Specification for Tool Room Machineries & Metrology Equipments

Technical Specifications of Tool Room Machines for High Learning Centres

1

Name of the Machine : Lathe Qty. : 04 Nos.

Sl. No. Specification Unit

Range/Value

1 Height of the Center mm 100 - 125

2 Centre distance mm 350 – 500

3 Maximum Swing over bed mm 200 – 250

4 Swing over cross slide mm 150 - 250

5 Cross slide travel mm 100 – 125

6 Type of Bed Straight

7 Headstock All geared

8 Spindle Speed rpm 150 – 3000

9 Metric Threads mm 0.5 – 7

10 Inch Thread TPI 56 - 4

11 Lead screw STD.

12 Tool dimension mm To be specified by

the bidder

13 Tail stock shank diameter mm 40 – 50

14 Tail stock shank travel mm 100 – 125

15 Tail stock taper STD.

Accessories: � Three Jaw chuck (ø 150 mm) with Adapter

� Four Jaw chuck (ø 200 mm) with Adapter � Quick change Tool Post � Coolant System with splash guard � Machine Lamp � Live & Dead Center

� Foot Brake � Oil gun � Chuck guard � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)

Technical Specifications of Tool Room Machines for High Learning Centers

2

Name of the Machine : Vertical Milling Machine (Ram Type) Qty. : 04 Nos.

Sl.

No. Specification Unit Range/Value

1. Work Table Area mm (1000 – 1100) x (200 – 250)

2. Longitudinal mm 700 – 800

3. Cross (Transverse) mm 275 – 325

4. Vertical mm 350 – 450

5. Ram Travel mm 300 – 325

6. Quill Travel mm 100 – 125

7. Spindle Speed rpm 45 – 3500 (infinitely variable)

8. Spindle Taper ISO-40

9. Longitudinal Feed mm / min To be specified by the bidder

10. Traverse Feed mm / min To be specified by the bidder

11. Vertical Feed mm / min To be specified by the bidder

12. Swivel of Milling Head to either

side

degree 45

13. Arm Swivel degree 360

Accessories: � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up to20

mm) � Coolant System with splash guard � Machine Lamp

� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)


3

Name of the Machine : Vertical Milling Machine (Ram Type) with DRO Qty. : 04 Nos.

Sl.


1. Work Table Area Mm (1000 – 1100) x (200 – 250)

2. Longitudinal mm 700 – 800

3. Cross (Transverse) mm 275 – 325

4. Vertical mm 350 – 450

5. Ram Travel mm 300 – 325


7. Spindle Speed rpm 45 – 3500 (infinitely variable)


9. Longitudinal Feed mm / min To be specified by the bidder

10. Traverse Feed mm / min To be specified by the bidder

11. Vertical Feed mm / min To be specified by the bidder

12. Swivel of Milling Head to either

side

degree 45

13. Arm Swivel degree 360

Accessories:

� Precision Machine Vice 6” � Collet chuck with set of Collets (up

to 20 mm) � 3 axis Digital Read Out Systems

with a resolution of 0.005 mm � Coolant System with splash guard � Machine Lamp

� Oil gun � Clamping Kit � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder

to specify)


4

Name of the Machine : Vertical Milling Machine (Column / Knee Type) Qty. : 04 Nos.

Sl.


1. Work Table Area mm 1350 x 350

2. Longitudinal mm (800-830)Automatic/Manual

3. Cross (Transverse) mm (230-260) Automatic /Manual

4. Vertical mm 400-425mm (Auto/ manual)


6. Spindle Speed rpm Up to 2500


8. Longitudinal Feed mm / min Bidder to specify

9. Traverse Feed mm / min Bidder to specify

10. Vertical Feed mm / min Bidder to specify

11. Rapid Traverse

Longitudinal

mm/min

Bidder to specify

12. Traverse mm/min Bidder to specify

13. Vertical mm/min Bidder to specify

Accessories: � Reduction Milling Sockets MT1, MT2,

MT3 & MT4 � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up to20

mm) � Coolant System with splash guard

� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)


5

Name of the Machine : Horizontal Milling Machine Qty. : 04 Nos.

