SPECIFICATION SHEET 715S-SS-Top...2017/05/17 · 715S-TT3-2SSS-0 10 gal. SS remote fill box, DEF,...
4
Model 715 & 715S Remote Fill Box - Top Connection SPECIFICATION SHEET The Morrison 715 Series remote fill box is a simple 10 gallon capacity cabinet that provides containment of small spills during tank filling operations. Each unit is supplied with tank mount brackets for easy installation on storage tanks. Features • 10 gallon (37.85 liter) capacity • 3″ male NPT threaded top connection • Vented and weatherproof • Hinged door is lockable with a padlock • Bottom sloped (right to left) toward drain and pump mounting location; drains on left side • Vapor recovery mounting bracket integrated into the cabinet exterior • Vapor recovery adaptor, cap, and u-bolt kits are available • Available with hand pump assembly, ball valve, quick disconnect check valve coupler/adaptor, dry disconnect adaptor, and dust cap/plug in 2″ or 3″ configuration • All connection assemblies are factory installed and tested prior to shipping. • DEF, Aviation, and E-85 models are available • Post mount kits and four-leg stands are available in powder coated steel • Four-leg stands are also available in stainless steel Construction Details • Box and door are 14-gauge steel, powder coated white, or 304 stainless steel • Ball valve is Morrison 691 series brass or 691BSS series stainless steel • Quick disconnect coupler and plug are aluminum, anodized aluminum, or stainless steel • Quick disconnect adaptor and cap are anodized aluminum • Dry disconnect adaptor and cap are aluminum, anodized aluminum, or stainless steel Vapor recovery kit • Vapor recovery adaptor is aluminum with Viton ® • Vapor recovery cap is aluminum, powder coated orange • Hand pump is steel construction, Teflon ® seals with Viton ® o-rings, or stainless steel with Teflon ® and Viton ® Box dimensions • Width = 24¼″ Height = 28¾″ Depth = 19″ Approvals Florida DEP EQ-787; meets the new and revised requirements for CAN-ULC-S663-11 (effective September 25, 2015) Fig. 715 Fig. 715S Part numbers on next page.
Transcript of SPECIFICATION SHEET 715S-SS-Top...2017/05/17 · 715S-TT3-2SSS-0 10 gal. SS remote fill box, DEF,...
Model 715 & 715S Remote Fill Box - Top ConnectionSPECIFICATION SHEET
The Morrison 715 Series remote fill box is a simple 10 gallon capacity cabinet that provides containment of small spills during tank filling operations. Each unit is supplied with tank mount brackets for easy installation on storage tanks.
Features• 10 gallon (37.85 liter) capacity• 3″ male NPT threaded top connection • Vented and weatherproof • Hinged door is lockable with a padlock• Bottom sloped (right to left) toward drain and pump mounting
location; drains on left side• Vapor recovery mounting bracket integrated into the cabinet
exterior• Vapor recovery adaptor, cap, and u-bolt kits are available • Available with hand pump assembly, ball valve, quick
disconnect check valve coupler/adaptor, dry disconnect adaptor, and dust cap/plug in 2″ or 3″ configuration
• All connection assemblies are factory installed and tested prior to shipping.
• DEF, Aviation, and E-85 models are available• Post mount kits and four-leg stands are available in powder coated steel• Four-leg stands are also available in stainless steel
Construction Details• Box and door are 14-gauge steel, powder coated white, or 304 stainless steel• Ball valve is Morrison 691 series brass or 691BSS series stainless steel• Quick disconnect coupler and plug are aluminum, anodized aluminum, or stainless
steel• Quick disconnect adaptor and cap are anodized aluminum• Dry disconnect adaptor and cap are aluminum, anodized aluminum, or stainless steelVapor recovery kit
• Vapor recovery adaptor is aluminum with Viton®
• Vapor recovery cap is aluminum, powder coated orange• Hand pump is steel construction, Teflon® seals with Viton® o-rings, or stainless
steel with Teflon® and Viton®
Box dimensions• Width = 24¼″ Height = 28¾″ Depth = 19″
ApprovalsFlorida DEP EQ-787; meets the new and revised requirements for CAN-ULC-S663-11 (effective September 25, 2015)
Fig. 715
Fig. 715S
Part numbers on next page.
