Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat...

8

Transcript of Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat...

Page 1: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 2: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 3: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 4: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 5: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 6: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 7: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the
Page 8: Spind Malaysia | Think of Floor Trap, Think of Spind · Firstly cut the pipe (E) square and flat with a proper pipe cutter. Then slide on the nut (A) with back end going onto the