. This gives an advantage by offering the flexibili-
ty to quickly change the distribution to suit the retail display, always placing the merchandise in prime focus.
05_verkauf_inhalt.indd 146 29.05.2010 10:42:33 Uhr
147
05_verkauf_inhalt.indd 147 29.05.2010 10:42:34 Uhr
148 www.spittler.com
06_verkauf_produkte_eng.indd 148 29.05.2010 10:49:03 Uhr
149
Retail Lighting
Hans Weibel Bäckerei-Konditorei in Sursee, Switzerland
06_verkauf_produkte_eng.indd 149 29.05.2010 10:49:04 Uhr
150 www.spittler.com
EB 12Recessed light
- Recessed light made of magnesium and aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Luminaire head rotatable up to 355° and adjustable up to 50°
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- C/w remote ballast
- Serial safety glass pane 12.901 for HIT-TC-CE
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 150 29.05.2010 10:49:10 Uhr
151
Retail Lighting
120120
EB 12 – rotatable and adjustableRecessed light for HIT-TC-CE and low voltage halogen lamps
Ø 120
120
Ø 128
Recessed light rotatable up to 355°, adjustable up to 50°. Magnesium and aluminium
die-cast housing, powder coated. C/w remote high frequency ballast (HF). Please order
the transformer for the halogen lamp version separately on page 240. Spherical facets
reflector made of pure aluminium, spot, medium or flood. Serial safety glass pane
12.901 for HIT-TC-CE. Max. weight: 1.8 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.154.20.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.154.35.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.154.70.23-18 128 mm 120 mm 120 mm G8,5
QT 12 bis 75 W w/o transformer 12.154.75.60-18 128 mm 120 mm 120 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.164.20.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.164.35.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.164.70.23-18 128 mm 120 mm 120 mm G8,5
QT 12 bis 75 W w/o transformer 12.164.75.60-18 128 mm 120 mm 120 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.174.20.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.174.35.23-18 128 mm 120 mm 120 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.174.70.23-18 128 mm 120 mm 120 mm G8,5
QT 12 bis 75 W w/o transformer 12.174.75.60-18 128 mm 120 mm 120 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
QR-CBC 51 up to 50 W w/o transformer 12.114.50.60-18 128 mm 120 mm 120 mm GX5,3
QR 70 up to 50 W w/o transformer 12.104.50.60-18 128 mm 120 mm 120 mm BA15d
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Rec
esse
d li
gh
ts
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 151 29.05.2010 10:49:22 Uhr
152 www.spittler.com
EB 18Recessed light
- Recessed light made of magnesium and aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Luminaire head rotatable up to 355° and adjustable up to 50°
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- C/w remote ballast
- Serial safety glass pane 18.901 for HIT-CE
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 152 29.05.2010 10:49:28 Uhr
153
Retail Lighting
180170
EB 18 – rotatable and adjustableRecessed light for different lamps
Ø 180
170
Ø 188
Recessed light rotatable up to 355°, adjustable up to 50°. Magnesium and aluminium
die-cast housing, powder coated. C/w remote high frequency ballast (HF). Please order
the transformer for the halogen lamp version separately on page 240. Spherical facets
reflector made of pure aluminium, spot, medium or flood. Serial safety glass pane
18.901 for HIT-CE. Max. weight: 2.3 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.154.35.23-18 188 mm 180 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.154.70.23-18 188 mm 180 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.154.15.23-18 188 mm 180 mm 170 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.154.50.33-18 188 mm 180 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.154.10.33-18 188 mm 180 mm 170 mm GX12-1
QT 18, 60 up to 150 W 18.154.15.90-18 188 mm 180 mm 170 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.164.35.23-18 188 mm 180 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.164.70.23-18 188 mm 180 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.164.15.23-18 188 mm 180 mm 170 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.164.50.33-18 188 mm 180 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.164.10.33-18 188 mm 180 mm 170 mm GX12-1
QT 18, 60 up to 150 W 18.164.15.90-18 188 mm 180 mm 170 mm B15d
Reflector: flood - 2 x 24°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.174.35.23-18 188 mm 180 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.174.70.23-18 188 mm 180 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.174.15.23-18 188 mm 180 mm 170 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.174.50.33-18 188 mm 180 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.174.10.33-18 188 mm 180 mm 170 mm GX12-1
QT 18, 60 up to 150 W 18.174.15.90-18 188 mm 180 mm 170 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
QR 111 up to 100 W w/o transformer 18.114.10.60-18 188 mm 180 mm 170 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Rec
esse
d li
gh
ts
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 153 29.05.2010 10:49:39 Uhr
154 www.spittler.com
EB 01Recessed luminaire for effective accents
- Recessed luminaire with narrow beam angle 2x6°
- Housing made of galvanised sheet steel
- C/w remote gear box
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 154 29.05.2010 10:49:44 Uhr
155
Retail Lighting
EB 01Recessed luminaire for effective accents
172125
EB 01Recessed luminaire for effective accents
Recessed luminaire with narrow beam angle for accent lighting.
Die-cast ceiling trim, white powder-coated, adjustable without tools.
Fixing of the bezel via bayonet lock. C/w toolless exchangeable
remote gear box. Light-tight box made of galvanized steel sheet.
Spherical facets reflector made of pure aluminium. Serial clear safety
glass pane. Max. weight: 2,0 kg
Version High frequency ballast (HF) Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W 185.351.35.23 187 mm 172 mm 125 mm G12
HIT-CE 70 W 185.351.70.23 187 mm 172 mm 125 mm G12
Attachments (Please order separately!)
Safety glass with integrated direct glare protection 185.902
Ø 187
170
Ø 172
80008000800080008000
1200012000120001200012000
16000 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
h [m] E [lx] [m]
34693
8673
3855
2168
1388 2 x 6°
0,15
0,31
0,46
0,62
0,77
1,0
2,0
3,0
4,0
5,0
HIT-CE 35 W
Half-value angle 2 x 6°
Light output ratio 83%
Rec
esse
d li
gh
ts
06_verkauf_produkte_eng.indd 155 08.06.2010 11:27:09 Uhr
156 www.spittler.com
EB 02Day & Night Downlight
- Recessed downlight for two lamps in different light colours
- Light-tight housing made of sheet steel
- C/w remote gear box
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 156 29.05.2010 10:49:54 Uhr
157
Retail Lighting
206170
EB 02Day & Night Downlight
Recessed downlight for 2 HIT-CE lamps to be choosen in different
light colours (warm white and neutral white). Die-cast ceiling trim,
white powder-coated, adjustable without tools. C/w toolless ex-
changeable remote gear box. Light-tight box made of galvanized
steel sheet. Reflector made of pure aluminium. Safety glass with
ornaments. Max. weight: 3,1 kg
Version High frequency ballast (HF) Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 2 x 35 W 220.52.35.23 220 mm 210 mm 170 mm G12
HIT-CE 2 x 70 W 220.52.70.23 220 mm 206 mm 170 mm G12
Ø 210
Ø 220
170
200200200200200
300300300300300
400 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
h [m] E [lx] [m]
1049
262
117
66
422 x 40,7°
1,72
3,44
5,16
6,88
8,60
1,0
2,0
3,0
4,0
5,0
HIT-CE 2 x 35 W
Half-value angle 2 x 41°
Light output ratio 57%
Rec
esse
d li
gh
ts
06_verkauf_produkte_eng.indd 157 29.05.2010 10:50:00 Uhr
158 www.spittler.com
EB 10Recessed light
- Luminaire made of aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Luminaire head adjustable up to 60°
- Flood reflector made of matt anodised pure aluminium (Al 99.98)
- C/w remote ballast
- Serial safety glass pane 10.901 for HIT-DE
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 158 29.05.2010 10:50:03 Uhr
159
Retail Lighting
134x220
130EB 10 – adjustableRecessed light for different lamps
134 x 220
130
145 x 230
Recessed light adjustable up to 60°. Aluminium die-cast housing, powder coated. C/w
remote high frequency ballast (HF). Reflector made of matt anodised pure aluminium,
flood. Serial safety glass pane 10.901 for HIT-DE. Max. weight: 3.7 kg
Reflector: flood - 2 x 44°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
TC-TEL 18 W c/w HF ballast 10.154.18.63-18 145 x 230 mm 134 x 220 mm 130 mm GX24q
TC-TEL 26 W c/w HF ballast 10.154.26.63-18 145 x 230 mm 134 x 220 mm 130 mm GX24q
TC-TEL 32 W c/w HF ballast 10.154.32.63-18 145 x 230 mm 134 x 220 mm 130 mm GX24q
HIT-DE 70 W c/w HF ballast 10.154.70.23-18 145 x 230 mm 134 x 220 mm 130 mm RX7s
HIT-DE 150 W c/w HF ballast 10.154.15.23-18 145 x 230 mm 134 x 220 mm 130 mm RX7s
HST-CRI (SDW-T) 50 W c/w magnetic ballast*/** 10.154.50.31-18 145 x 230 mm 134 x 220 mm 130 mm PG12-1
HST-CRI (SDW-TG) 50 W c/w HF ballast 10.154.50.33-18 145 x 230 mm 134 x 220 mm 130 mm GX12-1
HST-CRI (SDW-T) 100 W c/w magnetic ballast*/** 10.154.10.31-18 145 x 230 mm 134 x 220 mm 130 mm PG12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 10.154.10.33-18 145 x 230 mm 134 x 220 mm 130 mm GX12-1
QT-DE 12 up to 200 W 10.154.20.90-18 145 x 230 mm 134 x 220 mm 130 mm R7s
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. For any other RAL colour use „-9“. * VDE applied for gear box** with stabilised discharge
Optics (You will find a detailed description on pages 234 up to 238!)
10.900 10.901 / 10.901UV 10.961 10.962 10.963 10.964
10.991 10.992 10.993 10.994 10.995
Rec
esse
d li
gh
ts
h [m] E(m) [lx] [m]
118
30
13
7
52 x 44°
2,38
4,75
7,13
9,50
11,88
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
207
52
23
13
82 x 44°
2,33
4,65
6,98
9,30
11,63
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
758
190
84
47
302 x 44°
2,17
4,33
6,50
8,67
10,84
1,0
2,0
3,0
4,0
5,0
Flood - TC-TEL 18 W
Flood - TC-TEL 32 W
Flood - HIT-DE 70 W
06_verkauf_produkte_eng.indd 159 29.05.2010 10:50:09 Uhr
160 www.spittler.com
EB 21 / 22Recessed light for asymmetrical light distribution
- Frame made of extruded aluminium profile, powder-coated in RAL 9006 with structure
- Housing made of galvanised sheet steel
- Asymmetrical reflector made of matt anodised pure aluminium (Al 99.98)
- C/w remote ballast
- Lamp change without using of tools
- Suitable for ceiling (wallwasher) and wall recessed mounting
06_verkauf_produkte_eng.indd 160 29.05.2010 10:50:13 Uhr
161
Retail Lighting
210100
EB 21Recessed light for asymmetrical light distribution
Recessed light for TC-D / TC-T lamps for asymmetrical light distribution. Extruded
aluminium profile frame, powder-coated in RAL 9006 with structure. Housing made
of galvanised sheet steel. C/w remote HF ballast. Reflector made of sand-blasted pure
aluminium. Max.weight: 2.8 kg
Version High frequency ballast (HF)Outer
dimensionCeiling cut-out
Recessed height
Socket type
TC-DEL 18 W 21.54.18.53 225 x 225 mm 210 x 210 mm 100 mm G24q
TC-TEL 26 W 21.54.26.63 225 x 225 mm 210 x 210 mm 100 mm GX24q
TC-TEL 32 W 21.54.32.63 225 x 225 mm 210 x 210 mm 100 mm GX24q
225
100
210
260
120120120120120
180180180180180
240240240240240
300 cd/klm300 cd/klm300 cd/klm300 cd/klm300 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
TC-T 26 W
Half-value angle 60 / 5°
Light output ratio 40%
210160
EB 22Recessed light for asymmetrical light distribution
Recessed light for TC-D / TC-T lamps for asymmetrical light distribution. Extruded alumini-
um profile frame, powder-coated in RAL 9006 with structure. Housing made of galvanised
sheet steel. C/w remote HF ballast. Reflector made of sand-blasted pure aluminium. Max.
