SPECIALISED STUD SYSTEMS PTY LTDTM 2015 PRODUCT CATALOGUE 1300 88 FAST SPECIALISED STUD SYSTEMS PTY...

TM

2015 PRODUCT CATALOGUE

1300 88 FASTSPECIALISED STUD SYSTEMS PTY LTD

www.faststud.com.au POST PO Box 5291, Greystanes NSW 2145

PHONE 1300 88 3278 (1300 88 FAST) FAX (02) 9609 7813EMAIL [email protected]

Pricing Effective 1st October 2015 VERSION 2.1

QUALITY | SPEED | EXPERIENCE

TM

FASTSTUD IS A PROUD DISTRIBUTOR OF THE FOLLOWING PRODUCTS:

Specialised Stud Systems Pty Ltd (T/A as Faststud) was established in 1996 to supply the construction industry with quality roll formed steel building

products and has gained a wealth of experience as a specialist in this field.

The organisation revolves around customer needs, and Faststud is dedicated to offering quality products with fast, reliable and personalised

service, backed up by technical and engineering expertise.

We are committed to fulfilling the most challenging of customer requirements and we are constantly seeking to introduce and implement

innovative, viable systems for the construction industry.

PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. E&OE

© 2015 Specialised Stud Systems Pty Ltd.Copyright laws cover the contents of this product catalogue. Reproduction of all or part without the written permission from Specialised Stud Systems is prohibited. Whilst every care has been taken in the collation of this document, Specialised Stud Systems Pty Ltd accepts no liability for the accuracy of the information supplied. Specialised Stud Systems Pty Ltd. expressly disclaims all and any liability to any person whether a purchaser of any product details of which are set out in this catalogue, or otherwise in respect of anything done or omitted to be done and the consequences of anything done or omitted to be done, by any such person in reliance, whether in virtue in whole or in part upon the whole or part of the within information.

42 - MDF Non Rated & Sound Rated

43 - METAL - Non Rated & Sound Rated

43 - Fire Rated

43 - Tile and Spa Panels

43 - Aluminium Manhole Frames

05 - Stud & Track 0.50 - 0.55 BMT

06- Stud & Track 0.75 BMT

07 - Stud & Track 1.15 BMT

07 - Stud & Track 1.50 BMT

08 - HEDA Jamb Studs

09 - Slotted Deflection Track, Noggings, Nogging Tracks, Shaftwall System

10 - Nogging Bracket, Curved Track, Flexible Track for Curved Walls & Bulkheads

11 - Stud Wall Accessories: Brackets, Brace Strapping & Staggered Stud Clips

12 - Stud Wall Accessories: Gal Mesh, Backing Strips & Tools, Structural

13 - Concealed Ceiling Systems

16- SlimceilTM - Low Clearence Ceiling Systems

17 - Exposed Grid Ceiling System

18 - Ceiling Tiles

31 - Plasterboard Metal Accessories -External and Internal Angles, Shadowline Angles

32 - Arch Beads, Stopping Beads, Expansion Joints,Backing Angles

33 - PVC Finishing Section

34 - EZY Finishing Sections: EZY CapTM, EZY RevealTM, Fastcap® and Cavkit®

36 - EZY Jamb®

39 - Skirting and Flat Bar

40 - Aluminium Partition Section

19 - Resilmounts, Acoustic Brackets, Wave Bar - Flexible Noise Barrier

64 - Safety Data Sheets

65 - Terms and Conditions of Sale

55 - Metal Sections for Hebel Systems, Hebel Fasteners

56 - Thermal Wall & Ceiling Batts, Anticon Roofing Blanket

57 - Partition Batts, Soundscreen Plus (Rockwool), Fireseal Partywall Batts

62 - Aircell

63 - Sarking

48 - Collapsible Scaffold and Miscellaneous Tools

49 - Framing Screws, Plasterboard Screws - Loose & Collated

50 - Fibre Cement Screws - Loose & Collated, Roofing Screws, Extended Drill

Point Screws (Series 500)

51 - Ceiling Suspension Anchors, Booker Rod, Bolts, Nuts and Washers,

Staples, Masonry Bolts

52 - Metal Pin Anchors, Nail in Plugs & Wall Plugs, Rivets, Drill Bits

53 - Phillips & Hex Bits, Cut Off & Grinding Wheels

54 - Ramset TrakfastTM and TrackmasterTM

20 - Top Hat Ceiling and Roof Battens

21 - Top Hat Purlins

22 - Top Hat Junction Studs

23 - Accessories

24 - C and Z Purlins 58 - Thermal Wall & Ceiling Batts, Acoustic / Thermal Batts, Sound Blanket,

Ceiling Baffle

03- Quality Assurance / Warranty

04 - Marketing and Pricing Policy

44 - MDF Stop Ends, Tapes, Plasterboard, Plasterboard Compounds

45 - Sealants and Adhesives

46 - Abrasives, Hand Tools

47 - Safety Gear

CONTENTS

STEEL STUD WALL SYSTEMS 05

CEILING SYSTEMS 13

TOP HATS & PURLINS 20

FIBRE CEMENT 25

PLASTERBOARD 29

PLASTERBOARD FINISHING SECTIONS 31

METAL DOOR FRAMES 36

ALUMINIUM SECTIONS 39

ACCESS PANELS 42

SOUND ISOLATION SYSTEMS 19

PLASTERING ACCESSORIES & TOOLS 44

LADDERS & PLATFORMS 48

FASTENERS 49

HEBEL ACCESSORIES 55

GLASSWOOL INSULATION 56

POLYESTER INSULATION 58

EARTHWOOL INSULATION 59

POLASTIC INSULATION 60

INSULATION FIXINGS 61

REFLECTIVE INSULATION 62

APPENDIX 64

INTRODUCTION 01

Page 2 All Prices Exclude GST.E&OE

Pricing Effective 1st October 2015 (V2.1)

Pricing Effective 1st October 2015 Page 3 Version: 2.1

Quality Assurance / Warranty

WARRANTY

Refer to Terms and Conditions of sale at the back of this catalogue.

Note that mixing of different manufacturers’ products within a ceiling or wall system will void any warranty.

QUALITY ASSURANCE

Faststud is the major NSW Distributor for Studco Building Systems.

As such the majority of steel products listed are supplied by Studco.

Studco is a Quality Assured Company.

Pricing Effective 1st October 2015 Page 4 Version: 2.1

Marketing & Pricing Policy

FREIGHT

Freight charges available on application.

BACK ORDERS

Sydney Metropolitan area

No delivery charge on backorders for standard stock items. Standard delivery charge will apply to non standard products and special orders.

Outside Sydney Metropolitan area

Delivery charges will apply on backorders for both standard and non standard products. Order early to avoid these charges.

RE-DELIVERIES

If goods have to be returned to store for re-delivery due to the customer not meeting delivery related obligations made at the time of order, the customer will be charged for:

the cartage of the original delivery,

the cartage for return to store

and the later re-delivery.

SPECIAL ORDERS

Special size products e.g. Studs, Furring Channels, etc. are available from FASTSTUD provided that the minimum quantity is a stock pack size for the product concerned.

A purchase order is required before manufacture will commence.

All special orders will be billed within 30 days of date ready for despatch. Storage fees may apply if goods are not picked up or delivered within the 30 day period.

Special orders will be billed if the order is cancelled. Restocking is not an option.

PACKAGING

With few exceptions, FASTSTUD products are packed in workable quantities of stock packs and sub packs.

In such cases, minimum quantities sold are limited to sub packs.

GOODS & SERVICES TAX

FASTSTUD is registered for GST. All prices in this book exclude GST.

TIMEFRAME AND CONDITION ON RETURNS

A handling, restocking and administration charge will apply to all returned items.

If goods are picked up by Faststud, return freight will be charged.

If returned items require cleaning when they reach the yard an additional charge will apply.

Part LENGTH STOCK SUB PRICE Approx Approx

No. (mm) PACK PACK EACH $ l/m kg/piece

51SS24 * Stud 51mm 2400 100 10 10.16 4.23 1.300

51SS27 * 2700 100 10 11.47 4.25 1.460

51SS30 3000 100 10 12.71 4.24 1.630

51SS36 3600 100 10 15.27 4.24 1.950

64SS24 Stud 64mm 2400 100 10 8.85 3.69 1.430

64SS27 2700 100 10 9.96 3.69 1.610

64SS30 3000 100 10 11.06 3.69 1.790

64SS33 * 3300 100 10 12.17 3.69 1.970

64SS36 3600 100 10 13.28 3.69 2.150

64SS42 4200 100 10 15.49 3.69 2.500



76SS24 Stud 76mm 2400 100 10 11.28 4.70 1.710

76SS27 2700 100 10 12.69 4.70 1.950

76SS30 3000 100 10 14.09 4.70 2.170

76SS33 * 3300 100 10 15.50 4.70 2.350

76SS36 3600 100 10 16.91 4.70 2.610

76SS42 4200 100 10 19.73 4.70 3.040

76SS48 4800 100 10 22.55 4.70 3.410

76SS60 * 6000 100 10 28.18 4.70 4.270

92SS24 Stud 92mm 2400 100 10 12.98 5.41 1.910

92SS27 2700 100 10 14.60 5.41 2.150

92SS30 3000 100 10 16.22 5.41 2.390

92SS33 * 3300 100 10 17.85 5.41 2.630

92SS36 3600 100 10 19.47 5.41 2.870

92SS42 4200 100 10 22.71 5.41 3.350

92SS48 4800 100 10 25.96 5.41 3.830

92SS60 6000 100 10 32.44 5.41 4.780



51ST30 Track 51mm x 32mm with safety hem 3000 100 10 10.95 3.65 1.440






64SDHT30 DHT 64mm x 50mm with safety hem 3000 100 10 17.89 5.96 2.310



STEEL STUD WALL SYSTEMSWALL STUD 0.50 BMT

WALL STUD 0.55 BMT

TOP & BOTTOM TRACK 0.50 BMT

DEFLECTION HEAD TRACK 0.50 BMT

Wall Track Deflection Track Wall Stud

* Denotes lead times and minimum order quantity may apply Page 5 All Prices Exclude GST.E&OE




51HS27 * Stud 51mm Load Bearing 2700 100 10 16.06 5.95 2.110

51HS30 * 3000 100 10 17.82 5.94 2.340


64HS27 * 2700 100 10 18.18 6.73 2.410

64HS30 3000 100 10 20.20 6.73 2.670

64HS36 3600 100 10 24.24 6.73 3.210

64HS42 * 4200 100 10 28.28 6.73 3.740

64HS48 4800 100 10 32.32 6.73 4.280

64HS60 * 6000 100 10 40.40 6.73 5.350

76HS24 Stud 76mm Load Bearing 2400 100 10 17.49 7.29 2.330

76HS27 2700 100 10 19.68 7.29 2.610

76HS30 3000 100 10 21.86 7.29 2.900

76HS36 3600 100 10 26.24 7.29 3.480

76HS42 * 4200 100 10 30.61 7.29 4.050

76HS48 4800 100 10 34.98 7.29 4.630

76HS60 6000 100 10 43.72 7.29 5.800


92HS27 2700 100 10 21.57 7.99 2.870

92HS30 3000 100 10 23.96 7.99 3.190

92HS36 3600 100 10 28.76 7.99 3.830

92HS42 4200 100 10 33.55 7.99 4.470

92HS48 4800 100 10 38.34 7.99 5.110

92HS60 6000 100 10 47.92 7.99 6.390


150HS42 * 4200 100 10 57.44 13.68 5.810

150HS48 4800 100 10 65.64 13.68 6.640

150HS60 6000 100 10 82.05 13.68 8.290

150HS72 7200 100 10 98.46 13.68 9.950



51HT30 * Track 51mm x 32mm with safety hem 3000 100 10 16.47 5.49 2.110

64HT30 Track 64mm x 28mm with safety hem 3000 100 10 18.72 6.24 2.340

76HT30 * Track 76mm x 28mm with safety hem 3000 100 10 19.80 6.60 2.570

92HT30 Track 92mm x 28mm with safety hem 3000 100 10 22.13 7.38 2.860

150HT30 Track 150mm x 32mm with safety hem - 0.75BMT 3000 100 10 33.29 11.10 3.990



51HDHT30 * DHT 51mm x 50mm with safety hem 3000 100 10 18.47 6.16 2.800

64HDHT30 DHT 64mm x 48mm with safety hem 3000 100 10 21.27 7.09 3.020



150HDHT30 DHT 150mm x 50mm with safety hem - 0.75BMT 3000 100 10 36.57 12.19 4.640

WALL STUD 0.75 BMT

TOP & BOTTOM TRACK 0.70/0.75 BMT

DEFLECTION HEAD TRACK 0.70/0.75 BMT

Wall Track Deflection Track Wall Stud





64XHS27 * Stud 64mm Load Bearing 2700 100 10 23.44 8.68 3.390

64XHS30 3000 100 10 26.05 8.68 3.790

64XHS36 3600 100 10 31.25 8.68 4.520

64XHS42 4200 100 10 36.46 8.68 5.280

64XHS48 * 4800 100 10 41.67 8.68 6.030

64XHS60 6000 100 10 52.09 8.68 7.580


76XHS27 2700 100 10 25.24 9.35 3.710

76XHS30 3000 100 10 28.05 9.35 4.130

76XHS36 3600 100 10 33.65 9.35 4.950

76XHS42 * 4200 100 10 39.26 9.35 5.780

76XHS48 4800 100 10 44.87 9.35 6.600

76XHS60 6000 100 10 56.09 9.35 8.250

92XHS27 Stud 92mm Load Bearing 2700 100 10 27.79 10.29 4.110

92XHS30 3000 100 10 30.87 10.29 4.570

92XHS36 3600 100 10 37.05 10.29 5.480

92XHS42 4200 100 10 43.22 10.29 6.400

92XHS48 4800 100 10 49.40 10.29 7.310

92XHS60 6000 100 10 61.74 10.29 9.140

92XHS72 7200 100 10 74.09 10.29 10.970


150XHS42 4200 100 10 87.46 20.82 8.670

150XHS48 4800 100 10 99.95 20.82 9.910

150XHS60 6000 100 10 124.94 20.82 12.380

150XHS72 7200 100 10 149.93 20.82 14.860



64XHT30 * Track 64mm x 32mm 3000 100 10 22.12 7.37 7.373

76XHT30 Track 76mm x 32mm 3000 100 10 24.26 8.09 8.087

92XHT30 Track 92mm x 32mm 3000 100 10 27.04 9.01 9.013

150XHT30 Track 150mm x 32mm 3000 100 10 60.14 20.05 20.047



64XHDHT30 DHT 64mm x 50mm 3000 100 10 38.49 12.83 4.570

76XHDHT30 DHT 76mm x 50mm 3000 100 10 41.25 13.75 4.980

92XHDHT30 DHT 92mm x 50mm 3000 100 10 44.78 14.93 5.370

150XHDHT30 DHT 150mm x 50mm 3000 100 10 62.99 21.00 6.990



64HDHT30S * Slotted DHT 64mm x 0.75 3000 100 10 P.O.A. - -



76XHDHT30S * Slotted DHT 76mm x 1.15 3000 100 10 P.O.A. - -

92XHDHT30S Slotted DHT 92mm x 1.15 3000 100 10 P.O.A. - -

150XHDHT30S * Slotted DHT 150mm x 1.15 3000 100 10 P.O.A. - -



92XXHT30 * HEAVY DUTY TRACK 92mm x 1.50 BMT 3000 100 10 P.O.A - 5.700

92XXHS72 * HEAVY DUTY STUD 92mm x 1.50 BMT 3000 100 10 P.O.A - 15.260

DEFLECTION HEAD TRACK 1.15 BMT

STEEL STUD WALL SYSTEM 1.50 BMT

SLOTTED DEFLECTION HEAD TRACK

WALL STUD 1.15 BMT

TOP & BOTTOM TRACK 1.15 BMT

Wall Track Deflection Track Wall Stud Slotted Deflection Track





HJ9263150-285 HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 2850 2850 50 1 P.O.A - 6.860

HJ9263150-30 * HEDAJAMB63 92mm x 63mm x 16 x 1.50 BMT x 3000 3000 50 1 P.O.A - 7.220












M104 Slotted HEDA Connection bracket (2mm BMT) 100 1 8.84 - 0.190

HEDA Jamb 90

Accessories

HEDA Jamb 63

HEDA Jamb63 HEDA Jamb90

TIME SAVING *No need for boxed studs at internal opening or doorways. *No need for boxed or back-to-back studs in wall designs. No need for complex lintel

arrangements. COST SAVING *Replace some structural sections with HEDA Jamb. *Fewer Noggins required in HEDA Jamb walls. *Achieve huge spans not possible with conventional studs.





64HN45 Single Nogging 64mm @ 450 centres 450 10 10 5.03 - 0.350










64NT45 Nogging Track 64mm @ 450 centres x 3.6 3600 100 10 30.39 8.44 2.860










SWC64-530 * 64mm CH STUD 0.55BMT x 3.0m 3000 50 50 P.O.A - 2.758



SWE64-530 * 64mm E STUD 0.55BMT x 3.0m 3000 100 100 P.O.A - 1.995


SWTJ64-30 * 64mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A - 2.882

SWTD64-30 * 64mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A - 3.692






SWTJ102-30 * 102mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A - 3.632

SWTD102-30 * 102mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A - 4.442

SINGLE NOGGINGS 0.70/0.75 BMT

NOGGING TRACK 0.70/0.75 BMT

SHAFTWALL SYSTEM

Nogging Track Nogging E-STUD

C-H-STUD





M68 * Nogging Bracket 36mm x 70mm long-INTERMEDIATE 70 50 1 P.O.A - 0.078

M69 * Nogging Bracket 36mm x 70mm long-END 70 50 1 P.O.A - 0.042

M78 * Nogging Bracket 18mm x 150mm long-INTERMEDIATE 150 50 1 P.O.A - 0.132

M79 * Nogging Bracket 18mm x150mm long-END 150 50 1 P.O.A - 0.070



CURVED TRACK-0.55 BMT

CT51S * 51mm x 32mm x 0.55BMT 3000 - 1 P.O.A - 1.440




Curved Track & Curved Deflection Head Track are available in all sizes and material gauges.



FLEXIBLE TRACK FOR CURVED WALLS & BULKHEADS (with side reinforcement)

FL-51-30 * 51mm x 42 x 0.55 BMT Flexible Track (No Side Reinforcement) 3000 50 1 P.O.A - 2.050

FLEXC64 * 64mm x 45 x 0.55 BMT Flexible Track 3000 50 1 P.O.A - 2.070



FL-150-24 * 150mm x 42 x 0.75 BMT Flexible Track (no side reinforcement) 2400 50 1 P.O.A - 2.536

NOGGING BRACKETS

CURVED TRACK

FLEXIBLE TRACK

M78

Flexible Track Curved Track

18mm

M79 M68 M69

M78 & M79 nogging brackets are designed to suit 18mm plywood.

M68 & M69 nogging brackets are designed to suit standard 35mm timber stud noggings.

