specialty polyolefinsSPECIALTY REACTIVE … · 18334 LLDPE 1 125 101 PE, PA, EVOH 18340 LLDPE 3 118...
Transcript of specialty polyolefinsSPECIALTY REACTIVE … · 18334 LLDPE 1 125 101 PE, PA, EVOH 18340 LLDPE 3 118...
A global chemical company and France’s leading chemicals producer, Arkema is building the future of the chemical industry every day. Deploying a responsible, innovation-based approach, we produce state-of-the-art specialty chemicals that provide customers with practical solutions to such challenges as climate change, access to drinking water, the future of energy, fossil fuel preservation and the need for lighter materials. With operations in more than 40 countries, some 14,000 employees and 10 research centers, Arkema generates annual revenue of €6.1 billion, and holds leadership positions in all its markets with a portfolio of internationally recognized brands.
Evasin®
ARK
EMA
- 42
0 ru
e d’
Estie
nne
d’O
rves
927
05 C
olom
bes
Ced
ex -
Fran
ce -
A F
renc
h so
ciét
é an
onym
e w
ith a
a s
hare
cap
ital o
f 27
0 03
5 92
3 eu
ros
Regi
ster
ed in
the
Nan
terr
e (F
ranc
e) T
rade
and
Com
pani
es R
egist
er u
nder
the
num
ber 4
45 0
74 6
85
4369
E/08
.201
4/20
- PO
F - P
hoto
s A
rkem
a, T
hink
stock
, Fot
olia
- C
once
ptio
n/Ré
alisa
tion
: Ryt
hmic
01
47 4
9 56
60
GradesEthylene content (% mol)
Melt index (g/10min) Melting point
(°C)Crystalization
point (°C)Glass transition
point (°C)
O2 Transmission Rate (65% RH)
(20°C)Main applications
190°C - 2.16kg 210°C - 2.16kg
2951-F 29 3 187 162 60 0.3 Bottles, pipes
3251-F 32 1.6 3.5 183 159 59 0.38 Bottles, sheets, fi lms
3851-F 38 1.6 3.7 173 151 54 0.71Sheets, thermoforming,
fi lms
4405-F 44 5.5 166 146 56 1.35Sheets, thermoforming,
shrinks, fi lms
4451-F 44 1.8 167 146 56 1.35Sheets, thermoforming,
shrinks, fi lms
Test methodASTM D1238
ISO 1133DSC
ISO 11357DSC
ISO 11357DMA
ISO 11357ASTM D3985 ISO 14663-2
Let’s progress together
specialty polyolefins
Let’s progress together
SPECIALTY REACTIVE POLYOLEFINS /
Lotader® / Orevac® / Evasin®Ethylene - Vinyl alcohol copolymers
The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, the data showed in the tables of this leafl et are typical values and cannot be considered as specifi cations. Arkema expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specifi c product designated and may not be,applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained,herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe any patent and the user is advised to take appropriate steps to be sure that,any proposed use of the product will not result in patent infringement.
See MSDS for Health & Safety Considerations. The information contained in this document is based on trials carried out by our Research Centres and data selected from the literature, but shall in no event be held to constitute or imply any warranty, undertaking, express or implied commitment from our part. Our formal specifi cations defi ne the limit of our commitment. No liability whatsoever can be accepted by Arkema with regard to the handling, processing or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.
Arkema has implemented an internal policy regarding the use of its products in medical devices applications that are in contact with the body or circulating bodily fl uids. In addition, except for limited cases as determined by the Medical Device Policy, Arkema strictly prohibits the use of any Arkema products in Medical Device applications that are implanted in the body or in contact with bodily fl uids or tissues for greater than 30 days.Arkema Functional Polyolefi ns are not designed neither produced in conditions suitable for medical device applications. Please contact Arkema sales representatives if you would like to use Arkema Functional Polyolefi ns in medical device applications.