weight: 2,9 kg
Version High frequency ballast (HF)Outer
dimensionCeiling cut-out
Recessed height
Socket type
TC-DEL 2 x 18 W 22.54.18.53 225 x 225 mm 210 x 210 mm 160 mm G24q
TC-TEL 2 x 26 W 22.54.26.63 225 x 225 mm 210 x 210 mm 160 mm GX24q
TC-TEL 2 x 32 W 22.54.32.63 225 x 225 mm 210 x 210 mm 160 mm GX24q
225
160
210
260
100100100100100
150150150150150
200200200200200
250 cd/klm250 cd/klm250 cd/klm250 cd/klm250 cd/klm
90°90°90°90°90°90°90°90°90°90°
60°60°60°60°60°
45°45°45°45°45°
30°30°30°30°30° 15°15°15°15°15° 15°15°15°15°15° 30°30°30°30°30°
45°45°45°45°45°
60°60°60°60°60°
TC-T 2 x 26 W
Half-value angle 55 / 15°
Light output ratio 35%
Rec
esse
d li
gh
ts
06_verkauf_produkte_eng.indd 161 29.05.2010 10:50:20 Uhr
162 www.spittler.com
AS 13Track light
- Luminaire made of aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Rotatable and adjustable
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- As surface mounted version available (ceiling rose on request)
06_verkauf_produkte_eng.indd 162 29.05.2010 10:50:24 Uhr
163
Retail Lighting
AS 13Track light for HIT-TC-CE and low voltage halogen lamps
165 Ø 95
190
50
100
Track light for HIT-TC-CE, QT12 and QR CBC 51 lamps made of die-cast aluminium,
powder-coated. Rotatable and adjustable. HIT-TC-CE c/w high frequency ballast (HF),
low voltage halogen c/w electronic transformer. Spherical facets reflector made of pure
aluminium: spot, medium and flood. Incl. universal adapter for 3-phases track. Serial
safety glass pane 12.901 for HIT-TC-CE. Max. weight: 1.2 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 13.453.20.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 13.453.35.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 13.453.70.23-18 165 x 100 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 13.453.10.63-18 165 x 100 x 190 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 13.463.20.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 13.463.35.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 13.463.70.23-18 165 x 100 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 13.463.10.63-18 165 x 100 x 190 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 13.473.20.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 13.473.35.23-18 165 x 100 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 13.473.70.23-18 165 x 100 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 13.473.10.63-18 165 x 100 x 190 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W c/w transformer 13.413.50.63-18 165 x 100 x 190 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 163 29.05.2010 10:50:34 Uhr
164 www.spittler.com
AS 13Track light for mains voltage lamps
120 Ø 95
140
Track light for QT14 and QPAR-CB 51 lamps made of aluminium die-cast, powder-coated.
Rotatable and adjustable. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Incl. universal adapter for 3-phases track. Max. weight: 0.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
QT 14 up to 75 W 13.353.75.90-18 120 x 95 x 140 mm G9
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
QT 14 up to 75 W 13.363.75.90-18 120 x 95 x 140 mm G9
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
QT 14 up to 75 W 13.373.75.90-18 120 x 95 x 140 mm G9
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QPAR-CB 51 up to 50 W 13.313.50.90-18 120 x 95 x 140 mm GZ10
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
06_verkauf_produkte_eng.indd 164 29.05.2010 10:50:55 Uhr
165
Retail Lighting
Krause Senn AG, Sihl City in Zürich, Switzerland
06_verkauf_produkte_eng.indd 165 29.05.2010 10:51:01 Uhr
166 www.spittler.com
AS 19Track light
- Luminaire made of aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Rotatable and adjustable
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- As surface mounted version available (ceiling rose on request)
06_verkauf_produkte_eng.indd 166 29.05.2010 10:51:06 Uhr
167
Retail Lighting
AS 19Track light
AS 19Track light for different lamps
165/225 Ø 155
225
50
Track light for low voltage halogen and high pressure lamps made of aluminium
die-cast, powder-coated. Rotatable and adjustable. HIT-CE and HST-CRI (SDW-TG)
c/w high frequency ballast, low voltage halogen c/w electronic transformer. Spherical
facets reflector made of pure aluminium: spot, medium and flood. Incl. universal adapter
for 3-phases track. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 2.3 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 19.453.35.23-18 165 x 155 x 275 mm G12
HIT-CE 70 W c/w HF ballast 19.453.70.23-18 165 x 155 x 275 mm G12
HIT-CE 150 W c/w HF ballast 19.453.15.23-18 225 x 155 x 225 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 19.453.50.33-18 225 x 155 x 225 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 19.453.10.33-18 225 x 155 x 225 mm GX12-1
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 19.463.35.23-18 165 x 155 x 275 mm G12
HIT-CE 70 W c/w HF ballast 19.463.70.23-18 165 x 155 x 275 mm G12
HIT-CE 150 W c/w HF ballast 19.463.15.23-18 225 x 155 x 225 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 19.463.50.33-18 225 x 155 x 225 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 19.463.10.33-18 225 x 155 x 225 mm GX12-1
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 19.473.35.23-18 165 x 155 x 275 mm G12
HIT-CE 70 W c/w HF ballast 19.473.70.23-18 165 x 155 x 275 mm G12
HIT-CE 150 W c/w HF ballast 19.473.15.23-18 225 x 155 x 225 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 19.473.50.33-18 225 x 155 x 225 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 19.473.10.33-18 225 x 155 x 225 mm GX12-1
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR111 up to 100 W c/w transformer 19.403.10.63-18 165 x 155 x 275 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 167 29.05.2010 10:51:15 Uhr
168 www.spittler.com
AS 19Track light for mains voltage lamps
150 Ø 155
175
Track light for QT18 and Q-PAR 30 lamps made of aluminium die-cast, powder-coated.
Rotatable and adjustable. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Incl. universal adapter for 3-phases track. Max. weight: 0.9 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
QT 18 up to 150 W 19.353.15.90-18 150 x 155 x 175 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
QT 18 up to 150 W 19.363.15.90-18 150 x 155 x 175 mm B15d
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
QT 18 up to 150 W 19.373.15.90-18 150 x 155 x 175 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
Q-PAR 30 up to 75 W 19.313.75.90-18 150 x 155 x 175 mm E27
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
06_verkauf_produkte_eng.indd 168 29.05.2010 10:51:27 Uhr
169
Retail Lighting
Alan Manu Motors in Hathron, Melbourne, Australia
06_verkauf_produkte_eng.indd 169 29.05.2010 10:51:27 Uhr
170 www.spittler.com
AS KA 12Gimbal track light
- Gimbal luminaire heads made of die-cast aluminium, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Luminaire heads rotatable and adjustable
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
06_verkauf_produkte_eng.indd 170 29.05.2010 10:51:32 Uhr
171
Retail Lighting
AS KA 12Gimbal track light for HIT-TC-CE and low voltage halogen lamps
Ø 120
190
320
Track light with two gimbal luminaire heads made of die-cast aluminium, powder-coated.
Rotatable and adjustable. Control gear box mounted over luminaire heads. Spherical
facets reflector made of pure aluminium: spot, medium or flood. Incl. universal adapter
for 3-phases track. Serial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 3.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.853.20.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.853.35.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.853.70.23-18 320 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.853.10.63-18 320 x 120 x 190 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.863.20.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.863.35.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.863.70.23-18 320 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.863.10.63-18 320 x 120 x 190 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.873.20.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.873.35.23-18 320 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.873.70.23-18 320 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.873.10.63-18 320 x 120 x 190 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.813.50.63-18 320 x 120 x 190 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 171 29.05.2010 10:51:41 Uhr
172 www.spittler.com
AS KA 12Gimbal track light for HIT-TC-CE and low voltage halogen lamps
Ø 120
190
180
Track light with one gimbal luminaire head made of die-cast aluminium, powder-coated.
Rotatable and adjustable. Control gear box mounted over luminaire heads. Spherical
facets reflector made of pure aluminium: spot, medium or flood. Incl. universal adapter
for 3-phases track. Serial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 1.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.753.20.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.753.35.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.753.70.23-18 180 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.753.10.63-18 180 x 120 x 190 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.763.20.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.763.35.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.763.70.23-18 180 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.763.10.63-18 180 x 120 x 190 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.773.20.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.773.35.23-18 180 x 120 x 190 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.773.70.23-18 180 x 120 x 190 mm G8,5
QT 12 up to 50 W c/w transformer 12.773.10.63-18 180 x 120 x 190 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W /w transformer 12.713.50.63-18 180 x 120 x 190 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 172 29.05.2010 10:52:01 Uhr
173
Retail Lighting
Thöny Mode AG in Davos, Switzerland
Juwelier Wempe in Düsseldorf, Germany
06_verkauf_produkte_eng.indd 173 29.05.2010 10:52:03 Uhr
174 www.spittler.com
AS 12Track light
- Luminaire made of extruded aluminium profile and die-cast aluminium, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Rotatable and adjustable
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- As surface mounted version available (ceiling rose on request)
06_verkauf_produkte_eng.indd 174 29.05.2010 10:52:09 Uhr
175
Retail Lighting
AS 12Track light for HIT-TC-CE and QT12 lamps
150
135
Ø 95
150
Track light for HIT-TC-CE and QT 12 lamps made of extruded aluminium profile and
die-cast aluminium, powder-coated. Rotatable and adjustable. HIT-TC-CE c/w high
frequency ballast, low voltage halogen c/w electronic transformer. Spherical facets
reflector made of pure aluminium: spot, medium and flood. Incl. universal adapter for
3-phases track. Serial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 1.3 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.453.20.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.453.35.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.453.70.23-18 150 x 150 x 135 mm G8,5
QT 12 up to 50 W c/w transformer 12.453.10.63-18 150 x 150 x 135 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.463.20.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.463.35.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.463.70.23-18 150 x 150 x 135 mm G8,5
QT 12 up to 50 W c/w transformer 12.463.10.63-18 150 x 150 x 135 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.473.20.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.473.35.23-18 150 x 150 x 135 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.473.70.23-18 150 x 150 x 135 mm G8,5
QT 12 up to 50 W c/w transformer 12.473.10.63-18 150 x 150 x 135 mm GY6,35
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 175 29.05.2010 10:52:19 Uhr
176 www.spittler.com
AS 18Track light
- Luminaire made of aluminium die-cast, powder-coated in RAL 9006 with structure or RAL 9016 with structure
- Rotatable and adjustable
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- As surface mounted version available (ceiling rose on request)
06_verkauf_produkte_eng.indd 176 29.05.2010 10:52:25 Uhr
177
Retail Lighting
AS 18Track light for different lamps
265
195
Ø 155
205
Track light for halogen and high pressure lamps made of extruded aluminium profile
and die-cast aluminium, powder-coated. Rotatable and adjustable. HIT-CE and HST-CRI
(SDW-TG) c/w high frequency ballast, low voltage halogen c/w electronic transformer.
