Specifications - Ferret.com.au · 2012-02-09 · • 7 kVA hydraulic generator (240 V/50 Hz)ulic...
Transcript of Specifications - Ferret.com.au · 2012-02-09 · • 7 kVA hydraulic generator (240 V/50 Hz)ulic...
www.genieindustries.com
BC
F
G
STM-45SELF-PROPELLED TELESCOPIC BOOMS
MODEL STM-45 MEASUREMENTS Metric US
Working height maximum* 15.72 m 51 ftPlatform height maximum 13.72 m 45 ftHorizontal reach maximum 11.18 m 36 ft 8 inBelow ground reach 1.50 m 4 ft 11 in Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 2.49 m 8 ft 2 in Length - stowed 12.37 m 39 ft 7 in Length - transport (jib tucked under) 10.67 m 35 ft Width: standard tyres 2.30 m 7 ft 6 in Wheelbase 2.20 m 7 ft 3 in Ground clearance - centre 0.32 m 1 ft 0.5 in
PRODUCTIVITY
Lift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 360° continunousTurntable tailswing 0.86 m 2 ft 10 inDrive speed - stowed 7.7 km/h 4.8 mphDrive speed - raised or extended 1.1 km/h 0.68 mphGradeability - stowed** 40% 40%Turning radius - inside 2.00 m 6 ft 8 inTurning radius - outside 4.78 m 15 ft 8 inControls 12 V DC proportionalTyres - RT lug - Foam fi lled 12-16.5 in NHS
POWER
Power source Deutz D2011L03i 3 cylinder diesel 34.3 kW (46 hp)Auxilliary power unit 12 V DC Hydraulic tank capacity 170 L 45 galFuel tank capacity 76 L 20 gal
WEIGHT
Weight*** 7,151 kg 15,765 lbs
STANDARD COMPLIANCE ANSI A92.6, CSA B354.2, CE Compliance, AS 1418.10
* The metric equivalent of working height adds 2 m to platform height. U.S adds 6 ft to platform height.** Gradeability applies to driving on slopes. Gradability may vary depending on the weight of options installed on
machine. See operators manual for details regarding slope ratings.*** Weight will vary depending on options and/or country standards.
SpecificationsA
D
E
RANGE OF MOTION STM-45
-5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 35 ft 40 ft -1.52 m 0 m 1.52 m 3.05 m 4.57 m 6.10 m 7.62 m 9.14 m 10.67 m 12.2 m
50 ft15.24 m
45 ft13.72 m
40 ft12.19 m
35 ft10.67 m
30 ft9.14 m
25 ft7.62 m
20 ft6.10 m
15 ft4.57 m
10 ft3.05 m
5 ft1.52 m
0 ft0 m
-5 ft-1.52 m
www.genieindustries.com
Brisbane (Head Offi ce)
33 Kimberley StreetDarra QLD 4076
Sydney
74 Glendenning RoadGlendenning NSW 2761
Melbourne
374 Hammond RoadDandenong VIC 3175
Perth
83 Bannister RoadCanning Vale WA 6155
Genie Australia – Toll free number 1800 788 633 Distributed by:
18340 NE 76th StreetP.O. Box 97030Redmond, Washington 98073-9730
Genie United States
S-45 090327 Ver1
SELF-PROPELLED TELESCOPIC BOOMS
MEASUREMENTS
S™-45• S™-45 has 15.72 m (51 ft) working
height• S™-45 has 11.18 m (36 ft 8 in)
horizontal reach• Up to 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform• 1.52 m (5 ft) jib boom with 135°
working range• 4WD Positive traction drive• Full-time active oscillating axle• Fully proportional controls• 360° continuous turntable rotation• Foam-filled Rough Terrain tyres• Two speed wheel motors• Closed-loop hydrostatic drive• Engine protection package• Auto engine fault shutdown• Drive enable system• Wire braided hose• Hydraulic oil cooler• Intake air heater• Self-leveling platform• Hydraulic platform rotation• Swing-out engine tray• Engine gauge package• Locking turntable covers• Foot switch time out• Lockable platform control box covers• Thumb rocker steer• Tilt alarm• Dual flashing beacons• Electric horn• Motion alarm• Hour meter
POWER
• Deutz Diesel 36 kW (49 hp)• 12 V DC auxiliary power
PRODUCTIVITY
• Air line to platform• Platform work lights• Front driving lights• Platform swing gate• Half mesh platform inserts
with swing gate• Platform rail pinch guard• Hostile environment packages• Deluxe aircraft protection package• Fluorescent tube caddy• Tool tray• Mine spec option• 1.8 m (6 ft) steel platform
POWER OPTIONS
• Cold start packages• 7 kVA hydraulic generator (240 V/50 Hz)ulic generator (240 V/50 Hz)V/50 Hz)• 240 V power to platform
Effective date: April, 2009. Product specifications are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions onthe proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standardwritten warranty applicable to the particular product and sale and we make no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries, Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries, Inc in theU.S.A. and many other countries. Genie is a Terex Company. Copyright 2009 Terex Corporation