Sl. No. Specification Unit Range/Value

1. Work surface of the Table mm (1000 – 1200) x (200 – 250)

2. Longitudinal travel mm 500 – 600

3. Cross (Transverse) Travel mm 250 – 275

4. Vertical Travel mm 400 – 425


6. No. of Progression Bidder to specify

7 Spindle Taper ISO 40

8. Height of Spindle center to Table mm 0 – 350

9. Longitudinal Feed (Auto) mm / min 20 – 250

10. Traverse Feed (Auto) mm / min 20 – 250

11. Rapid Traverse Longitudinal &

Traverse

mm/min Bidder to specify


MT3 & MT4 � Precision Machine Vice 8” � Clamping Kit � Milling Arbors � Cutter Sleeves � Draw Bar � Coolant System with splash guard � Machine Lamp

� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder

to specify) � 3 Axes DRO with 0.005 mm

resolution � Rotary Table 350 mm � Indexing Head


6

Name of the Machine : Universal Milling Machine Qty. : 04 Nos.

Sl. No. Specification Unit Range/Value

1. Work surface of the Table mm (1000 – 1200) x (200 – 250)


3. Cross (Transverse) Travel mm 250 – 275

4. Vertical Travel mm 400 – 425


6. No. of Progression Bidder to specify

7 Spindle Taper ISO 40

8. Height of Spindle center to Table mm 0 – 350

9. Longitudinal Feed (Auto) mm / min 20 – 250

10. Traverse Feed (Auto) mm / min 20 – 250

11. Rapid Traverse Longitudinal &

Traverse


12 Swivel of the Table on either side degree 45


MT3 & MT4 � Precision Machine Vice 8” � Clamping Kit � Milling Arbors � Cutter Sleeves � Draw Bar � Coolant System with splash guard

� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify) � 3 Axes DRO with 0.005 mm resolution


7

Name of the Machine : Shaping Machine Qty. : 04 Nos.

Sl. No. Specification

Unit

Range/Value

1. Table size mm 450 x 350

2. Length of Stroke mm 400 – 450

3. Vertical Travel of the Table mm 300 – 325

4. Distance between Table to Ram mm 50 – 70 (min.)

325 – 375 (max.)

5. Ram Cycle / min 15 – 100

Accessories: � Machine Vice 8” � Angle Plate 8” & 12” ( 01 each) � C – Clamp 4”, 6” & 8” (01 each) � One set of manuals

� One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)


8

Name of the Machine : Radial Drilling Machine Qty. : 04 Nos.

Sl.


1. Max. Drilling Capacity mm 25 – 32

2. Drilling Radius mm 275 – 750

3. Distance between Spindle nose

and base of the machine

mm 250 – 700

4. Spindle Speed rpm 100 – 1750

5. Spindle Taper MT – 3 / MT - 4

6. Spindle Traverse mm 140 – 150

7. Feed mm / rev. Bidder to specify

Accessories: � Box Shape Worktable to suit the machine

(250 x 250 x 250 mm) � Machine Vise 8” � Taper / Reduction sleeves � Quick Change Drill Chuck � Coolant Equipment

� Machine Lamp � Drifts � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)


9

Name of the Machine : Bench Drilling Machine Qty. : 04 Nos.

Sl.


1. Max. Drilling Capacity mm 12 - 15

2. Table working surface mm 200 – 250

3. Distance between Spindle centre to

pillar front

mm 140 – 150

4. Distance between Spindle to table mm 300 – 350

5. Distance between Spindle & Base mm 500 – 525

6. Spindle Traverse mm 75 – 100

7. Feed mm / rev. Bidder to specify

Accessories: � Taper / Reduction sleeves � Drill Chuck � Drifts � One set of manuals


specify)


10

Name of the Machine : Surface Grinding Machine (Hydraulic) Qty. : 04 Nos.

Sl.