Spherical facets reflector made of pure aluminium: spot, medium and flood. Incl. universal
adapter for 3-phases track. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 3.1 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.453.35.23-18 265 x 205 x 195 mm G12
HIT-CE 70 W c/w HF ballast 18.453.70.23-18 265 x 205 x 195 mm G12
HIT-CE 150 W c/w HF ballast 18.453.15.23-18 265 x 205 x 195 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.453.50.33-18 265 x 205 x 195 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.453.10.33-18 265 x 205 x 195 mm GX12-1
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.463.35.23-18 265 x 205 x 195 mm G12
HIT-CE 70 W c/w HF ballast 18.463.70.23-18 265 x 205 x 195 mm G12
HIT-CE 150 W c/w HF ballast 18.463.15.23-18 265 x 205 x 195 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.463.50.33-18 265 x 205 x 195 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.463.10.33-18 265 x 205 x 195 mm GX12-1
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.473.35.23-18 265 x 205 x 195 mm G12
HIT-CE 70 W c/w HF ballast 18.473.70.23-18 265 x 205 x 195 mm G12
HIT-CE 150 W c/w HF ballast 18.473.15.23-18 265 x 205 x 195 mm G12
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.473.50.33-18 265 x 205 x 195 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.473.10.33-18 265 x 205 x 195 mm GX12-1
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR111 up to 100 W c/w transformer 18.403.10.63-18 265 x 205 x 195 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 177 29.05.2010 10:52:35 Uhr
178 www.spittler.com
AS 23 LEDTrack light
- Luminaire made of aluminium die-cast, powder-coated in RAL 9006 with structure, RAL 9016 with structure or RAL 9005 with structure
- Rotatable and adjustable
- Spherical facets reflector made of high-polished metalised pure aluminium (Al 99.98) with 4 different beam angles
- Track light could be operated in different wattages from 33 up 50 Watt (factory setting 33, 42, 50 W).
- Deliverable in light colour 2.700 K, 3.000 K, 4.000 K and 6.000 K
- Incl. universal adapter for 3-phases track
06_verkauf_produkte_eng.indd 178 29.05.2010 10:52:39 Uhr
179
Retail Lighting
AS 23 LEDTrack light with LED technology
265126
235
Track light with high-power LED 50 W. Rotatable up to 360° and adjustable up to 90°.
Track light made of die-cast aluminium, powder-coated. Adapter integrated in gear box
with additional track interlock. Bezel with bayonet lock to allow an easy reflector and
filter exchange. High brilliant spherical facets reflector made of pure aluminium for
maximum LOR and neutral colour rendering in 4 different beam angles (spot, medium,
flood and wideflood). Track light could be operated in different wattages from 33 up 50
Watt (factory setting 33, 42, 50 W). Electronically regulated cooling with high-power
„whispering“ fan. Deliverable in light colour 2.700 K, 3.000 K, 4.000 K and 6.000 K.
Colour rendering index Ra > 82. Max. weight: 2.0 kg
Reflector: spot - 2 x 8°
Version RAL 9006 structure Length x width x height
LED 50 W, 2700 K 23.453.502-18 256 x 126 x 235 mm
LED 50 W, 3000 K 23.453.503-18 256 x 126 x 235 mm
LED 50 W, 4000 K 23.453.504-18 256 x 126 x 235 mm
LED 50 W, 6000 K 23.453.506-18 256 x 126 x 235 mm
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height
LED 50 W, 2700 K 23.463.502-18 256 x 126 x 235 mm
LED 50 W, 3000 K 23.463.503-18 256 x 126 x 235 mm
LED 50 W, 4000 K 23.463.504-18 256 x 126 x 235 mm
LED 50 W, 6000 K 23.463.506-18 256 x 126 x 235 mm
Reflector: flood - 2 x 16°
Version RAL 9006 structure Length x width x height
LED 50 W, 2700 K 23.473.502-18 256 x 126 x 235 mm
LED 50 W, 3000 K 23.473.503-18 256 x 126 x 235 mm
LED 50 W, 4000 K 23.473.504-18 256 x 126 x 235 mm
LED 50 W, 6000 K 23.473.506-18 256 x 126 x 235 mm
Reflector: wideflood - 2 x 27°
Version RAL 9006 structure Length x width x height
LED 50 W, 2700 K 23.483.502-18 256 x 126 x 235 mm
LED 50 W, 3000 K 23.483.503-18 256 x 126 x 235 mm
LED 50 W, 4000 K 23.483.504-18 256 x 126 x 235 mm
LED 50 W, 6000 K 23.483.506-18 256 x 126 x 235 mm
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“, if you require the luminaire in black (RAL 9005 structure) please use „-11“ instead of „-18“. For any other RAL colour use „-9“.
Trac
k lig
hts
h [m] E(m) [lx] [m]
14979
3745
1664
936
5992 x 8°
0,29
0,58
0,86
1,15
1,44
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
7958
1990
884
497
3182 x 12°
0,44
0,87
1,31
1,74
2,18
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5671
1418
630
354
2272 x 16°
0,57
1,13
1,70
2,26
2,83
1,0
2,0
3,0
4,0
5,0
Spot - LED 50 W, 4.000 K
Medium - LED 50 W, 4.000 K
Flood - LED 50 W, 4.000 K
h [m] E(m) [lx] [m]
2325
581
258
145
932 x 27°
1,00
1,99
2,99
3,99
4,99
1,0
2,0
3,0
4,0
5,0
Wideflood - LED 50 W, 4.000 K
06_verkauf_produkte_eng.indd 179 29.05.2010 10:52:45 Uhr
180 www.spittler.com
AS 27Track light
- Track light made of extruded aluminium profile and die-cast aluminium, powder-coated in RAL9006 structure or RAL9016 structure
- Rotatable and adjustable
- Track light suits also for high-pressure reflector lamps
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Interchangeable reflector technology
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- As surface mounted version available (ceiling rose on request)
06_verkauf_produkte_eng.indd 180 29.05.2010 10:52:49 Uhr
181
Retail Lighting
AS 27Track light for HIT-CE, HIR111 and QR111 lamps.
232Ø 126
240
155
Track light for HIT-CE, HIR111 and QR111 lamps. Track light made of extruded aluminium
profile and die-cast aluminium, powder-coated, rotatable and adjustable. HIT-CE and
HIR111 c/w high frequency ballast, QR111 c/w electronic transformer. Spherical facets
reflector made of pure aluminium, spot, medium or flood. C/w 3 phases universal adapter.
Serial safety glass pane 18.901 for HIT-CE. Max. weight: 2.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 27.45.35.2-18 232 x 155 x 240 mm G8,5
HIT-CE 70 W c/w HF ballast 27.45.70.2-18 232 x 155 x 240 mm G8,5
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 27.46.35.2-18 232 x 155 x 240 mm G8,5
HIT-CE 70 W c/w HF ballast 27.46.70.2-18 232 x 155 x 240 mm G8,5
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 27.47.35.2-18 232 x 155 x 240 mm G8,5
HIT-CE 70 W c/w HF ballast 27.47.70.2-18 232 x 155 x 240 mm G8,5
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
HIR111 20 W c/w HF ballast 27.40.20.2-18 232 x 155 x 240 mm GX8,5
HIR111 35 W c/w HF ballast 27.40.35.2-18 232 x 155 x 240 mm GX8,5
HIR111 70 W c/w HF ballast 27.40.70.2-18 232 x 155 x 240 mm GX8,5
QR111 up to 100 W c/w transformer 27.40.10.6-18 232 x 155 x 240 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Trac
k lig
hts
h [m] E(m) [lx] [m]
26360
6590
2929
1647
10542 x 6°
0,22
0,45
0,67
0,90
1,12
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
11678
2920
1298
730
4672 x 12°
0,41
0,81
1,22
1,63
2,03
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
2953
738
328
185
1182 x 24°
0,87
1,74
2,61
3,48
4,35
1,0
2,0
3,0
4,0
5,0
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 181 29.05.2010 10:53:00 Uhr
182 www.spittler.com
MIDI TRACK BOXTrack light
- Square luminaire head made of anodised aluminium. Gear box made of die-cast aluminium, powder-coated in matt grey metallic
- Rotatable and adjustable
- Gear box secured with interlock
- For reflector lamps
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
06_verkauf_produkte_eng.indd 182 29.05.2010 10:53:04 Uhr
183
Retail Lighting
MIDI TRACK BOXTrack light for HIR111 and QR111 lamps
223 118
158134
15522
8
73
Track light with square luminaire head for HIR111 and QR111 lamps. Housing made of
anodised aluminium. Bracket and gear box made of die-cast aluminium, powder-coated
in matt grey metallic. Rotatable and adjustable. Gear box secured with interlock. HIR111
version c/w electronic ballast, QR111 version c/w transformer. Beam angle acc. to lamp.
Incl. universal adapter for 3-phases track. Max. weight: 1.9 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3006045 158 x 134 x 228 mm GX8,5
HIR111 70 W c/w HF ballast 3007895 158 x 134 x 228 mm GX8,5
QR111 up to 100 W c/w transformer 3006035 158 x 134 x 228 mm G53
Trac
k lig
hts
MIDI LUM TRACK BOXPendant luminaire for track mounting for HIR111 and QR111 lamps
max
200
0
max
223
8
223 118
158134
155
73
Pendant luminaire for track mounting with square luminaire head for HIR111 and
QR111 lamps. Housing made of anodised aluminium, gear box made of die-cast
aluminium, powder-coated in grey metallic, matt. Rotatable and adjustable. Gear box
with secured interlock. HIR111 c/w electronic ballast, QR111 c/w transformer. Beam
angle according to lamp. C/w 3-phases adapter and steel wire suspension (2 m).
Max. weight: 2.1 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3006065 158 x 134 x 155 mm GX8,5
HIR111 70 W c/w HF ballast 3007905 158 x 134 x 155 mm GX8,5
QR111 up to 100 W c/w transformer 3006055 158 x 134 x 155 mm G53
06_verkauf_produkte_eng.indd 183 29.05.2010 10:53:07 Uhr
184 www.spittler.com
MIDI LUM TRACK BOX/T 400Pendant luminaire for track mounting for HIR111 and QR111 lamps
390
618
223 118
158134
155
73
Pendant luminaire for track mounting with square luminaire head for HIR111 and
QR111 lamps. Housing made of anodised aluminium, gear box made of die-cast
aluminium, powder-coated in grey metallic, matt. Rotatable and adjustable. Gear box
with secured interlock. HIR111 c/w electronic ballast, QR111 c/w transformer. Beam
angle according to lamp. C/w 3-phases adapter and pendant tube (0.4 m).
Max. weight: 2.2 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3006085 158 x 134 x 618 mm GX8,5
HIR111 70 W c/w HF ballast 3007915 158 x 134 x 618 mm GX8,5
QR111 up to 100 W c/w transformer 3006075 158 x 134 x 618 mm G53
06_verkauf_produkte_eng.indd 184 29.05.2010 10:53:12 Uhr
185
Retail Lighting
Stro
msc
hie
nen
stra
hle
r
06_verkauf_produkte_eng.indd 185 29.05.2010 10:53:12 Uhr
186 www.spittler.com
MODE R TRACK BOXTrack light
- Track light made of extruded aluminium profile and die-cast aluminium in matt grey metallic
- Rotatable and adjustable
- for HIT reflector lamps
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
- Also in white deliverable
design Luca Di Leonardo
06_verkauf_produkte_eng.indd 186 29.05.2010 10:53:19 Uhr
187
Retail Lighting
MODE R TRACK BOXTrack light for HIR111 and HIT-CE lamps
170
120
324180
Track light for HIR111 or HIT-CE lamp. Housing made of die-cast aluminium, powder-
coated in matt grey metallic. Rotatable and adjustable. C/w electronic ballast. HIT-CE
reflector made of matt pure aluminium, beam angle 2 x 30°. HIR111 beam angle acc.
to lamp. Incl. universal adapter for 3-phases track. Max. weight: 1.4 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3000645 324 x 180 x 120 mm GX8,5
HIT-CE 70 W c/w HF ballast 3000625 324 x 180 x 120 mm G12
MODE R TRACK BOXTrack light for HIR111 lamps
170
120
454180
Track light with two heads for HIR111 lamps. Housing made of die-cast aluminium,
powder-coated in matt grey metallic. Rotatable and adjustable. HIR 111 version c/w
electronic ballast. Beam angle acc. to lamp. Incl. universal adapter for 3-phases track.