Headquater: Arkema France 420, Rue d’Estienne d’Orves - 92700 Colombes - France
Tel.: 33 (0)1 49 00 80 80 - Fax: 33 (0)1 49 00 83 96arkema.com
lotader.comorevac.com
EUROPEHeadquater Arkema France420, rue d’Estienne d’Orves92700 COLOMBESFRANCETel.: (+33) 1 49 00 80 80Fax: (+33) 1 49 00 83 96
NORTH AMERICAArkema Inc.900 First Avenue - P.O. Box 6153619406-0936 KING OF PRUSSIA, PAUNITED STATES Tel.: (+1) 610 878 6500 Fax: (+1) 610 878 6400
ASIAArkema PTE Ltd - Branch Offi ce19th Floor, ITF Tower140/40 Silom Road,Suriyawonge Bangrak10500 BANGKOKTHAILAND Tel.: (+66) 2 237 62 57 Fax: (+66) 2 237 5797
SOUTH AMERICAArkema Quimica LtdAv. Ibarapuera 20334th fl or - Moema04029 - 901 SÃO PAULOBRAZIL Tel.: (+55) 11 21 48 85 22
Reactive group
Grades Acrylate
Properties (typical values) Main applications
Acrylate content (%)
Reactive group (%)
Melt index (g/10 min)
(190°C–2.16 kg)
Melting point (°C)
Vicat softening temp. (°C)
Tensile strength at break (MPa)
Elongation at break (%)
Flexural modulus (MPa)
Coating on to aluminium
Coating and lamination with
plastic fi lmsCoextrusion
Heat adhesive fi lm and powder
Modifi cation of thermoplastic polymers
Hot melt adhesives
Compounds/ Additives/
Coupling agent
GMAAX8840 - 0 8 5 106 87 8 400 85 Alloys, toners AX8900 MA 24 8 6 65 <40 4 1100 <30 PET, PBT, alloys
MAH high content
3210 BA 6 3.1 5 107 76 12 600 120 PA4210 BA 6.5 3.6 9 105 69 10 650 120
LX4110 EA 5 3 5 105 78 11 650 1406200 EA 6.5 2.8 40 102 66 6 600 958200 EA 6.5 2.8 200 100 57 6 400 40
TX8030 EA 13 2.8 3 95 65 12 700 130HX8290 EA 17 2.8 70 85 <40 6 700 30
3410 BA 17 3.1 5 89 47 8 700 24 PA3430 MA 15 3.1 6 84 45 12 750 26 PA5500 EA 20 2.8 20 80 45 10 700 20
MAH low content
4503 MA 20 0.3 8 80 45 9 750 204700 EA 29 1.3 7 65 <40 5 800 <30 PA4720 EA 29 0.3 7 65 <40 5 800 <30 PA
Test methodFTIR FTIR ASTM D1238 DSC ASTM D1525 ASTM D638 ASTM D638 ASTM D790
Internal method internal method ISO 1133 ISO 11357-3 ISO 306 ISO 527-2 ISO 527-2 ISO 178
Type Grades Base polymer
Properties (typical values) Main applications
Adhesion to/ Affi nity withMelt index (g/10 min)
(190°C–2.16 kg)
Melting point (°C)
Vicat softening temp. (°C)
Blow moulding Coex tube Pipe coating Cable HFFR Blow fi lm Cast fi lm SheetExtrusion Coating
Compounds (coupling agent / impact modifi er )
PE/EVA grades
18211 EVA 3.5 75 51 PE, PA, EVOH, PS, PET18300 LLDPE 2.3 120 85 PE, PA, EVOH, antifog
18302N LLDPE 1.5 123 84 PE, EVOH, PA (cast)18334 LLDPE 1 125 101 PE, PA, EVOH18340 LLDPE 3 118 99 coupling agent
18342N / 18410* HDPE 3.5 125 110 3LPE coating PE, Epoxy primer18360 LLDPE 2 120 87 PE, PA, EVOH, PEX, PERT18507 HDPE 5 128 - coupling agent HDPE / mineral fi llers / natural fi bers18910 LLDPE 1.5 117 77 PE, PS, EVOH, PAIM300 LLDPE 1.2 112 31 impact modifi er PAOE825 LLDPE 3 118 99 coupling agent PE, PA, EVOH
PP grades
18722 Random PP 7*** 143 120 PP, PA, EVOH18725 Random PP 13*** 124 - PP, PA, Epoxy, Metals18729 Homo PP 4.5*** 162 137 PP, PA, EVOH
18732* Copo PP 8*** 134 120 PP, PA, EVOH, Alu, Epoxy18750 Homo PP 35*** 160 121 PP, PA, EVOH, Alu18751 Homo PP 35*** 160 138 PP, PA, EVOH, Alu
CA100 Homo PP 10** 167 147 coupling agentPP / mineral fi llers (including HFFR) / glass fi ber,
bubbles and beds
Test methodASTM D1238 DSC ASTM D1525
ISO 1133 ISO 11357-3 ISO 306
Ethylene - Acrylate reactive terpolymers
Grafted polyolefi ns
* Available in powder ** Melt index (190°C–325g) *** Melt index (230°C–2.16 kg)
GMA: epoxide reactive group; MAH: maleic anhydride
A global chemical company and France’s leading chemicals producer, Arkema is building the future of the chemical industry every day. Deploying a responsible, innovation-based approach, we produce state-of-the-art specialty chemicals that provide customers with practical solutions to such challenges as climate change, access to drinking water, the future of energy, fossil fuel preservation and the need for lighter materials. With operations in more than 40 countries, some 14,000 employees and 10 research centers, Arkema generates annual revenue of €6.1 billion, and holds leadership positions in all its markets with a portfolio of internationally recognized brands.