Item Number Description Weight
715--T00-0000-0 10 gal. Remote fill box, no outlet 101 lbs
715-TT3-0000-0 10 gal. Remote fill box, fill box only 135 lbs
715--TT3-000B-0 10 gal. Remote fill box, w/ hand pump assembly
715--TT3-2QBB-0 10 gal. Remote fill box, male threads, with hand pump, with 2” 90 female quick disconnect check & ball valve 141 lbs
715-TT3-2MBB-0 10 gal. Remote fill box, male quick disconnect with ball valve & hand pump 141 lbs
715--TT3-3QBB-0 10 gal. Remote fill box, male threads, with hand pump, with 3” 90 female quick disconnect check & ball valve 144 lbs
715--TT3-3MBB-0 10 gal. Remote fill box, male quick disconnect with cap 144 lbs
715--TT3-2DBB-0 10 gal. Remote fill box, male threads, with hand pump, with 2” 90, dry-disconnect & ball valve 143 lbs
715--TT3-3DBB-0 10 gal. Remote fill box, male threads, with hand pump, with 3” 90, dry-disconnect & ball valve 158 lbs
715--TT3-2MB0-0 10 gal. Remote fill box, male quick disconnect with ball valve
715--TT3-3MB0-0 10 gal. Remote fill box, male quick disconnect with ball valve
715--TT3-2QB0-0 10 gal. Remote fill box, with quick disconnect & ball valve, no hand pump
715--TT3-2DS0-0 10 gal. Remote fill box, Aviation, with HC dry-disconnect & SS ball valve
715--TT3-2DSE-0 10 gal. Remote fill box, E-85, with HC dry-disconnect, SS ball valve & hand pump
715S-TT3-0000-0 10 gal. SS Remote fill box, fill box only 135 lbs
715S-TT3-2QBB-0 10 gal. SS Remote fill box, male threads, w/hand pump, with 2” 90 female quick disconnect check & ball valve 132 lbs
715S-TT3-2MBB-0 10 gal. SS Remote fill box, male quick disconnect 132 lbs
715S-TT3-3QBB-0 10 gal. SS Remote fill box, male threads, w/hand pump, with 3” 90 female quick disconnect check & ball valve 144 lbs
715S-TT3-3MBB-0 10 gal. SS Remote fill box, male quick disconnect 144 lbs
715S-TT3-2DBB-0 10 gal. SS Remote fill box, male threads, w/hand pump, with 2” 90, dry-disconnect & ball valve 135 lbs
715S-TT3-3DBB-0 10 gal. SS Remote fill box, male threads, w/hand pump, with 3” 90, dry-disconnect & ball valve 148 lbs
715S-TT3-2DS0-0 10 gal. SS remote fill box, Aviation, with HC dry-disconnect & SS ball valve
715S-TT3-3DS0-0 10 gal. SS remote fill box, Aviation, with HC dry-disconnect & SS ball valve
715S-TT3-2DSE-0 10 gal. SS remote fill box, E-85, with HC dry-disconnect, SS ball valve, & hand pump
715S-TT3-2MBE-0 10 gal. SS remote fill box, E-85
715S-TT3-3DSE-0 10 gal. SS remote fill box, E-85, with HC dry-disconnect, SS ball valve & hand pump
715S-TT3-2ES0-0 10 gal. SS remote fill box, DEF, with SS dry-disconnect, & SS ball valve
715S-TT3-2ESS-0 10 gal. SS remote fill box, DEF
715S-TT3-2SS0-0 10 gal. SS remote fill box, DEF, with SS quick disconnect & SS ball valve
715S-TT3-2SSS-0 10 gal. SS remote fill box, DEF, with SS quick disconnect, ball valve & hand pump
715S-TT3-3SS0-0 10 gal. SS remote fill box, DEF, with SS quick disconnect & SS ball valve
715S-TT3-3SSE-0 10 gal. SS remote fill box, DEF, with SS quick disconnect & ball valve
715---VR30 AK 3” Vapor Recovery Kit
715---VR40 AK 4” Vapor Recovery Kit
715--P060 AK Post mount kit - 3” x 60” post with clamps and base
715---S400 AS 4 leg stand for 715 fill box, powder coated steel
715S--S400 AS 4 leg stand for 715 fill box, stainless steel
Model 715 & 715S Remote Fill Box -Top Connection (continued)SPECIFICATION SHEET
570 E. 7th Street, P.O. Box 238 | Dubuque, IA 52004-0238t. 563.583.5701 | 800.553.4840 | f. 563.583.5028
www.morbros.com
*Please consult Price List for additional options.