Max. weight: 2.1 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3000855 454 x 180 x 120 mm GX8,5
Trac
k lig
hts
06_verkauf_produkte_eng.indd 187 29.05.2010 10:53:24 Uhr
188 www.spittler.com
MODE 20 TRACK BOXTrack light
- Wall washer made of extruded aluminium profile and die-cast aluminium, powder-coated in matt grey metallic
- Rotatable and adjustable wallwasher
- For plane illumination
- C/w frosted glass
- Incl. universal adapter for 3-phases track
- Easy maintenance by removing the two screws lateral and rotating the upper diffuser downwards
- Luminaire also available in white on request
design Luca Di Leonardo
06_verkauf_produkte_eng.indd 188 29.05.2010 10:53:30 Uhr
189
Retail Lighting
MODE 20 TRACK BOXWall washer for TC-TEL and HIT-CE lamps
170
138
120
196
216
433
58
99
Wall washer for TC-TEL and HIT-CE lamps. Housing made of die-cast aluminium,
powder-coated in matt grey metallic. Rotatable and adjustable. TC-TEL and HIT-CE
version c/w electronic ballast. Incl. universal adapter for 3-phases track and frosted glass.
Max. weight: 1.7 kg
Version grey metallic, matt Length x width x height Socket type
TC-TEL 26 W c/w HF ballast 3000275 433 x 99 x 196 mm GX24q
HIT-CE 35 W c/w HF ballast 3000295 433 x 99 x 196 mm G12
Trac
k lig
hts
06_verkauf_produkte_eng.indd 189 29.05.2010 10:53:35 Uhr
190 www.spittler.com
MODE TRACKTrack light
- Wall washer made of extruded aluminium profile and die-cast aluminium, powder-coated in matt grey metallic
- Rotatable and adjustable wallwasher
- For plane illumination
- Incl. universal adapter for 3-phases track
- Easy maintenance by removing the two screws lateral and rotating the upper diffuser downwards
- Luminaire also available in white on request
design Luca Di Leonardo
06_verkauf_produkte_eng.indd 190 29.05.2010 10:53:39 Uhr
191
Retail Lighting
MODE 60 B TRACKWallwasher with double light emissionfor T5 lamps with frosted safety glass.
138
191
59058
109
Wallwasher with double light emissionfor T5 lamps with frosted safety glass. Housing
made of die-cast aluminium, powder-coated in grey metallic, matt. Rotatable and
adjustable. C/w 3 phases universal adapter. Max. weight: 2.8 kg
Version grey metallic, matt Length x width x height Socket type
T5 2 x 24 W with HF ballast 3000765 590 x 58 x 191 mm G5
MODE 60 M TRACKWallwasher for T5 lamps with clear safety glass.
138
191
59058
109
Wallwasher for T5 lamps with clear safety glass. Housing made of die-cast aluminium,
powder-coated in grey metallic, matt. Rotatable and adjustable. C/w 3 phases universal
adapter. Max. weight: 2.3 kg
Version grey metallic, matt Length x width x height Socket type
T5 2 x 24 W with HF ballast 3000725 590 x 58 x 191 mm G5
Trac
k lig
hts
06_verkauf_produkte_eng.indd 191 29.05.2010 10:53:43 Uhr
192 www.spittler.com
SH 12Shelf luminaire
- Shelf luminaire made of extruded aluminium profile and die-cast aluminium powder-coated in RAL 9006 with structure or white with structure
- Luminaire head adjustable
- Spherical facets reflector made of high-polished anodised pure alu- minium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Installation is effected by a support profile (other assembling versions on request)
06_verkauf_produkte_eng.indd 192 29.05.2010 10:53:43 Uhr
193
Retail Lighting
SH 12Shelf luminaire for low voltage halogen and metal halide lamps
Shelf luminaire for low voltage halogen QR-CBC 51 and metal halide HIT-TC-CE lamps.
Luminaire head made of extruded aluminium profile and die-cast aluminium, powder-coa-
ted. Adjustable. HIT-TC-CE c/w high frequency ballast, low voltage halogen c/w electronic
transformer. Spherical facets reflector made of pure aluminium: spot, medium and flood.
Serial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 3.5 kg
710
220
150
180
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 35 W c/w HF ballast 12.953.35.23-18 710 x 150 x 220 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.953.70.23-18 710 x 150 x 220 mm G8,5
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 35 W c/w HF ballast 12.963.35.23-18 710 x 150 x 220 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.963.70.23-18 710 x 150 x 220 mm G8,5
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 35 W c/w HF ballast 12.973.35.23-18 710 x 150 x 220 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.973.70.23-18 710 x 150 x 220 mm G8,5
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.903.50.63-18 710 x 150 x 220 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“. For any other RAL colour use „-9“.
Attachments (Please order separately!)
Support profile, 650 mm length, in RAL 9006 structure 12.650-18
Support profile, 1000 mm length, in RAL 9006 structure 12.1000-18
Optics (You will find a detailed description on pages 234 up to 238!)
12.964 12.991 12.992 12.993 12.994 12.995
12.900 12.901UV 12.937 12.961 12.962 12.963
Shel
f lu
min
aire
s
h [m] E(m) [lx] [m]
27315
6829
3035
1707
10932 x 6°
0,23
0,46
0,68
0,91
1,14
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
9444
2361
1049
590
3782 x 12°
0,44
0,87
1,31
1,74
2,18
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
3084
771
343
193
1232 x 24°
0,98
1,96
2,94
3,92
4,90
1,0
2,0
3,0
4,0
5,0
Spot - HIT-TC-CE 70 W
Medium - HIT-TC-CE 70 W
Flood - HIT-TC-CE 70 W
06_verkauf_produkte_eng.indd 193 29.05.2010 10:53:50 Uhr
194 www.spittler.com
MODE R WALL BOXWall luminaire
- Track light made of extruded aluminium profile and die-cast aluminium in matt grey metallic
- Adjustable luminaire heads
- Lamp change without using of tools
- Luminaire also available in white on request
design Luca Di Leonardo
06_verkauf_produkte_eng.indd 194 29.05.2010 10:53:53 Uhr
195
Retail Lighting
MODE R WALL BOXWall luminaire for HIR111, QR111 and HIT-CE lamps
170
324180
120
Wall mounted luminaire for HIR111, QR111 and HIT-CE lamp. Luminaire and gear box
made of die-cast aluminium, powder-coated in grey metallic, matt. Adjustable luminaire
head. HIT-CE reflector made of matt pure aluminium. HIR111 and QR111 with beam angle
according to lamp. Max. weight: 1.3 kg
Version grey metallic, matt Length x width x height Socket type
HIT-CE 70 W c/w HF ballast 3000015 324 x 180 x 120 mm mm G12
HIR111 35 W c/w HF ballast 3000035 324 x 180 x 120 mm mm GX8,5
QR111 up to 100 W c/w transformer 3000045 324 x 180 x 120 mm mm G53
MODE R WALL BOXWall luminaire for HIR111 and QR111 lamps
170
454180
120
Wall mounted luminaire with two luminaire heads for HIR111 and QR111 lamps.
Luminaire and gear box made of die-cast aluminium, powder-coated in grey metallic,
matt. Adjustable luminaire heads. Beam angle according to lamp. Max. weight: 2.0 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3001215 454 x 180 x 120 mm mm GX8,5
QR111 up to 100 W c/w transformer 3001225 454 x 180 x 120 mm mm G53
Wal
lum
inai
res
06_verkauf_produkte_eng.indd 195 29.05.2010 10:53:56 Uhr
196 www.spittler.com
MIDI WALLWall luminaire
- Square luminaire head made of anodised aluminium
- Gear box made of die-cast aluminium, powder-coated in matt grey metallic
- Luminaire head adjustable
- For reflector lamps
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 196 29.05.2010 10:54:02 Uhr
197
Retail Lighting
MIDI WALLWall mounted luminaire for HIR111 lamps
223
118
158
134
155
228
73
Wall mounted luminaire for HIR111 lamps. Housing made of anodised aluminium and
die-cast aluminium, powder-coated in grey metallic, matt. Adjustable luminaire head.
Beam angle according to lamp. Max. weight: 2.0 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3005925 158 x 228 x 223 mm GX8,5
HIR111 70 W c/w HF ballast 3007855 158 x 228 x 223 mm GX8,5
MIDI WALL/RWall mounted luminaire for QR111 lamps
158
134
155
206
51
ø 11
5
Wall mounted luminaire for QR111 lamps. Housing made of anodised aluminium and
die-cast aluminium, powder-coated in grey metallic, matt. Adjustable luminaire head.
Beam angle according to lamp. Max. weight: 0.7 kg
Version grey metallic, matt Length x width x height Socket type
QR111 up to 100 W c/w transformer 300593 158 x 206 x 134 mm G53
Wal
l lu
min
aire
s
06_verkauf_produkte_eng.indd 197 29.05.2010 10:54:07 Uhr
198 www.spittler.com
KR 12 EBGimbal recessed luminaire
- Bezel made of sheet steel, powder-coated
- Gimbal luminaire head made of extruded aluminium profile and die-cast aluminium, powder-coated
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 198 29.05.2010 10:54:12 Uhr
199
Retail Lighting
140130/170
KR 12 EBGimbal recessed luminaire
Ø 150
130/
170
Ø 150
Round gimbal recessed luminaire. Bezel made of sheet steel, head made of extruded alu-
minium profile and die-cast aluminium, powder-coated. HIT-TC-CE and HST-CRI (SDW-TG)
incl. electronic ballast, low voltage halogen incl. electronic transformer. Serial safety glass
12.901 for HIT-TC-CE. Max. weight: 1.3 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5051.20.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5051.35.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5051.70.2-18 150 mm 140 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5051.50.3-18 150 mm 140 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5051.10.3-18 150 mm 140 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5051.75.6-18 150 mm 140 mm 130 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5061.20.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5061.35.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5061.70.2-18 150 mm 140 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 Wc/w HF ballast* 12.5061.50.3-18 150 mm 140 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5061.10.3-18 150 mm 140 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5061.75.6-18 150 mm 140 mm 130 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5071.20.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5071.35.2-18 150 mm 140 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5071.70.2-18 150 mm 140 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5071.50.3-18 150 mm 140 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5071.10.3-18 150 mm 140 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5071.75.6-18 150 mm 140 mm 130 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5001.50.6-18 150 mm 140 mm 130 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.* can‘t be used with optics
Optics (You will find a detailed description on pages 234 up to 238!)