STM-45
Features OPTIONS & ACCESSORIES STANDARD FEATURES
www.genieindustries.com
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
CD
E
AB
FG
RANGE OF MOTION STM-65
-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft -3.05m 0 m 3.05 m 6.10 m 9.14 m 12.2 m 15.24 m 18.29 m
70 ft 21.34 m
60 ft 18.29 m
50 ft 15.24 m
40 ft 12.19 m
30 ft 9.14 m
20 ft 6.1 m
10 ft 3.05 m
0 ft 0 m
-10 ft -3.05 m
STM-65SELF-PROPELLED TELESCOPIC BOOMS
Specifications
MODEL STM-65
F
C
A
BE
D
G
MEASUREMENTS Metric USWorking height maximum* 21.80 m 71 ftPlatform height maximum 19.80 m 65 ftHorizontal reach maximum 17.10 m 56 ft 2 inBelow ground reach 2.72 m 8 ft 11 in Platform length 0.91 m 3 ft
Platform width 2.44 m 8 ft Height - stowed 2.72 m 8 ft 11 in Length - stowed 9.50 m 31 ft 2 in Length - transport (jib tucked under) 7.60 m 25 ft Width 2.49 m 8 ft 2 in Wheelbase 2.50 m 8 ft 2.5 in Ground clearance - center 0.37 m 1 ft 2.5 in
PRODUCTIVITYLift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 360° continuousTurntable tailswing 1.22 m 4 ftDrive speed - 4WD stowed 4.8 km/h 3.0 mphDrive speed - raised or extended 1.1 km/h 0.68 mphGradeability - 4WD - stowed** 45% 45%Turning radius - inside 2.36 m 7 ft 9 inTurning radius - outside 5.72 m 18 ft 9 inControls 12 V DC proportionalTyres - RT lug - Foam fi lled 355/55D 625
POWERPower source Deutz D2011L03i 3 cylinder diesel 46 hp (34.3 kW) Auxiliary power unit 12 V DC 12 V DCHydraulic tank capacity 170 L 45 galFuel tank capacity 132 L 35 gal
WEIGHT*** 10,349 kg 22,815 lbs
STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
www.genieindustries.com
Brisbane (Head Offi ce)
33 Kimberley StreetDarra QLD 4076
Sydney
74 Glendenning RoadGlendenning NSW 2761
Melbourne
374 Hammond RoadDandenong VIC 3175
Perth
83 Bannister RoadCanning Vale WA 6155
Genie Australia – Toll free number 1800 788 633 Distributed by:
18340 NE 76th StreetP.O. Box 97030Redmond, Washington 98073-9730
Genie United States
S-65 090327 Ver1
STM-65SELF-PROPELLED TELESCOPIC BOOMS
PRODUCTIVITY
• Platform swing gate• Half-mesh platform inserts
with swing gate• Platform top auxiliary rail• Air line to platform• Hydraulic oil cooler • Fire resistant hydraulic oil• Biodegradable hydraulic oil• Basic hostile environment kit• Deluxe hostile environment kit• Deluxe aircraft protection package
(6 ft platform)• Tool tray• Fluorescent tube caddy • Platform work lights• Front driving lights• Lockable platform control box covers• Second battery • Tow package • 1.83 m (6 ft) steel platform• Rough terrain non-marking tyres
(foam-filled)
POWER OPTIONS
• 240 V power to platform• 7 kVA hydraulic generator (240 V/50 Hz)• Cold Weather Packages• Arctic Packages• Diesel scrubber/spark arrestor muffler• Retained key selector switch
OPTIONS & ACCESSORIES
FeaturesMEASUREMENTS
• 21.80 m (71 ft) working height• 17.10 m (56 ft 2 in) horizontal reach• Up to 227 kg (500 lb) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform• 1.52 m (5 ft) jib boom with 135°
working range• 4WD• Full-time active oscillating axle• Rough terrain foam-filled tyres• Self-leveling platform• Hydraulic platform rotation • Fully proportional Hall effect
joystick controls• Drive enable• Tilt alarm• Motion alarm• Descent alarm• Hour meter• Horn• 360° continuous turntable rotation• Positive traction drive• Two speed wheel motors• Engine gauge package• Thumb rocker steer• Dual flashing beacons
POWER
• 12 V DC auxiliary power• Deutz diesel 34.3 kW (46 hp)• Anti-restart engine protection• Auto engine fault shutdown• Swing out engine tray• Deutz intake air heater
STANDARD FEATURES
Effective Date: April, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual forinstructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment isthe standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries,Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries, Inc.in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.
