Speed Limiting Electronical Theft Protection Creep Speed Electronic

8/14/2019 Speed Limiting Electronical Theft Protection Creep Speed Electronic

1/6

The Better Machine.

Technical Description L 580Wheel Loader

Tipping load 17850 kgBucket capacity 5,0 m3

Operating weight 24,7 tEngine output 195 kW/265 HP

Standard:xAirconditionxRidecontrol

x Inchbrakesystem

xElectroniccrowdingforce

controlxCreepspeed


2/62

Technical Data

EngineLiebherr diesel engine __________ D 926 TI-E A2

6-cylinder, inline engine, watercooledexhaust-turbo charged with inter-cooler

Power outputaccording to ISO 9249______ 195 kW (265 bhp) at 2000 RPMMax. torque ____________________ 1170 Nm at 1200 RPMDisplacement__________________ 9,96 litresBore/stroke ____________________ 122/142 mm

Air cleaner __________________________ Dry type with main and safetyelement, pre-cleaner, service indi-cator on LCD display

Operating voltage ________________ 24 VBattery __________________________ 2 x 143 Ah/12 V

Alternator ______________________ Three-phase AC, 28 V/55 AStarter motor__________________ 24 V/5,4 kW

SteeringDesign ________________________________ Load-sensing variable axial piston

pumpCentral pivot with two doubleacting,

damped steering cylindersAngle of articulation ____________ 40h (to each side)Emergency steering______________ Electro-hydraulic emergency steering

system

Attachment hydraulicsDesign ________________________________ Load-sensing variable axial piston

pump with output control and pres-sure cutoff

Max. flow ____________________________ 290 l/min.Max. operating pressure________ 350 barCooling________________________________ Hydraulic oil cooling using thermo-

statically controlled fan and oilcooler

Filtering______________________________ Return-line filter in the hydraulicreservoir

Control ________________________________ Liebherr-Joystick with hydraulicservo control

Lift circuit ____________________________ Lifting, neutral, loweringand float positions controlled byLiebherr joystick with detent; auto-matic lifting-limit circuit

Tilt circuit ____________________________ Tilt back, neutral, dumpautomatic bucket positioning

AttachmentsGeometry ____________________________ Powerful Z-pattern linkage with tilt

cylinder and cast steel crosstubeBearings ______________________________ sealedCycle time at nominal load ____ Lifting__________________________________ 5,6 sec

Dumping________________________________ 2,0 secLowering (empty) __________________ 3,5 sec

Operators cab

Design ________________________________ ROPS/FOPS cab resiliently mountedon rear section of vehicle and noise-damped; lockable door with sliding

window and 180h opening angle;emergency exit; toughened safetyglass windows, tinted; adjustablesteering column as standard equip-ment;ROPS roll-over protection according

to DIN/ISO 3471/EN 474-3 andFOPS falling objects protectionaccording to DIN/ISO 3449/EN 474-1

Operators seat ____________________Air-suspensioned seat with lap beltCab heating and ventilation __With defrosting, fresh-air filter, air-

recirculated-air mode and heatersupplied from engines coolingsystem. Air conditioning is standardequipment

CapacitiesFuel tank ______________________________________________________________________________ 330 lEngine oil (including filter change) __________________________________________ 18 lPump distributor gears____________________________________________________________ 2,5 lTransmission __________________________________________________________________________ 21 lFront axle/wheel hubs ________________________________________________________ 36/20 lRear axle/wheel hubs __________________________________________________________ 24/11 lHydraulic tank ______________________________________________________________________ 160 lHydraulic system, total __________________________________________________________ 240 l

Travel gearHydrostatic travel

transmission ________________________All-wheel driveDesign __________________________Variable-displacement swashplate

pump and axial piston motor in aclosed-loop circuit with a 3-stageplanetary transmission. Direction of

travel is reversed by changing the

flow-direction of the variable dis-placement pump

Filtering system______________ Suction-side filter for the closedcircuit

Control __________________________ By travel and inching pedal Theinching pedal makes it possible tocontrol the tractive and thrust forcessteplessly at full engine speed. TheLiebherr joystick is used to controlforward and reverse travel and select

the travel stagesTravel speeds ______________________ Stage 1 __________________________ 8,0 km/h

Stage 2 __________________________ 18,0 km/hStage 2A (automatic) ______ 18,0 km/hStage 3A (automatic) ______ 38,0 km/hForwards and in reverse with tyresize 26.5R25

AxlesAll-wheel driveFront axle __________________________ FixedRear axle ____________________________ Centre pivot, with 13h oscillating

angle to each side. Obstacles up to560 mm in height can be driven over(with all four wheels remaining incontact with the ground)

Differentials ________________________Automatic limited-slip differentialswith 45% locking action in both axles

Final drive __________________________ Planetary final drive in the wheelhubs

Track width ________________________ 2230 mm with all types of tyres

BrakesWear-free service brake ________ Self-locking of the hydrostatic travel

drive (acting on all four wheels) andadditional pumpaccumulator brakesystem with wet multi-disc brakeslocated in the wheel hubs. Two sepa-rate brake circuits

Parking brake ______________________ Electro-hydraulically actuated spring-loaded brake system on the trans-mission

Braking system complies with German road-vehicle constructionand use regulations.