12.901 12.900 12.901UV 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Gim
bal
rec
esse
d lu
min
aire
s
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 199 29.05.2010 10:54:22 Uhr
200 www.spittler.com
KR 18 EBGimbal recessed luminaire
- Bezel made of sheet steel, powder-coated
- Gimbal luminaire head made of extruded aluminium profile and die-cast aluminium, powder-coated
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 200 29.05.2010 10:54:26 Uhr
201
Retail Lighting
206155
KR 18 EBGimbal recessed luminaire
155
Ø 220
Ø 220
Round gimbal recessed luminaire. Bezel made of sheet steel, head made of extruded
aluminium profile and die-cast aluminium, powder-coated. HIT-CE and HST-CRI (SDW-TG)
incl. electronic ballast, low voltage halogen incl. electronic transformer. Serial safety glass
18.901 for HIT-CE. Max. weight: 1.8 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.2251.35.2-18 220 mm 206 mm 155 mm G12
HIT-CE 70 W c/w HF ballast 18.2251.70.2-18 220 mm 206 mm 155 mm G12
HIT-CE 150 W c/w HF ballast 18.2251.15.2-18 220 mm 206 mm 155 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.2251.10.3-18 220 mm 206 mm 155 mm GX12-1
QT 18 up to 150 W 18.2251.15.9-18 220 mm 206 mm 155 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.2261.35.2-18 220 mm 206 mm 155 mm G12
HIT-CE 70 W c/w HF ballast 18.2261.70.2-18 220 mm 206 mm 155 mm G12
HIT-CE 150 W c/w HF ballast 18.2261.15.2-18 220 mm 206 mm 155 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.2261.10.3-18 220 mm 206 mm 155 mm GX12-1
QT 18 up to 150 W 18.2261.15.9-18 220 mm 206 mm 155 mm B15d
Reflector: flood - 2 x 24°
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.2271.35.2-18 220 mm 206 mm 155 mm G12
HIT-CE 70 W c/w HF ballast 18.2271.70.2-18 220 mm 206 mm 155 mm G12
HIT-CE 150 W c/w HF ballast 18.2271.15.2-18 220 mm 206 mm 155 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.2271.10.3-18 220 mm 206 mm 155 mm GX12-1
QT 18 up to 150 W 18.2271.15.9-18 220 mm 206 mm 155 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Diameter Ceiling cut-out Recessed height Socket type
QR111 up to 100 W c/w transformer 18.2201.10.6-18 220 mm 206 mm 155 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.901 18.900 18.901UV 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Gim
bal
rec
esse
d lu
min
aire
s
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 201 29.05.2010 10:54:36 Uhr
202 www.spittler.com
KR 23 LEDGimbal recessed luminaire
- Bezel and housing made of die-cast aluminium, powder-coated in RAL 9016 structure
- Spherical facets reflector made of high-polished metalised pure alu- minium (Al 99.98) with 4 different beam angles
- Track light could be operated in different wattages from 33 up 50 Watt (factory setting 33, 42, 50 W).
- Deliverable in light colour 2.700 K, 3.000 K, 4.000 K and 6.000 K
06_verkauf_produkte_eng.indd 202 29.05.2010 10:54:41 Uhr
203
Retail Lighting
KR 23 LEDGimbal recessed luminaire with LED technology
Ø 179
117
Ø 192
Round gimbal recessed luminaire with high-power LED 50 W. Bezel and housing made
of die-cast aluminium, powder-coated. Bezel with bayonet lock to allow an easy reflector
and filter exchange. High brilliant spherical facets reflector made of pure aluminium for
maximum LOR and neutral colour rendering in 4 different beam angles (spot, medium,
flood and wideflood). Remote gear box with driver and Wago plug connection. Track light
could be operated in different wattages from 33 up 50 Watt (factory setting 33, 42, 50
W). Electronically regulated cooling with high-power „whispering“ fan. Deliverable in light
colour 2.700 K, 3.000 K, 4.000 K and 6.000 K. Colour rendering index Ra > 82.
Max. weight: 2.0 kg
Reflector: spot - 2 x 8°
Version RAL 9016 structure Diameter Ceiling cut-out Recessed height
LED 50 W, 2700 K 23.254.502 192 mm 179 mm 117 mm
LED 50 W, 3000 K 23.254.503 192 mm 179 mm 117 mm
LED 50 W, 4000 K 23.254.504 192 mm 179 mm 117 mm
LED 50 W, 6000 K 23.254.506 192 mm 179 mm 117 mm
Reflector: medium - 2 x 12°
Version RAL 9016 structure Diameter Ceiling cut-out Recessed height
LED 50 W, 2700 K 23.264.502 192 mm 179 mm 117 mm
LED 50 W, 3000 K 23.264.503 192 mm 179 mm 117 mm
LED 50 W, 4000 K 23.264.504 192 mm 179 mm 117 mm
LED 50 W, 6000 K 23.264.506 192 mm 179 mm 117 mm
Reflector: flood - 2 x 16°
Version RAL 9016 structure Diameter Ceiling cut-out Recessed height
LED 50 W, 2700 K 23.274.502 192 mm 179 mm 117 mm
LED 50 W, 3000 K 23.274.503 192 mm 179 mm 117 mm
LED 50 W, 4000 K 23.274.504 192 mm 179 mm 117 mm
LED 50 W, 6000 K 23.274.506 192 mm 179 mm 117 mm
Reflector: wideflood - 2 x 27°
Version RAL 9016 structure Diameter Ceiling cut-out Recessed height
LED 50 W, 2700 K 23.284.502 192 mm 179 mm 117 mm
LED 50 W, 3000 K 23.284.503 192 mm 179 mm 117 mm
LED 50 W, 4000 K 23.284.504 192 mm 179 mm 117 mm
LED 50 W, 6000 K 23.284.506 192 mm 179 mm 117 mm
Gim
bal
rec
esse
d lu
min
aire
s
179117
h [m] E(m) [lx] [m]
14979
3745
1664
936
5992 x 8°
0,29
0,58
0,86
1,15
1,44
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
7958
1990
884
497
3182 x 12°
0,44
0,87
1,31
1,74
2,18
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5671
1418
630
354
2272 x 16°
0,57
1,13
1,70
2,26
2,83
1,0
2,0
3,0
4,0
5,0
Spot - LED 50 W, 4.000 K
Medium - LED 50 W, 4.000 K
Flood - LED 50 W, 4.000 K
h [m] E(m) [lx] [m]
2325
581
258
145
932 x 27°
1,00
1,99
2,99
3,99
4,99
1,0
2,0
3,0
4,0
5,0
Wideflood - LED 50 W, 4.000 K
06_verkauf_produkte_eng.indd 203 29.05.2010 10:54:46 Uhr
204 www.spittler.com
KA 12 EBGimbal recessed luminaire system
- Recessed frame made of extruded aluminium profile, powder-coated
- Gimbal luminaire heads made of extruded aluminium profile and die-cast aluminium, powder-coated
- Individual adjustable luminaire heads
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Light tight housing and front cover as option
- Compatible suspended version
06_verkauf_produkte_eng.indd 204 29.05.2010 10:54:52 Uhr
205
Retail Lighting
160170
KA 12 EB – 1-field moduleGimbal recessed luminaire system
175
175
130/
170
175
Recessed luminaire with one gimbal luminaire head. Frame made of extruded aluminium
profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-TC-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Serial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 1.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5151.20.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5151.35.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5151.70.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5151.50.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG)100 W c/w HF ballast* 12.5151.10.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5151.75.6-18 175 x 175 mm 160 x 160 mm 130 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5161.20.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5161.35.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5161.70.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5161.50.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5161.10.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5161.75.6-18 175 x 175 mm 160 x 160 mm 130 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5171.20.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5171.35.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5171.70.2-18 175 x 175 mm 160 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5171.50.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5171.10.3-18 175 x 175 mm 160 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5171.75.6-18 175 x 175 mm 160 x 160 mm 130 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5101.50.6-18 175 x 175 mm 160 x 160 mm 130 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.* can‘t be used with optics
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 12.541.1.1.9-18
Light tight housing, black 12.501.1.1K
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Gim
bal
rec
esse
d lu
min
aire
s
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 205 29.05.2010 10:55:02 Uhr
206 www.spittler.com
365x160
170KA 12 EB – 2-fields moduleGimbal recessed luminaire system
175
380
175
130/
170
Recessed luminaire with two gimbal luminaire heads. Frame made of extruded alumini-
um profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-TC-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium:
spot, medium and flood. Serial safety glass pane 12.901 for HIT-TC-CE.
Max. weight: 3.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5152.20.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5152.35.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5152.70.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5152.50.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5152.10.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5152.75.6-18 380 x 175 mm 365 x 160 mm 130 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5162.20.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5162.35.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5162.70.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5162.50.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5162.10.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5162.75.6-18 380 x 175 mm 365 x 160 mm 130 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5172.20.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5172.35.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5172.70.2-18 380 x 175 mm 365 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5172.50.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5172.10.3-18 380 x 175 mm 365 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5172.75.6-18 380 x 175 mm 365 x 160 mm 130 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5102.50.6-18 380 x 175 mm 365 x 160 mm 130 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.* can‘t be used with optics
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 12.541.1.2.9-18
Light tight housing, black 12.501.1.2K
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
06_verkauf_produkte_eng.indd 206 29.05.2010 10:55:08 Uhr
207
Retail Lighting
535x160
170KA 12 EB – 3-fields frameGimbal recessed luminaire system
175
550
175
130/
170
Recessed luminaire with three gimbal luminaire heads. Frame made of extruded alumini-
um profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-TC-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium:
spot, medium and flood. Serial safety glass pane 12.901 for HIT-TC-CE.
Max. weight: 4.6 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5153.20.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5153.35.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5153.70.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5153.50.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5153.10.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5153.75.6-18 550 x 175 mm 535 x 160 mm 130 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5163.20.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5163.35.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5163.70.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5163.50.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5163.10.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5163.75.6-18 550 x 175 mm 535 x 160 mm 130 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5173.20.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5173.35.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5173.70.2-18 550 x 175 mm 535 x 160 mm 130 mm G8,5
HST-CRI (SDW-TG) 50 W c/w HF ballast* 12.5173.50.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast* 12.5173.10.3-18 550 x 175 mm 535 x 160 mm 170 mm GX12-1
QT 12 up to 75 W c/w transformer 12.5173.75.6-18 550 x 175 mm 535 x 160 mm 130 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5103.50.6-18 550 x 175 mm 535 x 160 mm 130 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.* can‘t be used with optics
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 12.541.1.3.9-18
Light tight housing, black 12.501.1.3K
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Gim
bal
rec
esse
d lu
min
aire
s
06_verkauf_produkte_eng.indd 207 29.05.2010 10:55:15 Uhr
208 www.spittler.com
KA 18 EBGimbal recessed luminaire system
- Recessed frame made of extruded aluminium profile, powder-coated
- Gimbal luminaire heads made of extruded aluminium profile and die-cast aluminium, powder-coated
- Individual adjustable luminaire heads
- Spherical facets reflector made of high-polished anodised pure alu- minium (Al 99.98) with 3 different beam angles
- Lamp change without using of tools
- Compatible suspended version
06_verkauf_produkte_eng.indd 208 29.05.2010 10:55:21 Uhr
209
Retail Lighting
230170
KA 18 EB – 1-field moduleGimbal recessed luminaire system
245
245
170
245
Recessed luminaire with one gimbal luminaire head. Frame made of extruded aluminium
profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium:
spot, medium and flood. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 2.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5151.35.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5151.70.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.5151.15.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5151.10.3-18 245 x 245 mm 230 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5151.15.9-18 245 x 245 mm 230 x 230 mm 170 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5161.35.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5161.70.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.5161.15.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5161.10.3-18 245 x 245 mm 230 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5161.15.9-18 245 x 245 mm 230 x 230 mm 170 mm B15d
Reflector: flood - 2 x 24°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5171.35.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5171.70.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HIT-CE 150 W c/w HF ballast 18.5171.15.2-18 245 x 245 mm 230 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5171.10.3-18 245 x 245 mm 230 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5171.15.9-18 245 x 245 mm 230 x 230 mm 170 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR111 up to 100 W c/w transformer 18.5101.10.6-18 245 x 245 mm 230 x 230 mm 170 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 18.541.1.1.9-18
Light tight housing, black 18.501.1.1K
Optics (You will find a detailed description on pages 234 up to 240!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Gim
bal
rec
esse
d lu
min
aire
s
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 209 29.05.2010 10:55:31 Uhr
210 www.spittler.com
455x230
170KA 18 EB – 2-fields moduleGimbal recessed luminaire system
170
245
245
470
Recessed luminaire with two gimbal luminaire heads. Frame made of extruded aluminium
profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium:
spot, medium and flood. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 4.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5152.35.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5152.70.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5152.10.3-18 470 x 245 mm 455 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5152.15.9-18 470 x 245 mm 455 x 230 mm 170 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5162.35.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5162.70.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5162.10.3-18 470 x 245 mm 455 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5162.15.9-18 470 x 245 mm 455 x 230 mm 170 mm G12
Reflector: flood - 2 x 24°Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5172.35.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5172.70.2-18 470 x 245 mm 455 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5172.10.3-18 470 x 245 mm 455 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5172.15.9-18 470 x 245 mm 455 x 230 mm 170 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR111 up to 100 W c/w transformer 18.5102.10.6-18 470 x 245 mm 455 x 230 mm 170 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 18.541.1.2.9-18
Light tight housing, black 18.501.1.2K
Optics (You will find a detailed description on pages 234 up to 240!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
06_verkauf_produkte_eng.indd 210 29.05.2010 10:55:38 Uhr
211
Retail Lighting
680x230
170KA 18 EB – 3-fields frameGimbal recessed luminaire system
170
245
245
695
Recessed luminaire with three gimbal luminaire heads. Frame made of extruded aluminium
profile, luminaire head made of extruded aluminium profile and die-cast aluminium,
powder-coated. HIT-CE and HST-CRI (SDW-TG) c/w high frequency ballast, low voltage
halogen c/w electronic transformer. Spherical facets reflector made of pure aluminium:
spot, medium and flood. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 5.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5153.35.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5153.70.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5153.10.3-18 695 x 245 mm 680 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5153.15.9-18 695 x 245 mm 680 x 230 mm 170 mm B15d
Reflector: medium - 2 x 12°
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5163.35.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5163.70.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5163.10.3-18 695 x 245 mm 680 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5163.15.9-18 695 x 245 mm 680x 230 mm 170 mm B15d
Reflector: flood - 2 x 24°Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
HIT-CE 35 W c/w HF ballast 18.5173.35.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HIT-CE 70 W c/w HF ballast 18.5173.70.2-18 695 x 245 mm 680 x 230 mm 170 mm G12
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5173.10.3-18 695 x 245 mm 680 x 230 mm 170 mm GX12-1
QT 18 up to 150 W 18.5173.15.9-18 695 x 245 mm 680 x 230 mm 170 mm B15d
Reflector: accord. to lamp bulb
Version RAL 9006 structure Outer dimension Ceiling cut-out Recessed height Socket type
QR111 up to 100 W c/w transformer 18.5103.10.6-18 695 x 245 mm 680 x 230 mm 170 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.