Studco Nogging Bracket System makes installing timber noggings - of virtually any shape or size - into a steel stud wall a breeze. The bracket system is supplied ready to install, with pre-punched holes and cut to length, saving considerable time on site.

36mm 18mm




No. m PACK PACK EACH $ l/m kg/piece

M100 Framing L Bracket 100 x 45 x 40 wide (1.5mm BMT) - 100 1 2.97 - 0.087

M104 Slotted HEDA Connection bracket (2mm BMT) - 100 1 8.84 - 0.190

M545 Universal Framing Bracket 75 x 75 x 55 wide (1.5mm BMT) - 100 1 3.17 - 0.090

BRFL75-3 * Framing L Bracket 75 x 75 x 3BMT - 100 1 10.63 - 0.250

SSH-M10-25 * Set Screw (BOLT) M10 x 25mm ZP Hex Head - for framing brackets - Box 150 37.18 - 0.000

W1024 * Washer 10 X 24 Zinc Plated - for framing brackets - Box 100 9.11 - 0.492

N-M10 * Nut M10 Zinc Plated - for framing brackets - Box 100 8.24 - 0.930

STRAP25830 Tension Brace Strapping Coil Z275 24mm x 0.8 x 30m 30m - 1 32.00 1.07 4.100

STRAP25850 * Tension Brace Strapping Coil Z275 24mm x 0.8 x 50m 50m - 1 53.00 1.06 7.100

STRAPT100 * Brace Strapping Tensioner Box of 100 - - 100 141.32 - 4.540

STRAPT6 Brace Strapping Tensioner Pack of 6 - - 6 12.24 - 0.000

RM126 * Staggered stud clip - 100 100 1.34 - 0.020

RM127 * Staggered stud clip - Box type for 64mm stud in 92mm track - 50 50 2.93 - 0.070

ACCESSORIES FOR STUD WALLS

M104 M100 M545

STRAP25830 RM126 RM127 STRAPT

SSH-M10-25

N-M10

W1024

Call Faststud today to arrange a copy of the STUDCO

"Wall & Ceiling Design & Installation Manual".

Full of handy tips and ideas to get the job done properly. From span tables to acoustic design guides.

We've got you covered.



Part SUB PRICE Approx Approx

No. PACK EACH $ l/m kg/piece

PATLSCI * Stud Crimper-short handle 1 P.O.A - 0.590

PATLSP * Stud Punch - Punches a 34mm service hole in studs. 1 P.O.A - 2.784

PATLSPG1 * Stud Punch Insert- Easy Snap in Grommet-Pack 100 (working hole diameter 30mm) 100 P.O.A - 0.816

PATLTSG * Aviation Tin Snips - Right Cut - GREEN 1 P.O.A - 0.432

PATLTSR * Aviation Tin Snips - Left Cut - RED 1 P.O.A - 0.432

PATLTSY Aviation Tin Snips - Straigh Cut - YELLOW 1 P.O.A - 0.432

Part STOCK SUB PRICE Length Approx

No. PACK PACK EACH mm kg/piece

BSCB050-30 Black Colorbond Backing Strip 50mm 5 5 P.O.A 3000 6.040

BSCB100-30 Black Colorbond Backing Strip 100mm 5 5 P.O.A 3000 12.080



GS1224-055 Galvabond Sheet 1220 x 2440 0.55 BMT 1 P.O.A - 13.700

GS1224-080 * Galvabond Sheet 1220 x 2440 0.80 BMT 1 P.O.A - 19.610

GS1224-110 * Galvabond Sheet 1220 x 2440 1.10 BMT 1 P.O.A - 27.030

EM5020F * Expanded Mesh Flattened 1200 x 2400 x 2mm (opening size 87 x 43) - Black 1 P.O.A - 7.200

EM5020FG * Expanded Mesh Flattened 1200 x 2400 x 2mm (opening size 87 x 43) - Galvanised 1 P.O.A - 7.200



M110 StrongArm Wall Brace - 1200mm x 300mm 1 P.O.A - 10.200

Posts * Steel Posts (SHS, RHS, Galvanised, Black, Powder Coated, Painted,etc..) 1 P.O.A - -

Lintels & Sills * Structural Lintels & Sills 1 P.O.A - -

Angles & Brackets * Various size angles and brackets (Custom Length, sizes and coatings 1 P.O.A - -

GAL & MESH SHEETS

ACCESSORIES FOR STUD WALLS

BACKING STRIPS

STRUCTURAL

MADE TO ORDER:

Galvabond Sheet

Gal Sheet & Expanded Mesh Sheets are ideal for security wall applications

Expanded Mesh

PATLSCI

PATLTSY PATLSP

PATLSPG1





M27-36 Top Cross Rail 25mm x 0.75BMT 3600 200 10 14.90 4.14 1.900



M27R-36 * Top Cross Rail 25mm x 0.75BMT - Curved to your specified radius 3600 1 1 48.93 13.59 1.900

M27R-48 * Top Cross Rail 25mm x 0.75BMT - Curved to your specified radius 4800 1 1 65.25 13.59 2.540




M308-24 Furring Channel 16mm 2400 240 8 7.32 3.05 0.950






M29-24 * Furring Channel 28mm 2400 240 8 8.98 3.74 1.220






M333-30 Recessed Furring Channel 13mm 3000 200 10 15.69 5.23 1.550

M333-60 Recessed Furring Channel 13mm 6000 200 10 31.34 5.22 3.110

M301-48 * 16mm Ceiling Batten 4800 420 18 11.73 2.44 1.330

M301-60 * 16mm Ceiling Batten 6000 420 12 14.67 2.45 1.660

MB005 Back Blocking Batten with 2.5mm Bend x 300mm 300 50 50 2.38 7.93 0.090

THB24-042-48 24mm Cyclonic Ceiling Batten 4800 200 10 14.21 2.96 1.800

THB24-042-61 24mm Cyclonic Ceiling Batten 6100 200 10 18.02 2.95 2.290

THB40-048-48 40mm Ceiling Batten 4800 150 1 28.95 6.03 3.260

THB40-048-75 * 40mm Ceiling Batten 7500 150 1 45.23 6.03 4.560



M40-30 M29 Furring Channel Wall Track 3000 250 10 10.69 3.56 0.980

M42-30 M308 Furring Channel Wall Track 3000 250 10 10.32 3.44 0.880

CONCEALED CEILING SYSTEMPRIMARY CHANNELS

FURRING CHANNELS & BATTENS

WALL TRACK

M28

M27 M29

M308 M42

M40

THB24

M333

M301

MB005

* Denotes lead times and minimum order quantity may apply Page 13All Prices Exclude GST.E&OE


Part STOCK SUB PRICE Approx Approx

No. PACK PACK EACH $ l/m kg/piece

M39 Locking Key 400 200 0.62 - 0.018

M534 Cross Rail Spring Hanger 250 250 1.85 - 0.020

M520 Sidemount Spring Hanger 200 200 1.85 - 0.020

M74 SR5 to timber joist 1000 100 0.61 - 0.018

M47 SR5 to concrete 1000 100 0.61 - 0.018

MBW * Bondek® Suspension Wedge 50 50 P.O.A - 0.030

MVF Purlin Clip in 100 Box 100 100 29.47 - 0.860

RAMTFE06 Ceiling Suspension Wedge Anchor 6mm x 55mm in 100 Box 100 100 16.03 - 1.140

RAMTFE06120 Ceiling Suspension Wedge Anchor 6mm x 120mm in 100 Box 100 100 41.14 - 2.530

BRDP * Drive Pin Suspension Angle Bracket 25mm x 30mm in 100 Box 100 100 31.73 - 1.402



M13 M301 Batten to timber/steel (short) - 400 100 0.66 - 0.021

M16 M301 Batten to timber/steel (long) - 400 100 0.73 - 0.041

M80 M301 Batten to conrete - 100 100 1.92 - 0.019

M26 M308-M29 Furring Channel to timber/steel (short) - 400 100 0.71 - 0.040

M94 M308-M29 Furring Channel to timber/steel (long) - 200 50 1.70 - 0.074

M96 * M308-M29 Furring Channel to timber/steel multidirectional - 100 100 5.56 - 1.210

M81 L Bracket for M17-M29 - 100 100 0.89 - 0.026

M237 M308-M29 Furring Channel to concrete - 400 200 1.00 - 0.028

M239 M308-M29 Furring Channel to concrete-threaded - 400 200 1.52 - 0.029

M239BA65 M308-M29 Anchor Clip with 65mm Bolt 65 100 50 3.67 - 0.050

M239BA85 M308-M29 Anchor Clip with 85mm Bolt 85 100 50 3.67 - 0.060

M239BA120 * M308-M29 Anchor Clip with 120mm Bolt 120 100 50 4.03 - 0.060



MBF Betafix Clip - 200 50 2.91 - 0.038

MBFS Betafix Clip with Longneck for use with Aircell Insulation - 200 50 3.16 - 0.038

M66 M25-M27-M28 Top Cross Rail to timber / steel - 250 100 1.79 - 0.030

M24 M27 - M28 Top Cross Rail to concrete - 250 100 2.11 - 0.030

M24N M27-M28 Top Cross Rail to Concrete Thread Adjustable - 250 100 2.93 - 0.030

M24NB65 * M27-M28 Thread Adj. With 65mm Bolt 65 100 50 3.67 - 0.040





SUSPENSION CLIPS

DIRECT FIX CLIPS

Drill size required

6mm

M39

M534

M520

M47

M74

MVF

TFE06

BRDP

MBW

M16

M81

M24NB

M66

M24N M24

M239BA M239 M237 M80

M13

M94

M26

M96

MBFS for use with Aircell Insulation

MBF

Drill size required

6mm





M38 M29 Furring Channel Joiner 400 100 0.79 - 0.049

M272 M27 Top Cross Rail Joiner 100 10 1.66 - 0.144

M254 SR5 Joiner 1000 100 1.09 - 0.010

M140 M301 Nail up batten Joiner 400 100 0.89 - 0.032



SOFT GALVANISED ROD FOR SUSPENDED CEILING SYSTEMS

SR5 5mm Galvanised Rod 3600 500 25 4.03 1.12 0.560

SR1T * 5mm Galvanised Rod with M6 Thread one end n/a 500 50 P.O.A - -

SR2T * 5mm Galvanised Rod with M6 Thread both ends n/a 500 50 P.O.A - -

SRH * 5mm Galvanised Rod Cut to Length and Hooked at one end n/a 500 50 P.O.A - -

Hooked and Threaded rod made to order at required length. Minimum order quantities apply.

FULLY THREADED (BOOKER) ROD

SRB06Z1 * M6 Booker Rod - Fully Threaded Zinc Plated x 1.0m 1000 - 10 P.O.A - 1.800












Lead time and Minimum order quantities apply.

NUTS FOR THREADED ROD (Washers Available To Suit)

N-M06 * M6 Zinc Plated Nuts Box 100 P.O.A - 0.230






JOINERS

SUSPENSION ROD

M272 M38 M140 M254

SR5 SRH SRT

SRB - Booker Rod

N-M06 - 12





M355-30 * 35mm Ceiling Channel 0.5 BMT 3000 100 10 13.81 4.60 1.630

M355-36 * 35mm Ceiling Channel 0.5 BMT 3600 100 10 16.57 4.60 1.960



M324-2 * Ceiling Bracket for cavity distance of 37 - 60 mm 200 100 5.96 - 0.030



M324-8 * Ceiling Bracket for cavity distance of 85 -108 mm 200 100 6.31 - 0.060

*Cavity distance is the distance between the concrete substrate and the back face of the plasterboard lining.



BA3030-055-30 * Perimeter Angle 30 x30 x 0.55 BMT 3000 500 1 9.03 3.01 0.960

SLIMCEIL CHANNEL

SLIMCEIL BRACKETS

PERIMETER ANGLE

M324 M355 BA3030

HOW IT WORKS: 1. Fix the bracket to the substrate 2. Insert channel into bracket 3. Use one slot per side to fix channel to bracket 4. Adjust channel to level 5. Lock in with 2 more screws *Slimceil channel can be joined by boxing a 300mm piece of the channel at the join and screwing off on both sides at each end.

Acoustic SLIMCEIL brackets also available. See Page 19





USGDX30D Main Runner Standard - 3600 3600 1000 20 P.O.A - 1.200

USGDX30M Cross Runner Standard - 1200 1200 3000 60 P.O.A - 0.370

USGDX30S Cross Runner Light - 600 600 6000 60 P.O.A - 0.150



USG2424 Suspension clip - Banana clip with hook 500 50 P.O.A - 0.018

USGGRCL315 Suspension clip - SR5 to Main Runner 500 50 P.O.A - 0.030

M88 Wall Angle to Main Runner or Cross Runner 1000 100 P.O.A - 0.020



USGMT45-3600 Standard Wall Angle 3600mm 3600 - 40 P.O.A - 0.550

USGML45-3600 * Long Leg Wall Angle 3600mm 3600 - 32 P.O.A - 1.000

USGMS45-3000 Standard Shadowline Wall Angle 3000mm 3000 - 40 P.O.A - 0.530

USGMSL45-3600 * Long Leg Shadowline Wall Angle 3600mm 3600 - 24 P.O.A - 1.130



GRAL1 Aluminium Shadowline Wall Angle x 3.6m 3600 10 1 P.O.A - 1.100

GRAL2 * Aluminium Wall Angle 22 x 19 x 3.6m 3600 10 1 P.O.A - 1.100

GRALBH Aluminium Bulkhead Trim Direct Fix x 3.6m 3600 10 1 P.O.A - 1.150



SR5 5mm Galvanised Soft Rod 3600 500 25 4.03 1.12 0.560

GRID

SUSPENSION CLIPS & BRACKETS

WALL ANGLE - METAL

WALL ANGLE - ALUMINIUM

SUSPENSION ROD

EXPOSED GRID CEILING SYSTEM

USG2424 USGGRCL315 M88

GRAL1 GRALBH

USGDX30D USGDX30M USGDX30S

USGMT45-3600 USGML45-3600

USGMSL45 -3600



Part BOX PLT

No. QTY QTY

TILEFRESH * Plaster Tile with white textured vinyl face 1200 x 600 x 9.5mm - 200

TILEKNFS * - 200

Part BOX PLT

No. QTY QTY

USGME904 * USG Impressions ME904 1200x600x15 Square Edge 8 160

USGME905 * USG Impressions ME905 600x600x15 SLT Tegular Edge 16 320

USGME908 * USG Impressions ME908 1200x600x15 SLT Tegular Edge 8 160

USGME2410 USG Radar CP ME2410 1200x600x15 Square Edge 8 160

USGME2420 * USG Radar CP ME2420 1200x600x15 SLT Tegular Edge 8 160

USGME22541 * USG Radar CP ME22541 High NRC 1200x600x19 SLT Tegular Edge 6 120

USGME2220 * USG Radar CP ME2220 600x600x15 SLT Tegular Edge 16 320

USGME2210 * USG Radar CP ME2210 600x600x15 Square Edge 16 320

USGME78575 * USG Eclipse CP ME78575 1200x600x19 Square Edge 6 120

USGME78505 * USG Millennia CP ME78505 1200x600x19 Square Edge 6 120

USGME4421 * USG Olympia Micro CP ME4421 1200x600x15 SLT Tegular Edge 8 160

USGME4411 * USG Olympia Micro CP ME4411 1200x600x15 Square Edge 8 160

USGME4221 * USG Olympia Micro CP ME4221 600x600x15 SLT Tegular Edge 16 320

USGME2882 * USG Illusion 4/48 ME2882 1200x600x19 SLT Tegular Edge 6 120



Part BOX PLT

No. QTY QTY

OWAAL1260SQ OWA Alto Fine Fissure 1200x600x15 SQ - box 8 8 160

OWAAL6060SQ * OWA Alto Fine Fissure 600x600x15 SQ - box 12 12 -

OWAAL1260SLT * OWA Alto Fine Fissure 1200x600x15 SLT - box 8 8 160

OWAAL6060SLT * OWA Alto Fine Fissure 600x600x15 SLT - box 12 10 -

OWACON1260SQ * OWA 610A Constellation 1200x600x15 SQ - box 8 8 160

OWAUN1260SQ * OWA 611A Universal 1200x600x15 SQ - box 8 8 160

OWAFIN1260SQ * OWA 616A Finetta 1200x600x15 SQ - box 8 8 160

OWAFIN1240SBK * OWA 616A Finetta 1200x400x15 SBK - box 10 10 -

OWASI1260SQ * OWA RH99 Sinfonia 0.85NRC 1200x600x15 SQ- box 8 8 160

OWASI6060SQ * OWA RH99 Sinfonia 0.85NRC 600x600x15 SQ- box 12 12 -

OWASI1260SLT * OWA RH99 Sinfonia 0.85NRC 1200x600x15 SLT- box 8 8 -

OWASI6060SLT * OWA RH99 Sinfonia 0.85NRC 600x600x15 SLT- box 10 10 -

OWASIB1260SLT * OWA Sinfonia with Biocide 1200x600x15 SLT - box 8 8 160

OWASIB1260SQ * OWA Sinfonia with Biocide 1200x600x15 SQ- box 8 8 160

OWASIBL6060SQ * OWA Sinfonia BLACK 600x600x15 SQ - box 12 12 -

OWASIBL1260SQ * OWA Sinfonia BLACK 1200x600x15 SQ - box 8 8 160

OWASM1260SQ * OWA RH99 Sandilo Micro 1200x600x15 SQ - box 8 8 160

OWASM6060SQ * OWA RH99 Sandilo Micro 600x600x15 SQ - box 12 12 -

OWASM1260SLT * OWA RH99 Sandilo Micro 1200x600x15 SLT - box 8 8 160

OWASM6060SLT * OWA RH99 Sandilo Micro 1200x600x15 SLT - box 10 10 -

Knauff / Lafarge Spanshield Smooth tile 1193 x 593

USG CEILING TILES

OWA CEILING TILES

PLASTERBOARD CEILING TILES

Square edge / Lay in

Angled Tegular edge

Beveled Tegular edge

Kerfed, Bevelled and Cut Back (SBK)



Part SUB PRICE Approx

No. PACK EACH kg/piece

RM237R Direct Fix Furring Channel Resilient Mount 100 7.77 0.030

RM24R Resilient Joiner Bracket 100 10.89 0.140

RM48R Resilient Mount Right Angle Bracket 100 9.68 0.067

RM96R Furring Channel to Purlin/Joist Resilient Mount 100 11.78 0.086

RM239R Resilient Anchor Clip with Thread for M29 100 9.30 0.740

RMBFR Adjustable Direct Fix Furring Channel Resilient Mount 100 12.72 0.047

RMBFR6 * Betafix Resiliant with 6.5 x 50 ZP Masonry Anchor 100 15.89 0.062

RM237TR Furring Channel to Top Cross Rail Resilmount 250 9.95 0.075

RM324-2 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 37- 60mm cavity 100 P.O.A 0.040

RM324-4 * SLIMCEIL Resilient Mounted Ceiling Bracket, suits 53 - 76mm cavity 100 P.O.A 0.050



Part STOCK SUB LENGTH PRICE Approx

No. PACK PACK (mm) EACH kg/piece

RM239BA65 * Resilient Anchor M17-M29 Clip with 65mm Bolt 100 100 - 10.41 0.100





RM581 * Resilient Furring Channel 200 40 3658 21.00 0.982

RM126 Staggered Stud Clip (Acoustic) 500 100 - 1.34 0.020

RM127 Staggered Stud Clip - Box type (64mm Stud to 92mm Track) 500 100 - 2.93 0.070

RM50R * Isolation/Acoustic Hanger - 54kg Capacity - Black (Other Capacities Available) 100 100 - 13.26 0.070

RN5-38 * Rubber Nut for Fixing Rubber Impact Mats 5mm x 38mm 100 100 - 143.58 0.010

RM07 * Rubber Impact Mats 40 x 40 x 8 100 100 - 71.00 0.011

Part STOCK SUB Width Length PRICE Approx

No. PACK PACK (mm) m EACH kg/roll

WAVEBAR Flexible Noise Barrier

INWB4-05 * WaveBar 4kg - 1350mm x 5.0m Roll - 1 1350 5 P.O.A 27.00



200

200

SOUND ISOLATION SYSTEMSResilmounts

Acoustic Brackets

WaveBar

STOCK

PACK

100

100

100

100

100

100

100

250

200

200

RM237R

RM239BA

RM50R RN5-38 RM07 RM581 RM126 RM127

RMBFR6 RMBFR RM237R

RM48R

RM24R RM96R

RM324 RM237TR





THB24-042-48 24mm x 0.42 BMT (cyclonic) 4800 200 1 14.21 2.96 1.800


THB40-048-48 * 40mm x 0.48 BMT 4800 150 1 28.95 6.03 3.264

TOP HATS & PURLINSTOP HAT CEILING / ROOF BATTENS

THB24 THB35

40mm 38mm

24m

m

35m

m

FastStud keeps a large range of

Tophat Battens, Purlins, & Tophat Junction Studs in

stock.