1. Working Area mm (300 – 350) x (150 – 175)

2. Height of the Table to Grinding

Wheel

mm 175 – 225

3. Speed of the Grinding Wheel rpm Bidder to specify

4. Longitudinal feed (Hydraulic) -- Bidder to specify range / rate

5. Cross feed of the table / Auto Feed

with micrometer graduation

-- Bidder to specify range / rate

6. Vertical feed (wheel head) -

Hydraulic

--- Bidder to specify range / rate

7. Spindle Orientation -- Vertically adjustable

Horizontal spindle

Accessories: � Machine Lamp � Magnetic Chuck � Diamond Tool with holder � Coolant equipment with splash guard � Wheel Balancing stand � Wheel guard � One set of manuals


specify) � Complete with all required electrical

motors � Grinding wheel (Al2O3 ) – 02 Nos.


11

Name of the Machine : Cylindrical Grinding Machine Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Type mm Hydraulic

2. Max. Grinding Diameter mm 125 – 150

3. Max. Grinding length mm 200 - 250

4. Max. Distance between centers mm 200 - 250

5. Table travel (Automatic) mm Bidder to specify

6. Table Swivel degree ± (8 - 10)

7. Wheel head swivel degree ± 45

8. Rapid wheel movement mm Bidder to specify

9. Automatic in feed mm Bidder to specify

10. Plunge feed mm 0 - 0.05

11. Plunge travel mm 0.3 – 0.5

12. Grinding Wheel diameter mm Bidder to specify

13. Wheel width mm Bidder to specify

14. Wheel speed rpm Bidder to specify

15. Work head rpm 80 – 800

16. No. of speed No. Bidder to specify

17. Work head Swivel degree ±( 30 - 45)

Accessories: � Three Jaw chuck (ø 150mm) � Dogs & Carriers (5 – 30 mm) � Machine Lamp � Diamond Tool with holder � Coolant equipment with splash guard � Wheel Balancing stand

� Wheel guard � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify) � Grinding wheel (Al2O3 ) – 02 Nos.


12

Name of the Machine : Tool & Cutter Grinding Machine Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Table size mm (450 – 500) x (75 – 100)

2. Table travel mm 350 – 425

3. Cross travel of the table mm 150 – 200

4. Wheel head swivel degree 360

5. Swivel of the Table degree 60

6. Swivel of Work head – Horizontal degree 60

7. Swivel of Work head – Vertical degree 360

8. Grinding spindle speed rpm Bidder to specify

Accessories: � End mill , reamer grinding attachment � Drill, Taps grinding attachment

(Straight / taper shank) � Lathe tools grinding attachment � Radius tools / cutters grinding

attachment � Wheel head tooth rest with extension

bar � Grinding wheel guards

� Grinding wheel flanges (different sizes)

� Machine Lamp � Diamond Tool with holder � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify) � Different Grinding wheel (Cup, saucer,

taper, straight etc.)


13

Name of the Machine : Pedestal Grinder (Double ended) Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Wheel Size mm 250 x 25 x 31.75 /

300 x 40 x 50.8

2. Wheel Center Distance mm 600 – 650

3. Distance between base and wheel spindle

mm 800 – 900

Accessories: � Wheel guard � Tool Rest � One set of Service Tools


14

Name of the Machine : Power Hacksaw Machine (Hydraulic) Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Max. size of material to be cut mm 200 – 300

2. Stroke length mm 100 – 160

3. No. of Speed strokes --- Bidder to specify

4. Power Hacksaw blade Bidder to specify

Accessories: � Work holding device � Coolant system / equipment � Work rest � Adjustable material stop

� One set of manual � One set of service tools


15

Name of the Machine : Hydraulic Press (C - Type) Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Capacity Tonnage 05

2. Stroke Length mm 200 – 250

3. Daylight mm 250 – 300

4. Shut Height mm 50 – 75

5. Platen size mm 300 – 350

6. Approach speed mm / sec Bidder to specify

7. Pressing speed mm / sec. Bidder to specify

8. Return speed mm / sec. Bidder to specify

9. No. of cylinders No. Bidder to specify

Accessories: � Standard accessories � One set of manual � One set of service tools


