Specialising in Airframe, Tailboom and Composite Structures...• OmegaPS – ILS, LSAR • Analyzer...
Transcript of Specialising in Airframe, Tailboom and Composite Structures...• OmegaPS – ILS, LSAR • Analyzer...
Specialising in Airframe, Tailboom and Composite Structures
Australian Aerospace Engineering is a Maintenance, Repair and Overhaul (MRO) facility servicing Defence and industry.
• CASA Approved Kiowa 206B-1 helicopter fixture
• Dedicated MRO company with extensive tooling
• Deep Level Maintenance on medium and light platforms
• Aerospace and Mil-Spec hardware distributor
• OEM trained LAME’s with Engineering degrees
• Experienced test pilots (>10,000 hrs)
CAPABILITIES
DISCRIMINATORS
Australian Aerospace Engineering Pty Ltd2017ABN: 90114643999
CERTIFICATIONS AND ACCREDITATIONS• CASA Part 145 Maintenance Organisation
• CASA Part 21G Production Certificate
• CASA CAR30 Certificate of Approval Holder
• Defence Recognised Supplier
• ITAR import experience
• Pending Certification (Stage 2 Audit Complete):
- AS9100 / AS9110 / AS9120 / ISO9001 : 2015
KEY CUSTOMERS AND PARTNERS
AAE supplies aeronautical products and MRO services to aircraft operators and maintainers throughout Australia.
• BAE Systems Australia • Pennant Australasia
• Milspec Manufacturing • Regional Express
© 2016 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.
Our Vision
To radically change the way organisations design products and make decisions
Largest privately held CAE and HPC software developer in the world
Over 30 years’ industry experience
CAD & solver neutral pre & post
chosen by Airbus as global solution
Right-first-time with industry leading multi-disciplinary optimisation tools
Comprehensive multi-physics suite allows simulation of real-world scenarios
5000+ CUSTOMERSCAPABILITIES
The most Comprehensive Engineering Simulation package on the Market
Largest Simulation-focused Consultancy in the World
Alex Quirk
m +61 449 877 808 @ [email protected]
Suite 208 | 434 St Kilda RoadMelbourne | Victoria | 3004
w www.altairengineering.com.au
COMPETITIVE DISCRIMINATORS
June 2012
BEAK ENGINEERING
Phillip Shirley : +61 (0) 410 762 830 : [email protected]
COMPANY / CAPABILITY OVERVIEW •GROUND POWER UNITS - Beak is proud to be the ONLY OEM of 100% Australian designed and built aviation ground power equipment. Our GPU’s are the only units in the world’s harshest environments - Antarctica to the Middle East. Our MILSTD units have been used extensively by the ADF and NZDF for the last 15 years. The 32 pole alternator operating at 1500RPM greatly reduces cost of ownership. 45-180kVA & 28.5VDC •CABLE HANDLING SYSTEMS– The Beak Power Skate cable handler is used throughout Melbourne, Perth and Sydney Airports for 400Hz and 28.5VDC ground power cables. Cable life is greatly extended and ground ops enhanced and safer. •400Hz CABLES and PLUGS •AIRCRAFT JACKS, STANDS, TOWBARS •HYDRAULIC & NITROGEN RIGS •BEAK PROVIDES IN COUNTRY SUPPORT FOR JSF NITROGEN EQUIPMENT
CAPABILITY •Turn-key Sustainment Solutions •Concept Development •Project Management •MR&O (On/Off Site) •Marine Aviation Certification •Test, Certification & Calibration •Supply & TLS •TPL Inventory Management •Training
CERTIFICATIONS / ACCREDITATIONS • ISO 9001:2015 • Recognised Supplier (DRSS) to the Australian Department of Defence.
• AIRBUS Approved Supplier.
• BEAK’s quality systems were awarded a ‘very high confidence’ rating – Royal Australian Navy Maritime Systems Division competency evaluation.
BEAK ENGINEERING’s technicians are the most competent and experienced personnel in 400Hz ground power in Australia and their responsiveness and versatility ensures that technical support and maintenance can be undertaken in-house, remotely or in situ anywhere in the world at short notice. Beak provides complete Through Life Support for all APM, Dytecna and Beak GPU’s.