www.genieindustries.com
CD
E
A
B
FG
STM-65 TraxSELF-PROPELLED TELESCOPIC BOOMS
MODEL STM-65 Trax
Specifications
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.** Gradeability applies to driving on slopes, see operator’s manual for details regarding slope ratings.*** Weight will vary depending on options and/or country standards..
RANGE OF MOTION STM-65 Trax
-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft 60 ft -3.05m 0 m 3.05 m 6.10 m 9.14 m 12.2 m 15.24 m 18.29 m
70 ft21.34 m
60 ft18.29 m
50 ft15.24 m
40 ft12.19 m
30 ft9.14 m
20 ft6.1 m
10 ft3.05 m
0 ft0 m
-10 ft-3.05 m
MEASUREMENTS Metric US
Working height maximum* 21.86 m 71 ft 2 inPlatform height maximum 19.86 m 65 ft 2 inHorizontal reach maximum 17.10 m 56 ft 2 inBelow ground reach 2.67 m 8 ft 9 in Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 2.77 m 9 ft 1 in Length - stowed 9.50 m 31 ft 2 in Length - transport (jib tucked under) 7.60 m 25 ft Width 2.59 m 8 ft 6 in Wheelbase 2.50 m 8 ft 2.5 in Ground clearance - centre 0.43 m 1 ft 5 in
PRODUCTIVITY
Lift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 360° continuousTurntable tailswing 1.22 m 4 ftDrive speed - stowed 3.7 km/h 2.3 mphDrive speed - raised or extended 1.1 km/h 0.68 mphGradeability - stowed** 45% 45%Controls 12 V DC proportionalTrack system - 4 point Loegering QTS-R42
POWER
Power source Deutz D2011L03i 3 cylinder diesel 46 hp (34.3 kW)Auxiliary power unit 12 V DC 12 V DCHydraulic tank capacity 170 L 45 galFuel tank capacity 132 L 35 gal
WEIGHT***
12,248 kg 27,002 lbsGround Pressure 66.9 kpa 9.7 psi
STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, AS 1418.10
F
C
A
BE
D
G
www.genieindustries.com
Brisbane (Head Offi ce)
33 Kimberley StreetDarra QLD 4076
Sydney
74 Glendenning RoadGlendenning NSW 2761
Melbourne
374 Hammond RoadDandenong VIC 3175
Perth
83 Bannister RoadCanning Vale WA 6155
Genie Australia – Toll free number 1800 788 633 Distributed by:
18340 NE 76th StreetP.O. Box 97030Redmond, Washington 98073-9730
Genie United States
S-65 TRAX 090327 Ver1
STM-65 TraxSELF-PROPELLED TELESCOPIC BOOMS
Effective Date: April, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual forinstructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment isthe standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries,Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries, Inc.in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.
