Spill Response Guide - NZ Safety · This is a guide only. A spill response procedure should be...
Transcript of Spill Response Guide - NZ Safety · This is a guide only. A spill response procedure should be...
This is a guide only. A spill response procedure should be developed to meet specific site requirements. NZ Safety can provide products, advice, training and assistance to create a procedure specific to your requirements.
1 – BE PREPARED
• Evaluate the types of materials and ensure they are clearly labelled• Minimise the volumes and ensure they are stored and handled correctly and the area is tidy• Ensure availability of Material Safety Data Sheets (MSDS) • Do you have the necessary spill response equipment and Personal Protective Equipment (PPE)
in the right places?
• Does everyone know what to do and have they practiced recently?
3 – STOP THE SOURCE
• Locate the source and stop it• Close valves or taps, rotate punctured drums and plug leaks
4 – PROTECT THE STORMWATER
• Block stormwater drains using drain covers, shut-off valves, pipe bungs, etc• Confine or divert the spill with spill berms, socks, sand bags or other suitable material
5 – NOTIFY
• Tell your supervisor, site foreman or manager • If necessary alert your Regional Council
6 – CLEAN UP
• Where necessary neutralize hazardous substances• Use absorbents to clean up spilt liquids and place in a suitable
container or bag• For large volume spills that are contained use a sucker truck • Clean up all residues without contaminating the stormwater
7 – DISPOSE
• Use a responsible waste disposal contractor • Remove contaminated material, absorbents, soil and PPE
8 – RESTOCK & REVIEW
• Immediately replace all used absorbents and PPE – Contact NZ Safety on 0800 697 233
• Assess the cause and take necessary steps to prevent reoccurrence• Complete any necessary forms and communicate the lessons learned
2 – BE SAFE
• If it’s an emergency evacuate the area and call emergency services• Identify the spill, what is it?• If necessary wear appropriate PPE
Spill KitGENERAL PURPOSE
240LKit Contains
•
2 x Bags Particulate•
5 x Pads•
2 x 1.2m Socks
•
2 x Pillows•
2 x Disposal Bags •
PPE•
Instructions
For all liquids including oils,solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
40LKit Contains
• 2 x B ags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
40LKit Contains
• 2 x B ags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
40LKit Contains
• 2 x B ags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
240LKit Contains
• 2 x Bags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
40LKit Contains
• 2 x B ags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill KitGENERAL PURPOSE
40LKit Contains
• 2 x B ags Particulate• 5 x Pads• 2 x 1.2m Socks • 2 x Pillows• 2 x Disposal Bags • PPE• Instructions
For all liquids including oils, solvents, coolants and mild chemicals.
Refill Code: 879371L
Product Code 879282L
Spill Response Guide
0800 697 233 | nzsafety.co.nz