Span Tables available upon

request

THB40

43mm

40m

m





THB50-075-60 50mm x 0.75 BMT 6000 100 1 59.62 9.94 6.720

THB50-095-60 * 50mm x 0.95 BMT 6000 100 1 74.32 12.39 8.280

THB64-095-60 64mm x 0.95 BMT 6000 100 1 85.89 14.32 9.720

THB64-115-60 * 64mm x 1.15 BMT 6000 100 1 103.25 17.21 11.700

THB75-075-60 * 75mm x 0.75 BMT 6000 100 1 81.39 13.57 8.640

THB75-095-60 75mm x 0.95 BMT 6000 100 1 96.03 16.01 10.860

THB75-115-60 * 75mm x 1.15 BMT 6000 100 1 115.55 19.26 12.952

THB96-075-60 * 96mm x 0.75 BMT 6000 100 1 94.09 15.68 10.620

THB96-095-60 96mm x 0.95 BMT 6000 100 1 117.96 19.66 13.320

THB96-115-60 * 96mm x 1.15 BMT 6000 100 1 141.86 23.64 15.960

THB120-095-60 120mm x 0.95 BMT 6000 100 1 148.13 24.69 16.740

THB120-115-60 * 120mm x 1.15 BMT 6000 100 1 178.27 29.71 19.980

TOP HAT BATTENS / PURLINS

Material: G550 Z275

THB50

THB64

THB75

THB96

THB120

Non standard lengths available upon request. Lead time and minimum order quantities apply.





THJ5015-36 50mm x 15mm x 1.15 TCT 3600 100 1 27.77 7.71 3.260

THJ5015-60 50mm x 15mm x 1.15 TCT 6000 100 1 46.30 7.72 5.430

THJ5024-36 50mm x 24mm x 1.15 TCT 3600 100 1 32.63 9.06 4.220

THJ5024-60 50mm x 24mm x 1.15 TCT 6000 100 1 54.39 9.07 7.030

THJ5035-36 50mm x 35mm x 1.15 TCT 3600 50 1 41.57 11.55 5.020

THJ5035-60 50mm x 35mm x 1.15 TCT 6000 50 1 69.27 11.55 8.360

THJ5035-72 50mm x 35mm x 1.15 TCT 7200 50 1 83.10 11.54 10.030

THJ5050-36 50mm x 50mm x 1.15 TCT 3600 50 1 47.21 13.11 5.977

THJ5050-60 * 50mm x 50mm x 1.15 TCT 6000 50 1 78.65 13.11 8.300



THJ7515-60 75mm x 15mm x 1.15 TCT 6000 100 1 53.01 8.84 6.750

THJ7524-60 75mm x 24mm x 1.15 TCT 6000 100 1 62.72 10.45 8.460

THJ7535-60 75mm x 35mm x 1.15 TCT 6000 50 1 83.51 13.92 9.740

THJ7535-72 * 75mm x 35mm x 1.15 TCT 7200 50 1 100.20 13.92 11.690

THJ7550-36 * 75mm x 50mm x 1.15 TCT 3600 50 1 52.60 14.61 6.816



THJ12035-60 * 120 x 35 x 1.15 TCT TOP HAT JUNCTION STUD x 6.0m* 6000 100 50 84.86 14.14 12.000

THJ12035-72 * 120 x 35 x 1.15 TCT TOP HAT JUNCTION STUD x 7.2m* 7200 100 50 101.83 14.14 14.400

Part LENGTH SUB PRICE Approx Approx

No. (mm) PACK EACH $ l/m kg/piece

THJL5015-36 * 50 X 15 X 0.75 BMT Light Top Hat Junction Stud 3600 100 50 P.O.A P.O.A 3.260

THJL5024-36 * 50 X 24 X 0.75 BMT Light Top Hat Junction Stud 3600 100 50 P.O.A P.O.A -






No. (mm) PACK PACK EACH $ 1/m kg/piece

JHTHEX60 * JH ExoTec Zincalume Top Hat x 6.0m (pk45)* 6000 45 - P.O.A P.O.A -

JHTHEX72 * JH ExoTec Zincalume Top Hat x 6.0m (pk45)* 7200 45 - P.O.A P.O.A -

JHTHIN60 * JH Zincalume Intermediate Top Hat 50 x 35 x6.0m (pk 50)* 6000 50 - P.O.A P.O.A -

JHTHIN72 * JH Zincalume Intermediate Top Hat 50 x 35 x7.2m (pk 50)* 7200 50 - P.O.A P.O.A -

TOP HAT JUNCTION STUD 50mm



TOP HAT JUNCTION STUD - LIGHT

JAMES HARDIE TOP HATS

THJ7515 THJ7524 THJ7535 THJ7550

THJ5015 THJ5024 THJ5035 THJ5050

Non standard lengths available upon request. Lead time and minimum order quantities apply.





JHTHG36 * 10 1 3600 P.O.A 0.500

JHTHB299 * 10 1 2990 P.O.A 1.380

JHTHB239 * 10 1 2390 P.O.A 1.103

JHTHB1.19 * 10 1 1190 P.O.A 0.549



90mm LONG IN BOXES OF 100

PN9001 Nylon Packers 1.5mm x 90mm - 100 90 P.O.A 0.560


PN9005 Nylon Packers 5mm x 90mm - 100 90 P.O.A 1.520


PN9010 Nylon Packers 10mm x 90mm - 100 90 P.O.A 3.000

# 75mm long nylon packers in boxes of 100 or 200 available upon request.

MIXED PACKERS

PNHSTP01 * HandiY nylon Top Hat Packers Mixed Trade Pack - 530 75-90 P.O.A -

Part STOCK SUB PRICE Approx

No. PACK PACK EACH kg/piece

3M0300 * 3M 300 HIPA Clean 1 1 P.O.A. -

3M0700 * 3M 700 Adhesive Cleaner and Solvent 1 1 P.O.A. -

3M4941-12 * 3M VHB Grey Tape 4941 1.1mm x 12mm x 33m 1 1 P.O.A. -





3M8447 * 3M - 8447 SCOTCH BRITE High Cut Pad - Box of 20 1 1 P.O.A. -



BA7575-075-30 75 x 75 x 0.75mm BMT 3000 500 1 34.11 11.37 2.830

BA7575-115-30 75 x 75 x 1.15mm BMT 3000 500 1 47.95 15.98 4.240

BA100100-075-30 100 x 100 x 0.75mm BMT 3000 500 1 43.54 14.51 3.770

BA100100-115-30 * 100 x 100 x 1.15mm BMT 3000 500 1 62.23 20.74 5.650


No. Min Max PACK EACH $ l/m kg/piece

BRTH1 Tophat Bracket Gal 35 x 48 x 35 x 1.9mm BMT - Type 1 for THJ5035 Only 35 50 1 P.O.A - 0.160

BRTH2 Tophat Bracket Gal 55 x 48 x 55 x 1.9mm BMT - Type 2 for THJ5035 Only 55 70 1 P.O.A - 0.220

JAMES HARDIE TOP HAT ACCESSORIESJH ExoTec Gasket Snap Strip x 3.62m

Range (mm)

FACADE ANGLES

TOP HAT BRACKETS

3M TAPES

TOP HAT PACKERS #

JH ExoTec Backing Strip (0.55 x 2.99m)



Tophat brackets give the flexibility of adjustment between 35mm and 70mm from the substrate. Contact Faststud for complete fixing details.





PUC10015-61 * C Purlin 100mm x 1.5BMT x 6.1m 6100 50 1 P.O.A - 15.920



Part Approx Approx

No. $ l/m kg/metre

C/Z10012 * C or Z Purlin 100mm x 1.2 BMT P.O.A 2.080
















Part Approx Approx

No. $ l/m kg/metre

PUCT10012 * Track for C100 Purlin - 1.2BMT - 101mm I.D. P.O.A 2.080



PUCT_____ * Other Track sizes available upon reqest P.O.A -



BRGP100 General Purpose Bracket to suit 100mm Purlin - 1 P.O.A - 0.200



PUB12030F Purlin Bolt & Nut - Flanged M12 x 30mm Zinc 100 1 P.O.A - 0.070

C & Z PURLINS (made to order)

TRACK FOR C PURLINS (made to order)

PURLIN ACCESSORIES

C & Z PURLINSC PURLINS (stocked lengths)

C Purlin Z Purlin

Purlin Bolt & Nut General Purpose

Brackets

Purlin & Track Wall System



Faststud sells a wide range of James Hardie board products and accessories. For availability and pricing please contact Faststud.

Soff

its

Bra

cin

g

Co

lum

ns

Stru

ctu

ral f

loo

rin

g

Scyon Linea weatherboard

Scyon Matrix cladding

Scyon Stria cladding

Bat

hro

om

co

nst

ruct

ion

James Hardie Top Coat

Exte

rnal

cla

dd

ing

PRODUCT

ComTex façade panel and fixing system

EasyLap panel

ExoTec façade panel and fixing system

HardieBrace sheet

HardieBrake thermal strip

HardiePlank weatherboard

Scyon Secura exterior flooring

Scyon Secura interior flooring

Scyon Axon cladding

Versilux lining

Villaboard lining

APPLICATION

Un

der

lays

Cav

ity

con

stru

ctio

n

Co

mm

erci

al f

acad

es

Dec

kin

g

Dec

ora

tive

Eave

s

Fen

cin

g

FIBRE CEMENT PRODUCTS

HardieTex system

James Hardie Base Coat

HardieFlex sheet

HardieGroove lining

HardiePanel compressed sheet

PrimeLine weatherboard

PanelClad sheet

PineRidge lining

Fire

an

d a

cou

stic

ally

rat

ed w

all

Inte

rnal

lin

ing

Join

tin

g co

mp

ou

nd

Ther

mal

bre

ak

James Hardie Products and Application Summary.


Pricing Effective 1st Ocober 2015 (V2.1)

Y*

Y*

28.30

24.50

Y*

21.60

18.93

Y*

Y*

Y*

150

600

Y*

Y*

Y*

Y*

21.10

Y* Y* Y* 12.50

12.60

Y*

19900

22 600

Scyon Secura Flooring

Internal/External

325

40514

16 255

Scyon Stria Cladding

890

1190

8

Y*

Scyon Matrix Cladding

Y*

18016Scyon Linea Weatherboard

590

Scyon Axon Cladding 9 1200

6.72

HardiPanel

(Compressed Fibre Cement)1200 Y* Y*

Y*

15

900 Y* Y*18

900

Y1200

Y*

8.00Scyon Axent Trim45

1989

8.69

Y*

6

600

Y* Y*

Y* Y*

ComTex

91200

ExoTec

(CFC)1200

HardiTex

4.5

HardiFlex

Y*

900

9.54

12

Y* Y Y* Y

Y*

Y

9 1200 Y* 13.20

Y*9.62

13.88

Y Y

16.26

3000 3600Product (mm) (mm)

Y*

Y*

Y* Y*

Y Y Y*

Y Y Y*Y Y

Y* Y*

1200 Y* Y*

Y*27.25

31.87Y* Y* Y* Y*

Y*

Y*

Y* Y*

Y*

Y*

Y* Y* Y* Y*

Y* Y* Y* Y* Y*

7.5

450

600

900

Y*

Y

750

Y* Y*

1200

Y Y 21.90

11.331200 Y* Y* Y

Y* Y* Y900

1225

900 Y Y Y

Y

1200 Y YVersilux

900

9

6

9 1200

1200

Villaboard6

900

FIBRE CEMENT BOARD SIZE SUMMARY (Other sizes available upon request)

PLASTERBOARD THICKNESS WIDTHS LENGTHS (mm) MASS

1200 1500 1800 2100 2400

7.79

kg/m242002700

HardiBrace 5925 Y* Y*

1350 Y

13.94

EasyLap 8.5900

120012.46

HardieGroove 12007.5

Y*

Y*

11.70Y*

Y*

Y* 11.67

HardiePlank 7.5

205

230

300

11.06

11.79

9.32PanelClad 6 1200

Y*

Y* Y*

Y*

Y Y

Y* Y*

1200 Y*

Y Y*



Products for Internal Lining

Typical Internal Villaboard Application

Typical Internal Villaboard Sheet Layout



Products for External Cladding

Scyon Axent trim - is a thick and versetile trim made from Scyon, an advanced cement composite. Scyon Axent trim is an easy way to add finishing touches that keep their finish Scyon Axon cladding is a vertically grooved cladding panel that looks sharp and uniform. Pre-primed and easy to install cladding system with a pristine look that lasts. Scyon Linea weatherboard - is a 16mm thick weatherboard with deep shadow lines. Scyon Matrix cladding - an exterior cladding system with a geometric, expressed-joint look. Scyon Secura exterior flooring - external structural flooring substrate for tile finishes over timber or lightweight steel floor joists. Scyon Stria cladding - features horizontal ship-lapped joint. Pre-primed fast and easy to install for achieving a timeless and classic look.

ComTex facade panel - features pre-primed panel that's site-finished with a high-build acrylic texture system that incoporates reinforced jointing and texture coating. The finished system creates a rendered look without the need for masonry. ExoTec facade panel - is a compressed facade panel featuring expressed joints either site painted or pre-finished off-site. ExoTec facade panel is the most popular fibre cement commercial facade system on the market. HardieFlex sheet - is a smooth, flat sheet that is painted on site to create a flat panel look. HardiePlank weatherboard - is a site-painted weatherboard available in a range of different profiles, from traditional to contemporary. HardieTex blue board system - strong base sheets that are designed to be acrylic render coated with colour and texture, giving a rendered look without the need for masonry. PrimeLine weatherboard - is a pre-primed, site-painted weatherboard, available in a range of profiles from contemporary to traditional.



Various CSR Gyprock and Boral Plasterboards Available on Request please contact Faststud for details.

PLASTERBOARD

ShafLinerShaftLiner is a 25mm fire resistant plasterboard designed for shafts and

ducts in multi-level constructions. ShaftLiner is also used in InterHome

Systems.

SoundShield

WaterShield is a water resistant plasterboard suitable for use in internal

wet areas and as a substrate for tiles.WaterShield

PLASTERBOARD PRODUCT GUIDE

MastaShield

USAGEPLASTERBOARD

MastaShield is a standard plasterboard for internal wall linings and

ceilings. MastaShield suits a wide range of standard applications

SpanShield

SonaRock is an internal gypsum fibre wall and ceiling lining with excellent

sound insulation performance, good fire, impact and moisture resistance.SonaRock

TrueRock is an all round plasterboard. TrueRock incoporates impact,

water, fire resistance as well as sound insulating properties. Ideal

plasterboard for multi-purpose applications.

TruRock

TrueRock HD has added benefits of mould resistance and enhanced

impact performance. This enhanced performance is due to its heavy duty

paper and continuous fibreglass mesh embedded in its high density core.

CurveShield

TruRock HD

FireShield

SpanShield is a 10mm reinforced plasterboard for ceilings. It is designed

to span internal ceiling joists or furring channels up to 600mm without

sagging

FireShield is a fire resistant plasterboard for internal lining applications

where a Fire Resistance Level (FRL) is required.

CurveShield is a thin flexible plasterboard that can be used to create

curved walls and ceilings.

SoundShield is a plasterboard with high density core providing excellent

sound insulation for residential and coremercial applications. Used in wall

and ceiling systems, SoundShield provides superior levels of sound

resistance.



As well as plasterboard Faststud sells a wide range of jointing and setting compounds and products. Please

see Plastering Accessories & Tools section on page 42 for full range of products supplied.

12.30

PLASTERBOARD SIZE GUIDEPLASTERBOARD THICKNESS WIDTHS

Y* Y*

1200 Y Y

1350 Y* Y* Y*

Product (mm) (mm) 600

1200

Y* Y* Y*

Y*

Y* Y* Y*

Y* Y*

Y*

Y

YY*

Y

10

13

MastaShield

MASS

kg/m2

1350 Y Y

2700

LENGTHS (mm)

3000 3600 4200 4800 5400 60002400

Y* Y*Y*

SpanShield 101200

1350

Y*

Y*

Y*

Y*

Y*

Y*

Y*

Y*

Y*

WaterShield10

13 1200

1200

1350

Y*

Y*

Y*

Y*

Y*

Y*

Y*

Y

1350 Y*SoundShield10

13

1200 Y*

1200 Y

9.70

12.30

6.50

8.20

7.00

7.40

8.40

Y* Y*

Y*

Y*

4.20

FireShield

1200

1350

Y* Y*

YCurveShield 6.5 1200

Y*

10.50

12.30

Y* Y*

14.80

Y*

Y Y*

TruRock13

1200

Y*16

1350

1200

Y*

131350

120016

1200

Y*

Y*

YY*

20.00Y*

SonaRock

ShafLiner

13

25 600 Y*

TruRock HD Y*

13

16

15.50

19.00

12.30

1200

1200

Y*

Y*

Y* Y*

Stud Adhesive





CEX90-24 External Angle - 90° 2400 3300 50 3.98 1.66 0.370




CEX90D-30 * Plasterlock External Angle - 90° 3000 480 20 P.O.A - 0.470

CEX135-24 * Splayed External Angle - 135° 2400 3300 50 4.79 2.00 0.370


CEX135-30 Splayed External Angle - 135° 3000 3300 50 5.97 1.99 0.470




CIN90-24 Internal Angle - 90° 2400 3300 50 5.17 2.15 0.380



CIN90-36 * Internal Angle - 90° 3600 3300 50 7.74 2.15 0.570

CIN135-30 Splayed Internal Angle - 135° 3000 3300 50 8.31 2.77 0.480

Other lengths upon request.