16

Name of the Machine : 2 Dimensional Pantograph Engraving Machine Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Copying Ratio --- 1:1 to 1:50

2. Work Table

a. Table Size mm (400 – 450) x (200 – 250)

b. Longitudinal Movement Mm 200 – 250

c. Traverse Movement mm 150 – 160

d. Vertical Movement mm 200 – 250

3. Master Table Size mm (400 – 450) x (200 – 250)

4. Spindle Speed / range rpm Bidder to specify

5. Cutter Diameter (Max) mm Up to 12

6. Rapid Movement, Micrometer feed, Micrometer graduation

-- Bidder to specify

Accessories: � Clamping Kit � Letter templates (Positive & Negative)

with template holder � Standard accessories like stylus

holder, stylus etc.

� Collets of different sizes (3, 4, 5, 6, 8, 10 & 12 mm)

� One set of manual � One set of service tools � Standard spares for 2 years

Note: The machine should be supplied along with Single Lip Cutter Grinder with standard accessories to suit the quoted pantograph engraving machine.


17

Name of the Machine : Small Mill (Lab / Table Top Model) Qty. : 04 Nos.

Sl.


1. Work table effective area mm (500 – 550) x (150 – 175)

2. Drilling capacity mm 20 – 25

3. End Mill capacity mm 20 – 25

4. Face Mill capacity mm 50 – 60

5. Spindle Stroke mm 75 – 100

6. Distance between Spindle &

Table

mm 300 – 350

7. Spindle Speed rpm 80 - 2000

8. Spindle Taper MT 3 / MT 4


10. Cross Travel Mm 150 – 175

11. Auto feed Longitudinal / Cross

travel



MT3 & MT4 � Precision Machine Vice 4” � Clamping Kit � Collet chuck with set of Collets (up to

20 mm)

� Machine Lamp � Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder

to specify)


18

Name of the Machine : CNC Lathe (Trainer / Lab Model) Qty. : 04 Nos.

Sl.

No. Specification

Unit

Range/Value

1. Optimum Cutting Diameter mm 125 – 150

2. Swing over Table / Bed mm 125 – 150

3. Swing over Cross Slide mm 250 – 280

4. X axis Travel mm 275 – 325

5. Z axis Travel mm 175 – 200

6. Spindle speed rpm 50 – 5000

7. Axis Positioning mm ± 0.005 or more

8. Axis repeatability mm ± 0.002 or more

9. Feed Rate m / min 10 – 15

10. Rapid Travel in X / Z axis m / min 15 – 20

11. Type of Control --- Fanuc oi / Siemens / Haas / Equivalent

Accessories:

� 3 Jaw ø 100 mm Manual scroll chuck � Coolant pump / system � 6 / 8 position Tool Holder (Gang Tooling) � Hard disk drive & Ethernet interface with

USB support

� Machine Lamp � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)


19

Name of the Machine : CNC Milling Machine (Trainer Model) Qty. : 04 Nos.

Sl.


1. Work Table Size mm (450 - 500) x (200 – 250)

2. X Axis Travel mm 450 – 500

3. Y Axis Travel mm 275 – 325

4. Z Axis Travel mm 325 – 350

5. Distance between Spindle & Table mm Min: 75 – 100

Max.: 400 – 450

6. Max. Feed Rate (X, Y, Z) mm / min 5000

7. Rapid Traverse (X, Y, Z) m / min 8 – 10

8. Spindle Speed rpm 7500 – 8000

9. Spindle Taper ISO 30 / ISO 40

10. CNC Control Fanuc/ Siemens / Mitsubishi /

Heidenhein

11. Accuracy mm ± 0.005 or more

12. Repeatability mm ± 0.01or more

13. Resolution mm ± 0.005 or more

Accessories: � Precision Machine Vice 6” � Clamping Kit � Collet chuck with set of Collets (up

to20 mm) � Coolant System with splash guard � Machine Lamp

� Oil gun � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder

to specify)


