Specifications 4LSS6337A12T
Transcript of Specifications 4LSS6337A12T
8/7/2019 Specifications 4LSS6337A12T
http://slidepdf.com/reader/full/specifications-4lss6337a12t 1/2
Z
Y
ADA COMPLIANT
3112"
63"
1838"
3812"
1"
RIGHT SEAT
RIGHT PLUMBING
DETAIL F
-Multi piece shower module shall be constructed of gelcoat/fiberglass with full integral plywood backing
-Rough-In: Stud opening +1/4" -0" Nominal Dimensions.
C.S.I. FORMAT SPECIFICATION TEXT AVAILABLE
-Colors: Whi te as standard, others to match any
major fixture manufacturer, also available with
sprayable solid surface in many colors
A
A
-Custom curb heights, other than shown, are
available (between min. and max.)
-Grab bar
-Seat, folding-Mixing valve, pressure balanced, lever handle,
preplumbed tree to supply elbow
-Vacuum breaker
-Soap dish
INSTALLED BY OTHERS:
-Curtain and rod
-Collapsible Rubber Water Retainer
-Semi-permanent Threshold Adaptor
-Caulkless drain
Designed and manufactured in compliance with
the following standards and codes:
-I.P.C. International Plumbing Code
-Recess as needed to meet code
-Adhere to floor as required
36"
60"
74"
24"
-Accessories: Factory installed, unless prone to
damage during installation/shipping. Polished
chrome/satin stainless standard, others available. -A.N.S.I. Z124.2 Standards for Plastic Showers
-A.N.S.I. A117.1 Accessible and Usable Buildings
and Facilities
-U.P.C. Uniform Plumbing Code
-A.D.A. Accessibility Guildelines for Buildings and
Facilities
TOP VIEW - SCALE38" = 1'-0"
PERSPECTIVE VIEW - N.T.S.
MODEL SHOWN HERE AS:
FRONT ELEVATION - SCALE:38" = 1'-0"ASSEMBLY VIEW - N.T.S.
MODEL:
Y Z*
* - SEE BACK FOR DETAIL SECTIONS
UNITHEIGHT
THRESHOLDHEIGHT
MODEL #
SEE
OVER
Features:
We reserve the right to make revisions without notice
in the d esign of f ixtures or in packaging unless this
right has specifically been waived at the time the order
is accepted.
PRODUCT SPECIFICATIONS:
PRODUCT INFORMATION: ACCESSORIES: CODES:
NOTICE OF LIMITATION:
page 1 of 2DIV. OF FIBERGLASS SYSTEMS INC.www.best-bath.com 1-800-727-9907
2" MAX.1-1/4" MIN.
77"76-1/4"
4LSS6337A2T4LSS6337A12T
4LSS6337A12T*ALL ACCESSORIES OPTIONAL
-ADA compliant roll-in shower
-Available in various threshold heights
-Molded, four piece gelcoat/fiberglass
shower module
-"Smooth" wall finish, white (standard)
-Integral full wood backing for strength and
unlimited accessory placement
-On all threshold, heights 1-1/2" or taller,
no mud set is required-On all threshold, heights 1-1/4" or
shorter,no mud set is required, but an
epoxy adhesive k it is supplied
*OTHER THRESHOLD HEIGHT
AVAILABLE UPON REQUEST
8/7/2019 Specifications 4LSS6337A12T
http://slidepdf.com/reader/full/specifications-4lss6337a12t 2/2
212"
2"
14" MAX
SEMI-PERMANENT THRESHOLD ADAPTOR (OPTIONAL)
BUILD UP OR RECESS
TO MEET CODE
13
8"
T-SHAPED RUBBER WATER STOPPER (OPTIONAL)
14" MAX
SEMI-PERMANENT THRESHOLD ADAPTOR (OPTIONAL)
INTEGRAL LEVEL SUPPORT (ADHERED BY OTHERS)BUILD UP OR RECESS
TO MEET CODE
4" 8" DIA. DRAIN CUT-OUT212"
114"
13
8"
T-SHAPED RUBBER WATER STOPPER (OPTIONAL)
1/2" MIN.
PLYWOODGELCOAT
FINISH
(COLOR)
FIBERGLASSSKIN
LAMINATE
FIBERGLASS
LAMINATE REVEAL FLANGE
WHERE USED
STRAIGHT
FLANGE
WHERE USED
114"
INDEXING
PIN
SECTION A-A - SCALE: 3" = 1'-0"
SECTION A-A - SCALE: 3" = 1'-0"
**OTHER THRESHOLD HEIGHTS AVAILABLE UPON REQUEST**
DETAIL B - SCALE: 3" = 1'-0" DETAIL C - SCALE: NTS
WALL SECTION DETAIL TYPICAL FRAMING
PAN JOINT DETAIL
DETAIL F - SCALE: NTS
4LSS6337A12T
4LSS6337A2T
page 2
DIV. OF FIBERGLASS SYSTEMS INwww.best-bath.com 1-800-727-990