SL6 Shadowline 6mm x 10mm (AxB) 3000 500 20 7.35 2.45 0.470

SL10 Shadowline 10mm x 10mm (AxB) 3000 500 20 7.05 2.35 0.490

SL1020-30 * Shadowline 10mm x 20mm (AxB) 3000 500 20 10.44 3.48 0.490



LSA10 Long Leg Stopping Angle 10mm 3000 500 20 6.99 2.33 0.430



PLASTERBOARD FINISHING SECTIONSEXTERNAL CORNERS

INTERNAL CORNERS

SHADOWLINE STOPPING ANGLE

STOPPING ANGLE

CEX90 CEX90D CEX135

CIN90 CIN135

LSA

SL

A

B





PAB180-30 Perforated Arch Bead - Round holes 3000 500 50 5.45 1.82 0.320



SB6-30 Metal Stopping Bead 6mm 3000 200 20 8.63 2.88 0.500







MCB6-30 Metal Casing Bead 6mm 3000 200 20 7.77 2.59 0.630







EXJ6 Expansion Joint 6mm - Black rubber 3000 15 15 44.17 14.72 0.580

EXJ10 Expansion Joint 10mm - Black rubber 3000 15 15 44.17 14.72 1.180

EXJ10R Expansion Joint - White rubber - Suits all board thicknesses. 3000 100 10 47.98 15.99 1.240

MB005 Back Blocking Batten with 2.5mm Bend x 300mm 300 - - 2.38 - 0.090



BA3030-004-30 * 30 x 30 x 0.4mm BMT 3000 500 1 4.48 1.49 0.572

BA3030-055-30 * 30 x 30 x 0.55mm BMT 3000 500 1 9.03 3.01 0.960

BA3535-075-36 35 x 35 x 0.75mm BMT 3600 500 1 13.60 3.78 1.580

BA5050-075-36 50 x 50 x 0.75mm BMT 3600 500 1 18.70 5.19 2.230

BA5050-115-36 50 x 50 x 1.15mm BMT 3600 500 1 29.05 8.07 3.360

BA7575-075-30 75 x 75 x 0.75mm BMT 3000 500 1 34.11 11.37 2.830

BA7575-115-30 75 x 75 x 1.15mm BMT 3000 500 1 47.95 15.98 4.240

BA100100-075-30 100 x 100 x 0.75mm BMT 3000 500 1 43.54 14.51 3.770

BA100100-115-30 * 100 x 100 x 1.15mm BMT 3000 500 1 62.23 20.74 5.650



BAS7550-120-27 * 75 x 50 x 1.2mm BMT 2700 200 1 P.O.A P.O.A 3.270

BAS5050-075-24 50 x 50 x 0.75mm BMT 2400 500 1 P.O.A P.O.A 1.486

ARCH BEAD

STOPPING BEADS

CASING BEADS

EXPANSION JOINTS

BACKING ANGLES

HEBEL® SLOTTED ANGLES

Custom size backing angles can be made to order

PAB180

SB

MCB

EXJ10 EXJ10R

BA





PVCCB06 * PVC Casing Bead 6mm 3000 50 50 P.O.A - 0.240

PVCCB10 PVC Casing Bead 10mm 3000 50 50 P.O.A - 0.240

PVCCB13 PVC Casing Bead 13mm 3000 50 50 P.O.A - 0.320

PVCSB13 * PVC Set Casing Stopping Bead 13mm x 3.0m 3000 50 50 P.O.A - 0.280

PVCCEX135 PVC External Corner Angle 135° (Adjustable from 120° TO 140°) 3000 50 50 P.O.A - 0.220

PVCCEX90 PVC External Corner Angle 90° 3000 50 50 P.O.A - 0.300

PVCCIN135 PVC Internal Corner Angle 135° (Adjustable from 70° to 150°) 3000 70 70 P.O.A - 0.260

PVCMAG60 * PVC Magic Corner Bead & Expansion Joint - Flexible 60m Roll 60m 1 1 P.O.A - 4.580

PVCMAG35 * PVC Magic Corner Kit - Includes 35m roll + installation tool and adhesive 35m 1 1 P.O.A - 9.000

PVCEXJ10 * PVC Deep V Expansion Joint with Tearaway Strips 3000 20 20 P.O.A - 0.500

PVCEXJH PVC Hideaway Expansion Joint with Tearaway Strips 3000 25 25 P.O.A - 0.510

PVCL06T PVC Tearaway L Bead 6mm 3000 50 50 P.O.A - 0.230



PVCL25 * PVC Oversized L Bead 25mm 3000 50 50 P.O.A - 0.430

PVCL32 * PVC Oversized L Bead 32mm 3000 50 50 P.O.A - 0.510

PVCL68 * PVC Oversized L Bead 68mm (Also pre scored at 53mm) 3000 30 30 P.O.A - 0.860

PVCL80 * PVC Super L Bead 80mm (Also pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A - 0.980

PVCL145 * PVC Giant L Bead 145mm (Also pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A - 1.630

PVCABL16 * PVC Archway L Bead 13mm & 16mm 3000 50 50 P.O.A - 0.280

PVCABL80 * PVC Archway Super L Bead 80mm (Pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A - 0.980

PVCABL145 * PVC Archway Giant L Bead 145mm (Pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A - 1.630

PVCABEX * PVC Archway Corner Bead 90° 3000 50 50 P.O.A - 0.300

PVCSL06T PVC Tearaway Shadowline 6mm 3000 25 25 P.O.A - 0.220

PVCSL10T PVC Tearaway Shadowline 10mm 3000 25 25 P.O.A - 0.240

PVCSL10TF * PVC Flexible Shadowline 10mm with Tearaway Strip 3000 25 25 P.O.A - 0.250

PVCTRIM PVC Finish Trim for L Beads and Window Reveals 3000 30 30 P.O.A - 0.110

PVCGA * PVC Flexible Wall Angle for ceiling grid 28mm x 22mm 2400 63 63 P.O.A - 0.420

PVCFC89 * PVC 89mm Wall Fast Cap for 64mm stud with 13mm plasterboard 3000 10 10 P.O.A - 1.250

PVCSPAD PVC Spray Adhesive 467 g - 12 1 P.O.A - 0.594

PVCSPCL * PVC Spray Citrus Cleaner 467g - 6 1 P.O.A - 0.556

PVC FINISHING SECTIONS

Magic Corner Kit Includes spray adhesive

and installation tool.

Spray Adhesive & Cleaner

PVCCB 10/13

PVCCIN 135

PVCGA

PVC TRIM

PVCEXJ10

PVCEXJH PVCL10T

PVCCIN 90

PVCCEX 135

PVCCEX90

PVCSL10T PVCABEX 90

PVCAB L16

PVCABL145 PVCL145 PVCABL80

PVC SL10TF

PVCFC89

PVCMAG

PVCL80

PVCSB13

PVCMAG35





FC79-27 * EZY CAP 79 x 0.8 x 2700mm. (Suits 51mm stud + 13 + 13) 2700 - 1 P.O.A - 2.250

FC86-27 EZY CAP 86 x 0.8 x 2700mm. (Suits 64mm stud + 10 + 10) 2700 - 1 P.O.A - 2.360









RA20-30 * 20mm x 0.75 BMT 3000 25 1 P.O.A - 0.900

RA20-36 3600 25 1 P.O.A - 1.080

RA25-30 25mm x 0.75 BMT 3000 25 1 P.O.A - 1.050

RA25-36 3600 25 1 P.O.A - 1.260

RA30-30 * 30mm x 0.75 BMT 3000 25 1 P.O.A - 1.250

RA30-36 3600 25 1 P.O.A - 1.500

RA35-30 35mm x 0.75 BMT 3000 25 1 P.O.A - 1.300

RA35-36 * 3600 25 1 P.O.A - 1.560

RA40-30 * 40mm x 0.75 BMT 3000 25 1 P.O.A - 1.240

RA40-36 * 3600 25 1 P.O.A - 1.490

RA45-30 45mm x 0.75 BMT 3000 25 1 P.O.A - 1.430

RA45-36 3600 25 1 P.O.A - 1.720

RA50-30 50mm x 0.75 BMT 3000 25 1 P.O.A - 1.600

RA50-36 3600 25 1 P.O.A - 1.920

RA60-30 * 60mm x 0.75 BMT 3000 25 1 P.O.A - 1.700

RA60-36 3600 25 1 P.O.A - 2.050

RA65-30 65mm x 0.75 BMT 3000 25 1 P.O.A - 1.900

RA65-36 3600 25 1 P.O.A - 2.280

RA75-30 * 75mm x 0.75 BMT 3000 25 1 P.O.A - 1.980

RA75-36 3600 25 1 P.O.A - 2.370

RA80-30 * 80mm x 0.75 BMT 3000 25 1 P.O.A - 2.070

RA80-36 3600 25 1 P.O.A - 2.480

RA90-30 90mm x 0.75 BMT 3000 25 1 P.O.A - 2.300

RA90-36 3600 25 1 P.O.A - 2.760

RA100-30 100mm x 0.75 BMT 3000 25 1 P.O.A - 2.500

RA100-36 3600 25 1 P.O.A - 3.000

RA110-30 * 110mm x 0.75 BMT 3000 25 1 P.O.A - 2.610

RA110-36 3600 25 1 P.O.A - 3.130

RA120-30 * 120mm x 0.75 BMT 3000 25 1 P.O.A - 2.900

RA120-36 3600 25 1 P.O.A - 3.480

RA135-30 135mm x 0.75 BMT 3000 25 1 P.O.A - 3.060

RA135-36 * 3600 25 1 P.O.A - 3.670

RA150-30 150mm x 0.75 BMT 3000 25 1 P.O.A - 3.700

RA150-36 3600 25 1 P.O.A - 4.440

PVCTRIM PVC finish trim to create custom reveal sizes 3000 30 1 P.O.A - 0.110

EZY CAP™

EZY REVEAL™



Custom finishing and capping of plasterboard is made easy with Fastcaps® range of custom made finishing sections. Our custom design and consultancy team is ready to help design and produce an innovative solution to your requirements for any size project. Fastcaps® custom finishing section make the finishing of difficult plasterboard profiles, rebates and large oversized shadowlines a dream. Enquire now for a fast solution to all your requirements.

Custom Finishing Sections

The Flush Finish Cavity Slider

Standard Cavkit

Optional Cavkit

Cavkit can be used to transform standard cavity sliders into architrave free, flush finish cavity sliders. This also compliments and tones in with the Ezyjamb® flush finish door jamb system. The Cavkit is made up of Ezyreveal® and Ezycap® to trim and cap the plaster edges around the door penetration. Custom made closer cap can be produced to suit any specification. For more information visit the Ezyjamb website: www.ezyjamb.com.au

Custom Shadowline

Custom Rebates & Profiles

X Y

X ≤ Y

Custom Sizes Manufactured to your project requirements



(mm)

*

*

*

*

*

*

*

*

*

*

*

*

(mm)

*

*

Other Flat Bar Widths Availble on request

100

100

-

100m13mm Cover Tape Grey x 100m Roll

Skirting Corner Stake Black x 100mm

P.O.A

P.O.A.

P.O.A

100

-

50

50

Bag

Skirting Corner Stake Grey x 100mm

Skirting Screws - 3/4 X 6g Pan Head (CSK, Z/P)

0.805

0.010

0.010

P.O.A

10

10

10

-

-

1

1

1.880

2.420

2.420

0.805

P.O.A

P.O.A

P.O.A

P.O.A

200

200

200

-

2750

3600

2800

100m

AS009XPKB

AS009XPKG

AS346GP

ASIMRLB

ASIMRLG

150mm Skirting 10µm Clear Anodised x 2.75m

150mm Skirting 10µm Clear Anodised x 3.6m

150mm Skirting Satin Black x 2.75m

AS01527A

AS01536A

AS01527PB

Moulded Infill Tape Black x 100m Roll

PACK EACH kg/pcPACK

0.300

AA2516FPB Flat Bar 25 x 1.6m Satin Black x 2.75m 2750 20 1 P.O.A 0.300

AS2516FA Flat Bar 25 x 1.6m 10µm Clear Anodised x 2.75m 2750 20 1 P.O.A

No.

P.O.A

1.260AS00927PB 100mm Skirting Satin Black x 2.75m 2750 200 10 P.O.A

AS00936PB 3600 P.O.A100mm Skirting Satin Black x 3.6m 10200 1.620

ALUMINIUM SECTIONSPart

SKIRTINGLENGTH STOCK SUB PRICE Approx

No. PACK

Part

FLAT BARLENGTH STOCK SUB PRICE Approx

PACK EACH kg/pc

1.260

AS00936A 100mm Skirting 10µm Clear Anodised x 3.6m 3600 200 10 P.O.A 1.620

AS00927A 100mm Skirting 10µm Clear Anodised x 2.75m 2750 200 10

For full range of aluminium sections please contact Faststud Sales on 1300 88 3278

Skirting

Cover Tape

Corner Stakes

Flat Bar

Skirting Screws



ALUMINIUM PARTITION SECTIONS




*

*

* *

*

*

*

*

* *

*

* *

* *

*

2 1

1 14 1

APMWFL3030

APMWFL4545

APMWFL6060

450 x 450 exposed flange

600 x 600 exposed flangeAPMFL6060 600 x 600 exposed flange

4 1

4 1

4 1

4 1

4 1

4 1

4 1

Part

Description

STOCK SUB

1

2 1

1 1

No. PACK PACK

4

450 x 450 set bead

600 x 600 set bead

APMWSB3030 300 x 300 set bead

2 1

2 1

4 1

4 1

2

2

1

4 1

4 1

4 1

APMTLSB2020

APMTLSB3030

200 x200 set bead

MDF -Rw33 Sound Rated

MDF -Non Rated MDF -Non Rated With Tip Latch

Part

No.

4

300 x300 exposed flange

4 1

Part

No.

300 x 300 set bead

APMTLSB4545 450 x 450 set bead

APMTLSB6060 600 x 600 set bead

Description

STOCK SUB

PACK PACK

1

1

APMWSB4545

APMWSB6060APMFL4545 450 x 450 exposed flange

APMFL4560 450 x 600 exposed flange


APMSB5555 550 x 550 set bead


APMFL2020 200 x200 exposed flange

APMFL3030 300 x300 exposed flange


ACCESS PANELS




STOCK SUB

PACK PACK

APMSB2020 200 x200 set bead

Description


MDF removable door with concealed hinges & budget lock

MDF door and metal frame with concealed hinges and tip latches (Non

Rated)

Metal door with concealed hinges & budget lock

Metal door with concealed hinges & budget lock - Rw30

Custom size panels available on request

Fire rated hinged panel with budget lock



* *

*

* *

*

*

*

*

*

* *

*

* *

* *

*

* *

* *

* *

* *

* *

* *

* *

* *

* *

* *

* *

* *

* *

* *

APTSPA3030 Steel Frame 300 x300 1 1

APTSPASS3030 Stainless Frame 300 x 300 1 1


APTSPA4545 Steel Frame 450 x 450 1 1


APF2FL4545 450 x 450 exposed flange 1 1


APTSPA3045 Steel Frame 300 x 450 1 1

Tile/Spa Panels

Part

Description

STOCK SUB

No. PACK PACK

APTSPA2020 Steel Frame 200 x200 1 1

APF2SB3030 300 x 300 set bead 1 1

APF2SB4545 450 x 450 set bead 1 1

Fire Rated Panels - 2 Hours

Part

Description

STOCK SUB

No. PACK PACK



APF1SB6060 600 x 600 set bead 1 1

APF1FL3030 300 x300 exposed flange 1 1

APF1SB3030 300 x 300 set bead 1 1

APF1SB4545 450 x 450 set bead 1 1

Fire Rated Panels - 1 Hour

Part

Description

STOCK SUB

No. PACK PACK

4 1APSFL6060 600 x 600 exposed flange 4 1

APSWFL6060 600 x 600 exposed flange 2 1

APSWFL4545 450 x 450 exposed flange


APSWFL3030 300 x300 exposed flange 4 1

APSWSB6060 600 x 600 set bead

APSFL5555 550 x 550 exposed flange 4 1


APSWSB4545 450 x 450 set bead 4 1

APSWSB3030 300 x 300 set bead

APSFL4545 450 x 450 exposed flange 4 1

200 x200 exposed flange 4 1

No. PACK PACK

Metal -Rw30 Sound RatedAPSSB6060 600 x 600 set bead 4 1

Part

Description

STOCK SUBAPSFL2020

APSFL3030 300 x300 exposed flange 4 1

APSSB4560 450 x 600 set bead 4 1

APSSB5555 550 x 550 set bead 4 1

4 1

APSSB4545 450 x 450 set bead 4 1 APSTLSB6060 600 x 600 set bead 4 1

APSSB4040 400 x 400 set bead 4 1 APSTLSB4545 450 x 450 set bead

4 1

APSSB3030 300 x 300 set bead 4 1 APSTLSB3030 300 x 300 set bead 4 1

APSSB2020 200 x200 set bead 4 1 APSTLSB2020 200 x200 set bead

STOCK SUB

No. PACK PACK No. PACK PACK

Part

Description

STOCK SUB Part

Description

Metal -Non Rated Metal -Non Rated With Tip Latch

Aluminium Manhole Frames

Part

Description

STOCK SUB

No. PACK PACK

MHF6045 600 x 450 Frame 1 1

MHF6060 600 x 600 Frame 1 1

MHF3030 300 x 300 Frame 1 1

MHF4040 400 x 400 Frame 1 1

MHF4545 450 x 450 Frame 1 1

MHF12060 1200 x 600 Frame 1 1

APSSB60120 600 x 1200 set bead 1 1

APSFL60120 600 X 1200 exposed flange 1 1

11300 x300 exposed flangeAPF2FL3030

11600 x 600 set beadAPF2SB6060

MHF5555 550 x 550 Frame 1 1

TILE/SPA PANELS Fibre cement door with steel frame & recessed face to give flush

tiled finish. Hinged with screw type lock. Aluminium manhole frame.