20

Name of the Machine : CNC EDM Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Work Tank Size mm (750 – 850) x (500 – 550) x (250 – 350)

2. Axis Travel a. X Axis mm 275 - 325 b. Y Axis mm 175 – 225 c. Z Axis (Ram Travel) mm 250 – 300 d. Axis positioning resolution mm 0.001 (min.) 3. Best Surface finish micron 0.2 – 0.5 (Ra value) 4. Dielectric System a. Volume Bidder to specify

b. Filter method -- Paper Filter (size to specify) c. Type of Flushing To be specified 5. Power supply unit / Spark generator a. Max. Machining Current Amp 25 – 30 b. Max. Machining Speed mm3 / min Bidder to specify c. Electrode wear rate % Bidder to specify 6. CNC Controller a. Closed loop linear scale feedback on X. Y & Z axes b. Dialogue programming for selecting optimum machining

conditions / parameters

c. Canned orbit cycles for commonly used machining modes d. Automatic Edge / Center finding & Z ref. location e. 3 Axis linear, 2 Axis arc, 3 Axis spiral and 4 Axis contouring

offset movement

f. 14” CRT monitor with graphics, ASCII / Keyboard / Isolated RS 232 Serial interface, USB port & Ethernet

g. Sub programming i. Multiple Z axis automatic machining depth J. Set of working parameters & database k. Full function remote control for all the axes

Accessories: � Work head � Tool Box / kit � Filter set � Work / Machine Lamp � Clamping kit � 3 R Clamping Tool set along with set of

collets � C - Axis

� Precision machine vise 4” � Flush aids � One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)

Additional Equipments required:

1. Servo Stabilizer with Isolation Transformer to suite the machine capacity

2. Chiller


21

Name of the Machine : CNC Wirecut EDM Qty. : 04 Nos.

Sl. No.

Specification Unit

Range/Value

1. Axis Travel a. X Axis mm 225 – 275

b. Y Axis mm 325 – 400 c. U & V Travel mm 50 – 60 each

2. Max. work piece height mm 175 – 225

3. Maximum Taper angle 0/ mm 7 – 10 / 50 4. Surface finish micron 1 – 1.2 (Ra value)

5. Maximum Cutting speed mm2 / minute 70 – 75 6. Resolution mm 0.001

7. Positioning accuracy mm ± 0.005

8. Control Axes ---

X, Y, U, V & Z Simultaneous / Independent

9. Interpolation --- Linear / Circular

10. Least input increment mm 0.001

11. Data input / output ---

ASCII / Keyboard / Isolated RS 232 Serial interface, USB port & Ethernet

12. Display -- 15” colour display

13. Control System ---

32 bit, 1 – CPU, closed loop software servo system

14. Machining Feed control -- Servo / Const. feed 15. Scaling --- Bidder to specify

16. Technology --- Bidder to specify

17. Wire diameter mm 0.15 – 0.3 18. Wire alignment --- Bidder to specify

Accessories: � Standard Accessories like wire guide,

paper filter, flushing nozzle, wire alignment jig,

� Tool Box / kit � Clamping kit

� One set of manuals � One set of Service Tools, Keys � Standard spares for 2 years (bidder to

specify)

Additional Equipments required:

1. Servo Stabilizer with Isolation Transformer to suite the machine capacity

2. Chiller

3. Air Compressor


22

Name of the Machine : CNC Lathe / Milling Programming Module Qty. : 4 Nos.