TyresAvailable sizes ____________________ 26.5R25

Tubeless radial or cross-ply tyres onwell-base rims

Special tyres ________________________ By arrangement with the manu-facturer

Noise emission(86/662/EWG) ______________________ In the operators cab

Without blower 69 dB(A)Max. blower output 73 dB(A)Outside cab 106 dB(A)


3/63

Dimensions

J

L

K

F

49

D

E

G

45

65

I H

CB

A

* The figures shown here are valid with 26.5R25 Michelin XHA tyres and includes all lubricants, a full fuel tank, the ROPS/FOPS cab andthe operator. Different tyres and optional equipment will change the operating weight and overturning loads.

** The figures shown here are valid with Michelin XLD-D2 26.5R25 tyres.RHB = Rehandling bucketROB = Rock bucket with delta-cutting edge and spill guardT = Welded-on tooth holder with add-on teethE = Four-piece, bolt-on reversible cutting edge

Bucket type RHB* ROB**

Cutting tools T E T E T

Bucket capacity m3 5,0 5,0 5,5 5,5 4,0

Bucket width mm 3300 3300 3300 3300 3200

Specific material weight t/m3 1,8 1,8 1,6 1,6 2,1

Dumping height at max. lift heightA and 45h discharge mm 3300 3300 3230 3230 3250

B Dump-over height mm 4100 4100 4100 4100 4100

C Max. height of bucket bottom mm 4250 4250 4250 4250 4250

D Max. height of bucket pivot point mm 4560

E Max. operating height mm 6320 6320 6420 6420 6160

Reach at max. lift heightF and 45h discharge mm 1150 1150 1225 1225 1180

G Digging depth mm 110 110 110 110 110

H Height above cab mm 3540 3590

I Height above exhaust mm 3450 3500

J Ground clearance mm 550 600

K Wheelbase mm 3570 3570

L Oveall length mm 9000 8820 9100 8930 9130

Turning circle radius over outside bucket edge mm 7250 7230 7300 7280 7250Lifting force (SAE) kN 250 250 250 250 250