Custom size panels available on request



Part Length Width SUB PRICE Approx Approx

No. mm mm PACK EACH $ l/m kg/piece

SEMDF6410-27 Suits 64mm stud + 10mm plaster 2700 91 1 17.54 6.50 3.800






Part Length STOCK SUB PRICE Approx Approx

No. m PACK PACK EACH $ l/m kg/piece

TPMASK50 * No. 595 High Temperature Masking Tape 50mm x 50m 50 24 1 8.35 - 0.350

TPM5090 Easy Tape - 50mm Self Adhesive Fibreglass 90 24 1 6.95 - 0.350

TPP5075 Paper Tape - 50mm Perforated 75 20 1 2.95 - 0.600

TPP50150 Paper Tape - 50mm Perforated 150 10 1 5.95 - 0.900

INFT4850R Aluminium Foil Tape 48mm x 50m roll 50 24 1 P.O.A - 0.198

INFTA001 * Aluminium Foil Tape 72mm x 50m roll 50 16 1 P.O.A - 0.290

INFTA002 * White Foil Tape 72mm x 50m roll 50 16 1 P.O.A - 0.290

TPFE3-48 * EPDM Foam Tape - Adhesive 3.2mm (Express Wall Vertical Gasket) 25 5 1 P.O.A - -

TPFN3-18 * PVC Nitrile Foam Tape - Adhesive (Express Wall Horizontal Gasket) 9 16 1 P.O.A - -

TPFP6-60 * PVC Foam Tape - Adhesive 6mm x 60mm x 15.2m Roll 15.2 8 1 P.O.A - -

Part SUB PALLET PRICE Approx

No. PACK PACK QTY EACH kg/piece

KNF-BASE MASTABASE COAT- 20kg bag 1 1 56 P.O.A 20.000

KNF-BASELONG * MastaBase Longset 60 - 20kg bag 1 1 56 P.O.A 20.000

KNF-MTAPE * MastaTape - Premixed base compound - 16kg bucket 1 1 56 P.O.A 20.000

KNF-MLITE * MastaLite Top Coat - 17kg bucket 1 1 56 P.O.A 20.000

KNF-TOP MASTAGLIDE Top Coat - 20kg bucket 1 1 32 P.O.A 20.000

KNF-CC45 MastaCove45 Cornice Cement - 20kg bag 1 1 48 P.O.A 20.000

KNF-CC75 * MastaCove75 Cornice Cement - 20kg bag 1 1 56 P.O.A 20.000

KNF-MAS * MastaBond Masonry Adhesive - 20kg bag 1 1 56 P.O.A 20.000

BOR-BC45 Boral - Base Cote 45 - 20kg bag 1 1 56 P.O.A 20.000

BOR-BC60 Boral - Base Cote 60 - 20kg bag 1 1 56 P.O.A 20.000

BOR-FC Boral - FINALCOTE - (Top coat) - 20kg bucket 1 1 48 P.O.A 20.000

BOR-CA60 Boral - Cornice Adhesive 60 - 20kg bag 1 1 56 P.O.A 20.000

CSR-BASE45 CSR Base Coat 45 20kg bag 1 1 56 P.O.A 20.000

CSR-BASE60 CSR Base Coat 60 20kg bag 1 1 56 P.O.A 20.000

CSR-JOINT CSR Joint Master top coat 20kg bucket 1 1 48 P.O.A 20.000

CSR-CORN45 * CSR Cornice Adhesive 45 20kg bag 1 1 56 P.O.A 20.000

CSR-CORN60 * CSR Cornice Adhesive 60 20kg bag 1 1 56 P.O.A 20.000

CSR-MASAD * Gyprock Drywall Masonry Adhesive 20kg bag 1 1 56 P.O.A 20.000

CSR-HEBAD * CSR Hebel Adhesive 20kg bag 1 1 52 P.O.A 20.000

PLASTERING ACCESSORIES & TOOLSMDF STOP ENDS

TAPES

PLASTERBOARD COMPOUNDS

Easy Tape Paper Tape Foam Tape Foil Tape Masking Tape

Stud Adhesive





BOSULTRA Bostik Ultra Grip stud adhesive 5.2kg bucket 1 1 P.O.A 5.200

BOSFIREB1 Bostik - Fireban One Limestone 600ml Sausage 20 1 P.O.A 0.950

BOSFIREC Bostik - Firecaulk Limestone 600ml Sausage 20 1 P.O.A 0.950

BOSGAP Bostik - GAP Seal 450g cartridge 20 1 P.O.A 0.950

BOSGNOZ Bostik - Sausage gun nozzle white - pack of 10 10 1 P.O.A 0.950

BOSGUN * Bostik - 600ml Sausage Barrel Gun 1 1 P.O.A 0.950

BOSNONAIL-320 * Bostik -No More Nails 320gm Cartridge 20 1 P.O.A 1.092

BOSPUCG * Bostik - PU Construction Grey 600ml sausage 20 1 P.O.A 1.092

BOSSNF1BLK * Bostik - Seal n Flex 1 Black 600ml Sausage # 20 1 P.O.A 1.092

BOS5CLM-C * Bostik - 5CLM Silicone 300ml Cartridge - Black Charcoal # 15 1 P.O.A -

BOSBBBC50 * Bostik BC50 - Blueboard Basecote 15kg Pail 32 1 P.O.A 15.000

BOSBBTC50 * Bostick TC50 - Blueboard Topcote 15kg Pail 32 1 P.O.A 15.000

BOSBOG1KG * Bostik - Builders Bog 1kg Pail 6 1 P.O.A 1.000

BOSBRO10 * Bostik - Open Cell Backing Rod 10mm x 210m - Orange # 1 1 P.O.A -

BOSULTRA Bostik - Ultragrip Stud Adhesive - 5.2kg Bucket 100 1 P.O.A 5.200

BOSHANDI * Bostik - Handi Clean Towels Wipes 90/pk 6 1 P.O.A 5.200

#Other colours available

PASACG1 Cartridge Caulking Gun "Little Red" for 300ml cartridges 1 1 P.O.A 0.520

PASA750 Fuller 750 Multi Purpose translucent Silicone 300g 20 1 P.O.A 0.370

PASAFSS Fuller Firesound Acrylic Sealant Sausage 600ml Grey 15 1 P.O.A 0.950

PASAFFR * FULAFOAM Fire Retardent Expanding Foam 500g 12 1 P.O.A 0.630

PASAFF500 * FULAFOAM - Triple Expanding 500ml 12 1 P.O.A 0.628

PASAGF * Fuller Gap Filler White 450g 20 1 P.O.A 0.510

PASAMAX * Max Bond Adhesive Cartridge 320g 20 1 P.O.A 0.370

PASAMAXFGS * Max Bond Fast Grip Adhesive Sausage 600ml 15 1 P.O.A 0.960

PASAS101B * SuperSeal 101 Polyurethane Joint Sealant 600ml Sausage Black 20 1 P.O.A 0.950

PASAS101G * SuperSeal 101 Polyurethane Joint Sealant 600ml Sausage Grey 20 1 P.O.A 0.950


SIKAPROSB Sikaflex Pro - PU Joint Sealant 600ml Sausage Black # 20 1 P.O.A 0.950

SIKA11FCSB * Sikaflex 11FC-Fast Curing PU Sealant 600ml Sausage Black # 20 1 P.O.A 0.950

SIKABRO10 * Sika Foam Backing Rod (Open Cell) 10mm x 210m Roll 1 1 P.O.A 1.092

SIKABRO16 * Sika Foam Backing Rod (Open Cell) 15mm x 150m Roll 1 1 P.O.A 1.092

SIKAABRO22 * Sika Foam Backing Rod (Open Cell) 20mm x 100m Roll 1 1 P.O.A 1.120

SIKAFIREPU * Sika Firerate - PU Fire Resistant Sealant Sausage 600ml 12 1 P.O.A 0.940

SIKAFIREAC * Sika Firerate -Acrylic Sausage 600ml Grey 12 1 P.O.A 0.950


SEALANTS & ADHESIVES

Cartridge Caulking Gun

Backing Rod

Sausage Caulking

Gun



Part STOCK SUB

No. PACK PACK

PASP100 Sandpaper Sheet Small (85 x 305mm) 120 grit - Pack of 20 25 20



PASP103 * Sandpaper Sheet Large (110 x 370mm) 120 grit - Pack of 20 25 20



PASP200 Super Pads 225mm x 120 grit - Pack of 5 20 5




PASP300 Sanding Block Small Fine/Med 110 x 68 x 26mm 12 1

PASP301 * Sanding Block Small Med/Coarse 110 x 68 x 26mm 10 1

PASP305-10 * Sanding Block Angled Fine/Med 125 x 70 x 25mm 10 1

PASP308 * Sanding Block Jumbo Fine/Med 225 x 76 x 25mm 100 1

PASP310 * Sanding Sponge Fine 140mm x 115mm x 5mm 50 1

Part STOCK SUB

No. PACK PACK

PATLS001 * Hand Sander Small Plastic 230mm 10 1

PATLS002 * HYDE Hand Sander Polypropylene Base 230mm 5 1

Part STOCK SUB

No. PACK PACK

PAPENCIL Carpenters Pencil Medium Lead 50 1

PATM1 Sterling V-Force 25mm x 8m 25 8

PATM2 Faststud Plaster X Magnetic Tip 25mm x 10m 25 10

Part SUB

No. PACK

PATLSCI * Intex Stud Crimper 1

PATLSCL * Builders Edge Stud Crimper - Long Handle 1

PATLSP * Stud Punch - Punches a 34mm service hole in studs. 1

PATLSPG1 * Stud Punch Insert- Easy Snap in Grommet-Pack 100 100

Part SUB

No. PACK

PATLTSG * Aviation Tin Snips - Right Cut - GREEN 1

PATLTSR * Aviation Tin Snips - Left Cut - RED 1

PATLTSY Aviation Tin Snips - Straight Cut - YELLOW 1

Part SUB

No. PACK

FLOORCARP1 Carpet Saver Self Stick 1m x 100m 1

FLOORCARPA * Carpet Saver Aplicator Tool 1

FLOORPOLY1 * Polyweave Floor and Carpet Protection 1.83m x 100m 1

FLOORPOLY2 * Polyweave Floor and Carpet Protection 4m x 50m 1

FLOORSAVE1 Hard Floor Self Stick 1m x 100m 1

DROP SHEETS AND FLOOR SAVERS

TIN SNIPS

ABRASIVES

HAND SANDERS

PENCILS & TAPE MEASURES

STUD CRIMPERS & HOLE PUNCH

PATLSCI

PATLTS

PATLSP

PATLSPG1

PATLS002

PATLS001

PASP308

PASP300

PASP305

PASP310

PASP2

PASP1

PATM2 with Magnetic Tip

PATM1

FLOORCARP1

FLOORPOLY1



Part SUB

No. PACK

PATLRG1 * Riveting Tool 1

Part SUB

No. PACK

PATLBC350 Bolt Cutters 350mm 1

PATLBC450 * Bolt Cutters 450mm 1

Part SUB

No. PACK

PATLKN1 Shark Fixed Trimming knife 1

PATLKN2 Plastic Cutter 18mm with snap off blade 1

PATLKN3 * Folding QuickLoc Knife with rubber grip and belt clip 1

PATLKNB1 Blades - Trimming Knife - Dispenser of 10 10

STER550-660 * Sterling T-Rex 6/150mm Hardpoint Drywall Saw 1

STER550-770 * Sterling T-Rex 22/550mm Hand Saw 1

Part SUB

No. PACK

STRRAT25-5 Ratchet Strap Light Duty 25mm x 5.0m 1

STRRAT50-9 * Ratchet Strap Heavy Duty 50mm x 9.0m - Rated to 2500kg 1 `

Part SUB

No. PACK

PAPC1 Plasterboard Cart - DC1350 1

The DC1350 Plasterboard Cart has a strong A-Frame designed to carry up to 1350kg. It boasts two lockable

castor wheels offering exceptional maneuverability and dismantles to fit in the boot of most cars.

Part SUB

No. PACK

PPEMASK1 DM1 Mask - P1 Without Valve - Pack of 10 10

PPEMASK2 DM2 Mask - P2 With Valve - Pack of 10 10

PPESPEC1 UVEX Safety Specs - Clear 1

PPESPEC2 UVEX Pheos Safety Specs - Tinted 1

PPESPEC3 UVEX Pheos Safety Specs Blk/Org SCT Lens 1

PPEHHATW * Hard Hat 410 White 1

PPEGLOVRIGGER Gloves Leather Riggers Warrior - S/M/L/XL 1

PPEGLOVCONTRACT Glove Nitrile Ultratech Foam W967 3B - S/M/L/XL 1

PPEGLOVSTG001 * StudcoTough Drywallers Glove - M/L/XL 1

PPEGLOVUNIDUR Uvex UnidurGlove Cut 5 - Size 7/8/9/10/11 1

PPEGLOVCLIP Uniform Glove Clip - Poly Black 1

PPEEARPLUGS Earplugs Prosoft L4 EPPSR (200/Box) 1

PPEOVERALL Coverall Micromax NS AMN428E White - M/L/XL/2XL 1

SAFETY GEAR

RIVETING TOOL

BOLT CUTTERS

SAWS, KNIVES & BLADES

RATCHET STRAPS

PLASTERBOARD CART

PATLKN2

PATLKN1

PATLKN3

PATLKNB1

Ratchet Straps

Dust Masks

PATLRG1

PATLBC350

DC-1350



*

*

*

*

*

*

*

*

*

*

Gorilla - Wheel kit to suit Gorilla platform ladders

Gorilla Aluminium Adjustable Platform 120kg - 390mm wide

GORPLWHEEL

SCSN01 Collapsable Scaffolding Kit

Gorilla - Dual Purpose Double Sided Aluminium ladder 150kg

Gorilla - Aluminium tray to fit Gorilla platform ladders

Gorilla - Platform ladder Aluminium 0.9m (3ft) 150kg



GORDM007-I

GORPL006

GORPL004

GORPL003

GORPLTRAY

1 42.00

SCSN02 Hand Rail for Collapsable Scaffold 1 3.00

1

20.90

12.16

1

1

1

3.00

14.80

16.601

1

LADDERS & PLATFORMS

8.62

8.00

3.00

Part

Ladders and PlatformsSub Approx

No. Pack kg/piece

GORMW105-I450 1

1GORMW105-WB

Gorilla Adjustable Aluminium Platform 150kg - 450mm wide

Refer to Faststud's Marketing & Pricing Policy for delivery fees . Pickup is available from Faststud.

SCSN01

Collapsable Scaffold Kit

GORPL03 GORPL04 GORPL06

GORMW105

GORMW105-I450



Part BOX SUB PRICE Approx

No. QTY PACK EACH kg/piece

BUTTON HEAD NEEDLE POINT STITCHING SCREW ZP

SDBT0813 * 8g-15 x 13 1000 - P.O.A 1.640

SDBT0816 8g-15 x 16 1000 - P.O.A 1.740

SDBT0825 * 8g-15 x 25 1000 - P.O.A 2.560

SDBT0832 * 8g-15 x 32 1000 - P.O.A 3.100

BUTTON HEAD SELF DRILLING SCREW ZP

SDBTD0812 8g-18 x 12 1000 - P.O.A 1.600

SDBTD0816 * 8g-18 x 16 1000 - P.O.A 1.900

SDBTD0825 * 8g-18 x 25 1000 - P.O.A 2.510

SDBTD0830 * 8g-18 x 30 1000 - P.O.A 3.100

PANCAKE (FLAT TOP) HEAD SELF DRILLING SCREW ZP

SDFTD1016 10g-16 x 16 1000 - P.O.A 1.460



BUGLE HEAD NEEDLE POINT DRYWALL SCREW ZP

SDBG0625 6g-18 x 25 1000 - P.O.A 1.350

SDBG0632 6g-18 x 32 1000 - P.O.A 1.600

SDBG0641 * 6g-18 x 41 1000 - P.O.A 2.000

SDBG0645 * 6g-18 x 45 1000 - P.O.A 2.200

SDBG0751 7g-18 x 51 1000 - P.O.A 2.800

SDBG0865 8g-15 x 65 500 - P.O.A 2.100

SDBG0875 8g-15 x 75 500 - P.O.A 2.450

SDBG10100 * 10g -12 x 100 500 - P.O.A 2.300

BUGLE HEAD SELF DRILLING DRYWALL SCREW ZP

SDBGD0625 6g-20 x 25 1000 - P.O.A 1.500

SDBGD0632 6g-20 x 32 1000 - P.O.A 1.830

SDBGD0645 6g-20 x 45 1000 - P.O.A 2.500

BUGLE HEAD COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)

SPBG1040L * 10g-10 x 40 1000 - P.O.A 3.546

SPBG1050L 10g-10 x 50 1000 - P.O.A 4.320

SPBG1065L 10g-10 x 65 1000 - P.O.A 3.012



COLLATED BUGLE HD. NEEDLE POINT DRYWALL SCREW ZP

SDBGC0625 6g-18 x 25 1000 - P.O.A 1.610

SDBGC0632 6g-18 x 32 1000 - P.O.A 1.910

SDBGC0641 6g-18 x 41 1000 - P.O.A 2.300

COLLATED BUGLE HD. SELF DRILLING DRYWALL SCREW ZP

SDBGCD0625 6g-20 x 25 1000 - P.O.A 1.610

SDBGCD0632 6g-20 x 32 1000 - P.O.A 1.910

SDBGCD0641 6g-20 x 41 1000 - P.O.A 2.300

COLLATED BUGLE HD. COARSE NEEDLE POINT DRYWALL SCREW ZP

SDBGC0625C 6g-9 x 25 1000 - P.O.A 1.610

SDBGC0632C 6g-9 x 32 1000 - P.O.A 1.910

SDBGC0641C 6g-9 x 41 1000 - P.O.A 2.300

COLLATED BUGLE HD. COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)

SDBGC1040L * 10g-20 x 40 500 - P.O.A 3.456

SDBGC1050L * 10g-20 x 50 500 - P.O.A 2.330

FASTENERSFRAMING SCREWS

PLASTERBOARD SCREWS - LOOSE

PLASTERBOARD SCREWS - COLLATED





CSK. SELF EMBEDDING NEEDLE POINT VILLABOARD (FIBRE CEMENT) SCREW ZP

SVCS0820 8g-15 x 20 1000 - P.O.A 1.460

SVCS0830 8g-15 x 30 1000 - P.O.A 2.270

CSK. SELF EMBEDDING SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW ZP

SVCSD0820 8g-15 x 20 1000 - P.O.A 1.700

SVCSD0825 * 8g-15 x 25 1000 - P.O.A 1.920

SVCSD0830 8g-15 x 30 1000 - P.O.A 2.260

CSK. SELF EMBEDDING SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW GAL. CLASS 3

SVCSD0820G * 8g-18 x 20 1000 - P.O.A 1.740

SVCSD1030G 10g-16 x 30 1000 - P.O.A 2.260

CSK. SELF DRILLING BLUEBOARD (FIBRE CEMENT) WINGTEK SCREW, GAL. CLASS 3

SVCSD0832GW 8g-18 x 32 1000 - P.O.A 2.320



CSK. SELF EMBEDDING NEEDLE PT VILLABOARD / FIBRE CEMENT SCREW

SVCSC0820 8g-15 x 20 1000 - P.O.A 1.730

SVCSC0830 8g-15 x 30 1000 - P.O.A 2.330

CSK. SELF EMBEDDING DRILL PT VILLABOARD / FIBRE CEMENT SCREW

SVCSCD0820 8g-15 x 20 1000 - P.O.A 1.689

SVCSCD0830 * 8g-15 x 30 1000 - P.O.A 2.596



SELF DRILLING SCREW HEX HEAD ZP CLASS 2

(All screws fully threaded unless otherwise noted)