PRODUCTIVITY
• Platform swing gate• Half-mesh platform inserts with swing
gate• Platform top auxiliary rail• Air line to platform• Hydraulic oil cooler • Fire resistant hydraulic oil• Biodegradable hydraulic oil• Basic hostile environment kit • Deluxe hostile environment kit • Tool tray• Platform work lights• Front driving lights• Lockable platform control box covers• Second battery• 1.83 m (6 ft) steel platform
POWER OPTIONS
• 7 kVA hydraulic generator (240 V/50 Hz)• Cold Weather Packages• Diesel scrubber/spark arrestor muffler• Air precleaner• Retained key selector switch• 240 V power to platform
OPTIONS & ACCESSORIES
FeaturesMEASUREMENTS
• 21.86 m (71 ft 2 in) working height• 17.10 m (56 ft 2 in) horizontal reach• Up to 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform• 1.52 m (5 ft) jib boom with 135°
working range• 4WD• Full-time active oscillating axle• Track system QTS-R42• Self-leveling platform• Hydraulic platform rotation • Fully proportional Hall effect
joystick controls• Drive enable• Tilt alarm• Descent alarm• Motion alarm• Hour meter• Horn• 360° continuous turntable rotation• Positive traction drive• Two speed wheel motors• Thumb rocker steer• Engine gauge package• Dual flashing beacons
POWER
• 12 V DC auxiliary power• Deutz diesel 34.3 kW (46 hp)• Anti-restart engine protection• Auto engine fault shutdown• Swing out engine tray• Deutz intake air heater
STANDARD FEATURES
www.genieindustries.com
F
A
BE C
D
G
C
D
E
A
B
F
G
STM-125SELF-PROPELLED TELESCOPIC BOOMS
MODEL STM-125
Specifications
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
RANGE OF MOTION STM-125 MEASUREMENTS Metric USWorking height maximum* 40.15 m 131 ft 2 inPlatform height maximum 38.15 m 125 ft 2 inHorizontal reach maximum 24.38 m 80 ftBelow ground reach 3.27 m 10 ft 9 in Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 3.07 m 10 ft 1 in Length - stowed 14.25 m 46 ft 9 in Length - transport (jib tucked under) 12.17 m 39 ft 11 in Width - axles retracted 2.49 m 8 ft 2 in Width - axles extended 3.35 m 11 ft Wheelbase 3.66 m 12 ft Ground clearance - centre 0.44 m 1 ft 5.5 in
PRODUCTIVITY
Lift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 360° continuousTurntable tailswing - axle retracted 1.68 m 5 ft 6 inTurntable tailswing - axle extended 1.24 m 4 ft 1 inDrive speed - stowed 4.8 km/h 3.0 mphDrive speed - raised/extendedbelow 80 ft 1.1 km/h 0.68 mphDrive speed - raised/extendedabove 80 ft 0.55 km/h 0.34 mphGradeability - stowed** 40% 40%Turning radius - axle retracted: inside 4.01 m 13 ft 2 in
outside 6.75 m 22 ft 2 inTurning radius - axle extended: inside 2.59 m 8 ft 6 in
outside 5.74 m 18 ft 10 inControls 12 V DC proportionallTyres - RT lug - Foam filled 445/65 D22.5
POWERPower source Deutz TD 2011 L04i 4-cylinder turbo diesel 55 kW (74 hp)Auxiliary power unit 12 V DC 12 V DCHydraulic tank capacity 208 L 55 galFuel tank capacity 151 L 40 gal
WEIGHT***
20,739 kg 45,721 lbs
STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
www.genieindustries.com
Brisbane (Head Offi ce)
33 Kimberley StreetDarra QLD 4076
Sydney
74 Glendenning RoadGlendenning NSW 2761
Melbourne
374 Hammond RoadDandenong VIC 3175
Perth
83 Bannister RoadCanning Vale WA 6155
Genie Australia – Toll free number 1800 788 633 Distributed by:
18340 NE 76th StreetP.O. Box 97030Redmond, Washington 98073-9730
Genie United States
Effective Date: April, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual forinstructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment isthe standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries,Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries, Inc.in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.
S-125 090327 Ver1
PRODUCTIVITY
• Platform swing gate• Half mesh platform inserts with swing
gate• Platform top auxiliary rail• Air line to platform• Fire resistant hydraulic oil• Biodegradable hydraulic oil• Basic hostile environment kit• Deluxe hostile environment kit • Deluxe aircraft protection package (6 ft platform only)• Tool tray• Fluorescent tube caddy• Platform work lights• Front driving lights• Lockable platform control box covers• 1.83 m (6 ft) steel platform
POWER OPTIONS
• 240 V power to platform• 7 kVA hydraulic generator (240 V/50 Hz)• Cold Weather Packages• Diesel scrubber/spark arrestor muffler• Retained key selector switch
OPTIONS & ACCESSORIESMEASUREMENTS
S™-125