Breakout force (SAE) kN 175 175 160 160 170

Tipping load, straight * kg 20260 19995 20040 19735 20030

Tipping load, articulated at 37h* kg 18180 17940 18000 17730 17995

Tipping load, articulated at 40h* kg 17850 17640 17680 17410 17660

Operating weight* kg 24740 24940 24850 25090 25930


4/6


5/65

Basic MachineStandard Optional

Liebherr travel gear x

Ride control x

Liebherr shock absorbing element X

Automatic travel mode x

20 km/h speed limiting x

Electronical theft protection x

Creep speed x

Electronic crowding force control x

Combined inching-braking system x

Multi-disc limited slip differentials in both axles x

Air cleaner system with pre-filter x

Particle protection for radiatorx

Emergency steering system x

Headlights x

Tail lights x

Working area lights at front x

Working area lights at rear x

Battery master switch x

Pre-heat system for cold starting x

Towing hitch x

Lockable doors, service flap an engine hood x

Toolbox with toolkit x

Dust filter system x

Protective ventilation system x

Amber beacon x

Warning device for travel in reverse x

Exhaust pipe special steel x

Noise suppression package 101 x

Operators cabNoise-damped ROPS/FOPS cab x

with tinted safety glass

Hot-water heater with defroster x

and recirculated-air system

Adjustable steering column x

Liebherr-joystick control x

Air conditioning system x

Liebherr operators seat adjustable in 6 ways x

Air sprung operators seat with seat belt x

Sliding window x

Emergency exit x

Floor mat x

Wash/wipe system for windscreen and rear windowx

Interior rear-view mirror x

Sun visor x

Bottle holder x

Clothes hook x

Storage box x

Storage compartment x

Plug x

Ashtray x

Horn x

Provision for radio including Loudspeaker x

Radio set x

Operators package x

Standard Optional

Flashing turn indicators x

High-beam headlights x

Diagnosis system x

Warning lights for:Engine oil pressure x

Engine overheat x

Parking brake x

Hydraulic oil temperature x

Air cleaner blockagex

Battery charge x

Flow through emergency steering system x

Road travel X

Audible warnings for:Engine oil pressure x

Engine overheat x

Overheat of hydraulic fluid x

Emergency steering system X

Function keys for:Air conditioning x

Hazard warning flashers x

Parking brake x

Electronic tractive force adaptation x

Creep speed x

Ride control x

Automatic bucket positioner x

Hoist Kick-out x

Additional hydraulics x

Float position x

Headlights x

Working lights front x

Working lights rear x

Road travel x

Wash/wipe system for rear window x

Amber beacon x

Mode switch x

Rotary switches for:Blower x

Heater x

Fresh air or recirculated air x

Adjusting the crowding force counter x

EquipmentZ-bar linkage x

Parallel linkage X

Hydraulic servo control of working hydraulics x

Automatic bucket positioner adjustable x

Automatic hoist kick out adjustable x

Float position x

Loading buckets with and without teeth, x

or bolt-on cutting edge

High-dump bucket x

Light material bucket x

Fork carrier and lift forks x

Hydraulic quick-change device x

3rd hydraulic control circuit x

3rd and 4th hydraulic control circuits x

Comfort control x

20 km/h speed limiting x

Automatic acting central lubrication system

Country-specific versions x

X = Not available

Instruments and displays for:Diesel engine pre-heat x

Engine oil temperature x

Fuel reserve x

Timer for hours of operation x

Speedometer x

Travel speed ranges and gear selected x

Forward travel x

Reverse travel x

Speedometer x

Rev. counter x

Clock x

Safety belt X


6/6

LIEBHERR-WERK BISCHOFSHOFEN GMBH, Postfach 49, A-5500 Bischofshofen, (06462) 888-0, Fax (06462) 888-385www.liebherr.com, E-Mail: [email protected]

With compliments:

Liebherr wheel loaders principal data.

StereoloaderL 506

StereoloaderL 507

StereoloaderL 508

StereoloaderL 509

StereoloaderL 512

StereoloaderL 514

2

5

4

3

115

20

25

30

35n=?

20m

T~35sec

.

How economical is yourwheel loader?

Measuring your wheeled loaders fuelconsumption is as easy as this!

Liebherr test method.Determine the number of working cycles that can be carried

out with 5 litres of diesel fuel. The material is picked upfrom Heap A and carried in a Y movement to Point B, whichis 20 m away. The height of the bucket when the materialis dumped at Point B should be 2.5 m. These work cycles each of wich lasts for about 35 seconds are continueduntil the 5 litres of fuel in the external tank have beenused up.

How do you calculate the expected fuel consumption perworking hour?

400

No. of working cycles

The Liebherr measuringcanister set.Any Liebherr dealer will supply you with the measuringdevice free of charge or conduct the standard test for youif requested.

2,5m

Tipping load:Bucket capacity:Operating weight:Engine output:

32150.8481044/60

34650.9493046/63

38951.0531049/67

44401.1551052/71

Tipping load:Bucket capacity:Operating weight:

Engine output:

46151.37000

59/80

53051.57700

72/98



kgm3

kgkW/hp

kgm3

kg

kW/hp

kgm3

kgkW/hp

kgm3

kgkW/hp

Environmental protection can help you earn money!

L 544

L 554 L 564 L 580

106003.015300121/165

122703.517300137/186

152854.022450183/249

178505.024740195/265

L 574166904.524220195/265

L 53486252.412100100/136

L 53890002.512380100/136

Numbers of Litres/ Litres/ working cycles 100 tons hour

L 524: 2.0 m3 n = 48 2.9 8.3L 534: 2.4 m3 n = 40 2.8 10.0L 538: 2.5 m3 n = 40 2.8 10.0L 544: 3.0 m3 n = 35 2.6 11.4L 554: 3.5 m3 n = 33 2.4 12.1L 564: 4.0 m3 n = 24 2.9 16.7L 574: 4.5 m3 n = 23 2.7 17.4L 580: 5.0 m3 n = 22 2.7 18.2

Values for the Liebherr wheel loaders

L 52470052.01010081/110

15/11/00

05/12/00

A

B

fuel consumption=per working hour

LBH/PM8

450782-0.7

5-12.0

0

PrintedinGermany

byGerstmayer.

Illustrationsanddatamaydifferfroms

tandardequipment.Subjecttochangewithoutnotice.

Speed Limiting Electronical Theft Protection Creep Speed Electronic

Documents

Transcript of Speed Limiting Electronical Theft Protection Creep Speed Electronic