Haas Control SimulatorHaas Control SimulatorHaas Control SimulatorHaas Control Simulator

Control Simulator Module (110 volt); dual software (mill and lathe), LCD display, USB port


23

Name of the Equipment : Metrological instruments Qty. : 04 sets

Sl. Name of the Instrument Range / Specification Resolution Qty. 1. Digimatic Vernier 0 – 300 mm 0.001 mm 02 2. Vernier Caliper 0 – 200 mm 0.02 mm 05 3. Vernier Caliper 0 – 300 mm 0.02 mm 02 4. Vernier Depth Gauge 0 – 300 mm 0.02 mm 03 5. Digimatic Height Gauge 0 – 1000 mm 0.01 mm 01 6. Vernier Height Gauge 0 – 1000 mm 0.02 mm 01 7. Outside Micrometer set 0 – 100 mm (0 -25 , 25 -50, 50 –

75, 75 – 100, 0.01 mm 01

set 8. Depth Micrometer 0 – 300 mm 0.001 mm 01 9. Inside Micrometer 5 – 100 mm 0.01 mm 01

set 10. Dial indicator 0 – 5 mm 0.01 mm 02 11. Dial indicator 0 – 10 mm 0.01 mm 02 12. Dial indicator 0 – 1 mm 0.001 mm 02 13. Bore Gage set with standard Dial

Indicator 18 – 150 mm 0.01 mm 01

set 14. Dial Test Indicator 0 – 1 mm 0.01 mm 02 15. Dial Test Indicator 0 – 1.6 mm 0.01 mm 02 16. Gauge Block Set 122 block set Grade K 01 17. Gauge block accessories 22 pcs/ set (upto 100 mm) - 01 18. Sine Bar 200 mm -- 02 19. Granite Surface Plate 1500 x 1000 x 200 mm - 01 20. Precision Squares 200 x 130 mm 02 21. Precision Squares 300 x 200 02 22. Combination Square set 300 mm 03 23. Universal Bevel Protractor 150 mm 5” 03

24. Universal Bevel Protractor 300 mm 5” 01

25. Precision Level 200 x 44 x 200 mm 0.02 mm / m 01

26. Thickness gage 0.05 – 1 mm 0.01 / 0.05 mm 01

27. Radius gage 0.4 – 6mm 0.25 / 0.5 mm 01

28. Radius gage 1 – 7 mm 0.25 / 0.5mm 01

29. Radius gage 7.5 – 15 mm 0.5 mm 01

30. Radius gage 15.5 – 25 mm 0.5 / 1.0 mm 01


24

Name of the Equipment : Optical Profile Projector Qty. : 04 Nos.

Sl.


1. X, Y Axis measuring Travel mm 200 x 100

2. Precision measuring stage mm 125 X 375 mm

3. Resolution mm 0.001

4. Focus mm 100

5. Three lens turret mount with 10x lens

6 Magnification -- 10 X, 20 X, 50 X

7 Diameter of Screen mm 350 – 450

8 Digital angle display and the screen with 0.01o resolution

Accessories

� X,Y and angle readouts

� Connectivity to PC (Software)

� Duplex fiber optic surface

illumination

� Green Filter condenser lens

� Oblique Reflection mirror

� Holder with clamp

� V-Black with clamp for maximum

work piece diameter 25mm

� Geometrical function measuring

software, scaleboards & DXF

format CAD/CAM interface

� One set of manuals

� Set of service tools

� Standard set of spares


25

Name of the Equipment : Tool Maker’s Microscope Qty. : 04 Nos.

Sl.


1. X, Y Axis measuring Travel mm (50 – 60) x (50 – 60)

Table Top Size mm 150 x 150

Effective Table Area mm 100 x 100

Observation image type -- Erect image

Angle Reading Range degree 360

Eyepiece --- 15 X

Objective --- 2 X

Measuring Method -- With micrometer head

6 Total magnification -- 30 X

Colour & Surface illumination --- With green filter,

adjustable light intensity

Accessories

� 10 X, 20 X eyepiece

� 5 X , 10 X Objective

� Digimatic micrometer head

� Dial indicator attachment for Z axis

� Work piece clips

� Rotary table

� V Block with clamp

� Rectile and other accessories for

Metric / Withworth threads

� One set of manual

� Set of service tools

� Standard set of spares

Specification for Tool Room Machineries & Metrology Equipments

Documents

Transcript of Specification for Tool Room Machineries & Metrology Equipments