SRHD0820 * 8g-18 x 20 1000 - P.O.A 2.280

SRHD1016 10g-16 x 16 1000 - P.O.A 3.130

SRHD1020 * 10g-20 x 20 1000 - P.O.A 3.300

SRHD1220 * 12g-24 x 20 1000 - P.O.A 4.750

SELF DRILLING SCREW HEX HEAD GAL. CLASS 3

(All screws fully threaded unless otherwise noted)

SRHD0812G * 8g-18 x 12 1000 - P.O.A 1.800

SRHD1016G 10g-16 x 16 1000 - P.O.A 3.070

SRHD1020G * 10g-16 x 20 1000 - P.O.A 3.390

SRHD1025G 10g-16 x 25 1000 - P.O.A 3.880

SRHD1220G 12g-14 x 20 1000 - P.O.A 4.750

SRHD1235G 12g-14 x 35 500 - P.O.A 3.420

SRHD1245G 12g-14 x 45 500 - P.O.A 4.250

SRHD1275G 12g-14 x 75 200 - P.O.A 2.170

TYPE 17 SCREW HEX HEAD GAL. CLASS 3

SPH1225G * 12g-11 x 25 1000 - P.O.A 5.630

SPH1250G * 12g-11 x 50 500 - P.O.A 7.760



SELF DRILLING EXTENDED DRILL POINT HEX HEAD GAL. CLASS 3 SCREW

(All screws fully threaded)

SRHDE1232G 12g-24 x 32 500 - P.O.A 3.330

SRHDE1250G 12g-24 x 50 500 - P.O.A 4.440

SRHDE1265G 12g-24 x 65 250 - P.O.A 2.850

ROOFING SCREWS

FIBRE CEMENT SCREWS - LOOSE

FIBRE CEMENT SCREWS - COLLATED

EXTENDED DRILL POINT SCREWS - SERIES 500

All sizes also available with Neoprene Washer

All sizes also available with Neoprene Washer





Hooked Rod Suspension Anchor

CSA6-60 * 6mm x 60mm 100 - P.O.A 1.140

CSA6-120 6mm x 120mm 100 - P.O.A 2.530

Threaded Rod Suspension Anchor

CSA6-60-T6 M6 Thread - 6mm x 60mm 100 - P.O.A 1.858

Drive Pin Suspension Angle Bracket

BRDP * 25mm x 30mm 100 - P.O.A. 1.402

Part SUB SUB PRICE Approx


SRB06Z1 * M6 Booker Rod - Fully Threaded Zinc Plated x 1.0m 10 - P.O.A 1.800














N-M06 * M6 Nuts ZP 100 Box 100 - P.O.A 0.230






SSH-M10-25 * Set Screw (BOLT) M10 x 25mm ZP Hex Head - For framing brackets 150 - P.O.A 4.160

W1024 Washer 10 X 24 Zinc Plated - For framing brackets 100 - P.O.A 0.492



PATLSTS08 Staples 8mm Box of 2000 2000 - P.O.A -

PATLSTS10 Staples 10mm Box of 2000 2000 - P.O.A 0.274

PATLSTGS Staples Gun Heavy Duty "sheffield" 1 - P.O.A -

PATLSTG2 Sterling HD Staple Hammer Tacker 1 - P.O.A -



MBH065-56G Masonbolt 6.5 x 56 Gal.(M5) 100 - P.O.A 1.342

MBH08-40G Masonbolt 8 x 40 Gal.(M6) 100 - P.O.A 1.536

MBH08-65G * Masonbolt 8 x 65 Gal.(M6) 50 - P.O.A 1.820

MBH10-60G Masonbolt 10 x 60 Gal.(M8) 50 - P.O.A 1.920

MBH10-77G * Masonbolt 10 x 77 Gal.(M8) 50 - P.O.A 2.480

MBH12-75G Masonbolt 12 x 75 Gal. (M10) 50 - P.O.A 3.500

CEILING SUSPENSION ANCHORS

BOOKER ROD

METRIC BOLTS, NUTS & WASHERS

STAPLES

MASONBOLTS





MA25 6.5mm x 25 100 - P.O.A 0.900

MA30S * 6.0mm x 30 Stainless Pin 100 - P.O.A 0.874

MA32 6.5mm x 32 100 - P.O.A 1.150

MA32S * 6.5mm x 32 Stainless Pin 100 - P.O.A 1.000

MA40 6.5mm x 40 100 - P.O.A 1.140

MA50 6.5mm x 50 100 - P.O.A 1.380

MA75 * 6.5mm x 75 100 - P.O.A 1.950



NPM6.5-25 6.5mm x 25 100 - P.O.A 0.270

NPM6.5-40 6.5mm x 40 100 - P.O.A 0.380

NPM6.5-50 6.5mm x 50 100 - P.O.A 0.480

NPM6.5-75 6.5mm x 75 100 - P.O.A 0.810

NPM6.5-100 6.5mm x 100 50 - P.O.A 0.610

Part PACK SUB PRICE Approx


FWPR50 6mm x 50 RED 50 - P.O.A 0.070

FWPG50 7mm x 50 GREEN 50 - P.O.A 0.090

FWPB50 8mm x 50 BLUE 50 - P.O.A 0.110



RIV1 1/8" x 4.8mm 1000 - P.O.A 1.060

RIV2 1/8" x 6.4mm 1000 - P.O.A 1.040

RIV3 1/8" x 8.0mm 1000 - P.O.A 1.060

RIV4 1/8" x 9.6mm 1000 - P.O.A 1.130

DBJHD1/8Drill Bit- 1/8 Rivet Bits Double End

Pack of 1010 - P.O.A. 0.032

PATLRG1 Riveting Tool 1 - P.O.A 0.530



DB6-110 * Carbide Tip SDS Multi 6mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.040



DB6.5-110 * Carbide Tip SDS Multi 6.5mm x 110 (suits 50mm drilling depth) - 1 P.O.A 0.040

DB6.5-160 * Carbide Tip SDS Multi 6.5mm x 160 (suits 100mm drilling depth) - 1 P.O.A 0.040









Part SUB PRICE Drill.

No. PACK EACH Dia. Depth

DBCS5Shallow Cut Masonry Drill bit with

Counter Sink Depth Gauge1 P.O.A 5mm 9mm

NAIL IN PLUG - NYLON

WALL PLUGS

RIVETS

MASONRY MULTI FIT DRILL BITS

FIBRE CEMENT DRILL BIT

METAL PIN ANCHOR

Drill size required 6.5mm

Drill size required 6.5mm





PHILLIPS SCREWDRIVER BITSBITPS225 * No.2 x 25 (screw gun tips) 1 P.O.A 0.005

BITPS250 No.2 x 50 1 P.O.A 0.011

BITPS275 No.2 x 75 1 P.O.A 0.016

BITPS2100 * No.2 x 75 1 P.O.A 0.021

PHILLIPS DRYWALL BITSBITPSD225 No.2 x 25 (with stopper) 1 P.O.A 0.014

HEX SOCKET INSERT BITBITHI550 Hex Socket Insert Bit 5mm x 50mm 1 P.O.A 0.010

MAGNETIC HEX SOCKETSBITMHL1/4 65mm long for 1/4" Hex Head Screws 1 P.O.A 0.030

BITMHL5/16 65mm long for 5/16" Hex Head Screw 1 P.O.A 0.030

BITMHL3/8 65mm long for 3/8" Hex Head Screws 1 P.O.A 0.030

BITMHS1/4 * 42mm long for 1/4" Hex Head Screws 1 P.O.A 0.016

BITMHS5/16 * 42mm long for 5/16" Hex Head Screw 1 P.O.A 0.020

BITMHS3/8 * 42mm long for 3/8" Hex Head Screws 1 P.O.A 0.020

MAGNETIC BIT HOLDERBITMBH Two piece 1/4" x 54mm long 1 P.O.A 0.010



CW100-16S *Steel Slimline 100mm x 16mm Bore x

1mm Thick1 P.O.A 0.020

CW125-22 Steel 125mm x 22mm Bore 1 P.O.A 0.085

CW230-22 * Steel 230mm x 22mm Bore 1 P.O.A 0.284

CW350-25 Steel 350mm x 25mm Bore-H/S 1 P.O.A 0.700



CWG100-16Metal Grinding Wheel-Depressed

Centre 100mm x 16mm Bore1 P.O.A 0.120

CWG230-22Metal Grinding Wheel-Depressed

Centre 230mm x 22mm Bore1 P.O.A 0.600

10

10

10

10

10

10

10

10

STOCK

PACK

10

10

10

STOCK

PACK

10

10

GRINDING WHEELS

STOCK

PACK

10

10

10

10

10

10

BITS - PHILLIPS & HEX

CUT OFF WHEELS





RAMTF1200 * Trackfast Gas Tool 1 P.O.A 6.800

RAMTFBAT12 * Trackfast Battery 1 P.O.A 0.270

RAMTFGAS Trackfast Fuel Cell - Long 1 P.O.A 0.090

RAMTF15 Trackfast 15mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.280


RAMTF25 * Trackfast 25mm Pins Box 1000 with long fuel cell 1000 P.O.A 1.708




RAMTM * Trackmaster Pulsa Gas Tool 1 P.O.A 3.700

RAMTMBAT * Trackmaster Battery Pack 1 P.O.A 0.060

RAMTMGAS * Trackmaster Fuel Cell - Short 1 P.O.A 0.090

RAMTM15 Trakmaster 15mm Pins Box 500 with short fuel cell 500 P.O.A 0.656

RAMTM20 Trakmaster 20mm Pins Box 500 with short fuel cell 500 P.O.A 0.690



RAMT3IF * Ramset Insulfast GT3 Gas Fixing Tool 1 P.O.A 0.660

RAMT3IG6100 * 100mm Insulfast GT3 WHITE Insulation Fastener in box of 200 200 P.O.A 2.640


RAMT3IG625B * 25mm Insulfast GT3 BLACK Insulation Fastener in box of 400 400 P.O.A 0.660

RAMT3IG625G * 25mm Insulfast GT3 GREY Insulation Fastener in box of 400 400 P.O.A 0.660


RAMT3IG638G * 38mm Insulfast GT3 GREY Insulation Fastener in box of 350 350 P.O.A 0.660





-

STOCK

BOX

BOX

BOX

-

-

-

BOX

BOX

PACK

BOX

BOX

BOX

BOX

BOX

BOX

BOX

STOCK

PACK

-

-

-

-

-

-

RAMSET TRAKFAST™STOCK

PACK

RAMSET TRAKMASTER™

-

RAMSET INSULFAST™

Use the correct Pins for your application

15mm Pins - For fixing track to steel 19mm Pins - For fixing track to concrete





HEBEL® SLOTTED ANGLESBAS7550-120-27 * 75 x 50 x 1.2mm BMT 2700 200 1 P.O.A P.O.A 3.270

BAS5050-075-24 50 x 50 x 0.75mm BMT 2400 500 1 P.O.A P.O.A 1.486

HEBEL® TRACK76HDHT30 Track 50mm x 76mm x 50mm x 0.75mm (for 75mm Hebel Powerpanel) 3000 50 10 21.04 7.01 3.210

HEBEL® TOPHATTHB24-042-48 24mm x 0.42 BMT (cyclonic) 4800 200 1 13.26 2.76 1.800


THB35-055-48 * 35mm x 0.55 BMT 4800 100 5 P.O.A P.O.A 2.892

THB35-055-60 * 35mm x 0.55 BMT 6000 100 5 P.O.A P.O.A 3.616



SPBG1040L * 10g-10 x 40 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 3.546

SPBG1050L 10g-10 x 50 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 4.320

SPBG1065L 10g-10 x 65 Bugle Hd.Coarse ZP Cl.2 - 500 P.O.A 3.012

-

SPH1225G * 12g-11 x 25 Hex Head Gal. Class 3 - 1000 P.O.A 5.630




SPBG14100G *14g-10 x 100 Countersunk Self

Embedding Head. Gal. Class 3- 500 P.O.A 9.200

SPBG14150G *14-10 x 150 Countersunk Self

Embeding Head. Gal. Class 3- 250 P.O.A 9.200

SRHD1495G * Self Drill.Hex Hd. Screw Cl.3 Gal 14g-10 x 95 - 500 P.O.A 0.019

BITHI550Hex Socket Insert Bit 5mm x 50mm (To

suit SRCS14100G)10 1 P.O.A 0.010

SPBT1260 * 12g-8 x 60 Button Hd. Coarse ZP Cl.2 - 500 P.O.A 6.900



DUPTYV27 * DuPont Tyvek 2743 x 30m Roll - 1 P.O.A 5.000

DUPTYV30 * DuPont Tyvek 3048 x 30m Roll - 1 P.O.A 5.600

INFT4850R Foil Tape for Tyvek 48mm x 50m Roll - 1 P.O.A 0.552

CSR-HEBAD * CSR Hebel Adhesive 20kg Bag - 1 P.O.A 20.000

BOSFIREB1 Bostik Fireban One -600ml Sausage 20 1 P.O.A 0.950

BOSFIREC Bostik Firecaulk - 600ml Sausage 20 1 P.O.A 0.950

METAL SECTIONS for HEBEL®

MISCELLANEOUS

HEBEL FASTENERS

HEBEL® ACCESSORIES

BAS7550

For other tophat options see pages 19 to 22

BAS5050 76HDHT30 THB24 THB35



Part Thick R Batts m² per Price

No. (mm) Value Pack Pack $/m²

INGR015-4 * Glasswool Wall Batts R1.5 75mm x 430 x 1160 75 1.5 22 11.00 P.O.A








INGR125-4 * Glasswool Ceiling Batts R2.5 140mm x 430 x 1160 140 2.5 16 8.00 P.O.A








Part App Thick R Rolls m² per Price


INGBF13-15 * Anticon™ 55 Foil Faced Blanket R1.3 60mm x 1.2 x 15m Roof 60 1.3 1 18.00 P.O.A


INGBF18-15 * Anitcon™ 75 Foil Faced Blanket R1.8 80mm x 1.2 x 15m Roof 80 1.8 1 18.00 P.O.A



GLASSWOOL INSULATIONBradford Gold Thermal Wall Batts

Bradford Gold Thermal Ceiling Batts

Anticon™ Roofing Blanket

Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.

Bradford Anticon™ is a lightweight roofing blanket constructed from a glasswool blanket adhered to an impermeable reinforced reflective foil facing. It is designed as a Thermal insulation specifically for use in residential and commercial buildings. The thermofoil facing extends 150mm beyond one longitudinal edge of the blanket to provide an overlap when installed.





Bradford™ Glasswool Acoustigard Partition BattsINGBRP1150-4 * Bradford™ R1.2 11kg/50mm x 450 x 16.2m -3 rolls 21.9m2

50 1.2 3 21.90 P.O.A

INGBRP1150-6 * Bradford™ R1.2 11kg/50mm x 600 x 16.2m -2 rolls 19.4m250 1.2 2 19.40 P.O.A

INGBRP1175-4 * BradfordTM R1.7kg/75mm x 450 x 13.5m - 3 rolls 18.2m2 75 1.7 3 18.20 P.O.A

INGBRP1175-6 * Bradford™ R1.7 11kg/75mm x 600 x 13.5m - 2 rolls 16.2m275 1.7 2 16.20 P.O.A





Bradford Glasswool Partition Batts are a lightweight insulation product designed for the acoustic insulation of separating

walls and office partitions in buildings. Made from up to 80% recycled material, they provide an inexpensive, high

performance acoustic treatment for parititions and wall assemblies.

Part App Thick R Batts m² per Price


Bradford™ Fireseal Partition BattsINRWFPB1200 * Bradford™Rockwool 100mm Fireseal Partiwall Batt 168mmx1200mm Walls 100 2.7 5 0.84 P.O.A

INRWFPB50 * Bradford™ Rockwool 50mm Fireseal Partiwall Batt 120mm x 1200mm Walls 50 - 20 19.40 P.O.A

Part kg Thick R Pieces m² per Price

No. /m3 (mm) Value Pack Pack $/m²

Wall, Floor and Ceiling Batts INGSS16-4 * Sound Screen R1.6 60mm x 430 x 1350 - 60 1.6 6 3.48 P.O.A

INGSS16-6 * Sound Screen R1.6 60mm x 580 x 1350 - 60 1.6 6 4.70 P.O.A







Partition Batts - Acoustic

SoundScreen™ Plus

FIRESEAL PARTY WALL BATT

Bradford SoundScreen™ Plus combines the benefits of thermal insulation with the extra density to provide an insulation that reduces noise transfer in the home, as well as keeping it comfortable. It can be used in external and internal walls, ceilings and mid-floors to meet energy efficiency regulations.






INPR15-4 * 90 1.5 16 8.0 P.O.A

INPR15-6 * 90 1.5 16 10.8 P.O.A

INPR20-4 * 120 2.0 12 6.0 P.O.A

INPR20-6 * 120 2.0 12 8.1 P.O.A

INPR25-4 * 140 2.5 8 4.0 P.O.A

INPR25-6 * 140 2.5 8 5.4 P.O.A

INPR30-4 * 180 3.0 8 4.0 P.O.A

INPR30-6 * 180 3.0 8 5.4 P.O.A

INPR35-4 * 200 3.5 8 4.0 P.O.A

INPR35-6 * 200 3.5 8 5.4 P.O.A

Polymax Thermal Batts are designed to suit a wide range of building applications including roofs, walls, and ceilings.



INPRA15-4 * 75 1.5 16 8.0 P.O.A

INPRA15-6 * 75 1.5 16 10.8 P.O.A

INPRA20-4 * 90 2.0 12 6.0 P.O.A

INPRA20-6 * 90 2.0 12 8.1 P.O.A

INPRA25-4 * 90 2.5 8 4.0 P.O.A

INPRA25-6 * 90 2.5 8 5.4 P.O.A

Polymax Acoustic Thermal Batts -provide excellent thermal insulation with the added benefit of reduced noise transmission between

rooms and floors as well as external noise from traffic and aircraft.