• 40.15 m (131 ft 2 in) working height• 24.38 m (80 ft) horizontal reach• 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform• 1.52 m (5 ft) jib boom with 135°
working range• 4WD• 4WS• Extendable axles• Rough terrain foam-filled tyres• Self-leveling platform• Hydraulic platform rotation• Fully proportional Hall effect
joystick controls• Hydraulic oil cooler• Drive enable • Horn• Hour meter• Tilt alarm• Descent alarm• Motion alarm• 360° continuous turntable rotation• Locking turntable covers• Positive traction drive• Two speed wheel motors• Configurable controls to limit
maximum height to 24.38 m (80 ft)or 30.48 m (100 ft)
• Ground control box cover• Engine status display• Thumb rocker steer • Dual flashing beacons
POWER
• 12 V DC auxiliary power• Deutz turbo diesel 55 kW (74 hp)• Anti-restart engine protection• Auto engine fault shutdown
STANDARD FEATURES
STM-125SELF-PROPELLED TELESCOPIC BOOMS
Features
www.genieindustries.com
C
D
E
A
B
F
G
MODEL STM-85
C
D
E
A
B
F
G
STM-85SELF-PROPELLED TELESCOPIC BOOM
Specifications
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
RANGE OF MOTION STM-85 MEASUREMENTS Metric US
Working height maximum* 27.90 m 91 ftPlatform height maximum 25.90 m 85 ftHorizontal reach maximum 23.30 m 76 ft 6 inBelow ground reach 2.89 m 9 ft 6 in Platform length 0.91 m 3 ft Platform width 2.44 m 8 ft Height - stowed 2.80 m 9 ft 2 in Length - stowed 12.20 m 40 ft Length - transport (jib tucked under) 11.60 m 38 ft Width 2.49 m 8 ft 2 in Wheelbase 2.84 m 9 ft 4 in Ground clearance - centre 0.33 m 13 in
PRODUCTIVITY
Lift capacity 227 kg 500 lbsPlatform rotation 160° 160°Vertical jib rotation 135° 135°Turntable rotation 360° continuousTurntable tailswing 1.42 m 4 ft 8 inDrive speed - stowed 5.6 km/h 3.5 mphDrive speed - raised/extended 1.1 km/h 0.68 mphGradeability - stowed** 45% 45%Turning radius - axle extended: inside 3.66 m 12 in
outside 6.55 m 21 ft 6 inControls 12 V DC proportionalTyres - RT lug - Foam filled 18-625, 16ply
POWER
Power source Deutz TD2011 L04i 4 cylinder turbo diesel 55 kW (74 hp)Auxiliary power unit 12 V DC 12 V DCHydraulic tank capacity 150 L 40 galFuel tank capacity 132 L 35 gal
WEIGHT***
16,992 kg 37,467 lbs
STANDARDS COMPLIANCE ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
www.genieindustries.com
Brisbane (Head Offi ce)
33 Kimberley StreetDarra QLD 4076
Sydney
74 Glendenning RoadGlendenning NSW 2761
Melbourne
374 Hammond RoadDandenong VIC 3175
Perth
83 Bannister RoadCanning Vale WA 6155
Genie Australia – Toll free number 1800 788 633 Distributed by:
18340 NE 76th StreetP.O. Box 97030Redmond, Washington 98073-9730
Genie United States
Features
S-85 090327 Ver1
STM-85SELF-PROPELLED TELESCOPIC BOOMS
PRODUCTIVITY
• Platform swing gate • Half mesh platform inserts
with swing gate• Platform top auxiliary rail• Air line to platform• Deluxe hostile environment kit • Tool tray• Lockable platform control box covers• Platform work lights • Front driving lights• 1.83 m (6 ft) steel platform
POWER OPTIONS
• 7 kVA hydraulic generator (240 V/50 Hz)• Cold Weather Packages• Diesel spark arrestor muffler• 240 V power to platform
OPTIONS & ACCESSORIESMEASUREMENTS
• 27.90 m (91 ft) working height• 23.30 m (76 ft 6 in) horizontal reach• 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform• 1.52 m (5 ft) jib boom with 135°
working range• 4WD• Full-time active oscillating axle• Self-leveling platform• Hydraulic platform rotation• Fully proportional Hall effect
joystick controls• Thumb rocker steer• Drive enable• Tilt alarm• Motion alarm• Descent alarm• Horn• Hour meter• 360° continuous turntable rotation• Locking low profile turntable covers• Positive traction drive• Two speed wheel motors• Hydraulic oil cooler• Alarm package• Second battery• Dual flashing beacons
POWER
• 12 V DC auxiliary power• Anti-restart engine protection• Auto engine fault shutdown• Engine gauge package
STANDARD FEATURES
Effective Date: April, 2009. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual forinstructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment isthe standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation, Genie Industries,Inc. and/or their subsidiaries in the U.S.A. and many other countries and all rights are reserved. Terex® is a Registered Trademark of Terex Corporation in the U.S.A. and many other countries. Genie is a Registered Trademark of Genie Industries,Inc. in the U.S.A. and many other countries. Genie is a Terex Company. © 2009 Terex Corporation.