Evasin®
ARK
EMA
- 42
0 ru
e d’
Estie
nne
d’O
rves
927
05 C
olom
bes
Ced
ex -
Fran
ce -
A F
renc
h so
ciét
é an
onym
e w
ith a
a s
hare
cap
ital o
f 27
0 03
5 92
3 eu
ros
Regi
ster
ed in
the
Nan
terr
e (F
ranc
e) T
rade
and
Com
pani
es R
egist
er u
nder
the
num
ber 4
45 0
74 6
85
4369
E/08
.201
4/20
- PO
F - P
hoto
s A
rkem
a, T
hink
stock
, Fot
olia
- C
once
ptio
n/Ré
alisa
tion
: Ryt
hmic
01
47 4
9 56
60
GradesEthylene content (% mol)
Melt index (g/10min) Melting point
(°C)Crystalization
point (°C)Glass transition
point (°C)
O2 Transmission Rate (65% RH)
(20°C)Main applications
190°C - 2.16kg 210°C - 2.16kg
2951-F 29 3 187 162 60 0.3 Bottles, pipes
3251-F 32 1.6 3.5 183 159 59 0.38 Bottles, sheets, fi lms
3851-F 38 1.6 3.7 173 151 54 0.71Sheets, thermoforming,
fi lms
4405-F 44 5.5 166 146 56 1.35Sheets, thermoforming,
shrinks, fi lms
4451-F 44 1.8 167 146 56 1.35Sheets, thermoforming,
shrinks, fi lms
Test methodASTM D1238
ISO 1133DSC
ISO 11357DSC
ISO 11357DMA
ISO 11357ASTM D3985 ISO 14663-2
Let’s progress together
specialty polyolefins
Let’s progress together
SPECIALTY REACTIVE POLYOLEFINS /
Lotader® / Orevac® / Evasin®Ethylene - Vinyl alcohol copolymers
The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, the data showed in the tables of this leafl et are typical values and cannot be considered as specifi cations. Arkema expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specifi c product designated and may not be,applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained,herein constitutes a license to practice under any patent and it should not be construed as an inducement to infringe any patent and the user is advised to take appropriate steps to be sure that,any proposed use of the product will not result in patent infringement.
See MSDS for Health & Safety Considerations. The information contained in this document is based on trials carried out by our Research Centres and data selected from the literature, but shall in no event be held to constitute or imply any warranty, undertaking, express or implied commitment from our part. Our formal specifi cations defi ne the limit of our commitment. No liability whatsoever can be accepted by Arkema with regard to the handling, processing or use of the product or products concerned which must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.
Arkema has implemented an internal policy regarding the use of its products in medical devices applications that are in contact with the body or circulating bodily fl uids. In addition, except for limited cases as determined by the Medical Device Policy, Arkema strictly prohibits the use of any Arkema products in Medical Device applications that are implanted in the body or in contact with bodily fl uids or tissues for greater than 30 days.Arkema Functional Polyolefi ns are not designed neither produced in conditions suitable for medical device applications. Please contact Arkema sales representatives if you would like to use Arkema Functional Polyolefi ns in medical device applications.
Headquater: Arkema France 420, Rue d’Estienne d’Orves - 92700 Colombes - France
Tel.: 33 (0)1 49 00 80 80 - Fax: 33 (0)1 49 00 83 96arkema.com
lotader.comorevac.com
EUROPEHeadquater Arkema France420, rue d’Estienne d’Orves92700 COLOMBESFRANCETel.: (+33) 1 49 00 80 80Fax: (+33) 1 49 00 83 96
NORTH AMERICAArkema Inc.900 First Avenue - P.O. Box 6153619406-0936 KING OF PRUSSIA, PAUNITED STATES Tel.: (+1) 610 878 6500 Fax: (+1) 610 878 6400
ASIAArkema PTE Ltd - Branch Offi ce19th Floor, ITF Tower140/40 Silom Road,Suriyawonge Bangrak10500 BANGKOKTHAILAND Tel.: (+66) 2 237 62 57 Fax: (+66) 2 237 5797
SOUTH AMERICAArkema Quimica LtdAv. Ibarapuera 20334th fl or - Moema04029 - 901 SÃO PAULOBRAZIL Tel.: (+55) 11 21 48 85 22