Part Thick R Rolls m² per Price


INPASB2-4 * 50 0.8 4 29.34 P.O.A

INPASB2-6 * 50 0.8 2 19.38 P.O.A

INPASB3-4 * 65 1.0 4 29.34 P.O.A

INPASB3-6 * 65 1.0 2 19.89 P.O.A

INPASB4-4 * 75 1.2 4 29.34 P.O.A

INPASB4-6 * 75 1.2 2 19.89 P.O.A

INPASB5-4 * 85 1.4 4 24.48 P.O.A

INPASB5-6 * 85 1.4 3 24.88 P.O.A

INPASB6-4 * 100 1.7 2 12.24 P.O.A

INPASB6-6 * 100 1.7 2 16.59 P.O.A

Part Pack Batts m² per Price

No. Thick mm Pack Pack NRC $/m²

INPACB600 * Polymax Easy Baffle 600 x 1200 (fills 600mm high void) 450 8 5.76 0.90 P.O.A

POLYESTER INSULATION

Ceiling Baffle

Thermal BattsPolymax R1.5 - 90mm x 430 x 1160

Polymax R1.5 - 90mm x 580 x 1160

Polymax R2.0 - 120mm x 430 x 1160

Polymax R2.0 - 120mm x 580 x 1160

Polymax R2.5 - 140mm x 430 x 1160

Polymax R2.5 - 140mm x 580 x 1160

Polymax R3.0 - 180mm x 430 x 1160

Polymax R3.0 - 180mm x 580 x 1160

Polymax R3.5 - 200mm x 430 x 1160

Polymax R3.5 - 200mm x 580 x 1160

Acoustic Thermal BattsPolymax R1.5 Acoustic - 75mm x 430 x 1160

Polymax R1.5 Acoustic - 75mm x 580 x 1160





Polyester Sound BlanketPolymax MSB2 SoundBlanket 50 x 450 x 16.3m

Polymax MSB2 SoundBlanket 50 x 610 x 16.3m









Polymax Easy Baffle is designed to reduce room to room sound transfer through suspended ceiling voids. When placed between a concrete slab soffit and the top junction of a plasterboard partition wall, Polymax Easy Baffle can achieve a transmission reduction of 10 - 16 decibels across a range of frequencies and up to 9 decibels in speech range frequencies - the most common nuisance noise in commercial buildings.

Polymax Sound Blanket provides excellent sound and thermal performance, reducing noise and heat transfer between rooms.




(mm)

*

*

*

*

(mm)

*

*

*

*

*

*

*

*

*

*

*

*

*

*

(mm)

*

*

*

*

*

*

EARTHWOOL INSULATION

--55

Thick

INEBLF13-15 P.O.A18.00

m2

/Pack

Price

$/m2

Part

No.

R

Value

Sheets

/PackLD Foil Faced BlanketEARTHWOOL LD Foil Faced Blanket R1.3 55mm x 1.2 x 15m

Price

P.O.A

INEBLF25-10 105 - - 12.00 P.O.A

INEBLF18-15 75 - -

P.O.AINEBLF30-10 120 -

18.00

Part Thick

EARTHWOOL LD Foil Faced Blanket R2.5 105mm x 1.2 x 10m



Thermal Wall Batts

INER015-6 75 1.5 42 28.26 P.O.A

9.98 P.O.A

-

/Pack /Pack $/m2

R Sheets

No. Value

INER015-4 75 1.5 42 20.95 P.O.A

12.00

m2

INER020-6 75 2 20 13.46 P.O.A

INER020-4 75 2 20

INER021-6 90 2 32 21.53 P.O.A

INER021-4 90 2 32

EARTHWOOL R2.0 90mm x 580 x 1160

P.O.A

23 15.47 P.O.AEARTHWOOL R3.0 145mm x 580 x 1160INER130-6 145 3

2.5 14 6.98 P.O.A

INER025-6 90 2.5 14 9.42 P.O.A



INER025-4 90

No. Value /Pack /Pack $/m2

ThickPartAcoustic Batts

175EARTHWOOL R3.5 175mm x 430 x 1160 21 10.47 P.O.A

INER135-6 EARTHWOOL R3.5 175mm x 580 x 1160 175 3.5 21 14.13 P.O.A

3.5INER135-4

EARTHWOOL ACOUSTIC 14kg/50mm 600 x 1160INESC1450-6 50

EARTHWOOL ACOUSTIC 14kg/50mm 450 x 1160

- - 32.40 P.O.A

INESC1175-6 75 - - 22.67 P.O.A

INESC1150-6 50EARTHWOOL ACOUSTIC 11kg/50mm 600 x 2700


INESC1450-4 50 - - 19.84 P.O.A

INESC1475-4 75 - - 12.53 P.O.A

INESC1475-6 75 - - 12.53 P.O.A



- - 26.45

m2 Price

(mm) Value /Pack /Pack $/m2

P.O.A

R Sheets m2 Price

2.5 30 14.96 P.O.A

20.18 P.O.A125 2.5

11.47

EARTHWOOL R1.5 75mm x 430 x 1160mm

EARTHWOOL R1.5 75mm x 580 x 1160m



EARTHWOOL R2.0 90mm x 430 x 1160 15.96 P.O.A

INER130-4 145 3

Part

No.Ceiling Batts

Thick R Sheets




INER125-6

INER125-4 125

30

23

Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud.



(mm)

*

*

*

*

*

*

*

*

*

*

*

Other thicknesses available up to 100mm.

POLASTIC Insulation Sheet 10mm x 1200 x 2400 (2.88m2)


P.O.A

10 - - - P.O.A

P.O.A

16 - - - P.O.A

20 - - -POLAST20

12 - -



POLASTIC INSULATION

m2 Price

No. Value /Pack /Pack $/m2

Part

Polastic InsulationThick R Sheets

POLAST10

POLAST12

POLAST16

-

POLASTIC Seam Tape 50mm x 50m without logo

POLASTIC Seam Tape 75mm x 50m with logo

POLASTIC 75mm Tape Dispenser

POLASTIC Washers-Brown (for concrete) - -

-

POLAST07R 7 - - -

P.O.A

POLASPTP-075 - - - - P.O.A

POLASPTP-050 - - -

P.O.A

POLAST07 7 - - - P.O.APOLASTIC Insulation Sheet 7mm x 1200 x 2400 (2.88m2)

POLASTIC Insulation ROLL 7mm x 1200 x 24m (28.8m2)

- - P.O.APOLASPTD - -

- P.O.A

POLASPWP-002 - - - - P.O.A

POLASPWP-001 -

POLASTIC Washers-White (for timber)

Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud.



*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

Ramset insulation fasteners size range from 25mm to 100mm.

RAMT3IG625 1 box 1 box25mm Insulfast GT3 WHITE Insulation Fastener in box 400 P.O.A 0.66

No. PACK

SUB

1000 1000 P.O.A

P.O.A 0.66

PRICE Approx

1000 1000 P.O.A

1000 1000 P.O.A

1000 1000 P.O.A

EACH Kg/Piece

PRICE

EACH

P.O.A.

500 500 P.O.A

1000 1000 P.O.A

500 500 P.O.A

500 500 P.O.A

1000 1000 P.O.A

1000 1000 P.O.A63mm Self Adhesive Insulation Pins & Clips - Box of 1000

90mm Self Adhesive Insulation Pins & Clips - Box of 1000

FMPA63

FMPA90

FMPP110

FMPP140

FMPP165

FMPP19

Ramset Insulfast GT3 Gas fixing tool S/N 1

FMPP63

FMPP90

FMPP31

FMPP42

Part

Ramset Insulation Fixing Products PACK

31mm Perforated Base Insulation Pins & Clips - Box of 1000








1RAMT3IF

TPINSUL

No. PACK

Approx

Kg/Piece

SUBPart

0.60148

PACK

24mm x 50m Blue Duct/Insulation support tape^

Insulation Support Tape

1000 P.O.A

FMPA42 1000 1000 P.O.A

FMPA31 100031mm Self Adhesive Insulation Pins & Clips - Box of 1000


500 P.O.A

FMPA20 1000 1000 P.O.A

FMPA110 500110mm Self Adhesive Insulation Pins & Clips - Box of 500


INSULATION FIXINGSPart SUB Price

No. PACK $PACKInsulation Fixings

FMPA# FMPPA#

Faststud can supply a range of insulation fixings and clips. To obtain more information please contact



Part Width Length Pack m² per Price

No. mm m Qty Pack $/m²

INFTA001 * AIRCELL - Aluminium Foil Reinforced Tape 72mm x 50m Roll 72 50 - - P.O.A

INFTA002 * AIRCELL - White Foil Tape 72mm x 50m Roll 72 50 - - P.O.A

INFTA010 * AIRCELL - Spacer Biscuits - Bag of 50 - - 50 - P.O.A

INFTA020 * AIRCELL - Spacer Biscuits - Box of 400 - - 400 - P.O.A

INFTA100 * Retroshield ® Thermo Reflective Insulation 1350 22.25 - 30 P.O.A

INFTA200 * Glareshield ® Thermo Reflective Insulation with Anti-Glare 1350 22.25 - 30 P.O.A

INFTA300 * Insulaire ® Thermo Reflective with White Surface 1350 22.25 - 30 P.O.A

INFTA500 * Insulbreak ® 65 Thermal Break 6.5mm Thick 1350 22.25 - 30 P.O.A

INFTA600 * Insulbreak ® 80 Thermal Break 8.0mm Thick 1350 22.25 - 30 P.O.A

INFTA700 * Permishield® Breathable Insulation 6.5mm 1350 22.25 - 30 P.O.A

INFTA800 * Permishield® Breathable Insulation 8.0mm 1350 22.25 - 30 P.O.A

INFTA900 * Permifloor® Water Permeable Underfloor insulation 1350 33.4 - 45 P.O.A

MBFS * - - 200 - P.O.A

M82 * Non Adjustable Furring Channel clip for use with Aircell - - 250 - P.O.A

REFLECTIVE INSULATIONAIRCELL

KOOLTHERM® INSULATION

Bettafix Adjustable Furring Channel Clip with long neck for use with Aircell

KOOLTHERM - Insulation products available on request. Thickness range from 25mm to 100mm. Please contact Faststud sales for information and pricing.

Retroshield® Glareshield®

Insulaire®


MBFS M82

Tilt up concrete panel installation using Retroshield®

M324



Part Width Length Pack m² per Price

No. mm m Qty Pack $/m²

Fastwrap Extra Tough - for Metal / Tile Roof or WallsINFH13560 Sarking - XH Premium Roof & Wall Wrap 1350 x 60 1350 60 - 81 P.O.A

INFH15060 * Sarking - XH Premium Roof & Wall Wrap 1500 x 60 1500 60 - 90 P.O.A

INFH15030 Sarking - XH Premium Roof & Wall Wrap 1500 x 30 1500 30 - 45 P.O.A

Fastwrap Extra Tough Breather - Premium Wall WrapINFH13560B Sarking - XH Breather Premium Wall Wrap 1350 x 60m 1350 60 - 81 P.O.A

INFH15030B * Sarking - XH Breather Premium Wall Wrap 1500 x 30m 1500 30 - 45 P.O.A

Dupont Tyvek HomewrapDUPTYV27 * DuPont Tyvek Homewrap 2743mm x 30m roll 2743 30 - 82 P.O.A

DUPTYV30 * DuPont Tyvek Homewrap 3048mm x 30m roll 3048 30 - 91 P.O.A

Foil TapeINFT5050B No.400F FOIL TAPE Aluminium Foil 50mmx50m with backing 50 50 24 - P.O.A

INFT7550R Reinforced Foil Tape 75mm x 50m roll (1/16)^ 75 50 16 - P.O.A

INFT4850R No.439 FOIL TAPE REINFORCED for Tyvek 48mm x 50m roll 48 50 24 - P.O.A

SARKING

SARKING IN STOCK NOW AT GREAT PRICES. GET SOME WITH YOUR NEXT ORDER & SAVE

Silversark™ Extra Tough or SilverWrap™ Tough

R1.3

Silversark™ Extra Tough BREATHER or SilverWrap™ Tough

BREATHER R1.0

BRICK VENEER WALL WEATHERBOARD WALL

PITCHED TILE ROOF METAL ROOF

SilverSark™ Extra Tough R1.5 Summer R0.9 Winter

SilverSark™ Extra Tough R1.5 Summer R0.9 Winter

Total R values shown apply to typical site conditions and to the range of climatic conditions typical of mainland Australian capital cities. They have been calculated by an independent consulting engineer in accordance with Australia/New Zealand Standard AS/NZS 4859.1



STEEL SAFETY DATA SHEET

Other Products Safety Data Sheets for other products sold by Faststud are available upon request via our website.



(Reviewed: 27/06/15 Page 1 of 3 Form: AC 02-01-02

TERMS AND CONDITIONS (Version 5.10)

Payment terms 1. The terms of payment are strictly thirty (30) days from the end of month of invoicing

(or such other period as nominated by Specialised Stud Systems Pty Limited).

Specialised Stud Systems Pty Limited ABN 85 102 973 811 and its related bodies

corporate (as that term is defined in the Corporations Act 2001) (Supplier) may, at

any time, unilaterally vary the terms of trade in its absolute and unfettered discretion.

2. Should the Applicant not pay for the building supplies (goods) or services supplied

by the Supplier in accordance with the credit terms as provided herein, or as agreed in

writing by the Supplier from time to time, the Supplier will be entitled to charge an

administration fee of

(a) 10 percent of the amount of the invoice payable; and

(b) a further 10 percent per annum payable per year; or part thereof, until payment

by the Applicant.

Prices 3. Unless otherwise stated prices quoted are exclusive of GST and other duties and taxes

payable.

4. Prices quoted are firm for thirty (30) days from date of quotation.

5. The Application shall arrange and bear the costs of any delivery made ex Suppliers

store, including insurance and any other associated costs, unless otherwise agreed by

the Supplier.

Delivery 6. Any date or time quoted for delivery is an estimate only and the Supplier shall

endeavour to effect delivery at the time or times requested by the Application but

failure to do so shall not confer any right of cancellation or refusal of delivery on the

Applicant or render the Supplier liable for any loss or damages directly or indirectly

sustained by the Application as a result thereof.

7. The Applicant shall not be relieved of any obligation to accept or pay for products by

reason of any delay in delivery or any strike, lockout, unavailability of raw materials,

accidents to machinery, differences with workman, breakdowns, shortages of supplier

or labour, fires, floods, storms or tempest, transport delays, acts of God, restriction or

interventions imposed by any laws, regulations, governments or agencies thereof and

any other cause beyond the control of the Supplier or any other cause whatsoever.

8. The Supplier‟s obligation to deliver, if any, shall be discharged on arrival of the

products at the Applicant‟s nominated delivery destination, nominated transport

company, nominated agent or the address appearing on the invoice. The Applicant

shall unload the products upon delivery, provided that if the Applicant is unable or

unwilling to accept physical delivery of the products when the products are ready for

delivery the Supplier shall be entitled to charge a fee for any delay experience or

arrange for storage of the products at the risk and cost of the Applicant including all

transportation, storage and other consequential costs.

9. The Supplier may at its discretion make and invoice partial deliveries and each partial

delivery shall be a separated sale pursuant to these Terms and Conditions of Sale. The

Supplier reserves the right to charge a handling fee for orders less than $100.00 and if

less than $500.00 for a reseller or where express freight or special packaging

required.

Inspection and claims 10. The Applicant shall examine the products immediately after delivery and the

Supplier shall not be liable for any claims for misdelivery, shortage, defect unless

the Supplier receives details in writing within seven (7) days of the date of

delivery of the products and services.

Warranty 11. Subject to payment in full being made as defined in clauses 35 and 36, the

Supplier shall as a non manufacturer use its endeavours to pass on to the

Applicant the benefit of any warranties or guarantees it receives in respect of

products or parts thereof supplied to the Applicant provided the products or parts

thereof have been installed in accordance with the manufacturers‟ recommendations

or specifications or relevant Australian Standards. Such warranties or guarantees

exclude liability for any special, consequential, direct or indirect loss, damage harm

or injury suffered as a result of any product defect to the extent permitted by law

and shall be restricted to any one or more of the following:

(a) repair the defective goods free of charge or,

(b) replace the defective goods or part of those goods, or

(c) supply equivalent replacement goods, or

(d) credit the Applicant such amount as the manufacturer in its sole discretion

considers reasonable having regard to the price paid for the goods and the use

of the goods enjoyed by the Applicant.

Limitation of liability 12. These Terms do not exclude, restrict or modify the application of any provisions of

any Commonwealth, State or Territorial Law which by law cannot be excluded,

restricted or modified.

13. In no circumstances will the Supplier incur any liability in respect of or arising out

of or in connection with any special, consequential, direct or indirect loss, damage,

harm or injury suffered or incurred by the Applicant.

(a) Sale to Non-Consumers

(i) In the case of products supplied by the Supplier to a Applicant who is not

a “consumer” (as defined in the Competition Consumer Act 2010 as

amended from time to time (the Act)), if the products do not correspond

with the description of them on the invoice or are defective, then

provided that the products are preserved intact and made available for

inspection by a representative of the Supplier and are returned to the

Supplier in the same order and condition as that in which they were

delivered, the Supplier shall at its option:

(a) replace the goods or supply similar goods;

(b) repair the goods; or

(c) provide the cost for replacing the goods or for acquiring equivalent

goods.

but any claim in this respect must be made in writing within seven

(7) days of the date of delivery of those products.

(ii) Should the Applicant seek indemnity from the Supplier in respect of any

claim by a consumer on the warranty implied by the Act in a contract for the

supply of products by the Applicant to that consumer, sub-paragraph (i) will

not apply and in respect of products that are of a kind ordinarily acquired for

personal, domestic or household use or consumption (“consumer goods”),

the Supplier liability is limited to indemnifying the Applicant in accordance

with the Act, limited to a liability to pay to the Applicant an amount equal to

the cost of replacing the products or the cost of obtaining equivalent products

or the cost of having the products repaired, whichever is the lesser amount.

(b) Sales to Consumers

In the case of products supplied by the Supplier to a Applicant who is a

consumer, to the extent that the products are not consumer products or goods,

the liability of the Supplier to the Applicant for breach of any warranty or

condition (other than a warranty or condition implied by section 51-53 of the

Act) or for breach of any duty of care shall in all cases be limited, at the

option of the Supplier to any one or more of the replacement of the products

or the supply of equivalent products, the repair of the products, the payment of

the cost of replacing the products or acquiring equivalent products or the

payment of the cost of having the product repaired.

(c) Except for those conditions and warranties implied by the Act or other sale of

products or consumer protection legislation which may not be excluded, the

Applicant agrees that:

(i) It has not relied on any inducement, representation or statement made by or

on behalf of the Supplier in purchasing the products and there are no

implied conditions or warranties herein and no collateral contracts in

connection herewith (except such as may be in writing and signed by a

duly authorised representative of the Supplier); and

(ii) This clause sets out the entire liability of the Supplier in respect of its

liability under the Act or otherwise in respect of liabilities to the

consumer for a breach of a condition or warranty with respect to the sale

of products or goods.

14. The applicant, or Customer as the case may be, releases and discharges the

Supplier from any claim arising out of or in connection with the installation

and/or finishing of the Supplier product supplied by the Supplier and indemnifies

and holds harmless the Supplier in respect of any such claim.

15. Any claim in connection with any act, default or omission (including any breach

of contract or breach of duty including, but not limited to, negligence) on the part of

the Supplier must be notified to the Supplier in accordance with clause 10 otherwise:

(a) the Supplier shall not be liable on the claim; and

(b) the Applicant or applicant, as the case may be, hereby releases and

indemnifies the Supplier in respect of any such claim.

16. The liability of the Supplier in respect of any claim notified under the preceding

clause shall be limited to the cost of the product supplied by the Supplier.

17. These terms do not exclude, restrict or modify the application of any provision of any

Commonwealth, State or Territorial law which, by law, cannot be excluded,

restricted or modified.