PARTNERS & CUSTOMERS •NZDF •CASG •Royal Australian Navy •RAAF •Thales, UGL, NSM, BAE, WAMA •QANTAS •Virgin Australia •AFP •VICPOL •NSW Police •QPOL •WAPOL •USN
7 Walker St Braeside 3195 Victoria
www.beak.net.au
•WR Davis Engineering •Australian Army •Boeing •AIRBUS •CHC Helicopters •Babcock Offshore Services •Jetstar Airways •Alliance Airlines •MELAIR, SACL •NZDF •HydroWorks •INDAL Technologies
Aviation Ground Service Equipment
Date 21/02/2016 Design and Construct Engineering DRYSYS ALAN HODGE
PRODUCT
KEY CUSTOMERS
Boeing Aerostructures Australia, Thales Australia, Asia Pacific Aerospace, Chemring, Barker Trailers Bombardier Transportation, DAF Trucks, Fanuc Robotics, Ford Motor Company, General Motors Holden, Global Green
International (GGI), Kenworth Trucks / Paccar, Mack Trucks, Toyota Manufacturing Corporation, Unity Water, Vawdrey Visy, Volvo Trucks.
KEY PARTNERS
• Schneider
• ABB • Omron
• Allen Bradley
• Siemens • Calibre Consulting
• WNV Systems (UK) • IFM
• SMC
• SEW
Plus many more
CAPABILITIES
• We a single source design and construct engineering company, delivering fully engineered solutions that solve
problems.
• Proven ability to design, construct and integrate sophisticated facilities and live, shutdown or hazardous
environments. • Provide full turnkey paint shops or a range of industrial paint finishing facilities, for all paint coating.
• Design and construct complex fluid & piping systems, including instrumentation and software.
• Provides innovative turnkey contamination control systems
• Provides a range of electrical design, control, automation and installation services.
DISCRIMINATORS
• DRYSYS is a diverse design and construct engineering company.
• Specialise in the turnkey delivery of multi-disciplined engineering projects with high local content and full support.
• Provide a unique one-stop, single source, fixed price delivery strategy, taking full responsibility.
• Projects completed on time and on budget, every time.
• Proven track record track record in solving manufacturing and process problems
• All our solutions are purposely designed, built and installed utilising a delivery model that provides our clients
• Our manufacturing and process expertise and leading technology result in some of the most cost effective and robust
results.
QUALITY STANDARDS AND OTHER ACCREDITATIONS
• Supplier Continuous Improvement Program
• Defence Recognised Supplier
• Full Traceability and Quality Assurance to meet project requirements
• ISO 9001 Sub-Contractors or as required to meet project requirements
CONTACT/ADDRESS DETAILS
Alan Hodge National Business development Manager
DRYSYS
Engineered Solutions Level 3, 369 Royal Parade, Parkville. Victoria. 3052
m: 0447 162 322 | p: 03 9005 5509
e: [email protected] | http://drysys.com.au
Logistics &Training Solutions Capabilities
Pennant specialises in innovative Logistics and Training solutions to maximise through life support of complex assets.
• Engineered Training Solutions • Training Support Services • Virtual Reality • Emulation & Simulation • Generic Trainers • Logistics Software
Services • Full design,
development services for all your needs
Key Customers
• Australian Defence Organisation • BAE Systems Australia • Boeing Defence Australia
Key Partners
• Pennant International Group • BAE Systems Australia • MBDA Australia • Every customer is a partner!
Products & Services Logistics Software Services
• OmegaPS – ILS, LSAR • Analyzer – LCC, LORA, Sparing
Training Solutions
• GenSkills – Hand Skills • GenFly – Flight Controls • BFCRT – Flight Control rigging • HSPT - Hydraulic Systems • IAMT – Avionics Maintenance • SEPT - Aircraft Marshalling Trainer • VRPT – Parachute Trainer
Discriminators
• 25 years of Australian Defence experience • Full Design, development, and implementation services • Global presence
Quality Approvals & Awards
• Letter of Recognised Supply • Defence Recognised Supplier • Government Endorsed Supplier • UK
Contact Details
David Stephan (General Manager) Suite 6/334 Highbury Road Mount Waverley Vic, 3149 Australia Ph: +61 (3) 9886 7977 Fx; +61 (3) 9886 7955 www.pennantaust.com.au [email protected]