Spec of SolidDigi UHF RFID Reader

5
1 / 5 TTL UART/USB Long Range UHF RFID reader Module (ISO18000-6C EPC G2) Datasheet SolidDigi Technologies, Inc. August 2011 www.soliddigi.com SOLID Digital Technologies

description

SolidDigi UHF RFID Reader EPC GEN-2.Long Range UHF RFID Reader is an important way to read information and inputinformation. Automatic identification technology has been developed in recent years.Now it is a new high technology which includes barcode technology, magnetic strip(card) technology, RF technology, optical character recognition technology, andbiological recognition, distance Card Reader and etc.In normal case, UHF RFID tags need less power than the reader which needs to havehigh receiving sensitivity. In certain system, the transmit path and receive path areindependent of each other in the reader, especially when the uplink and downlinkhave different frequency.Technically, different applications can choose different transmit power. However,there are regulations that need to be met. Usually the RF power 100mW~500mW issuitable for all kinds of RFID distance reader system. In different regions and areas,the reader has to follow different regulations.SolidDigi long distance reader has many advantages such as: compatibility withdifferent protocols, high reading speed multi-tags reading, linearly polarized antenna,waterproof appearance designing and etc. It can be widely used in RFID systems, andis very friendly to further development based on it.

Transcript of Spec of SolidDigi UHF RFID Reader

1 / 5

TTL UART/USB

Long Range UHF RFID reader Module

(ISO18000-6C EPC G2)

Datasheet

SolidDigi Technologies, Inc.

August 2011

www.soliddigi.com SOLID Digital Technologies

2 / 5

TTL UART Long Range UHF RFID reader Module (ISO18000-6C EPC G2) is an important

way to read information and input information. Automatic identification technology has been

developed in recent years. Now it is a new high technology which includes barcode

technology, magnetic strip (card) technology, RF technology, optical character recognition

technology, and biological recognition, distance Card Reader and etc.

In normal case, UHF RFID tags need less power than the reader which needs to have high

receiving sensitivity. In certain system, the transmit path and receive path are independent

of each other in the reader, especially when the uplink and downlink have different

frequency.

Technically, different applications can choose different transmit power. However, there are

regulations that need to be met. Usually the RF power 100mW~500mW is suitable for all

kinds of RFID distance reader system. In different regions and areas, the reader has to

follow different regulations.

Linksprite UHF RFID distance reader has many advantages such as: compatibility with

different protocols, high reading speed multi-tags reading, linearly polarized antenna,

waterproof appearance designing and etc. It can be widely used in RFID systems, and is

very friendly to further development based on it.

Typical applications:

� Logistics and warehouse management: Management of goods flow and storage, and

mail, package, luggage transportation and etc.

� Intelligent parking management:Parking management and charge automation.

� Production-line management: Identification of production process points.

� Product anti-counterfeiting detection: the write protection from tag’s internal memory

can be used to detect the products’ authenticity

� Other application: widely used in club management, libraries, student status,

consumption management, swimming pool management and etc.

www.soliddigi.com SOLID Digital Technologies

3 / 5

When the UHF RFID reader (USB version) is powered on and connected to PC, it can be

identified by the PC. It uses the HID USB driver, and doesn’t need additional USB driver. It

means the reader is working normally. When the tag is close to the reader, the PC

software will show signal strength and tag ID. This RFID reader can identify many tag IDs at

the same time.

Note: It needs a 3V/2A wall adapter.

This UHF RFID reader uses RF energy harvest to read tag data. Keep it far away from

metal when use it. If it closes to the metal, the RF wave will be absorbed by it which can

shorten the distance of card reading. The installation position should be away from the

equipment like motor, transformer and etc, to reduce the effect on the reader.

According to the actual needs, this UHF RFID reader can be with the most suitable

directional antenna with appropriate gain (5.5dBi, 8dBi and etc) to achieve the best

performance.

There are two different interfaces: TTL UART and USB.

Specifications

Working Frequency

China standard (920~925MHz), American standard

(902~928MHz), European standard (865~868MHz) ,

840MHz~960MHz working frequency

Protocol ISO18000-6C (EPC GEN2), compatible ISO18000-6A/B

RF power MAX 20dBm

Card reading distance Passive tags identification distance adjusting range:1 to 6 meters

Card reading time Reading time of multi-tags 64 bit ID <6ms

Modulation mode ASK or PR-ASK

Antenna interface MMCX

Supporting interface High speed USB or TTL Uart (RS232) communicate with PC

applications

Working power DC+3.3V 2A; +5.5V optional

Read indicator Can be programmed. GPIO output can be set

Power 1.5W-2W

Working temperature -20 degree C +80 degree C

Storage temperature -40 degree C to +125 degree C

Working humidity 20% to 95 % (No condensation)

Dimensions 90mm×49mm×0.51mm

Antenna dimensions 8”× 12”×2”

www.soliddigi.com SOLID Digital Technologies

4 / 5

For TTL Version, the UART definition is as following:

www.soliddigi.com SOLID Digital Technologies

5 / 5

SolidDigi Technoliges, Inc.

Add: Room 310, Building A of Nano Sensor Park, 200 Linghu Ave, Taihu

International Science Technology Park, New District, WuXi, JiangSu, China

Tel: +86-510-85387391

FAX: +86-510-85387691 E-mail: [email protected]

www.soliddigi.com SOLID Digital Technologies