Attachments (Please order separately!)
Front cover, in RAL 9006 structure 18.541.1.3.9-18
Light tight housing, black 18.501.1.3K
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Gim
bal
rec
esse
d lu
min
aire
s
06_verkauf_produkte_eng.indd 211 29.05.2010 10:55:45 Uhr
212 www.spittler.com
KA 12 ABGimbal suspended luminaire system
- Frame made of aluminium profile, powder-coated
- Gimbal luminaire heads made of extruded aluminium profile and die-cast aluminium, powder-coated
- Individual adjustable luminaire heads
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Lamp change without using of tools
- Compatible recessed version
06_verkauf_produkte_eng.indd 212 29.05.2010 10:55:51 Uhr
213
Retail Lighting
KA 12 AB – 3-fields frameGimbal suspended luminaire system
115
200
200
415
Suspended luminaire with two gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. HIT-TC-CE c/w high frequency ballast, low voltage halogen
c/w electronic transformer. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Incl. wire suspension (1,5 m) and transparent mains supply.
erial safety glass pane 12.901 for HIT-TC-CE. Max. weight: 2.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5352.20.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5352.35.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5352.70.2-18 415 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5352.75.6-18 415 x 200 x 115 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5362.20.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5362.35.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5362.70.2-18 415 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5362.75.6-18 415 x 200 x 115 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5372.20.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5372.35.2-18 415 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5372.70.2-18 415 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5372.75.6-18 415 x 200 x 115 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5302.50.6-18 415 x 200 x 160 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Gim
bal
su
spen
ded
lum
inai
res
h [m] E(m) [lx] [m]
19660
4915
2184
1229
7862 x 6°
0,20
0,41
0,61
0,81
1,02
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
5205
1301
578
325
2082 x 12°
0,41
0,82
1,23
1,64
2,05
1,0
2,0
3,0
4,0
5,0
h [m] E(m) [lx] [m]
1581
395
176
99
632 x 24°
1,0
2,0
3,0
4,0
5,0
0,98
1,95
2,93
3,90
4,88
Spot - HIT-TC-CE 35 W
Medium - HIT-TC-CE 35 W
Flood - HIT-TC-CE 35 W
06_verkauf_produkte_eng.indd 213 29.05.2010 10:56:00 Uhr
214 www.spittler.com
KA 12 AB – 4-fields moduleGimbal suspended luminaire system
155
200
200
550
Suspended luminaire with two gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. C/w high frequency ballast. Spherical facets reflector made
of pure aluminium: spot, medium and flood. Incl. wire suspension (1.5 m) and transparent
mains supply. Max. weight: 4.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 12.5452.50.3-18 550 x 200 x 155 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 12.5452.10.3-18 550 x 200 x 155 mm GX12-1
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 12.5462.50.3-18 550 x 200 x 155 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 12.5462.10.3-18 550 x 200 x 155 mm GX12-1
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 12.5472.50.3-18 550 x 200 x 155 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 12.5472.10.3-18 550 x 200 x 155 mm GX12-1
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
06_verkauf_produkte_eng.indd 214 29.05.2010 10:56:01 Uhr
215
Retail Lighting
KA 12 AB – 5-fields-moduleGimbal suspended luminaire system
115
200
200
685
Suspended luminaire with three gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. HIT-TC-CE c/w high frequency ballast, low voltage halogen
c/w electronic transformer. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Incl. wire suspension (1.5 m) and transparent mains supply. Serial
safety glass pane 12.901 for HIT-TC-CE. Max. weight: 5.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5553.20.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5553.35.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5553.70.2-18 685 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5553.75.6-18 685 x 200 x 115 mm GY6,35
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5563.20.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5563.35.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5563.70.2-18 685 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5563.75.6-18 685 x 200 x 115 mm GY6,35
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-TC-CE 20 W c/w HF ballast 12.5573.20.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 35 W c/w HF ballast 12.5573.35.2-18 685 x 200 x 115 mm G8,5
HIT-TC-CE 70 W c/w HF ballast 12.5573.70.2-18 685 x 200 x 115 mm G8,5
QT 12 up to 75 W c/w transformer 12.5573.75.6-18 685 x 200 x 115 mm GY6,35
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR-CBC 51 up to 50 W c/w transformer 12.5503.50.6-18 685 x 200 x 115 mm GX5,3
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
12.900 12.901 / 12.901UV 12.937 12.961 12.962 12.963
12.964 12.991 12.992 12.993 12.994 12.995
Gim
bal
su
spen
ded
lum
inai
res
06_verkauf_produkte_eng.indd 215 29.05.2010 10:56:08 Uhr
216 www.spittler.com
KA 18 ABGimbal suspended luminaire system
- Frame made of aluminium profile, powder-coated
- Gimbal luminaire heads made of extruded aluminium profile and die-cast aluminium, powder-coated
- Individual adjustable luminaire heads
- Spherical facets reflector made of high-polished anodised pure aluminium (Al 99.98) with 3 different beam angles
- C/w assembled transparent mains supply wired ready for connection
- Y-wire steel wire suspension (1,5 m), continuously adjustable
- Lamp change without using of tools
- Compatible recessed version
06_verkauf_produkte_eng.indd 216 29.05.2010 10:56:14 Uhr
217
Retail Lighting
KA 18 AB – 3-fields frameGimbal suspended luminaire system
160
270
625
270
Suspended luminaire with two gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. HIT-CE c/w high frequency ballast, low voltage halogen c/w
electronic transformer. Spherical facets reflector made of pure aluminium: spot, medium
and flood. Incl. wire suspension (1.5 m) and transparent mains supply. Serial safety glass
pane 18.901 for HIT-CE. Max. weight: 4.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5352.35.2-18 625 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5352.70.2-18 625 x 270 x 160 mm G12
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5362.35.2-18 625 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5362.70.2-18 625 x 270 x 160 mm G12
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5372.35.2-18 625 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5372.70.2-18 625 x 270 x 160 mm G12
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR111 up to 100 W c/w transformer 18.5302.10.6-18 625 x 270 x 160 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Gim
bla
l su
spen
ded
lum
inai
res
h [m] E(m) [lx] [m]
48020
12005
5336
3001
19212 x 6°
1,0
2,0
3,0
4,0
5,0
0,20
0,39
0,59
0,78
0,98
h [m] E(m) [lx] [m]
14217
3554
1580
889
5692 x 12°
1,0
2,0
3,0
4,0
5,0
0,45
0,90
1,35
1,80
2,25
h [m] E(m) [lx] [m]
3675
919
408
230
1472 x 24°
1,0
2,0
3,0
4,0
5,0
0,85
1,71
2,56
3,41
4,27
Spot - HIT-CE 70 W
Medium - HIT-CE 70 W
Flood - HIT-CE 70 W
06_verkauf_produkte_eng.indd 217 29.05.2010 10:56:23 Uhr
218 www.spittler.com
KA 18 AB – 4-fields moduleGimbal suspended luminaire system
160
270
270
830
Suspended luminaire with two gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. C/w high frequency ballast. Spherical facets reflector made
of pure aluminium: spot, medium and flood. Incl. wire suspension (1.5 m) and transparent
mains supply. Serial safety glass pane 18.901 for HIT-CE. Max. weight: 6.0 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.5452.50.3-18 830 x 270 x 160 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5452.10.3-18 830 x 270 x 160 mm GX12-1
HIT-CE 150 W c/w HF ballast 18.5452.15.2-18 830 x 270 x 160 mm G12
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.5462.50.3-18 830 x 270 x 160 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5462.10.3-18 830 x 270 x 160 mm GX12-1
HIT-CE 150 W c/w HF ballast 18.5462.15.2-18 830 x 270 x 160 mm G12
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HST-CRI (SDW-TG) 50 W c/w HF ballast 18.5472.50.3-18 830 x 270 x 160 mm GX12-1
HST-CRI (SDW-TG) 100 W c/w HF ballast 18.5472.10.3-18 830 x 270 x 160 mm GX12-1
HIT-CE 150 W c/w HF ballast 18.5472.15.2-18 830 x 270 x 160 mm G12
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
06_verkauf_produkte_eng.indd 218 29.05.2010 10:56:30 Uhr
219
Retail Lighting
KA 18 AB – 5-fields-moduleGimbal suspended luminaire system
160
270
270
1035
Suspended luminaire with three gimbal luminaire heads. Frame made of extruded
aluminium profile, luminaire heads made of extruded aluminium profile and die-cast
aluminium, powder-coated. HIT-CE c/w high frequency ballast, low voltage halogen
c/w electronic transformer. Spherical facets reflector made of pure aluminium: spot,
medium and flood. Incl. wire suspension (1.5 m) and transparent mains supply. Serial
safety glass pane 18.901 for HIT-CE. Max. weight: 7.5 kg
Reflector: spot - 2 x 6°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5553.35.2-18 1035 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5553.70.2-18 1035 x 270 x 160 mm G12
Reflector: medium - 2 x 12°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5563.35.2-18 1035 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5563.70.2-18 1035 x 270 x 160 mm G12
Reflector: flood - 2 x 24°
Version RAL 9006 structure Length x width x height Socket type
HIT-CE 35 W c/w HF ballast 18.5573.35.2-18 1035 x 270 x 160 mm G12
HIT-CE 70 W c/w HF ballast 18.5573.70.2-18 1035 x 270 x 160 mm G12
Reflector: accord. to lamp bulb
Version RAL 9006 structure Length x width x height Socket type
QR111 up to 100 W c/w transformer 18.5503.10.6-18 1035 x 270 x 160 mm G53
If you require the luminaire in white (RAL 9016 structure) please use „-10“ instead of „-18“.For any other RAL colour use „-9“.
Optics (You will find a detailed description on pages 234 up to 238!)