24.375
10.125 6.000
20.500
3.00” NPT.
3.000
28.760
10 GALLON SUMP AREA
24.000
30.230
GROUNDSTUD
VAPORRECOVERYBRACKETS
19.176
Top View
FronT View Less Door righT View
24.375
10.125 6.000
20.500
3.00” NPT.
3.000
28.760
10 GALLON SUMP AREA
24.000
30.230
GROUNDSTUD
VAPORRECOVERYBRACKETS
19.176
FoUr-Leg sTAnD
24.5”
20”
18.625”
Model 715 & 715S Remote Fill Box -Top Connection (continued)SPECIFICATION SHEET
Revised 2.10.2016
715 Part Numbering System
How to “Build-a-Box”
To order, simply select desired option from each category and insert the corresponding letter or number in the appropriate space below.
Example:
4" 323 Adaptor & Cap
Fill Box Construction- 10 gal. powder coated steelS 10 gal. 304 stainless steelF 7 gal. powder coated flush wall mount
Model Number
Component Size0 Box only2* 2” components3 3” components
* 3” to 2” transition between outlet fitting and ball valve.
Outlet Fitting0 No outlet fitting (715 only)2 2” Male NPT nipple (715F only)3 3” Male NPT nipple
Mounting StyleT Tank/Wall
Outlet LocationT TopK Back (available 1st quarter 2013)0 No outlet
Inlet Connection0 Box only
D Dry disconnect, hardcoated aluminum with stainless steel piston, Viton gaskets, and aluminum dust capE Dry disconnect, stainless steel body and piston, Viton gasket, and stainless steel dust cap (only available in 2”)
Q 90° quick disconnect aluminum female coupler with brass check valve, Viton seals, and aluminum dust plug S 90° quick disconnect stainless steel coupler with check valve, Viton seals, and aluminum dust plug
M 90° quick disconnect aluminum male adaptor with stainless steel check valve, Viton seals, and aluminum dust cap
Ball Valve0 Box onlyB Full port NPT ball valve with brass body, hard chrome plated ball & Teflon sealsS Full port, locking, NPT ball valve with stainless steel body and ball, Teflon seals
Open0 Box only
715 - - - - T T 3 2 Q B B 0
Additional Options: • 60” Post mount kit: 715---P060 AK• Stand: 715---S400 AS (4 leg stand, powder coated steel)• Stand: 715S--S400 AS (4 leg stand, stainless steel)• Vapor recovery kits: 715---VR30 AK (3”) and 715---VR40 AK (4”)
Vapor Recovery Kit
For a complete listing of 715 item numbers, please refer to the Morrison Price List.
Hand Pump Assembly0 No hand pump assemblyB Base Package* * Hand Pump Assembly Base Package: Steel constructed
hand pump with Teflon seals and Viton o-rings, reinforced polyurethane tubing, brass check valve and ball valve.
E E85 Package * Hand Pump Assembly E85 Package: Steel constructed
hand pump with Teflon seals and Viton o-rings, reinforced polyurethane tubing, stainless steel check valve and ball valve.
S Stainless Steel Package * Hand Pump Assembly Stainless Steel Package: Stainless
steel constructed hand pump with Teflon seals and Viton o-rings, reinforced polyurethane tubing, stainless steel check valve and ball valve.
*Option Q now has Viton seals (previously Buna seals)
570 E. 7th Street, P.O. Box 238 | Dubuque, IA 52004-0238t. 563.583.5701 | 800.553.4840 | f. 563.583.5028
www.morbros.com