Returns 18. Other than in respect of the Supplier‟s obligations pursuant to c lause 13 hereof,

the Supp l ie r shall not be liable to accept any returned products but may in its

absolute discretion accept the return of products provided that such products shall

only be accepted for credit and with the prior written approval of a duly authorised

representative of the Supplier Products returned for credit pursuant to this clause

must be returned with packing slip and invoice and will be subject to a handling and

administration charge equivalent to fifteen percent (15%) of the invoiced value of the

returned products. Return freight and other expenses will be paid for by the

Applicant and no returns of non standard products will be accepted.

Supply 19. The Supplier reserves the right to decline any order for products when the size of

the order or the requested delivery date inhibits or prejudices the Supplier‟s ability

to fulfil its contractual commitments to its franchisees, licensees or other

Applicants.

Advertising 20. The Applicant shall not advertise in any media the sale or disposal of products and

services purchased from the Supplier, without the written consent of a duly

authorised Representative of the Supplier. The Applicant shall indemnify and hold

indemnified the Supplier against any liability including any special, consequential,

direct or indirect loss, damage harm or injury suffered as a result of false,

misleading or deceptive advertising and untrue representation or statements made to

any person by the Applicant in the course of advertising. The Applicant further

warrants and acknowledges that it will not use any existing logo or brand name of

the Supplier or used by the Supplier or that similar to, or attempt to register a trade

mark or trade name or that similar to those of the Supplier without the written

consent of a duly authorised Representative of the Supplier.

Intellectual property 21. The Applicant shall indemnify and hold indemnified the Supplier against any

claim, suit, proceedings or demand made by a third party for loss, damage, suffered

whether directly or indirectly by infringement of its intellectual property rights.

Pallets and gluts 22. Unless otherwise stated, gluts, pallets and containers used to deliver products to

the Applicant, will remain the exclusive property of the Supplier and shall be

returned to the Supplier at the Applicant‟s expense within thirty (30) days of the

date of delivery. The Supplier reserves the right to invoice the Applicant for any

glut, pallet or container not returned by the due date.

Jurisdiction 23. The Applicant acknowledges and agrees that this agreement will be governed by the

laws of New South Wales, and the laws of the Commonwealth of Australia which are

in force in New South Wales.


24. The Applicant acknowledges and agrees that any contract for the supply of goods or

services between the Supplier and the Applicant is formed at the address of

the Supplier.

25. The parties to this agreement submit to the non-exclusive jurisdiction of the courts of

New South Wales and the relevant federal courts and courts competent to hear

appeals from those courts.

Security/charges 26. The Applicant charges in favour of the Supplier all of its estate and interest in any

real property that the Applicant owns at present and in the future with the amount of

its indebtedness hereunder until discharged.

27. The Applicant charges in favour of the Supplier all of its estate and interest in any

personal property that the Applicant owns at present and in the future with the

amount of its indebtedness hereunder until discharged.

28. The Applicant appoints as its duly constituted attorney the Supplier's company

secretary from time to time to execute in the Applicant's name and as the Applicant's

act and deed any real property mortgage, bill of sale or consent to any caveat the

Supplier may choose to lodge against real property that the Applicant may own in

any Land Titles Office in any state or territory of Australia, even though the

Applicant may not have defaulted in carrying out its obligations hereunder.

29. Where the Applicant has previously entered into an agreement with the Supplier by

which the Applicant has granted a charge, mortgage or other security over real or

personal property, those charges, mortgages or other security interests will continue

and co-exist with the obligations and security interests created in this agreement. The

Supplier may, at its election, vary the terms of such previous charges, mortgages or

other securities to reflect the terms herein.

Purpose of credit 30. The Applicant acknowledges and agrees that the credit to be provided to the

Applicant by the Supplier is to be applied wholly or predominantly for commercial

purposes.

Formation of contract 31. Quotations made by the Supplier will not be construed as an offer or obligation to

supply in accordance with the quotation. The Supplier reserves the right to accept or

reject, at its discretion, any offer to purchase received by it.

32. Placement of an order, either verbally or in writing, will constitute an offer to

purchase by the Applicant and will imply acceptance of these terms and conditions.

33. The Applicant‟s indebtedness to the Supplier, whether in full or in part, will not be

discharged by the operation of clause 37 hereof unless and until the funds held on

trust are remitted to the Supplier.

34. If the Applicant cancels or alters any order for products after the Supplier has

received the order then the Supplier reserves the right to charge to the Applicant the

additional costs incurred in cancelling or altering any order or part order together

with the costs of any labour and handling to the date of such cancellation or

alterations.

Retention of title 35. Whilst the Applicant has not paid for the goods supplied in full at any time, the

Applicant agrees that property and title in the goods will not pass to the Applicant

and the Supplier retains the legal and equitable title in those goods supplied and not

yet sold.

36. Until payment in full has been made to the Supplier, the Applicant will hold the

goods in a fiduciary capacity for the Supplier and agrees to store the goods in such a

manner that they can be identified as the property of the Supplier, and will not mix

the goods with other similar goods.

37. The Applicant will be entitled to sell the goods in the ordinary course of its business,

but until full payment for the goods has been made to the Supplier, the Applicant will

sell as agent and bailee for the Supplier and the proceeds of sale of the goods will be

held by the Applicant on trust for the Supplier absolutely.

38. The right to on-sell, deal or otherwise disposed of the Supplier‟s goods in the normal

course of trade may be revoked at any time and shall automatically cease if a receiver

is appointed over any of the assets or the undertaking of the Applicant or if a winding

up order is made against the Applicant or if the Applicant goes into voluntary

administration or liquidation (otherwise than for the purpose of reconstruction or

amalgamation) or calls a meeting of creditors or makes any arrangements or

composition or commits any act of bankruptcy or where the Applicant is in default of

any of its obligations to the Supplier.

39. The Supplier licences the Applicant to sell goods and to sell goods manufactured

using products of the Supplier. If the goods are affixed to other material, the totality

thereof shall be the sole and exclusive property of the Supplier until payment as

defined in clause 1 has been made in full to the Supplier, unless the other material or

part thereof are or is the property of a party or parties other than the Applicant in

which case the totality thereof shall be deemed to be owned as tenants in common

with such other party other than the Applicant in shares corresponding to the

respective amounts paid or payable by the Applicant is respect of such other party or

parties.

40. The Applicant‟s indebtedness to the Supplier, whether in full or in part, will not be

discharged by the operation of clause 37 hereof unless and until the funds held on

trust are remitted to the Supplier.

41. The Applicant agrees that whilst property and title in the goods remains with the

Supplier, the Supplier has the right, with or without prior notice to the Applicant, to

enter upon any premises occupied by the Applicant (or any receiver, receiver and

manager, administrator, liquidator or trustee in bankruptcy of the Applicant) to

inspect the goods of the Supplier and to repossess the goods which may be in the

Applicant‟s possession, custody or control when payment is overdue.

42. The Applicant will be responsible for the Supplier‟s costs and expenses in exercising

its rights under clause 41. Where the Supplier exercises any power to enter the

premises, that entry will not give rise to any action of trespass or similar action on the

part of the Applicant against the Supplier, its employees, servants or agents.

43. The Applicant agrees that where the goods have been retaken into the possession of

the Supplier, the Supplier has the absolute right to sell or deal with the goods, and if

necessary, sell the goods with the trademark or name of the Applicant on those

goods, and the Applicant hereby grants an irrevocable licence to the Supplier to do all

things necessary to sell the goods bearing the name or trademark of the Applicant.

44. The Applicant will be responsible for the Supplier‟s costs and expenses in exercising

its rights under clause 41. Where the Supplier exercises any power to enter the

premises, that entry will not give rise to any action of trespass or similar action on the

part of the Applicant against the Supplier, its employees, servants or agents.

45. For the avoidance of doubt, the Supplier‟s interest constitutes a „purchase money

security interest‟ pursuant to the Personal Property Securities Act 2009.

Cancellation of terms of credit 46. The Supplier reserves the right to withdraw credit at any time, whether the Applicant

is in default under the terms of this agreement or not.

47. Upon cancellation with or without notice all liabilities incurred by the Applicant

become immediately due and payable to the Supplier.

Indemnity 48. The Applicant agrees to indemnify the Supplier and keep the Supplier indemnified

against any claim. This indemnity includes any legal fees and expenses the Supplier

incurs in order to enforce its rights, on an indemnity basis.

Provision of further information 49. The Applicant undertakes to comply with any request by the Supplier to provide

further information for the purpose of assessing the Applicant‟s creditworthiness,

including an updated credit application.

50. If the Applicant is a corporation (with the exception of a public listed company), it

must advise the Supplier of any alteration to its corporate structure (for example, by

changing directors, shareholders, or its constitution). In the case of a change of

directors or shareholders the Supplier may ask for new guarantors to sign a guarantee

and indemnity.

Corporations 51. If the Applicant is a corporation, the Applicant warrants that all of its directors have

signed this agreement and that all of its directors will enter into a guarantee and

indemnity with the Supplier in relation to the Applicant's obligations to the Supplier.

Trustee capacity 52. If the Applicant is the trustee of a trust (whether disclosed to the Supplier or not), the

Applicant warrants to the Supplier that:

(a) the Applicant enters into this agreement in both its capacity as trustee and in its

personal capacity;

(b) the Applicant has the right to be indemnified out of trust assets;

(c) the Applicant has the power under the trust deed to sign this agreement; and

(d) the Applicant will not retire as trustee of the trust or appoint any new or

additional trustee without advising the Supplier.

53. The Applicant must give the Supplier a copy of the trust deed upon request.

Partnership 54. If the Applicant enters into this agreement as partners, the Applicant warrants that all

of the partners have signed this agreement and that all of the partners will enter into a

guarantee and indemnity with the Supplier in relation to the Applicant's obligations to

the Supplier.

55. If the Applicant is a partnership, it must not alter its partnership (for example, adding

or removing partners or altering its partnership agreement) without advising the

Supplier. In the case of a change of partners, the Supplier may ask for new

guarantors to sign a guarantee and indemnity.

Insolvency 56. If the Applicant becomes insolvent, the Applicant remains liable under this

agreement for payment of all liabilities incurred hereunder. The Applicant remains

liable under this agreement even if the Supplier receives a dividend or payment as a

result of the Applicant being insolvent.

Waiver 57. A waiver of any provision or breach of this agreement by the Supplier must be made

by an authorised officer of the Supplier in writing. A waiver of any provision or

breach of this agreement by the Applicant must be made by the Applicant's

authorised officer in writing.

58. Until ownership of the goods passes, the Applicant waives its rights it would

otherwise have under the PPSA:

(a) under section 95 to receive notice of intention to remove an accession;

(b) under section 118 to receive notice that the Supplier intends to enforce its

security interest in accordance with land law;

(c) under section 121(4) to receive a notice of enforcement action against liquid

assets;

(d) under section 129 to receive a notice of disposal of goods by the Supplier

purchasing the goods;

(e) under section 130 to receive a notice to dispose of goods;

(f) under section 132(2) to receive a statement of account following disposal of

goods;

(g) under section 132(4) to receive a statement of account if no disposal of goods

for each 6 month period;

(h) under section 135 to receive notice of any proposal of the Supplier to retain

goods;

(i) under section 137(2) to object to any proposal of the Supplier to retain or

dispose of goods;

(j) under section 142 to redeem the goods;

(k) under section 143 to reinstate the security agreement; and

(j) under section 157(1) and 157(3) to receive a notice of any verification

statement.

Costs 59. The Applicant must pay for its own legal, accounting and business costs and all costs

incurred by the Supplier relating to any default by the Applicant. The Applicant must

also pay for all stamp duty and other taxes payable on this agreement (if any).

60. The Applicant will pay the Supplier‟s costs and disbursements incurred in pursuing

any recovery action, or any other claim or remedy, against the Applicant, including

debt recovery fees and legal costs on an indemnity basis. Such costs and

disbursements will be due and payable by the Applicant to the Supplier irrespective

of whether pursuit of the recovery action, claim or remedy is successful.


61. The Applicant acknowledges and agrees that payments by the Applicant will be

applied by the Supplier as follows.

(a) Firstly, in payment of any and all collection costs and legal costs in accordance

with clauses 41 and 60.

(b) Secondly, in payment of any interest incurred in accordance with clause 64.

(c) Thirdly, in payment of the outstanding invoice(s).

Taxes and duty 62. The Applicant must pay GST on any taxable supply made by the Supplier to the

Applicant under this agreement. The payment of GST is in addition to any other

consideration payable by the Applicant for a taxable supply.

63. If as a result of:

(a) any legislation becoming applicable to the subject matter of this agreement; or

(b) any changes in legislation or its interpretation by a court of competent

jurisdiction or by any authority charged with its administration;

the Supplier becomes liable to pay any tax, duty, excise or levy in respect

of the amounts received from the Applicant, then the Applicant must pay the Supplier these additional amounts on demand.

Interest rates 64. The interest rate on any outstanding debts is a fixed rate of 15 percent per annum.

Set-off 65. All payments required to be made by the Applicant under this agreement will be

made free of any set-off, or counterclaim and without deduction or withholding.

66. Any amount due to the Supplier from time to time may be deducted from any monies

which may be or may become payable to the Applicant by the Supplier.

Electronic and other communications 67. (a) The Applicant agrees to accept service of notices, statutory notices and Court

documents via email in addition to any and all other valid forms of service.

(b) In addition to delivery in person, via post and via facsimile, the Applicant agrees

to have invoices sent by email.

(c) The Applicant agrees that email communications from the Supplier to the

Applicant constitute an “electronic communication” within the meaning of the

Electronic Transactions Act 2000 (NSW).

(d) The Applicant agrees that in agreeing to receive invoices by email, and the

service of notices, statutory notices and Court documents via email, the

Applicant is in both instances designating “an information system for the

purpose of receiving electronic communications” within the meaning of the

Electronic Transactions Act 2000 (NSW).

(e) The Applicant agrees that evidence of the “despatch” (within the meaning of the

Electronic Transactions Act 2000 (NSW)) by the Supplier of an email is also

prima facie evidence of the “receipt” of the email by the Applicant within the

meaning of the Act. Unless the contrary is proven the time of receipt will be

deemed to be twenty (20) seconds after the time of the “despatch” of the

email.

Miscellaneous 68. The Supplier is not liable for any loss caused to the Applicant by reason of strikes,

lockouts, fires, riots, war, embargoes, civil commotions, acts of God or any other

activity beyond the Supplier's control.

69. In relation to the supply of goods, the Supplier‟s liability is limited to:

(a) replacing the goods or supplying similar goods;

(b) repairing the goods;

(c) providing the cost for replacing the goods or for acquiring equivalent goods; and

(d) providing the cost for having the goods repaired.

70. In relation to the supply of services, the Supplier‟s liability is limited to:

(a) supplying the service again; or

(b) providing for the cost of having the services supplied again.

71. The Supplier is not liable, whether claims are made or not, for loss of profit,

economic or financial loss, damages, consequential loss, loss of opportunity or

benefit, loss of a right or any other indirect loss suffered by the Applicant.

72. The Applicant will, at the request of the Supplier, execute documents and do such

further acts as may be required for the Supplier to register the security interest

granted by the Applicant under the PPSA.

73. The Applicant agrees to accept service of any document required to be served,

including any notice under this agreement or the PPSA or any originating process, by

prepaid post at any address nominated in this application or any other address later

notified to the Supplier by the Applicant or the Applicant‟s authorised representative.

74. The Applicant further agrees that where we have rights in addition to those under part

4 of the PPSA, those rights will continue to apply.

75. The Applicant irrevocably grants to the Supplier the right to enter upon the

Applicant‟s property or premises, without notice, and without being in any way liable

to the Applicant or to any third party, of the Supplier has cause to exercise any of

their rights under sections 123 and/or 128 of the PPSA, and the Applicant shall

indemnify the Supplier from any claims made by any third party as a result of such

exercise.

76. Nothing in this agreement shall be read or applied so as to purport to exclude, restrict

or modify or have the effect of excluding, restricting or modifying the application in

relation to the supply of any goods and/or services pursuant to this agreement of all or

any of the provisions the Competition and Consumer Act 2010 or any relevant State

or Federal Legislation which by law cannot be excluded, restricted or modified.

77. The Supplier shall not be liable for any failure or delay to supply or deliver the goods

where such failure or delay is wholly or partly due to cause or circumstances

whatsoever outside the reasonable control of the Supplier including, but not limited

to, war, strikes, lockouts, industrial disputes or unrest, government restrictions or

intervention, transport delays, fire, act of God, breakdown of plant, shortage of

supplies or labour, storm or tempest, theft, vandalism, riots, civil commotions or

accidents of any kind.

Severance 78. If any provision of this agreement is not enforceable in accordance with its terms,

other provisions which are self-sustaining are, and continue to be, enforceable in

accordance with their terms.

79. If any part of this agreement is invalid or unenforceable, that part is deleted and the

remainder of the agreement remains effective.

Variation 80. The Applicant agrees that these terms and conditions may be varied, added to, or

amended by an authorised officer of the Supplier at any time by written notice to

the Applicant.

81. Any proposed variation to these terms and conditions by the Applicant must be

requested in writing. The Supplier may refuse any such request without providing

reasons either orally or in writing.

Consent to register 82. The Applicant hereby consents to the Supplier recording the details of this

Agreement on the Personal Property Securities Register and agrees to do all things

necessary and reasonably required by the Supplier to effect such registration.

83. The Applicant waives any right or entitlement to receive notice of the registration of

any security interest(s) created by this instrument on the Personal Property Securities

Register.

Entire agreement 84. This agreement constitutes the entire agreement between the parties relating in any

way to its subject matter. Subject to clause 29 all previous negotiations,

understandings, representations, warranties, memoranda or commitments about the

subject matter of this agreement are merged in this agreement and are of no further

effect. No oral explanation or information provided by a party to another affects the

meaning or interpretation of this agreement or constitutes any collateral agreement,

warranty or understanding.

85. Notwithstanding the preceding paragraph, in circumstances where there is a pre-

existing written credit agreement (Original Agreement) between the Applicant and

the Supplier, these terms and this agreement will constitute a variation of the Original

Agreement whereby the terms of the Original Agreement are deleted and replaced

with the terms herein, unless the terms of the Original Agreement are otherwise

expressly or implicitly preserved by the terms herein in which case they will co-exist

with the terms herein, and, to the extent of any inconsistency, these terms will

prevail.

Privacy Act 86. The Applicant agrees to the terms of the Privacy Statement pursuant to the Privacy

Act 1988 (as amended by the Privacy Amendment (Enhancing Privacy Protection)

Act 2012 contained in this document.

SPECIALISED STUD SYSTEMS PTY LTDTM 2015 PRODUCT CATALOGUE 1300 88 FAST SPECIALISED STUD SYSTEMS PTY...

Documents

Transcript of SPECIALISED STUD SYSTEMS PTY LTDTM 2015 PRODUCT CATALOGUE 1300 88 FAST SPECIALISED STUD SYSTEMS PTY...