18.900 18.901 / 18.901UV 18.937 18.961 18.962 18.963
18.964 18.991 18.992 18.993 18.994 18.995
Gim
bal
su
spen
ded
lum
inai
res
06_verkauf_produkte_eng.indd 219 29.05.2010 10:56:36 Uhr
220 www.spittler.com
Hotel am See in Salzgitter, Germany
Pineider in Milano, Italy (photo by Germano Borrelli)
06_verkauf_produkte_eng.indd 220 29.05.2010 10:57:01 Uhr
221
Retail Lighting
Hotel am See in Salzgitter, Germany
06_verkauf_produkte_eng.indd 221 29.05.2010 10:57:03 Uhr
222 www.spittler.com
MIDI LUMPendant luminaire
- Square luminaire head made of anodised aluminium
- Ceiling gear box made of die-cast aluminium, powder-coated in matt grey metallic
- For reflector lamps
- Gear box secured with interlock
- Steel wire suspension (2 m) or pendant tube (0.4 m)
- Lamp change without using of tools
- Incl. universal adapter for 3-phases track
06_verkauf_produkte_eng.indd 222 29.05.2010 10:57:09 Uhr
223
Retail Lighting
MIDI LUMPendant luminaire for HIR111 lamps
223 118
158134
max
200
015
5
max
223
8
83
Pendant luminaire with square luminaire head for HIR111 lamps. Housing made of
anodised aluminium, gear box made of die-cast aluminium, powder-coated in grey
metallic, matt. Adjustable luminaire head. Beam angle according to lamp. C/w steel
wire suspension (2 m). Max. weight: 1.8 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 35 W c/w HF ballast 3005955 158 x 134 x 155 mm GX8,5
HIR111 70 W c/w HF ballast 3007865 158 x 134 x 155 mm GX8,5
Pen
dan
t lu
min
aire
s
MIDI LUM/RPendant luminaire for QR111 lamps
ø 115
158134
max
200
015
5
max
223
8
51
Pendant luminaire with square luminaire head for QR111 lamps. Housing made of
anodised aluminium. Adjustable luminaire head. Beam angle according to lamp. C/w
steel wire suspension (2 m) and round ceiling rose, powder-coated in grey metallic, matt.
Max. weight: 0.9 kg
Version grey metallic, matt Length x width x height Socket type
QR111 up to 100 W c/w transformer 300596 158 x 134 x 155 mm G53
06_verkauf_produkte_eng.indd 223 29.05.2010 10:57:15 Uhr
224 www.spittler.com
MIDI LUM/T400Pendant luminaire for HIR111 lamps
223 118
158134
390
155
618
73
Pendant luminaire with square luminaire head for HIR111 lamps. Housing made of
anodised aluminium, gear box made of die-cast aluminium, powder-coated in grey
metallic, matt. Adjustable luminaire head. Beam angle according to lamp. C/w
pendant tube (0.4 m). Max. weight: 1.9 kg
Version grey metallic, matt Length x width x height Socket type
HIR111 70 W c/w HF ballast 3007875 158 x 134 x 155 mm GX8,5
HIR111 35 W c/w HF ballast 3005985 158 x 134 x 155 mm GX8,5
MIDI LUM/TR 400Pendant luminaire for QR111 lamps
158134
390
155
596
51
ø 115
Pendant luminaire with square luminaire head for QR111 lamps. Housing made of
anodised aluminium. Adjustable luminaire head. Beam angle according to lamp. C/w
pendant tube (0.4 m) and round ceiling rose, powder-coated in grey metallic, matt.
Max. weight: 1.0 kg
Version grey metallic, matt Length x width x height Socket type
QR111 up to 100 W c/w transformer 300599 158 x 134 x 155 mm G53
06_verkauf_produkte_eng.indd 224 29.05.2010 10:57:29 Uhr
225
Retail Lighting
Hans Weibel Bäckerei-Konditorei in Sursee, Switzerland
Mayersche Buchhandlung in Nehein/Arnsberg, Germany
06_verkauf_produkte_eng.indd 225 29.05.2010 10:57:31 Uhr
226 www.spittler.com
Burger King in Könnern, Germany
06_verkauf_produkte_eng.indd 226 29.05.2010 10:57:42 Uhr
227
Retail Lighting
Roßbach Automobile in Hamburg, Germany
06_verkauf_produkte_eng.indd 227 29.05.2010 10:57:43 Uhr
228 www.spittler.com
Pendant luminaires
- Housing made of galvanised sheet steel, powder-coated in RAL 9006 with structure
- Aluminium reflector or clear acrylic reflector with optical prisms
- C/w assembled transparent mains supply wired ready for connection
- Steel wire suspension set (2 m) with eyelet
- Lamp change without using of tools
06_verkauf_produkte_eng.indd 228 29.05.2010 10:57:46 Uhr
229
Retail Lighting
PL 910Pendant luminaire with aluminium reflector
Pendant luminaire with aluminium reflector. Housing made of galvani-
sed sheet steel, powder-coated in RAL 9006 with structure. Facetted
aluminium reflector made of high-polished pure aluminium (outside
matt anodised). C/w steel wire suspension (20 m) and transparent
mains supply. Max. weight: 3.3 kg
Ø 180
450
Ø 330
1 lamp
Version RAL 9006 struktur Diameter Height Socket type
TC-TEL 26 W c/w HF ballast 910.01.26.63 13° 330 mm 450 mm GX24q
TC-TEL 32 W c/w HF ballast 910.01.32.63 14° 330 mm 450 mm GX24q
TC-TEL 42 W c/w HF ballast 910.01.42.63 14° 330 mm 450 mm GX24q
TC-TEL 57 W c/w HF ballast 910.01.57.63 14° 330 mm 450 mm GX24q
TC-TELI 60 W c/w HF ballast 910.01.60.63 21° 330 mm 450 mm 2G8
TC-TELI 85 W c/w HF ballast 910.01.85.63 22° 330 mm 450 mm 2G8
HIE 70 W c/w HF ballast 910.01.70.223 13° 330 mm 450 mm E27
HIE 100 W c/W HF ballast 910.01.10.223 12° 330 mm 450 mm E27
Attachments (Please order separately!)
Wire suspension, 3 m with loop 72430.3000
Wire suspension, 5 m with loop 72430.5000
Ceiling rose, round, RAL 9006 structure 900.001-18
Pen
dan
t lu
min
aire
s
06_verkauf_produkte_eng.indd 229 29.05.2010 10:57:49 Uhr
230 www.spittler.com
PL 912Pendant luminaire with prismatic reflector
Pendant luminaire with prismatic acrylic reflector. Housing made of
galvanised sheet steel, powder-coated in RAL 9006 with structure.
C/w steel wire suspension (2 m) and transparent mains supply.
Max. weight: 3.5 kg
Ø 180
450
Ø 316
1 lamp
Version RAL 9006 struktur Diameter Height Socket type
TC-TEL 26 W c/w HF ballast 912.01.26.63 45° 316 mm 450 mm GX24q
TC-TEL 32 W c/w HF ballast 912.01.32.63 50° 316 mm 450 mm GX24q
TC-TEL 42 W c/w HF ballast 912.01.42.63 55° 316 mm 450 mm GX24q
TC-TEL 57 W c/w HF ballast 912.01.57.63 65° 316 mm 450 mm GX24q
TC-TELI 60 W c/w HF ballast 912.01.60.63 41° 316 mm 450 mm 2G8
TC-TELI 85 W c/w HF ballast 912.01.85.63 48° 316 mm 450 mm 2G8
HIE 70 W c/w HF ballast 912.01.70.223 42° 316 mm 450 mm E27
HIE 100 W c/W HF ballast 912.01.10.223 40° 316 mm 450 mm E27
2 lamps
Version RAL 9006 struktur Diameter Height Socket type
2 x TC-TEL 26 W c/w HF ballast 912.02.26.63 49° 316 mm 450 mm GX24q
2 x TC-TEL 32 W c/w HF ballast 912.02.32.63 52° 316 mm 450 mm GX24q
2 x TC-TEL 42 W c/w HF ballast 912.02.42.63 60° 316 mm 450 mm GX24q
2 x TC-TEL 57 W c/w HF ballast 912.02.57.63 75° 316 mm 450 mm GX24q
Attachments (Please order separately!)
Wire suspension, 3 m with loop 72430.3000
Wire suspension, 5 m with loop 72430.5000
Ceiling rose, round, RAL 9006 structure 900.001-18
Optics (You will find a detailed description on page 239!)
912.9000 912.9010 912.9011 912.9030
06_verkauf_produkte_eng.indd 230 11.06.2010 8:49:38 Uhr
231
Retail Lighting
PL 916Pendant luminaire with prismatic reflector
Pendant luminaire with prismatic acrylic reflector. Housing made of
galvanised sheet steel, powder-coated in RAL 9006 with structure.
C/w steel wire suspension (2 m) and transparent mains supply.
Max. weight: 6.9 kg
Ø 180
535
Ø 416
1 lamp
Version RAL 9006 struktur Diameter Height Socket type
TC-TEL 32 W c/w HF ballast 916.01.32.63 46° 416 mm 535 mm GX24q
TC-TEL 42 W c/w HF ballast 916.01.42.63 51° 416 mm 535 mm GX24q
TC-TEL 57 W c/w HF ballast 916.01.57.63 59° 416 mm 535 mm GX24q
TC-TELI 60 W c/w HF ballast 916.01.60.63 42° 416 mm 535 mm 2G8
TC-TELI 85 W c/w HF ballast 916.01.85.63 50° 416 mm 535 mm 2G8
TC-TELI 120 W c/w HF ballast 916.01.12.63 62° 416 mm 535 mm 2G8
HIE 150 W c/w HF ballast 916.01.15.223 40° 416 mm 535 mm E27
2 lamps
Version RAL 9006 struktur Diameter Height Socket type
2 x TC-TEL 26 W c/w HF ballast 916.02.26.63 45° 416 mm 535 mm GX24q
2 x TC-TEL 32 W c/w HF ballast 916.02.32.63 48° 416 mm 535 mm GX24q
2 x TC-TEL 42 W c/w HF ballast 916.02.42.63 52° 416 mm 535 mm GX24q
2 x TC-TEL 57 W c/w HF ballast 916.02.57.63 60° 416 mm 535 mm GX24q
Attachments (Please order separately!)
Wire suspension, 3 m with loop 72430.3000
Wire suspension, 5 m with loop 72430.5000
Ceiling rose, round, RAL 9006 structure 900.001-18
Optics (You will find a detailed description on page 239!)
916.9000
Pen
dan
t lu
min
aire
s
06_verkauf_produkte_eng.indd 231 29.05.2010 10:57:52 Uhr
232 www.spittler.com
PL 922Pendant luminaire with prismatic reflector
Pendant luminaire with prismatic acrylic reflector. Housing made of
galvanised sheet steel, powder-coated in RAL 9006 with structure.
C/w steel wire suspension (2 m) and transparent mains supply.
Max. weight: 11.7 kg
Ø 245
650
Ø 516
1 lamp
Version RAL 9006 struktur Diameter Height Socket type
HIE 250 W c/w magn. ballast* 922.01.25.221 50° 516 mm 650 mm E40
HIE 400 W c/w magn. ballast*/** 922.01.40.221 55° 516 mm 650 mm E40
HME 250 W c/w magn. ballast 922.01.25.321 50° 516 mm 650 mm E40
* Should be only used with protected lamps (e.g. HQI-E/P)!** Don‘t operate with closed reflector or conical lens!
Attachments (Please order separately!)
Wire suspension, 3 m with loop 72430.3000
Wire suspension, 5 m with loop 72430.5000
Ceiling rose, round, RAL 9006 structure 900.001-18
Optics (You will find a detailed description on page 239!)
922.9000
06_verkauf_produkte_eng.indd 232 29.05.2010 10:57:57 Uhr
233
Retail Lighting
Winery in Port Philip Estrate, Australia
06_verkauf_produkte_eng.indd 233 29.05.2010 10:57:58 Uhr
234 www.spittler.com
Opticsfor recessed, track, shelf and gimbal luminaires
Frosted safety glass pane
- Homogenous, smooth light
- Increases diffuse light portion
- Reduces shades
- Softens contrasts
Version Art.-No.
EB 10 10.900
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.900
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.900
Instance image
Clear safety glass pane
- Unchanged lighting distribution
- Serially used for fitting with HIT-TC-CE / HIT-TC lamps
Version Art.-No.
EB 10 / SH 10 10.901
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.901
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.901
Instance image
UV-Filter
- Reduces UV radiation
- Prolongates the bleaching of illuminated items
Version Art.-No.
EB 10 / SH 10 10.901UV
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.901UV
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.901UV
Instance image
Linear prismatic glass pane
- Light dilation across to the prism for oval illumination
- Glass is rotatable
Version Art.-No.
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.937
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.937
Instance image
06_verkauf_produkte_eng.indd 234 29.05.2010 10:58:01 Uhr
235
Retail Lighting
Op
tics
Colour effect filterfor recessed, track, shelf and gimbal luminaires
Colour effekt filter, red
- Dichroic interference filter
- Lighting accents at the red spectral area
Version Art.-No.
EB 10 / SH 10 10.991
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.991
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.991
Instance image
Colour effect filter, orange
- Dichroic interference filter
- Lighting accents at the orange spectral
area
Version Art.-No.
EB 10 / SH 10 10.992
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.992
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.992
Instance image
Colour effect filter, yellow
- Dichroic interference filter
- Lighting accents at the yellow spectral area
Version Art.-No.
EB 10 / SH 10 10.993
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.993
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.993
Instance image
Colour effect filter, green
- Dichroic interference filter
- Lighting accents at the green spectral area
Version Art.-No.
EB 10 / SH 10 10.994
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.994
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.994
Instance image
Colour effect filter, blue
- Dichroic interference filter
- Lighting accents at the blue spectral area
Version Art.-No.
EB 10 / SH 10 10.995
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.995
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.995
Instance image
06_verkauf_produkte_eng.indd 235 29.05.2010 10:58:06 Uhr
236 www.spittler.com
Food glass filtersfor recessed, track, shelf and gimbal luminaires
Food glass filter for meat products
- Dichroic interference filter „Pink“
- Reduces the medium and infrared spectral area to protect the products
- Emphasing the fresh natural colours of meat and sausages
- Recommended lamp: HIT/ CDM-T, warm white
Version Art.-No.
EB 10 / SH 10 10.961
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.961
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.961
Instance image
Food glass filter for bakery products
- Dichroic interference filter „M3-400“
- Increases the short wave spectral area from yellow to infrared
- Intensifying of all warm colour shades for bakery products
- Recommended lamp: SDW-T/ CDM-T, warm white
Version Art.-No.
EB 10 / SH 10 10.962
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.962
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.962
Instance image
0
10
20
30
40
50
60
70
80
90
100
350
370
390
410
430
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
750
770
790
nm
%
0
10
20
30
40
50
60
70
80
90
100
350
370
390
410
430
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
750
770
790
nm
%
06_verkauf_produkte_eng.indd 236 29.05.2010 10:58:08 Uhr
237
Retail Lighting
Food glass filtersfor recessed, track, shelf and gimbal luminaires
Food glass filters for fruits and cheese
- Dichroic interference filter „Yellow“
- Emphasises the fruit characteristics from yellow up to red colour rendering
- Optimum product display for fruits and cheese
- Recommended lamp: SDW-T/ CDM-T, warm white
Version Art.-No.
EB 10 / SH 10 10.963
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.963
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.963
Instance image
Food glass filter for vegetables
- Dichroic interference filter „Green“
- Amplifies the central green spectral area
- Reduces the infrared and UV part to protect the products
- Emphasing the freshness of vegetables and flowers
- Recommended lamp: CDM-T, neutral white
Version Art.-No.
EB 10 / SH 10 10.964
EB 12 / AS 12 / AS 13 / KA 12 / SH 12 12.964
EB 18 / AS 18 / AS 19 / AS 27 / KA 18 18.964
Instance image
Op
tics
0
10
20
30
40
50
60
70
80
90
100
350
370
390
410
430
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
750
770
790
nm
%
0
10
20
30
40
50
60
70
80
90
100
350
370
390
410
430
450
470
490
510
530
550
570
590
610
630
650
670
690
710
730
750
770
790
nm
%
06_verkauf_produkte_eng.indd 237 29.05.2010 10:58:11 Uhr
238 www.spittler.com
Opticsfor track lights
Anti-dazzle wings
- Limits the light cone
- Steel sheet, black powder-coated
- Adjustable wings
- As retro fitting possible
Version Art.-No.
AS 12 12.998
AS 13 13.998
AS 18 18.998
AS 19 19.998
Instance image
Honeycomb lens
- C/w lens holder
- Only in connection with lens holder available
- Thin sheet, black anodised
- Reduces the glare and improves the light distribution (as retro fitting possible)
Version Art.-No.
AS 12 12.996G
AS 13 13.996G
AS 18 18.996G
AS 19 19.996G
Instance image
Lens holder for AS 12 and AS 18
- Takes-up filters and lenses
- Aluminium, powder-coated
- As retro fitting possible
Version Art.-No.
AS 12, colour RAL9016 structure 12.9VL-10
AS 12, colour RAL9006 structure 12.9VL-18
AS 18, colour RAL9016 structure 18.9VL-10
AS 18, colour RAL9006 structure 18.9VL-18
Instance image
Lens holder for AS 13 and AS 19
- Takes-up filters and lenses
- Aluminium, matt black powder-coated
- As retro fitting possible
Version Art.-No.
AS 13 13.9VL
AS 19 19.9VL
Instance image
06_verkauf_produkte_eng.indd 238 29.05.2010 10:58:13 Uhr
239
Retail Lighting
Opticsfor high-bay luminaires
Conical lens
- Spreads the direct light portion to achieve a homogenous illumination
- With clamp for tool-less mounting
Version Art.-No. Dimensions (DxT) Weight
PL 912 912.9000 316 x 3 mm 0.30 kg
PL 916 916.9000 416 x 3 mm 0.50 kg
PL 922 922.9000 516 x 3 mm 0.90 kg
Op
tics
1 decorative metal ring
- Metal ring, powder-coated in RAL 9006 structure
- Fixed with 3 brackets at the housing
Version Art.-No. Dimensions (DxH) Weight
PL 912 912.9010 420 x 15 mm 0.65 kg
3 decorative metal rings
- 3 metal rings, powder-coated in RAL 9006 structure
- Fixed with 3 brackets at the housing
Version Art.-No. Dimensions (DxH) Weight
PL 912 912.9030 420 x 15 mm 1.50 kg
1 decorative metal ring with frosted safety glass pane
- Diffuse light portion to achieve a homogenous illumination
- Metal ring, powder-coated in RAL 9006 structure
- Safety glass pane inlayed into metal ring
- Fixed with 3 brackets at the housing
Version Art.-No. Dimensions (DxH) Weight
PL 912 912.9011 420 x 15 mm 1.30 kg
06_verkauf_produkte_eng.indd 239 29.05.2010 10:58:15 Uhr
240 www.spittler.com
Power units
Power unit for halogen metal halide lamps HIT / HIT-DE
Electronic ballast for metal halide lamps HIT / HIT-DE. Black polyamide housing.
Lamp cable (0,5 m) with ST18-connector. Mains connection via screws until
2,5mm². Auto power off if lamps are missing or faulty and during overheat.
- Supply voltage 220 - 240 Volt
- Mains frequency 50 / 60 Hz
- Mains current 0,2 / 0,36 / 0,7 A
- Power factor 0,97
Version Art.-No. Length x width x height Weight
for 35 W 10.35.23 156 x 88 x 39 mm 0.5 kg
for 70 W 10.70.23 156 x 88 x 39 mm 0.5 kg
for 150 W 10.15.23 156 x 88 x 39 mm 0.5 kg
Power unit for high-pressure sodium vapour lamps HST-CRI (SDW-T)
Magnetic power unit for sodium vapour lamps HST-CRI with mains supply. Black
anodised aluminium housing. Lamp cable (0,5 m) with ST18-connector.
- Supply voltage 220 - 240 Volt
- Mains frequency 50 Hz
- Mains current 0,46 / 0,78 / 1,35 A
- Power factor 0,88 / 0,89
Version Art.-No. Length x width x height Weight
for 35 W 10.35.30 350 x 74 x 100 mm 2.5 kg
for 50 W 10.50.30 350 x 74 x 100 mm 2.6 kg
for 100 W 10.10.30 350 x 74 x 100 mm 3.0 kg
Power unit for high-pressure sodium vapour lamps HST-CRI (SDW-TG)
Electronic ballast for high-pressure sodium vapour lamps HST-CRI (SDW-TG). Black
ployamide housing. Lamp cable (0,5 m) with ST18-connector. Mains connection
via screws up to 2,5 mm². Auto power off if lamps are missing or faulty and
during overheat.
- Supply voltage 220 - 240 Volt
- Mains frequency 50 / 60 Hz
- Mains current 0,49 / 0,54 A
- Power factor 0,95
Version Art.-No. Length x width x height Weight
for 50 W 10.50.33 180 x 90 x 40 mm 0.5 kg
for 100 W 10.10.33 180 x 90 x 40 mm 0.5 kg
06_verkauf_produkte_eng.indd 240 29.05.2010 10:58:24 Uhr
241
Retail Lighting
Epping Plaza in Melbourne, Australia
06_verkauf_produkte_eng.indd 241 29.05.2010 10:58:24 Uhr
242 www.spittler.com
TracksPlease ask us if you need tracks and accessories with data bus!
3-phases-track for surface mounting
Version white black silver
1000 mm 25.10.1 25.10.2 25.10.3
2000 mm 25.20.1 25.20.2 25.20.3
3000 mm 25.30.1 25.30.2 25.30.3
32
36
Feeding connector
Version white black silver
Earth connector left 99.024.1 99.024.2 99.024.3
Earth connector right 99.025.1 99.025.2 99.025.3
32
36
112
Electrical along-connector with feeding
Version white black silver
Art.-No. 99.078.1 99.078.2 99.078.3 172
Electrical along-connector
Version white black silver
Art.-No. 99.037.1 99.037.2 99.037.3
5825
Vertical corner coupler with feeding
Version white black silver
Earth connector inside 99.027.1 99.027.2 99.027.3
Earth connector outside 99.079.1 99.079.2 99.079.3
105
105
T-Connector with feeding
Version white black silver
left 99.030.1 99.030.2 99.030.3
right 99.029.1 99.029.2 99.029.3
172
105
06_verkauf_produkte_eng.indd 242 29.05.2010 10:58:29 Uhr
243
Retail Lighting
TracksPlease ask us if you need tracks and accessories with data bus!
X-Coupler with feeding
Version white black silver
Art.-No. 99.031.1 99.031.2 99.031.3
172 172
Clamp for ceiling- or pendant mounting
Version white black silver
Art.-No. 99.075.1 99.075.2 99.075.3
36
5019
Steel wire suspension with thread M13 x 1 for use with clamps
Version Art.-No.
1500 mm 72400.1500
End cap
Version white black silver
Art.-No. 99.035.1 99.035.2 99.035.3
2
Flexible coupler
Version white black
Art.-No. 99.033.1 99.033.290ϒ
68
68
Ceiling rose for adapter luminaire with bus option
Version white black silver
Art.-No. 99.275.1 99.275.2 99.275.3
62
ø 125
Att
ach
men
ts
06_verkauf_produkte_eng.indd 243 29.05.2010 10:58:34 Uhr